Used Gratings for sale (366)

Condition: excellent (used), Weiss temperature test chamber Here we offer a temperature test chamber. Weiss temperature test chamber water cooled Technical data: Test cabinet designation: WT-600/70 Outer dimensions with hinges and door lock height 1995 mm, width 1090 mm, depth 1660 mm Outer dimensions without hinges and door lock height 1995 mm, width 1000 mm, depth 1660 mm Internal dimensions: Height 950 mm, width 800 mm, depth 800 mm Test chamber capacity: approx. 600 liters cold / heat operation -70°C to 180°C Temperature change per time cooling approx. 2.5 K/min Heating up approx. 4 K/min 3/N/PE AC 400V ±10% 50Hz Rated power: 9.1 kW Rated current: 19 A Fuse on site: 32 A slow blow Permissible test material weight Total load of grate supports 80kg test chamber floor 80kg, insert grate 40kg Refrigerant: R 404A/R23 Weight: 675kg Type: WT-600/70 For you as a buyer for safety the following information! The following points are carried out on our offered chambers in advance: 1. functional check and exchange of necessary components 2. new filling with legally compliant refrigerant 3. after successful inspection, the chambers are subjected to a test run, which is monitored with calibrated equipment. Condition: used / used Ijdpfx Aoiqk Abjdweht Scope of delivery: (See picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: excellent (used), Weiss temperature chamber Here we offer a Weiss temperature chamber. Weiss temperature chamber air cooled with Weiss condenser cooler Test chamber capacity approx. 990 liters Data for temperature tests: Temperature range -40°C to +180°C Temperature deviation in time in center of chamber ± 0,1 to ± 0,5 K Temperature deviation spatially ± 0.5 to ± 2.0 K Temperature gradient (acc. to IEC 60068-3-5) 1 to 4 K Temperature change rate (according to IEC 60068-3-5) Heating 4 K/min Cooling 3 K/min Heat compensation max. 4500 W Feedthrough built into basic equipment R1: NW 125 mm L1: NW 50 m Dimensions: Test chamber dimensions: Width 1100 mm x depth 950 mm x height 950 mm Housing dimensions: width 1390 mm x depth 1525 mm x height 1995 mm maximum load (evenly distributed over the surface) of the test chamber floor 150 kg per insert grate 50 kg total load of the grate supports 100 kg Data for operation: Test room lighting halogen bulb 24V, 50W Rated voltage 3/N / PE AC 400 V ± 10% 50 Hz Rated power 11,5 kW Rated current 22 A Heat output water-cooled test chambers max. heat output to environment 1.3 kW Noise measurement: Sound pressure level approx. 64 dB(A) Refrigerant: ( converted to R-452a ) weight: approx. 840 kg Type: WT11-1000/40 Iedpsp Dun Uofx Adwjht For you as a buyer for safety the following information! The following points are carried out on our offered chambers in advance: 1. functional check and exchange of necessary components 2. new filling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a test run, which is monitored with calibrated equipment. Condition: used / used Scope of delivery: (See picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: excellent (used), CTS Temperature test chamber T-55/1000 Li water-cooled Temperature range: -50°C to +100°C Rated voltage: 400V 3/N 50Hz Rated power: 9.5 kW Nominal current: 18 A Compressor: TFH2511Z / TFH2511Z Refrigerant R404A/R23 The type designation of the CTS cabinet series is composed as follows: z. e.g. type T -55/1000/Li 1) T means: temperature 2) -55 means: lower temperature -55 °C 3) 1000 means: 1000 liter test chamber volume 4) Li means: special equipment for tests with lithium-ion accumulators Control: 32 bit controller LCD control panel Digital display of set and actual values Numerical input of setpoints Error messages in plain text Ethernet interface RS 232 interface Ihsdpfxovba Rao Adwst Free switching channels for on-site test material control Test room lighting: energy-efficient, high-intensity LED light strip mounted on the door Insert grid: Stainless steel, support surface 970 x 980 mm Load per shelf max. 35 kg Total load with max. grating load 100 kg 1a Feed-through NW50 1b Feed-through 2x NW125 1c Entry port 2x Rp 314° for Minimax Technical performance data: Temperature tests: Temperature range -50°C to +100°C Temperature deviation ≤ ±0.3 K in time Temperature change rate according to IEC 60068-3-5 Heating 2.5 K/min Cooling 2.5 K/min Heat compensation approx. 4000 W at +20°C approx. 2200 W at -40°C The technical data refer to an ambient temperature of +25 °C, rated voltage 400V, without test material, without heat compensation and without additional equipment. Options may affect the performance data. Dimensions: Test volume 1000 liters Test chamber dimensions Height, approx. 1000 mm, width, approx. 860 mm, depth, approx. 1100 mm External dimensions Height, approx. 1950 mm, width, approx. 1270 mm, depth, approx. 1900 mm Operating data: Electrical connection 400 V +6/-10 %, 3/N, 50 Hz Nominal current 18 A Rated power 9.5 kW Protection class IP 54 Sound pressure level < 58 dB(A) (according to DIN EN ISO 3744 measured at a distance of 1 m from the front) Mass approx. 1000 kg Heat output to the installation room 10.4 kW Cooling unit: water-cooled, low-noise, fully hermetic Infinitely variable output adjustment via electronic monitoring and control system, environmentally friendly refrigerant R404A/R23 The following information is for your safety as a buyer! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. if necessary, refilling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Year of construction: 2023, condition: like new (used), Thermo Fisher Iedpfxjv Hbvbs Adwsht Type: ARL easySpark metal analyzer Analysis table spectrometer with PC, monitor and software Thermo Scientific OXSAS 2.7 software OXSAS is the most modern software for optical emission spectrometers. Current analyses are displayed in tabs. Immediate editing of data sets using fill-down and increment-down tools OXSAS is a multi-processing application with amazing capabilities and potential. The comprehensive functionality of OXSAS enables it to meet all your requirements. Technical machine description: Condition: fully functional In mint condition Year of manufacture: 02/2023 Technical description of the system: The ARL easySpark metal analyzer is designed to meet the challenges and requirements of small to medium-sized plants and laboratories in the metal industry that require high-quality but cost-effective OES analysis for the production of parts for the automotive, aerospace, consumer goods and other industries. The device impresses with its particularly high resolution thanks to a unique optical system based on multi-grating/CCD (charge-coupled device). Additional benefits of the Thermo Scientific ARL easySpark analyzer include: The ability to accurately analyze all elements, from trace levels to percent, in all solid metal samples A breakthrough spark excitation and optical design to ensure best-in-class performance Intuitive, user-friendly Thermo Scientific OXSAS analysis software for a quick learning curve and easy routine operation A robust and reliable design that requires minimal maintenance Compliance with safety and quality guidelines A simple design that is suitable for both novice production users and expert lab staff The instrument is ideal for other areas such as metal recycling, academic and non-academic laboratories and primary metal producers where a cost-effective solution for analyzing metal products and materials for quality assurance and process control or a secondary instrument is required. Power connection: 110-230 VAC, 50Hz or 60Hz Max. power: 600 VA Dimensions: Approx. L x H x D 0.80m x 0.45m x 0.70m Weight: Approx. 80 kg Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data, information is subject to change!) We will be happy to answer any further questions you may have over the phone.

Condition: excellent (used), Optical emission spectrometer Ultima 2 benchtop device, sequence spectrometer with a 1m monochromator, 2400 g/mm grating in first and second order 160-800 nm without image Quick overview analysis IMAGE: Quick overview analysis IMAGE NAVIGATOR for JY 2000-2, Ihjdpour Rmvefx Adwot JY Ultima 2 or JY Ultima 2C External closed cooling circuit for cooling the Ultima 2's HF coil Argon humidifier - for analyzing solutions with a high salt content. ULTIMA 2 ICP-OES - Optical Emission Spectrometer reliable high-efficiency 40.68 MHz semiconductor generator complete and precise wavelength scan from 160 to 800 nm as standard highest practical resolution

Condition: new, empty load weight: 2,850 kg, maximum load weight: 7,650 kg, overall weight: 10,500 kg, axle configuration: 2 axles, loading space length: 5,280 mm, loading space width: 2,480 mm, suspension: steel, tire size: 245/70 R 17,5, color: other, gearing type: other, front tire size: 245/70 R 17,5, rear tire size: 245/70 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Each ramp approx. 2,700 mm long x 560 mm wide, ramps with grating, loading height: 840 mm, 10 lashing eyes each 2.5 t, 8 x lashing eyes each 6 t, steel side walls, foldable and removable, wood planks 50 mm, loading surface at rear beveled, inside loading width 2,480 mm, rear stanchion removable, front open for through-loading, Also available with a loading length of 6,300 mm!!, Rental price from 500 ¤, -- Printing errors, mistakes, and changes reserved, sample pictures --, More data at: !, More details: ! Ihsdpox Hprcofx Adwst

Condition: new, empty load weight: 3,050 kg, maximum load weight: 7,450 kg, overall weight: 10,500 kg, axle configuration: 2 axles, loading space length: 7,200 mm, loading space width: 2,470 mm, suspension: steel, tire size: 235 / 75 R 17,5, wheelbase: 990 mm, color: other, gearing type: other, front tire size: 235 / 75 R 17,5, rear tire size: 235 / 75 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, front for through-loading, loading height bel.: 880 mm, 400 mm drop sides, 16 x lashing eyes, stanchions, pluggable, loading area rear sloping, each ramp approx. 2,400 mm x 520 mm, ramps with gratings, , Also available in 5,200 mm or 6,200 mm loading area length!!! , , -- Misprints, errors and omissions excepted, sample pictures --, More data under: !, More Details: ! Ihodpox Hpq Ejfx Adwjt

Condition: new, empty load weight: 2,980 kg, maximum load weight: 7,520 kg, overall weight: 10,500 kg, axle configuration: 2 axles, loading space length: 6,280 mm, loading space width: 2,480 mm, suspension: steel, tire size: 245 / 70 R 17,5, wheelbase: 990 mm, color: other, gearing type: other, front tire size: 245 / 70 R 17,5, rear tire size: 245 / 70 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, each ramp approx. 2,700 mm long x 560 mm wide, ramps with gratings, loading height: 840 mm, 12 lashing eyes each 2.5 t, 8 x lashing eyes each 6 t, steel drop sides, foldable and removable, wooden planks 50 mm, loading area rear beveled, loading area width inside 2.480 mm, rear stanchion removable, front for through-loading, , Also available in 5,300 mm loading area length! , , -- Misprints, errors and omissions excepted, sample pictures --, More data under: !, More Details: ! Ihedpfx Aex Hpq Sedwjt

Condition: new, overall weight: 19,000 kg, axle configuration: 2 axles, loading space length: 6,700 mm, loading space width: 2,480 mm, suspension: air, tire size: 235 / 75 R 17,5, color: other, gearing type: other, front tire size: 235 / 75 R 17,5, rear tire size: 235 / 75 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, 400 mm side walls, steel side walls HOT-DIP GALVANIZED, with central stake on the side, plug-in, chassis: hot-dip galvanized, wooden floor, 14 lashing eyes in the outer frame, bevelled at the rear, 2 x ramps each 3,000 mm long x 725 mm wide, ramps with spring lifting mechanism, ramps with gratings also available in wood!, Loading height: 880 mm, , Also available in loading area length 7.20 m, available for immediate delivery., , Rental price from 580 euros, , --  Subject to printing errors, mistakes and changes, Sample images --, More data at: !, More details: ! Ijdpfxsx Hpr Ao Adwoht

Condition: new, empty load weight: 2,780 kg, maximum load weight: 7,720 kg, overall weight: 10,500 kg, axle configuration: 2 axles, loading space length: 6,280 mm, loading space width: 2,480 mm, suspension: steel, tire size: 245 / 70 R 17,5, wheelbase: 990 mm, color: other, gearing type: other, front tire size: 245 / 70 R 17,5, rear tire size: 245 / 70 R 17,5, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, each ramp approx. 2,700 mm long x 560 mm wide, ramps with gratings, loading height: 840 mm, 12 lashing eyes per 2.5 t, 8 x lashing eyes per 6 t, wooden planks 50 mm, loading area slanted at the rear, rear stanchion removable, front for through-loading, , Also available in 5,300 mm loading area length!!!, , Rental price from 500 ¤ , , , -- Misprints, errors and omissions excepted, sample pictures --, More data under: !, More Details: ! Ihodjx Hhqwopfx Adwst

Condition: used, Year of construction: 2023, CNC Gantry Plasma Cutting Machine with Rotator Manufacturer: Microstep Model: MasterCut 6001.30PtkG Year of manufacture: 2023 CNC control system Working area: 3,000 x 6,000 mm 1 plasma torch with Kjellberg Q3000 power source 1 oxy-fuel torch GCE FIT+ three (cutting gas: acetylene) Burning table with sectional exhaust system 6,000 x 3,000 mm "MasterCut" plasma rotator with fully automatic support ACTG automatic calibration unit for the beveling aggregate Kemper exhaust system 8000 (year 10/2015) Asper Basic 2D programming software + Asper BevelCut programming for bevel cuts Other technical data: Ihjdpfexu U Ddex Adwot MicroStep machine control with MMI console and 24" touchscreen iMSNC module expert system iMSNC module for automatic calibration of mechanical probing iMSNC module assistant for loading CNC programs LCD operating unit on the gantry Laser pointer with automatic offset transfer USB 3.0 interface for storage device MicroStep RemoteDiagnostics remote maintenance module Grate cover in the burning table Reinforced version of the burning table Connection of fine plasma source to CNC control Control for automatic gas console Electrical and mechanical torch height sensing LED signal tower on the gantry bridge (2 colors) Tactile shutdown device for guide rails Light barrier safety (collision protection) on gantry bridge via emergency stop Smart Z Movement ACTG Calibration Report Oxy-fuel support fully automatic Automatic gas console for oxy-fuel torch (cutting gas: acetylene) Active collision protection

Condition: good (used), Year of construction: 2020, operating hours: 206 h, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 88 mm, Waterjet Cutting Machine Multicam V-204-W with High-Pressure Pump KMT Streamline SL-VI 50 STD and Abrasive Feeder KMT Abraline V Year of manufacture: 2020 Operating hours: Only 206h !!! (read directly from the high-pressure pump) Complete documentation available. The cutting tank is fitted with grating supports. It can also be equipped with the original plastic supports (approximate cost: €3,000). (Y) Axis ... 1524 mm (X) Axis ... 3048 mm Isdpfx Ajxg Nnnedwsht (Z) Axis ... 88.9 mm Position accuracy: +/-0.001″ Repeatability: +/-0.002″ Rapid traverse (max): 1000 IPM Cutting speed (max): 800 IPM EQUIPPED WITH: - KMT Streamline SL-VI 50 STD, 50 Hp (37 kW) – 500 - 3,800 bar - Dual side stepper motors - Multicam hand-held graphic interface - KMT Abraline V – Highly accurate abrasive feeding/hopper system

Condition: used, STOW double-sided cantilever racks – used – excellent condition. The STOW wall-mounted cantilever rack is constructed of solid, heavy-duty steel profiles (I-beams) with high strength. It is equipped with 5 arms. The cantilever rack can be expanded with additional sections (modules), adapting it to changing storage needs. The offer applies to a STOW single-sided cantilever rack with 1 or 2 modules: Product code: MPP001693 Height: 750 cm Depth: 267 cm Number of levels: 0 + 5 Load capacity per arm: 1000 kg Height of I-beam profile cross-section: IPE 270 mm Net price: €1069.00 net per 1 module/section. Product code: MPP001694 Height: 750 cm Depth: 270 cm Number of levels: 0 + 5 Load capacity per arm: 1000 kg Height of I-beam profile cross-section: IPE 300 mm Net price: €1239.00 net per module/section. Product code: MPP001695 Height: 750 cm Depth: 353 cm Number of levels: 0 + 5 Load capacity per arm: 1000 kg Height of I-beam profile cross-section: IPE 330 mm Net price: €1569.00 net per module/section. Iedpfx Adox Ig Hmowsht Product code: MPP001699 Height: 750 cm Depth: 267 cm Spacing: 100 cm Number of levels: 0 + 5 Load capacity per arm: 1000 kg I-beam profile cross-section height: IPE 270 mm Net price: €2,079.00 net for 2 modules/sections. Product code: MPP001700 Height: 750 cm Depth: 270 cm Spacing: 100 cm Number of levels: 0 + 5 Load capacity per arm: 1,000 kg I-beam profile cross-section height: IPE 300 mm Net price: €2,479.00 net for 2 modules/sections. Product code: MPP001701 Height: 750 cm Depth: 353 cm Number of levels: 0 + 5 Load capacity per arm: 1000 kg Height of I-beam profile cross-section: IPE 300 mm Net price: €3139.00 net for 2 modules/sections. In addition, we have large quantities of storage racks from various companies, e.g. MECALUX, STOW, MAGO, BITO, SHAFER, WDX, SLP, DEXION PROMAG, etc., with high load capacity, available, undamaged, in very good technical condition, as well as comprehensive products for them, such as crossbars, mesh shelves, WEMA grates, bumpers, mounting anchors, etc. Of course, if you have your own transport, you can collect the goods from our warehouse in Chmielów 39-441 in Poland. * I have large quantities. * Transport possible throughout Europe. * Location: Poland

Condition: used, SSTOW single-sided cantilever racks – used – excellent condition. The STOW wall-mounted cantilever rack is constructed of solid, heavy-duty steel profiles (I-beams) with high strength. It is equipped with 5 arms. The cantilever rack can be expanded with additional sections (modules), adapting it to changing storage needs. The offer applies to a STOW single-sided cantilever rack with 1 or 2 modules (IPE 300): Product code: MPP001696 Height: 750 cm Depth: 157 cm Number of levels: 0 + 5 Load capacity per arm: 1000 kg I-beam profile cross-section height: IPE 300 mm Net price: €959.00 net per 1 module/section. Product code: MPP001698 Height: 750 cm Depth: 200 cm Number of levels: 0 + 5 Load capacity per arm: 1500 kg Height of I-beam profile cross-section: IPE 300 mm Net price: €1079.00 net per module/section. Product code: MPP001697 Height: 750 cm Depth: 217 cm Number of levels: 0 + 5 Load capacity per arm: 1500 kg Height of I-beam profile cross-section: IPE 300 mm Net price: €1195.00 net per module/section. Product code: MPP001702 Height: 750 cm Depth: 157 cm Spacing: 100 cm Number of levels: 0 + 5 Load capacity per arm: 1000 kg Height of I-beam profile cross-section: IPE 300 mm Net price: €1,909.00 net per module/section. Product code: MPP001704 Height: 750 cm Depth: 200 cm Spacing: 100 cm Number of levels: 0 + 5 Load capacity per arm: 1500 kg Height of I-beam profile cross-section: IPE 300 mm Net price: €2,129.00 net for 2 modules/sections. Ihodpex Igwrjfx Adwst Product code: MPP001703 Height: 750 cm Depth: 217 cm Spacing: 100 cm Number of levels: 0 + 5 Load capacity per arm: 1,500 kg Height of I-beam profile cross-section: IPE 300 mm Net price: €2,429.00 net for 2 modules/sections. In addition, we have large quantities of storage racks from various companies, e.g. MECALUX, STOW, MAGO, BITO, SHAFER, WDX, SLP, DEXION PROMAG, etc., with high load capacity, available, undamaged, in very good technical condition, as well as comprehensive products for them, such as crossbars, mesh shelves, WEMA grates, bumpers, mounting anchors, etc. Of course, if you have your own transport, you can collect the goods from our warehouse in Chmielów 39-441 in Poland. * I have large quantities. * Transport possible throughout Europe. * Location: Poland

Condition: new, empty load weight: 2,980 kg, maximum load weight: 7,520 kg, overall weight: 10,500 kg, axle configuration: 2 axles, loading space length: 6,280 mm, loading space width: 2,480 mm, suspension: steel, tire size: 245 / 70 R 17,5, wheelbase: 990 mm, color: other, gearing type: other, front tire size: 245 / 70 R 17,5, rear tire size: 245 / 70 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, each ramp approx. 2,700 mm long x 560 mm wide, ramps with gratings, loading height: 840 mm, 12 lashing eyes each 2.5 t, 8 x lashing eyes each 6 t, steel drop sides, foldable and removable, wooden planks 50 mm, loading area rear beveled, loading area width inside 2.480 mm, rear stanchion removable, front for through-loading, , Also available in 5,300 mm loading area length! , , -- Misprints, errors and omissions excepted, sample pictures --, More data under: !, More Details: ! Iedpfox D Uu Ujx Adwjht

Condition: new, empty load weight: 2,980 kg, maximum load weight: 7,520 kg, overall weight: 10,500 kg, axle configuration: 2 axles, loading space length: 6,280 mm, loading space width: 2,480 mm, suspension: steel, tire size: 245 / 70 R 17,5, wheelbase: 990 mm, color: other, gearing type: other, front tire size: 245 / 70 R 17,5, rear tire size: 245 / 70 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, each ramp approx. 2,700 mm long x 560 mm wide, ramps with gratings, loading height: 840 mm, 12 lashing eyes each 2.5 t, 8 x lashing eyes each 6 t, steel drop sides, foldable and removable, wooden planks 50 mm, loading area rear beveled, loading area width inside 2.480 mm, rear stanchion removable, front for through-loading, , Also available in 5,300 mm loading area length!!!, , Rental price from 500 ¤ , , -- Misprints, errors and omissions excepted, sample pictures --, More data under: !, More Details: ! Ijdpjx D Urmsfx Adwjht

Condition: like new (used), functionality: fully functional, Autoclaves are used for the sterilization of packaged products that need to reach high temperatures (+100ºC) for the elimination or inactivation of pathogenic microorganisms. Ihodjx Tiliopfx Adwot Rotary autoclaves: These are used to sterilize products that present greater difficulties in heat transmission. Examples include vegetables in grains, grated or diced, and beverages such as milkshakes, teas, coffees, or evaporated milk. In this type, the basket rotates inside the autoclave, stirring the contents and preventing the pieces closest to the sides of the vessel from roasting. Distance between rollers:

Condition: new, Year of construction: 2025, functionality: fully functional, Blasting container for blasting with glass beads, ceramics, corundum, hard cast gravel, garnet sand, etc. Blasting container with full-surface screw conveyor floor and real blasting agent preparation. No sweeping, vacuuming and shoveling of abrasive in the blast room during the blasting of your workpieces thanks to our circulation system. Blast media cleaner air separator 4-fold adjustable air volume/ flow speed/ suction proximity to the blast media/ blast media layer height adjustment. Electric vibrating screen for permanent coarse separation. Bucket elevator with trapezoidal threaded spindle for belt tensioning and speed monitoring. Container lining with a 70shore 4mm fabric rubber for a service life of up to 30 years with proper use. Container can be opened completely to the side for easy forklift loading. Container can be upgraded with a crane overhead hatch, floor reinforcement, lateral blast room extension. When blasting stainless steel, the container can be upgraded with a real magnetic drawer or a magnetic drum separator as well as stainless steel grating. Filter system with easy maintenance doors, big bag dust bagging, H13/14 secondary filter and silencer. Blast pot with pressure regulator and water separator. The container is characterized by its reliability and easy maintenance. All system components are easily accessible at the rear of the container. Only 4 ball bearings on the screw conveyor floor and 4 ball bearings on the bucket elevator. Special warranty of 5 years on the essential parts of the blasting system included. Safety equipment: Door/gate limit switch, dead man's control, emergency lighting, blast room viewing window, emergency stop in the blast room and on the outside of the control cabinet, pressure vessel quick ventilation Ijdpfx Adjuwlzyswoht

Condition: new, Year of construction: 2025, Blasting container for blasting glass beads and ceramic balls with drum magnetic separator and stainless steel grating floor. Inner dimensions L=5850 W= 2300. Side Door Open for easy loading with the forklift. Ihodpfxog S Rt Tj Adwst

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, Fröling Turbomatic 110 KW Boiler We also have for sale: - 28 KW - 55 KW - Automatic ash removal into a separate ash container - Automatic ignition - Automatic grate shaker - Automatic grate shutoff - Chip burn-back prevention system - Safety heat exchanger cooling system - Two feed augers I have two such boilers available – on-site inspection and demonstration possible. Ihodsx H Tfajpfx Adwot Fully automated, maintenance-free boiler.

Condition: new, functionality: fully functional, Year of construction: 2025, CONSTMACH vibrating feeder bunkers are high-efficiency equipment designed to ensure continuous and balanced feeding of crushers in stone crushing and screening plants. These bunkers are placed in front of primary impact crushers or jaw crushers to ensure a homogeneous flow of material. This increases the capacity of the crushers, balances the loads on the intermediate crushers, and ensures continuity in the overall production line. The vibrating feeding system prevents sudden loads, eliminating the risk of overloading on conveyor belts and thermal damage to equipment. Thanks to CONSTMACH's special design, the vibrations in the bunkers are smooth and balanced. This ensures both a steady material flow and extended machine life. Otherwise, uneven feeding could cause serious wear on crusher hammers, conveyor belts, and bearings. Using a vibrating feeder bunker helps reduce maintenance costs, increase operational efficiency, and maintain long-term performance throughout the facility. Vibrating Feeder Bunker Technical Specifications Model: CPG - 09 Body Size: 2,500 x 520 mm Grid Size: 820 mm Motor Power: 2 x 3 kW Bunker Volume: 8 - 10 - 15 m³ Capacity: 80 - 100 t/h Weight: 8,000 kg Model: CPG - 10 Body Size: 3,000 x 850 mm Grating Size: 1,160 mm Motor Power: 2 x 4.5 kW Hopper Capacity: 10 - 15 - 20 m³ Capacity: 150 - 200 t/h Weight: 12,000 kg Model: CPG - 11 Body Dimensions: 4,600 x 1,100 mm Grate Dimensions: 1,400 mm Motor Power: 2 x 9.2 kW Bunker Volume: 15 - 20 - 30 m³ Capacity: 200 - 300 t/h Weight: 18,000 kg Model: CPG - 13 Body Size: 4,880 x 1,370 mm Grating Size: 1,840 mm Motor Power: 2 x 11 kW Bunker Volume: 30 - 45 - 50 m³ Capacity: 350 - 500 t/h Weight: 26,000 kg Ihsdpexpvkhjfx Adwjt Why Choose CONSTMACH Vibrating Feeder Bunkers? CONSTMACH is a trusted brand in the industry with years of engineering experience and high production standards. Our products stand out with their durable body structure, low maintenance requirements, and energy-efficient motor systems. Each one undergoes high-quality control processes to ensure long-lasting use. CONSTMACH Vibrating Feeders increase the performance of your crushing plant while minimizing your operating costs. If you are looking for quality, durability, and maximum efficiency, CONSTMACH is the right solution. What Do We Do at Constmach? Constmach is a leading machine manufacturer serving the construction and mining industries with a wide range of products. Our product portfolio includes concrete block making machines, stationary and mobile concrete plants, stone crushing machines, stone crushing and screening plants, sand washing machines, sand making machines, asphalt plants, conveyor belt systems, jaw crushers, and mobile crushing plants. With its high quality standards, innovative production approach, and customer-focused solutions, Constmach stands out as a reliable brand in both national and international markets. Our products continue to be the preferred choice of industry professionals due to their durability, efficiency, and long-lasting performance.

Condition: used, Year of construction: 2022, We offer a wide range of used and new pallet racking, high-bay racking, heavy-duty shelving, warehouse shelving, office shelving, archive shelving, and racking systems from various manufacturers. Frames / Uprights Height: 1.0 to 8.0 m Depth: 0.8 m to 1.1 m Load capacity per bay: 4,000 kg to 16,000 kg Various systems, manufacturers, and colours available Small parts included Beams / Crossbars Length: 1.8 m (2 pallet spaces) 2.7 m (3 pallet spaces) 3.6 m (4 pallet spaces) Custom designs / special lengths available Load capacity per pallet: 500 to 1,200 kg Load capacity per level / shelf: 1,000 kg to 4,800 kg Various systems, manufacturers, and colours available Small parts included We also offer a wide selection of accessories: Ihedpox H A A Ujfx Adwjt Column protectors / impact protection Push-through guards Wire mesh decking / grating Particle boards / chipboards Back mesh panels / fall protection grids Pallet support bars Drum supports Pallet pull-out units End frame protection Half-pallet supports And much more. We also provide direct delivery and installation services in Vienna and throughout Austria. Visit our website for more offers. We carry out independent racking inspections according to ÖNORM 15635, as well as assembly, dismantling, and company relocations throughout Austria. Additionally, we purchase your old, used racking systems—including damaged or rusty racks. Contact us today for a non-binding offer. Sample price for 1 beam: Prices depend on configuration, height, length, number of levels, and load capacities – simply send us an enquiry or give us a call.

Condition: like new (used), functionality: fully functional, empty load weight: 9,200 kg, maximum load weight: 28,800 kg, overall weight: 38,000 kg, axle configuration: 3 axles, first registration: 06/2020, loading space length: 11,600 mm, loading space width: 2,550 mm, loading space height: 850 mm, total length: 11,600 mm, suspension: air, tire size: 245.70 R 17.5, tire condition: 80 %, ground clearance: 850 mm, color: dark red, Year of construction: 2020, Equipment: ABS, tail-lift, Bertoja lowbed semi-trailer, 11.70m used, 3 axles with first axle liftable and third axle steering, air suspension, EBS, ride height control valve, 5-ton lashing rings on the sides and deck, wide double electro-hydraulic ramps with wood and grating surface, rear stabilizer legs, total length 11.70m, 8-meter loading platform, year 2020, like new, MOT valid until 30.04.2026 – Dealer INTERDRIVE SRL – Parma Iedpjx Nmwhjfx Adwjht

Condition: new, functionality: fully functional, type of input current: three-phase, sheet thickness (max.): 60 mm, kaitec Smart – CUTTING TECHNOLOGY BY PROFESSIONALS FOR PROFESSIONALS With the highly economical plasma process, material thicknesses of up to 25 mm can be cut optimally. Automatic initial height detection, automatic arc control, and intelligent collision protection ensure maximum quality and the highest possible repeatability. The automated program sequence and the long service life of the consumables help to actively and significantly minimize cutting costs. The oxy-fuel process also impresses with its ease of use and functionality. Thanks to the automatic piercing function, preheating times and the activation of cutting oxygen are controlled by CNC. This allows sheets up to 80 mm thick to be cut very cost-effectively. The oxy-fuel system is available for acetylene or propane and is equipped with automatic height control. kaitec Smart – WATER TABLE SYSTEM The foundation of the flatbed design is a stable water table. The longitudinal guide mechanism is mounted with high precision on milled surfaces. The sturdy cutting grate features offset, serrated support blades, providing optimal sheet metal support and reducing slag formation on the workpiece as well as excessive wear of the blades, which saves real money on rework and maintenance. The depth of the trough is precisely designed to accommodate slag and ensure effective cooling; it is easy to clean and captures the dust produced during cutting. Cutting area: 1,500 x 1,500 mm 1,500 x 3,000 mm 1,500 x 4,000 mm Plasma material thickness: 1–25 mm Oxy-fuel material thickness: 10–80 mm Price: Ihodpsx Ngn Tsfx Adwot Machine price depending on configuration, tailored to your requirements from €38,900 plus plasma unit, transport & installation We look forward to your inquiry!

Condition: new, functionality: fully functional, type of input current: three-phase, sheet thickness (max.): 50 mm, kaitec Easycut – PLASMA & OXYFUEL CUTTING PERFECTION FOR METAL & STEEL CONSTRUCTION Iedpfxsx Ngnye Adwjht The kaitec Easycut is a highly flexible CNC gantry cutting system, specifically developed for cutting material thicknesses between 1 and 50 mm. Thanks to its space-saving flatbed design, it is ideally suited for a wide range of applications. The double-sided driven machine gantry ensures exceptional cutting results through high rigidity and precise mechanical guidance. Available in three cutting area sizes, the kaitec Easycut can be tailored exactly to your sheet metal processing needs. It impresses with its great flexibility in the compact cutting machine segment. kaitec Easycut – WATER TABLE SYSTEM The robust water table forms the basis of the flatbed design. The precisely aligned longitudinal guides and the sturdy, serrated cutting grate reduce slag, protect the slats, and minimize maintenance costs. Optimized tank depth enables efficient slag collection and cooling. In addition, the system is easy to clean and reliably captures cutting dust. kaitec Easycut – PROFESSIONAL CUTTING TECHNOLOGY FOR PROFESSIONALS With its highly efficient plasma process, material thicknesses up to 25 mm can be cut precisely and cost-effectively. Automatic initial height sensing, arc voltage control, and intelligent collision protection ensure maximum quality and repeatability. The automated cutting process and long consumable life notably reduce operating costs. The oxyfuel process also impresses with straightforward handling and reliable functionality. The CNC-controlled piercing function optimizes preheating times and automatically regulates the oxygen supply, enabling sheets up to 50 mm to be cut efficiently. The oxyfuel system is available for acetylene or propane gas and features automatic height control for consistently precise cutting results. Cutting Area: 1,500 x 3,000 mm Material Thickness Plasma: 1-25 mm Material Thickness Oxyfuel: 10-50 mm Price: Machine price depending on equipment, tailored to your requirements from €29,900 plus plasma unit, transport & installation We look forward to hearing from you!