Used Gratings for sale (365)

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, total width: 4,000 mm, total height: 3,500 mm, total length: 6,000 mm, Blasting System: Blasting chamber 6 x 4 x 3.5 m (LxWxH), steel construction with ISO panels Folding door at the front, emergency exit door on the side Interior wall lining with 4mm rubber sheets LED linear luminaires Full flat-floor conveyor with grating cover Cross feed screw conveyor Moveable blasting trolley on rail track Abrasive recovery system with bucket elevator, cleaner, and silo Pressure blasting fan Filter unit 7,500 m³/h Complete electrical control system Djdpsxxrwcsfx Addjcr Combined Painting and Drying System: Room size 6 x 4 x 4 m (LxWxH) Extraction wall 6 x 1 m (LxH) Partial surface filter ceiling Indirect gas heating LED lighting Year-round heat recovery Supply and exhaust air fans, each 14,000 m³/h

Year of construction: 2012, condition: used, Technical details: max. temperature: 700° - übliche Temperatur: 400 - 650°C Grad size of opening: B: ca. 2200 x T: ca. 3800 x H: ca.1100 mm program control: Siemens S7/300 IM 151-7 interface: Ethernet container volume: Ofen-Volumen: 9,2 m³ l control voltage: 24 / 230 Volt current type: 1P/PEN; 50 Hz Dcedpju R Dhxsfx Addor Voltage: 400 V elect. connected power requirement of heater: 3 x 3 x 21 kW = 189 kW flow rate: 3 x ca. 9.000 = 27.000 m³/h weight of the machine ca.: 8,0 t dimensions of the machine approx. HxWxD: ca. 3.9 x 3.8x 4.8 m dimensions electric cabinet: ca. B: 2.400 x T: 400 x H: 2.000 mm transport dimensions LxWxH: ca. 5,2 x 3,6 x 2,9 m Electrically heated circulation oven Electric annealing furnace whose housing is made of profiled sheet steel and lined with lightweight refractory bricks/ firebricks. Application/processes: mainly annealing of low-alloy and high-alloy wood cylinders (e.g. alloyed gray cast iron) Usual operating weight 5000kg max. 8000kg The parts are placed directly crosswise on the bogie hearth/grate in the flow device. (Height above floor approx. 750mm without grate) Heating integrated in oven ceiling Circulation fan (3 compact fans) on oven side wall, 3 x 4.0 kW = 12.0 kW Forced cooling (1 cooling air fan) Program control via 25 programs with 50 program sections per program Oven door/lifting door with SWE gear motor approx. 2.2 kW (frequency-controlled) Bogie hearth drive approx. 3.0 kW SEW geared motor (frequency-controlled) incl. center rail (chain drag) used, good condition *

Condition: used, empty load weight: 5,960 kg, maximum load weight: 30,040 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 12/2020, loading space length: 7,350 mm, loading space width: 2,550 mm, loading space height: 1,470 mm, loading space volume: 24 m³, color: silver, gearing type: other, driver cabin: other, Equipment: ABS, cabin, compressed air brake, * German semi-trailer * 1st owner * Condition as shown in photos * Body: Tipper body, Schwarzmüller SK * 24m³ Hardox steel trough body * Tipping angle approx. 45 degrees Dcjdpexxbp Usfx Addsr * Dimensions: Length 7,350 mm x Width 2,550 mm x Height 1,470 mm * Steel standing platform with aluminum safety grating, protective railing, and access ladder, mounted to chassis frame * Manual roll tarp * SAF axles * Air suspension with automatic lowering function via inductive switch and lowering lock via rotary switch on the semi-trailer * Front axle automatically liftable – raises and lowers depending on load and includes forced lowering with integrated speed-limited start assist * Disc brakes * 2 steel landing legs * EBS – electronic braking system * RSS – roll stability system * ABS * GVW 36,000 kg / technically permitted 39,000 kg * Unladen weight 5,960 kg * Payload 30,040 kg / technically permitted up to 33,040 kg If a new TÜV inspection is required, we would be happy to provide an offer from our partner workshops. Our offer is generally WITHOUT new TÜV inspection, without new DGUV certification, without new SP inspection, and without new UVV certification. You will find other trucks on our website at We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend viewing and inspecting the goods to avoid any misconceptions regarding condition and suitability. Viewings and inspections are possible and expressly desired at any time by appointment. All information is without guarantee. No liability is accepted for errors or incorrect information in the offer. The buyer is obliged to independently verify the condition and specifications of the goods/vehicles. Subject to changes, prior sale, and errors.

Condition: good (used), Year of construction: 2018, functionality: fully functional, Wood chip heating system with moving grate combustion, with flue gas dedusting, with Glosfume fine dust filter system. Boiler size: 257 cm long, 151 cm wide, 293 cm high. Weight: 7 tons. Dismantling must be performed by the buyer. Djdpjxciidjfx Addecr

Condition: new, functionality: fully functional, Year of construction: 2025, CONSTMACH vibrating feeder bunkers are high-efficiency equipment designed to ensure continuous and balanced feeding of crushers in stone crushing and screening plants. These bunkers are placed in front of primary impact crushers or jaw crushers to ensure a homogeneous flow of material. This increases the capacity of the crushers, balances the loads on the intermediate crushers, and ensures continuity in the overall production line. The vibrating feeding system prevents sudden loads, eliminating the risk of overloading on conveyor belts and thermal damage to equipment. Thanks to CONSTMACH's special design, the vibrations in the bunkers are smooth and balanced. This ensures both a steady material flow and extended machine life. Otherwise, uneven feeding could cause serious wear on crusher hammers, conveyor belts, and bearings. Using a vibrating feeder bunker helps reduce maintenance costs, increase operational efficiency, and maintain long-term performance throughout the facility. Dodpsxqf Sdsfx Addecr Vibrating Feeder Bunker Technical Specifications Model: CPG - 09 Body Size: 2,500 x 520 mm Grid Size: 820 mm Motor Power: 2 x 3 kW Bunker Volume: 8 - 10 - 15 m³ Capacity: 80 - 100 t/h Weight: 8,000 kg Model: CPG - 10 Body Size: 3,000 x 850 mm Grating Size: 1,160 mm Motor Power: 2 x 4.5 kW Hopper Capacity: 10 - 15 - 20 m³ Capacity: 150 - 200 t/h Weight: 12,000 kg Model: CPG - 11 Body Dimensions: 4,600 x 1,100 mm Grate Dimensions: 1,400 mm Motor Power: 2 x 9.2 kW Bunker Volume: 15 - 20 - 30 m³ Capacity: 200 - 300 t/h Weight: 18,000 kg Model: CPG - 13 Body Size: 4,880 x 1,370 mm Grating Size: 1,840 mm Motor Power: 2 x 11 kW Bunker Volume: 30 - 45 - 50 m³ Capacity: 350 - 500 t/h Weight: 26,000 kg Why Choose CONSTMACH Vibrating Feeder Bunkers? CONSTMACH is a trusted brand in the industry with years of engineering experience and high production standards. Our products stand out with their durable body structure, low maintenance requirements, and energy-efficient motor systems. Each one undergoes high-quality control processes to ensure long-lasting use. CONSTMACH Vibrating Feeders increase the performance of your crushing plant while minimizing your operating costs. If you are looking for quality, durability, and maximum efficiency, CONSTMACH is the right solution. What Do We Do at Constmach? Constmach is a leading machine manufacturer serving the construction and mining industries with a wide range of products. Our product portfolio includes concrete block making machines, stationary and mobile concrete plants, stone crushing machines, stone crushing and screening plants, sand washing machines, sand making machines, asphalt plants, conveyor belt systems, jaw crushers, and mobile crushing plants. With its high quality standards, innovative production approach, and customer-focused solutions, Constmach stands out as a reliable brand in both national and international markets. Our products continue to be the preferred choice of industry professionals due to their durability, efficiency, and long-lasting performance.

Year of construction: 2019, condition: excellent (used), WHEEL TROLLEYS / ROLLING CONTAINERS 3-sided WIRE MESH ROLL CONTAINER rolling trolley 810 x 720 mm slanted rolling floor brings additional safety when transporting all kinds of goods Parcel trolley, parcel trolley, DHL parcel trolley, mail trolley, DHL trolley also ideal for firewood storage and for yellow bags total height 1730 mm Item no.: RW-3173 price: 75,-€ net / per piece used with traces of use and occasional paper remnants fully functional / ready for immediate use roll containers are all neutralized, that means a name print or a reference to previous owner is not visible. Roll carts are fully assembled, so they are also offered as pictured (Seen new for: 1 piece a 189,- €) currently about 5000 trolleys in stock. article is used & extremely stable loadable up to 500 kg We offer as shown Article can be visited after arrangement gladly Description: (ideal also suitable for up to 5 intermediate shelves, see more photos Intermediate floors do not belong to the offer, but are available on request) POSSIBLE TO COLLECT after notification ex STORE 47441 MOERS Viewing is expressly offered, if interested, the article can be taken away immediately Description: Plastic roll plate type 724x815 mm; with 2 reinforcing irons. with castors ø 108 mm polypropylene, 2 swivel castors / 2 fixed castors Dcsdpfxeh S E A Eo Addsr tube diameter for steel superstructures with tube Ø 22 mm load capacity: 500,00 kg Color: yellow bottom plate / red seioten grating and red back wall grating 2 side grids useful height 1600 mm total height: 173 cm Infill: 7 x vertical flat bars 12 x 3 mm 2 x horizontal flat bars 12 x 3 mm 1 x cross tube ø 16 mm 1 back wall incl. 4 plastic clamps with screws and nuts for connection with the side grid inclined rolling floor sloping down to the back We are happy to buy used rolling containers, even in large quantities. JS Trading Ltd. Photos similar

Condition: used, mileage: 5,39,845 km, power: 294 kW (399.73 HP), fuel type: diesel, gearing type: automatic, axle configuration: > 3 axles, overall weight: 32,000 kg, first registration: 06/2014, next inspection (TÜV): 02/2025, loading space length: 9,400 mm, loading space width: 2,550 mm, color: silver, Year of construction: 2014, total width: 2,550 mm, total height: 3,350 mm, Equipment: ABS, air conditioning, 4-axle machine transporter for aerial platforms, construction equipment MAN 35.400 / 8x2 * MAN * Model 35.400 / 8x2 * Body by Zanner * Year of manufacture 2014 * Mileage 539,845 km according to odometer * Driven by 6-cylinder diesel engine with 295 kW / 360 HP * Displacement 10,518 cm³ * Automatic transmission, differential lock, retarder * Wheelbase 1-2: 1850 mm / 2-3: 4150 mm / 3-4: 1350 mm, axle configuration 8x2 * Tire size 385/55R22.5, tread depth from 4 mm to 12 mm * Overall dimensions (L x W x H): 12,250 x 2,550 x 3,350 mm Dcsdoxpl Ehopfx Addjr * Gross weight 32,000 kg, unladen weight 17,780 kg, payload 14,740 kg * Body dimensions (L x W x H): 9,450 x 2,550 x 3,400 mm, loading height 1,200 mm * Ball-head trailer coupling, PTO, beacon light, 2 seats * Hydraulic supports * Hydraulically split, sliding ramps 4,200 x 820 mm * Grating floor, winch with remote control This description does not constitute a binding offer and may contain errors. No guarantee for the accuracy of all information. Please also visit our homepage.

Condition: good (used), Year of construction: 2007, functionality: fully functional, power: 7.63 kW (10.37 HP), total width: 2,300 mm, total length: 4,000 mm, total height: 3,000 mm, type of input current: three-phase, pressure: 6 bar, input voltage: 400 V, nominal heat output: 950 kW (1,291.64 HP), operating pressure: 6 bar, Equipment: hot water, type plate available, The Pyrtec boiler system is an underfeed stoker combustion unit with internal grate and burnout grate for universal application, and is suitable for a particularly wide fuel spectrum, ranging from dry wood waste to wet forest wood chips. Maximum water content w= 50%, corresponding to a wood moisture u of 100%. The complete boiler system is type-approved (Approval No.: 02-221-512) with continuous quality control by TÜV and consists of the following components: FEED AUGER WITH BACK-BURN BARRIER LAYER: The feed auger transports the fuel into the combustion chamber and the grate area of the fireblock. The robust auger flights are made from heat-resistant chromium steel in the combustion chamber area. The feed tube is equipped with mounts for the back-burn thermostat and the thermal extinguishing valve. Above the auger is a dosing container with a photoelectric sensor for level control of the fuel barrier layer required by TRD 414. The drive is provided by a maintenance-free helical gear motor and chain drive enclosed in a dust-tight chain guard. Accessoires: Extinguishing valve with dirt strainer COMBUSTION BLOCK: Solid combustion block with multiple layers of insulation and high-quality chamotte lining. The feed and grate area consists of the fire chamber, gasification grate, and descending burnout grate. All of these components are made of highly heat-resistant cast steel (Material No. 1.4868), at least 12 mm thick and individually replaceable. This type of primary combustion system has proven to be extremely effective even with challenging fuels (wet sawmill residues, high bark content, etc.). Ash and foreign substances falling through the grates can easily be removed from outside through access holes sealed with covers. The horizontal combustion chamber is optimally shaped for complete burnout and also provides a large ash compartment. The combustion chamber door is heavy-duty, well-insulated, and can be ideally swung aside on a robust double-joint hinge for maintenance purposes. BOILER: Horizontal hot water boiler in three-pass design, mounted on the fireblock, insulated and stylishly clad. The insulated boiler front door is designed to allow the installation of an oil or gas burner. Operating temperature: max. 120 °C Operating pressure: 3.0 bar Test pressure: 6.0 bar FLUE GAS DUST COLLECTOR PYRTEC-140 to PYRTEC-650: Constructed in axial cyclone design, fully insulated and mounted to the boiler. Equipped with two insulated cleaning covers, an ash container with quick-release fastener, and mounting flange for the flue gas fan. FLUE GAS DUST COLLECTOR PYRTEC-1000: Constructed in axial cyclone design, fully insulated, free-standing for optimal placement. Includes two insulated cleaning covers, mounting flange for the flue gas fan, and connection for the ash container. FLUE GAS FAN: Dodpfx Aexwhw Aoddjcr Specially designed fan for wood combustion operation, very quiet, with a heavy-duty, heat-resistant motor and flexible heat-dissipating hub. The fan housing can be continuously rotated at the intake, with a round exhaust outlet.

Year of construction: 2006, condition: used, functionality: fully functional, Multi-purpose chamber furnace line consisting of the following components: Dcsdpfxjxwn R Nj Addsr • Aichelin chamber tempering and stress-relief furnaces VKHLE 4/2-70/85/130 (2 units) • Aichelin chamber preheating furnace VKHLG 4/2-70/85/130 (1 unit) • Aichelin single-chamber continuous furnace DGKS 4/2-70/85/130 (3 units) • Aichelin chamber washing machine EKFG 4/2-70/85/130 (1 unit) • Aichelin loading/unloading trolleys (2 units) • Aichelin table loader storage station (1 unit) • Aichelin transfer table storage station (1 unit) • Aichelin cooling unit storage station (2 units) • Storage stations (30 units) • Charging racks • Spare parts for the line Useful load: Grate length: 1300 mm Grate width: 700 mm Loading height above grate: 800 mm Max. batch weight: gross max. 1000 kg/grate Aichelin chamber tempering and stress-relief furnace VKHLE 4/2-70/85/130: External dimensions: Width: approx. 1820 mm Height: approx. 4050 mm Length (incl. control cabinet): approx. 3300 mm Working height above floor: 1600 mm General data: Maximum temperature: 350°C Operating temperature: 150-200°C Number of temperature control zones: 1 Chamber preheating furnace VKHLG 4/2-70/85/130: External dimensions: Width (incl. control cabinet): 3035 mm Height (overall): 4450 mm Length (overall): 3450 mm Loading height above floor: 1600 mm General data: Maximum temperature: 600°C Operating temperature: 400-500°C Number of temperature control zones: 1 Single-chamber continuous furnace DGKS 4/2-70/85/130: External dimensions: Width (incl. control cabinet): approx. 3400 mm Height (incl. maintenance platform): approx. 5300 mm Length (incl. exhaust hood): approx. 6850 mm Working height above floor: 1600 mm General data: Maximum temperature: 1050°C Operating temperature oven: 750-1000°C Temperature control range oil bath: 60-150°C Gross batch weight at 950°C (max.): 1000 kg Max. gross heating capacity from 25 to 850°C (max.): 800 kg/h Number of temperature control zones in oven and oil bath: 1 + 1 Oil bath volume: approx. 6.5 m³ Cooling capacity oil bath (at 90°C bath temperature): 80 kW Chamber washing machine: External dimensions: Width: 2900 mm Height (above hall level): 4000 mm Length: 3150 mm Loading height: 1600 mm General data: Washing fluid temperature: 50-80°C Spray fluid temperature: 50-80°C Bath volume, washing fluid: 4550 l Bath volume, spray fluid: 4700 l Gross weight incl. batch and washing fluid: 125 kN Loading table: Width: approx. 2200 mm Length: approx. 3200 mm Loading height: 1600 mm Weight (incl. batch): approx. 29 kN Batch cooling stations: Length: approx. 2100 mm Width: approx. 800 mm Height: approx. 4350 mm Loading height: 1600 mm Weight (incl. batch): approx. 20 kN Preparation table fixed: Length: approx. 2100 mm Width: approx. 800 mm Loading height: 1600 mm Weight (incl. batch): approx. 25 kN Preparation table, hydraulically height-adjustable: Length: approx. 2100 mm Width: approx. 800 mm Lift: 1000 mm Loading height: 1600 mm Lifting capacity: 2.0 T Weight (incl. batch): 25 kN The sale covers the entire multi-purpose chamber furnace line. Individual furnaces, systems, or components cannot be purchased separately. The complete chamber furnace line must be dismantled, loaded, and transported by the buyer at their own expense. Inspection appointments can be arranged on request.

Condition: ready for operation (used), Belt fed slicer, used by many small to large processing companies for batch runs up to a few hundred pounds per hour. Can slicer, stick cut, shred, grate many different vegetables or cheeses. Portable slicer. Easy to use. Djdpfx Aou I Rv Roddscr New belts, New twin blade cutting assembly, New Control Panel. Tested ready to run

Year of construction: 2023, condition: new, PLASMA CUTTING MACHINE MODEL MTX 1500/3000 Construction: steel+aluminium Overall dimensions: 3350/2200/1300 Working area: 3100/1520/140 XY axis drive: 4Nm stepper motors with gears, precision grade 8 Z axis drive: stepper motor ball screw Travel speed: up to 25m/min Z axis control system: THC My plasma system Collision protection system to prevent burner damage Linear guide: TBI Automatic material detection system Power supply: 240V Maximum load: 1700kg Total weight: 1200kg net INCLUDED: Dcsdpfsh Rabnsx Addor - control panel -water table -exchangeable grate -control software in German, English, Polish -Certification of conformity CE - DTR - warranty The possibility of selecting the appropriate Hypertherm cutter to individual needs of the company.

Condition: used, maximum load weight: 24,420 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 08/2016, next inspection (TÜV): 06/2026, loading space length: 9,300 mm, loading space width: 2,470 mm, loading space height: 3,070 mm, total width: 2,550 mm, total height: 4,000 mm, Equipment: ABS, Wiese 3-Axle Step-Frame Semi-Trailer ? SA-48-CS-S ? Hydraulic Ramp 25t ? Oversize ? Forklift Transport ----Highlights * Hydraulic loading ramp, 25,000 kg capacity (WFB 25 S) * Rear portal hydraulically extendable to approx. 3,600 mm * Lift axle + trailing steering axle * Curtainsider body with roof-loading capability * 40 mm phenolic resin floor, suitable for forklifts * Numerous lashing points, perforated outer frame, reinforced construction * Extension tarp & oversize signs * Electric-hydraulic unit with remote control ----Technical Data Type: SA-48-CS-S * Gross vehicle weight: 48,000 kg * Fifth wheel load: 18,000 kg * Axle load: 30,000 kg * Unladen weight: approx. 11,500 kg * Overall height: approx. 4,000 mm Interior dimensions * Raised bed: 4,150 mm * Low bed: 9,300 mm * Interior width: 2,470 mm * Interior height, raised bed: approx. 2,670 mm Dodpfexwrbrex Addjcr * Interior height, low bed: approx. 3,070 mm * Coupling height: 1,150 mm ----Chassis & Body * Reinforced steel welded frame * Perforated outer frame * 16 pairs of flush lashing points * 4 pairs of additional 8t lashing eyes in the low bed * Curtainsider body * Roof can be opened from both front and rear * 4 rows of aluminium slats + 2 rows of wooden slats * Reinforced rear portal * 40 mm anti-slip phenolic resin floor (forklift accessible) ----Axles & Tyres * 3 × 10,000 kg SAF-ECO drum-braked axles * Air suspension with raise/lower function * A-axle: lift axle * C-axle: trailing steering axle (friction steered) * Tyres: 245/75 R17.5 ----Brake & Electrics * Pneumatic brake, ABS (4S/3M WABCO) * EBS braking system * Spring loaders on 2 axles * 24V system, 2× 7-pin + 1× 15-pin connectors * Europoint tail lights, side markers ----Hydraulic Ramp / Rear (WFB 25 S) * Extremely robust: Load capacity 25,000 kg * Length: approx. 3,100 mm * Galvanized heavy-duty grating * Usable as loading and drive-over ramp * Hydraulic rear stabilizer * Emergency and remote control operation * Robust, low maintenance ----Special Equipment * Work lights on front wall * 3 large internal storage compartments * Oversize signs * Interior extension tarps * Chain compartment within floor * Plastic mudguards + splash flaps * Lateral underrun protection (anodized aluminium) * 2 storage boxes ----Paintwork * Chassis: RAL 5002 * Body: RAL 5002 * Tarp: similar to RAL 5002 For further information, we will be happy to assist you.

Year of construction: 2022, condition: excellent (used), functionality: fully functional, The Mini Spray Dryer B-290 is the laboratory equipment of your choice for the quick and gentle drying to powder of liquid end products. The impressive features of the Spray Dryer include its efficient performance with very short set-up times, an effective inte grated nozzle cleaning mechanism and a high degree of flexibility thanks to the different cylinder geometries. Djdpsxwdb Djfx Addecr

Condition: good (used), Year of construction: 2020, operating hours: 206 h, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 88 mm, Waterjet Cutting Machine Multicam V-204-W with High-Pressure Pump KMT Streamline SL-VI 50 STD and Abrasive Feeder KMT Abraline V Year of manufacture: 2020 Operating hours: Only 206h !!! (read directly from the high-pressure pump) Complete documentation available. The cutting tank is fitted with grating supports. It can also be equipped with the original plastic supports (approximate cost: €3,000). (Y) Axis ... 1524 mm (X) Axis ... 3048 mm (Z) Axis ... 88.9 mm Position accuracy: +/-0.001″ Repeatability: +/-0.002″ Rapid traverse (max): 1000 IPM Cutting speed (max): 800 IPM Djdpfxjxg Nnno Addecr EQUIPPED WITH: - KMT Streamline SL-VI 50 STD, 50 Hp (37 kW) – 500 - 3,800 bar - Dual side stepper motors - Multicam hand-held graphic interface - KMT Abraline V – Highly accurate abrasive feeding/hopper system

Condition: used, This listing is for The Molecular Devices VERSAmax microplate reader The unit is in full working condition and is ready for immediate release. Djdpfx Adexwc Rdjdocr The Molecular Devices VERSAmax microplate reade is a versatile instrument designed for precise absorbance measurements across a wavelength range of 340 to 850 nm. Utilizing a grating monochromator, it allows users to select exact wavelengths without the need for filters, offering flexibility for various assays. The reader supports dual-wavelength readings and accommodates different plate types, including round-bottom, flat-bottom, and half-area well plates. Temperature control up to 45°C enables kinetic assays under controlled condition

Condition: good (used), Year of construction: 2008, Ilpra Foodpack FP1402 V/G Serial no: FP6854 (2008) Tray sealer with GasMix GM Series gas mixer, Serial no: 2011/PA/00286 (2011) tooling 3 - across 180 x 250mm external with Busch vacuum pump, reel lift trolley, wall mounted transformer and 4 additional sets of tooling (including 3 - across 180 x 250mm, 3 - across 180 x 280mm, 3 -n across 165 x 200mm). FoodPack 1402 is a fully automatic in-line traysealer suitable for medium to high production, designed to be easily integrated into an automated production line and customisable according to specific production requirements. Characterized by a compact design, FoodPack 1401 guarantees low running costs and can work in soldering only, vacuum and protective atmosphere. • Hygiene and accessibility: being constructed in stainless steel and in compliance with IP 65 class protection, the FP 1402 is suitable to work in aggressive environments. The working surfaces and the grating doors are made in such a way to prevent water or liquid stagnation. Inspection and washing operations of the machine become extremely simple and quick. • High technology: the changeover is quick and easy; the 1402 machine gets promptly ready to package a different size. The machine is equipped with colour touch screen, combined with simple and friendly-use software (able to store up to 40 different working menus). • Compact design: the 100 m3 vacuum pump is lodged inside the machine, thus reducing the overall dimensions. Dcjdpfx Adou Tugzsdsr • Customization: on request, a wide range of options are available to meet as much as possible the customer’s requirements. Main technical data Machine dimensions (mm) 4950 x 900 x 1440 Machine weight (Kg) approx. 750 Installed Power (Kw) 6 Kw, 400 V, 50 Hz Air consumption (bar – Nlt/cycle) 6 bar – 50 lt/cycle Welding Area (mm) 400 x 270 x 120 Output max 15 cycles/min Protection class IP 65

Year of construction: 2023, condition: new, PLASMA PLOTTER MODEL MTX 2040 Construction: steel+aluminum Working field: 4000/2000/200 XY axis drive double-sided gate drive: 4Nm stepper motors with gears, gear strips Z axis drive: stepper motor ball screw Travel speed: up to 25m/min Z axis control system: THC My plasm system Linear guides: TBI IGUS guide Automatic material detection system Power supply: 240V Permissible load: 2000kg Total weight: 800kg net USB port for opening projects and transferring files using external pen-drives Sheet metal detection system Dcjdoiphrlepfx Adder THC cutting height control system TBI wire guides Double-sided gate drive: X-axis stepper motor and gear rails Y axis stepper motor and toothed rails Z axis stepper motor and ball screw Drives realized with TBI brand HGR 20 rails Table equipped with water grate- (Water table, giving cleaner cutting, material cooling and reducing gas emission during machining) INCLUDED: -water table -interchangeable grate -control software in Polish -Declaration of Conformity CE - DTR - warranty. -start-up and training included in the price The latest control system available in our plotters: Integrated THC height controller Anti-diving torch function Types of accepted files : DXF, PLT ( hpgl ), G-Codes (.tap) Integrated CAM module: MyMini CAM -. Automatic object recognition Ven. External. Path analysis in advance Cutting parameter database Correction of design angle to material Ability to cut from any point Possibility of cutting from the end Import of DXF,PLT or G-CODES Automatic generation of paths with offsets, entries and exits The program can be used with an external CAM program Separate speed for holes Parameter database Project correction to material angle Soft and Hardware limits THC anti-diving functions Game pad control capability Material detection by touch system, floating head WHY IT'S WORKING WE ARE A POLISH MANUFACTURER OF PLASMA BURNERS CLOSE COOPERATION WITH PROMA-ELECTRONIKA COMPANY (PRODUCER OF THC) PROFESSIONAL GUIDES OF THE RENOWNED COMPANY HIWIN, A FEATURE OF THESE GUIDES IS VERY LONG LIFE, HIGH QUALITY OF CUTTING NOT REQUIRING FURTHER PROCESSING COMPONENTS SUCH AS GEARS, MOUNTS, HANDLES, ETC. ARE MADE BY US USING CNC TECHNOLOGY, WHICH RESULTS IN HIGH QUALITY AND REPEATABILITY OUR STRENGTHS HIGH CLASS SHIELDED CABLES INDUCTIVE SENSORS ON ALL AXES, WHICH ARE NOT SUBJECT TO DUST JAMMING ADVANCED THC MY PLASM SMOOTH BURNER OPERATION CPC INTERFACE (VOLTAGE DIVIDER SEPARATOR) MOUNTED ON CUTTING MACHINES WE ASSEMBLE CUTTING MACHINES DELIVERED BY A CUSTOMER OR WE PURCHASE CUTTING MACHINES MEETING CUSTOMER'S REQUIREMENTS WE ASSIST IN ARRANGING LEASES It is possible to select the appropriate cutting machine to individual needs of the company. We offer other dimensions of tables.

Condition: used, maximum load weight: 24,420 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 08/2016, next inspection (TÜV): 06/2026, loading space length: 9,300 mm, loading space width: 2,470 mm, loading space height: 3,070 mm, total width: 2,550 mm, total height: 4,000 mm, Equipment: ABS, WIESE 3-Axle Step-Frame Semi-Trailer | SA-48-CS-S | Hydraulic Ramp 25t | Oversize Load | Forklift Transport — Highlights — • Hydraulic loading ramp, 25,000 kg (WFB 25 S) • Rear portal hydraulically extendable to approx. 3,600 mm • Lift axle + steering trailing axle • Curtainsider body with roof loading option • 40 mm phenolic plywood floor, suitable for forklifts • Numerous lashing points, slotted outer frame, reinforced design • Extension tarp and oversize warning boards • Electrically-hydraulic unit with remote control — Technical Data — Type: SA-48-CS-S • Gross vehicle weight: 48,000 kg • Fifth-wheel load: 18,000 kg • Axle group: 30,000 kg • Unladen weight: approx. 11,500 kg • Overall height: approx. 4,000 mm Internal dimensions: • Upper deck: 4,150 mm • Lower deck: 9,300 mm • Internal width: 2,470 mm • Upper deck internal height: approx. 2,670 mm • Lower deck internal height: approx. 3,070 mm • Fifth-wheel coupling height: 1,150 mm — Chassis & Body — • Reinforced steel welded frame • Outer frame with slotted rails • 16 pairs flush-fitted lashing points • 4 pairs extra 8t lashing rings in lower deck • Curtainsider body • Roof opens from front and rear • 4 rows aluminium slats + 2 rows wooden slats • Reinforced rear portal • 40 mm anti-slip phenolic plywood floor (forklift proof) — Axles & Tyres — • 3 × 10,000 kg SAF ECO drum-braked axles • Air suspension with raise/lower function Djdpfexwrbfex Addecr • Axle A: lift axle • Axle C: steering trailing axle (friction-steered) • Tyres: 245/75 R17.5 — Brakes & Electrics — • Compressed air brake, ABV (4S/3M WABCO) • EBS braking system • Spring brakes on 2 axles • 24V system, 2× 7-pin + 1× 15-pin connectors • Europoint tail lights, side markers — Hydraulic Ramp / Rear — Type: WFB 25 S | extremely robust • Load capacity: 25,000 kg • Length: approx. 3,100 mm • Galvanized heavy-duty grating • Usable as loading and drive-over ramp • Hydraulic rear support • Emergency and remote control • Robust, low-maintenance — Special Equipment — • Work lights on front wall • 3 large internal storage compartments • Oversize warning boards • Extension tarps (internal) • Chain compartment in the floor • Plastic mudguards + splash guards • Side underrun protection (anodized aluminium) • 2 toolboxes — Paint — • Chassis: RAL 5002 • Body: RAL 5002 • Curtain: similar to RAL 5002 For more information, please feel free to contact us.

Year of construction: 2018, condition: ready for operation (used), Components: control cabinets, machine body (cabin, turbines, outlet, inlet), platform with processing unit and bunker, sound insulation cabin, impact box, bucket elevator, gratings, ladder, pre-impact box, small parts, piping, cable ducts, blasting media and refill silo, compressed air connection: 1/2 inch at 4–6bar, compressed air consumption: approx. 1.5m³/h, processed according to DIN ISO 8573-1, solid particle size: 1µm, density: 1mg/m³, water content: pressure dew point 3°C, oil content: 1mg/m³, length: 11,000mm, height: 5907mm. An on-site inspection is possible. Dcsdpfjxtprtex Adder

Condition: excellent (used), functionality: fully functional, Year of construction: 2023, operating hours: 275 h, The mobile loader RVM - 180E is a single-axle trailer with a receiving platform and unloading auger. Along the entire length of the lower section of the platform, there are 8 (eight) augers, each 3,000 mm long and Ø 130 mm, and one movable auger 2,100 mm long with a Ø of 300 mm, all covered at the top by special protective grates. In the center of the loader, there is a folding unloading auger with a diameter of 400 mm, operated by a hydraulic cylinder. Please omit the electrical section in the manual, as these devices do not have an electric motor; they require a tractor for operation. Dedpfsxqx Rmsx Addocr

Condition: new, neu ca. 12 - 14 Wochen ab Auf Deutschland 25230 € 481.89 € 1250x2500 mm HYPERTHERM Powermax 45 XP 6 mm 12 mm 25 mm 4 mm 45 A 45 A 50 % ED, 32 A 100 % A 24 m/min 1/10 mm 470 l 500 kg/m² 3060 mm 1760 mm 1500 mm 500 kg Dcsdpfx Aowiryujddsr compressed air powered plasma sourceHYPERTHERM Powermax 45 XP CNC-workbench software (external PC not included) adjustable rollers precision profile rail guide(HiWin) zero backlash HTD drive belt driven by step motors solid frame construction seperate renewable support grate water trough to catch flying sparks swimming burner bearing in combination with exchangeable slide screws, enables constant cutting height hand operation unit for comfortable processing and set up on the workpiece users manual in GERMAN according to CE rules ALTERNATIVE PLASMA SOURCES: HYPERTHERM PMX 65 Sync PMX 85 Sync PMX 105 Sync PMX 125 Sync plasma type comp. air comp. air comp. air comp. air plunge power 16 mm 20 mm 22 mm 25 mm seperating cut 32 mm 38 mm 50mm 57mm recommended thickness (unalloyed steel) 6 mm 16 mm 19 mm 22mm max. thickness (unalloyed steel) 16 mm 20 mm 22 mm 25 mm price € 26.820,- € 28.440,- € 30.100,- € 33.290,- (Hypertherm MaxPro200 and KJELLBERG plasma sources available on reques) OPTIONS: water tank to quickly fill and drain thetrough € 2.560,- height adjustment by arc voltage € 2.450,- set-up laser € 240,- pneumatic marking pin € 770,- pneumatic engraver € 1.920,- suction bridge (prepared for suction diam.160mm, important for galvanized and thin sheets) € 1.020,- suction- and filter unit Caremaster IFA 1,1 kW, fan power 2.500 m³/h € 2.950,- higher gantry 200 mm € 710,- higher gantry 300 mm € 900,- automatic nesting € 500,- PlasmaScan camera system € 830,- ohmic contacting for MaxPro200 € 280,-

Condition: new, empty load weight: 2,780 kg, maximum load weight: 7,720 kg, overall weight: 10,500 kg, axle configuration: 2 axles, loading space length: 6,280 mm, loading space width: 2,480 mm, suspension: steel, tire size: 245 / 70 R 17,5, wheelbase: 990 mm, color: other, gearing type: other, front tire size: 245 / 70 R 17,5, rear tire size: 245 / 70 R 17,5, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, each ramp approx. 2,700 mm long x 560 mm wide, ramps with gratings, loading height: 840 mm, 12 lashing eyes each 2.5 t, 8 x lashing eyes each 6 t, wooden planks 50 mm, loading area rear sloping, rear stanchion removable, front for through-loading, , Also available in 5,300 mm loading area length! , , , -- Misprints, errors and omissions excepted, sample pictures --, More data under: !, More Details: ! Dcjdpjxghutefx Adder

Condition: new, neu ca. 12 - 14 Wochen ab Auf Deutschland 28370 € 541.87 € 1500x3000 mm HYPERTHERM Powermax 45 XP 6 mm 12 mm 25 mm 4 mm 45 A 45 A 50 % ED, 32 A 100 % A 24 m/min 1/10 mm 630 l 400 kg/m² 3560 mm 1960 mm 1500 mm 650 kg compressed air powered plasma sourceHYPERTHERM Powermax 45 CNC-workbench software (external PC not included) adjustable rollers precision profile rail guide(HiWin) zero backlash HTD drive belt driven by step motors solid frame construction seperate renewable support grate water trough to catch flying sparks swimming burner bearing in combination with exchangeable slide screws, enables constant cutting height hand operation unit for comfortable processing and set up on the workpiece users manual in GERMAN according to CE rules ALTERNATIVE PLASMA SOURCES: HYPERTHERM PMX 65 Sync PMX 85 Sync PMX 105 Sync PMX 125 plasma type comp. air comp. air comp. air comp. air plunge power 16 mm 20 mm 22 mm 25 mm seperating cut 32 mm 38 mm 50mm 57mm recommended thickness (unalloyed steel) 6 mm 16 mm 19 mm 22mm max. thickness (unalloyed steel) 16 mm 20 mm 22 mm 25mm price Dodpfx Ajwirx Reddscr € 29.960,- € 31.580,- € 33.240,- € 36.420,- (Hypertherm MaxPro200 and KJELLBERG plasma sources available on reques) OPTIONS: water tank to quickly fill and drain thetrough € 3.500,- height adjustment by arc voltage € 2.450,- set-up laser € 240,- pneumatic marking pin € 770,- pneumatic engraver € 1.920,- suction bridge (prepared for suction diam.160mm, important for galvanized and thin sheets) € 1.020,- suction- and filter unit Caremaster IFA 1,1 kW, fan power 2.500 m³/h € 2.950,- higher gantry 200 mm € 710,- higher gantry 300 mm € 900,- automatic nesting € 500,- PlasmaScan camera system € 830,- ohmic contacting for MaxPro200 € 280,-

Condition: new, neu ca. 4 Monate ab Auftragse Dcsdpfx Adjwirbreder Italien 117000 € 2211.3 € 125 to 500 mm 800 x 400 mm 900 x 600 mm 600 mm 300 mm 115 mm/s 42 mm/s 7 mm/s 70 mm/s 15 kW 1400 mm 1950 mm 2600 mm 4 guides for the slide T-slots in the table Rexroth hydraulic unit Monitored electrovalves Air/oil heat exchanger Pressure switch Double pushbuttons control Stroke adjustment by limit switch microns Siemens CPU Lateral fixed protrection grates CE certification following "IV enclosure" OPTIONS(prices on request): Blank holder Prismatic guides Frontal light curtain CNC control Siemens with touchscreen Hydraulic pump with variable flow Proportional valves Lateral sliding guides with security microns

Condition: new, neu ca. 12 - 14 Wochen ab Auf Deutschland 22750 € 436.8 € 1000x2000 mm HYPERTHERM Powermax 45 XP 6 mm 12 mm 25 mm 4 mm 45 A 45 A 50 % ED, 32 A 100 % A 24 m/min unter 1/10 mm 300 l 400 kg/m² 2560 mm 1460 mm 1500 mm 400 kg compressed air powered plasma sourceHYPERTHERM Powermax 45 XP CNC-workbench software (external PC not included) adjustable rollers precision profile rail guide(HiWin) zero backlash HTD drive belt driven by step motors solid frame construction seperate renewable support grate water trough to catch flying sparks swimming burner bearing in combination with exchangeable slide screws, enables constant cutting height hand operation unit for comfortable processing and set up on the workpiece users manual in GERMAN according to CE rules alternative plasma sources: HYPERTHERM PMX 65 Sync PMX 85 Sync PMX 105 Sync PMX 125 plasma type comp. air comp. air comp. air comp. air plunge power 16 mm 20 mm 22 mm 25 mm seperating cut 32 mm 38 mm 50mm 57mm recommended thickness (unalloyed steel) 6 mm 16 mm 19 mm 22mm max. thickness (unalloyed steel) 16 mm 20 mm 22 mm 25mm price € 24.340,- € 25.960,- Dcsdpfxjwiq Scs Adder € 27.620,- € 30.800,- (Hypertherm MaxPro200 or KJELLBERG plasma sources available on request) options: water tank to quickly fill and drain thetrough € 2.560,- height adjustment by arc voltage € 2.450,- set-up laser € 240,- pneumatic marking pin € 770,- pneumatic engraver € 1.920,- suction bridge (prepared for suction diam.160mm, important for galvanized and thin sheets) € 1.020,- suction- and filter unit Caremaster IFA 1,1 kW, fan power 2.500 m³/h € 2.950,- higher gantry 200 mm € 710,- higher gantry 300 mm € 900,- automatic nesting € 500,- PlasmaScan camera system € 830,- ohmic contacting for MaxPro200 € 280,-