Used Construction Fence for sale (20,588)

Condition: used, For sale: construction fence including transport rack and concrete bases. Ksdpfextaqaex Adwedg Quantity: 18 fence panels from Staufen Baubedarf 3 fence panels from Eberle/Hald Panel size: 3.5m x 2.0m 24 concrete bases 1 transport rack Delivery terms: Incoterm, FCA OSG EXCELLO Göppingen

Condition: new, Year of construction: 2026, functionality: fully functional, power: 55 kW (74.78 HP), ### Introduction to Jaw Crushers A jaw crusher is a type of primary crusher used in mining and ore processing plants. It works by using compressive force to break down large rocks into smaller, more manageable pieces. The machine consists of a fixed jaw and a movable jaw, which together create a V-shaped cavity called the crushing chamber. The movable jaw exerts force on the rock by forcing it against the stationary plate, causing it to break. Key Components: - Fixed Jaw Plate: Mounted in a fixed position. - Movable Jaw Plate: Mounted on a pitman that moves in a reciprocating motion. - Flywheel: Provides the necessary inertia for the crushing action. - Toggle Plates: Serve as a safety mechanism, ensuring that the jaw crusher operates efficiently and prevents damage. ### Working Principle The working principle of a jaw crusher is based on the reciprocating movement of the movable jaw against the fixed jaw: 1. Feeding: Large rocks are fed into the top of the crusher. 2. Crushing: As the movable jaw moves back and forth, it crushes the material against the fixed jaw. 3. Output: Crushed material is discharged from the bottom of the crushing chamber. ### Applications of Jaw Crushers Jaw crushers are versatile and can be used in a variety of industries and applications, including: 1. Mining and Mineral Processing: - Primary crushing of mined ore (gold, copper, iron, etc.). - Size reduction of rocks to facilitate further processing (e.g., milling). 2. Construction and Demolition: - Crushing of concrete, bricks, and other construction materials. - Recycling of building materials to create aggregate for new construction. 3. Aggregates Production: - Crushing of raw materials to produce aggregates for concrete and asphalt. - Production of road base and railway ballast. 4. Industrial Applications: - Crushing materials in chemical processing plants. - Size reduction of materials for production processes in various industries. 5. Environmental Management: - Processing of materials for landfill cover. - Recycling operations to reduce waste and promote sustainable practices. ### Advantages of Jaw Crushers - High Crushing Ratio: Capable of producing a range of material sizes with a single pass. - Durability and Reliability: Built to withstand heavy-duty use and harsh conditions. - Simple Structure: Easy to maintain and repair, with fewer components compared to other types of crushers. Ksdpfxsq Nf Tvj Adwodg - Versatility: Suitable for various types of materials and a wide range of applications. - Energy Efficiency: Efficiently uses energy, making it cost-effective for operations. ### Examples of Use Cases - Mining Operations: Jaw crushers are used as primary crushers in mine sites to crush large rocks before being processed further in the milling process. - Construction Sites: Used to break down concrete and other building materials for recycling and re-use. - Aggregate Production: Integral in producing the base materials for construction and infrastructure projects. - Demolition Projects: Efficiently crushes and recycles materials from demolished structures. By understanding the introduction and applications of jaw crushers, businesses can make informed decisions about integrating this machinery into their operations for efficient and effective material processing.

Condition: new, functionality: fully functional, Year of construction: 2025, A sand aggregate or gravel production plant is a facility where raw materials like sand, gravel, and other aggregates are processed to create various products used in construction and other industries. These facilities typically involve a series of processes to transform raw materials into the final products. Here is a general overview of the key components and processes involved in a sand aggregate or gravel production plant: 1. Mining and Extraction: - The process starts with the extraction of raw materials from quarries or mines. Heavy machinery such as excavators, loaders, and bulldozers are used to remove the raw materials from the earth. 2. Crushing and Screening: - The extracted raw materials often need to go through crushing and screening processes to reduce their size and separate them into different grades. - Crushers break down large rocks into smaller pieces, and screens sort the particles based on size. 3. Washing: - Washing is a common process to remove impurities such as clay, silt, and dust from the raw materials. This is particularly important for sand and gravel used in construction. 4. Grading and Sorting: - After washing, the materials may go through grading and sorting processes to separate them into different sizes and qualities. 5. Storage and Stockpiling: - Processed materials are often stored in stockpiles for further use. Adequate storage facilities are necessary to manage different grades of materials. 6. Conveying and Transportation: - Conveyor systems are used to transport materials between different stages of the production process. Transportation methods, such as trucks or conveyor belts, are used to move the final products to distribution points. 7. Quality Control: - Quality control measures are implemented to ensure that the final products meet the required specifications and standards. This may involve regular testing and analysis of the materials. 8. Environmental Considerations: - Sustainable practices and environmental considerations are crucial in the operation of a production plant. Measures such as dust control, water recycling, and rehabilitation of mined areas are often implemented to minimize the environmental impact. 9. Maintenance and Safety: - Regular maintenance of equipment is essential for the smooth operation of the plant. Safety measures are also critical to protect workers and ensure compliance with regulations. 10. Final Product: - The final products from a sand aggregate or gravel production plant may include various grades of sand, gravel, crushed stone, or other types of aggregates used in construction, concrete production, asphalt production, and other applications. Kdodpfx Ajq Nia Iodweg It's important to note that the specific processes and equipment used in a production plant may vary based on the type of raw materials, the intended final products, and local regulations. Additionally, advancements in technology and sustainability practices may influence the design and operation of such facilities.

Condition: new, functionality: fully functional, Year of construction: 2025, Small stone jaw crusher with vibrating screen powdered by diesel engine Max input size: 210mm Capacity: 15-22 t/h Output size: 0-5mm, 5-10mm, 10-22mm, 22-31mm Kodpfxjq I Nvis Adwedg Diesel engine: 28HP

Condition: new, Year of construction: 2025, Creating a cheap portable or mobile sand making plant involves optimizing costs while maintaining functionality and efficiency. Here's a basic outline of components and considerations for designing a cost-effective portable sand making plant: Kdjdpeq N Ud Iefx Adwjg 1. Portable Sand Making Machine: - Select a cost-effective sand making machine that meets your production requirements. Consider factors like capacity, efficiency, and maintenance costs. - Look for options that offer good performance at a lower initial investment. 2. Screening Equipment: - Choose a portable screening unit to separate the sand into different sizes. This is crucial for producing high-quality sand with the desired particle size distribution. - Consider modular screening units that are easy to transport and set up. 3. Conveyor Systems: - Utilize conveyors to transport raw materials between different components of the plant. Opt for simple and reliable conveyor systems. - Explore cost-effective conveyor options that are easy to maintain. 4. Hopper and Feeder: - Incorporate a hopper and feeder system to ensure a continuous flow of raw materials to the sand making machine. This helps optimize the production process. - Choose a design that minimizes material spillage and wastage. 5. Power Source: - Consider energy-efficient power sources to reduce operational costs. This could include using generators or connecting to the electrical grid, depending on the availability and cost of electricity in your location. 6. Chassis and Mobility: - Opt for a simple and robust chassis design that allows for easy transportation. Depending on your needs, choose between wheels or tracks for mobility. - Aim for a design that facilitates quick setup and dismantling to save time and labor costs. 7. Control System: - Implement a user-friendly control system that enables operators to monitor and adjust the sand making process efficiently. - Consider automation features that enhance control and reduce the need for constant manual intervention. 8. Dust Control and Environmental Considerations: - Integrate effective dust control measures to comply with environmental regulations and ensure a safe working environment. - Explore environmentally friendly features to align with sustainability goals. 9. Modular Design: - Consider a modular design for easy customization and scalability. This allows you to adapt the plant to varying production needs over time. 10. Used Equipment: - Explore the possibility of using refurbished or used equipment to cut down on initial costs. Ensure that the used equipment is in good working condition and can meet your production requirements. Remember that while cost optimization is important, it's crucial to maintain the quality and efficiency of the sand making process. Additionally, compliance with environmental regulations should be a priority. Always consider the specific requirements of your project and seek professional advice if needed.

Condition: new, functionality: fully functional, Equipment: CE marking, SRB - Vranje Construction Project specializes in the production of complete pelletizing equipment with capacities from 500 kg/h up to 6 t/h. We manufacture the following: Boilers Dryers Silos Mixer with conditioner Mill Pellet cooler Presses Conveyor belts Mixers Kedpfjxqd T Hjx Adwedg Dedusting systems Crushers All our equipment comes with a 1-year warranty. 24h service support We offer the following services: Equipment installation Diagnostics Servicing Line maintenance Staff training Commissioning All inquiries and requests can be sent by email or by phone on working days from 09:00 to 17:00.

Condition: new, Year of construction: 2008, operating hours: 1 h, functionality: fully functional, machine/vehicle number: 1753, overall weight: 450 kg, operating pressure: 250 bar, total length: 1,420 mm, total height: 1,420 mm, type of input current: three-phase, total width: 900 mm, tank capacity: 160 l, input voltage: 380 V, pump capacity: 65 l/min, rotational speed (min.): 1,500 rpm, rotational speed (max.): 1,500 rpm, power: 18.5 kW (25.15 HP), delivery pressure: 250 bar, empty load weight: 450 kg, Location: Fohnsdorf, Austria Available immediately Kodpslhqdmofx Adwedg

Condition: excellent (used), Made of heavy cast iron – high rigidity and durability. Working opening approx. 120 mm (measured with a caliper). Adjustable pins with roller ends. Mounting through holes in the base – secure and stable installation. Very good condition, fully functional and ready for use. Ideally suited for machining shafts, tubes, rods, and other workpieces requiring support during turning. Kodpjw Sfptefx Adwjdg

Condition: excellent (used), For sale: Steady rest for lathe. Professional workshop equipment for stable guidance of long and heavy workpieces during machining. Solid cast iron construction – maximum rigidity and durability. Working opening approx. 150 mm (measured with caliper). Opening frame – quick and convenient clamping of the workpiece. Adjustable pins with sliding tips. Attachment to the lathe bed via a base with hole. The steady rest is intended for turning shafts, tubes, bars, and other long elements that require support during machining. Kedpfx Aow Sfpyedwodg

Condition: new, functionality: fully functional, Custom-tailored personal quotation Kjdsx Ug Hyspfx Adwedg

Year of construction: 2020, condition: used, Serial number: 240xxxx Please contact ATS Norway for more information Kodpfxjya Ubzs Adwedg Please provide reference number upon request: 22191 Specifications: 2020 model Weight: 950 kg Mounting for truck, tractor and wheel loader Display replaced Description: 2020 Vama PA 4.2 pole setter.Suitable for use on trucks, tractors and wheel loaders.According to the owner, it has installed just under 10,000 poles.The display has been replaced.Available for delivery on short notice. Own weight: 950 Model: 2020 Vama PA 4.2 Stikkesetter

Condition: used, New: Yes Applicable material: Bitumen Empty weight: 18.000 kg Productivity: 10 tph Polymer Modification Plant Full Automatic TECHNICAL SPECIFICATIONS Grinding and homogenizing Polymer (SBS,APP,KRATON etc.) and bitumen. Feeding : Bitumen and polymer pre-mixture Flow rate : max. 15 t/hour Density : 1.1 g/cm3 Viscosity : max.20000 mPa s (cP) Heat: 190 °C Solid Matter : Machine Entrance :max. 3-6 mm Machine Exit :max. 0.2 mm MOTOR 130 kW Speed 3000 min-1 Voltage 400 V,50 Hz,3 phase Starting methode Y/Δ 2. VERTICAL MIXING TANK a) Frame - Will be manufactured as vertical rectangular profile. - Will be manufactured in dimentions as providing 11 m3 volumes. - Body will be produce 5 mm St37 quality plate. - Bitumen filling pipe will be 3’’ DN80 ,PN16,DIN2633 1 unit, discharge pipe will be 3’’ DN150,PN16,DIN2633 and 3’’ DN80,PN16,DIN 2633 2 units. - Control cover will be dimensions of 500x500 mm. b) Heating - It will be as providing from from out walls with diathermic hot oil heating. - Imperviousness test will not be performed under 6 bar. c) Insulation - 100 mm rapid wire-mesh rock wool will be comply with TSE ( Turkish Standards Institute ) standarts. - The exterior surface will be stainless steel plate and will be manufactured as to container dimentions. d) Mixing System - 2x 7,5 kW 60 d/min rpm mixing motor - Drive will be provided with sprockets - Imperviousness will be obtained at beddings. - Bearings will be SKF or FAG. - The Fixed wings at exteriror walls will be mounted so that dispersion will be increased and a homogeneous structure will be provided. e) Heat displays will be digital and analogue and two outlets will exits. f) Built-in connection paddle, ladders and platform will be presented. 3. BITUMEN PUMPS - Will be 2 ½ XLA type with oil heating. - Pump capacity will be as 25 t/h bitumen pumping - Will be 7,5 kW 400 r/min reducer motor coupled. 4. SBS (POLYMER MODIFIED GRANULE) FEEDING UNIT a) Feed Hopper - Will have 500 x 500 gap width - Will be produced of 4mm plate - In feding helix, it will be mounted with bolt30 m3/h capacity granulate feeding. - Frame will be in 5 mm Wall thickness from 220 mm diameter pipe. - Imperviousness will be provided in beddings. - In bearings SKF or FAG will be used. - Will 5,5 kW 80 rpm gear unit with coupling drive. 5. PIPE NETWORK AND EQUIPMENTS a) Pipes - Will be steel drawn pipes DIN 171175 (DN200,DN150,DN100,DN80,DN65,DN25) - Mill line will be manufactured as 3’’ inner pipe, 4’’ out jacket pipe. Kedpfox D Df Nox Adwedg - Jacket pipes will be welded connection under TSE standarts. - Jumper pipes will be established from appropriate points of 1’’. b) Compensatories - DN 50,DN 80, PN 16 400°C c) 3 ways and 2 ways valves with heating - Complied to TSE standarts. - Pneumatic control type will be used. - Will provide the conditions of working under high pressure (16 bar) and heat (230 °C) d) Hot Oil Valves - KLINGER or THERMO branded hot oil valve with pistons will be used. - Will be DN 25 PN16, DN65 PN16, DN50 PN16 e) Filter - Will be with 3 mm wire interior reservoir and it will be cleanable often and easy. - Will be with 3’’ flange entrance and exit...

Condition: used, New: Yes Colour: Silver Applicable material: Bitumen Empty weight: 9.500 kg Cargo space capacity: 50.000 l Productivity: 50 tph Kdodpfx Adjx D Dbkewog Double Skinned Insulation • 5mm first skins235jr main tank body • 100 mm stonewool insulation between skins • 3mm top skin s235jr • 500 ton total capacity • Complete electrical heating • DN80 outlet steel pipe and valve • DN80 inlet pipe and valves • Hydrostatic Level Gauges • 3x45kw Heating Coils • 3x45kw Gamak/Yılmaz Gerbox/Motor Stirrer • 110 Tons Weight • 2xPT100 Tempereture sensor • Capacitive Level sensor • Power panel and control panel on chassis • Plug-in Electrical Installation • Turn-key ready to use

Condition: used, New: Yes Colour: Silver Applicable material: Bitumen Empty weight: 9.500 kg Cargo space capacity: 50.000 l Productivity: 50 tph BITUMEN TANK (50 TONS) • Tanks capacity shall be 50 tons. • Tanks shall be produced in accordance with TSE and highway commission practices. • The tank shall incorporate a hot oil heating, • Seamless steel drawn pipe serpentine system to heat • The bitumentemperature up to mixer mixing temperature • The fuel tank shall incorporate level and heat indicator, suction nozzle, filling orifice, ventilation system, inspection hatch and drain outlet. • There shall be support legs under the tank and its surface shall be isolated with 50 mm rock wool and covered with 0,80 mm galvanized sheet. 1. HOT OIL GENERATOR • Generator capacity shall be 2 000.000 kcal/h. • The system shall be made according to diesel fuel system. • The generator shall incorporate a 1500 l filling tank. • The generator shall be horizontal, have seamless steel drawn hot oil pipe, double wall and circulation body. • Generator body shall be isolated with 100 mm rock wool and covered with aluminium sheet. Kdedpfx Adox D A R Dowjg • Generator system shall be produced according to manufacture standards and it shall incorporate an expansion tank, degasser, oil filter, valves and full automatic ignition controlled burner, control panel, pomp and necessary safety equipment. • The serpentine be made of min. 30 m2 seamless steel drawn pipe. • The generator shall be equipped with coupled warning system to protect the complete system in case of dangerous situations showing hot oil level or a decrease in heat transfer oil level. • The burner system shall be designed to activate automatically depending on the adjusted operation temperature of the heat transfer oil. • The system shall be produced in the form of a complete package.

Condition: used, New: Yes Applicable material: Bitumen Empty weight: 16.000 kg Capacity: 10 m^2/h Full Automatic Bitumen Emulsion System 1. COLLOID MILL (10 m3/hour) 1 2. FOAM TANK (5 m3) 1 3. BITUMEN FEEDING PUMP 1 4. FOAM LYE SYSTEM 1 5. PIPE NETWORK AND EQUIPMENTS 1 6. CONTROL PANEL SYSTEM 1 7. CHASSIS 1 FOAM TANK(1 pieces) a) Frame - Box profile - Capacity : 5 m3 - Tank body will be produced of 3 mm AISI 304 stainless steel plate - The welded connections will be manufactured with appropriate stainless stell TIG welding b) Heating - 2’’ stainless steel pipe - Oil input and output pipes will be 1’’ DN50,PN16,DIN 2633 - Tightness test will be done 6 bar pressure. c) Mixing System - 3 kW 60 d/min rpm mixing motor - Drive will be provided with sprockets - Imperviousness will be obtained at beddings. - Bearings will be SKF or FAG. - The Fixed wings at exteriror walls will be mounted so that dispersion will be increased and a homogeneous structure will be provided. d) Heat displays will be digital and analogue and two outlets will exits. - Bitumen pump capacity will be as max. 8 m3/h bitumen pumping - Will be 7,5 kW 400 r/min reducer motor coupled. - Bitumen counter will be 10 m3/h capacity system. Kjdpfxox D A Rkj Adwodg a) Pipes - Will be steel drawn pipes DIN 171175 (DN200,DN150,DN100,DN80,DN65,DN25) - Mill line will be manufactured as 1.5’’ inner pipe, 2’’ out jacket pipe. - Jacket pipes will be welded connection under TSE standarts. - Jumper pipes will be established from appropriate points of 0,5’’. b) Compensatories - DN 50,DN 80, PN 16 200°C c) 3 ways and 2 ways valves with heating - Complied to TSE standarts. - Will provide the conditions of working under high pressure (16 bar) and heat (230 °C) d) Hot Oil Valves - KLINGER or THERMO branded hot oil valve. Heat resistant. - Will be DN 25 PN16, DN65 PN16, DN50 PN16 e) Filter - Will be with 3 mm wire interior reservoir and it will be cleanable often and easy. - The panel will be in type of compiled to IC standarts.

Condition: new, Sand Gravel Fabrication Plant: Essential Solution for Modern Construction Needs In the construction and infrastructure industry, high-quality sand and gravel are critical raw materials for creating concrete, asphalt, and other foundational elements. A Sand Gravel Fabrication Plant is the cornerstone of producing these materials efficiently and at scale. With advanced technology, versatility, and scalability, these plants cater to a wide range of projects, ensuring consistent quality and meeting the growing demand for construction materials. This article explores the general introduction, features, and applications of sand gravel fabrication plants, including both stationary and mobile systems. General Introduction to Sand Gravel Fabrication Plants A sand gravel fabrication plant is a specialized facility designed to process raw materials such as sand, gravel, and aggregates into construction-grade products. These plants combine various equipment, including crushers, screens, conveyors, washers, and storage units, to convert raw materials into ready-to-use aggregates. There are two primary types of sand gravel fabrication plants: Stationary Fabrication Plants: Fixed installations designed for high-capacity production. Ideal for large-scale operations and long-term projects. Mobile Sand Gravel Fabrication Plants: Portable systems that can be transported to different project sites. Perfect for temporary operations and projects in remote locations. Both types are equipped with advanced machinery and automation systems to ensure high efficiency, precision, and sustainability. Applications of Sand Gravel Fabrication Plants Sand gravel fabrication plants are indispensable across multiple industries due to their ability to produce high-quality aggregates. Key applications include: 1. Construction and Infrastructure Produces sand and gravel for concrete, asphalt, and base materials. Supports large-scale infrastructure projects such as highways, bridges, airports, and railways. Kdsdpfsvlwqljx Adwog 2. Residential and Commercial Development Supplies aggregates for building foundations, driveways, landscaping, and drainage systems. Plays a vital role in residential housing and commercial property construction. 3. Road Construction Provides high-quality crushed stones and sand for roadbeds, pavements, and highways. Ensures durability and longevity of road surfaces. 4. Mining and Quarrying Efficiently processes mined materials into usable aggregates. Enhances productivity in quarrying operations with optimized material handling systems. 5. Environmental Restoration Supplies aggregates for erosion control, land reclamation, and shoreline protection projects. Facilitates sustainable environmental rehabilitation efforts. 6. Recycling of Construction Waste Mobile sand gravel fabrication plants are ideal for recycling concrete and asphalt. Converts waste materials into usable aggregates, reducing landfill burden and promoting sustainability. Stationary vs. Mobile Sand Gravel Fabrication Plants Stationary Fabrication Plants Best For: Long-term, large-scale projects and industrial operations. Advantages: High-capacity production. Robust and durable structures. Advanced automation for minimal manual intervention.

Condition: new, Year of construction: 2025, functionality: fully functional, power: 75 kW (101.97 HP), Jaw crusher for stone & ore crushing in quarry and mining fields Model: PE600X900 Max input size: 500mm Capacity: 80-135 t/h Ksdsq H Shcopfx Adwsdg Motor: 75KW Weight: 15T Besides this models, we also have the other models like PE900X1200, PE500X750, PE250X400, PE400X600, etc, and we also have impact crusher, cone crusher, hammer crusher, vsi crusher, more important we can also provide complete stone crushing screening plant with capacity 30-1000 t/h, welcome to contact us for more details if you want a different model or the other type of crushing machine. You can leave us a message if you need a different model or a different type of crusher.

Year of construction: 2011, condition: used, Please contact ATS Norway for more information Please provide reference number upon request: 20972 Description: Ksdowyabzepfx Adwsdg 2011 wheel loader asphalt milling machine. Owner says it should work and is ready for use. Ready for delivery.

Condition: new, Mobile warehouse customized quotation Kjdpfx Adexzrtpowsdg

Year of construction: 2022, condition: used, Serial number: K22I15xxxx Please contact ATS Norway for more information Please provide reference number upon request: 22150 Specifications: 2022 model Unused generator Diesel 400 volts Ready for delivery Own weight: 11 Model: C17D5 Aggregat. Ubrukt! Ksdpfjx U Rhzex Adwjdg

Condition: used, Please contact ATS Norway for more information Please provide reference number upon request: 22136 Kdodpfxox Ty Rij Adwsg Description: Plumett tensioner for sale on behalf of a customer.According to the owner, the machine is in working condition.Ready for delivery.

Condition: used, Serial number: 721xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21829 Specifications Unsure rs Working width: 290 cm Wheel loader attachment or tractor attachment included Description Tokvam FK diet. Kdodpfx Ajxxpynjdweg It can come with either a wheel loader mount or a tractor mount, but not both. Ready for delivery. Model: FK kost

Condition: used, Please contact ATS Norway for more information Please provide reference number upon request: 21145 Kdjdpfew Ruyljx Adwog Specifications: Cassette length: 2–4 m Base model height: 2.40 / 2.60 cm Top model height: 1.30 m Vertical pipe clearance: 1.51 / 1.56 m Ready for delivery Own weight: 1 Model: KS 100 grøftekasse

Condition: used, Serial number: D0500xxxx Please contact ATS Norway for more information Please provide reference number upon request: 22060 Description:It has not been in operation for five years, so the condition is unknown.The grapple was working the last time it was in use.Ready for delivery. Ksdpfx Aox Ip Uasdwedg Own weight: 11 Model: Sorteringsklype

Year of construction: 1988, condition: used, Serial number: 7.5745.3xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21961 Specifications: - 1988 model - Hours: 2550 - Electric - Charger - Hydraulic sideshift - Lifting capacity: 900 kg - Ready for delivery Kdodpsx Azk Hsfx Adwsg   Own weight: Model: 1988 Jungheinrich EFG D1.0 El Truck m/ Lade