Used Haas Vf 0 for sale (250)

Condition: ready for operation (used), Year of construction: 2007, Haas VF-4SS HE Milling Machine with HRT310 Year of manufacture: 2007 X-axis: 1270 mm Y-axis: 508 mm Z-axis: 635 mm Table size: 1,321 x 457 mm Maximum table load: 794 kg Spindle taper: ISO SK 40 Spindle: 12,000 rpm with 22.4 kW Through-spindle coolant (IKZ): 21 bar Programmable coolant nozzle Additional filter Chip conveyor spiral 24+1 tool changer High-speed machining Portable control panel VQC-V programming support G/M codes RS-232 and USB interfaces Coordinate system / scaling User-defined macros 4th axis preparation HRT 310 CNCB HTS9 manual tailstock Machine weight approx. 6.3 t The machine can be inspected under power by arrangement near Bielefeld. Loading can be provided. Buyer is responsible for transport. Technical data, accessories, and machine descriptions are non-binding. Nkedpsxit Nujfx Adwst

Condition: like new (used), Year of construction: 2024, Traverses X Y Z: 762 x 508x 508, Table 914 x 457mm, Nsdpfx Adev Tah Aswokt Spindle speed 0 – 12,000rpm, Spindle taper BT40, Spindle Motor 22Kw, HAAS Control, 30 Station ATC, through spindle Coolant , Low Volt light, swarf auger, spindle probe, tool setter

Condition: excellent (used), Year of construction: 2011, Traverses X Y Z: 762 x 406 x 508, Njdpexwyuasfx Adwskt Table 914 x 356, Spindle speed 0 - 7500rpm, Spindle taper BT40, Spindle Motor 30Hp HAAS Control, 24 Station ATC, Programmable Coolant nozzle, WIPS, Low Volt light, 2 axis trunnion table 160mm.

Condition: good (used), Year of construction: 2010, X Y Z: 1270 x 508 x 508mm, Nsdpfx Adexpw Rvewekt table 1324 x 457mm, 12000 rpm, BT 40, HAAS Control, 24 Station ATC, 40HP, chip auger, coolant, Haas TR210 5 axis trunnion table

Condition: good (used), Year of construction: 2017, Machine has 1,350 spindle hours and 7,000 power-on hours, Haas VF 3 with 4 axes, Year of manufacture: 2017, Control: Haas, Nedpsx Ezk Uefx Adwekt Travel X/Y/Z: 1016/508/635 mm, 24-position tool changer, Taper: SK 40, Table size: 1219 x 457 mm, Spindle speed up to 8,100 rpm, 4th axis HRT 310 with tailstock, Max. table load: 1,588 kg, 3D measuring probe, Renishaw probe,

Condition: used, Year of construction: 2007, operating hours: 7,675 h, functionality: fully functional, machine/vehicle number: 1059027, travel distance X-axis: 1,270 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 635 mm, rapid traverse X-axis: 25 m/min, rapid traverse Y-axis: 25 m/min, rapid traverse Z-axis: 25 m/min, feed length X-axis: 1,270 mm, feed length Y-axis: 508 mm, feed length Z-axis: 635 mm, feed rate X-axis: 16 m/min, feed rate Y-axis: 16 m/min, feed rate Z-axis: 16 m/min, torque: 122 Nm, controller manufacturer: Haas Automation, controller model: Haas CNC control 32 bit, workpiece length (max.): 1,321 mm, workpiece width (max.): 457 mm, workpiece height (max.): 635 mm, workpiece weight (max.): 1,588 kg, total height: 2,570 mm, total length: 3,330 mm, total width: 2,340 mm, table width: 495 mm, table height: 107 mm, table length: 1,321 mm, table load: 1,588 kg, overall weight: 5,316 kg, spindle speed (max.): 12,000 rpm, operating hours of spindle: 667 h, coolant supply: 6.9 bar, spindle motor power: 22 W, spindle nose: CT-40/BT-40, number of spindles: 1, number of slots in tool magazine: 20, mount diameter: 89 mm, tool diameter: 89 mm, tool weight: 5 g, input voltage: 440 V, type of input current: three-phase, For Sale – Haas VF-4 Vertical Machining Centre (2007 Model) Nkodpfxjxu E Dzs Adwst We are selling our 2007 Haas VF-4 CNC Vertical Machining Centre, a reliable and versatile machine that has been well maintained and is ready for immediate use.

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, Controller HAAS Intuitiv programming with USB slot Table size 1372 x 610 mm Table load max. 794 mm „T” slots in table 16 x 80 mm and 7 pcs. Travel X axis 1016 mm Travel Y axis 660 mm Travel Z axis 635 mm Distance of spindle end to table surface (max) 742 mm Distance of spindle end to table surface (min) 107 mm Spindle speed 12000 rpm Spindle taper SK40 Spindle power 22,4 kW ATC magazin 30+1 pots Weight 6800 kgs Dimensions LxWxH = 4000 x 2500 x 2700 mm Accessories and features • Renishaw tool presetter and zero point presetter • HSM (for CAM production, 1000 lines pre-reading) • Digital MPG • for 4th axis preparation • TCS (300 psi), • Tool cooling from outside Nsdpfx Adjw Tc H Sjwekt • extra filters • chip conveyor • programmable coolant nozzles • spindle orientation • coordinate system rotation • media file on screen • visual programing possibility Very good condition. Only used in single production.

Condition: used, Year of construction: 2006, travel distance X-axis: 762 mm, travel distance Y-axis: 406 mm, travel distance Z-axis: 508 mm, controller manufacturer: Haas, total height: 2,750 mm, total length: 2,250 mm, total width: 2,360 mm, table width: 914 mm, table length: 356 mm, table load: 680 kg, spindle speed (max.): 12,000 rpm, Equipment: documentation/manual, CNC Vertical Machining Centre CNC Control Haas CNC Table size 914 x 356 mm Table load 680 kg Number of pallets: 1 x Movement X-axis 762 mm Nsdsxnm A Ejpfx Adwjkt Movement Y-axis 406 mm Movement Z-axis 508 mm Spindle taper DIN 68971A Spindle speed 12.000 1/min Spindle motor 22,4kW Magazin capacity 24 + 1 If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: used, Year of construction: 2021, travel distance X-axis: 1,270 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 635 mm, rapid traverse X-axis: 25 m/min, rapid traverse Y-axis: 25 m/min, rapid traverse Z-axis: 25 m/min, feed length X-axis: 1,270 mm, feed length Y-axis: 508 mm, feed length Z-axis: 635 mm, feed rate X-axis: 16 m/min, feed rate Y-axis: 16 m/min, feed rate Z-axis: 16 m/min, nominal power (apparent): 26 kVA, torque: 122 Nm, controller manufacturer: HAAS, Used Machining Center Brand: HAAS Model: VF-4 Year: 07/2021 Serial number: 1183245 Operating hours: Spindle on time: 6,000h Specifications: - Travels (X, Y, Z): 1270mm, 508mm, 635mm - Spindle-to-table distance (Min. - Max.): 107 - 742mm - Spindle speed: 8100 rpm - Spindle taper: ISO 40 - HAAS CNC Control - HaasDrop (for wireless file transfer to CNC) - Rigid tapping; synchronized tapping, with integrated tapping cycles and up to 8 retract speeds. - Safe Run; a HAAS Control software function that reduces the risk of significant damage in case the machine is impacted. - Tool changer carousel: 20 tools - Includes early power-failure detection module. - Coolant tank: 208 liters with coolant kit - Variable-flow coolant pump allows control of coolant flow and pressure via M-codes. - Maximum tool diameter: 89mm (adjacent tool slots filled) Nedpoxqct Sofx Adwskt - Maximum tool weight: 5.4kg - Table dimensions: 1321 x 495mm - Maximum table load: 1588kg - Maximum rapid traverse (all axes): 25.4 m/min Included options: - Preparation for through-spindle coolant - Auger-type chip conveyor - Programmable coolant nozzle, multi-position device that automatically and precisely directs coolant to the cutting tool

Condition: ready for operation (used), Year of construction: 2015, operating hours: 7,100 h, functionality: fully functional, travel distance X-axis: 1,270 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 635 mm, spindle speed (max.): 12,000 rpm, table load: 794 kg, TECHNICAL DETAILS Travel X: 1,270 mm Travel Y: 508 mm Travel Z: 635 mm Rapid traverse speed X/Y/Z: 35.6 m/min Distance spindle nose to table max.: 742 mm Distance spindle nose to table min.: 107 mm Max. spindle speed: 12,000 rpm Spindle drive power: 22.4 kW Njdpfsxtbtiox Adwjkt Table dimensions: 1,321 x 495 mm Max. table load: 794 kg Tool changer positions: 24+1 Max. tool weight: 5.4 kg Tool change time: 1.8 s MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): approx. 3,000 x 2,500 x 2,600 mm Weight: approx. 6,800 kg Cycle start time: approx. 10,100 h Feed time: approx. 7,100 h EQUIPMENT Haas control with synchronous tapping Wireless probing system Coolant system with programmable coolant nozzle Spiral chip conveyor

Condition: good (used), Year of construction: 2008, HAAS VF-5D / 40 MACHINING CENTER TRAVELS : X : 1,270 mm Y : 660 mm Z : 635 mm DISTANCE BETWEEN PLANE – TABLE AND SPINDLE NOSE : 178 – 813 mm TABLE : DIMENSIONS : 1,321 x 584 mm LOAD CAPACITY : 1,815 mm NUMBER AND SIZE X PITCH OF T-SLOTTS : 7.14 X 80 mm SPINDLE : ROTATIONAL SPEED : 8,000 RPM SPEED RANGES : 2 SPINDLE NOSE : ISO 40 HIGH PRESSURE / INTERNAL COOLANT FEEDS : RAPID SPEED : 18,000 mm / min. WORKING SPEED : 12,700 mm / min. JOG : 0 – 1,260 mm / min. TOOL MAGAZINE : 24 POSITIONS POWER : 15 KW WEIGHT : KG. 7,000 Nkodpevf Nw Dsfx Adwet YEAR OF FIRST INSTALLATION : 2008

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 1058083, controller manufacturer: HAAS/FANUC, number of slots in tool magazine: 40, MACHINE DETAILS Tool changer: 40 positions Tool holder: BT40 Control: HAAS/FANUC Electrical data Voltage: 360–480 V Phases: 3 Frequency: 50/60 Hz Full load: 20 A Maximum load: 35 A Nkedjxuikxepfx Adwet

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: 40164, controller manufacturer: HAAS/FANUC, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 24, TECHNICAL DETAILS Spindle speed: 12,000 rpm MACHINE DETAILS Control: HAAS/FANUC Electrical data Voltage: 360/480 V Phases: 3 Frequency: 50/60 Hz Full load: 40 A Maximum load: 70 A EQUIPMENT Nkodpfx Adexuih Rowet 24-position tool changer BT40 Belt filter system / high-pressure pump KNOLL KF 150

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: 1062021, controller manufacturer: HAAS/FANUC, spindle speed (max.): 10,000 rpm, number of slots in tool magazine: 40, TECHNICAL DETAILS Spindle speed max.: 10,000 rpm MACHINE DETAILS Tool changer: 40-fold Tool holder: BT40 Njdpfxsxuidxo Adwskt Control: HAAS/FANUC

Condition: ready for operation (used), Year of construction: 2011, Travel X/Y/Z: 1000mm/500mm/635mm, tool holder: BT40, spindle speed: 10000rpm, tool positions: 40, control: Haas, spindle hours: approx. 4500h. 3-axis robot System 3R WorkPartner, year of manufacture: 2005, transfer weight: 80kg, stroke: 1500mm, pallet positions: 20. Including System 3R GPS 240 zero-point clamping system, tool measurement, tool breakage control, Renishaw 3D probe, and oil mist extraction. Documentation available. An on-site inspection is possible. Njdpfx Ajxg Riaodwekt

Condition: repair required (used), Year of construction: 2013, functionality: not functional, machine/vehicle number: 1106086, travel distance X-axis: 762 mm, travel distance Y-axis: 406 mm, travel distance Z-axis: 508 mm, table width: 356 mm, table length: 914 mm, The machine's tool changer is defective. The repair costs for this are approximately €8,000 - €10,000. The axis wear corresponds to the typical wear for a machine of this year of manufacture. TECHNICAL DETAILS Travel Paths X-axis travel: 762 mm Y-axis travel: 406 mm Z-axis travel: 508 mm Njdpfx Adew Axkyswokt Table Length: 914 mm Width: 356 mm Max. table load: 680 kg Spindle Spindle taper: SK-40 Spindle drive: 22.4 kW Speed: 12,000 rpm Tool Changer Tool changer: 24+1 magazine positions Feed Rates Rapid traverse: 35.6 m/min MACHINE DETAILS Electrical Data Voltage: 360–480 V Phases: 3 Frequency: 50/60 Hz Full load current: 40 A Maximum load: 70 A Short-circuit interrupting capacity: 10,000 A Short-circuit current: 5,000 A RMS symmetric Operating Dimensions Max. operating height: 2,667 mm Max. operating width: 3,175 mm Max. operating depth: 2,769 mm EQUIPMENT Key switch for program lock Synchronized thread tapping 208-liter coolant system with continuous coolant supply 15" color LCD monitor with USB port

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, travel distance X-axis: 1,016 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 635 mm, workpiece weight (max.): 1,500 kg, table width: 1,219 mm, table length: 457 mm, TECHNICAL DETAILS Travel Distances X-Axis: 1,016 mm Y-Axis: 508 mm Z-Axis: 635 mm Workpiece Table size: 1,219 mm x 457 mm Nodpexgpp Ssfx Adwekt Maximum workpiece weight: 1,500 kg Spindle Spindle taper: BT-40 Spindle speed: 7,500 rpm Spindle motor: 14.7 kW MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 3,000 x 2,450 x 2,850 mm Weight: 5,600 kg EQUIPMENT 20-position tool changer Programmable coolant nozzle Through-spindle coolant supply Low voltage lighting Chip conveyor

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: 1096687, travel distance X-axis: 1,016 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 635 mm, table width: 1,200 mm, table length: 400 mm, Equipment: chip conveyor, Machine from the insolvency of an automotive supplier TECHNICAL DETAILS Travel X-axis: 1,016 mm Nsdpfswqcq Hsx Adwokt Travel Y-axis: 508 mm Travel Z-axis: 635 mm Table size: approx. 1,200 x 400 mm EQUIPMENT - Tool changer - Chip conveyor - Swivel axis - Oil mist extraction Further details according to manufacturer - without guarantee Spindle speed: 12,000 rpm Tool taper: CT 40 Table load: max. 794 kg Tool diameter: 76 mm Tool slots: 24+1 Machine dimensions: approx. 3.9 x 2.7 x 2.7 m Weight: approx. 5.7 t

Condition: ready for operation (used), Year of construction: 2013, functionality: fully functional, machine/vehicle number: 1101742, travel distance X-axis: 762 mm, travel distance Y-axis: 406 mm, travel distance Z-axis: 508 mm, table width: 900 mm, table length: 400 mm, Machine recovered from the insolvency of an automotive supplier - machines are currently still in operation! TECHNICAL DETAILS X-axis travel: 762 mm Y-axis travel: 406 mm Z-axis travel: 508 mm Table dimensions: approx. 900 x 400 mm EQUIPMENT Tool changer Further information according to manufacturer - without guarantee Nksdpov Naw Njfx Adwjt Spindle speed: 12,000 rpm Tool taper: CT 40 Table load: max. 680 kg Tool diameter: 76 mm Tool slots: 24+1 Machine dimensions: approx. 3.2 x 2.8 x 2.7 m Weight: approx. 3.7 t

Condition: ready for operation (used), Year of construction: 2012, operating hours: 18,699 h, functionality: fully functional, machine/vehicle number: 1095132, travel distance X-axis: 1,270 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 635 mm, table width: 457 mm, table length: 1,321 mm, TECHNICAL DETAILS Travel X-axis: 1,270 mm Y-axis: 508 mm Z-axis: 635 mm Table Length: 1,321 mm Width: 457 mm Max. load: 794 kg Spindle Speed: 12,000 rpm Drive system: Inline Direct Drive Power: 22.4 kW Max. torque: 122 Nm at 2,000 rpm Feeds Rapid traverse X / Y / Z: 35.6 m/min Max. cutting feedrate: 21.2 m/min Tool Changer Capacity: 24+1 Type: CT 40 Max. tool diameter: 76 mm Tool-to-tool time: 1.6 s Chip-to-chip time: 2.2 s MACHINE DETAILS Dimensions Height: 3,023 mm Width: 3,886 mm Depth: 2,667 mm Operating Hours Cycle start time: 18,699 h Power-on time: 23,179 h EQUIPMENT 40 + 1 position tool changer, BT40 Nksdpfjxb Uhiox Adwot High-pressure spindle coolant 63 bar (TSC 1000) Coolant tank 360 liters Chip conveyor, spiral type 4th axis HRT 210, 210 mm including tailstock Wireless Intuitive Probe System (WIPS R) Renishaw OTS tool setter Renishaw measuring probe Intuitive Programming Screen (IPS) Programmable coolant nozzle (P-Cool) Approx. 15 tool holders

Condition: ready for operation (used), Haas VF-5B/40HE vertical machining center, year 2006. Nkedpfx Adsw H R H Ijwot

Condition: like new (used), Year of construction: 2022, functionality: fully functional, travel distance X-axis: 610 mm, travel distance Y-axis: 406 mm, travel distance Z-axis: 406 mm, workpiece weight (max.): 200 kg, table width: 500 mm, spindle speed (min.): 10,000 rpm, Equipment: chip conveyor, For sale: HAAS UMC-500 5-Axis Universal Machining Center Condition: Absolutely brand new machine. Only one part was produced for test machining. The equipment has been unused and stored for 2 years. Main technical specifications Travel: X-axis: 610 mm Y-axis: 406 mm Z-axis: 406 mm Table: Diameter: 500 mm Maximum workpiece weight: 200 kg 5-axis rotary/trunnion table (trunnion type) Spindle: Inline direct-drive 10,000 rpm 30 HP (22.4 kW) CAT 40 taper (40T) Through-spindle coolant: 300 psi (21 bar) Tool changer: 30 tool positions Side-mount, high speed Precision and compensation: Temperature compensation DWO/TCPC – Dynamic Work Offset and Tool Center Point Control Nsdpjxg Nd Njfx Adwekt Rigid Tapping Equipment and features: Haas NGC CNC control (FANUC compatible) 1 GB memory Ethernet connection, WiFi connectivity USB port, color 15” LCD display Early power-failure detection module Memory lock (keyswitch) Spindle coolant system Protective enclosure with doors Internal lighting Centralized lubrication system Top cover Measurement and calibration equipment: Renishaw WIPS wireless intuitive probing system (Haas Visual Programming System, macros, spindle orientation, coordinate rotation and scaling) Rotary-Axis calibration tool RJH remote jog handle with color display Chip and coolant systems: Coolant tank – 95 gallons (360 L) Initial fill with Blaser coolant emulsion Chip conveyor (belt type – CONVEYOR-H) High-pressure air system Documentation: Original machine documentation (in English) Application Haas UMC-500 is a compact yet powerful universal 5-axis machining center designed for the production of complex, multi-sided, and free-form surface parts. Suitable for simultaneous 5-axis machining as well as 3+2 machining, significantly reducing setup operations and ensuring high accuracy. If you have further questions, we are happy to assist.

Condition: excellent (used), Year of construction: 2015, Machine type: 5-Axis Machining Centre (Simultaneous) Year of manufacture: 2015 Control: HAAS CNC control to DIN 66025 X-axis travel: 762 mm Y-axis travel: 508 mm Z-axis travel: 508 mm Max. spindle speed: 15,000 rpm Spindle motor power: 22.4 kW (vector drive) Spindle taper: SK 40 (DIN 69871) Max. torque: 122 Nm (at 2,000 rpm) Table dimensions: ∅ 630 x 500 mm Max. workpiece weight: 300 kg Number of simultaneously controlled axes: 5 C-axis rotation range: 360° continuous B-axis swivel range: -35° / +110° Rapid traverse rates (X, Y, Z): 30.5 m/min Tool magazine (positions): 40+1 (side-mounted) Coolant system capacity: 284 litres Machine weight: approx. 8.2 t Cooling systems: - Through-Spindle Coolant (TSC), 21 bar - Programmable coolant nozzle (P-COOL) - Additional coolant filtration system (25 μm) - Hand rinsing gun with coolant Measuring and probing systems: - RENISHAW probing system (WIPS-R) - Work probe - Tool measurement system Chip management: - Hinged belt chip conveyor Software & Control: Njdpoycuiqjfx Adwekt - High-Speed Machining (HSM) - Ethernet interface - Macros - Coordinate rotation and scaling

Year of construction: 2014, operating hours: 5,316 h, condition: ready for operation (used), Main Drive Spindle speed range 4000 Spindle bore 52 mm Number of axis 3 Movement X-Axis Movement 213 mm Y-Axis Movement ±51 mm Z-Axis Movement 572 mm Turret Tool taper VDI/BOT Tools Nodox D Nzpjpfx Adwskt Number of station 12 This 3-axis HAAS ST-20Y was manufactured in 2014. It features a CNC lathe with C and Y-axis capabilities, a spindle speed of 4000 rpm, and a chuck size of 8 inches. Additional features include a 12-station turret, chip conveyor, and a programmable hydraulic tailstock. Ideal for precision turning operations. If you are looking to get high-quality turning capabilities consider the HAAS ST-20Y machine we have for sale. Contact us for more information about this machine. Application Types Turning

Condition: ready for operation (used), Year of construction: 2021, operating hours: 295 h, controller manufacturer: HAAS, spindle speed (max.): 15,000 rpm, number of axes: 5, This 5-axis HAAS UMC 1500 DUO was manufactured in 2021, featuring a high-speed 15,000 rpm spindle, Din 69871, and a 50+1 side-mounted tool changer. It includes internal cooling at 21 bars, chip conveyor, and full 5-axis capabilities for complex machining tasks. Air through and around spindle. Probe for workpiece measurement and tool setter. Consider the opportunity to buy this HAAS UMC 1500 DUO vertical machining centre. Contact us for more information about this machine. • Sidemonteret værktøjsveksler 50+1 • 21 bars indvendig køling (TSC) Nkodox D I Sgjpfx Adwjt • Top afskærmning • Automatisk værktøjs- og emneudmåling (probing) • Automatisk kalibrering • Dynamic Work Offsets (DWO) • Ethernet interface • Haas Connect • Media Display • 1 GB programhukommelse • Finmasket filter til kølevand • Auxillary filter • Remote Jog håndhjul • Synkrongevindskæring (rigid tapping) • Programmerbar kølevandsdyse • High Speed Machining • Fuld 5-akset Additional equipment • Spåntransportør (chip conveyor)