Used Polishing And Buffing Machine for sale (69,318)

Condition: ready for operation (used), Year of construction: 2012, operating hours: 5,000 h, functionality: fully functional, 1.1 Technical data: 1.1.1 Diameter of work-piece – mm– 1500 1.1.2 Height of work-piece – Fodeymwxpspfx Adasfw mm– 2800 1.1.3 Weight of work-piece (max)/ kg 2000 (at that maximum distance between the axes of castings is 1650 mm) 1.1.4 Energy demand 1.1.4.1 Electrical -Turbines – (8 pcs. х 22 kW– кВт) kW– 176 - Bucket elevator – (2 pcs. х 7,5 kW– кВт) kW– 15 - Rotation device of casting – (2 pcs.. х 0,75 kW– кВт) kW 1,5 - Double magnet drum-separator – (2 pcs.–шт. х 1,5 kW) kW 3 - Vibrating conveyor and sieve – (2 pcs. х 4 kW– кВт) kW– 8 - Dust aspiration – kW– 22 - Conveyor path – kW– 7,5 1.1.4.2 Compressed air demand – - pressure – bar 6 - quantity – m3/h 35 1.1.5 Abrasive charge – kg 8000 1.1.6 Projected productivity is 18-25 loads per hour (quantity of loads depends on the duration of cleaning chosen by operator and on chosen regime of work – finishing or rough treatment; thus, producer ensures productivity under performance specification not less than 22 castings per hour while descaling after normalization, annealing, as well as oxides, slag blanket, welded areas while finishing. – 1.2 Units of machine (given for each element separately) – 1.2.1 Machine house - Material of welded house – ST 54, thickness 16 mm - Wear plate material in house – manganese, thickness – 16 mm 1.2.2 Bucket elevator – (2 pcs. per machine) - Load capacity of 1 pc. – m3/h– 40 1.2.3 Shot material cleaner – (2 pcs. per machine) - Aspiration volume of 1 pc. – m3/h 2500 - Capacity of 1 pc. – t/h– 120 1.2.4 Double magnet drum-separator – Diameter mm– 300 1.2.5 Dosing bulk – (2 pcs. per machine) - Volume of 1 pc. – m3 0,7 - Dosing valve pneumatics (different for under and overhead turbines) – 1.2.6 Turbines – Турбины (8 pcs. per machine ) - number piece 8 - type ABR-501 - diameter– диаметр mm– 500 - wheel rotations/min 1/min– 2600 - motor power kW– кВт 22 - abrasive capacity kg/min/each– 350 1.2.7 Conveyor-path - Load capacity per length kg/m– 3000 1.2.8 Movable trolley– (12 pcs.) - Load capacity ton 2 - Distance between the axes of hangers max 1650 mm 1.2.9 Dust aspiration - Air to be aspirated m3h 25000 - Filter tip APSZ 24 - Cartridge surface m2 504 - Fan motor power kW 22 1.2.10 Electrical box - mains voltage V 3 x 400 - control voltage V 24 - frequency Hz 50 1.2.11 Vibrating sieve load capacity – (2 pcs. per machine) t/hour 140

Condition: ready for operation (used), Year of construction: 2012, operating hours: 5,000 h, functionality: fully functional, 1.1 Technical data: 1.1.1 Diameter of work-piece – mm– 1500 1.1.2 Height of work-piece – mm– 2800 1.1.3 Weight of work-piece (max)/ kg 2000 (at that maximum distance between the axes of castings is 1650 mm) 1.1.4 Energy demand 1.1.4.1 Electrical -Turbines – (8 pcs. х 22 kW– кВт) kW– 176 - Bucket elevator – (2 pcs. х 7,5 kW– кВт) kW– 15 - Rotation device of casting – (2 pcs.. х 0,75 kW– кВт) kW 1,5 - Double magnet drum-separator – (2 pcs.–шт. х 1,5 kW) kW 3 - Vibrating conveyor and sieve – (2 pcs. х 4 kW– кВт) kW– 8 - Dust aspiration – kW– 22 - Conveyor path – kW– 7,5 1.1.4.2 Compressed air demand – - pressure – bar 6 - quantity – m3/h 35 1.1.5 Abrasive charge – kg 8000 1.1.6 Projected productivity is 18-25 loads per hour (quantity of loads depends on the duration of cleaning chosen by operator and on chosen regime of work – finishing or rough treatment; thus, producer ensures productivity under performance specification not less than 22 castings per hour while descaling after normalization, annealing, as well as oxides, slag blanket, welded areas while finishing. – 1.2 Units of machine (given for each element separately) – 1.2.1 Machine house - Material of welded house – ST 54, thickness 16 mm - Wear plate material in house – manganese, thickness – 16 mm 1.2.2 Bucket elevator – (2 pcs. per machine) - Load capacity of 1 pc. – m3/h– 40 1.2.3 Shot material cleaner – (2 pcs. per machine) - Aspiration volume of 1 pc. – m3/h 2500 - Capacity of 1 pc. – t/h– 120 1.2.4 Double magnet drum-separator – Diameter mm– 300 1.2.5 Dosing bulk – (2 pcs. per machine) - Volume of 1 pc. – m3 0,7 - Dosing valve pneumatics (different for under and overhead turbines) – 1.2.6 Turbines – Турбины (8 pcs. per machine ) - number piece 8 - type ABR-501 - diameter– диаметр mm– 500 - wheel rotations/min 1/min– 2600 - motor power kW– кВт 22 - abrasive capacity kg/min/each– 350 1.2.7 Conveyor-path - Load capacity per length kg/m– 3000 1.2.8 Movable trolley– (12 pcs.) - Load capacity ton 2 - Distance between the axes of hangers max 1650 mm 1.2.9 Dust aspiration - Air to be aspirated m3h 25000 - Filter tip APSZ 24 - Cartridge surface m2 504 - Fan motor power kW 22 1.2.10 Electrical box Fjdpfx Adoymww Seajfw - mains voltage V 3 x 400 - control voltage V 24 - frequency Hz 50 1.2.11 Vibrating sieve load capacity – (2 pcs. per machine) t/hour 140

Condition: good (used), SPM Vibro Polishing Machine Model LPG - EVO - MAG (UP1) With Allen Bradley Touchscreen Control TECHNICAL DATA- Machine Power Supply Voltage VAC 400. Filtering Unit Power Supply Voltage VAC 230. Total Installed Electrical Power A 22 - 32. Power Supply Frequency Hz 50-60. Main Air Supply Pressure 6 bar. Pinch Valves Air Supply Circuit Pressure 2-3,5 bar. Diaphragm Valves Air Supply Circuit Pressure 6 bar. Compressed Air Supply Fitting G 3/8. Mains Water Supply Pressure 2 bar. Mains Water Supply Fitting G 3/4. Box Vibration Motor Power 4kW. Washing Unit Vibration Motor Power 3,2 + 3,2kW. Vacuum Power 4kW. Box Load Capacity 600kg. Box Dimensions W620 x D620 x 730mm. Washing Unit Capacity 315 Litres. Washing Unit Load Capacity (Polishing Media) 1,500kg. Delivery Pump Flow Rate L/s 0÷52 l/min (3,1 m³/h). Discharge Pump Flow Rate L/s 0÷52 l/min (3,1 m³/h). Vacuum Weight 170kg. Vacuum Dimensions W1,130 x D600 x H1,530mm. Total Machine Weight 2,400kg. Machine Overall Dimensions Without Cabin W2,310 x D1,500 x H1,750mm. Total Cabin Weight 600kg. Machine Overall Dimensions With Cabin W3,200 x D1,900 x H1,910mm. Fjdpfoyilv Eex Adaofw With Soundproof Cabin, Pneumatic Loading Door, Polishing Fluid Filtration Tank, Clean Fluid Tank, Used Fluid Tank, Flexible Hose For Manual Suction & Signal Tower.

Condition: new, Year of construction: 2025, Standing seam metal roof machine F3 with length measuring device was designed by our company to produce standing seam roofing panels for the installation of roofs and facades of various buildings and structures. Sheet metal blanks are passed through the forming rolls of the machine to get the desired shape of the standing seam panel. This method of production allows you to produce panels with a speed of about 10 meters per minute and fit any roofing companies. Bfywfrix The machine is equipped with an easy width adjustment system, so it takes just a few minutes to readjust it from rolling one width to another. The F3 machine can work with panels from 200 to 700 mm wide. Fedpoh Aw Rnsfx Adasfw It is possible to work with metal sheets and coils made of galvanized steel, copper, zinc, aluminum, stainless steel, etc. Maximum metal thickness for work – 0.8 mm. Standing seam metal roof machine F3 can go in a standard set, and with additional accessories providing additional functionality of the machine and simplifying the work process. As additional options, we offer a floor decoiler, which can be used directly on the working site thanks to its lightweight and small size, so you can put the coil to the decoiler and feed it to the machine. As an optional extra, you can purchase a length-measuring device to roll roofing panels the same length and in semi-automatic mode, without marking them with tape and ruler. Using those accessories, you can really save your time and make your work more accurate. With the length measuring device, our customers very often buy a cross cutting knife in order to cut the panels of the desired length from the coil. As extra options, we also offer ribbed panels rolls to form standing seam panels with ribs and providing additional roofing system rigidity. You can use the machine with or without rolls. Extra rolls for radius panels production allow you to produce panels with a big bending radius, which allows you to use them for various structures, such as hangars, etc. We have a ready-made solution for your business for hangars roofing buildings production. For protection against various damages, we offer the use of a top cover, which prevents foreign objects from getting inside the machine and makes the working process of the machine safer - roll forming roof panel machine F3 with top cover For closing the standing seam lock our customers can use special standing seam roofing tools While installing roof panels, roofers use special fixation elements – sliding clips, so we offer punching presses for their production - sliding clip formers Thus, using a standing seam metal roof machine F3, our customers and partners can produce efficient standing seam roofing panels, and with additional accessories can make this process more convenient and faster.

Condition: excellent (used), Knuth-Rotor 2 grinder, grinding machine, lapping machine Voltage: 220 V Power: 150 W Polishing disc (ø): 200 mm Space requirement: 700 mm x 560 x 240 cm. (L x W x H). You are welcome to take a look. Fodpfx Adjvb H Dgsajfw We will be happy to arrange a cost-effective shipping company to arrange for you!

Condition: excellent (used), Year of construction: 1978, functionality: fully functional, Marka / Menşei: Diag Kolb ( Alman ) Model Yılı: 1978 Teknik Özellikler: İşleme Boyu: Ø800 mm x 5000 mm Hareketli Tabla Uzunluğu: 7800 mm Zemin Sabit Banko Uzunluğu: 12.250 mm Kızak Genişliği: 550 mm Bağlanabilen Taş Ölçüsü: 760 x 80 x 304 mm Tezgahın orijinal kitapçığı vardır. Genel Durum: Ağır sanayiye uygun, sağlam gövdeli klasik Alman tezgahı Uzun boy silindir taşlamaya elverişli Mekanik yapısı güçlü, yıllara meydan okuyan bir makine Fjdpfx Aeyl T Scodaefw Detaylı bilgi, yerinde görme ve fiyat görüşmesi için iletişime geçebilirsiniz.

Condition: excellent (used), Year of construction: 1981, operating hours: 50,000 h, functionality: fully functional, This listing is for a WESERO Rubber Buffing Machine, manufactured in Germany in 1981. The machine is designed for rubber processing applications and features a robust construction typical of industrial equipment from this period. The overall dimensions of the machine are 1700 mm in length, 2900 mm in width, and 1600 mm in height, making it a substantial piece of equipment suitable for a production environment. Fsdpfx Adeyqx Tieajfw

Condition: ready for operation (used), Year of construction: 2019, HEUFT ONE: Metal Detection and Code Verification Conveyor System Model Heuft HBBNXZ72 YOM 2019 High sensitivity to ferrous and non-ferrous metals Stainless Steel Construction Full Container Checking System (A4) The devices of the new HEUFT ONE series set new standards in terms of detection accuracy, operational reliability and price / performance ratio during an in-line quality inspection in a confined space, and celebrated their world premiere at interpack. The first metal detector and an inspection system for markings up to HEUFT standards can be experienced live at the trade fair. ONE for all: the new products make an affordable introduction to HEUFT cutting edge technology as particularly compact stand-alone devices which are extremely easy to integrate into packaging lines. They combine innovative detection technologies with customised hardware and software and proven procedures for a highly precise product tracking, inspection and fault rejection. Thus the compact complete solutions remove contaminated products and incorrectly marked packaging accurately; food safety has priority! Fjdjyq Rkyopfx Adasfw The HEUFT ONE for detecting metal achieves maximum detection accuracy with unique evaluation procedures from the HEUFT development department: it even finds minute pieces of metal in filled food packaging reliably – almost unaffected by the product effect of saline or acidic products and the influence of metal packaging components. Even special ambient conditions such as a "metal free zone" are not necessary for the reliable operation of the compact stand-alone device. The first HEUFT metal detector complements the portfolio of sophisticated systems, which identify all types of foreign objects, with a slim entry-level solution. It is ideal for all those who only wish to find objects made of iron, steel, aluminium or stainless steel first and want to achieve a detection and rejection reliability up to HEUFT standards. The new HEUFT ONE for code verification, marking and dress inspection also provides this during the high-resolution complete examination of food packaging with in-house developed colour sensor camera technology and real-time image evaluation. It detects best before and expiry dates, barcodes and 2D codes, article and serial numbers, imprints and lettering which have been incorrectly applied and are inaccurate as regards content – and that independent of their respective position. The same also applies to deviating logos as well as non-brand colouring and design elements. Proven HEUFT procedures also ensure the accurate removal of incorrectly marked products in this case. Full traceability, clear information about shelf-life and digestibility as well as an attractive appearance at the point of sale are thus always guaranteed. The solid, extremely compact construction in accordance with the hygiene-optimised HEUFT CleanDesign also makes the new HEUFT ONE devices stand out. They are straightforward to integrate into existing packaging lines even where space is limited. The HEUFT ISI bus ensures minimum wiring with the open, flexible assembly directly above the conveyor. Dispensing with change parts makes easy brand changes without mechanical changeovers possible and the organised user interface, which has been reduced to the essentials, ensures error-free operation. This together with continuous monitoring brings the metal detection and code verification in line with HEUFT standards.

Condition: excellent (used), Catalogue number 7843 TECHNICAL DATA - Table dimensions: 2050x350mm - Table dimensions with support: 2050x940mm - Min. workpiece length: 120mm - Min. workpiece width: 90mm - Workpiece thickness range: 10-45mm - Edge width range: 12-48mm - Edge thickness range: 0.4-3mm - Feed speed: 6.4m/min - Power consumption: 2.3kW - Required air pressure: 0.7 Mpa - Spindle speed: 10,000 rpm - Extraction connector: 2x100mm - Heating power: 1250W - Dimensions (L/W/H): 2400x1300x1130mm - Weight: 360kg ADVANTAGES – Unpainted – With polisher – Used machine, in very good condition Net price: 12,000 PLN Net price: 2,860 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (In case of significant exchange rate fluctuations, the price may change) Fsdex A Dt Dopfx Adaofw

Condition: good (used), Code: 0308 Brand: AGLA Model: 900 Roll polishing machine for polyester and varnish - It is suitable for buffing of high gloss polyester or polyurethane paints, metals, marble and similar materials Sturdy structure Table dimensions mm 2950 x 850 Working width mm 900 Working height mm 700 Brush diameter mm 300 Motor Hp 10 Fsdpfxjympwqs Adaefw Automatic table lifting Overall dimensions mm 3100 x 1750 x 1650 h

Condition: ready for operation (used), - invoersysteem voor plat- en hoekstaal Ffsdpewlkw Dofx Adajw - met toevoerwagen en materiaalklem - Vacon 110 software CNC-besturing Hydraulische schaar voor vlak staal VPS 2200 cap: 220 ton maximale lengte: 15 200 mm breedte/dikte: 500/25 mm hoek: +/- 45° Hydraulische hoekschaar voor staal VHS 2400 cap: 240 ton maximale lengte: 15 200 mm 200 x 200 mm / 16 mm Hydraulisch ponsen VPO 1000 cap: 100 ton ponsdiameter/dikte: 57/15 mm of 32/25 mm 4 ponsunits voor vlak staal (Verticale positie) 1 ponseenheid voor hoekstaal (horizontale positie) incl. gereedschap Hydraulische teller VNI 1/36 1 codeerschijf 36 tekens tekenhoogte x diepte: 10 x 1 mm Hydraulisch aggregaat VHA 37 37 kW - 250 bar

Condition: used, turning speeds 450 / 700 / 1.400 U/min transmission ratio 3 output 0,2 / 0,5 / 0,6 kW Fedsym D Abepfx Adaofw current 0,6 / 1,0 / 1,1 A table surface area 540 x 390 mm 0 380 V / 50 Hz chuck RÖHM / 165 mm Brush diameter 235 mm dimensions 0,80 x 0,44 x 1,13 mm Brushing Machine HAHN & KOLB - UVM Type 2 - incl. braking system

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 4650x2230x2135 mm Fedpfx Aovz Epuedaofw Weight 5800 kg Total power requirement 19,8 kw

Condition: used, Rotary vibratory finishing machine WALTHER TROWAL type CLS-980 SA Com. No. 15.207 Year of construction 1972 Trough diameter 1850 mm Total outer height of trough approx. 1150 mm Working hopper / gross volume max. 980 liters Useful volume approx. 490 liters Largest possible workpiece diameter approx. 300 mm (measured diagonally) Screen area 3400 cm2 Infinitely variable speed 1000 to 1700 rpm Motor power 22 kW Mains connection 400 Volt, 50 Hz - Switch-on time manually and via timer - Infinitely variable motor speed via DANFOSS drive controller type VLT 3032 (frequency converter) - Manually adjustable eccentric unbalance weights - Container with rubber lining - sound-insulated lid with pneumatic lid opening - Manual separating flap - built-in sieve separator after the separating flap - liquid inlet - Material outlet opening 470 x 300 mm - Control cabinet and drive controller for wall mounting - Bulkhead cover with perforated sieve - 1 box of pyramid grinding media Space requirement L x W x H 3000 x 3000 x 2550 mm Ffjdpfx Asdzqn Djdasw Transport dimensions L x W x H 2300 x 3000 x 2550 mm dead weight 2500 kg good condition Functional description: Workpieces and grinding wheels are set in motion by the vibrations generated and circulated extremely gently. The constant relative movement between the workpieces and the grinding wheel causes deburring and surface finishing of the workpieces.

Condition: used, Double-sided grinding and polishing stand MEYER type SMP Machine. No. 848 Year of construction 1963 shaft diameter 50 mm grinding wheel support Ø 305 mm wheel distance 1470 mm grinding- polishing wheel diameter max. 800 mm working height 550 mm speed 710 / 800 / 950 rpm. Drive power 2x 3 kW mains connection 380 Volt, 50 Hz. - two drive motors for each working side separately - star-delta switch for each drive motor separately - speed change by shifting the drive belts - dust exhaust flange Ø 100 mm Ffsdpfx Aodzqmhjdaew - mounted are 2 pieces corundum grinding wheels with 40 mm width, Ø ca.560 / 480 mm space requirement L x W x H 1700 x 1200 x 900 mm weight 850 kg good condition

Condition: ready for operation (used), Year of construction: 2013, Brand: HAKO Model: Scrubmaster B650 Year of manufacture: 2013 Capacity: 3200 m²/h Ffsdpsytb Arjfx Adaow Scrubbing width: 65 cm Drive: 24V Clean water tank: 72L Dirty water tank: 74L Internal charger, 220 volts. At FLITS Rental & Sales you choose speed, clarity, and reliability. We think along with you, respond immediately, and ensure you quickly have the right machine. Do you have questions or would you like a non-binding quote? Please feel free to contact us:

Condition: good (used), Code: 0118 Brand: DE STEFANI Model: MV Automatic polishing machine for edges for polishing polyester, polyurethane and other paints Features: Track drive system with rubberized skids Manual upper presser with rubberized wheels Adjustable support bar for wide pieces Composition: 1° Group - N° 2 adjustable brushes - Motor Hp 4 2° Group - N° 1 Brush - Motor Hp 2 Working surface height mm 870 Feed speed 5 to 25 mt/min Working length min mm 150 Ffodpfewiv Dksx Adaow Working height min/max mm 10/100 Working width min 50 Protection cabin Electrical cabinet Overall dimensions mm 2700 x 1000 x 1250 h Weight kg 1500

Condition: used, Year of construction: 2013, machine/vehicle number: 15513, Polishing machine Gottschild HBS 1600-750-100-1(2) The Gottschild grinding and polishing machine offers a wide range of applications, from the production of high gloss furniture fronts, glass panels to Corian • grinding and polishing. • Easy change between grinding and polishing head • with sinusoidal tool head oscillation, for an even better uniform high- gloss surface which satisfies even the highest demands. • with automatic part detection (machine only designed for rectangular parts) Technical data: • Type: HBS 1600-750-100-1 • Year of manufacture 2013 • Electrical connection 400V, 50 Hz, 4,5 kW, 10 A • Compressed air 6 bar connection adjusted to 5 bar • Conveyor belt 1.600 mm x 940 mm • part width: 90mm- 750mm (without tool brigde 850mm) • part length: 150 mm - 2.800mm • part heights 8-100 mm (extended working height) • Frame size 1600 mm x 1200 mm • Rack height approx. 960 mm ± 25 mm • Frame material welded steel tube • Support for superstructure aluminum profiles • Belt cleaning manual every 8 hours • Safety devices emergency stop. • The machine has to be shielded by protective walls if the machine is delivered without housing. • Polishing motor 400V, 50 Hz, 0,75 kW with planetary gearbox • Control Siemens/Vipa S7 PLC, parameters via KEB Touch Panel • Frequency converter KEB • Control elements control ON/OFF, RESET, START/STOP, program interruption, grinding head speed, oscillation speed and belt speed • Tool bridge: Tool bridge with polishing head, consisting of a linear profile system, driven by linear cylinder. • Without polishing disk for the polishing head Ffedpfx Adju Afu Dsaow Location: on stock

Condition: excellent (used), Continuous rotary table HAU R60 - 1800, with 60 workpiece spindles, mounted in a pitch circle diameter of 1800mm, 3 polishing units with 7,5 kW each, polishing shaft diameter of 50 mm, width of polishing wheel 2 x max. 400 mm and 1 x 280 mm, diameter of polishing wheel s max. 420 mm, motorized longitudinal and height adjustment of polishing units, machine equipped with liquid compound feeding system More pictures on demand Fedpjm Nbubjfx Adasfw

Condition: reconditioned (used), Round table polishing machine make Bula, model MP81 for sale. Continuously turning machine for polishing, brushing, grinding and deburring a wide variety of workpieces. 6 workpiece holders mounted in a pitch circle of 250 mm. 1 processing station, drive power 2.2 kW, with Bula Quick Lock system of the polishing wheels. Polishing shaft diameter 25 mm The machine has been completely overhauled, machine body sandblasted, primed, repainted, new bearings, new motors, new gearbox, new V-belts, new handwheels, new pulleys, completely new control cabinet, and all drives are controlled by frequency converters. Fjdpfx Aelccvmjdaofw Subject to prior sale. Optionally, the system could also be supplied with a polishing paste system - liquid, consisting of 1 high-pressure dosing pistol WIDOBERG HDP-2, brackets, timer, etc. and pressure container.

Condition: reconditioned (used), functionality: fully functional, BULA MP133 - Rotary table polishing machine make Bula, model MP 133 for sale Continuously revolving machine for polishing, brushing, grinding and deburring a wide variety of workpieces. Ffjdowvq Ahopfx Adaow 8 workpiece holders mounted in a pitch circle of 600 mm. 3 processing stations, drive power per station from 4 KW, with Bula Quick Lock system of the polishing discs. Polishing shaft diameter 30 mm für BULA QuickLock Max. disc width 150 mm Max. disc diameter: 350 mm Base area approx. 1900 mm wide, approx. 2400 mm deep, 1700 mm high The machine is completely reconditioned, cleaned, sandblasted, primed and repainted. The BULA MP136 was equipped with new engines, a new gearbox and a new control cabinet. All drives are infinitely variable via frequency converters. Furthermore, the following has been renewed: bearings, belts, screws, hoods, etc. The machine is available immediately. Further technical details and price on request. Subject to prior sale. Optionally, the system could also be supplied with a polishing paste system - liquid, consisting of 3 high-pressure dosing pistols WIDOBERG HDP-2, brackets, timer, etc. and pressure tank). Picture is just an example !

Condition: excellent (used), Year of construction: 2014, Polishing Machine for Furniture Fronts – Emme Elle Model 1350 For sale: Industrial polishing and buffing machine by Emme Elle, model 1350, ideal for furniture manufacturing plants, joineries, and spray shops. The machine is designed for the automatic processing and finishing of furniture fronts, lacquered panels, polyurethane coatings, and other surfaces, ensuring a smooth, even, and high-quality finish. — 📌 Key Product Features • Manufacturer: Emme Elle – a renowned brand in the Italian and European woodworking machinery sector. • Model: 1350 – working width up to 1350 mm, ideal for furniture fronts and large panels. • Condition: negotiable (used, in working order) – detailed information available upon request. • CE compliance: yes. — 🛠️ Technical Specifications • Working width: approx. 1350 mm – suitable for wide fronts and panels. • Table dimensions: approx. 1350 × 3200 mm. • Polishing components: – 4 rotating shafts with Ø 350 mm cotton discs, – 4 polishing drums Ø 180 mm. • Wax distribution system: automatic module for the application of polish/wax compound. • Motors: multimotor configuration ensuring power and stable operation. • Suction/de-dusting system: efficient extraction unit for dust and debris, improving finish quality. — ✅ Applications The machine is dedicated to polishing and finishing furniture fronts, lacquered and veneered panels in production lines. Suitable for: • joinery and furniture manufacturing plants, • spray shops and finishing departments, • serial production as well as individual elements. Fjdpfx Aeyk Dfwedaofw It ensures uniform, high-quality surface finishes, reducing operator time and increasing production efficiency.

Condition: ready for operation (used), Year of construction: 2001, ROTER BERG – Polishing Stand Fsdpfxeyng A Hj Adasfw - Infinitely variable speed control 200 – 1100 rpm - Automatic brake - Chuck diameter 200 mm with interchangeable jaws - Center height 300 mm - Drive power 0.75 kW - Connection cable Dimensions: LxWxH 0.6x0.5x0.4 meters / Weight: 95 kg Subject to errors and input mistakes.

Condition: used, machine/vehicle number: HR6-1000, Used rotary indexing table polishing machine HR6-1200 Manufacturer: Hau Rotary indexing table with 6 working spindles and 3 polishing stations equipped with high-pressure guns, 5.5 kW motors, Pneumatic clamping with Schunk PZN 100 clamping grippers, Schunk distributor. Control cabinet. Ffsdoyntrhjpfx Adasw Three rotary table polishing machines are available.

Condition: new, Year of construction: 2021, Table polishing machine / flat polishing machine for parts up to 3000mm length. With one or two polishing units. Basic machine and control cabinet new, polishing units used but completely overhauled with new polishing motor. Ffedeg D Rfmspfx Adasw