Used Glue Press for sale (13,171)

Condition: used, Year of construction: 1970, Pressure 063 t throat 250 mm stroke 8 - 100 mm no. of strokes 120 /min distance table/ram, max. stroke up, adjustment up 415 mm table surface area 700 x 500 mm hole in the table 250 mm table height over floor 800 mm Dedpfxjynmn Ne Am Tekp passage to the back 320 mm ram surface 450 x 280 mm ram adjustment 63 mm power requirement 4,0 kW weight 4,5 t Dimensions (WxDxH) 1,6 x 2,0 x 2,8 m SPECIAL DEAL as is where is WITHOUT putting into operation / WITHOUT additional work

Condition: used, Year of construction: 1990, pressure 160 t stroke 200 mm Dkedpfxjwvva Ss Am Tjp throat 500 mm dayligth 500 mm table surface area 1140 x 980 mm table height over floor 860 mm ram surface 1000 x 800 mm oil volume 1000 l power requirement 50,0 kW Weight 18,0 t dimensions of the machine ca. 1,3 x 2,6 x 3,4 mxmxm hole in the table 180 mm yom 1981 - modernization 1990 with oil-hydraulic drive, controllable dependent on pressure/time and way, hydraulic cutting impact cushioning, mechanical depth stop, two-hand operation

Condition: used, Year of construction: 1987, pressure 65 t distance between columns 930 mm stroke 1100 mm distance table/ram, stroke up 1300 mm table surface area 1340x1084 mm hole in the table 604 x 404 mm table height over floor 1000 mm side window 705 mm ram surface 1230 x 990 mm speed down 620 mm/s speed up 207 mm/s working speed 320 mm/s oil volume 450 l power requirement 15,5 kW weight 8,0 t Dksdpsvuk Szofx Am Tsp dimensions (WxDxH) 2,8 x 2,6 x 4,85 m SPECIAL DEAL as is where is, NOT CHECKED WITHOUT putting into operation / WITHOUT additional work free loaded to truck

Condition: used, Year of construction: 2012, pressure 260 t Dkedpfx Amjvuuk Ie Tsp distance between columns 360/270 mm stroke 60 mm Stroke rate 50 / min Distance table/ram, max. stroke up, adjustment up 225 mm Table surface area 340 x 380 mm table height over floor 800 mm Ram surface 230 x 220 mm Ram adjustment 12 mm Power capacity 4,5 kW Dimensions (WxDxH) 2,0 x 1,55 x 2,6 m Weight 4,5 t overhaul in 2012: new clutch-brake combination new control Siemens S 7 new two-hand and foot operation

Condition: used, Year of construction: 2007, pressure 315 t distance between columns 1750 mm stroke 700 mm distance table/ram, max. stroke up, adjustment up 1200 mm table surface area 1600 x 1500 mm pressure of drawing cushion in table 125 t stroke of drawing cushion in table 200 mm die cushion area 1200 x 1400 mm table height over floor 750 mm ram surface 1640 x 1500 mm power requirement 55,0 + 11,0 kW weight 29,5 t dimensions (WxDxH) 3,2 x 4,5 x 5,8 m Dkjdpfx Ajvuukbjm Top Height above floor 5,1 m year of manufacture 1983 - 2007: modernization of electrical control (Siemens S 7) with oil-hydraulic drive, hydraulic drawing cushion in table, hydraulic cutting impact cushioning

Condition: used, Year of construction: 1989, pressure 100 t distance between columns 1060 mm stroke 700 mm distance table/ram, max. stroke up, adjustment up 1250 mm table surface area 1000 x 700 mm pressure of drawing cushion in table 40 t stroke of drawing cushion in table 200 mm die cushion area Ø 250 mm Dedevuk Naopfx Am Tskp table height over floor 950 mm side window 580 x 750 mm ram surface 1000 x 700 mm oil volume 700 l power requirement 47,0 kW weight 13,0 t Dimensions (WxDxH) 2,2 x 1,8 x 5,0 m with oil-hydraulic drive, controllable dependent on pressure/time and way, hydraulic drawing cushion in table, ejector in ram, mechanical depth stop (motoric adjustable), ram interlocking (SITEMA)

Condition: used, Year of construction: 1997, pressure 130 t distance between columns 1600 mm stroke 8 - 140 mm no. of strokes 50 - 200 Hub/min dayligth (stroke and adjustment up) 520 mm column travel -side 610 mm table surface area 1600 x 880 mm hole in the table 1000 x 350 mm Dkedevuugcspfx Am Tjp table height over floor 950 mm ram surface 1600 x 880 mm power requirement 24,2 kW weight of the machine ca. 28,00 t required space 4,3 x 2,2 x 3,8 m ram adjustment 100 mm with infinitely variable drive, hydraulic clutch/brake combination, hydraulic overload protection in ram, pneumatic counterbalance in ram, motoric ram adjustment, automatic stroke adjustment, electronic roll feed (Hensel, EVX 500) with hydraulic intermittent lifting 2025 - in progress: new electrical (safety) control - Siemens S7-1500 F, easy operation via touch-panel Video at seller's site before dismantling available

Condition: used, Year of construction: 1993, pressure 100 t throat 320 mm stroke 160 mm dayligth 480 mm Dkedjvuuflopfx Am Tsp table surface area 630 x 550 mm hole in the table 200 mm table height over floor 860 mm ram surface 560 x 450 mm oil volume 500 l total power requirement 30,5 kW weight of the machine ca. 6,4 t required space 1,6 x 2,0 x 2,9 m year of manufacture 1979 - overhaul 1993 with oil-hydraulic drive, controllable dependent on pressure/time and way, hydraulic cutting impact cushioning, mechanical depth stop, two-hand operation

Condition: used, Year of construction: 1980, pressure 100 t stroke 20 - 200 mm no. of strokes 20 - 60 /min distance between columns 1230 mm dayligth (stroke and adjustment up) 650 mm column travel -side 540 mm table surface area 1050 x 750 mm table height over floor 760 mm ram surface 1000 x 750 mm ram adjustment 100 mm power requirement 18,0 kW Djdpfxevuk H Ee Am Tekp Weight 20,5 t dimensions of the machine ca. 2,8 x 1,9 x 4,3 mxmxm permitted only for safe tools or fixed screen according to the German Safety Regulations (UVV) with infinitely variable drive (PIV), pneumatic hydraulic clutch/brake combination (Desch), hydraulic overload protection in ram, semi-automatic stroke adjustment, motoric ram adjustment, pneumatic counterbalance in ram, motoric circular oil lubrication, two-hand and foot operation as is where is, WITHOUT putting into operation

Condition: used, Year of construction: 2010, pressure 315 t distance between columns 1800 mm Dkodpfxevuubmj Am Tjp stroke 400 mm Distance table/ram, max. stroke up, adjustment up 650 mm table surface area 1800 x 1000 mm table height over floor 900 mm die cushion pressure in table 80 t die cushion stroke in table 100 mm Die cushion area in table 1300 x 600 mm side window 600 mm ram surface 1800 x 1000 mm speed down 400 mm/s speed up 300 mm/s working speed 15 - 80 mm/s oil volume 1700 l power requirement 55,0 kW weight 27,5 t dimensions (WxDxH) 3,1 x 2,2 x 4,6 m year of manufacture 1980 - modernization 2010 with oil-hydraulic drive, hydraulic drawing cushion in table No foundation pit necessary

Condition: used, Year of construction: 1977, pressure 250 t stroke 40 - 190 mm no. of strokes 40 /min throat 500 mm passage to the back 1050 mm dayligth 615 mm table surface area 1380 x 880 mm hole in the table 450 mm table height over floor 800 mm ram surface 1200 x 800 mm ram adjustment 125 mm power requirement 22,0 kW Weight 24,0 t dimensions of the machine ca. 2,0 x 2,5 x 3,95 m x m x m Djdpfsvuuaiex Am Tskp permitted for manual loading according to the German Safety Regulations (UVV) with motor, pneumatic clutch/brake combination, hydraulic overload protection in ram, pneumatic counterbalance in ram, motoric ram adjustment, manual stroke adjustment, motoric centralized lubrication, bolster plate, two-hand operation

Condition: used, Year of construction: 1991, pressure 63 t throat 325 mm stroke 560 mm dayligth 700 mm table surface area 640 x 640 mm Dedjvuuacepfx Am Tekp die cushion capacity 25 t die cushion stroke 200 mm die cushion area 450 x 450 mm table height over floor 800 mm ram surface 560 x 560 mm oil volume 450 l total power requirement 15,0 kW weight of the machine ca. 7,0 t required space 1,2 x 2,0 x 3,1 m year of manufacture 1971 - overhaul 1991 with oil-hydraulic drive, hydraulic drawing cushion in table, two-hand operation

Condition: used, Year of construction: 1990, pressure 500 t distance between columns 1220 mm stroke 600 mm distance table/ram, max. stroke up, adjustment up 1000 mm table surface area 1600 x 1200 mm pressure of drawing cushion in table 320 t stroke of drawing cushion in table 150 mm drawing cushion surface in table 750 x 625 mm pressure of drawing cushion in ram 180 t stroke of drawing cushion in ram 100 mm drawing cushion area in ram 750 x 625 mm ram surface 1600 x 1200 mm table height over floor 800 mm speed down 665 mm/s speed up 530 mm/s working speed 34 - 100 mm/s quantity of oil 2000 l power requirement 180,0 kW Dkodpfx Amovut Tbe Tep weight 40,0 t Dimensions (WxDxH) 3,2 x 2,4 x 7,5 m Depth of foundation pit 4,1 m Height above floor 5,55 m YOM 1975 - Overhaul 1990 with oil-hydraulic drive, hydraulic drawing cushion in table and ram

Condition: used, Year of construction: 1979, pressure 160 t distance between columns 1620 mm stroke 600 mm Distance table/ram, stroke up 800 mm table surface area 1600 x 1100 mm table height over floor 750 mm die cushion pressure in table 63 t die cushion stroke in table 180 mm Die cushion area in table 1300 x 750 mm side window 600 mm ram surface 1600 x 1100 mm Dsdpfx Asvut Ryem Tskp oil volume 1160 l power requirement 30,0 + 16,0 kW weight 23,6 t dimensions (WxDxH) 2,9 x 2,3 x 4,65 m Height above floor 4,26 m with oil-hydraulic drive, hydraulic drawing cushion in table No foundation pit necessary

Condition: used, Year of construction: 1989, pressure 250 t stroke 20 - 190 mm no. of strokes 24 / 48 /min Dksdpfxsvut Nce Am Tjp throat 500 mm passage to the back 1000 mm dayligth 615 mm table surface area 1400 x 880 mm hole in the table 450/500 mm table height over floor 800 mm ram surface 1380 x 620 mm ram adjustment 125 mm power requirement 29,0 kW Weight 27,0 t dimensions of the machine ca. 2,0 x 2,6 x 4,1 m x m x m permitted for manual loading according to the German Safety Regulations (UVV) with motor with 2 speeds, pneumatic clutch/brake combination, hydraulic overload protection in ram, pneumatic counterbalance in ram, motoric ram adjustment, semi-automatic stroke adjustment, motoric centralized lubrication, two-hand operation can be inspected in running function in our warehouse

Condition: used, Year of construction: 2004, pressure 63 t stroke 160 mm throat 280 mm dayligth 360 mm table surface area 560 x 490 mm table height over floor 860 mm ram surface 280 x 280 mm power requirement 22,0 kW Weight 3,6 t dimensions of the machine ca. 0,8 x 1,7 x 2,8 mxmxm hole in the table 125 mm yom 1980 - Modernization of control (Siemens S 7) in 2004 Dedpfxevut H Is Am Tskp with oil-hydraulic drive, controllable dependent on pressure/time and way, two-hand operation

Condition: used, Year of construction: 2023, machine/vehicle number: H300SV23-17, pressing force: 300 t, stroke length: 1,000 mm, table width: 1,000 mm, table length: 1,200 mm, overall weight: 21,000 kg, die cushion force: 130 t, die cushion stroke: 300 mm, Control and basic data • Control: SIEMENS PLC • Pressing force / capacity: 300 t • Motor power: 30 kW • Year of manufacture: 2023 • Serial number: H300SV23-17 Pressing area • Cylinder diameter: 380 mm • Stroke: 1000 mm • Tool dimensions (max.): 1400 × 1200 mm • Tool weight (max.): 5,000 kg Drawing cushion • Drawing cushion stroke: 300 mm • Drawing cushion force: 130 t Speeds • Feed speed: 160 mm/s • Return speed: 200 mm/s Hydraulics and connection values • Pump output: 103 l/min • Oil volume: 1100 l • Operating pressure: 243 bar • Operating voltage: 380 V • Frequency: 50 Hz • Max. current: 60 A Dedpfxezhlg Ao Am Tekp The machine is available immediately, has already been dismantled, and can be inspected.

Condition: used, Year of construction: 1990, pressure 160 t stroke 20 - 120 mm no. of strokes 30 - 180 /min distance between columns 1510 mm column travel -side 400 mm dayligth 820 mm table surface area 1430 x 900 mm hole in the table 1010 x 320 mm table height over floor 890 mm ram surface 1300 x 800 mm ram adjustment 100 mm material width 20 - 400 mm material thickness 0,3 - 5,0 mm feed length 1,0 - 9999,9 mm power requirement 52,0 kW weight of the machine ca. 29,0 t dimensions of the machine ca. 3,7 x 2,5 x 4,0 mxmxm Dkjdpeyx Ii Djfx Am Tjp with infinitely variable drive, back gears, pneumatic clutch/brake combination, hydraulic overload protection in ram, motoric ram adjustment, pneumatic counterbalance in ram, bolster plate, motoric centralized lubrication, electronic press force monitoring electronic roll feed Type KWV 400 ZDH 120 (YOM 2003), band-material oiler

Condition: new, Year of construction: 2026, functionality: fully functional, power: 7.5 kW (10.20 HP), input voltage: 400 V, input current: 30 A, input frequency: 50 Hz, type of input current: three-phase, pressing force: 100 t, stroke length: 200 mm, operating speed: 140 mm/s, reverse speed: 130 mm/s, table width: 60 mm, table length: 3,200 mm, table height: 850 mm, throat depth: 500 mm, ram plate width: 50 mm, ram plate length: 3,200 mm, distance table to ram: 460 mm, clearance between the columns: 2,700 mm, retraction force: 10 t, oil tank capacity: 230 l, total length: 3,800 mm, total width: 1,800 mm, total height: 2,750 mm, overall weight: 7,300 kg, Equipment: CE marking, documentation/manual, safety light barrier, This machine tool is designed and manufactured with the latest technology, ensuring its strength, rigidity and safety performance. It adopts an integral high-quality steel plate welded structure with a heavy-duty and high-rigidity frame. The machine surface is coated with imported anti-rust primer and topcoat, keeping the equipment in good condition permanently. The machine tool is mainly composed of the frame, upper slide, backgauge system, slide block and synchronous control device, dies, hydraulic system, control system and other components. Product detail display Frame Section It adopts a frame-type structure, consisting of worktable vertical plates, left and right side plates, and connecting beams. It is integrally welded with steel plates, featuring high rigidity, high strength and excellent resistance to torsional deformation. Internal stress is eliminated through processes such as surface shot blasting, ensuring long-term stability of the overall machine precision. During bending, the deformation of the upper slide and worktable is minimal, which guarantees excellent straightness and angular consistency of workpieces. Die and Clamping Device It is composed of upper and lower dies, featuring high precision, premium quality and long service life. The upper die is mounted on the slide block, securely fixed by a precision quick-release clamping device. The lower die adopts a dual-V concentric design, allowing for fast and convenient die changeover, effectively reducing operator labor intensity, and significantly improving overall production efficiency.device. The lower die adopts dual V concentric design, enabling fast and convenient die change, reducing intensity and improving efficiency. Throat Opening Deflection Compensation Device A linear encoder is installed on each side of the machine to measure and feed back the precise distance between the slide block and the lower worktable. The encoders are connected to the worktable via C-frames, effectively eliminating the influence of frame throat deformation on the slide block position. Position data is fed back to the CNC system, which outputs signals to control the hydraulic proportional servo valves, ensuring accurate synchronization of the two cylinders. Backgauge System Adopts the latest Belgian-designed backgauge for exceptional precision and stability. Driven by servo motors and ball screws, it delivers high speed and outstanding positioning accuracy. The unique dual linear guide rail structure ensures excellent long-term repeatability. Multi-stage positioning expands the working range, offering superior value for investment. Modular design allows axis configuration from single-axis X to multi-axis options. Mechanical Compensation Device Adopts an integrated mechanical compensation wedge block, motor-driven for precise adjustment. It automatically fine-tunes the worktable alignment, offsetting deflection caused by bending forces. The system ensures consistent precision along the entire length of the workpiece. It provides reliable, repeatable adjustment, eliminating the need for manual correction, and significantly improving bending accuracy. Dkodjy Uc Nkepfx Am Top

Condition: excellent (used), Year of construction: 2007, operating hours: 500 h, functionality: fully functional, machine/vehicle number: 1541, total width: 2,000 mm, total height: 2,500 mm, total length: 30,000 mm, briquette diameter: 90 mm, overall weight: 6,000 kg, Equipment: CE marking, type plate available, Complete production line for cylindrical briquettes, Ø 90 mm. The line includes a Di Più BRIK MB90 briquetting press, an input sawdust conveyor, a briquette cooling tower, a briquette cutter, a briquette sorting conveyor, a shrinking tunnel (packaging machine), and an output roller conveyor. Dksdpfoy U D Uusx Am Tsp

Condition: used, functionality: fully functional, On offer: ITALPRESSE Nuovo Program edge bending and bale press The machine is used, has undergone a technical inspection, is fully functional, and ready for operation. Before purchase, it can be started and thoroughly inspected at our company's premises. Specifications: • Manufacturer: ITALPRESSE • Model: Nuovo Program • Year of manufacture: 2004 Dedezivvwspfx Am Tokp • Maximum working dimensions: 3000 × 2000 mm • Minimum working dimensions: 250 × 340 mm • 2 hydraulic vertical cylinders • 2 hydraulic horizontal cylinders • Total clamping force: 9500 kg • Independent control of vertical and horizontal cylinders • Suspended control panel on an arm • Hydraulic unit power: 1.5 kW • Maximum hydraulic system pressure: 150 bar • Width of clamping beams: 100 mm • Power supply: 400 V / 50 Hz • The machine has CE marking • Weight: approximately 1200 kg • Overall dimensions: 340 × 95 × 260 cm (L × W × H, without control panel arm) Additional information: • Good technical condition • Machine preserved in its original condition • The photos show the actual condition of the offered machine • Free machine operation training at our company's premises • The price stated in the auction does not include VAT Financing and transport: • We arrange transport using the MDD fleet, courier companies, or external carriers • We assist in obtaining leasing or a leasing loan • Transport costs are determined individually

Condition: like new (used), Year of construction: 1985, machine/vehicle number: 38754, functionality: limited functionality, operating hours: 200 h, pressing force: 250 t, This plate bending machine was installed new in 1989 and was used for 200 Hrs and never used ever since. The mechanical parts are fully functional and are in perfect condition but the electrical board needs fixing. Dodpjykl Iasfx Am Tjkp Force: 250 mp (metric tons) Working Surface Length: 5600 mm Working Surface Width: 400 mm Working Surface Height: 100 mm Weight: Approximately 37,000 kg Press Sizes (LxHxW): 5700 x 3150 x 5200 mm

Condition: good (used), Year of construction: 2023, functionality: fully functional, operating hours: 59,000 h, input voltage: 400 V, input frequency: 60 Hz, type of input current: three-phase, workpiece height (max.): 50 mm, edge thickness (max.): 5 mm, actuation type: electric, total height: 2,000 mm, total length: 3,095 mm, total width: 1,330 mm, overall weight: 700 kg, Equipment: documentation/manual, 2023 Good condition For inquiries, please contact: Gergely Repka 06707739050 Professional edge banding machine suitable for edge sealing and post-processing of panel-format sheet materials. It can be used for particleboard, MDF, furniture board, table tops, etc. Key technical data: * Coil edge banding: 0.4–3 mm * Strip edge banding: 0.4–5 mm Dkodpfx Aozi Am Nem Tjp * Maximum edge height: 55 mm * Processable sheet thickness: 8–50 mm * Edge banding cross-section: max. 5 × 50 mm (material-dependent) * Minimum workpiece width: 70 mm * Minimum workpiece length: 180 / 210 mm * Feed speed: 9 m/min * Manually adjustable pressure beam * Extendable workpiece support with 500 mm distance Equipment: * Edge Control BC15 control system with a 15.6" touchscreen * Vi.se. (Visual Setting) digital setting system for quick and accurate machine adjustment * FG101 pre-milling unit with 2 diamond milling heads * MG101 edge feeding unit * Glu Jet GJ101 hybrid adhesive technology (2.3 kW / 50 Hz) with automatic adhesive height adjustment * 1.4 kg adhesive tank (for 4 cartridges) * Glu Jet cleaning tank * Automatic refilling system * DW101 pressing unit * KA101 pneumatic end trimming unit, 1 motor version * 0.22 kW * 12,000 rpm * FR101 profile smoothing unit * chamfering and radius function * 2 × 0.37 kW * 12,000 rpm * 2 replaceable HW milling heads Ø75, Z4, R2 * FF101 corner rounding unit with dual linear guide * ZK101 scraping unit R=2.0 mm * Chip collection system * FK101 surface scraper unit * SW101 polishing unit * 2 × 0.13 kW * 1,400 rpm * 2 textile polishing discs, 120 mm * Adjustable from 0–5° * TR101 spraying unit for infeed and outfeed sides

Condition: good (used), Year of construction: 2007, Like-new workshop press from Stenhoj Dodszi Sbijpfx Am Tokp Type: T40 Capacity: 40 tons Electric/hydraulic unit

Condition: good (used), Year of construction: 2007, Used 3-meter press brake from Baykal Dsdpfozi Rmqjx Am Tjkp Type: APH 3106 X 120 Capacity: 3100 x 120 tons NC control (basic) Lazersafe safety system for high speed 1 set of tooling Year of manufacture: 2007