Used Grinding And Polishing Machine for sale (69,995)

Condition: excellent (used), grinding length 600 mm grinding width 300 mm workpiece height 350 mm magnetic clamping plate, electical 500 x 200 mm grinding wheel diameter 225 x 25 x 51 mm total power requirement 4 kW Djdpfx Asyyqt Ijgfocf weight of the machine ca. 2,1 t dimensions of the machine ca. 1,5x1,5x1,8 m

Condition: excellent (used), Drill Bit Grinding Machine Manufacturer: Schanbacher Model: S3-50 Grinding Range: S3-50 380 Volt Transport Dimensions: Width: 800 mm Depth: 450 mm Height: 1450 mm with pallet Dcodpfjyy S E Eox Agfjf Weight: 80 kg

Condition: new, neu ca. 2 Wochen ab Auftragse Italien 17940 € 344.45 € 350 mm 300 mm 500x160 mm 350x150 mm 300x150x55 mm Dcjdpfx Asywcl Regfof 2800 1/min 3,6 kW 1020 mm 820 mm 2170 mm 440 kg Dm. 200x78x78 mm This Grinding machine with fixed table derives from the model R.V. 500 but it differs from it as it is equippedwith a long column supported by four bearings and is opportunely stiffened by a sturdy column support. This Surface grinding machine, due to its stiffness and geometrical stability, is highly suitable for grinding with precision pieces of notable height: single or mass-produced die-shop components, moulds, punches, gears and others. Moreover, the nuts of the vertical translation screw and the dowels to realign the wheel motor to the axis,equipping this model of Grinding machine with fixed table, allow preserving perfect work conditions over the years, too. CAST IRON BED to maintain the geometric stability of the grinding machine in time, too. CAST IRON COLUMN, protected by bellows and supported by four adjustable precision bearings, broadly sized for this type of grinding machine with fixed table. Three-phase MOTOR air-cooled by double jacket, to prevent the overheating of the grinding machine motorduring continuous machining and to keep the temperature of the motor shaft and of bearings constant. Hardened, ground and dynamically balanced SHAFT, supported by precision ball bearings, widely sized for this type of grinding machine with fixed table and self-adjusting by means of springs for the backlash preload, to absorb thermal expansions. VERTICAL TRANSLATION SCREW supported by opposite and adjustable ball bearings, with apt motion for maintaining, in this model of grinding machine with fixed table, the wheel work field free from hindrances and for avoiding dust depositions. Metal BELLOWS for a better protection of the vertical translation screw of the grinding machine. Opposite bronze NUTS, for the recovery of the eventual wear in time of the vertical translation screw of the grinding machine with fixed table. REGISTRATION DOWELS to re-align the wheel motor of the grinding machine to the axis, obtaining parallel surfaces also in time. HANDWHEEL of the grinding machine, supported by three bearings and engaged on the screw by means of a pair of helical gears, equipped with graduated drum, supported by a trust bearing, for a stock removal of mm 0.01 - 0.02 - 0.03 for each single pass; the rapid feed per handwheel turn is mm 2. KNOB WITH JACK, for the programmable micrometric feed of mm 0.01 - 0.02 - 0.03 - 0.04 per pulse, which allows a simple use by avoiding the constant increment control. SLOT to permit the maximum use in height of the work field of the grinding machine wheel and to clamp non-magnetic parts and accessories such as: magnetic chuck, self-centering chuck and squares. Low-voltage CONTROLS, protection, indicator light and all requisites to comply with safety and conformity regulations provided for this type of grinding machine with fixed table. HANDLES, SHAPES AND SIZES of the grinding machine with fixed table designed to meet the current ergonomic recommendations for work. WITH FOLLOWING ACCESSORIES: Magnetic chuck 300 x 150 mm Wheel flange and cup wheel Semiautomatic dresser with diamond Coolant system Operating manual in German or Italian

Condition: good (used), Dumor Lightning Fold Pro 8335B+33KF Automatic Creasing and Folding Machine The machine is fully operational and ready to use. Manufactured in 2018. This is the most efficient creasing and folding system on the market, with a robust construction. High-stack vacuum feeding. Built-in vacuum and suction systems. Dodpfxsyur Axs Agfocf An instruction manual is included. The 7-inch color Smart Screen programmer allows for easy machine setup. Technical specifications: Paper thickness: 0.15-0.35 mm Feeder capacity: 100 mm Accuracy: +/- 0.5 mm Format range: 140×160 mm, 330×650 mm Paper type: coated, uncoated, laminated, UV varnished, photo Creasing blade width: 1.0 mm, 0.6 mm, and 1.4 mm Speed: 6300 sheets/hour (A4/1 fold) Number of creasing strokes per pass: up to 32 (creasing-only mode) Control: dual 7-inch touchscreen Predefined fold types: 7 types + custom folds Number of folds: 1 or 2 Folding method: folding knife Automatic paper length measurement: YES High-performance upper suction feeder: YES Patented breaker knife system: YES Creasing depth adjustment: YES Weight: 280 kg,

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, The machine is in very good mechanical condition and can be demonstrated under power. A selection of grinding pins, which can be used with the machine, can be selected and matched on site. The original operating manual and wiring diagram are available. Dsdpfx Agjyx Dqdefecf

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, We are selling a beautiful high-precision surface grinding machine from AMADA. The machine has low operating hours and is available for demonstration under power at the seller’s location. The machine’s enclosure has been completely renewed and it is in very well-maintained condition. Technical Data: Clamping surface: 550 x 200 mm Travel paths: 600 x 250 mm Height to spindle center: 90 to 400 mm Standard magnetic chuck size: 400 x 200 x 100 mm Grinding wheel size: 225 x 25 x 31.75 mm Dcsdpfoyx A Nfsx Agfof Grinding wheel speed: 500 – 5000 rpm Year of manufacture: Nov. 2016 Installation dimensions and weight: 2700 x 2400 x 1900 mm // Weight: 2400 kg Machine equipment: - FANUC Series 32i-Model B control - Machine enclosure (new) - Flanges - Dressing spindles (profile and groove grinding) - Belt filter - Integrated probe - Linear drive - Automatic balancing MPM - Ball screws and linear drive

Condition: used, Engraving Cutter Grinding Machine MBB - Maschinenfabrik Baden Baden Type FSS Serial No. 2861 Year of manufacture: 1987 Grinding wheel diameter: 100 mm Grinding wheel speed: 4,600 rpm Motor power: 0.25 kW Dodpfx Aoyxy S Rjgfjcf Power connection: 380 Volt, 50 Hz - Collet clamp device for collet 355E (saw thread M20x2 mm) - Including 3 collets Ø 0.5 - 6.0 - 17.0 mm - Maximum collet bore: 18 mm - Grinding wheel dressing device - Cup wheel Ø 100 mm - Operating manual Space required (L x W x H): 450 x 450 x 300 mm Weight: 32 kg Very good condition

Condition: used, DECKEL S11 universal tool & cutter grinder under power in our warehouse Dcedpfsphvlaox Agfof Mimu machine-tools (Italy)

Condition: new, grinding band dimension 150 x 2000 mm band speed 33 m/sec weight of the machine ca. 105 kg engine output 4 kW turning speeds 2800 U/min Accessories / equipment: - Vibration-free running smoothness - Adjustable working height - S1 motors with 100% duty cycle - Surface and contact grinding possible - Removable protective cover for surface grinding Dcjdpfx Aeyv N Agogfsf - Connection piece for double suction - Built according to the CE standard

Condition: new, width of the strips 150 mm band length 2000 mm band speed 16,5/33 m/sec total power requirement 2,6/3,37 kW turning speeds 1400/2800 U/min weight of the machine ca. 95 kg Equipment / Accessories: - Removable dust catcher - Fine adjustment of the band adjustment - Sanding belt - Eye protection - Motor protection switch - Operation manual - Sanding table - working height adjustment Dcedpfxjyv Nb Ns Agfef - surface grinding pad

Condition: new, neu ca. 2 Wochen ab Auftragse Italien 17940 € 344.45 € Dm. 200x78x78 mm 2800 1/min 300 mm 300x150x55 mm 350x150 mm 500x160 mm 3.6 kW 1020 mm 820 mm 2170 mm 440 kg This Grinding machine with fixed table derives from the model R.V. 500 but it differs from it as it is equippedwith a long column supported by four bearings and is opportunely stiffened by a sturdy column support. This Surface grinding machine, due to its stiffness and geometrical stability, is highly suitable for grinding with precision pieces of notable height: single or mass-produced die-shop components, moulds, punches, gears and others. Moreover, the nuts of the vertical translation screw and the dowels to realign the wheel motor to the axis,equipping this model of Grinding machine with fixed table, allow preserving perfect work conditions over the years, too. CAST IRON BED to maintain the geometric stability of the grinding machine in time, too. CAST IRON COLUMN, protected by bellows and supported by four adjustable precision bearings, broadly sized for this type of grinding machine with fixed table. Dcjdsyv Iqvepfx Agfjf Three-phase MOTOR air-cooled by double jacket, to prevent the overheating of the grinding machine motorduring continuous machining and to keep the temperature of the motor shaft and of bearings constant. Hardened, ground and dynamically balanced SHAFT, supported by precision ball bearings, widely sized for this type of grinding machine with fixed table and self-adjusting by means of springs for the backlash preload, to absorb thermal expansions. VERTICAL TRANSLATION SCREW supported by opposite and adjustable ball bearings, with apt motion for maintaining, in this model of grinding machine with fixed table, the wheel work field free from hindrances and for avoiding dust depositions. Metal BELLOWS for a better protection of the vertical translation screw of the grinding machine. Opposite bronze NUTS, for the recovery of the eventual wear in time of the vertical translation screw of the grinding machine with fixed table. REGISTRATION DOWELS to re-align the wheel motor of the grinding machine to the axis, obtaining parallel surfaces also in time. HANDWHEEL of the grinding machine, supported by three bearings and engaged on the screw by means of a pair of helical gears, equipped with graduated drum, supported by a trust bearing, for a stock removal of mm 0.01 - 0.02 - 0.03 for each single pass; the rapid feed per handwheel turn is mm 2. KNOB WITH JACK, for the programmable micrometric feed of mm 0.01 - 0.02 - 0.03 - 0.04 per pulse, which allows a simple use by avoiding the constant increment control. SLOT to permit the maximum use in height of the work field of the grinding machine wheel and to clamp non-magnetic parts and accessories such as: magnetic chuck, self-centering chuck and squares. Low-voltage CONTROLS, protection, indicator light and all requisites to comply with safety and conformity regulations provided for this type of grinding machine with fixed table. HANDLES, SHAPES AND SIZES of the grinding machine with fixed table designed to meet the current ergonomic recommendations for work. WITH FOLLOWING ACCESSORIES: Magnetic chuck 300 x 150 mm Wheel flange and cup wheel Semiautomatic dresser with diamond Coolant system Operating manual in German or Italian

Condition: excellent (used), Year of construction: 2013, KNUTH HFS 3063 VC - Hydraulic Surface Grinder Year: 2013 working area travel X-axis 765 mm travel Y-axis 340 mm workpiece weight (max.) 270 kg spindle axis-to-table surface distance 565 mm table dimensions 300x630 mm scale ring division Y-axis 0,02 mm scale ring division Z-axis 0,005 mm autom. transverse feed 0,1 - 8 mm autom. vertical feed 0,005 - 0,05 mm feed hydr. feed X 7 - 23 m/min rapid feed Y-axis 990 mm/min rapid feed Z-axis 460 mm/min drive capacity motor rating grinding spindle 5,5 kW motor rating servo drive 0,5 kW measures and weights grinding wheels dimensions 350x40x127 mm overall dimensions 2800x2200x1890 mm weight 2700 kg Features: - automatic transverse and longitudinal feed - rapid feed for setup to desired work height - adjustable roughing, finishing and spark-out strokes - hydraulic longitudinal table movement on Y-axis - double table V-guide in transverse table, V-guide and flat guides in longitudinal table - table guideways are hardened, ground and PTFE (polytetrafuorethylene) counter-laminated - ensuring maximum wear resistance - external hydraulic unit ensures high temperature stability - automatic central lubrication system Accessories/options: 2-axis digital readout system grinding wheel halogen lights operator manual coolant tank with dust extraction system Djdeyuvahjpfx Agfocf Under power in our warehouse!

Condition: ready for operation (used), - USED - SURFACE GRINDING MACHINE MAX GRINDING LENGTH: 1015 mm MAX GRINDING WIDTH: 405 mm MAX GRINDING HEIGTH: 350 mm MAGNETIC CHUCK: 400 x 1000 mm GRINDING WHEEL SIZE: 50 x 127 x 350 mm MOTOR POWER: 3,7 kW Djdpjh St Dqefx Agfecf WEIGHT: 3600 Kg OVERALL DIMENSIONS: 3500 x 1700 x 2000 mm ACCESSORIES: DRESSING TOOL

Condition: good (used), Year of construction: 2013, grinding diameter 140-355 mm grinding length 3000 mm centre height 260 mm weight of the machine ca. 8,3 t dimensions of the machine ca. 8500 x 3500 mm SA 6Ux3000 external cylindrical grinding machine Year of manufacture: 1981 Retrofit: 1 x 2013 SERWEMA Maximum grinding diameter with tailstock: 140 mm Dodpfoynmpyox Agfocf Maximum grinding diameter without tailstock: 355 mm Maximum grinding length: 3,000 mm Center height 260 mm Workpiece weight max. 500 kg Machine footprint 8500 x 3500 mm Machine weight 8500 kg

Condition: used, machine/vehicle number: 3401-1/33 18, This WMW surface grinding machine SFW is being auctioned in our industrial auction/bankruptcy machinery auction for MarGenius GmbH & Co. KG – machinery, tools, materials, and office equipment, conducted online. You will find this and many other lots on our platform. Dedpfx Ageyxdz Aofecf

Condition: used, Year of construction: 2019, Technical details: max. wheel diameter: 1000 mm gear width: 250 - 800 mm max. module: 15 Dsdpfx Aeywx Ihogfscf cycle time: 1017 h min. module: 20 max. table load: 4000 kg clamping diameter: 600 mm total power requirement: 80 KVA weight of the machine ca.: 20 t dimensions of the machine ca.: 5,0 x 6,5 x 3,7 m

Condition: new, Year of construction: 2026, A universal belt grinding machine for rough grinding and metal buffing. Suitable for various shapes and materials. The machine is by default equipped with a suction connector for extraction. 75×2000 mm grinding belt, powerful 3 kW motor. SM 75 model is additionally equipped with 2 belt speeds: 14,5 and 29 m/s. 2 rubberised wheels ensure good grip of the grinding belt. Machine features Universal area of application for edges, surfaces and round grinding Graphite coating on the surface for grinding surfaces increases the grinding belt's slippage Spring device ensures constant belt tension Easy and quick belt replacement Optimum grinding efficiency due to the high speed of the belt Can be quickly adjusted to horizontal or inclined grinding Universal area of application in iron working shops and industrial areas Large grinding surface with a protection guard Equipped with an additional precise adjustment of the belt inclination angle By default equipped with 2 belt speeds Technical data Wheel contact surface (H×W) 250×150 mm Grinding belt dimensions (L×W) 2000×75 mm Belt speed 14,5/29m/s Motor power 3 kW Weight 72 kg Dsdpfx Ajvu Uhaegfecf Dimensions (L×W×H) 1070 x 560 x 980 mm Warranty 12 months

Condition: refurbished (used), machine/vehicle number: 2257, Manufacturing origin France Voltage 380/50/3 Netweight 3000 kg Custom position 8460.29 20 Dimensions 2400x1550 mm TECHNICAL DATA Diameter capacity 80 mm Type 2HA : 120 mm Maximum infeed grinding length 200 mm Maximum throughfeed grinding length (with normal-type guides) 300 mm Grinding wheel : -diameter 400 mm -maximum width 200 mm -bore 203.2 mm Driving wheel : -diameter 254 mm -width 200 mm -bore 127 mm Main drive motor 11-22 kW Driving wheel motor 1,1 kW Driving wheel speed 10 – 200 U/Min Standard accessories : 1 flange with grinding wheel 1 flange with driving wheel 1 workpiece support bridge 1 set of shims for workpiece support -Hydraulic dressing and trueing device for grinding and driving wheels -Variable speed drive of driving wheel -Electrical equipment for 3x380 v, 50 Hz -Main drive motor, 11 kW -Ammeter for main drive motor Dsdpfx Agofnm Iiefjcf Starter keys and operating manual errors and omissions excepted data given without obligation.

Condition: good (used), Year of construction: 2006, functionality: fully functional, center height: 100 mm, workpiece weight (max.): 35 kg, grinding length: 500 mm, grinding diameter: 125 mm, overall weight: 1,800 kg, input voltage: 400 V, For sale: 1 used grinding machine. Manufacturer: Knuth Werkzeugmaschinen GmbH. Model: RSM 500. Year of manufacture: 2006. Technical data: Centre height: 100 mm; Max. grinding diameter: 125 mm; Distance between centres: 520 mm; Max. grinding length: 500 mm; Max. workpiece weight: 35 kg; Internal grinding diameter: 10 - 40 mm; Internal grinding depth: 50 mm; Spindle taper: MK4; Tailstock: MK2; Weight: 1,800 kg. Documentation available. The machine can be inspected at our warehouse in 09599 Freiberg. Dcsdpfx Agjxzrvwjfsf

Condition: used, Year of construction: 2022, Plus freight 4,000.00 € and installation and commissioning 5,000.00 € Grinding system B Sand 5 with partial lathe Working principle The panel is placed on the infeed table. It goes into the partial lathe and centered. It is ground in the grinding system, through and back. The panel is turned in the partial lathe. It is ground on the other side in the grinding system. Then there are two options: either the panel goes onto the outfeed table and unloaded or it comes back onto the infeed table and is unloaded there (the second option extends the working time). Grinding system equipment 1 upper grinding lamella roller suitable for surfaces. Power 3 kW; D 420 mm; L 1300 mm. Cross brush suitable for grinding the cross fibers. D 420 mm; L 300 mm. Power 1.1 kW. Cross brush suitable for grinding the cross fibers. D 420 mm; L 300 mm. Power 1.1 kW. 3 upper sanding discs for perfectly trimming the longitudinal and transverse wood fibers. Power 1.5 kW each; D 400 mm. Disc brush for beveling edges. The unit functions as a deep brush. After detecting the panel edges, it will follow the door edges. Power 0.75 kW; D 250 mm. Machine features: -The unique sanding system of this machine guarantees perfect wood sanding and/or intermediate sanding of the panels. -All tools are controlled by frequency converters. -All brushes are equipped with quick-release sanding strips without replacing the hub. -The discs are equipped with air bladders to optimize cleaning and service life. -Sanding discs are equipped with a Velcro fastening system. -The feed and rotation speed are PLC-controlled to prevent edge breakage. -High-quality sanding on 4 sides thanks to the system's constant removal rate. -Automatic and rapid unit changeover. - Constant throughput height, PLC and industrial software enable interlinking in a surface line. - Continuously variable speed of the discs, brushes and feed thanks to the fully equipped frequency converter. - Right/left rotation of the discs and brushes with different abrasive grits. - Individually driven feed of the discs, rollers and belts. - Additional adjustment of the brushes and discs to balance the use of the abrasive and to allow for changing the grinding pressure on the surfaces. - Strong support bed made of tubular steel guarantees the best rigidity, stability and flatness. - Planed upper support bed to ensure the best parallelism of the working surface for the grinding discs. - All unit carriages are designed with linear recirculating ball bearing guides, thus high load capacity and high precision. - Motorized feed belt controlled by a frequency converter, 0.55 kW. Machine doors equipped with safety devices. - Machine doors equipped with windows to observe the workpieces during operation. - Under the units, there are 80 mm rubber-coated pressure rollers to hold the workpieces in place during processing. · Low follow-up costs thanks to individual blade replacement. · Low running noise thanks to the enclosed system housing. · All units have suction housings with their respective suction supports. Cover plate with suction nozzle. · Completely encapsulated machine housing for a clean environment. Dsdpfovvkipsx Agfjcf

Condition: used, Year of construction: 2022, Oscillating cylinder grinding machine – technical specifications: A possible screwed version for spindle sleeve clamping. Something similar to the ProLoc device is used. Storage location: Nattheim. Dodjwhqprspfx Agfocf

Condition: used, Year of construction: 2022, Oscillating cylinder sanding machine, technical specifications: A possible screw variant for spindle sleeve clamping. Something similar to a ProLoc device is used. Storage location: Nattheim Dcodpswhqplsfx Agfsf

Condition: good (used), Please read the technical specifications carefully. If the machine is a potential investment for you, we kindly ask that you provide full identification with a correct telephone number and email address before we can issue an offer. LOG-O-MATIC (Mainaschaff/Germany) Surface Grinding Machine FS 5030 AH Year of manufacture: 4/1991 Grinding area: approx. 500 x 300 mm Dcsdexz R Niopfx Agfjf Automatic vertical feed Manual longitudinal, cross, and vertical feed Accessories/Features: - Electromagnetic chuck approx. 500 x 300 mm - Manual wheel dresser on the carrier - Paper band filter - Coolant system - Machine lamp - Machine feet Additional accessories: - Side-, angle-, and radius dressing device - Balancing scale - Demagnetizing plate The machine is in very good condition and comes from a training facility. Available from March 2026.

Condition: good (used), Year of construction: 2001, Machine-Details: Stock-No. 1022-2276 Type of machine Surface Grinding Machine - Vertical Make REFORM Type AR 42 Typ 19 CNC Year of manufacture 2001 Type of control CNC Storage location Monheim (Germany) Country of origin Germany Delivery time Immediately Freight basis Ex warehouse, loaded on truck Technical details: grinding length 4200 mm grinding width 1300 mm workpiece height 550 mm Control SIEMENS 840 D magnetic clamping plate 4200 x 1300 mm segment head diameter 1400 mm grinding motor turning speeds up to 320 U/min. grinding motor 306 kW weight of the machine ca. 50,0 t Additional information: Segment dimensions: 120/106 x 41 x 250 mm Number of segments: 1 set = 26 pieces Grinding motor feed: 0.5 - 35 m/min, infinitely variable Grinding motor feed: - in steps: 0.002 - 1 mm continuous: up to 5 mm/min. infinitely variable Equipment: * CNC-control SIEMENS Sinumerik 840 D * Automatic hydr. swivelling of the grinding motor from hollow to cross grinding * NC-controlled adjustment of the Marposs measuring head by means of precision support. - new grinding dimensions can be entered into the control, whereby the the grinding head automatically adjusts to the corresponding height. * Dresser with adjustment axis in the machine bed * Coolant system * Electro-magnetic table * Switch cabinet * Oil mist extraction * Documentation Dimensions (length x width x height) Bed: 11800x2200x1400 mm, weight 27500 kg Grinding head: 3000 x 2500 x 3100 mm, estimated weight 14 t 2 x Oil mist extraction: 1200 x 800 x 2000 mm each Control panel: 1200 x 800 x 400 mm Small control cabinet: 1400 x 1400 x 800 mm 2 x gears each 1200 x 800 x 500 mm Control cabinet: 1600 x 800 x 2000 mm Dedpfx Agsyx Duvofecf Control cabinet: 3400 x 600 x 2400 mm

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, Machine-Details: Stock-No. 1022-2424 Type of machine Surface Grinding Machine - Horizontal Make OKAMOTO Type ACC 64 CA-iQ Year of manufacture 2019 Type of control CNC Storage location Monheim (Germany) Country of origin Thailand Delivery time Immediately Freight basis Ex warehouse, loaded on truck Technical details: grinding length 600 mm grinding width 400 mm workpiece height 400 mm weight of the machine ca. 4,5 t dimensions of the machine ca. 3592 x 3519 x 2203 mm Additional information: Horizontal surface grinder in almost new condition Operating hours: CNC on: 1198 hours Machine on: 1117 hours Automatic operation: 509 hours Grinding operation: 228 hours Okamoto Touch Screen Control Travel X-axis: 600 mm Travel Y-axis: 22.5 – 497 mm Travel Z-axis: 400 mm Speed range rpm: 1-2800 (stepless) Rapid traverse mm/min: 4000 Main drive kW: 7.5 Maximum table load in kg: 1000 Accessories: Dsdpfxjyx Drhj Agfocf - Electro-permanent magnetic clamping plate: 400 x 600 P13 mm, height 80 mm (make Wagner) - 2 grinding wheel flanges - Table dresser - Automatic straight dresser, spindle box mounted - Automatic compensation of the wheel dressing amount - Automatic central lubrication - Ball screw in the Y and Z axes with AC servo motor and measuring system - Coolant system with belt filter system