Used Gripper for sale (786)

Condition: ready for operation (used), Year of construction: 2020, operating hours: 50 h, functionality: fully functional, overall weight: 8 kg, load capacity: 1 kg, arm reach: 790 mm, controller manufacturer: igus, controller model: iRC, input voltage: 24 V, repeat accuracy: 1 mm, igus robolink® DP 5 DOF articulated arm robot (RL-DP-5) A functional video can be sent upon request. Manufacturer: igus Model: robolink® DP 5 DOF articulated arm (RL-DP-5) Category: Industrial robot / Articulated arm robot Condition: Used machine / Like new (exhibition piece / test operation) Year of manufacture: 2020 Operating hours: approx. 50 hours Location: 6133 Weerberg / Tyrol Availability: Immediate Nledezl N Tujpfx Ahnef PRICING: ----- Price type: Negotiable Price (net): 3,450,- EUR (plus 20% VAT, if a B2B invoice is desired) Invoice details: VAT can be shown (B2B invoice possible) For sale is a like-new, immediately ready-for-use 5-axis industrial robot (articulated arm) from the renowned igus® brand, part of the proven robolink® DP series (item number: RL-DP-5). The system was used exclusively for a short laboratory or test project and has only approximately 50 operating hours. The robot is in flawless, absolutely like-new condition, both technically and visually. Thanks to the integrated absolute value encoders on the stepper motors, the arm does not lose its current position even after a power failure, emergency stop, or restart. Complex reference runs are therefore not necessary during ongoing operation. SCOPE OF DELIVERY & SYSTEM PACKAGE: • Articulated arm: igus robolink® DP 5 DOF with backlash-free drylin® gears, stepper motors, and encoders. • Control electronics: Modular DIN rail version (complete control computer for mounting in a control cabinet). • Software: Original royalty-free igus iRC (igus Robot Control) programming software (free download for intuitive, easy programming on a PC). • Free test accessories: A fully functional, self-built vacuum gripper is included in the package as a free addition for immediate testing and training. TECHNICAL PARAMETERS: • Degrees of freedom / axes: 5 DOF • Payload: 0.5 kg (nominal) to max. 1.0 kg (depending on the working area) • Reach: approx. 790 mm • Swivel range (axis 1): 360° • Control: igus Robot Control (iRC) – DIN rail control computer • Voltage supply: 24 V DC (approx. 12 A) • Interfaces: 7 digital inputs and outputs (I/Os) for peripherals & gripper • Weight (articulated arm): extremely light 7.94 kg • Repeatability: +/- 1.0 mm CONDITION / INSPECTION: The device is currently ready for operation and can be demonstrated and tested on site if desired. HANDLING & SHIPPING: • Collection preferred (postal code: [Your postal code]) • Insured shipping via a freight forwarder or parcel service in a robust transport box is possible after consultation and upon assumption of costs. • A proper B2B invoice with VAT can be issued upon request. If you are interested or have questions about technical integration, please contact us directly via the message function. ----- Legal notes for used machines: The sale is preferably made to commercial enterprises (B2B) with the exclusion of any warranty, guarantee, and liability for defects. Subject to prior sale.

Condition: excellent (used), functionality: fully functional, Year of construction: 2016, Paper roll gripper, Bolzoni Auramo model AR-25RJ-16F (1-2 roll clamp, split long arm) Capacity: 2000 kg Load Center: 800 mm Roll Range: 700-1600 mm Height: 830 mm Weight: 760 kg Horizontal Center of Gravity: 292 mm Vertical Center of Gravity: 360 mm Effective Thickness: 190 mm Warning: Sold without a solenoid valve. All information is on the data plate. Nledpfx Aoy Uru Ajhnjf Condition: Ready for operation and fully functional. Technical condition: Very good. Available from July 15th, following the installation of the new gripper.

Condition: used, Year of construction: 1999, Used Bottle Rinser PROCOMAC Gripstar up to 6000 bph This Used Rinser  not only delivers high efficiency but also ensures excellent performance for bottle rinsing. Procomac manufactured this system in 1999, and designed it to operate at a maximum speed of 6000 bottles per hour (BPH). As a result, this setup guarantees optimal performance in production lines. The rinser handles bottle formats ranging from 0.20 to 1.5 liters, providing versatility and adaptability in different production settings. Furthermore, its robust construction adds to its overall efficiency. Technical Features of the Rinsing Machine PROCOMAC Gripstar The Gripstar rinser features 32 grippers that operate in a clockwise rotation. Consequently, this design stabilizes the bottles during the rinsing process and reduces the risk of damage or malfunction. In addition, the system incorporates fixed nozzles, which simplify maintenance and minimize wear over time. Moreover, this technical setup improves the longevity of the machine, making it a reliable choice for high-speed operations. Types of Treatment and Configuration The machine supports a single treatment cycle, allowing it to perform rinsing using either water or air. This is important because it makes the Used Bottle Rinser PROCOMAC Gripstar up to 6000 bph suitable for a wide range of products, from food-grade liquids to cosmetics. Additionally, its modular configuration enables seamless integration into existing production lines without requiring significant structural changes. Thus, it offers flexibility in various production environments. Therefore, manufacturers can easily adopt it even in complex setups. Operating Conditions and Current Status The Used Bottle Rinser PROCOMAC Gripstar up to 6000 bph remains stored in excellent condition, ensuring it is fully operational once installed. Despite the fact that the machine dates back to 1999, proper storage has preserved its functionality. Because of its durable design, it will continue to deliver reliable performance for years. Moreover, the use of standard components simplifies maintenance and part replacement, which helps reduce downtime as well as operating costs. In other words, the machine is built to last and operate efficiently under various conditions. Electrical Data and Energy Consumption This machine runs on 415 volts, consuming 3.1 kW of power at a frequency of 50 Hz. The machine draws 5.4 amps, ensuring energy efficiency compared to similar models. Thus, these specifications make the system compatible with most industrial electrical infrastructures. As a result, the machine ensures smooth installation while minimizing energy costs. In addition to its energy-saving features, the machine supports a sustainable production process. Conclusion of the Rinsing Machine PROCOMAC Gripstar Nlsdpjvgvipofx Ahnsf In summary, the Used Bottle Rinser PROCOMAC Gripstar up to 6000 bph offers reliability and speed, making it an excellent choice for bottling lines.

Condition: used, Year of construction: 2006, Used filling monoblock Bertolaso Miniblock 12/12/1 2500 bph Introduction to the Used filling monoblock Bertolaso Miniblock 12/12/1 2500 bph Nsdpfxsx H Rn Ee Ahnelf The Used filling monoblock Bertolaso Miniblock 12/12/1 2500 bph offers a compact and high-performance solution for bottling still wine. Bertolaso, a renowned manufacturer, built this specific model, the Miniblock Olimpia 12/12/1, in 2012. Consequently, the machine combines rinsing, filling, and capping functions into a single, efficient structure. Operating performance of the Used filling monoblock Bertolaso Miniblock 12/12/1 2500 bph The Used filling monoblock Bertolaso Miniblock 12/12/1 2500 bph processes 2500 bottles per hour and operates in a clockwise direction. Moreover, the system includes complete safety protections that comply with current industrial machinery standards. It also comes with technical manuals and full revision documentation. Therefore, operators can manage installation and maintenance activities efficiently. Operational status and production applications The Used filling monoblock Bertolaso Miniblock 12/12/1 2500 bph currently runs in production and bottles still wine. Specifically, its rinsing unit uses 12 grippers and performs a single treatment cycle to clean containers internally before filling. Consequently, it ensures high hygiene standards. In addition, the modular construction allows easy adaptation to different production requirements. Technical specifications of the filler The filling section of the Used filling monoblock Bertolaso Miniblock 12/12/1 2500 bph features 12 valves. Particularly, the system fills containers using a light vacuum method, which preserves the wine’s organoleptic properties. Furthermore, the use of fixed valves ensures reliable performance and simplifies maintenance procedures. Thus, the machine minimizes downtime during cleaning or part replacement. Capping system of the Used filling monoblock Bertolaso Miniblock 12/12/1 2500 bph The capping unit of the Used filling monoblock Bertolaso Miniblock 12/12/1 2500 bph applies flush corks using a single capping head. As a result, it maintains consistent sealing quality across all bottles. It handles corks with a 26-millimeter diameter, maintaining compatibility with common industry standards. Similarly, the PLC-based control system by Siemens ensures high automation precision. In fact, it guarantees seamless operation even during extended production shifts. Therefore, companies can integrate the monoblock into automated bottling lines without requiring major modifications. Dimensions and configuration of the Used filling monoblock Bertolaso Miniblock 12/12/1 2500 bph The Used filling monoblock Bertolaso Miniblock 12/12/1 2500 bph has only 4000 operating hours and remains in excellent working condition. Hence, it represents a very reliable choice for businesses requiring immediate production integration. It measures 4000 millimeters in length, 2450 millimeters in height, and 1850 millimeters in width, fitting easily into compact production areas.

Condition: used, Year of construction: 2004, machine/vehicle number: SO127, Blow Molding Machine Contiform – Overview This used Krones Contiform S8 blow molding machine is engineered for high-efficiency production of PET bottles in modern beverage and industrial packaging operations. With a rotary configuration and robust mechanical design, it reaches up to 13,000 bottles per hour, supporting scalable output for medium to high-speed lines. The machine is optimized for PET containers and is suitable for diverse beverage production environments, including water, beer, wine, spirits, milk, oil, and carbonated soft drinks. Krones engineering ensures excellent reliability, consistent bottle quality, and streamlined changeovers. Designed as a versatile component for a used bottling line or as a standalone blow molder, this second hand system delivers precise preform handling and stable heating, coupled with efficient blowing performance. It features an Alaska thread finish, an 8-cavity configuration, and a clockwise work direction, making it a proven choice for beverage production and industrial packaging where uptime and repeatability are critical. Technical Specifications & Performance Data Manufacturer: Krones Model: Contiform S8 Nlsdpfxjx H Tf Tj Ahnef Manufacturing year: 2004 Configuration: Rotary Maximum speed: 13,000 bph Container material: PET Current bottle format: 0.5L No. of cavities: 8 Thread/neck finish: Alaska Max container height: 350 mm No. of grippers (inlet–outlet): 6 No. of mandrels: 180 Work direction: Clockwise Working plane height: 1470 mm Electrical supply: 400 V, 3-phase, 50 Hz Operating current: 331 A Operating pressure: 40 bar PLC: Siemens HMI: Krones Advanced Automation & Control Systems The Contiform S8 integrates a Siemens PLC for robust automation and process control, complemented by a Krones HMI for intuitive operation and fast diagnostics. The control architecture supports stable preform heating profiles, accurate blowing cycles, and reliable handling of PET preforms and bottles. Safety interlocks and operator protections are integrated into the guarding and access points to support consistent production with minimized downtime. Production Line Integration Capabilities This blow molding machine can operate as a standalone unit or integrate seamlessly into a complete used bottling line. It interfaces effectively with upstream preform feeding systems and downstream air conveyors, rinsers, fillers, and labelers. Format changeovers are streamlined around the 8-cavity rotary platform, and the Alaska neck finish provides compatibility for a wide range of closures and filling monoblocks across beverage production. Machine Condition & Maintenance History The machine is available in multiple supply configurations: as-is, refurbished and guaranteed, or ready for operation with compatible spare parts. When supplied refurbished, a 6-month warranty is available, offering confidence in performance and longevity for second hand indus...

Condition: used, Year of construction: 1995, Used Filling Triblock GAI 12.1.16.1. 16 Valves 2500 Bph Rinsing machine with 12 grippers, applying a single treatment of air blown on the bottle mouth before straightening. Carousel grippers manually variable in height 1. 1-head station for vacuum and gas injection before the filling machine with variable head in height 2. Filling machine 16 light vacuum taps in bell Filling bell manually variable in height Mechanical spring bottle lifting pistons Nsdpfxjvguz De Ahnjlf 1. capper 1 head straight cork Leveler before closing with gas injection In the used triblock there is the vacuum system before closing the bottle Head manually variable in height All frame made of stainless steel Fairing of stainless steel Safeguards on the whole perimeter Bottle from left side Year 1995 marked CE Production approximately 2.500 bph with the 0.75 Ml

Condition: good (used), Year of construction: 2017, 1 used machining center Brand DMG Type Milltap 700 Year of manufacture 2017 Serial number A00007 with interchangeable pallet and robot automation Control system: Siemens 840D SL Travel paths: X 700 mm Y 420 mm Z 380 mm Table size 840 x 420 mm Spindle Njdev T Rtiopfx Ahnjlf Speed: 10,000 rpm Tool holder: DIN30 25-position tool changer Dimensions and weight Dimensions: 2,500 mm x 1,650 mm x 2,950 mm Weight: approx. 3,400 kg Condition Condition: Used Functional: Tested and fully functional Other equipment and included accessories: Tool changer Chip conveyor Internal tool cooling with high-pressure system 40 bar Preparation 4-axis Oil and emulsion separator Air blown through spindle center Nano package Renishaw measuring kit WH 3 workpiece loading and unloading system with 6-axis Fanuc robot PGN 50 special gripper unit

Condition: used, Year of construction: 1991, machine/vehicle number: R58, Used isobaric filler Machine Bertolaso 11000 bph year of the remark of isobaric filler 2021 suitable for bottling sparkling and semi-sparkling wines entrance on the left completely overhauled isobaric filler in all its parts with original Bertolaso spare parts (documentable) bottle sizes 85, 88, 90, 112 6 sets of channels with isobaric filler to make the levels the electrical panel of the Used Isobaric Filling Machine according to CE standards use and maintenance manual, spare parts manual available for this isobaric filler Nlodpovguv Ujfx Ahnjf the production speed of isobaric filler is 9000 BPH with the sparkling wine the production speed is 7000 BPH with spumante. This isobaric filler is immediately available and delivered in case of purchase. We can assist the buyer in each step of the commissioning and testing operation of the Used Isobaric Filling Machine. How to build one isobaric triblock: The isobaric filler can be connected either to an automatic rinsing machine or to one or more cappers. We have 40 Bertolaso SBR grippers and two series of Bertolaso mushroom and satin cappers. One has 6 heads and reaches 9.000b / h, and one has 10 heads and reaches 14.000 BPH We can introduce all the machines in a sterile clean room with a filtration system. You can have the performance of an isobaric triblock with a Used Isobaric Filling Machine for natural cork and mushroom. Productivity can be from 11,000 to 14,000 BPH. It is possible to foresee a periodic maintenance program for isobaric filler to always have excellent efficiency. This involves both having spare parts in stock and foreseeing machine stops for a week/10 days. In case of purchase of the isobaric filler triblock, at least 9.00 meters by 2.50 meters, H 4.00 meters are required. The creation of a clean room guarantees the absence of contamination in the bottling phase.

Condition: used, Year of construction: 2004, Used filling monoblock CUSTOM ALPHA 32 32 8 11000 BPH The Used filling monoblock Costum Alpha 32-32-8 bottles carbonated beverages and water both still and sparkling in PET containers using an isobaric process. Custom manufactured this model in 2004 consequently it reaches a production capacity of 11000 bottles per hour for the 0.25 L format with reduced speeds for larger formats. Main Technical Features The Used filling monoblock CUSTOM ALPHA 32 32 8 11000 BPH operates with a clockwise rotation system and integrates three main operational sections rinsing filling and capping. Therefore it ensures a smooth production process. Rinsing Section of the Used filling monoblock Costum Alpha 32-32-8 The machine uses 32 grippers to handle bottles and applies a single treatment for internal container cleaning before filling. By eliminating additional washing phases it optimizes efficiency and reduces process times. As a result production runs more efficiently. Filling Section The filler contains 32 isobaric filling valves with fixed nozzles that maintain a constant and controlled liquid flow. Additionally this system delivers high dosing precision and minimizes the risk of overfilling or product waste. In other words it ensures both accuracy and minimal loss. Capping Section in the Used filling monoblock Costum Alpha 32-32-8 Nljdpev Ng Uhjfx Ahnsf The integrated capping system supports plastic screw caps and operates with 8 capping heads. Specifically it is designed for 1881 and 1810 neck types. Consequently the system included in the Used filling monoblock Costum Alpha 32-32-8 applies caps securely ensuring an airtight seal and protecting the bottled product. Moreover it enhances product safety. Formats and Productivity The Used filling monoblock Costum Alpha 32-32-8 processes bottles of various capacities adjusting productivity accordingly. For example it fills 11000 bottles per hour for the 0.25 L format while the speed decreases to 4900 bottles per hour for the 1.5 L format. Similarly intermediate formats such as 0.33 L and 0.50 L achieve proportional productivity levels. As a result it provides a flexible solution for different production needs. Electrical Data and Dimensions The machine operates at 380V 50Hz with a power consumption of 6 kW. Furthermore its dimensions are Width 3150 mm Length 4200 mm Height 2500 mm Safety and Lifecycle of the Used filling monoblock Costum Alpha 32-32-8 The Used filling monoblock Costum Alpha 32-32-8 includes safety devices that maintain compliance with current regulations. In addition these features enhance operational reliability. The machine will remain in operation until the end of 2026 thus allowing for several more years of use before requiring an upgrade or replacement. Given this longevity it represents a valuable investment. The machine provides a reliable technical solution for companies needing an efficient isobaric filling system. Furthermore it remains compatible with various PET bottle types and is suitable for medium scale production. As a final point its design ensures long term efficiency and performance.

Condition: like new (used), Year of construction: 2024, For sale: 8-colour offset printing press RMGT 970PF-8, configuration 8/0 or 4/4, with convertible perfecting unit. The machine is designed for high-quality industrial printing and is equipped with an extensive range of automation systems, including presetting, register control, cleaning systems, and colour measurement. Main technical specifications: Maximum paper size: 650 × 965 mm Minimum sheet size: 290 × 410 mm Minimum sheet size in perfecting mode: 370 × 410 mm Maximum printing area: 640 × 930 mm Maximum printing area in perfecting mode: 630 × 930 mm Maximum printing speed: 15,000 sheets/hour Stock thickness: 0.04–0.5 mm Plate size: 700 × 945 × 0.30 mm Feeder pile capacity: 1,100 mm Delivery pile capacity: 1,100 mm Machine dimensions L × W × H: 12,960 × 3,453 × 2,011 mm Equipment and features: PCS-G Printing Control System Rotary stream feeder Static eliminator on delivery Mechanical double-sheet detector Vacuum suction-type feeder board Paper size preset system Registration device Vertical and lateral image micro-adjustment Ultrasonic double-sheet detector Slewed sheet detector Side lay detector Front-lay Bernoulli device Side lay preset Printing, inking and dampening units: Straight edge plate clamp with positioning pins Infed lower swing gripper feed drum Gripper margin: 10 mm Remote control for vertical, lateral and diagonal register 19 inking rollers, including form rollers 4 dampening rollers R-matic dampening system Nedpfoy S S Azsx Ahnolf Oscillating bridge roller Double-double-single perfecting cylinder configuration Delivery section: Static eliminator Chain gripper delivery Delivery jam detector De-curler device Board insertion device Powder sprayer High pile delivery Delivery area sensor Paper size preset system Paper guide under the first delivery drum Delivery belt guide Belt-type vacuum slow-down wheels Additional options: Automatic feeder pile lateral alignment function Blower guide under the swing Pneumatic pull side guide Feeder air preset Impression pressure preset Impression cylinder cleaning function Feed drum fan-out adjustment mechanism Automatic blanket cleaning device Automatic ink roller cleaning device Smart-FPC plate changing device Ink form rollers 1st–3rd oscillating Hollow rollers for ink roller temperature control system R-matic_D remote ON/OFF Technotrans alpha.c chiller with alcohol density control Photo-type delivery pile lowering sensor Delivery fan antistatic eliminator PPC Server III for CIP-4 file transfer Press information display LithoFlash® Inline RMGT 970 Recto Verso automatic inline measurement system LithoFlash software package: LithoDyn ADR, LithoDyn JobChange, LithoFlash OneShot Machine raised by 200 mm The machine has CE marking, safety covers, tools, and documentation in English. The machine is sold in its current condition and at its current location — “as is, where is”. Inspection is possible by prior arrangement. An excellent solution for printing companies requiring a modern, high-performance 8-colour offset press with 8/0 and 4/4 printing capability and advanced process automation.

Year of construction: 2013, condition: good (used), • Max Sheet Size: 1,060 x 760 mm • Min Sheet Size: 400 x 350 mm • Max Cutting Size: 1,060 x 745 mm • Gripper Margin: 10 mm • Max Mechanical Speed: 7,700 sheets/hour • Paper Range: o Paperboard: 90–2,000 g/m² o Corrugated board: up to 4 mm (depending on flute) • Cutting Force: 260 tons • Pile Height (Feeder/Delivery): o Feeder: up to 1,350 mm o Delivery: up to 1,150 mm • Feeder Type: Non-stop • Delivery Type: Non-stop • Register System: Optical and mechanical sheet alignment Nlodow E Iumepfx Ahnsf • Die-Cutting Plate Size: 1,080 x 760 mm

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, 1 Panel Sizing Saw with Storage System Manufacturer: HOLZMA Model: PROFILINE HPL 530/56/22 – right-hand machine Year: 2008 Including integrated storage system PROFI TLF610/10/05/L Manufacturer: BARGSTEDT Year: 2013 Woodstore inventory management software, offcut management, etc. Storage area approx. 37 x 11.5 m Max. stack height in storage: 2,500 mm Speed Concept: sets completely new standards that revolutionize panel dividing technology. + Significantly higher speed and dynamic acceleration of the saw carriage. Nedpjyw Ivhofx Ahnolf + Extreme acceleration of the program pusher. + Central angle alignment device. + Electronic height control of the pressure beam. + Optimized motion sequences via integrated gripper measuring system. Cutting length: 5,600 mm Cutting width (program pusher travel): 5,600 mm Panel rotation device for head cuts Laser guide light: marks the cutting line on the workpiece for visible or scribed cuts. Lift table feeding Lift table size: 5,600 x 2,200 mm PROFILINE VAC infeed carriage 5,600 mm Separate infeed carriage for gentle loading of sensitive single panels via vacuum, as well as efficient infeed of panel packs. Saw blade projection: 130 mm Saw carriage feed: Forward 1-150 m/min Reverse constant 150 m/min Program pusher speed: Forward/reverse 90 m/min (in EU countries forward = 25 m/min) Automatic pressure beam height control: yes Automatic cutting height: yes Adjustable pressure beam contact pressure: yes Adjustable gripper contact pressure: yes Gripper release: yes Fully air-cushioned machine table (saw body): yes Angle alignment device: Min. alignment width: 0 mm Max. alignment width: full cutting length Main saw motor (at 50 Hz): 18.0 kW Frequency control: 1,700 – 4,200 rpm Scoring saw motor: 2.2 kW Operating voltage: 400 V / 50 Hz Working height: 1,020 mm SPZ UNIT W. LIFT ELEMENT 2-FINGER 11/510/530 AUTOMATIC EJECTOR FENCE Program-controlled ejection of panel packs to the area of the air cushion tables. FULLY AUTOMATIC SCORING SAW ADJUSTMENT TYPE 530 Camera-controlled GROOVE PROGRAM (AUTOMATIC) Groove program with graphical input and sequence display. Positioning accuracy: Groove depth is steplessly variable via control (hydraulic stop). CUT-OUT/STRESS RELIEF CUTTING PROGRAM LABELLING WITH PART GRAPHICS LABEL PRINTER TYPE PICA 108 Thermal / thermotransfer label printing station OPTIMIZATION PROGRAM 'CAD-PLAN' -JUST-IN-TIME- Additional 'Just-in-time' function (possible operating modes): 1. Optimization at the saw ----- - Possible import of part lists from industry packages, Excel, etc. - Incorporates available offcuts in optimization - In case of production interruption, unproduced parts can be re-optimized - Flexible selection of which parts with which material are optimized and produced at which time 2. Transfer of optimized data to the saw - Modification of optimized cutting plans at the saw: - Delete/add parts - Add available offcuts - Change panel sizes - Combine runs, etc. New optimization is performed directly at the saw. ONLINE DATA TRANSFER + USB PORT CAMERA MONITORING OF THE FEED AREA Material specifications for lift table feed: Max. waviness: 40 mm/m Panel thickness min. 6 mm Thickness tolerance per panel max. +/- 0.2 mm Stacking accuracy +/- 50 mm

Condition: excellent (used), Numerical Control Power Control + Software Cadmatic 4 Professional No. 1 Infeed roller tracks (ca.) 32,000 mm Lifting table (mm) 5600 x 2200 VAC loader (sliding bridge) with fan suction for loading special or delicate panels 1° Rear-pusher, with No. 6 clamps/grippers Turning device (rotating unit) at 90° 1° Panel Saw - Max cutting width mm 5600 (cutting line with air cushion) Max blade projection (mm) 190 Scoring Unit (max. diameter saw / power) mm 200 (Kw 2,2) Main Sawing Unit (max. diameter saw / power) mm 600 ( Kw 36) Adjustable speed of the saw carriage (QS) (m/min) 1 - 130 m/min 2° Rear-pusher, with No. 14 clamps/grippers 2° Panel Saw - Max cutting width mm 2200 (cutting line with air cushion) Max blade projection (mm) 190 Nsdpevnq H Esfx Ahnslf Scoring Unit (max. diameter saw / power) mm 200 (Kw 2,2) Main Sawing Unit (max. diameter saw / power) mm 600 (Kw 36) Adjustable speed of the saw carriage (QS) (m/min) 1 - 130 m/min Waste evacuation system with grinder (Kw 19.5) No. 2 Front supporting tables with Air blowing system (mm 800 x 2160) Plastic wheels coated with special material to avoid scratching delicate panels Automatic unloading System of the cut panels: N° 2 x Liftomat HAU-A 25/12 Automatic Stacking System with 8 stations

Condition: refurbished (used), Year of construction: 2010, XXL-Center RAS 75.06 - General technical data in mm: Bending length: 6400 mm Max. sheet thickness (400N/mm2): 1.5 mm Max. sheet thickness (750N/mm2): 1.0 mm Max. sheet thickness (200N/mm2): 2.0 mm Gripper claws travel range: 10 – 750 mm Clearance in front of the jaws up to: 300 ° Extendable loading tables: yes Gripper claws: yes Programming: automatic via Bendex Machine dimensions incl. safety fence approx.: 9400 x 3000 Weight: 12.5 tons - Nljdpfxex Hf Tvo Ahnsf Machine-specific data: Motor-driven; 400V, 50/60 Hz, 3-phase Year of manufacture: 2010 Condition: Will be completely overhauled - Images are examples -

Condition: ready for operation (used), Year of construction: 2013, travel distance X-axis: 630 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 850 mm, controller manufacturer: SIEMENS, controller model: 840 D, table width: 500 mm, table length: 500 mm, spindle speed (max.): 18,000 rpm, spindle motor power: 20,000 W, number of slots in tool magazine: 303, number of axes: 4, This DMG DMC 60H Linear Horizontal Machining center was manufactured in the year 2013 and has 46048 production hours. It is equipped with a Siemens 840 D control unit and has 4 axis. The machine has a spindle speed of 18000 rpm. See original delivery note as PDF (German) attached to see all technical positions. Additional equipment • Scraper belt chip conveyor with coolant system 980 liter, paper belt filter, discharge height 950 mm, width 380 mm, IKZ 80 bar / 14 l/min through spindle center (AD), pressure infinitely programmable, selectable via NC program, Roof flushing of the working area 180 l/min via flushing nozzles with a ripple valve • Rotating viewing window / work area door • Flushing gun with pump • Double gripper • Wheel magazine • NC rotary table Ø 630 mm • 3D path control Machine Benefits Qualitative Machine Benefits • Mcis tdi tool management (module tdi machine) - overview , tool handling, planning • Extraction mechanical and electrical preparation for oil mist extraction • Tool breakage check mechanical design Technical Machine Benefits • Number of pallets: 12 // round pallet storage: rs 12 • Rotary pallet changer // work table with pallet support // permissible load: 600 kg // 2 pallets 500 x 500 mm with t-slots // pallet management // pallet changer cladding // claw flushing pallet • Cooling through the spindle center: 80 bar • Tool magazine: wheel magazine (5 wheels) with 303 magazine slots hsk a63 • Infrared measuring probe renishaw pp60 optical (omp60) hsk-a 63 Nedpfx Ahjyi Ekfonslf • Mpc machine protection control (machine protection through rapid shutdown) • Laminated glass safety pane for right-hand cabin door window Extra Information Documentation and Electrical circuit diagram (German) available

Condition: used, Material clamp, material gripper, load clamp Lifting clamp, hoisting clamp, block grab Nodpfx Ahsdz Spnjnolf Manufacturer: NORDGREIF, Type 7548 Year of manufacture: 1997 Load capacity: 500 kg Gripping width: 280 to 420 mm - Width adjustment via trapezoidal thread with hand crank - Rubber protective coating on the gripping surfaces - for crane operation - with CE marking Weight: 50 kg good condition

Condition: ready for operation (used), SIG Positec Berger Lahr linear positioning system LP-A + gripper unit, consisting of: LP-A (X=300/Z=100), VRDM 3910/50 LWB motors, UCH 325V, IN 2A, MN 4Nm, ROBA-stop-M 4/891.124.1 SO, 24V, 22W, 6Nm, used, in very good condition, 100% functional. Nodpfxsi Eclyj Ahnolf

Condition: as good as new (ex-display), Year of construction: 2018, The TAC CNX is a fully automatic machine that can cross cut straight or angled, coupled with a CNC vertical drilling unit and vertical hopper feed loading leading device. This means a combined operating cycle of feeding, drilling and cutting with no manual operator intervention. The TAC can also just be used for crosscutting if so required. The saw unit cutting angle automatically adjusts to the required angle from the program, while the drilling group is controlled in 3 axis with a 5 spindle point to point head. Programming is quick and simple thanks to the integrated colour graphic touch screen controller. The saw and drilling units are both located in an enclosed safety cabin with electrically interlocked doors, this giving the operator the highest level of protection. The machine is ideal for cutting and drilling for sofa / chair frame rails / parts, general furniture parts, plastics and / or aluminium extrusions. Specification - Heavy duty thick steel monobloc frame electro welded. - Automatic vertical loading system with length capacity upto 1350mm (longer on request). - Feeding via self centering grippers. - Special grippers to allow loading of / feeding of 2 pieces together (on top of each other). - Automatic step advancement movements of the material to be drilled / cut controlled by the NC on the X axis. Programmable movement from 1 to 1050mm, advancement speed max 60 mt/min (adjustable). Special 'macro' for back movement of the piece for material saving. - Outfeed motorised exit conveyor belt for cut / drilled parts 600mm long x 75mm wide. - Saw unit with 4kw motor/ 2800mm adjustable through inverter up to 4000 rpm. Automatic rotation of the sawblade +/- 60 degrees controlled by the CN. - 5 spindle in line vertical point to point drilling unit controlled on 3 axis by CN. - Easy programming with dedicated software with 12" screen an operator interface - Total protection of the the working cabin, interlocked doors with inspection windows. - In conformity with CE safety rules. Nlsdpfx Ahev Aalyjnof Working dimensions - Length feeding in one operation 1 to 1000mm (can be increased by setting more positioning steps of the loader. - Width 10 to 200mm cutting at 90 degrees. - Width 10 to 150mm cutting at 34 degrees. - Thickness 10 to 80mm. - Productivity approx 3 seconds per operation (feeding, drilling, cutting = 9 seconds) Complete with optional Vertical hopper feed loader with 3m length capacity Year - 2018 CE Condition - As new ex display [ only used for demonstrations.]

Condition: new, fuel type: gasoline, overall weight: 1,300 kg, operation weight: 1,200 kg, maximum load weight: 1,500 kg, lifting height: 1,000 mm, Year of construction: 2026, Equipment: hydraulics, Befard XM1200 - NEW TECHNICAL SPECIFICATION: • Lifting capacity 1200 kg - PICK&CARRY • Lifting capacity 1500 kg - with optional equipment • 3 hydraulic extensions • Arm opening angle 65 degrees • Vertical reach 10 m - with optional equipment • Non-marking tracks • Extendable chassis in the range of 780-1250 mm • Radio control • Column rotation 50 degrees Nedpex A Uc Ajfx Ahnjlf • Knee gear • Possibility of using a 500 kg or 990 kg winch - optional • LED lighting fixed + magnetic AVAILABLE POWER SUPPLY VERSIONS: 3in1 - petrol engine, electric motor (230 V, 400 V, 110 V to choose from) and lithium-ion batteries Combustion - powered only by internal combustion engine, Combustion electric - powered by internal combustion engine and electric 230 V, 400 V or 110 V OPTIONAL EQUIPMENT AVAILABLE: • Winch 500 kg or 990 kg to choose from • Manual JIB arm - increases the reach by 1 m - You can use 2 pcs. Manual Jib for the crane • Searching hook - works in 6 positions, increases the reach by 0.5 m • Hydraulic blade - An additional support blade at the front of the machine extends manually and lowers hydraulically. Additional options are available for the blade: • Forks • Tow hitch: Increases stationary lifting capacity to 1500 kg. Increasing the stationary lifting capacity to 1500 kg and the possibility of using an additional Jib arm • Radio control with display • Platform for standing on the machine - Platform for standing on the machine, as an increase in counterweight (not necessary in standard use) • Extension to the loading platform - Removable extension to the loading platform by approx. 500 m • Suction cup with hydraulic head - Suction cup with hydraulic head controlled from the remote control. Possibility of removing the suction cup and installing the hook. Head mounted at the end of the hydraulic extension • Holder for XP attached to the platform - Holder for XP glass gripper attached to the platform • RAL color - Choice of machine color from the RAL palette • Tow hook - Possibility of using a tow hook for the crane's transport platform • Ramps - Aluminum ramps 2.5 m long Befard XM1200 is a modern mini Pick & Carry crane designed for maximum functionality and mobility in difficult working conditions. Thanks to its compact dimensions, it easily fits through a standard door, and extendable tracks up to 1250 mm wide ensure stability and safety during crane operations. This versatile model offers an impressive reach of up to 10 meters - which allows work at the height of the second floor. The XM1200 mini crane can move with a load of up to 1200 kg, and with the use of support legs its maximum lifting capacity increases to 1500 kg. Optional equipment in the form of a winch additionally increases the flexibility of applications, making the XM1200 mini crawler crane an ideal solution for assembly, service, industrial or construction work. Possibility to test the equipment before purchase. * The price in the offer refers to the basic version powered by a petrol engine * ​​Product on order * Net price

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, travel distance X-axis: 300 mm, travel distance Z-axis: 700 mm, turning diameter: 140 mm, turning height: 380 mm, turning diameter over bed slide: 250 mm, TECHNICAL DETAILS Turning diameter: 140 mm Swing diameter: 250 mm Turning height: 380 mm Travel paths Travel - X axis: 300 mm Travel - Z axis: 700 mm Spindle Spindle speeds: 1 - 6,000 rpm Drive power 40% duty cycle: 38.00 kW Spindle nose: DIN 55026 - size 6 Spindle bore diameter at front bearing: 110 mm Feed & Rapid Traverse X-axis feed rate: 1 - 30,000 mm/min X-axis rapid traverse: 30.00 m/min X-axis feed force: 9,000 N Z-axis feed rate: 1 - 40,000 mm/min Z-axis rapid traverse: 40.00 m/min Z-axis feed force: 10,000 N Tools Number of tools in turret 1: 11 Number of tools in turret 2: 11 Toolholder: VDI 40 MACHINE DETAILS Control: SINUMERIK 840D Total power requirement: 70.00 kW Machine weight: approx. 22.00 t Space requirements: approx. 5.80 x 8.60 x H3.80 m EQUIPMENT Chip conveyor Extraction unit Infeed and outfeed Reversing gripper Nlsdpfjxf A Npjx Ahnof

Condition: used, Pneumatic pick & place manipulator, loading unit similar to SCARA robot. Handling device, handling system, placement gripper, loading gripper for automation. Horizontal axis with guided cylinder linear module type CLM 100-H100 (GEMOTEC column module). Vertical axis with guided cylinder linear module type CLM 100-H50 (GEMOTEC column module). Payload: max. 2 kg Horizontal stroke: 100 mm (pneumatic) Vertical stroke: 50 mm (pneumatic) Nlodsxf Ur Ajpfx Ahnof Vertical adjustment on both support columns: 330 mm (manual, with clamping) Support columns, vertical guide column: Ø 55 mm Mounting base: 175 x 90 mm - Pneumatically traversable in two axes with precise linear guidance - End position dampers - Mounting plate for tool attachment 55 x 65 mm Required space (L x W x H): 320 x 170 x 550 mm Net weight: 16 kg Very good condition Various manipulators available, see our webshop.

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, paper weight (min.): 90 g/m², paper weight (max.): 300 g/m², control type: PLC-controlled, No minimum price – guaranteed sale to the highest bidder! Submission of a bid obligates the buyer to collect the item by 17.10.2025! As the machine is floor-level, removal is straightforward. TECHNICAL DETAILS Output: 1,500 to 9,000 cycles/h Formats Feeder untrimmed: 92 x 128 mm to 311 x 355 mm Final fold: 5 to 25 mm Pre-fold: 8 to 16 mm Cover feeder unfolded: 160 x 128 mm to 622 x 355 mm Cover feeder folded: 89 x 128 mm to 311 x 355 mm Paper weight: 90 to 300 g/m² Trimmer 3-side trim: max. 50 mm 3-knife trim untrimmed: 89 x 120 mm to 305 x 349 mm, max. thickness 10 mm Production range: up to oversize A4 format EQUIPMENT Patented register stop belt for gentle material handling PLC control system 3x Double vertical feeders (DVA) 2 feeder stations on one shaft Modular design for processing with suction or gripper opening Miss-sheet detection on delivery blade Cover feeder UFA HS400 control cabinet Vacuum pump for DVA/UFA DVE Vacuum pump VE Wire spool device DAS20 Transfer mark table Shingled delivery SA Manual single-sheet feeder Staple monitoring from below 2x loop stitching heads: 52-L6 Stapling machine HM100 Universal end stop Miss-sheet collection tray Nledpfxoxb Dvco Ahnsf

Condition: new, Schunk PGN+200 / 1AS universal gripper 371405 + accessory pack 5512049, unused, 100% functional, scope of delivery as per photos Nledpfx Ahjulqkzsnsf

Condition: used, Year of construction: 2016, Overview The filling line for glass bottles (non-refillable and refillable) was in operation at a small brewery in Germany until recently. The line is set up for 0.33l longneck bottles and can fill up to 2,500 bph. The machine is still in operation and can be inspected at any time after consultation. The bottle washer and the unpacker can also be purchased separately.  Technical details  Capacity: 2.500 bph Formats: set up for 0.33l longneck  Filling temperature: 6°C  Packaging:  0,33l Longneck in 24er folding box  0,33l Longneck in 24er modular box Individual machines / line components  New glass lifter | Füllmeister | - | 2016 Filler + capper | H&K | VVF 14/3 | 1966 2016 general overhaul (with pre-evacuation - new rotary ball connection - new stainless steel table - new electrics - new valve control cabinet in stainless steel design - 0.33 liter guide set - Sihi vacuum pump.) Seals on lifting cylinders and filling valves renewed 2023 Vacuum and relief valves fitted with new seals and springs 2023 Bottle unpacker | Joha | - 1982 Packing head for 24 bottles in modular crate  Bottle washer | Silmo | Praktika | 1983 Bottles per row: 12  Label discharger Labeler | Krones | Vinetta | 1999 Type 480-6-3-180      Labelling station for back labels Labelling station for breast labels and neck loops  Three glue pallets and gripper sponges each Glue pallets, gripper sponges and sponge roller at bottle discharge new 2023  Glue pump Krones Unipump-H with glue heater  Packer | Pexco | - | - 1 head for 24 bottles in module box 2016 new electrics installed and machine overhauled  Residual liquid and finish control | Miho | LC2000 | Residual liquid detection from bottle cleaning machine  Control of bottle mouth for crown cork/metal Incl. balancing screen from Silmo for visual control of the cleaned bottles Crate washer | Fleischer | - | -  For cleaning of plastic empty crates, in longitudinal run Module size: 300x400mm  Overhauled in 2016 Compressor | Alup | Allegro 19-10 | 2016  Oil-free 4897 operating hours  Transport Bottle transport: various conveyor belts + 90° bends  Crate transport/ roller conveyor: 2016 overhauled with stainless steel cheeks and feet Nledpel Hx Rpofx Ahnof

Condition: used, mileage: 2,18,160 km, power: 330 kW (448.67 HP), first registration: 05/2017, fuel type: diesel, empty load weight: 16,150 kg, maximum load weight: 9,850 kg, overall weight: 26,000 kg, axle configuration: 6x4, wheelbase: 3,900 mm, brakes: engine braking, color: black, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel, number of seats: 2, loading space volume: 11 m³, loading space length: 4,900 mm, loading space width: 2,420 mm, loading space height: 1,000 mm, Equipment: ABS, additional headlights, air conditioning, cabin, central locking, crane, cruise control, differential lock, onboard computer, parking heater, power assisted steering, seat heater, traction control, trailer coupling, Vehicle location: Bovenden, ClassicSpace, Mercedes PowerShift 3, steel body, Mtlg. House, 1x comfort seat, seat heating, electric mirror, heated mirror, electric window left, electric window right, air conditioning, sun visor, cruise control, air horn, ABS (anti-lock braking system), traction control (ASR), constant throttle, power take-off, differential lock, work lights, rotating beacon, stowage box, leaf spring suspension, left-hand on-board suspension, air+light tow bar, aluminum tank, U-protection, roof hatch, crane at rear, emergency stop, grapple control, high seat, 2-point hydraulic outriggers, 1x hydr. extension, green environmental sticker Wheelbase: 3900 mm Body: Meiller 2-sided tipper body with Bordmatik left approx. 11m³ & rear crane Hiab Jonsered 1300RS79 with high seat, loading height approx. 1540mm. 8t front axle, rear axle disc wheel 300 planetary 13.4t, electronic brake system with ABS and ASR, disc brake with full protection on front and rear axle, ABS can be switched off, parking brake additionally on front axle, condensation water monitoring for compressed air system, stabilizer bar on front axle, stabilizer bar reinforced 2nd rear axle, leather steering wheel. rear axle, leather steering wheel, smoker's package, residual heat utilization, construction site filter, additional thermal insulation, PSM, ClassicSpace, comfort locking system, off-road driving program, Mercedes PowerShift 3, pre-installation for toll collection, tank capacity: 290l, protective plate for tank, LED daytime running lights, High Performance Engine Brake, protective plate under bumper, cyclone pre-filter for coarse dust, transmission oil cooling, Powertrain Pack 1, Protection Pack, Grounder, MB 123-10c MPA N-/M-Speed power take-off. Nledpfx Ahevhmkajnef Load diagram: 4m-2940kg, 6m-2100kg, 7m-1800kg! VIN: WDB96421610141255! Gripper available at an extra charge! ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! - .