Used Hacker Knife Suppliers for sale (2,028)

Condition: excellent (used), Year of construction: 2001, Ref: 11019 . 2001 MBO Z2 Mobile Knife Can rotate 180° Nodpfsxnzrbjx Ac Aowd Left or right delivery Specification: Infeed width 15 - 48 cm Infeed length 8 - 32 cm Infeed height 45 - 95 cm Max speed: 160 cycles/h

Condition: good (used), Year of construction: 1971, with magnetic table max. grinding length 2500 mm Nodpfxemccvas Ac Ajwd a frequency converter was retrofitted for infinitely variable speed of the grinding motor also a paper filter was retrofitted for filtering the cooling water

Condition: good (used), 4 pieces of circular shear exchange frames including stands and tools (circular blades + stripper rings and spacer rings) Shaft diameter: 140 mm Band width: 1600 mm Price: 10,000.00 EUR / unit Nwjdpfx Ajw Uqr Sec Aed

Year of construction: 2024, condition: new, Super Dumbbell – the ultimate punching knife with replaceable precision cutting blades Super Dumbbell has a spring type ejector, is equipped with 5 sets of precision spare blades and therefore represents a set of six punching knives in total. It is ideally designed for manual and pneumatic presses. Excellent price-performance-ratio “6 knives for the price of 1” Replaceable precision cutting blades • Japanese carbon steel: ultra-hard – ultra-sharp – maximum cut resistance • Easy replacement • No regrinding • No downtime • Ultra-thin symmetrical cutting blades minimize concave test specimen cross sections (Fig. 1) Nwodpfx Ajki Tqcoc Ajd • No more premature tearing of the test bars • Up to 10 % higher tensile strength or elongation at break values • Extremely smooth cut surfaces of test specimens (Fig. 2) • Always available separately Guarantee for: • High-precision test specimens • Reliable and reproducible test results Ideally suited for: • High polymer materials such as rubber, plastics, etc. • Standards of all kinds, such as ISO, DIN, JIS, ASTM, IEC, etc.

Condition: like new (used), functionality: fully functional, Wadkin Visage blade grinding machine, Machine in excellent condition, extremely little use, condition close to new Can be seen in operation at our premises Nwsdpfxew Dqngj Ac Aod Price includes loading of the equipment Transport and installation possible at extra cost.

Condition: ready for operation (used), Bolt on knife unit To suit a Stahl T50/52 folder- Price £3,000   IN STOCK Nwsdpeq U Trhjfx Ac Aod

Condition: ready for operation (used), IN STOCK stack lift 650 kg Nwedpfxsir A Iqj Ac Aod

Condition: ready for operation (used), MM 360 - 2 up trimmer kit, castings only ! Nwedeir A E Ispfx Ac Aod

Condition: ready for operation (used), To suit a MBO T500, Price £3,000     IN STOCK Nwsdpjir E R Rsfx Ac Ajd

Condition: ready for operation (used), MM 890 trimmer 2 up attachment, castings only ! Nsdpfx Acsir A E Ds Aewd

Condition: ready for operation (used), IN STOCK - 2 up kit to suit Muller Martini three knife trimmer 217/DSS/890 Nwedpjir E R Asfx Ac Ajd

Year of construction: 2021, condition: new, Derryglan Ltd - offer a wide range of industrial washer for every application, food, meat, butcher, bakery, pharma, labs, processors and general industry. Washers for Utensils, Crates, Bins, Knife, Tray cleaning applications. Nwedpsgq N Ezofx Ac Aod JEROS Washers have a specially designed lid which opens fully to allow easy operation and loading without causing backstrain to operators. The special JEROS features provide easy installation of the machines. Even in the smallest production areas. Further, the machine can be used as a sink when not in use as an automatic Utensil Washer. The flush hose The flush hose makes it possible to reuse the wash water e.g. for cleaning the floors. The flush hose can also be mounted on the mixer tap if required. Mixer tap Built-in mixer tap allows washer to be used as a sink with separate drainage. Fulfils the highest hygiene standards Even the most persistent dirt is removed! The fully automatical detergent dispenser ensures the optimum dosage of soap. The powerfull pumps and rotating wash arms provide a brilliant wash result.The end rinse pump guarantees a constant temperature of 85?C during the entire rinse period and sanitisation of the utensils is achieved. An additional advantage of the high temperature rinse is the fast drying of utensils by evaporation, a rinse aid can be automatically added to assist with this process The New Generation The 9100 Series comprises a total of five new models: 9110 / 9115 with rotating wash systems and 9117 / 9120 / 9130 with wash frame system. Inside, the machines have been thoroughly redesigned, focusing on hygiene and easy cleaning. The inside surfaces and rounded to ensure quick and automatic flow of water back to the filter and pumps. Filters, wash arms and wash frames come in electropolished surface finishes leaving the stainless surface completely smooth to prevent dirt from sticking to surfaces of the machine. This makes it easier to clean and maintain the machine Efficiency and optimum hygiene safty, including HACCP, form the base of the JEROS, set of values. Energy saving up to 25 % All the machines are now available with 'i-version' as standard. This means that all machines have water saving rinse nozzles and that both the wash and rinse tanks are isolated, as also the lid is with double wall and isolated. The machines therefore require less operating power, resulting in energy and water savings of up 25 % for all the models. It is also possible now to set the machines to 'auto off', as required, so that they do not have to be left unnecessarily in standby mode if they are not used for prolonged periods of time, etc. Eco wash As standard all models includes an environmentally friendly 'ECO wash' programme for less dirty objects. Pushing 'ECO wash', the machines wash with a reduced wash temperature and use less soap. Still the rinse with 85? C hot water for guarantee of hygienic result New double Micro-Filter: Unique double filtration system, with a progressive micro-fine filter, provides an efficient filtration of the wash water - thus entails a perfect washing result with less soap consumption and minimal water consumption Larger particles are collected in a coarse filter, wereas smaller particles are captured in the self-cleaning micro-fine filter. During the washing/rinse process, the collected particles are drainet out of the micro-fine filter from the bottom, just as well from the surface of water. this ensure a constant optimum wash water quality

Year of construction: 2008, operating hours: 133 h, condition: used, JBM - Wood Chipper Type 630 MDX on Single-Axle Chassis / Car Trailer > Kubota diesel engine 44 kW (60 HP) > Sprung, braked single-axle chassis > Wide feed: 310 x 220 mm > Max. log diameter: up to 220 mm > Adjustable wood chip length: 0 – 25 mm > Weight approx. 1,690 kg > Only 133 hours! > Year of manufacture: 2008 On request, we can provide a leasing or financing offer. Mr. Mihm (phone) will be happy to assist you. Further information can be found on our website. Errors and prior sale excepted. = Further Information = Please contact Tobias Ebert for more details. Nodpfx Aceyxknce Aowd

Condition: new, The ZSH chipper series is specifically designed for forestry, horticulture, and municipal operations. These chippers are primarily used for volume reduction of tree and shrub cuttings as well as smaller trunk diameters. The produced wood chips are suitable for combustion in wood chip heating systems with screw conveyors or as a pre-stage in pellet production. The machines are robust, reliable, easy to operate, powerful, and produce wood chips of consistent quality and uniform size. Nwjdpfoyr Tkfex Ac Ajd Other features Cost-effective solution for wood chip production | Compact design | User-friendly | Low energy consumption

Condition: excellent (used), Year of construction: 2018, operating hours: 4,351 h, functionality: fully functional, machine/vehicle number: W09812219J2D38029, first registration: 10/2025, overall weight: 19,000 kg, color: orange, axle configuration: 2 axles, operation weight: 18,760 kg, empty load weight: 18,760 kg, tire size: 600/50 R22.5 166F, next inspection (TÜV): 01/2026, maximum speed: 80 km/h, drive type: Zapfwelle, number of previous owners: 1, load hours: 4,351 h, crane manufacturer: Palfinger, Equipment: ABS, additional headlights, chaff cutter, compressed air brake, crane, front power take-off, lighting, power take-off driven, trailer coupling, Fully developed hydraulic counter-cutter, developed together with Doppstadt on the vehicle and fully operational! Spare parts supply is ensured by Doppstadt as well as TCS Umwelttechnik GmbH, Austria. - 2-axle trailer - Length: 6,360 mm / Width: 5,039 mm / Height: 5,834 mm - Transport width: 2,539 mm / Transport height: 3,929 mm / Transport length: 6,414 mm - Required power: 250 – 370 kW - Chipping drum: 6 knives Nodpfxjxqgm Ne Ac Aowd - Hardwood trunks up to Ø 480 mm, softwood trunks up to Ø 600 mm - Feed height: 950 mm / Feed width: 1,200 mm - Rotor diameter: 1,000 mm / Rotor width: 1,200 mm / Loading height: approx. 1,400 mm / Infeed width: approx. 2,000 mm - Variable feed speed / closed and robust chipping drum / simple design and maintenance - Variable knife protrusion and easy screen basket change for high-quality wood chips from P16 to P100 (G30 – G100)

Condition: used, mileage: 36,686 km, power: 460 kW (625.43 HP), axle configuration: 8x8, color: red, driver cabin: day cab, gearing type: automatic, emission class: euro6, Year of construction: 2016, Equipment: ABS, EBS, air conditioning, = Additional options and equipment = - Brake system = Notes = For vehicle inquiries, Mr. Seidel will be happy to assist you (Tel. ...). Mercedes-Benz Arocs TUROX Eschlböck Biber 92 Body: Eschlböck Biber 92 Crane: Epsilon S110F104 Axle configuration: 8x8-4 Chipper operating hours: only 1,512h! Many pictures and videos available Nedpfx Acsyfpx Eo Aswd On request, we can provide you with a leasing or financing offer. Mr. Seidel (Tel. ...) will be glad to assist you. You will find more information on our website. ... Subject to errors, changes, and prior sale!!! • Particulate filter • Cab: Short-haul = Further information = Engine displacement: 15,569 cc Gross vehicle weight: 36,000 kg External dimensions: 0x2550x4000 Please contact Tobias Ebert for further information.

Condition: used, Year of construction: 2025, *New machine* Electric rotor with milled knife pockets. Rotor length: 600 mm, rotor diameter: 260 mm. Large hopper measuring 600 x 800 mm. Reliable material feeding with hydraulically controlled slide. Sturdy rubber feet to efficiently absorb vibration. Pusher-down clamp for long and large parts. Large 40 x 40 mm knives for optimal material feed. Special clearing knives prevent lateral jamming. Screen perforation from 10 – 40 mm. Control cabinet including electrical control (Siemens PLC) and star-delta start. Very robust gearbox. Hopper opening: 600 x 800 mm. Hopper capacity: 0.6 m³. Rotor working width: 600 mm. Rotor diameter: 252 mm. Drive power: 15 kW. Rotor speed: 90 rpm. Njdevvi Anopfx Ac Aswd Storage location: Supplier

Condition: used, Year of construction: 2026, Special price - exhibition machine Technical specification WL 4 Hopper opening with log spacer 600 x 1,050 mm Hopper content 0.6 m³ Working width of the rotor 600 mm Diameter of the rotor 252 mm Drive power 18.5 kW Rotor speed 80 -120 rpm Number of knives 28 Type and size of knives concave / 40 x 40 mm, cutting reversible crowns Screen perforation 15-20 mm Painting WEIMA Standard RAL 2002 / 7016 Connected load 400 V +/- 5% / 50 Hz Weight approx. 1,300 kg Including: • Control cabinet* (Rittal) including electrical control (Moeller / Siemens) and star-delta start-up • Rubber vibration elements • V - rotor (patented) with knife pockets milled into the profile • Gear limit switch • Slider cycle • Slider half back • Log spacer hopper • 2. Knife series Storage location: Supplier Nwedpfjytrmzjx Ac Asd

Condition: new, functionality: fully functional, Offered for sale is a semi-moist pet treat production equipment set based on a twin-screw extruder, designed for continuous forming, portioning, and cooling of semi-moist products. The line has been dismantled and is ready for shipment. It was purchased from a supplier and not used in production, but the configuration is equivalent to machinery currently operating in active plants for semi-moist pet treat manufacturing. This system addresses the key process steps that define semi-moist product quality and handling: stable solids dosing into the extruder, controlled shaping and cutting, as well as staged cooling to stabilize texture and reduce sticking or deformation before packaging or further processing. The extruder is of twin-screw design and has achieved production capacities of up to 150 kg/h, depending on recipe and configuration. Product shaping is highly flexible and can be adapted to a variety of product formats; it is suitable for dental sticks, hearts, bones, sticks, strips, and other geometries depending on the die/forming set and cutter configuration. The configuration line has been used for high meat meal or grain-free semi-moist treats as well as vegetarian-type items; final product characteristics depend on recipe, moisture targets, and process parameters. Dry base components are supplied using a volumetric or mass-based dosing feeder, feeding directly into the extruder. This enables steady extrusion and consistent shaping. Downstream portioning is performed with a rotary knife cutter fitted with specialized inserts for clean cutting of semi-moist products. Cut length can start from approx. 5 mm and can be adjusted as required; achievable range depends on settings and the cutter head. The cutter head concept is flexible and can be adapted or redesigned depending on desired final product and surface finish for different shapes and recipes. After forming and cutting, product is conveyed through an initial cooling section with a fan, followed by a conveyor cooler for further stabilization. Cooling is based on ambient forced air, with cooling performance managed by conveyor speed (residence time) and airflow. This two-stage cooling process is optimal for semi-moist products, helping to prevent clumping, deformation, or marking during handling and transport. Nsdpfx Acoycfw Ej Ajwd A notable feature of this line is the mixing head at the extruder outlet, which supports improved mixing and temperature control and enables production of two-color treats (application dependent). The sale also includes the liquid handling package used in semi-moist processing—stainless steel pumps and tanks for water, fats/oils, glycerol, and other typical process fluids. All liquid handling components are stainless steel, meeting hygienic production standards.

Condition: as good as new (ex-display), Year of construction: 2025, showroom machine machine available Advantages: + special rotor with reduced knife protrusion + Motor 22 kW + effective square knife * for pallets: up to 10 pallets per hour * depending on the sieve and material. With smaller residual wood, significantly more. Engine: 22 kW; 400 V - 50 Hz - 3 ph, Sieve: 15/20 mm hydraulically operated slide Current screen perforation (15/20 mm) * can be exchanged Extraction nozzle Ø 200 mm. Feed opening 1000x1000 mm Dimensions: 2000x1800x1645mm Example image above: The color of the system may vary Weight: 1920 kg. Included as standard: - Control cabinet with PLC control - automatic star / delta start - fast hydraulics - automobile. OFF when the rotor is idling - Speed ​​70-90 rpm for high throughput - cycle control to avoid idle times, - performance-increasing step control of the hydraulic slide, - Pertinax guides for hydraulic slides, - vibration-damping machine feet, - CE conform. The following options are available at an additional cost: Nwodpodv Eu Hofx Ac Aod - Additional row of knives + € 2,790 - segment bottom + € 6,890 (recommended for materials with a wall thickness thinner than 3 mm) - Special K-rotor storage + € 3,480 If necessary, consider shredding plastic with sieves smaller than 15 mm or with a lot of fines. If the bearings are lubricated with grease every approx. 4 weeks in operation, this is not necessary) - Raise the shredder by 30 cm (preparation for conveyor belt) + € 2.480 net - Angled conveyor belt (discharge height approx. 220 cm) + € 12.980 net - Overbelt magnet + € 5.980 net - Control conveyor belt and overbelt magnet + € 2.750 net (Start and stop synchronized with the hacker) - Exhibition hopper 1500x1500 mm + € 3.480 net Requirements for the raw material: - The moisture content (atro) must be below 30% - The loading must be free of metals and mineral impurities. This can result in damage to the tools and / or increased wear

Condition: not inspected (used), Year of construction: 2009, functionality: unexamined, machine/vehicle number: 0901 0009, cutting height (max.): 10 mm, nominal flow rate: 3,000 m³/h, table length: 1,900 mm, table width: 1,450 mm, TECHNICAL DETAILS Working area: 1,900 x 1,450 mm Cutting thickness: 10 mm MACHINE DETAILS Knife system: Oscillating drag knife and ultrasonic knife Nwodsyu Ry Nopfx Ac Aed Airflow rate: 50 m³/min Electrical data Voltage: 400 V, 50/60 Hz Number of phases: 3 Ph / N / PE Connected load: 3.5 kVA Main fuse: 16 A Control voltage: 24 V DC EQUIPMENT Vacuum unit conversion to Rovicore RTM vacuum table with distribution channel

Condition: new, functionality: fully functional, Year of construction: 2026, Product overviews of Waste Industrial Timber Wood Pallet Double Shaft Shredder Shredders can generally be used to shred hard-to-break plastics, rubber, large tires, large nylon materials, large pieces of fishing nets, fibers, paper, wood, electrical devices, cables, PET bottles, cardboard, wood, plastic barrels, etc. Solid objects. The main function of the equipment is to squeeze the bulk materials and large-diameter drum metal materials that are not convenient for transportation through the shear of the shredder, and shred them into sheets that meet the requirements. The main structure of the double-shaft shredder is a feed hopper, a knife roller, a driving device, a bearing, a hydraulic system, and an electric control box system. Nwodpfevn D I Nex Ac Asd Working principle: All kinds of waste materials enter the shredding chamber through the feeding hopper. The double-knife rollers do relative rotation to shred and cut the materials, and then the materials are discharged from the shredder to achieve the shredding of large pieces of materials. Applicable materials and fields Double shaft shredder is one of ethential equipment for waste recycling in following fields and materials: +Bulky Waste: Sofa,Mattress,Chair, Funiture,Windows,etc +Industrial Waste: Textiles,Leather,Rubbers, Leathers ,General industrial waste,etc +Hazardous Solid waste: Medical waste,Paint sludge,Radioactive waste,Hazardous waste oil drum,Jumbo bag,etc +Paper waste: Carton,Cardboard,Book,Newspaper,Document,Brochure,Packaging paper,etc +Garden waste: Branch, Wood pallet, Trunks, Boards,etc +Domestic waste +Biomass straw: Straw, Bamboo, Corn, Sorghum straw, Bean straw, Fruit shell, Palm shell, etc +Scrap metal: Car Shell, Aluminum casting, Household appliances, Scrap light metal,Automobile hub,etc +Paper mill waste: Paper mill slag, Paper mill rope, Paper mill offcut,etc +Wood pallet, scrap furniture, waste chair, tree roots recycling, etc. Double shaft shredder main body: The main body is welded with excellent steel plate to ensure the stability of the equipment under heavy load for a long time. Bearing: The bearing seat is split and easy to disassemble, and the movable knife, fixed knife, bearing and other parts can be quickly removed, and it is easy to maintain and replace the knife. The sealing structure can avoid the contact of broken materials and grease, and can also protect bearings and gears when handling liquid materials.

Condition: good (used), Polar Mohr 115 XT Paper Cutting Guillotine This machine is in very good condition, ready for production, after a service inspection. Low mileage. Year of manufacture: 2010. This is the most valued guillotine brand, a flagship product. A jogging and elevator are available for retrofitting. Technical specifications: Cutting width: 1150mm Stack height: 165mm Programmer with a 15″ color touchscreen display Air table Photocells Chrome table surface Ball screw drive for the rear comb Optical cutting line Nsdpeyxr Abjfx Ac Aowd Enlarged side tables Knife change via the control panel Additional rear table guards Weight: 3200kg 380V power supply Includes documentation, a tool kit, a tapping block, a spare knife, and one knife in the machine.

Condition: refurbished (used), functionality: fully functional, The K+G Wetter SM 65 Bowl Cutter with Vacuum is a premium industrial machine designed for the highest quality fine-emulsifying and chopping of meat products. The addition of the vacuum system elevates product quality, making it ideal for high-end sausages, emulsions, and specialty products. Vacuum Advantage & Quality Control Superior Product Quality: The integrated Vacuum System removes air from the product during cutting and mixing. This prevents oxidation, enhances color stability, improves product binding, and significantly reduces air pockets, resulting in a denser, higher-quality final emulsion. High Knife Speed: Features a Knife shaft continuously variable from 50 to 5000 rpm, providing extreme precision to achieve the exact desired texture and fineness. Temperature Monitoring: Includes a precise Temperature monitoring system, giving the operator vital control to prevent product quality degradation. Efficient Mixing: The Mixing cycle return value of 50–500 U/min ensures thorough and gentle incorporation of ingredients, even under vacuum. Power & Operational Benefits Consistent Batch Quality: The variable speeds and vacuum control ensure highly reproducible, uniform results for every 65-liter batch. Heavy-Duty Power: Features substantial Installed Power of 24 kW, providing the necessary force to cut and emulsify tough, chilled, or frozen products efficiently. Nodpfx Aexv Sk Dsc Aowd Safety and Noise Reduction: Includes a Noise protection cover and the knife shaft for a safer, quieter working environment. Hygienic Design: Constructed from stainless steel with a focus on accessibility for maintenance and easy, thorough cleaning, adhering to rigorous industry hygiene standards.

Condition: refurbished (used), functionality: fully functional, The K+G Wetter SM 65 Bowl Cutter is a premium, compact industrial cutter designed for precise and rapid fine-emulsifying, mixing, and chopping of meat products. Its 65-liter capacity and powerful motor make it ideal for high-quality small-to-mid-sized batches. Precision & Cutting Power High Knife Speed: Features a Knife shaft continuously variable from 50 to 5000 rpm, allowing the operator extreme precision to achieve any desired consistency, from coarse chopping to fine emulsification. Temperature Monitoring: Includes a sophisticated Temperature monitoring system, giving the operator crucial control over product quality and preventing denaturing during the cutting process. Efficient Mixing: The Mixing cycle return value of 50–500 U/min ensures thorough and gentle incorporation of ingredients, seasonings, and liquids. Robust Head: Equipped with a high-performance 6-knife head, capable of handling demanding cutting loads. Operational Benefits Consistent Batch Quality: The variable speeds and precise controls ensure highly reproducible results for every batch. Heavy-Duty Power: Features substantial Installed Power of 24 kW, providing the necessary force to cut and emulsify tough, chilled, or frozen products efficiently. Safety and Noise Reduction: Included parts consist of a Noise protection cover and the knife shaft, prioritizing operator safety and a quieter working environment. Nwjdpfxoxv Skqe Ac Aed Hygienic Design: Constructed from stainless steel with a focus on accessibility for maintenance and easy, thorough cleaning, adhering to rigorous industry hygiene standards. Intuitive Control: Features a modern, accessible control panel for easy programming and process monitoring.