Used Gripper for sale (714)

Condition: new, Year of construction: 2026, functionality: fully functional, position of the milling head: mittig, spindle speed (max.): 60,000 rpm, total height: 1,550 mm, total length: 1,870 mm, total width: 1,040 mm, rotational speed (max.): 60,000 rpm, type of input current: three-phase, overall weight: 560 kg, working range: 420 mm, warranty duration: 12 months, drive type: Linearmotor, Equipment: rotational speed infinitely variable, Semi-automatic depaneling / basic machine with parallel shuttle The dynamic depaneling machine LOW 4322 RD is especially suited for medium to high product volumes and meets growing demands in the production process. Printed circuit board blanks of various materials are separated using low-dust and low-stress sawing and milling techniques with maximum product flexibility, precision and throughput. Highly dynamic linear motor axes, tools and grippers meet the highest quality requirements and guarantee the depaneling machine a long service life and high reliability. Semiautomatic depaneling - solutions on demand The LOW 4322 RD depanelling machine enables fast product changeover while maintaining short depanelling and handling times. The blank printed circuit board is inserted with a parallel shuttle, picked up and fixed with pin clamping technology and, if necessary, in combination with vacuum suction cups. Made in Germany Bodsxt Dk Ropfx Ak Howl The machine is equipped with: - a shank and slice tool separation module on Z-axis (automatically rotatable 0-90) - X-Y cross table module in linear motor technology with high-resolution measuring system - 2-compartment loading module built as parallel shuttle, separated left and right with sliding doors - profil frame with two maintenance doors - left and right. ESD - standard vision system base module for teach-in programming - Working area is 420 x 330mm - Automatic cutter length processing - Remote maintenance/support via remote connection - Touch IPC with Windows 10 Pro operating system - Laser axis measurement incl. protocol - Air ionization - Cutter breakage control for end mills only - Preparation for vacuum clamping technology - disc and sliding doors ESD conform Optionally a vacuum cleaner unit can be offered later.

Condition: good (used), Year of construction: 2006, TECHNICAL DATA Main drive Speed: Infinitely programmable: 18`000 rpm In set-up mode: 20 - 800 rpm Work spindle: Hollow shank taper: HSK-A63 Tool clamping: Hydraulic Feed drive Linear motor: X-axis AC servomotors: C, B, Y, Z Feed speed X, Y, Z: Up to 20`000 mm/min Rapid traverse Y, Z: 50 m/min X: 80 m/min B: 40 rpm C: 50 rpm Position measuring system Resolution: C, B, X, Y, Z: 0.001 mm Position tolerance: C, B, X, Y, Z: 0.010 mm Working range X-axis: 500 mm Y-axis: 450 mm Z-axis: 400 mm B-axis: 0° to 161.955 ° Bodpfsu Hkb Rsx Ak Howl C-axis: n x 360 ° Tool changer with double gripper Magazine slots: 120 Max. Tool diameter without free spaces: 80 Max. Tool diameter with free spaces: 130 Max. Tool length from spindle nose: 300 mm Max. Tool weight: 6 kg NC rotary table with swivel axis C-axis: Clamping surface rotary axis (mm): 500 x 380 mm Distance of T-slots / size: 63 / 14 H7 Centering bore: 30 H6 Max. Torque: 1491 Nm Max. Rotation of the table top: 50 rpm B-axis: Max. Swivel torque: 1864 Nm Swivel speed: 40 rpm Swivel range: 0° - 161.955 ° Input and display precision: 0.001 ° Weight: 420 kg Max. load: 200 kg Weight: Approx. 6800 kg Installation weight: Approx. 7500 kg Dimensions: 4170 x 3133 x 2560 mm SCOPE OF OFFER U.A: (list not exhaustive): Deckel Maho DMU 50 Evo CNC machining center Heidenhain iTNC 530 Tool breakage control Blum measuring probe Oil mist separator Fire extinguishing system High-pressure pump and belt filter system Chip conveyor Exact scope of supply according to photo gallery We assume no liability for the accuracy, completeness and up-to-dateness of the information provided

Condition: excellent (used), Year of construction: 2011, TECHNICAL DATA Bedpfx Akowv Hnmo Hjwl Linear Axes (Slides X, Y, Z) Travel distances: Axis X: 250 mm Axis Y: 200 mm Axis Z: 300 mm Rapid traverse (X, Y, Z): 30 m/min Feed force (X, Y, Z): 3700 N Resolution (X, Y, Z): 0.0001 mm Rotary Motion of Motor Spindle – Axis B Rotary travel range: -15° to +100° Rotary travel range (with tailstock): Tailstock in position: -20° to +45° Tailstock removed: -20° to +90° Maximum speed: 20 rpm Drive torque: 750 Nm Hydraulic clamping: 50 bar Holding torque: 300 Nm Resolution: 0.0001 mm Milling Motor Spindle HSK E40 Power at 100% duty cycle: 10 kW Power at 25% duty cycle: 15 kW Nominal torque (100%): 8 Nm Nominal torque (25%): 12 Nm Speed range: 50 – 30,000 rpm Axis A (Bar capacity Ø 40 mm) Spindle type: A4 Max. bar diameter: 40 mm Max. speed: 35 rpm Drive torque (nominal): 112 Nm Drive torque (max.): 238 Nm Resolution: 0.0001° Axis clamping (Axis A): Pressure: 70 bar Holding torque: 130 Nm Tool Changer Number of tool discs: 2 Positions per disc: 24 Max. tool weight: 1 kg Rotational speed: 60 rpm Max. tool diameter (adjacent positions occupied): 50 mm Max. tool diameter (adjacent positions free): 63 mm Max. tool length (from spindle nose): 95 mm Coulisse de Reprise Travel distance: 80 mm Feed force: 1700 N Tilting moment: 90 Nm Resolution: 0.0001° Hydraulic pressure for tilting motion: 100 bar Workpiece Manipulator Pneumatic vertical slide gate: Ø 25 mm Stroke: 710 mm Linear travel per motor revolution: 70.4 mm/rev Max. transfer speed: 60 m/min Max. workpiece weight: 5 kg Max. manipulator stroke: 1120 mm (2×560 mm) Max. vertical travel: 150 mm Part pick-up Ø/length: Ø 32 mm / 100 mm Part ejection Ø/length: Ø 32 mm / 100 mm Accuracy: +/- 0.05 mm Grip force: 45 N (at 6 bar) Max. gripper opening: 14 mm (2×7 mm) Pneumatic Equipment Operating pressure: 6 bar Hydraulic System Operating pressure: 95 – 105 bar Coolant System Coolant tank volume: 80 liters Chip pan volume: 30 liters Kinematic viscosity in operation: 10 – 15 cSt SCOPE OF DELIVERY Includes (not limited to): Willemin Macodel W 408 B machining center Extraction unit Fire suppression system Probe Coolant system Oil chiller Data backup Complete operator documentation Exact scope of delivery as per photo gallery No guarantee is given for the correctness, completeness, or currentness of the information provided.

Condition: excellent (used), Professional industrial robot from the renowned manufacturer SHINI, designed for automation of production processes – mainly for removing parts from injection molds and handling components. The device is used in the plastics processing industry (injection molding machines), ensuring fast and repeatable work cycles, increasing production efficiency. The robot is equipped with a handheld controller (teach pendant), allowing for programming of movements as well as automatic mode. Technical data: • Manufacturer: SHINI Plastics Technologies • Model: S-530-V-2KM7-CE • Year of manufacture: 2017 • Power supply: 230V (single phase) • Frequency: 50 Hz • Power: 30 W • Payload / Application: robot for light-duty applications (parts removal from molds) • Arm reach: approx. 550 mm • Pneumatic gripper (operating pressure: 2–10 bar) • Manual control + AUTO mode • Complete wiring • Weight: approx. 62 kg Equipment included: • SHINI robot • Handheld controller (teach pendant) • Pneumatic gripper • Cables and installation • Documentation (visible in photos) Condition: Used – normal signs of use. Technically sound and ready for operation. Additional information: • Sold exactly as shown in the photos Bjdpfx Ajy Duzqsk Hewl • Inspection before purchase possible • Pallet shipping available Applications: • Injection molding machines • Production automation • Part removal • Pick & place operations

Condition: used, Year of construction: 1998, x-travel 500 mm y-travel 420 mm Bwjdpfx Asw Inrvsk Hel z-travel 500 mm spindle taper SK 40 table surface area 700 x 400 mm table load capacity 800 kg control Heidenhain TNC 426 rated capacity 40 kVA voltage 400 V weight of the machine ca. 6,5 t dimensions of the machine ca. 3,4 x 3,7 x 2,9 m DECKEL-MAHO machining centres are suitable for manual and automatic operation. --> Area of application MILLING: --> DRILLING: --> Face milling --> Face countersinking --> Circular milling --> Circular drilling --> Screw milling --> Screw drilling --> Gear milling --> Profile drilling --> Profile milling --> Form drilling --> Form milling --> Including vertical tool changer with double gripper --> Tool magazine, variable space coding (VPC): --> Number of tools: 20 --> Standard tool - max. Ø: 90 mm --> Special tool - max. Ø with free neighbouring spaces: 140 mm --> Max. tool length from spindle nose: 300 mm --> Max. tool weight: 12 kg

Condition: good (used), functionality: unexamined, total height: 6,500 mm, total length: 12,300 mm, load capacity: 8,000 kg, FOR SALE: KONE Industrial Overhead Crane (8,000 kg / 8 t) Professional-grade overhead bridge crane from Finnish manufacturer KONE. The crane is dismantled and ready for transport. Excellent choice for industrial halls, machine shops, or heavy-duty maintenance applications. Technical Specifications: Brand: KONE Lifting Capacity: 8,000 kg (8 Tons) Year of Manufacture: 1983 Crane No: K 8461 Span: 12.3 meters Lifting Height: 6.3 meters Power Supply: 3N ~ 50Hz, 380 V Speeds: Main Hoist: 5 / 1.6 m/min Trolley Travel: 24 / 8 m/min Bridge Travel: 32 / 10 m/min Maintenance & Condition: Wire Ropes: Replaced on 21.02.2011 (Serviced by Konecranes). Rope type 6X36-FC, 14 mm diameter, 39 m length. Condition: Used in a professional environment with a regular maintenance log. Sold as-is. Included: Bridge beam, trolley, control cabinet, and the lifting accessories (magnets/grippers) shown in the photos. Bjdpfx Akjy Ix Ens Hjwl

Condition: used, Year of construction: 2014, Approx. 97 million prints Format: 94 x 64 cm (37 x 25 inches) installed in 2015 short-term available Technical data: PQC-S control console with touchscreen KOMORI KHS-AI system for makeready time optimization KOMORI Smart Feedback for density adjustment and waste reduction Automatic washing and ink presetting KOMORI PSP automatic format and thickness adjustment AMR (Automatic Make Ready) for preset job changes Quick start function for production Remote control of register and transfer cylinder adjustment Automatic sheet format adjustment Pneumatic stop fingers Mechanical and ultrasonic double sheet detection in the feeder S-APC: semi-automatic plate change (no plate bending required) KOMORI DSC high-performance sheet guide with exclusively double-size countercylinder and transfer cylinders KOMORImatic film dampening unit technotrans alpha.c dampening system Antistatic blower at the feeder head Side blower (feeder) 2-zone suction belt delivery table Delivery with sheet troller/smoother Sheet brake with infinitely variable speed adjustment Bwodpfx Akjxb U Ays Hel Blowing bars above the delivery pile Antistatic bar above the delivery pile Adjustable fans for precise paper travel and pile formation Weko AP160 printing powder device KOMORI PDC LII, online density measurement KOMORI PCC CIP3/4 data conversion software Max. sheet format: 640 × 940 mm Min. sheet format: 297 × 420 mm Max. print format: 620 × 930 mm Plate format: 700 × 945 mm (thickness: 0.30 mm) Blanket size: 800 × 955 mm (with bars) Substrate thickness: 0.04–0.6 mm Gripper margin: 10 mm Plate clamping margin: 45 mm Max. printing speed: 13,000 sheets/hour Stack height feed: 800 mm Stack height at delivery: 900 mm (*depending on paper, ink, and operating conditions) Length: approx. 8,169 mm Width: approx. 3,320 mm (without peripheral devices) Power consumption: approx. 53 kW / 50 Hz (without peripheral devices)

Condition: ready for operation (used), Year of construction: 2022, operating hours: 1,316 h, travel distance X-axis: 550 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 510 mm, controller manufacturer: SIEMENS, controller model: Sinumerik 828D, total height: 2,840 mm, table load: 600 kg, overall weight: 5,600 kg, spindle speed (max.): 12,000 rpm, tool weight: 8,000 g, number of axes: 3, This 3-axis DMG MORI M1 PRO was manufactured in 2022. It features a robust inline spindle with a speed range of 20-12000 rpm and a 24-position automatic tool changer. The worktable supports up to 600 kg with dimensions of 850 × 650 mm. Additional highlights include a Renishaw PP40 probe, 20 bar coolant system, and LED lighting. Ideal for precision machining tasks. Contact us for more information about this machine. Additional equipment • Job Shop package • Renishaw PP40 wireless workpiece probe • TS27R tool measurement probe • Scraper-type chip conveyor • Coolant tank capacity: 200 L (left side) • Coolant pump: 20 bar internal through-spindle coolant • Machine enclosure roof • LED work area lighting Machine Benefits • Table size: 850 × 650 mm • 24-position automatic tool changer with double gripper • Voltage: 3 × 400V Extra Information • The machine is in fully functional condition • Tested and confirmed by DMG service report, including accuracy measurements • Complete documentation is available • Currently disconnected from power Bwodpex D Nigjfx Ak Hjl Dimensions Machine Depth 3065 mm Technical Specification Taper Size SK 40 Through-spindle Coolant Yes

Condition: used, machine/vehicle number: 008402, Max. panel width: 4300 mm Max. panel length: 2500 mm Main saw blade projection: 110 mm No of Rip saw Grippers: 9 No of Cross Cut Grippers: 4 Bwjdpfsygtbmjx Ak Hel

Condition: good (used), Year of construction: 2008, functionality: fully functional, The Depo/ZPS machining center features an overhead gantry, meaning that all machine movements are performed by the tool. As a result, the mass of the workpiece and clamping device remains constant during machining. Year of manufacture: 2008 Spindle hours approx. 3,500 h (after spindle replacement in 2023) Control system: - Heidenhain iTNC 530 - Heidenhain HR 410 handwheel - Swiveling control panel with 15.1" monitor - Integrated Ethernet interface Technical Data Travel ranges: X 1,000 mm, Y 900 mm, Z 600 mm Work table: Bwsdpjy Hp Rrofx Ak Hjl - 1,200 mm x 1,000 mm - Max. workpiece weight: 3,000 kg - Max. workpiece size: 1,000 mm x 800 mm x 700 mm Milling spindle: - Continuous power: 30 kW - Speed range: 1-18,000 rpm - Torque S1/100%: 80 Nm - Tool holder: HSK 63 form A - Main spindle jacket cooling - Air through spindle center for tool cooling (ILZ) - Coolant with 40 bar through the spindle (IKZ) Axes feed rates: - X, Y, Z axis feed up to 40 m/min - X, Y, Z axis rapid traverse up to 40 m/min Tool changer with double-arm gripper: - Number of tools in drum magazine (outside working area): 38 - Max. tool diameter: 80/115 mm - Max. tool length: 250 mm Tool and workpiece measurement for automatic tool and part size adjustment: - Tool radius and length measurement - Tool breakage detection - Blum laser for component measurement (Inspect) Disposal system: - Gooseneck slat conveyor - (Chip cart to be provided by buyer) Additional equipment: - Minimum quantity lubrication Minibooster 2 - Machine enclosure with full-area protective covers - Crane loading possible by unhooking the chip protection device at the front - Workspace lighting with two fluorescent lamps on the side walls Machine data: - Space requirement including service areas (LxWxH): approx. 5,000 mm x 4,220 mm x 3,830 mm - Machine weight incl. additional units: approx. 13,000 kg - Connected load: 45 kVA, 400V, 50 Hz This machining center is located in a precision tool and mold making shop. It is exceptionally well-equipped with practical features and is in very good condition. The Depo/ZPS Dynamic 1009 operates precisely and reliably. There is no maintenance or repair backlog.

Condition: used, machine/vehicle number: 008409, Max. panel width: 4400 mm Max. panel length: 2200 mm Bjdpfx Ajygta Ask Hswl Main saw blade projection: 120 mm No of Grippers: 10

Condition: excellent (used), Year of manufacture: 2018 Reach: 1300 mm Payload: 10 kg Robot weight: 28.9 kg Repeatability: ±0.1 mm Gripper: Schunk RH 907 Force sensor joint: AXIA80-ZC22 Software for controlling the above-mentioned devices and cameras (cameras not available) Control: handheld terminal + control cabinet Table not included Bwjdpfowtp Tmex Ak Hjl

Condition: excellent (used), Reach: 850 mm Payload: 5 kg Robot weight: 18.4 kg Protection class: IP54 Included: - Touchscreen tablet Bwjdpfowtp Tyjx Ak Hsl - Robot arm - Robot controller QUANTITY: 2 ROBOTS, PRICE PER UNIT Year: 2018 Reach: 850 mm Payload: 5 kg Robot weight: 18.5 kg Number of axes: 6 Gripper: included Control: touchscreen tablet + controller The price includes only the robot arm with the controller and control cabinet, excluding any additional equipment shown in the photos.

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, NAKAMURA-TOME SC-100X2 Technical Specifications L-Spindle (Main Spindle): Bar capacity Ø51 mm / 6,000 rpm R-Spindle (Sub Spindle): Bar capacity Ø42 mm / 6,000 rpm Bedpfx Akoy A Exke Hjwl Machine Features: Two tools in cut (simultaneous machining with two tools) Lower turret + 2-axis machining on R-spindle Easy-to-use Superimposed Cycle Standard Equipment: Milling and Y-axis are standard L-spindle motor: 11 / 7.5 kW R-spindle motor: 7.5 / 5.5 kW Milling motor: 7.1 / 2.2 kW / max. speed 6,000 rpm Lower turret equipped with manual unloading gripper Lubrication oil recovery system (standard specification) Environment-friendly inverter-type hydraulic unit

Condition: as good as new (ex-display), Year of construction: 2021, HYDRA 20 Cobot Palletizer – Demonstration Machine: Cobot palletizing system for stacking packages onto transport pallets. Condition: Demonstration machine (lightly used) Fully automatic palletizing system HYDRA 20 Cobot Palletizer: 👉 Up to 20 kg payload 👉 Up to 2.2 m palletizing height → Collaborative robot DOOSAN ROBOTICS Cobot H2017 → Robot base and control elements → Pallet frame for 2 Euro pallets, incl. sensors → FJM vacuum gripper with aluminum plate and 6 suction cups → Vacuum generation via ejector with external compressed air Bsdpfx Akoy Iz Tno Hjwl → FJM palletizing software, incl. PC, mounting console & touch screen A detailed description and pricing information for the palletizing system with a 20 kg payload is available in the attached PDF! ❗ For logistical reasons, delivery is limited to the DACH region and countries bordering Austria. HYDRA Cobot Palletizer by FJ Mayer GmbH Developed and programmed by Franz Josef Mayer GmbH Austria. © Franz Josef Mayer GmbH 2021

Condition: used, machine/vehicle number: 008502, Max. panel width: 3800 mm Max. panel length: 3800 mm Main saw blade projection: 110 mm No of Grippers: 11 Bsdpfx Aey Edp Hjk Hswl

Condition: used, machine/vehicle number: 006006, Max. panel width: 2300 mm Max. panel length: 4300 mm Main saw blade projection: 135 mm No of Rip saw Grippers: 7 No of Cross Cut Grippers: 20 Second flexible pusher: yes Bwedpfxju Rv Uqj Ak Hol Panel Rotation Station: yes

Condition: used, Year of construction: 2017, controller manufacturer: Heidenhain, controller model: TNC 640, _____ Description: Year of manuf. : 2017 Control : Heidenhain TNC 640 Speed : 5000 rpm Movement X/Y/Z : 4500/1800/1300 mm In General: Year of manufacture:2017 Bwsdpfx Asy Eu Tvok Hol Control system:Heidenhain TNC 640 Travel range X/Y/Z:4,500/1,800/1,300 mm Spindle speed:5,000 rpm Tool holder:SK 50 Milling head (spindle): Technology:Diagonal head with gear spindle Index:0.001° Speed:5,000 rpm Tool holder:SK 50 Max. power:43 kW Max. torque:1,045 Nm Coolant supply:Coolant + blast air Working table: Clamping surface:6,000 x 1,100 mm T-slots:6 x 22H12, spacing 140 mm Tool magazin: Technology:Chain magazine Number of stations:40 Tool changer:Double gripper (horizontal/vertical) Max. tool diameter:125 (250) mm Max. tool length:400 mm Equipment: Position measurement systems:Direct scales Chip removal:Chip conveyor Coolant supply:Internal coolant system with filter, 20 bar Workpiece measurement:Funk M&H probe Set-up operation:HR 510 electronic handwheel Software option:Adaptive Control

Condition: ready for operation (used), Year of construction: 2018, Robot arm manufactured in 2018. This Hyundai Hi 5a-S features 16 simultaneous controlled axes, offering advanced programming and playback capabilities. It includes a full digital servo system and a user-friendly teach pendant with a 7" color TFT-LCD touch panel. The machine comes with a special gripper and a robust support podium. If you are looking to get high-quality automation capabilities, consider the Hyundai Hi 5a-S robot arm we have for sale. Contact us for further details. • Control model: Hi5a-S • Number of controlled axes: 16 simultaneous • Operations: Programming and Playback • Interpolations: PTP, Linear, Circular • Position control: Serial Absolute Encoder • Memory/backup: USB or Ethernet • Servo system: Full digital servo • Interface: Native DeviceNet, 2x Ethernet, 2x RS232/RS422, 1x USB, 1x CAN (optional), 1x DeviceNet Master, 1x SD card • Dimensions: 700 × 900 × 630 mm Bwsdpfxsy Hiams Ak Hsl • Teach pendant: TP520 (7" color TFT-LCD touch panel, Windows CE) • Compliance: CE Declaration of Conformity and manuals included Additional equipment • Robot support podium (machined base ready for floor fixing) • Special gripper with spring-suspended suction cups and autonomous vacuum generator • Removable “claws” for tray handling • Industry 4.0 cyber-physical system (remote monitoring / tele-assistance) • Pro-face 7" color touch panel for production monitoring

Condition: excellent (used), Total Space Required (with panel saw) mm 11600 x mm 7500 (ca.) 209011) AUTOMATIC BOARD STORAGE SYSTEM (LOADER) for PANELS - BARBARIC Mod. LCV Max panel size mm 4250 x 2200 Mobile upper bridge (on X-axis, length mm 11400), with mobile carriage (on X-axis) Bjdey Hiymjpfx Ak Howl Vacuum suction cup group (mobile on Z-axis) 90° rotating 90° rotation of panels up to 2800 mm in length 209010) PANEL SAW Mod. FH 4 430 Numerical Control MCS Evolution (Software base Windows XP) Rear pushers with No. 7 clamps / grippers Max. cutting width (mm) 4300 Max. blade projection (mm) 105 Max. clamp opening (mm) 105 Scoring Unit (max. diameter saw) mm 200 Main Sawing Unit (max. diameter saw / power) mm 360 / Kw 18 Adjustable speed of the saw carriage (m/min) 5 - 160 No. 4 front supporting tables with Air blowing system Total power (Kw) 35 (ca.)

Year of construction: 2013, condition: used, Technical data of the bale opener line for RDF. MSW, paper, cardboard: Manufacturer Cross Wrap Oy Ltd, Siilinjärvi, Finland Type BO 4000 Year of manufacture 2015 Quantity of opened bales 674 pieces Operating time only 3 days, exclusively by running in the entire line during new installation Opening time approx. 45 seconds per bale Bale dimensions (W x H x L) 1100 x 1100 x 1400 - 1900 mm Max. Bale weight 2,000 kg Conveying height of the system 1,400 mm Max. Conveying width of the system 1,200 mm Material to be opened RDF/MSW Availability of the line 98% Noise level of the bale opener line 85 dB(A) Bedpfeu Tg I Dox Ak Hswl Total connected load 37 kW Rated current 125 A Operating display SIEMENS SIMATIC HMI Touch Control SIEMENS S7 ET200S Installation dimensions 8,463 x 2,890 x 3,960 mm (l x w x h) Scope of delivery: Feed conveyor 3,500 x 1,200 x 1,400 mm Feed conveyor to opener 1,500 x 1,200 x 1,400 mm Bale opener (gripper with knife) Special equipment: Oil heating in hydraulic oil tank Heating in control cabinet Oil cooler in Hydraulic unit Explanation of the short period of use: The entire line of Cross Wrap bale openers type BO 4000 was installed at a municipal waste incineration plant in 2015. The background to the installation was that in the case of a malfunction or maintenance of the incinerator, the municipal waste could continue to be received, baled, wrapped and stored until the malfunction was cleared. Then the bales should all be opened again and the waste fed into the normal incineration process. This worst-case scenario never came to pass. The plant was set up, run in and then never used in regular operation. Only during the commissioning and running-in of the entire plant in 2015 were 674 bales opened on three days. The plant is in very good condition and ready for operation immediately. Due to reconstruction measures in the incineration plant, the installation area of the bale opener was needed. As a result, the entire line is for sale. Short description of the wrapping process: The pressed bales are placed on the infeed conveyor belt from the side or from behind by means of a forklift truck. For opening, the bales must run horizontally to the conveyor belt with the wire or twine binding, otherwise the bales must be turned 90° beforehand. The opening conveyor brings one bale at a time in front of the cutting unit. The grippers hold the wires or twine strapping. The front and rear rotating knives slit the bale lengthwise. Afterwards, the gripper returns to the starting position. The opened bale is now conveyed via the conveyor belt to the discharge chute and then falls onto the following conveyor system. Comments: New price of the completely plant 296.000,- €. The documentation (operating instructions, CE declaration, electrical/hydraulic circuit diagram) is complete. The unit has been dismantled into freight-manageable units, stored and is available for inspection and loading at short notice. We do not accept any liability for the technical details or any errors.

Condition: used, Year of construction: 1966, functionality: limited functionality, Automatic die cutter Bobst SPO 1575 EEG ref 2994 Bwjdpjy Hxw Iofx Ak Hjl Year – 1966 Max sheet size – 1055 x 1575 mm Min sheet size – 400 x 600 mm Max mechanical speed – 4,500 sheets/hour Max pressure – 350 t Vacuum feeder Stripping unit Gripper edge waste removal Batch delivery Sold as is, still in production Available from end of July 2026 Very low price for quick deal

Year of construction: 2010, condition: used, Universal machine for eroding and grinding various PCD tools up to 250 mm in diameter and 200 mm in length in production and service. Accessories: Total enclosure, Extraction N183, Cooling and cleaning device for dielectric, Automatic fire extinguishing device, Loader for erosion disc sets with CNC-controlled swivel arm for loading and unloading 1 set of gripper fingers for workpiece automation HSK 63/SK40 Workpiece carrier adaptation A-axis from SK 50 to HSK 63 A, 1 exchange element with flange, 1 x flushing kit, Test bar X axis travel: 440 mm B-axis: +/- 15° Y axis travel: 876 mm Z-axis travel: 420 mm E-axis swivel range: 210° A-axis rotation range: 360° workpiece carrier base: SK 50 workpiece length max.: 200 mm Bjdpfjycckcox Ak Hswl Workpiece diameter max.: 250 mm workpiece weight: 15 kg Connected load approx.: 6.7 kW 400V/50 Hz Weight approx: 7000 kg Dimensions W x D x H =: 1987 x 3141 x 2275 mm colour: RAL 7047 Telegray 4/ Color RAL 7045 Telegray 1

Condition: used, machine/vehicle number: 008514, Max. panel width: 4250 mm Max. panel length: 4300 mm Bedpfx Asy Edn Ask Hewl Main saw blade projection: 95 mm No of Grippers: 7 Second flexible pusher: yes

Condition: ready for operation (used), Year of construction: 2022, spindle speed (max.): 2,800 rpm, travel distance X-axis: 280 mm, travel distance Z-axis: 830 mm, spindle motor power: 30,000 W, total height: 1,915 mm, total width: 2,035 mm, overall weight: 5,650 kg, product length (max.): 3,821 mm, number of axes: 3, This 3-axis DOOSAN Puma GT 3100 M was manufactured in 2022. It features a maximum turning diameter of 376 mm and a turning length of 725 mm. The machine is equipped with a 12-station tool turret and a three-jaw power chuck diameter of 305 mm. If you are looking to get high-quality turning capabilities, consider the DOOSAN Puma GT 3100 M horizontal turning machine we have for sale. Contact us for further details. • Siemens S828D control touchscreen with ShopTurn 15-inch display • 3-axis CNC horizontal turning machine with driven tools and tailstock • C-axis main spindle: 360° resolution 0.001° • C-axis speed: 200 rpm • C-axis torque: approx. 1162 Nm • Swing diameter over bed: 720 mm • Swing diameter over cross slide: 590 mm • Max turning diameter: 376 mm • Max turning length: 725 mm • Main spindle bore: 115 mm • Bar capacity: 103 mm • Spindle nose: ASA A2-11 • Max torque: approx. 1112 Nm • Rapid traverse X-axis: 24 m/min • Rapid traverse Z-axis: 30 m/min • Feed force X-axis: 9465 N • Feed force Z-axis: 17379 N • Three-jaw power chuck diameter: 305 mm with soft jaws • 12-station tool turret with BMT65P tool holders • Max driven tool speed: 5000 rpm • Driven tool power: approx. 7.7 kW • Driven tool torque: approx. 75 Nm • Tailstock with quill diameter: 100 mm • Quill stroke: 100 mm • Hydraulic clamping system with hollow cylinder • Monoblock cast iron machine bed, Meehanite construction • 30° slant bed design • Hardened and ground guideways with low-friction coating • Automatic central lubrication • Coolant system: 7 bar pressure • Coolant tank capacity: approx. 235 liters • Hydraulic tank: approx. 20 liters • Full enclosure with working area lighting • Bar feeder interface • Oil skimmer • Electronic safety clutch for X and Z axes • Electrical connection: 400 V, 3-phase, 50 Hz • Total power: approx. 47 kVA • Unused (like new) Additional equipment • OPTIONAL: HALTER LoadAssistant Universal Big 70 (robot) • Gripper for Doosan Universal Big 70 • Turning station • Workpiece support • Base plate 23 mm / 175 mm Big 70 Bwsdpfx Aoy E I Hijk Hjl • Machine interface box Technical Specification Counter Spindle No Driven Tools Yes