Used Graphite for sale (158)

Condition: new, Year of construction: 2025, functionality: fully functional, overall weight: 151 kg, Vacuum Pump Becker VTLF 2.250 NEW! ON STOCK Price: 2,990 EUR + VAT The Becker VTLF 2.250 vacuum pump is an oil-free vacuum pump designed for continuous operation. It uses graphite composite vanes that require no lubrication. Only minimal maintenance is needed and no oil changes are required. TECHNICAL DATA: -Motor power: 5.5 kW -Operating voltage: 400V -Motor speed: 950 rpm -Vacuum: 200 mBAR -Noise level: 79 dBA -Weight: 280 kg ADVANTAGES OF THE VTLF 2.250 VACUUM PUMP: -100% dry operation -Compact design -Low operating and maintenance costs -Quiet operation – no need for silencer housing -Oil-free operation -Easy maintenance -Air cooling -Long service life of graphite vanes -Built-in internal filter -Complies with ISO standards and C.E. regulations Dlodpfx Adsvc D Ulodea

Condition: new, Year of construction: 2024, functionality: fully functional, machine/vehicle number: 4600-116144, overall weight: 890 kg, load capacity: 40 kg, arm reach: 2,550 mm, Equipment: documentation/manual, For sale: IRB 4600 industrial robot. The robot is brand new, unused, and has never been unpacked from its original packaging. Available immediately as it comes from a cancelled project. This is an excellent opportunity for companies seeking an efficient and reliable automation solution. Details can be found in the attached PDF. Key information: Robot type: Six-axis robot IRB 4600 Payload: 40 kg Reach: 2.55 m Condition: Brand new, unused, in original packaging Warranty: Covered by a 3-month warranty Availability: Immediate MANIPULATOR 435-86 Variant: IRB 4600-40/2.55 209-202 Manipulator colour: ABB Graphite White (standard) 287-4 Protection: Standard 334-1 Signs on manipulator: ABB branding 803-1 Media & Communication: Parallel & Air 431-1 Connector kits, upper arm: Upper arm 239-1 Connector kits, base: Base 1999-1 Standard calibration method: Axis calibration BASIC 700-3 Controller variants: Single cabinet 129-1 EC Machinery Directive: Prepared for CE and China 769-2 Mains voltage: 3x400V 752-1 Mains connection type: Cable gland Dedew Nqr Iopfx Addjla 742-1 Mains switch: Rotary switch 708-1 Room temperature: Max 45°C 741-1 Cabinet connector protection: Connector cover 438-1 Warranty: Standard warranty FLOOR CABLES 210-2 Manipulator cable – length: 7 m CONTROL MODULE 701-1 FlexPendant: FlexPendant 10 m 888-3 PROFINET IO: PROFINET IO slave software 731-1 Safety interface: Internal safety connection 733-1 Operator panel: Panel on cabinet 735-1 Operation mode selector: Three-position key switch ROBOTWARE 685-2 RobotWare Version: RW 6 608-1 World Zones: World Zones 611-1 Path Recovery: Path Recovery 613-1 Collision Detection: Collision Detection 617-1 FlexPendant Interface: FlexPendant Interface 623-1 Multitasking: Multitasking

Condition: good (used), Year of construction: 2004, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 500 mm, For sale is a 3-axis CNC machining center of the brand Ingersoll and type OPS 800. Ideal for the production of graphite electrodes thanks to the built-in high-speed spindle The machine is fully functional and ready for immediate use Technical data Year of construction: 2004 X-path: 800 mm Y-path: 700 mm Z-path: 500 mm Control: ANDRON Spindle speed: 42,000 min/-1 Tool changer: 36-fold Tool holder: HSK 63 incl. Graphite extraction: Chip trays Cooling system WKZ not included For sale is a 3-axis CNC machining center of the brand Ingersoll and type OPS 800. Ideal for the production of graphite electrodes thanks to the built-in high-speed spindle The machine is fully functional and ready for immediate use Dledpfxouu Rths Addja Technical data Year of construction: 2004 X-path: 800 mm Y-path: 700 mm Z-path: 500 mm Control: ANDRON Spindle speed: 42,000 min/-1 Tool changer: 36-fold Tool holder: HSK 63 incl. Graphite extraction: Chip trays Cooling system WKZ not included On request, transportation and loading can be organized for an extra charge. can be organized throughout Europe. Prices plus VAT Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website

Condition: refurbished (used), functionality: fully functional, travel distance X-axis: 475 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 400 mm, workpiece weight (max.): 200 kg, rotational speed (max.): 42,000 rpm, table diameter: 450 mm, 5-axis Röders Tec RXP800DS -completely overhauled- The machine is completely overhauled, checked and measured in our company. The machine again meets the new machine tolerance! Working area: - X-axis: 475 mm - Y-axis: 600 mm - Z-axis: 400 mm - Clearance height: 500 mm Tool changer: 52-way Spindle: HSK40E max. 42,000 rpm Tool measuring laser for tool measurement Handbox Minimal quantity lubrication Prepared for extraction system (e.g. for graphite) Spindle compensation Accuracy package Dljdpevvlmcofx Addea Control: Röders RMS6 in current version A viewing of the machine in operational condition is possible at any time. You are also welcome to find out more about the type and scope of our reconditioned machines on our website or on our Hüttmann YouTube channel.

Condition: good (used), Year of construction: 2015, Number of printing decks 8 Max. print width 820 mm Max. material width 850 mm Min. material width 300 mm Min. print length 260 mm if not specified otherwise for optional accessories Air core diameter 76.510 mm Repeat steel lock 310 mm Max. print length 600 mm OPERATION EFFICIENCY Max. mechanic speed 300 m/min FALCON - automatic setting of print registers and impressions Dljdpfx Aetuc R Heddoa Sophisticated system for print control FAST BLADE - system for doctor blade exchange in the machine INKSTORM - automatic wash-up system (option) Bosh Rexroth INDRAMAT direct drive technology JOB MANAGEMENT - preparation of future jobs from remote PC PRINT QUALITY CDTS - central drum thermal stabilization system DYNAMIC IMPRESSION - printing deck impression electronic compensation system Machine design with emphasis on high printing stability Composite graphite cores (option) EASY OPERATION Intuitive touch display (Touch Screen) Easy access to web path Doctor blade chambers with FAST BLADE system for blade quick exchange in the FASTBLADE machine FASTADAPT - doctor blade chamber position automatic adaptation CORONA, AHLBRANDT - 4 kW Side control before printing Printing unit 8-printing deck unit Central drum with diameter of 1,450 mm Gas dying system Printed material cooling unit Unit with cooling cylinder and servo drive Web guiding system prior to the rewind unit Web fault control system BST SUPER HANDY SCAN 4000 chip digital camera Rewind unit NONSTOP 800 rewind unit For roll max. diameter of 800 mm Roll clamping using pneumatic expansion shaft

Condition: new, Holzkraft LBSM LS 3000 long belt sander (5506030) With electric height adjustment in 2500 or 3000 mm length. Particularly heavy professional design. DESCRIPTION - Quick belt tensioning by lever - Upper belt support with graphite coating - 250 mm balanced belt rollers provide optimum drive. - With electric height adjustment - With suction and noise protection devices - With noise protection certificate Dlsdekzkyaopfx Addoa - With two speeds - Adapts to surfaces due to swiveling sanding shoe - Angled surfaces - With right and left rotation as standard - Quick belt tensioning allows quick and easy changing of sanding belts. - Supplied partially assembled TECHNICAL DATA Dimensions and weights length (product) approx.: 4540mm width/depth (product) approx.: 1510mm Height (product) approx.: 1510mm Weight (net) approx.: 475kg Connection suction Suction port diameter: 2 x 140mm Working table(s) max. working width on table: 900mm working table height adjustment: 620mm Electrical data Power suction motor: 0.75kW Power drive motor: 3.3 / 4.5kW Supply voltage: 400V Mains frequency: 50Hz Power height adjustment motor: 0.37kW Sanding unit grinding belt length: 8100mm grinding shoe length: 360mm grinding shoe width: 150mm grinding belt width: 150mm Belt speed(s): 9 / 18m/s Workpiece Height max. workpiece longer than worktable: 180mm Explanation to height max. workpiece longer than worktable: Machining of workpiece with overhang right over worktable possible. Workpiece height max.: 590mm Made in Italy Holzkraft dealer - accessories available on request!

Condition: new, Year of construction: 2024, functionality: fully functional, turning diameter: 51 mm, The machine is a new storage machine. STANDARD EQUIPMENT main spindle 15KW, 4.000 rpm with Mitsubishi M830 control with 4 cross slides on the main spindle with an 8-fold servo turret VDI30x55 all stations can be used for red. WZG central milling drive 3.3 KW, 3000 rpm incl. stable polygon turning function (without tool holder) with full C-axis on the left spindle and on the pick-up spindle with 48-position spindle lock for support during routing Including pick-up spindle with workpiece collecting tray and finished part conveyor belt for falling cut-off parts or remnants With swiveling finished part conveyor belt for finished part unloading after rear side processing 4 tool holders for rear side with programmable KM high pressure for clamping device cleaning before the next workpiece transfer with HD-KM pumps, 70 bar with separate coolant tank (180 liters) with handwheel Coolant and hydraulic pumps Bar feeder interface Interface for Lico chip conveyor 1 set of slide base holders Automatic lubrication system Cutting force monitoring at all stations Control cabinet with air conditioning unit 3-fold signal lamp The machine is also equipped with a turret for back machining. This is only designed for fixed tools. BASIC MACHINE EQUIPMENT LICO / FMB bar loader interface Programming pad for Lico machines Color Door RAL 7015 slate gray Chip tray/frame RAL 7024 graphite gray Dedpfjug Up Njx Addsla Housing RAL 7035 light gray

Condition: new, Year of construction: 2024, functionality: fully functional, machine/vehicle number: 460-102150, overall weight: 960 kg, load capacity: 110 kg, arm reach: 2,400 mm, warranty duration: 6 months, Equipment: documentation/manual, For sale: brand new industrial palletizing robot. The robot is factory-new, unused, and has never been removed from its original packaging. Available immediately as it comes from an unrealized project. This is an excellent opportunity for companies seeking an efficient and reliable automation solution for their processes. Warranty: Covered by the full manufacturer’s warranty until the end of 2025. Availability: Immediate Note: The main photo is for illustration purposes. We are selling a robot packed on a pallet in its original packaging, see subsequent photos. Equipment includes: MANIPULATOR 435-107 Variant: IRB 460-110/2.4 209-202 Manipulator colour: ABB Graphite White std 287-4 Protection: Standard 803-1 Media & Communication: Parallel & Air 431-1 Connector kits Upper arm: Upper arm 239-1 Connector kits On foot: On foot 1999-1 Standard calibration method: Axis Calibration BASIC 700-3 Controller variants: Single cabinet 129-1 EC Machinery Directive: Prepared for CE and China 769-2 Mains voltage: 3x400V 752-2 Mains connection type: 6HSB 6p+PE 742-1 Mains switch: Rotary switch 708-1 Room temperature: Max 45°C 741-1 Cabinet connector protection: Connector cover 438-1 Warranty: Standard Warranty FLOOR CABLES 210-2 Manipulator cable – Length: 7 m CONTROL MODULE 701-1 FlexPendant: FlexPendant 10 m 888-3 PROFINET IO: PROFINET IO slave SW 731-1 Safety interface: Safety internal connection 733-1 Operator panel: Panel on cabinet 735-1 Operating mode selector: Key switch, 3 modes ROBOTWARE 685-2 RobotWare Version: RW 6 Dledpfx Adsw Nn Imsdja 608-1 World Zones: World Zones 611-1 Path Recovery: Path Recovery 613-1 Collision Detection: Collision Detection 617-1 FlexPendant Interface: FlexPendant Interface 623-1 Multitasking: Multitasking 824-1 MultiFunction: MultiFunction

Condition: good (used), For sale is a Deckel FP2 with high-speed milling head (V-belt drive with gear ratio) The machine was only used for copper & graphite processing, so it is not subjected to heavy use The machine is ready for use and fully functional Dsdpfolz R Iwox Addsla A digital display can be retrofitted for an additional charge. The machine can also be sold without a milling head. Partial device NOT included Accessories available for an additional charge Tool holder: SK 40 Travel paths X/Y/Z: 400 / 200 / 400 mm Speed range: 40 - 2000 rpm Vertical spindle travel: 60 mm Horizontal spindle travel: 100 mm Feed rates: 8 - 400 mm/rev Table size: 700 x 330 mm Motor power: 2.2 kW Connection: 400 V / 16 A plug Weight: approx. 1300 kg All prices plus VAT Machine purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For more information or contact options, visit us on our website

Condition: new, -Continuously adjustable sanding unit (0 - 90°) for vertical and horizontal sanding -Oscillating sanding belt for better sanding results and a longer service life of the sanding belt -Quick and easy sanding belt change via quick-clamping system -Grinding sole with graphite coating as standard for a longer service life of the sanding belt -Work table made of gray cast iron adjustable via handwheel with T-slot -Including side sanding sleeve device for sanding curves and radii -Two suction nozzles Ø 100 mm -1x sanding belt 2750x 150mm grain 80 -1x sanding sleeve Ø38mm grain 80 -1x sanding sleeve Ø50mm grain 80 -1x sanding sleeve Ø75mm grain 80 Dimensions and weights: - Length (product) approx.: 1515 mm - Width/depth (product) approx.: 550 mm - Height (product) approx.: 1150 mm - Weight (net) approx.: 207 kg Extraction connection: - Extraction nozzle diameter: 100 mm Work table(s): - Work table length: 900 mm - Work table width: 305 mm - Work table height adjustment: 120 mm Electrical data: - Connection voltage: 400 V - Mains frequency: 50 Hz Grinding unit: - Sanding belt length: 2750 mm - Sanding belt width: 150 mm - Belt rotation speed(s): 16 m/s - Oscillation stroke: 15 mm - Sanding surface length: 1010 mm - Sanding surface width: 190 mm - Sanding height max.: 170 mm Dedpfx Asvxkv Usddsla - Sanding unit swivel: 0 – 90 ° Workpiece: - Workpiece width max.: 1010 mm - Workpiece height max.: 150 mm - new exhibition machine -

Year of construction: 2024, condition: new, The roller crusher RC 300 is ideal for crushing medium-hard, brittle, hard materials such as coal, ores, slag, minerals, graphite, bitumen and many more. Dlsdpfxsiamttj Addsa

Condition: excellent (used), Band sawmill consisting of: - Tension carriage EWD EW 1000 - Band saw EWD EBB 1400 - Roller conveyor for transporting the sawn goods (manufacturer SPRINGER) - Raised cabin - Tracks - Control cabinets - Accessories Optionally with complete sharpening room equipment: - Sharpening machine Vollmer CAL 200 - Upsetting machine Vollmer PMH - Flanking (leveling) machine Vollmer EMS Log band saw EWD Esterer EBB1400 Vertical band saw for round wood Roll diameter: 1400 mm Roll width: 200 mm Saw blade width: 206 mm Saw blade thickness max. 1.47 mm Blade speed max. 55 m/s (winter & summer drive pulley available) Main motor: 55 kW The roller crowning was reground in 2009 Band saw carriage EWD Esterer EW1000 hydraulic tensioning carriage Year of manufacture 1991 4 tensioning blocks Dljdpfx Adovtwzmodja with 3 log turners tensioning block opening max. 1000 mm hook opening max. 930 mm total length: 6000 mm total width: 2450 mm total height: 1750 mm track width 1300 mm The band sawmill was bought second-hand in 2004/2005, reinstalled by Esterer, but never put into full operation as cutting is almost exclusively done with the gang saw. The band saw has only run for 500 operating hours since 2004! very good condition - available immediately - can be demonstrated by appointment Sharpening room equipment: 01. Vollmer CAL 200 sharpening machine Year of manufacture 2000 Tooth feed from the left CNC machine for grinding cutting and block band saw blades with straight grinding and wet grinding Full enclosure with extraction for CBN and corundum grinding wheels Incl. 2 Borazon grinding wheels 10mm 02. Vollmer PMH upsetting machine Saw upsetting machine for band saw blades Max. blade thickness 3.5 mm 03. Vollmer EMS flank/leveling machine Leveling machine for upset band saw blades converted to self-drive in combination with CAL 200 incl. limit switch on the saw clamping! Further details: The sharpening machines were purchased second-hand in 2007 and stored covered on pallets or wooden structures in a dry, heated garage. Because the band saw was never put into full operation, the sharpening room equipment was repeatedly postponed, so that today the machines are in the same condition as when they were delivered. All operating instructions, descriptions and circuit diagrams are neatly enclosed in a box. In 2018 and 2023 the machines were cleaned of surface dust outside, lightly oiled with graphite spray and stored in the garage again! immediately available - fully functional - very good condition Location: Austria, near St. Pölten

Condition: refurbished (used), Year of construction: 1998, functionality: fully functional, measuring range Y-axis: 615 mm, table width: 1,200 mm, table length: 800 mm, Height gauge TESA Micro-Hite M-600 Range: 0 to 615mm Graphite table C.E.Johansson DIABASE (Made in Sweden) - Year: 1988 - Measurements: 1200x800 - Grade: B - Tolerance: 22 um Sale of the set. Dlsdpfx Aeqy H A Deddoa

Condition: used, Year of construction: 2021, functionality: fully functional, total height: 7,000 mm, total width: 4,750 mm, total length: 6,000 mm, pressing force: 1,000 t, reverse speed: 60 mm/s, The MV-1000E/NC-SINCRO hydraulic press is custom-designed for the adjustment of progressive dies. It features a tilting upper table and a movable lower table made of C45E steel, machined with DIN-650 T-slots to ensure minimal friction in the vertical movement of the upper table. This is achieved through the installation of maintenance-free bimetallic bushings and perfect parallelism ensured by four high-mechanical-resistance cylindrical columns of 300 mm in diameter, chrome-plated and rectified. STRUCTURE AND TABLES • Features a structure made from oxy-cut steel divided into three electro-welded monoblocks, exclusively manufactured from S355JR steel. • Stabilized and machined at the end of the welding process to ensure perfect parallelism and precision. • Calculated and designed with finite element software. • Cylindrical columns with a diameter of 300 mm, high mechanical resistance, rectified, and chrome-plated to maintain a low friction and wear coefficient. • Upper table with T-slots and anti-fall safety system. • Useful table surface: 4,750 x 2,250 mm. • Structure designed to support 600 TN of concentrated force on 1/3 of its surface. • Lower table designed to support up to 50 TN in displacement, supported by bronze guides with graphite load and mechanical positioning centers for precise table positioning. CYLINDER AND HYDRAULIC GROUP • 6 single-acting cylinders with lapped sleeves, chrome-plated pistons, and anti-wear guides. • Four 50 TN hydraulic compensators located at the ends of the lower table. • 800-liter hydraulic group with a silent Denison pump, automatic disconnection of the fast approach pre-filling speed, and equipped with a decompression system in working speed. • Proportional pressure system and optical gauges for displacement control on the upper table, with a synchro-electronic system for compensating off-center or unbalanced forces. • Hydraulic group cooling system with an independent air-oil radiator unit. • All M series hydraulic presses include a lateral pressure switch to adjust the most suitable pressure setting for each type of work. • Glycerin manometer with tonnage reading. ELECTRICAL INSTALLATION AND SAFETY • Includes a SIEMENS safety PLC model SIMATIC S7 1200 and a 12” touchscreen. Allows programming of semi-automatic and automatic operating modes, power, travel, and upper table dwell time. Capable of storing 300 recipes, with each recipe able to program all the above values. • Low voltage operation via two-hand pushbutton. • Anti-fall safety system with hydraulic safety jaws. • Level IV photoelectric barriers installed at the front and rear. • Lateral protections with opening and safety microswitches. TECHNICAL SPECIFICATIONS Power tn 125 - 1000 Opening Force tn 100 Powered Speeds 1 Engine Power kW 75 Fast Pre-Fill Speed mm/s 100 Variable Working Speed mm/s 12-4 Return Speed mm/s 60 Guide Diameter mm 300 Maximum Pressure Bar 290 Useful Table Area mm 4.750 x 2.200 Lower Table Displacement mm 2.200 Dlsdpjwpgwnsfx Addea Vertical Travel of Upper Table mm 800 Between Columns mm 5.000 x 1.490 Total Front mm 6.000 Total Side mm 4.750 Total Height mm 7.000 Weight kg 150.000

Year of construction: 2023, condition: new, functionality: fully functional, machine/vehicle number: ARI Armaturen 35.405 DN200 PN40 with AUMAnorm type SA14.2 F14, Motorised valve, valve body with actuator ARI Armaturen 35.405 DN200 PN40 with AUMAnorm type SA14.2 F14 Frequency: 50 Hz Rated power motor(s) (electric): 0.45 kW KVS value: 725.0 m³/h Material designation: 1.0619 GP240GH/GS-C25 (GS-C25N) Manufacturer information text: Specified limit switch type for shut-off: ‘Tandem torque and limit switch’ Pressure: PN40 Dodpevphq Rsfx Addela Cone: Standard Flange: geb.PN40 Spiabdi: Graphite E-voltage: 400V Current type: D

Condition: new, IRB 2600ID-15/1.85 New Warranty until February 2, 2025 Sale option Description Value 57-1 Cabinet colour ABB standard 129-1 EC Machinery Directive Yes 200-1 Kortplatser Qty = 0 209-202 Manipulator colour ABB Graphite White std Dlsdotdfg Sjpfx Addsa 210-2 Manipulator cable - Length 7m 283-28 Product IRB 2600 Bm908dqrln7 287-4 Protection Standard 334-1 Signs on manipulator ABB 435-103 Variant IRB 2600ID-15/1.85 438-8 Warranty Stock warranty 447-10 Yearmodel M2004 448-2 Delivery project SE Standard 545-1 System test Yes 608-1 World Zones Yes 611-1 Path Recovery Yes 612-1 Path Offset Yes 613-1 Collision Detection Yes 616-1 PC Interface Yes 617-1 Flexpendant Interface Yes 623-1 Multitasking Yes 632-1 Service Info System Yes 633-4 RW Arc Arc 6 685-2 Robotware Version RW 6 686-2 Motors ABB 698-1 Cabinet parts Yes 699-1 Manipulator Yes 700-3 Controller variants Single cabinet 701-1 FlexPendant FlexPendant 10 m 708-1 Room temperature Max 45 C 727-3 24V 24V 4Amps 731-2 Safety interface Safety external conn. 733-1 Operator´s panel Panel on cabinet 735-2 Operating mode selector Key switch, 2 modes 741-1 Cabinet connector protection Connector cover 742-1 Mains switch Rotary switch 751-3 Drive system 144A 262V 752-2 Mains connection type 6HSB 6p+PE 769-2 Mains voltage 3x400V 772-2 External axes Yes/No External axes No 800-2 Release variant Design 2006 824-1 MultiFunction Yes 888-2 PROFINET IO PROFINET IO m/s SW 943-1 Flexible conduit Yes 1089-1 Delivering Plant Robot prod, SE 1541-1 Base Dig. 16In/16Out Qty = 1 1999-1 Standard calibration method Axis Calibration Internal. PCI card Qty = 0 Internal. Kortplatser M2004 Qty = 16 Internal. sales organization 0501 Internal. Res 12 mm Camera lens Qty = 0 Internal. Max integrated vision lenses Qty = 3 Internal. Available Ethernet ports 0 Internal. Sum of Ethernet options 2 Internal. customer group 4 37 We service robots, refurbish robots, sell spare parts, repair spare parts.

Year of construction: 2024, condition: new, The rolls cruhser RC 200 is ideally suited for crushing medium-hard, brittle, hard samples like coal, ore, slage, minerals, graphite and many more. Max. feed size* Dedof Ulycepfx Addola

Condition: used, Year of construction: 2024, Neue Ausstellungsmaschine! Listenpreis 4.938€ netto Dljdpfx Adjryy N Sjdja Die robuste Junior R1 bietet sämtliche Eigenschaften, die eine moderne Kantenschleifmaschine mitbringen muss. Ein massives Graugussschleifaggregat mit einem leistungsstarken Motor sorgt für höchste Schleifleistung. Der durch Federdruck in der Höhe verstellbare Arbeitstisch lässt eine optimale Bandausnutzung und ein sicheres Arbeiten zu. Das Oberteil in schwerer Gussausführung mit eingebautem Drehstrommotor 380 V, 2,2kW, 2850 U/min; die Maschine ist ausgestattet mit eingebauter Schalter-Stecker-Kombination; Motorschutzschalter und Hauptschalter nach VDE; Maße der Schleifbandrückwand: 850 x 150 mm; Stahltisch in der Höhe durch Federdruck verstellbar; Bandmaß: 150 x 2280 mm; die Schleifbandrückwand ist beklebt mit einem Graphit-Gleitbelag. Die Maschine ist bei einem Anschluss an eine zentrale Absauganlage mit einer Luftgeschwindigkeit von min. 20 m/s staubgeprüft (GS) Inkl. Winkel und Gehrungsanschlag. Technische Daten: • Motorleistung: 2,2 kW • Schleifbandmaß: 150 × 2280 mm • Schleifbandgeschw.: 22 m/sec. • Tischgröße: 750 × 350 mm • Platzbedarf: 1000 × 800 mm • Gewicht: ca. 180 kg • Absaug- Ø: 100 mm

Condition: new, maximum load weight: 32,900 kg, overall weight: 39,000 kg, axle configuration: 3 axles, loading space length: 10,160 mm, loading space width: 2,200 mm, loading space height: 2,460 mm, loading space volume: 55 m³, Year of construction: 2025, Equipment: ABS, New Vehicle – Immediately Available! For sale, rental, or lease with purchase option by arrangement! Approx. 55 m³ Granalu aluminium tipping semi-trailer / combination tailgate / new vehicle / also available for rental! --- * Manufacturer: Granalu * Model: AERO – Grain Tipping Trailer * First registration: - (New vehicle) * Gross weight: 39,000 kg * Unladen weight (manufacturer spec.): 6,100 kg * Payload: 32,900 kg * Axles: 3x Jost axles with first axle lift / off-road starting aid / disc brakes * Suspension: Air suspension with raise and lower function * Tyres: 385/65 R22.5 * Colour: Tipper body & tarpaulin RAL 7001 silver grey, chassis RAL 7016 anthracite/graphite grey * EBS: Wabco * Combination tailgate (swing & pendulum gates) with 2x grain discharge chutes * 1x rotary bar lock per swing door * Additional locks on the sides and below the rear wall * Front wall sloped, 5 mm aluminium * Side walls: 6 mm aluminium, tapering to 3 mm towards top rail * Floor: 6 mm aluminium * Aluminium chassis * Aluminium landing legs * Hyva tipping cylinder (max. 250 bar), high and low pressure * Fifth wheel height: 1,200 mm (unladen) * Sliding tarpaulin with central locking * 4 crossmembers (3 pivotable) * Operator platform at front with access on the left * Internal front left access ladder * Tarpaulin hooks * Automatic lowering when tipping * Water tank * Toolbox * Aluminium ladder * Wheel chocks * Shovel and broom holder Dsdpfx Adew I I H Hjdsla * Acoustic reverse warning system * 2x LED reversing lights * 5-chamber LED rear lights * Foldable underrun protection * Single mudguards New Vehicle – Immediately Available! For sale, rental, or lease with purchase option by arrangement! Notice regarding potential errors in this advertisement: Despite careful preparation, there may be occasional errors in the text or information provided. We accept no liability for mistakes, changes, or prior sale. All information provided without guarantee. Please contact us to confirm details or clarify any further questions.

Condition: new, total length: 1,700 mm, total width: 1,000 mm, total height: 1,500 mm, table length: 900 mm, table width: 360 mm, input voltage: 400 V, grinding belt length: 2,580 mm, grinding belt width: 150 mm, power: 2.2 kW (2.99 HP), grinding belt speed: 14 mm/s, input frequency: 50 Hz, • Sanding unit can be swiveled using a handwheel • The welded steel machine base guarantees high torsional rigidity and vibration-free operation • Oscillating sanding belt with separate gear motor for better sanding results • Oscillation can be optionally activated • Sanding sole with graphite coating for a longer sanding belt service life • Height-adjustable sanding table utilizes the entire sanding belt width • Additional table with extraction openings for sanding radii on the rubberized guide roller • Sanding sleeve device with attachable work table • The spring-loaded belt tension automatically compensates for belt length differences Technical specifications: Dimensions and weights - Length (product) approx. 1700 mm - Width/depth (product) approx. 1000 mm - Height (product) approx. 1150 mm - Weight (net) approx. 250 kg Extraction connection: - Number of extraction nozzles: 2 - Extractor nozzle diameter 100mm Worktable: - Worktable length 900mm - Worktable width 360mm - Worktable height adjustment 110mm Electrical data: - Supply voltage 400V - Mains frequency 50Hz - Oscillation motor power - Sanding unit power 0.11kW - Sanding belt length 2580mm - Sanding belt width 150mm - Belt rotation speed(s) 14m/s - Oscillation stroke 15mm - Sanding surface length 800mm - Sanding surface width 150mm - Sanding height max. 150mm - Sanding unit pivoting 0 – 90° Scope of delivery • 1x Sanding belt K100 • 5x Rubber rollers Ø25, Ø30, Ø40, Ø45, Ø50 mm • 6x Sanding sleeves K80 - Ø25, Ø30, Ø35, Ø40, Ø45, Ø50 mm • Onboard tool kit Dljdpfx Aewg Dy Ijddea • Miter gauge If you have any questions, please contact us! Are you looking for a specialist dealer near you? We supply machine dealers throughout Germany, in European and non-European countries with metalworking machines, compressed air technology, woodworking machines, welding technology, as well as cleaning and workshop equipment. Contact us and we will tell you the nearest dealer.

Condition: new, Year of construction: 2025, All-round sheet fiber laser metal cutting machine Equipped with automatic functions of nozzle changing and one-click processing, P-Series is competent for all cutting demands. Flake graphite in the cutting machine bed improves greatly the shock absorption and wear resistance, and residual stress almost disappears after age hardening, therefore, precision and lifetime of the equipment are improved, and costs saved. The special fiber laser nozzle and cutting process ensure faster carbon steel oxygen cutting, more gas-saving low-pressure stainless steel nitrogen cutting, and better-quality carbon steel air cutting. Dlodpfoh S H R Sox Addsa Fiber laser heads are able to detect jutting obstacles to effectively reduce the damage rate and save the maintenance cost of a laser cutter. The fully closed-loop control adjusts according to feedback to ensure that the actual motion position is consistent with the theoretical input value. With One-click Processing, one laser cutter is able to process multiple sheets in batches with a one-off setup, achieving batch processing. Condition: New Laser Type: Fiber Laser Laser Power: 1500W - 30000W Cutting Area: 3048*1524mm - 6100*2500mm Cutting Speed: 0-169m/min Positioning accuracy: ±0.03mm - ±0.05mm Repositioning accuracy: ±0.02mm - ±0.03mm Graphic Format Supported: AI, BMP, Dst, Dwg, DXF, DXP, LAS, PLT CNC or Not: Yes Cooling Mode: WATER COOLING

Year of construction: 2024, condition: new, The rolls crusher RC 100 is ideal for crushing medium-hard, brittle, hard materials such as coal, ores, slag, minerals, graphite, bitumen and many more. Dledpfx Adsiamtajdoa

Condition: new, functionality: fully functional, table length: 950 mm, table width: 450 mm, input voltage: 400 V, oscillation stroke: 15 mm, grinding belt length: 2,640 mm, grinding belt width: 150 mm, power: 2.2 kW (2.99 HP), grinding belt speed: 14 mm/s, input frequency: 50 Hz, Sanding unit can be pivoted using a hand crank. The welded steel machine stand guarantees high torsional rigidity and vibration-free operation. Oscillating sanding belt with separate gear motor for better sanding results. Oscillation can be optionally activated. Sanding base with graphite coating for a longer sanding belt service life. Height-adjustable sanding table utilizes the entire sanding belt width. Additional table with extraction openings for sanding radii on the rubberized guide roller. Sanding sleeve device with attachable work table. The spring-loaded belt tension automatically compensates for belt length differences. With adjustable stops, it is ideal for veneer sanding. Dimensions and Weights Dodpfxewg Ddae Addela Length (product) approx. 1700 mm Width/Depth (product) approx. 1000 mm Height (product) approx. 1150 mm Net Weight approx. 300 kg Extraction Connection Number of Extraction Outlets 2 Extraction nozzle diameter 100mm Worktable(s) Worktable length 950mm Worktable width 450mm Worktable height adjustment 110mm Electrical Data Supply voltage 400V Mains frequency 50Hz Oscillation motor power 0.11kW Sanding unit: Sanding belt length 2640mm Sanding belt width 150mm Belt speed(s) 14m/s Oscillation stroke 15mm Sanding surface length 800mm Sanding surface width 150mm Sanding unit tilt 0-45° If you have any questions, please contact us! Are you looking for a specialist dealer near you? We supply specialist machine dealers throughout Germany, in European and non-European countries with metalworking machines, compressed air technology, woodworking machines, welding technology, as well as cleaning and workshop technology. Contact us and we will tell you the nearest dealer.

Condition: new, Year of construction: 2025, All-round sheet fiber laser metal cutting machine Equipped with automatic functions of nozzle changing and one-click processing, P-Series is competent for all cutting demands. Flake graphite in the cutting machine bed improves greatly the shock absorption and wear resistance, and residual stress almost disappears after age hardening, therefore, precision and lifetime of the equipment are improved, and costs saved. The special fiber laser nozzle and cutting process ensure faster carbon steel oxygen cutting, more gas-saving low-pressure stainless steel nitrogen cutting, and better-quality carbon steel air cutting. Fiber laser heads are able to detect jutting obstacles to effectively reduce the damage rate and save the maintenance cost of a laser cutter. The fully closed-loop control adjusts according to feedback to ensure that the actual motion position is consistent with the theoretical input value. With One-click Processing, one laser cutter is able to process multiple sheets in batches with a one-off setup, achieving batch processing. Dedpfx Ajhv U Tqjddola Condition: New Laser Type: Fiber Laser Laser Power: 1500W - 30000W Cutting Area: 3048*1524mm - 6100*2500mm Cutting Speed: 0-169m/min Positioning accuracy: ±0.03mm - ±0.05mm Repositioning accuracy: ±0.02mm - ±0.03mm Graphic Format Supported: AI, BMP, Dst, Dwg, DXF, DXP, LAS, PLT CNC or Not: Yes Cooling Mode: WATER COOLING

Condition: new, functionality: fully functional, working width: 1,100 mm, grinding width: 1,100 mm, grinding height: 170 mm, power: 15 kW (20.39 HP), height adjustment type: electric, grinding belt length: 1,900 mm, grinding belt width: 115 mm, CASADEI LIBRA 35/2 RTC 110 Standard Equipment Two-belt version with 1100 mm sanding width for the cost-conscious tradesman. The LIBRA 35 calibration and fine grinding machine is an extremely versatile and versatile machine. Robust tubular-reinforced monoblock steel machine body with high-mounted working units for maximum rigidity. User-friendly thanks to the clearly laid-out control panel on the front. Motorized table height adjustment. Digital display for the working height. Electronically controlled sanding belt oscillation with reduced compressed air consumption. 1st unit: 120 mm diameter, slanted steel roller with fine adjustment for calibration. Pneumatic on/off of the roller. 2nd unit: Combination unit with finely adjustable working height for calibration and fine grinding: 120 mm diameter rubber-coated roller (45 Sh), hard sanding pad with graphite coating on a replaceable insert. Pneumatic roller on/off Electronic sanding pad, 56-sector spacing Electronic control system FOX 500 KTR Electronic working thickness adjustment Automatic carpet centering ✔ Automatic star-delta start-up for main motor Natural rubber feed carpet with negative profile Support table with two rollers at the inlet and outlet of the feed carpet Carpet feed via gear motor with two speeds Flexible steel pressure rail in front of the first unit Rubber pressure rollers in front of and behind each working unit Pneumatic belt tensioning for each unit with decimal adjustment of grit/belt thickness Length approx. 1650 mm Width/Depth approx. 1820 mm Height approx. 1960 mm Dljdpswa Dbxjfx Addoa Extraction connection Number of extraction nozzles: 2 Extraction nozzle diameter: 140 mm Electrical data Height adjustment motor power: 0.25 kW Feed motor power 0.33/0.55 kW Drive motor power 15 kW Connection voltage 400 V Line frequency 50 Hz Grinding unit Grinding belt length 1900 mm Grinding belt width 1115 mm Maximum sanding width 1100 mm Feed unit Feed speed 4.5 / 9 m/min Workpiece Min. height 4 mm Max. height 170 mm #### For many years, we have maintained a partnership-based sales concept with specialist dealers, which is why orders are processed through a recommended partner coordinated with you.#####