Used Spring End Grinding Machine for sale (1,08,077)

Condition: used, Year of construction: 1980, functionality: fully functional, machine/vehicle number: D30L/7913, Offer Number: D30L/7913 Machinetype: spring end grinding machine Make: WAFIOS Type: FEL3 Constr. year: 1980 Crjdpfewi Szrex Abcsh wire diameter: 2-10 mm spring diameter: 120 mm legth of springs: 10 - 240 mm Location: In our warehouse

Condition: new, Year of construction: 2025, Clamp, cut off and surface grinding in one operation The machine has two grinding spindles working in parallel, one for cutting off and one for finishing the end face to the finished size The desired workpiece length is set to an accuracy of 1/100mm on the scale. To open the jig: Lever in the middle to the right: insert workpiece To close the jig: Lever to the left To cut: Lever up to the left To grind the surface: Lever down to the left To open the jig: Lever in the middle and to the right: remove the finished workpiece The grinding wheel can be adjusted and dressed at any time without losing the proper position. Version with motor protection, cover switch and restart protection. Without Fixing Holder: The machine is delivered with two rulers (300mm & 600mm). max. Length of workpiece, finished: 300mm or 600mm min. Length of workpiece, finished: 54mm Diameter of Workpiece: Ø1-25mm With Fixing Holder: max. Length of workpiece, finished: 60mm min. Length of workpiece, finished: 12,5mm Diameter of Workpiece: Ø1-10mm Ejector Pins with a Cylindrical Head: max. Size 6 max. Oversize of the Workpiece before processing: 195mm Codpfx Absid Iymecsrh Length Tolerance: +/-0,01mm Angularity: +/-0,01mm Weight: 92kg Dimensions without Scale Rod (LxWxH): 430x360x500mm Dimensions with Scale Rod (LxWxH): 1020x360x500mm Total Height (open Cover): 950mm Cutting Wheel, tissueless: SGA60P6BR1, Ø180x1xØ31,75mm Grinding Wheel: PA46, Ø100x50x10xØ20mm Location: Austria / Vienna Condition: New, Machine in Stock, 6 Month Warranty Delivery Time: 3 Weeks Including the following accessories: • 1 piece Cutting Wheel SGA60P6BR1 with Flange, mounted • 1 piece Grinding Wheel PA46 with Flange, mounted • 1 piece Diamond Dresser, mounted • 1 piece Belt, mounted • 2 piece Y-Spanner-Wrench • 1 piece each Allen Key 3mm, 5mm, 3/16“ • 1 piece Hex Wrench 6mm • 1 piece Scale Rod 300mm • 1 piece Scale Rod 600mm • 1 piece Caliper with Quill for Scale Rod • 1 piece Cleaning Brush • 1 piece Rod • 1 piece Manual, German • 1 piece Wooden Box

Condition: as good as new (ex-display), Year of construction: 2021, Because of CANCELLED PROJECT of the construction of a nuclear power plant, we are able to offer you.... NEVER USED - complete metal forming / processing plant (about 80 machines) Codpfxevlimls Abcsrh Please contact us for full machinery list and more photos. Thank you!

Condition: used, Cup grinder, swivel arm grinder, carbide chipbreaker groove grinder, tool grinder, grinding machine, angle grinder, lathe steel grinder -Clamping table: 440 x 300 mm -Max. Intermediate dimension: 130 mm -Grinding wheels diameter: 125 mm -Dimensions: 1200/840/H1680 mm Codecvnaiopfx Abcorh -Weight: 380 kg

Year of construction: 1960, condition: not inspected (used), Tungsten carbide chip flute grinding machine of the company Wendt type SS 50 Cedpfshaqxbjx Abcjrh

Condition: used, Year of construction: 1990, CYLINDRICAL GRINDING MACHINE GENDRON 500x2000 Crsdevv Sdzopfx Abceh

Condition: used, Tool grinding machine, grinding machine, angle grinder, turning steel grinding machine, steel grinding machine -Elysier grinding possible with the machine -Diamond grinding wheel Crodpfxedz U Tls Abceh -1x angle tables: 220 x 310 mm -Angle adjustment: +15° bis -5° -Oscillation: 0-35 mm -Water cooling with: electrolytes -Sanding dust extraction -Max. Steels cross section: mm -Number: 1x grinding machines available -Price: per piece -Dimensions: 850/700/H1400 mm -Weight: 580 kg

Condition: as good as new (ex-display), functionality: fully functional, Table size 540 x 250 mm Max table travel 560 x 260 mm Max distance from table to spindle center 450 mm Table slide-way Double-V rail Feed of cross handwheel, per revolution 5 mm Feed of cross handwheel, pe graduation 0,02 mm Feed of vertical handwheel per revolution 1,25 mm Feed of vertical handwheel per graduation 0,01 mm Wheel speed (50 Hz) 2850 rpm Wheel speed (60 Hz) 3440 rpm Wheel size 200x31,75x20 mm Power of spindle motor 1500 W Hydraulic station motor 1500 W Codpfx Absu Hzg Rscerh Working pressure 3 Mpa Max runoff 18 L/min Fuel tank capacity 80 L Coolant pump 40 W Machine's net weight 900 kg Size 1,80x1,40x1,80 m Robust and reliable construction. Zero working hours Price should remain the same till end of December.

Year of construction: 1998, condition: good (used), CHEVALIER FSG 1640 AD SURFACE GRINDING MACHINE MAKE CHEVALIER, MADE IN TAIWAN Credpsirfpgefx Abcsh MODEL FSG-1640 AD YEAR 1998 TABLE SIZE 1000 x 400 mm GRINDING WHEEL SIZE 445 mm TRAVERSES 400 x 1000 mm MAX HEIGHT FROM TABLE TO SPINDLE CENTRE 445.0 mm TOTAL POWER REQUIRMENT 7.4 kW PLUS AUTOMATIC DOWN FEED WHEEL-MOUNTED WHEEL DRESSER SYSTEM HYDRAULIC MOVEMENT COOLANT SYSTEM 400.0 x 1000.0 mm ELECTRO MAGNETIC CHUCK MACHINE MANUALS

Condition: new, Year of construction: 2024, functionality: fully functional, This powerful machine to meet the requirements of larger woodworking companies, ensuring exceptional sharpening results. Equipped with an electronic tooth counter and an autonomous cooling system. The ZM150 offers precise sharpening while maintainingoptimal operating conditions. With two electric motors, including a 150mm CBNdisk for sharpening and a motor reduction group for precise blade movement,this sharpener delivers outstanding performance. Power supply voltage - 380-400V Frequency - 50Hz Power - 0.20kVa Capacity - 65 teeth per min Blade width - 20 to 100 mm Tooth pitch - 6 -25mm Codpfoxiv Ugjx Abcjrh Sharpening disc - Profiled 150mm CBN disc Weight - 115kg

Condition: new, Year of construction: 2025, A superfine ball mill is a type of milling machine that is used to grind materials into very fine particles. This type of ball mill has some distinctive features that make it especially suitable for processing even the hardest materials with low contamination and minimal wear. It is commonly used in various industries, including pharmaceuticals, minerals, pigments, and chemicals, for producing micro powder or nanoparticles. Here are some key features and considerations for a superfine ball mill for micro powder: 1. High Grinding Efficiency: Superfine ball mills are designed to achieve high grinding efficiency by utilizing grinding media with a relatively small size, leading to a large surface area for grinding. Csdpfx Asq Nf Uwjbcsrh 2. Precision Control: These mills often come with advanced control systems to regulate parameters like rotation speed, temperature, and grinding time, allowing precise control over the particle size distribution. 3. Specialized Design: The mill is typically designed with features to minimize contamination, such as using materials resistant to wear and corrosion. Some mills also have cooling systems to prevent overheating during the milling process. 4. Variety of Materials: Superfine ball mills can handle a wide range of materials, including both brittle and fibrous substances. They are often used for milling hard materials that require fine grinding, such as ceramics, minerals, or pigments. 5. Size Reduction to Micro or Nano Level: The primary goal of a superfine ball mill is to reduce particle size to the micro or even nano level. This is achieved by the intense grinding action that occurs within the mill. 6. Classifier System: Some superfine ball mills incorporate a classifier system to control the particle size distribution more precisely. This allows for the separation of fine particles from coarser ones during the milling process. 7. Batch or Continuous Operation: Depending on the specific design, these mills can operate in either batch or continuous mode, offering flexibility based on the production requirements. 8. Safety Measures: Safety features may be included, such as monitoring and control systems to prevent overloading, overheating, or other potential issues during operation. When selecting a superfine ball mill for micro powder production, it's important to consider the specific requirements of your application, the characteristics of the materials you're working with, and the desired final particle size distribution. Always follow the manufacturer's guidelines for operation, maintenance, and safety to ensure optimal performance and longevity of the equipment.

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: MGB1320E, center height: 180 mm, workpiece weight (max.): 100 kg, grinding length: 500 mm, grinding wheel diameter: 400 mm, total width: 14,150 mm, total length: 18,000 mm, total height: 14,750 mm, grinding diameter: 320 mm, workpiece length between centers: 350 mm, grinding wheel width: 50 mm, spindle speed (max.): 3,000 rpm, feed length X-axis: 500 mm, feed length Z-axis: 150 mm, feed rate X-axis: 10 m/min, feed rate Z-axis: 1 m/min, overall weight: 2,100 kg, workpiece spindle speed (max.): 400 rpm, Equipment: rotational speed infinitely variable, Beijing Second Machine Tool Csdpfx Abstr Azkjcsrh Beijing Second Semi-automatic High Speed Cylindrical Grinding Machine MBS1320E On-line production equipment; test machine available; roundness within 0.001 beier machine tool works co ltd Online production equipment machine testing available The roundness within 0.001

Year of construction: 1995, condition: ready for operation (used), A defective CNC spring coiling machine BB Spring (Babbio) is available. Wire thickness range: 3mm-8mm, max. outer diameter: 120mm, wire processing speed: 90m/min, power: 35kW, machine dimensions X/Y/Z: approx. 2750mm/3150mm/2700mm, weight: approx. 4000kg. Including a winch plate for winching left springs and a torsion spring device. The motor and drive of the machine are defective. Documentation available. Credpsvripmsfx Abceh

Condition: ready for operation (used), Asahi - Seiki Manufacturing Co. Ltd. NSF-10 for producing extension / extended springs with english or german loops for wire diameters up to 1mm. Machine in very good condition, possible to buy with decoiler and setted for some springs. Csdpjr Izikjfx Abcjrh

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, machine/vehicle number: 14415, spindle speed (max.): 3,400 rpm, travel distance X-axis: 900 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 360 mm, grinding diameter: 400 mm, TECHNICAL DETAILS Travel distances X-axis travel: 900 mm Y-axis travel: 550 mm Z-axis travel: 360 mm Centre height: 950 mm Grinding diameter: 400 mm Table length: 790 mm Table width: 380 mm Maximum spindle speed: 3,400 rpm MACHINE DETAILS Control: Siemens SINUMERIK EQUIPMENT Crsdoxgdq Rjpfx Abcoh CE marking

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 10108, grinding wheel diameter: 100 mm, grinding length: 100 mm, center width: 100 mm, grinding spindle speed: 18,000 rpm, spindle speed (max.): 250 rpm, TECHNICAL DETAILS Grinding headstock Feed: X1 axes (CNC-controlled) Feed: Z1 axes (CNC-controlled) Grinding spindle (I) Feed: X2 axes (CNC-controlled) Feed: Z2 axes (CNC-controlled) Grinding spindle (II) Feed: X3 axes (CNC-controlled) Grinding spindle (I + II) Flange: Ø 52 mm Standard collar: Ø 32 mm Codpfx Ajxf Ak Tjbcsrh Lubrication: permanent grease lubrication Bearing seal: with sealing air Set air pressure: see chapter 5.3.1 Drive: 12 kW Speed control: with frequency converter Max. speed: 18,000 rpm Balancing: electronic Grinding wheel (grinding spindle I + II) Type: Borazon (CBN) ceramic bonded Diameter: Ø 100 mm Bore: Ø 32 mm Grinding wheel coating width: max. 20 mm Circumferential speed: max. 125 m/s Cam piece Workpiece rotation diameter: max. 80 mm Clamping length: max. 100 mm Grinding length: max. 100 mm Workpiece weight: max. 0.5 kg Workpiece spindle Design: fixed with integrated infeed/outfeed movement Stroke: 50 mm Workpiece spindle Dimensions: Ø 210 x 700 mm Flange: Ø 180 mm Standard collar: Ø 127 mm Lubrication: oil lubrication Set air pressure: see chapter 5.3.1 Drive: with servo motor, C1 axis (CNC-controlled) Speed max.: 250 rpm Tailstock Longitudinal adjustment: manual via gear Tailstock quill Live center: mounting hole Ø 20 mm Clamping force: adjustable via pneumatics Dimensions: 50 x 80 x 178 mm Lubrication: permanent grease lubrication Bearing seal: with sealing air Set air pressure: see chapter 5.3.1 Grinding stock Design: fixed Steady rest Type: GR - 115 Diameter range: Ø 45 - Ø 60 mm Set air pressure: see chapter 5.3.1 Profiling of the grinding wheel Fine dressing: circumference and face with diamond wheel, mounted on the dressing spindle Circumferential dressing: Ø 110 mm Dressing spindle Dimensions: Ø 80 x 250 mm Flange: Ø 100 mm Standard collar: Ø 75 mm Lubrication: permanent grease lubrication Bearing seal: with sealing air Set air pressure: see chapter 5.3.1 Drive: 5.3 kW Speed control: with frequency converter Max. speed: 30,000 rpm MACHINE DETAILS Installation dimensions: 8,935 x 5,956 x 3,437 mm Weight: 24 t Connection power: 87 kVA

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, center height: 225 mm, controller model: Fanuc 16T, TECHNICAL DETAILS Crjdpfx Aexlix Dsbcsh Centre height: 225 mm MACHINE DETAILS Control: Fanuc 16T

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, CNC UNIVERSAL GRINDER, STUDER – S145 CNC Manufacturer: Studer Model: S145 CNC Control: GE FANUC Series 16-T CNC Swing Diameter: - Over the workpiece: 350 mm - In front of the worktable: 455 mm Center Height: 175 mm Maximum Workpiece Length: 530 mm Axis Travels: - Longitudinal travel (Z-axis): 500 mm - Cross travel (X-axis): 120 mm Workhead (B-axis) Swivel Range: +/-30° Feed Rates: - X-axis (cross): 0.001–10,000 mm/min - Z-axis (longitudinal): 0.001–10,000 mm/min - C-axis (spindle, resolution): 0.0001° Grinding Wheel Head: - Swivel Range: 0–270° - Number of Spindle Positions: 4 Spindle Speeds: - Infinitely variable: 5,000–120,000 rpm (the machine is supplied with 3 spindles, max. 42,000 rpm) Workhead Spindle for Grinding Wheel: Csdpfew Dmxbex Abcjrh - Spindle speed: Infinitely variable from 1 to 1,000 rpm - Creep feed (hammer speed): 1–50 rpm - Spindle bore: Ø 50 mm - Spindle taper: ISO 50 - Spindle mount: CAMLOCK 6 Electrical Specifications: - Power supply: 50 Hz, 3 x 400 V - Workhead motor: 3.8 kW - Total connected load: 22 kVA Approx. Machine Weight: 5,700 kg Various Accessories: - B-axis increments: max. 0.001° - Electronic dressing device - In-process grinding monitoring - Thread grinding cycles - Coolant system with paper filter - Full enclosure - Machine lamp - Status indicator light - Automatic centering - 3 clamps, Ø mm - Electronic handwheel - RS232 serial interface - 1 external grinding spindle Other Information: THE MACHINE IS IN EXCELLENT CONDITION AND COMPLETE WITH ALL PARTS AND ACCESSORIES.

Condition: good (used), Year of construction: 2004, DGT Plus control system (Siemens basis) Sanding length 2400 mm Sanding width 1290 mm Sanding height 700 mm Magnetic table 2000 x 1100 mm Max. Table load capacity 5000 kg Grinding wheel width 150 mm Sanding spindle speed 960 rpm Machine weight approx. 30 tons Crsdpevg Sifefx Abceh

Condition: ready for operation (used), Year of construction: 2008, General Data Measurements width 1560 mm Measurements depth 2000 mm Measurements height 2100 mm Machine weight 3000 kg Control Unit Brand FANUC Model 31i-Model A Movement X-Axis Movement 220 mm X-Axis Rapid Traverse 20000 mm/min Z-Axis Movement 300 mm Z-Axis Rapid Traverse 20000 mm/min Additional Equipment Workpiece spindle motor: 2 kW Crsdpjxizhrefx Abcjh This VOUMARD VM 110 CNC T was manufactured in 2008. A robust internal grinding machine, it features a GE FANUC Series 31i-Model A control, a maximum grinding diameter of 150 mm, and a depth of 80 mm. It supports a longitudinal travel (Z-axis) of 300 mm and a cross travel (X-axis) of 220 mm. Consider the opportunity to buy this VOUMARD VM 110 CNC T internal grinding machine. Contact us for more information. Application Types Grinding

Condition: ready for operation (used), Cylindrical Grinder, Surface Grinder, Schaudt MAR/750, Used Machine Overall Dimensions: Length: 2600 mm Width: 1740 mm Height: 1700 mm Weight: 4500 kg Electrical Data: 400 V; 7.5 kW; 16 A Codpfjwhpdhex Abcjrh Grinding Specifications: Grinding Length: 750 mm Grinding Wheel Diameter: 500 mm Grinding Wheel Width: 90 mm Morse Taper: No. 4 Work Table Rotatable: ±10° Factory manual included.

Condition: like new (used), Year of construction: 2018, operating hours: 200 h, functionality: fully functional, Table dimensions 405 x 815 mm Magnetic table 400 x 800 mm Table travel length/cross 830 / 450 mm Distance between spindle center and table surface 580 mm Grinding wheel dimensions 350 x 40 x 127 mm Csdpfoxlcmnex Abcjrh Motor power 4.0 kW Weight 3400 kgs Equipment, Accessories - Siemens PLC controller with touch screen - 2-axis digital readout system - Hardened and ground bed guides - Automatic infeed - Hydraulic oil tank cooler - Electric magnetic table with demagnetization - Flange-mounted grinding wheel - Built-in diamond dressing unit - Grinding wheel balancing stand - Balancing mandrel - Coolant system - Halogen lamp - Machine feet - Magnetic chip separator - Machine manuals The machine is in original condition and barely used (approx. 100-200 hours). No defects. It is being sold due to company closing.

Condition: ready for operation (used), Year of construction: 1991, functionality: fully functional, machine/vehicle number: 26BB2444, No minimum price – guaranteed sale to the highest bidder! MACHINE DETAILS Electrical Data Connection: 380 V / 50 Hz Rated power: 10 kVA Fuse rating: 25 A Control voltage (AC): 220 VAC Control voltage (DC): 24 VDC Cedpfx Abexliwyjcerh EQUIPMENT Coolant tank

Condition: like new (used), Year of construction: 2011, functionality: fully functional, year of last overhaul: 2024, 3 AXIS CNC CYLINDRICAL GRINDER Make: Lizzini Model: Sirio 6 CNC CNC: Siemens 840D FULL RETROFIT : YEAR 2011 Center height: 150 mm Max grinding length: 600 mm Crsdpfst Hr A Usx Abceh Max grinding diameter: 290 mm Max weight allowed between centers: 120 kg X (Transversal) Axis travel: 330 mm Z (Longitudinal) Axis travel: 750 mm Max grinding wheel size: 508 x 80 x 203.2 mm Other info: The machine is in excellent condition and is complete in all its parts and accessories

Year of construction: 2020, condition: ready for operation (used), Main Drive Spindle speed range 2810 rpm Spindle motor power 115 kW (1564 HP) Movement Crjdpfxexg Ulfs Abcjh X-Axis Movement 285 Z-Axis Movement 1150 This STUDER favorit CNC was manufactured in 2020. It features a center distance of 650 mm or 1000 mm, center height of 175 mm, and can handle workpieces up to 120 kg. Equipped with a FANUC Oi-TD CNC control system, it offers precise X-axis and Z-axis movements. Ideal for high precision grinding with a maximum grinding diameter of 350 mm and length of 650 mm. Contact us for more information about this machine. Application Types Grinding