Used Guide Fence for sale (5,451)

Condition: excellent (used), CATALOG NUMBER 7762 TECHNICAL DATA THICKNESSER: - shaft width: 320 mm - 3-knife planer shaft - max thickness of the processed element: 180 mm - thicknesser shaft guard - from above: – anti-kickback fingers – feed shaft, toothed – planer shaft – outfeed shaft, smooth, feed CIRCULAR SAW: - max blade diameter: 300 mm - max cutting height: 80 mm - blade bore diameter: 30 mm - adjustable blade up/down - cutting width with fence: 270 mm - table dimensions: 750x460 mm - fence SPINDLE MOULDER: - spindle diameter: 30 mm - adjustable spindle up/down - spindle height: 100 mm - fence - extraction port diameter: 100 mm - dimensions (LxWxH): 1700x2400x1100 mm - weight: 340 kg ADVANTAGES Bwedpfx Aozx Sf Hebtot – Bulgarian production – Very good condition – Multi-function, used Net price: 6,900 PLN Net price: 1,640 EUR at exchange rate 4.2 EUR (Prices may vary with larger fluctuations)

Condition: used, Year of construction: 2025, Overview This fully automatic KEG cleaning and filling system from ATS Wibbing GmbH, built in 2025, is consisting of an external KEG washer (AW 75), a KEG cleaning and filling machine (HRF 101), as well as a complete supply and transport system. The system is designed for the processing of a wide range of KEG formats. With an output of approx. 30–35 KEG/h, the installation is suitable for small and medium-sized breweries or beverage producers. The line is equipped with a Siemens S7-1500 control system and touchscreen HMI, allowing fully automatic operation with guided user interface. The scope includes a complete transport system, supply tanks with dosing and conductivity measurement, as well as all required piping between the machine and media tanks. The system is offered with 2 years manufacturer warranty and is available within approximately 2-3 months. The attached project layout drawing illustrates the complete system arrangement including KEG washer, cleaning/filling machine, conveyor sections, pallet handling aid, supply station, and expansion vessel. Technical Data - Manufacturer: ATS Wibbing GmbH - Machine Type: Fully automatic KEG cleaning and filling line - Main Components: ATS external washer AW 75, ATS cleaning and filling machine HRF 101, Supply and transport system - Year of Manufacture: 2025 - Availability: approx. 2-3 months - Capacity: approx. 30 – 35 KEG/h - Suitable KEG Formats: Stainless steel KEGs, Plus-KEGs, Party-KEGs, Containers, Diameter range: 160 – 420 mm, Height range: 280 – 600 mm - Control System: Siemens S7-1500 - HMI: Touchpanel with operator guidance - External Washer AW 75: Indexed pass-through operation, Circulation bath approx. 270 l, Spray pump 2.2 kW, Bag filter with pressure monitoring - Cleaning & Filling Machine HRF 101: Stainless steel control cabinet, Fully automatic cleaning and filling process - Transport System: Roller conveyor and chain conveyor sections, Complete electrical and sensor equipment, Cable trays included Bodpfx Abey Rk Igstewt - Supply System: 4 stacked tanks (150 l each, 120 l usable volume), 3 tanks with heating, Stainless steel pumps, Temperature control and dry-run protection, Temperature and level indication, 2 conductivity measurement systems with dosing pumps, Complete piping between machine and tanks, Pressure and temperature monitoring for product, CO2, sterile air, and steam, Separate control cabinet - Expansion vessel 150 l - Pallet handling aid - Required Utilities: Sterile air: approx. 3 bar, Working air: approx. 6 bar, CO2: approx. 2–3 bar, Steam: max. 3 bar, Water supply: min. 50°C - Warranty: 2 years manufacturer warranty

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, turning length: 196 mm, turning diameter over cross slide: 130 mm, spindle speed (min.): 6,000 rpm, bar diameter (max.): 36 mm, overall weight: 1,900 kg, Equipment: documentation/manual, Yamazaki Mazak QT-6T CNC Turning Center – Excellent Condition We offer for sale a well-maintained Yamazaki Mazak QT-6T CNC Turning Center, manufactured in Japan and kept in excellent mechanical and operational condition. The machine is currently under power, in production, and available for inspection and testing upon appointment. Machine Information - Manufacturer: Yamazaki Mazak - Model: Quick Turn QT-6T - Year of Manufacture: 1999 - Serial Number: 39178 - Country of Origin: Japan - CNC Control: Mazatrol - Configuration: 2-Axis CNC Turning Center (X / Z) - Machine Weight: Approx. 1,900 kg Main Features - 6" Chuck - Collet Chuck - Complete Set of Collets Included - Bar Capacity up to 36 mm - 8-Station Turret - Tool Eye (Automatic Tool Measurement System) - Automatic Parts Catcher - Coolant System - Fully Operational Included Equipment - Fedek Bar Feeder - Bar Feeder Length: 1.5 m - Pneumatic Bar Pushing System - 6" Chuck - Collet Chuck - Complete Set of Collets - Full Set of Tool Holders - Original Manuals and Documentation - Various Accessories Additional Equipment Included The machine is supplied with the complete set of spindle protection plastic tubes (bar guide tubes), allowing safe operation with bar stock and minimizing vibration, noise, and bar whipping during spindle rotation. This contributes significantly to machining stability, surface finish quality, and spindle protection when running long bars. Technical Specifications - Maximum Turning Diameter: Approx. 130 mm - Maximum Turning Length: Approx. 196 mm - Spindle Bore: Approx. 45 mm - Maximum Spindle Speed: Up to 7,000 rpm - Bar Capacity: 32–36 mm - X-Axis Travel: Approx. 80 mm - Z-Axis Travel: Approx. 200 mm - Rapid Traverse X/Z: Up to 30 m/min Condition ✔ Excellent mechanical condition ✔ Regularly maintained ✔ Machine under power ✔ Ready for immediate production Bwsdpszal Rasfx Abtjt ✔ Inspection and test run possible ✔ All manuals and documentation available Additional Information This machine is offered as a complete production package and is ideal for precision machining of bar stock, small and medium batch production, and high-accuracy turning applications. The machine comes with extensive tooling, collets, holders, automatic tool setting, automatic parts catcher, bar feeder, and spindle guide tube system, allowing immediate integration into production with minimal additional investment. Loading assistance is available. Videos of the machine running can be provided upon request.

Condition: used, Year of construction: 2008, Manufacturer: Fritz Müller Machine type: Hydraulic drawing press Type: BZE 1200 – 35.1.1 Year of manufacture: 1972 General overhaul: 2008 Total drawing force, press ram: 1,000 – 12,000 kN Drawing force: 7,000 kN Holding force per cylinder: 200 – 1,250 kN Ram surface area: 3,500 × 2,200 mm Max. ram stroke: 1,330 mm Max. drawing depth: 430 mm Distance, table – holding cylinder, top dead center: 2,700 mm Distance, table – holding cylinder, bottom dead center: 1,420 mm Distance, table – ram, top dead center: 2,500 mm Distance, table – ram, bottom dead center: 1,200 / 1,600 mm Bjdpfxsy Ndz Re Abtowt Hydraulic table cushion, one-piece: Displacement force: 800 – 2,500 kN Stroke: 0 – 300 mm Cushion surface area: 2,700 × 1,200 mm Table clamping surface: 3,500 × 2,200 mm Clear width between guides: 3,550 mm Max. tool weight: 32 t Max. plate width: 2,200 mm Max. plate length: 1,600 mm Sheet metal thickness: 0.5 – 2.5 mm Feeding height above table: 650 – 900 mm Max. single part weight: 40 kg Max. stack height: 450 mm Max. weight per plate stack: 4.5 t Single or double plate feeding possible Electronic double sheet control available Rapid descent speed: max. 500 mm/s, unregulated Working speed: 30 – 115 mm/s Return speed: 30 – 600 mm/s Documentation: No digital data available Drawings: Partially available as ink drawings; on-site inspection possible Packing lists: No packing lists with individual weights available

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, cutting width (max.): 1,100 mm, saw blade diameter: 600 mm, height adjustment type: electric, rotational speed (max.): 2,900 rpm, Equipment: saw blade guard, Cutting length: 6200 mm Cutting width: 1100 mm with electrically adjustable fence Cutting height: 195 mm Bjdpfxezcuzgo Abtswt Motor power: 11 kW Saw blade speed: 2900 rpm Infinitely variable feed speed adjustment: 1–80 m/min Two laser guides 6-position cutting height adjustment Two pneumatic clamps Year of manufacture: 2010

Condition: excellent (used), CATALOGUE NUMBER 8034 TECHNICAL DATA - max. width of workpiece – upper roller: 510mm - max. width of workpiece – lower roller: 450mm - max. thickness of workpiece, 2-sided: 200mm – from the top: - ejectors - 1 toothed metal feed roller - 2 metal feed rollers, sequential - 1 toothed metal feed roller - pressure roller - 510mm planing roller, 4 knives, with the possibility of fitting profile knives, approx. 7.5kW - pressure roller - smooth metal feed roller - upper pressure roller at the outlet with 2 rubber feed rollers – from the bottom: - adjustable infeed table with guide - smooth, metal, sliding roller - 450mm planing roller, 4 knives, 7.5kW - 2 smooth metal feed rollers – from the back: - 2 side spindles Bsdpfozu R Thjx Abtewt 1) vertical, right, 200mm, 6.6kW 2) vertical, left, 200mm, 6.6kW - spindle diameter: 40mm - 2 heads included - spindles adjustable up/down, left/right - axes arranged alternately - electric height adjustment - 2 types of feed speed + stepless 5-13, 13-36m/min - diameter of dust extraction nozzle: 2x125mm, 145mm, 130mm - dimensions (L/W/H): 3200x1740x1650mm + control unit - weight: 2100kg ADVANTAGES – Made in Portugal – Electric table lifting – Ideal for processing wet and dry wood – 2 planing rollers + 2 spindles – Very good condition – Used planer Net price: 48900 PLN Net price: 11643 EUR, depending on the exchange rate of 4.20 EUR (Prices may vary due to higher fluctuations)

Condition: excellent (used), Catalogue number 7807 TECHNICAL SPECIFICATIONS - Track width: 350mm - Cutting width: 350mm - Blade diameter: from 355 to 505mm - Cutting height: 10-170mm - Spindle diameter: 80mm - Table dimensions: 1900x790mm - Height from base to table: 830mm Bodpfxjzwwvze Abtowt From above: - 2 rows of pawls/kickers - 2 smooth, metal glide rollers - Shaft with saw blades - 2 pressure glide rollers From below: - Guide bar - Pawls/kickers - Track - Electric height adjustment of the body - Central lubrication - Stepless speed adjustment via inverter - Feed motor: 4kW - Main motor: 75kW - Extractor spigot diameter: 2x150mm - Overall dimensions (L/W/H): 2050x1800x1800mm - Weight approx.: 3500kg FEATURES - German-made - DTR technical documentation - Used multi-blade saw - Very good condition Net price: 58,900 PLN Net price: 14,000 EUR depending on exchange rate 4.2 EUR (Prices may change due to stronger exchange rate fluctuations)

Condition: used, Available quantity: 4 units Manufacturer: MÜLLER Type: ZE 800-35.1.1 Year of manufacture: 1969 General overhaul: 2008 Pressing force: 8,000 kN Pulling force, press ram: 8,000 kN Ram stroke: 1,100 mm Ram surface area: 3,500 × 2,200 mm Max. dimension at the hydraulic clamps: 2,040 mm Hydraulic table cushion, one-piece: Displacement force: 250 – 2,500 kN Stroke: 85 – 300 mm Cushion surface area: 2,700 × 1,500 mm Hydraulic ram cushion, unregulated: Displacement force: 100 – 1,000 kN Stroke: 150 mm Cushion surface area: 2,400 × 1,500 mm Distance, table – ram TDC: 2,200 mm Distance, table – ram BDC: 1,100 mm Table clamping surface: 3,500 × 2,200 mm Clearance between guides: 3,550 mm Max. tool weight: 32 t Equipment: Punch impact damper Speeds: Rapid descent speed: max. 500 mm/s, unregulated Working speed: 5 – 140 mm/s Return speed: 30 – 420 mm/s Operating modes, table cushion: Return without locking, followed by ejection Return with locking and delayed ejection Operation with the pull cushion deactivated is possible Documentation: No digital data available Drawings: Partially available as ink drawings; on-site inspection possible Bwedpfx Abjzw Nq Dstst Packing lists: No packing lists with individual weights available

Condition: excellent (used), CATALOG NUMBER: 7081 TECHNICAL SPECIFICATIONS - JOINTER: - Shaft width: 260 mm - Table length: 1190 mm - Cast iron fence, angle adjustable - Adjustable tables - THICKNESSER: - Max workpiece thickness: 110 mm - Thicknesser shaft guard - From above: - Anti-kickback fingers - Toothed feed roller - Planing shaft - Smooth outfeed roller - Extraction port diameter: 85 mm - CIRCULAR SAW: - Max blade diameter: 160 mm - Cutting height: 25 mm - Blade bore diameter: 30 mm - Blade height adjustable (up/down) - Blade guard - Cutting width with fence: 160 mm - Table dimensions: 710 x 420 mm - SPINDLE MOULDER: - Spindle diameter: 30 mm - Spindle height adjustable (up/down) - Spindle height: 110 mm - Max tool diameter: 190 mm - Fence - Motor approx. 2.2 kW - Dimensions (L/W/H): 1200 x 900 x 800 mm Bedpfx Aozxg Iiobtewt - Weight: 325 kg ADVANTAGES - Compact, takes up little space - Very good condition - Used multifunctional machine Net price: 7,900 PLN Net price: 1,880 EUR (based on 4.2 EUR/PLN exchange rate) (Prices are subject to change due to currency fluctuations)

Condition: excellent (used), Catalogue number 7834 TECHNICAL DATA - Maximum diameter of main blade without scoring unit: 400mm - Maximum blade diameter with scoring unit: 350mm Bwodpezxhhdsfx Abtot - Maximum cutting height for 350mm blade: 100mm - Main blade adjustable up/down and tiltable - Large blade guard - Spindle diameter: 30mm - With sliding table - Cutting length on sliding table: 1400mm - Cutting width at fence: 1180mm - With side table - Fence on side table adjustable at an angle - With scoring unit - Maximum scoring blade diameter: 120mm - Spindle diameter: 20mm - Main blade motor power: 4kW - Scoring unit motor: 0.75kW - 2 rotation speed settings - Table dimensions: 1120x1020mm - Table dimensions with extension: 1820x1720mm - Extraction nozzle diameter: 130mm - Dimensions L/W/H: 3650x2150x1450mm - Weight: 720kg ADVANTAGES – Made in Poland – With scoring unit – DTR technical documentation – Used saw, in very good condition Net price: 11,900 PLN Net price: 2,840 EUR (depending on the rate 4.2 EUR) (Prices may vary with significant rate fluctuations)

Condition: excellent (used), CATALOG NUMBER: 7947 Technical specifications: - Track width: 300 mm - Shaft working width: 300 mm - Max. saw blade diameter: 350 mm - Saw blade bore diameter: 70 mm - Max. cutting height: 120 mm - Table width with extension: 750 mm Bwsdpfxozw Dw So Abtst - Table length: 1540 mm – From above: - Kickback barriers (anti-return block for material) - Metal roller guide - Kickback barriers - Metal roller guide - Shaft with saw blades - 2 smooth metal idler rollers – From below: - Guide rail - Kickback barriers - Track (caterpillar) - Central track lubrication - Stepless feed speed adjustment - Feed motor: 1.5 kW - Main motor: 37 kW - Extraction port diameter: 200 mm - Overall dimensions (L/W/H): 1800x1550x1500 mm - Weight: approx. 1700 kg Advantages: – Italian manufacture – Very good condition – DTR technical documentation – Used multirip saw Net price: PLN 33,900 Net price: EUR 8,070 (based on EUR/PLN 4.2) (Prices may change with significant exchange rate fluctuations)

Condition: ready for operation (used), Year of construction: 2025, operating hours: 600 h, spindle speed (max.): 3,500 rpm, travel distance X-axis: 225 mm, travel distance Y-axis: 100 mm, travel distance Z-axis: 800 mm, spindle motor power: 18,500 W, total height: 2,365 mm, total width: 2,085 mm, overall weight: 8,900 kg, controller manufacturer: FANUC, controller model: 0iTF PLUS, product length (max.): 4,210 mm, number of axes: 5, This 5-axis Leadwell LTC-25iSMY was manufactured in 2025. It features a maximum turning diameter of 590 mm and a turning length of 770 mm. The machine is equipped with a powerful spindle speed of 3500 rpm and a robust tool head with 12 positions. If you are looking to get high-quality turning capabilities, consider the Leadwell LTC-25iSMY horizontal turning machine we have for sale. Contact us for further details regarding this machine. • Capacities • Max. turning diameter above the bed: 590 mm • Max. turning diameter above the transverse support: 590 mm • Max. turning diameter: 430 mm • Max. turning length: 770 mm • Max. rod diameter: 78 mm • Max. workpiece weight: 39 kg • Axes and travels • Z2 (counterspindle) travel: 780 mm • Min. C1 axis positioning increment (main spindle): 0.001 Bwodszw D Dropfx Abtst • Min. C2 axis positioning increment (counterspindle): 0.001 • Main spindle • Chuck size: 254 mm • Spindle taper: A2-8 • Spindle bore: 89 mm • Spindle drive type: Fanuc A P30/6000i • Counterspindle • Max. speed: 4000 rpm • Chuck size: 210 mm • Taper: A2-6 • Max. rod diameter: 66 mm • Power: 15 kW • Spindle drive type: Fanuc A 12/7000i • Turret / tooling (EWS tool head) • Clamping system diameter: BMT65 • Number of positions: 12 • Max. external tool size: 25 x 25 mm • Max. internal tool clamping diameter (threading): 40 mm • Neighbor tool change time: 0.8 s • Max. tool change time: 1.3 s • Max. speed of driven tools (axial): 4000 rpm • Max. speed of driven tools (radial): 4000 rpm • Rotary tool drive power: 4.5 kW • Rapid feeds • X: 15,000 mm/min • Z: 20,000 mm/min • Y: 7,500 mm/min • Z2 (counterspindle): 20,000 mm/min • Control • Fanuc 0iTF PLUS with 15" LCD, Manual Guide i, Ethernet • Machine input: 65 kVA Additional equipment • Collet clamping • Hydraulic chuck 254/3 (10"), bar max Ø77 mm, 3500 rpm • Renishaw HPMA tool probe (motorized arm) • High-pressure coolant 20 bar through tool head • Workpiece blow-off nozzle above main spindle • Workpiece blow-off nozzle above counterspindle • Cassette chip conveyor with chip container • Counterspindle with chuck 203/3 • Workpiece removal shovel with container • Preparation/interface for bar feeder • Beacon alarm (machine status light) • Oil separator for coolant emulsion (from lost lubrication) • 3 pcs axial rotary unit BMT65 • 3 pcs radial rotary unit BMT65 • 4 pcs double-sided holder for external turning BMT65 • 4 pcs double-sided holder for internal turning BMT65 • 1 pc single-sided holder for internal turning • Filtermist extraction FX5002 Technical Specification Counter Spindle Yes Driven Tools Yes

Condition: used, Year of construction: 2020, Overview Bodpfx Aezw Em Uobtewt This Gronemeyer VFA is a vertical conveyor for glass bottles, built in April 2020 by Gronemeyer Maschinenfabrik GmbH & Co. (Höxter, Germany). It raises bottles between the levels of a filling line and works with two synchronously running endless chains whose carrier elements take the bottle from both sides, so the container is guided upright over the whole climb. The nominal capacity is 45,500 bottles per hour at a conveying speed of approximately 60 m/min. The conveying width is set by hand crank across a range of 20 to 150 mm, so a format change needs no tooling. The machine is enclosed in transparent guarding, has service doors with safety switches, an automatic central lubrication system and a pneumatic chain tensioning station. It is currently being dismantled and can be inspected at BEVMAQ's warehouse in Germany from early September 2026. Technical data - Manufacturer: Gronemeyer Maschinenfabrik GmbH & Co. (Höxter, Germany) - Model: VFA - Year of manufacture: Machine type: vertical bottle conveyor with two carrier chains, side grip - Product: glass bottles, Ø 68.8 mm, height 228 - 248 mm - Nominal capacity: 45,500 bottles/hour - Conveying speed: approx. 60 m/min at 50 Hz - Speed range: approx. 24 - 104 m/min at 17 - 87 Hz - Width adjustment: 20 - 150 mm, manual by hand crank - Carrier chain: type LF 114 SS - L2 NK, 114.3 mm wide, 30.48 m - Drive motor: SEW, 2.2 kW, 230/400 V, 50 Hz, IP 56, suitable for inverter operation - Gearbox: Stöber, ratio i = 9.31 - Compressed air: 6 - 10 bar, 1/8" connection - Central lubrication unit: 230 V, 50 Hz, 0.75 A - Overall height: approx. 4,185 mm - Operating environment: enclosed rooms, 5 - 40 °C Equipment - Pneumatic chain tensioning station - Automatic central lubrication system - Transparent protective guarding around the conveyor section - Service doors with RSS36 safety switches - Hand crank for width adjustment - Original Gronemeyer documentation: operating manual, installation drawing, gearbox, motor and lubrication system documents Condition Used - currently being dismantled; from early September 2026 it can be inspected in dismantled condition. Scope of supply and spare parts are agreed during the offer stage. Availability From early September 2026. Location: BEVMAQ warehouse, Germany. Loading by arrangement.

Condition: good (used), Year of construction: 2014, Overall dimensions: 12.4 x 18.8 m incl. safety fencing Bwodpfx Abozvnk Hotet Number of baskets per oven: 2x 1,170 x 1,150 x 2,000 mm Reference load weight (net/gross): 1,285 / 2,185 kg Max. load weight (net/gross): 2,000 / 2,700 kg Load: 2,050 x 1,150 x 2,800 mm, external dimensions: 2,950 x 6,400 x 7,800 mm Max. temperature: 600 °C Operating temperature: 510 °C Total heating capacity: 2 x 81 kW = 162 kW electric Quenching water bath: Type = QT-24.16.57/71E Temperature bath max.: 70°C, chamfering volume = 20 m^3 2 ageing furnaces: Type = ADBF-24.16.30/250E External dimensions: 2,800 x 4,850 x 4,000 mm Oven temperature max.: 250°C Operating temperature: 180 °C Total output: 2x 40.5 kW = 81 kW Electrical storage/retrieval section, Gea cooling coil, protective housing, safety equipment, system control 1,056 annealing baskets with stanchion pallets System already dismantled, packed and stored

Condition: good (used), Year of construction: 2011, functionality: fully functional, Press force: 36 t Bending length: 1020 mm Distance between uprights: 932 mm Overhang: 150 mm Stroke: 120 mm Usable installation height: 295 mm Y-axis working speed: 10/25 mm/sec Y-axis rapid traverse: 220 mm/sec Working height: 1150 mm Machine weight approx.: 2,600 kg Space requirement approx.: 1805 x 1330 x 2380 mm TruBend 7036 Cell Edition Standard equipment: TruBend 7036 Cell Edition: - Electromechanical direct drive (torque motor) - Rear stop system with 6 axes and stop sensors - Positionable Wila tool clamping system - Control cabinet air conditioning BendMaster: - Stable base and manipulator - Load capacity 15 kg, max. sheet weight 3 kg - Floor-mounted track, welded construction with stable guide rail - Travel range 3215 mm - Gripper coupling on the BendMaster - Electric drives - Tongs with jaws LoadMaster Bend: - Handling system - Multi-suction device - Double sheet detection and singulation - Transfer system - System pallet Safety: - Protective enclosure with pivoting sliding doors Control: - PC control with 19" touchscreen - Mobile operating terminal Bwodpfx Aozwla Uobtot - Network connection - Remote service via the Internet

Condition: excellent (used), CATALOG NUMBER: 7480 Bodpfjzulzmex Abtewt Technical data: - Track width: 360mm - Shaft width: 350mm - Max. blade diameter: 350mm - Blade bore diameter: 80mm - Max. cutting height: 120mm - Table size: 2040x1220mm From above: - Pawls - Driving/sprocket shaft - Pawls - Shaft with saw blades - Sliding, pressure shaft From below: - Rollers in front of the table, 2 pcs - Guide - Pawls - Track - Central track lubrication - Electric height adjustment of saw blade shaft - Electric height adjustment of the body - Stepless feed speed control - Extraction outlet diameter: 140mm, 160mm - Main motor: 30kW - Overall dimensions (L/W/H): 2600x2300x1850mm - Weight: approx. 4000kg ADVANTAGES – Czech production – Used multirip saw – Very good condition Net price: 30,900 PLN Net price: 7,360 EUR (depending on EUR exchange rate of 4.2) (Prices may change with large fluctuations)

Condition: excellent (used), CATALOG NUMBER 7901 Technical specifications: - track width: 300mm - working width of roller: 300mm - max saw blade diameter: 350mm - saw blade bore diameter: 70mm - max cutting height: 120mm - table width with extension: 750mm - table length: 1530mm - from above: - kickback prevention barriers (safety barrier against material reverse) Bwodpfx Abjzul Akstjt - metal sliding roller - kickback prevention barriers - metal sliding roller - shaft with saw blades - 2 smooth metal sliding rollers - from below: - guide rail - kickback prevention barriers - track - central track lubrication - stepless feed speed adjustment - feed motor: 1.5kW - main motor: 22kW - brake - suction nozzle diameter: 200mm - overall dimensions (L/W/H): 2300x1370x1570mm - weight approx.: 1700kg ADVANTAGES – Italian manufacturing – very good condition – technical DTR documentation – used multi-blade saw Net price: 32,900 PLN Net price: 7,830 EUR (calculated at 4.2 PLN/EUR) (Prices may change with significant exchange rate fluctuations)

Condition: good (used), Code: 0177 Brand: NARDELLO - ITALY Model: SOTOS - CE Standard Cross cutting panel saw for postforming tops, edged and non-edged panels. Suitable for companies producing furniture, kitchens, bathroom furniture, furnishings, panels, and various - CE Standard Blade carriage unit: The blade carriage slides on linear guides with spheres blow-by and it is controlled by a brushless motor. Scoring unit group, whih is controlled by a brushless motor, allows to cut postformed edges and also special workings, which increase productivity of the machine. Pliers group and/or rear positioner are controlled by brushless motor and slide on linear guides with spheres blow-by. Cycles check-out is made by Numerical Control. Technical characteristics: Cutting width 1500 mm Cutting height 100 mm Main blade motor 7,5 Hp (5,5 Kw) Rotating speed 4000 Main blade diameter 300-400 mm Scoring blade motor 2,5 Hp (1.8 Kw) Scoring unit rotating speed 5000 rpm Scoring unit blade diameter 220-300 mm Bwsdpfx Abew Dfnhstot Saw carriage forward speed 0-60 m/1' Saw carriage return speed 40-70 m/1' Positioner speed 0-25 m/1' Positioner return speed 40-60 m/1' Weight 2000 kg

Condition: like new (used), functionality: fully functional, planing width: 400 mm, tool diameter: 120 mm, number of blades: 4, actuation type: electric, rotational speed (max.): 5,000 rpm, Griggio PF 400 Planer! Small, 4-knife, stable! SUPER Manufacturer! Italian, in excellent condition! Griggio PF 400 Planer! Small, 4-knife, stable! SUPER Manufacturer! Perfect condition! TECHNICAL SPECIFICATIONS: - Table length 2500 mm - Working width 400 mm - 4 traditional knives - 3kW motor - Shaft RPM 5000 - Shaft diameter 120mm - Both tables adjustable - Stable, solid fence - Shaft noise reduction system Machine dimensions: - Length 250 cm - Width 70 cm - Height 100 cm - Weight 550 kg WE ORGANIZE TRANSPORT WHERE CAN YOU SEE OUR MACHINES? JBS WOODWORKING MACHINERY WOLICA DRUGA 26 23-310 MODLIBORZYCE jbsmaszyny.pl We have the following machines: band saws, circular saws, crosscut and miter saws, thicknessers, planers, sanders, horizontal and vertical drilling machines, feed systems, sharpening machines, four-sided planer, 4-sided, 3-sided, three-sided, two-sided, thicknesser, planer, sander, jointer, planer-jointer, planer-thicknesser, jointer-thicknesser, cleaning machine, mortiser, dowel machine, parquet machine, trimming machine, rounding machine, for log homes, milling machine, milling machines, spindle down, spindle up, top, bottom, sanders, wide belt, narrow belt, throughfeed, cylindrical, disc, angle, planer, drill, drills, horizontal, radial, milling machine, multi-spindle, edge banders, edge banding machine, veneer machine, press, presses, lathes, log splitters, briquetting machines, briquette machine, chippers, chipper, wood chipper, boring machine, boring machines, dust extraction, dust collectors, extractor, extractors, fan, fans, sharpener, sharpeners, compressor, compressors, sharpening machines, multi-functional. Bjdpfx Aozx A Ncobtewt

Condition: used, functionality: fully functional, CKR compact module with ball rail system and toothed belt drive Pre-tensioned toothed belt Intelligent toothed belt guide protects internal components Repeatability up to ± 0.05 mm Dimensions: Bwedpfxjwa Rz Sj Abtjt Total length: 3135 mm Track length: 3000 mm Width 145 mm Height: 65 mm Connecting plate length: 200 mm Connecting plate width: 145 mm

Condition: excellent (used), Catalog number: 8094 TECHNICAL DATA - track width: 300mm - shaft width: 300mm - max cutting height: 120mm - max blade diameter: 350mm - blade bore diameter: 70mm Bwedpfxezx U Iqs Abtot - from above: - 2 rows of pawls/ejectors - smooth, sliding pressure shaft - pawls/ejectors - pressure - shaft with saw blades - pressure - smooth, sliding pressure shaft - from below: - guide - pawls/ejectors - track - 1 feed speed + stepless - main motor power: 22kW - feed motor: 2kW - central lubrication - laser - extraction nozzle diameter: 250mm - table dimensions (length/width): 2000x710mm - dimensions (length/width/height): 2600x1500x1600mm – weight: 1340kg ADVANTAGES - Made in Italy - With laser - Multi-blade saw, used, in perfect condition Net price: 36900 PLN Net price: 8786 EUR, depending on the exchange rate of 4.20 EUR (Prices are subject to change due to significant fluctuations)

Condition: ready for operation (used), Year of construction: 2013, overall weight: 4,600 kg, Panel saw manufactured in 2013. This FORMAT4 Kappa Automatic features a robust design with a weight of 4,600 kg and a powerful 14.0 kW motor. It includes an integrated control terminal with monitor, keyboard, and mouse, along with safety wire fencing and roller material support tables. If you are looking to get high-quality panel cutting capabilities, consider the FORMAT4 Kappa Automatic machine we have for sale. Contact us for further details. Bjdpfx Aezx Uv Ujbtswt - Voltage: 400 V- Phase: 3-phase- Frequency: 50 Hz- Power: 14.0 kW- Current: 28.0 A- Weight: 4,600 kg

Condition: new, Bernardo Panel Saw Classic 3200 C The Classic 3200 C panel saw with tilting saw blade meets all the requirements of modern workshops and is the ideal machine for cost-conscious small and medium-sized enterprises. Both the robust design and the generous dimensions of the machine ensure optimal working conditions for cutting solid timber or large panels; even decorative panels can be processed effortlessly using the standard scorer unit. Features • Aluminum sliding table with hardened guide rails • Standard table extension and table widening for handling larger panels • Stable outrigger table allows processing of large and heavy sheets without additional assistance • Powerful drive motor ensures optimal cutting performance even during extended operations • User-friendly degree scale directly readable from the handwheel • Scoring unit with independent drive included as standard • Extendable telescopic fence (up to 3100 mm), mountable on the outrigger table front and back • Rigid saw unit guarantees vibration-free and precise operation • Machine body constructed from torsion-resistant steel and cast iron combination • Hinged rip fence with robust 40 mm round bar guide Technical Specifications Table size: 935 x 620 mm Sliding table: 3200 x 370 mm Crosscut length: 3200 mm Max. saw blade diameter: 315 x 30 mm Max. cutting height 90° / 45°: 90 / 65 mm Cutting width at rip fence: 1295 mm Table height: 850 mm Table extension: 600 x 615 mm Table widening: 900 x 600 mm Outrigger table with roller: 1210 x 860 mm Main saw blade speed: 4000 / 6000 rpm Scoring saw blade speed: 8000 rpm Scoring saw blade: 120 x 20 mm Extraction port diameter: 100 mm Motor output S1 100%: 4.0 kW (5.5 HP) Motor input S6 40%: 5.5 kW (7.5 HP) Scoring motor power: 0.75 kW Voltage: 400 V Machine dimensions (W x D x H): 3445 x 3560 x 1570 mm Weight: approx. 710 kg Scope of Delivery • Saw blade guard with infeed roller Bjdpfxeywxrge Abtewt • Mitre fence • Crosscut shoe • Table widening • Extendable telescopic fence • Longitudinal fence stops • Outrigger table with roller • Push stick • Scoring unit with independent motor • Operating tools

Condition: new, Year of construction: 2025, operating hours: 60 h, functionality: fully functional, workpiece weight (max.): 40,000 kg, wheel width: 3,700 mm, feed length X-axis: 2,000 mm, feed length Y-axis: 1,300 mm, feed length Z-axis: 500 mm, rotary table diameter: 3,700 mm, position of the milling head: 0,025, table diameter: 2,000 mm, feed rate X-axis: 10 m/min, feed rate Y-axis: 10 m/min, feed rate Z-axis: 6 m/min, total length: 12,000 mm, gear diameter: 400 mm, total height: 5,000 mm, total width: 4,000 mm, Equipment: CE marking, documentation/manual, rotational speed infinitely variable, TECHNICAL REQUIREMENTS Bwodpfx Aboy A Nglotot GEAR HOBBING MACHINE GHM 2500 CNC Description of the main components of the GHM 2500 machine The GHM 2500 CNC gearing milling machine is a machine tool intended for processing by milling toothed wheels and toothed crowns. The machine is equipped with an external teeth milling head - which can process the teeth with an inclination angle from 0 to +/- 45 degrees - and an internal teeth milling head. The machine is composed of a milling unit, a unit for clamping and rotating the workpiece and the pinion axis centering tip. The milling/gearing unit is provided with three translation axes and two rotation axes, as follows: -X axis: longitudinal/radial movement towards the workpiece axis -Y axis: vertical movement of the gearing head -Aza Z: tangential movement of the gearing head -Axis: inclination +/-45 degrees of the gearing head -Axis C: rotation of the main axis of the gearing head The part fixing unit (the machine plate) has a rotation axis, axis B, for rotating the part. 1. External Gearing head – the housing of the tooth milling head is a GG300 gray cast iron cast piece. On the front side there are the counter guides of the Y axis (vertical movement of the head). Inside are the main tool actuation mechanisms, the mechanism for the horizontal movement of the gearing head axis and the mechanism for tilting the gearing head. The main actuation mechanism of the gearing shaft is composed of a 55 kW – S1 motor, a ZF angular reducer and a gearing shaft, mounted in the housing of the toothing horse. 2. Internal Gearing head – the housing of the tooth milling head is a GG300 gray cast iron cast piece. On the front side there are the counter guides of the Y axis (vertical movement of the head). Inside are the main tool actuation mechanisms, the mechanism for the horizontal movement of the gearing head axis and the mechanism for tilting the gearing head. The main actuation mechanism of the gearing shaft is composed of a 55 kW – S1 motor, a ZF angular reducer and a gearing shaft, mounted in the housing of the toothing horse. 3. The Quill - has the role of fixing the high parts, having a vertical displacement stroke. 4. The longitudinal advance mechanism of the upright, X axis – is made by a servo motor 30 Nm_ 3000 rpm, a Gressner worm reducer and a ball screw diam. 80 x 10, accuracy class IT 3. 5. The vertical advance mechanism of the toothing head, Y axis – consisting of a 30 Nm_ 3000 rpm servo motor, a Gressner worm reducer and a ball screw diam 80 x 10, precision class IT3. 6. Plate advance mechanism / plate rotation, C axis – is made with two 50 Nm_ 2000 rpm servo motor, a Gressner worm reducer and a duplex worm that meshes with the worm crown located on the plate. 7. The gearing head tilting mechanism, axis B – is made by a / 20 Nm_3000 rpm servo motor, a Gressner worm reducer and a worm gear-segment worm gear transmission. 8. The axial displacement mechanism of the gear head, Z axis – is made by a 20 Nm_3000 rpm servomotor, an Alpha Getriebe planetary reducer and a ball screw diam. 63 x 10, accuracy class IT3. 9. Top horizontal positioning mechanism, auxiliary axis X1 – a 20 Nm_ 2000 rpm servo motor, an Alpha Getriebe planetary reducer and a ball screw diam 63 x 10, precision class IT5.

Condition: used, Year of construction: 2016, Used machine Year of manufacture: 2016 Equipment and technical data: - Electrics 3x400V 50 / 60Hz - Gimbal-mounted 5-axis electrospindle 12 kW (S6) HSK F63 - 24,000 rpm Bjdpfx Abezlbpbotowt - ceramic bearings incl. liquid cooling with infinitely height-adjustable extraction hood - electric-motor controlled - full rated power at approx. 12,000 rpm - speed: 1000 - 24000 rpm - drive: 3-phase HF motor, inverter-controlled - direction of rotation: clockwise/counter-clockwise - 2 controlled compressed-air connections - interface for aggregates - tool weight (rotating): 6 kg - max. saw blade Ø 350 - spindle cooling: liquid cooling - extraction hood infinitely variable - Profit H350 16.30: CNC machining centre in gantry design (without tool) with digital drives (driven on both sides). The machine column of the Profit H350 16.30 is made of thick-walled, electrically welded rectangular tubes. The steel ribbing inside the column achieves high stability. - Machining field H350 16.30: Travel of the axes: X = 4000 mm Y = 1970 mm Z = 455 mm Working field: X = 3000 mm Y = 1500 mm Z = 150 mm clearance height Axis positioning speeds: depend on the selected safety system (these can be found in the layout). - Travelling gantry driven on both sides - Guide system X axis: The travelling gantry of the X axis is driven via a rack with inclined, crowned tooth form - This guarantees highest precision. The reduction gear ensures highest machining quality and repeat accuracy. The bearing is provided by means of encapsulated recirculating-ball shoes running on hardened and ground linear guides. - Guide system Y axis: The bearing is provided by means of encapsulated recirculating-ball shoes running on hardened and ground linear guides. The Y axis is positioned by means of a ground recirculating ball screw. - Guide system Z axis: The bearing is provided by means of encapsulated recirculating-ball shoes running on hardened and ground linear guides. The Z axis is positioned by means of a ground recirculating ball screw. - Automatic central lubrication: The grease is delivered in a controlled manner to the guide carriages of the X, Y and Z axes as well as to the recirculating ball screws in Y and Z. The lubrication process is carried out automatically after a specified time. - 12-position linear tool changer on the left of the machine column incl. a pick-up position for aggregates: The 12-position linear changer ensures shortest changeover times and offers sufficient space for milling tools. One aggregate change position (fitting variants see layout) Max. tool diameter 250 mm Max. tool length 240 mm - Drilling head DH 18 6H 1S: Vertical 12 spindles: 7 spindles in the X direction and 5 spindles in the Y direction. Horizontal 6 spindles: 4 spindles in the X direction and 2 spindles in the Y direction. Forward stroke = 70 mm max. drill length = 70 mm and shank D = 10 mm. All spindles are individually driven and selectable. 1 grooving saw – in the X direction max. saw blade diameter 120 mm max. blade thickness 5 mm max. speed infinitely variable up to 7500 rpm. The drilling group covers the entire working field both horizontally and vertically. - Controlled central extraction connection: Via the program control, either the drilling head or the milling spindle is extracted. This controlled slide gate achieves an optimised extraction performance. Connection diameter see layout - 6 workpiece supports: With front and rear...