Used Haco Ts 3006 for sale (94)

Condition: good (used), functionality: fully functional, Year of construction: 1994, machine/vehicle number: 94094175, sheet thickness (max.): 6 mm, input voltage: 380 V, overall weight: 7,000 kg, total length: 3,500 mm, total width: 2,200 mm, total height: 1,600 mm, HACO TS 3006 Guillotine Shear Dsdox Uymmjpfx Afpjkh - Max. sheet thickness: 600 mm - Max. sheet width: approx. 3200 mm Note: The item can be collected from 16.02.2026 on a date to be agreed. FCA D-73529 Schwäbisch Gmünd – loaded onto truck

Condition: good (used), Year of construction: 2009, sheet width 3050 mm plate thickness 6.0 mm cutting angle adjustment 0.5 - 3.0 ° down holder 18 Stück no. of strokes 8 - 14 Hub/min back stop - adjustable 750 mm work height max. 770 mm Control SP 8 total power requirement 7.5 kW weight of the machine ca. 4800 kg. range L-W-H 3650 x 2100 x 1750 mm very little use (!!) from a maintenance workshop Features - Guide-railed electro-hydraulic guillotine shear - HACO control model NC SP 8 * Easy operation directly at the cutting table Dodpfx Afoxmakgjpokh * Adjustment of cutting angle + backgauge * Retraction function from rear stop * Electric cutting length limitation * Emergency stop button, locking - Motor-adjustable and programmable rear stop - Electric/hydraulic cutting angle adjustment - Manual cutting gap adjustment, from the front - 1x side stop - 1,000 mm, with scale & T-slot - Front finger guard - 1x freely movable foot switch - Rear safety guard + sheet metal chute - Operating instructions (PDF)

Condition: used, functionality: fully functional, Year of construction: 2004, Shear: HACO TS 3006 Working length: 3050 mm Capacity regular steel: 6 mm (400 N/mm²) Back gauge length: 750 mm (motorized) Controller: SP 8 Blade clearance: manual Condition of blades: good Minimum cutting angle: 0.5° Maximum cutting angle: 3° Dkedpfx Afoxy Illspjh Number of hold-downs: 13 Length and number of sheet supports: 8 × 500 mm, 1 × 1000 mm (left stop + measuring bar) Equipped with sheet support device: No Strokes per minute at smallest angle: 10-15 Strokes per minute at largest angle: 6 Working height: 770 mm Motor power: 7.5 KW Total length: approx. 3880 mm Total height: approx. 1700 mm Total width: 1650 mm Weight: approx. 4500 kg Year of manufacture: 2004 Delivery and installation at your location are of course possible; delivery charges and any additional costs in consultation. Since 2019, we have been the Dutch dealer for HACO press brakes and shears. In addition to selling sheet metalworking machines, we offer a complete package for service, maintenance and repairs.

Condition: used, functionality: fully functional, sheet thickness (max.): 6 mm, HACO 3000x6mm hydraulic guillotine shear TS-3006 Brand: HACO Dksdpfx Afewx Ix Sjpeh Model: TS-3006 Power: Three-phase 380V Cutting length: 3,050 mm Cutting thickness: 6 mm Type: Vertical cut, motorized blade angle adjustment (0.5 to 3º) Back gauge: 750 mm (motorized with manual handwheel for fine adjustment) Manual blade gap adjustment via lever at the rear Weight: 4,500 kg Motor: 7.5 kW

Condition: used, Year of construction: 1984, total length: 3,950 mm, total width: 1,950 mm, total height: 2,250 mm, Weight: 8.000 kg - Year: 1984 - Documentation available: No - CE certificate present: No - Serial number: 64 Dodpfx Ajwfpcrjfpskh - Drive system: Conventional - Drive type: Hydraulic - Configuration: Swing-beam - Max. sheet thickness [mm]: 12 - Max. working width [mm]: 3050 - Backgauge depth [mm]: 1000 - Deals (actions): Super deal - Transport dimensions: 3950mm x 1950mm x 2250mm (l x w x h) - Transport weight [kg]: 8000kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: ready for operation (used), sheet thickness steel (max.): 12 mm, power: 22.5 kW (30.59 HP), total length: 4,780 mm, total width: 1,750 mm, total height: 2,150 mm, empty load weight: 11,500 kg, workpiece length (max.): 4,100 mm, Haco TS 4100 x 12 mm CNC Dkedpfx Afeygyxfjpoh Strokes/min: 6 > 10 str/min Adjustable cuttingedge: 0,5 > 3° Number of sheet holders: 23x

Year of construction: 1994, condition: used, Transformer, transformer, converter, three-phase autotransformer, three-phase transformer, three-phase transformer, single-phase transformer, control transformer, safety transformer -Manufacturer: Trafomodern, transformer from press brake HACO PPES 30135 -Type: TS 1.2 -Primary: 220/550V -Secondary: 15-220V -Technical data: see photo nameplate Dkodporgbvvofx Afpoh -Dimensions: 170/150/H180 mm -Weight: 10.6 kg

Condition: used, Year of construction: 1983, sheet width 3050 mm plate thickness 6,0 mm distance between columns 3000 mm cutting angle 0,5 - 3 ° no. of strokes 9 / 14 Hub/min down holder 18 total power requirement 10 kW weight of the machine ca. 4800 kg dimensions of the machine ca. 3750 x 1600 x 1650 mm Features: - Hydraulic / slide-guided sheet metal guillotine shears - Electric backgauge 10-750 mm - Electric cutting angle adjustment - Manual cutting gap adjustment - 1x side stop - Front finger guard Dkedpfovxlpisx Afpoh - Foot switch

Condition: excellent (used), functionality: fully functional, Year of construction: 1989, Haco hydraulic guillotine shear type TS 406 Djdoxwmv Djpfx Afpjkh working width 4050 mm maximum sheet thickness 6 mm motorised back gauge cutting gap adjustment cutting angle adjustment

Condition: excellent (used), Year of construction: 1994, Hydraulic guillotine shear Fab. HACO Typ. HSLX 3000x6/8mm Year 1994 Technical data Make: HACO Type: HSLX 3006 / 8 Year of manufacture: 1994 sheet width: 3050 mm sheet thickness: 6 mm / 8 mm on 1000 mm sheet length Dkedpfx Aelp Nrbofpeh cutting angle: 0.5 - 3 number of strokes: 9/17 drive motor: 11 kW number of hold-downs: 18 pcs. space requirement: approx. 3,7 x 1,7 /additional lay-on arms) x 1,6 mm Machine weight: approx. 6 t Equipment - autom. cutting angle adjustment - Automatic cutting gap adjustment - Cutting line illumination - Support arms - Knife with 4 cutting edges - Cutting length limitation - CNC backgauge 705mm adjustment range 705 mm - angular stop - Instruction manual All data without guarantee. A demonstration under power is possible at any time in our exhibition hall.

Condition: repair required (used), Year of construction: 2015, Manufacturer Haco Machine No. HSLX 3006 Description Hydraulic Shears Replacement Blades Type: HSLX 3006 Manufacturer: Haco Year: 2015 Control: SC 100 Graphic touchscreen Automatic adjustment of cutting gap and cutting angle Programmable cutting length Memory capacity: 500 programs The machine is in good condition and fully operational. The Haco HSLX 3006 is a hydraulic guillotine shear, a machine used in metalworking for cutting sheet metal with precision. These machines are commonly used in various industries, including metal processing and manufacturing. Here are some possible specifications and features of the Haco HSLX 3006 1. Cutting capacity: The "3006" in the model name typically refers to the shear's maximum cutting capacity. In this case, the shear may be capable of cutting materials up to 3 mm thick and 6,000 mm (or 6 meters) long. Dkedst Rh Diepfx Afpjh 2. Hydraulic Operation: Guillotine shears like the Haco HSLX 3006 are powered by hydraulic systems that provide the power required to cut through metal. 3. Precision Cutting: These machines are known for their accuracy and precision, making them suitable for various cutting tasks in metalworking. 4. Backgauge: Many guillotine shears are equipped with a backgauge system that enables accurate and repeatable cuts by controlling the position of the workpiece. 5. Safety Features: Guillotine shears are equipped with safety features to protect the operator, including guards and emergency stop mechanisms. The guillotine shear has been dismantled for 4 years and is stored in a closed warehouse. It also comes with a new set of blades. Unfortunately, the computer/control unit is missing. According to the manufacturer, this will cost €4,000. We would be happy to organize transport for you and also take care of proper loading. The system is open for inspection; it is located in the city of Ptuj, Slovenia.

Condition: used, functionality: fully functional, Year of construction: 2000, overall weight: 4,500 kg, Hydraulic vertical cutting shear Brand: HACO Model: TS 306 Sold by: Casanova Three-phase 380V Dsdpfsxgdlnsx Afpokh Year: 2000 Type: Vertical cutting (blade inclination) Cutting length: 3050 mm Capacity: 6 mm Cutting angle adjustment: 0.5-3 degrees Number of hold-downs: 13 Strokes per minute: 8-14 Squaring arm: 1000 mm Back gauge: 750 mm Motorized back gauge with handwheel for fine adjustment Motor: 7.5 kW Weight: 4500 kg

Condition: like new (used), functionality: fully functional, Year of construction: 2019, HACO TS 2006 in very good condition Working length: 2050 mm Capacity (mild steel): 6 mm (400 N/MM²) Backgauge length: 750 mm Control: SP-9 motorized backgauge with digital readout Blade clearance: manual Condition of blades: good Minimum cutting angle: 0.5° Maximum cutting angle: 3° Number of hold-downs: 18 Length and number of sheet supports: 5 x 500 mm, 1 x 1500 mm, side stop 1500 mm with ball rollers included Equipped with support system: No Working height: 770 mm Motor power: 7.5 KW Total length: approx. 2800 mm Total height: approx. 1660 mm Dsdpfx Afsxpm Iqepokh Total width: 1905 mm Weight: approx. 3500 kg Year of manufacture: 2019 Delivery and installation at your location is possible, with delivery and additional costs to be discussed. Since 2019, we have been the official Dutch dealer for HACO press brakes and guillotine shears. In addition to sheet metal machinery sales, we offer a complete package of services for maintenance and repairs.

Condition: new, Year of construction: 2026, control type: CNC control, overall weight: 4,500 kg, HACO hydraulic guillotine shear, GSX model Brand new machine This series offers several models for sheet metal working, from 2 to 4 m in length and 6 to 13 mm in thickness. Equipped with SC200 touchscreen CNC control Ball transfers on the sheet support table Options: Dodpfx Asxay U Ejfpekh Sheet holding system Sheet return system to the front Retractable rear stop Finger protection via light barrier Sheet clamps with plastic tips Full table with ball transfers

Condition: excellent (used), sheet thickness steel (max.): 4 mm, power: 7.5 kW (10.20 HP), overall weight: 4,500 kg, cutting length (max.): 3,000 mm, HACO hydraulic guillotine shears type TS 3m x 4mm Dkedetz Shtspfx Afpjh Manual backgauge New 4-cut stainless steel blades

Condition: new, functionality: fully functional, New and used controllers for press brakes. For replace, spare parts and retrofitting. Cybelec Cybtouch8, Cybtouch 12, Modeva Pac 15 TP10S, E21 Estun, E22 etc. Other types on request. We can buy your tired press brake for spare parts. Dkjdpfx Afjx Hkrwopjh

Condition: used, functionality: unexamined, control type: NC control, actuation type: electric, Spare parts for early-model press brakes that were no longer needed during modernization. They are in good condition and can be reused in similar systems. These include CNC controllers, X- and Y-axis servo drivers, R- and Z-axis servo drivers, electric motors and encoders, and various circuit boards. Any individual parts are also available for purchase. Identification via photo and serial number. We can also purchase your faulty or unwanted press brake. Dkodpfx Aox Ed H Ajfpsh

Condition: used, functionality: unexamined, For press brakes: Used servomotors of various types, encoders, linear scales, servodrivers. Please specify the type and send photos. We will buy your worn press for spare parts. Dsdex Dr U Ejpfx Afpokh

Condition: used, functionality: unexamined, Servo drives for press brakes. Used condition, removed from operational machines. Untested. Please request further details and photos. Dedpfjx Dr Daox Afpskh We can purchase your faulty press brake.

Condition: new, Year of construction: 2026, 3050 mm 12,0 mm 0,5-3,0 ° 1000 mm table height 930 mm work height max. 930 mm Dksdpfsxpi Dhex Afpoh

Condition: excellent (used), functionality: fully functional, Year of construction: 2014, control type: NC control, actuation type: hydraulic, sheet thickness (max.): 6 mm, back gauge adjustment: motor-driven, back gauge travel distance Z-axis: 600 mm, pressure (max.): 310 bar, hydraulic flow rate: 25 l/min, Cutting length: 3200 mm Cutting thickness at 45 kg/mm²: 6 mm Dkodpfxjxz Aa Ho Afpoh Cutting thickness at 60 kg/mm²: 4 mm Blade gap adjustment: included Backgauge travel: 600 mm Year: 2014

Condition: new, Year of construction: 2024, 3050 mm 06,5 mm Dkedpfjwp Tfrox Afpjh 0,5-2,5 ° 1000 mm

Condition: used, Year of construction: 2009, total length: 5,500 mm, total width: 2,300 mm, total height: 2,900 mm, Weight: 18.700 kg Price: On request - Year: 2009 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 83261 - Drive system: CNC - Control system brand: HACO - Control system type: BC59T Graphics - Number of axes [pcs]: 6: Y1+Y2+X+R+Z1+Z2 - Press force [ton]: 250 - Max. working width [mm]: 4300 - Column gap [mm]: 3800 - Backgauge depth [mm]: 1000 - Crowning system: CNC-controlled - Punch holder: Quick-release - Options: Finger safety guard - Transport dimensions: 5500mm x 2300mm x 2900mm (l x w x h) - Transport weight [kg]: 18700kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Bram van Summeren Dkodjxrl Hdspfx Afpsh

Condition: good (used), Year of construction: 2001, 3-Axis Hydraulic CNC Press Brake with CNC Control HACO-Robosoft ATS 590 Graphic and CE Compliance Manufacturer: HACO, Origin Belgium Model: ERMS 40135 Year of manufacture: 2001 / Refurbished in 2008 with ATS 590 Graphic Technical Data: Press force 135 t Bending length 4000 mm Dimensions (L x W x H) approx. 4500 x 1600 x 2430 mm Weight 10,500 kg Accessories / Special Features: • 3-axis CNC control HACO ATS 590 Graphic Y1 + Y2, X, R for stroke depth and backgauge forward/backward + up/down • 3 backgauge fingers can be manually adjusted together/apart • CE-compliant with single working speed • Hydraulic parallel control • Manual table crowning adjustable via hand crank under the die, with SIKO counter • Divided top tools Dksdpfox Npiyjx Afpeh • Continuous universal die with 4 different V-openings up to max. V = 40 mm • Additional divided top and bottom tools • Busbar • Tool holder system "PROMECAM" • 2 support arms • Fast, precise, and easy to adjust • Foot switch and emergency stop • Electrically secured safety doors • 1 working speed, fast return stroke • CE compliant Delivery time: immediately from stock Dortmund, loaded free on truck Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: excellent (used), Year of construction: 2011, pressure 100 t chamfer lenght 2250 mm distance between columns 2050 mm Stroke beam 275 mm max. opening beam/table 410 mm C-recess 300 mm max travel X-axes 550 mm Z1+Z2 axes controlled by cnc manuell, 4 Anschlagfinger mm max. distance R-axes 130 mm Quick speed,inspeed 100 mm/sec bendingspeed 0-10 mm/sec opening speed 100 mm/sec Number of working hours 13000 h length 3500 mm width 2000 mm height 2600 mm weight 5700 kg total power requirement 9 kW dimensions of the machine ca. 4x2x2,7 m All machines can be viewed under power at all times. Demonstrations of the machines possible at any time. All machines can be inspected at any time under power and demonstrations of the machines are possible at any time. Light barrier protection front motorized adjustable (Fissler) Rear Sick light barrier protection Manual crowning Promecam tool holders Djdevzcm Depfx Afpokh