Used Hacker Zerhacker Wood Shredder for sale (7,219)

Condition: refurbished (used), functionality: fully functional, The RS97 is one of the best wood chippers in the world. It has been fully refurbished and is equipped with a 160 kW engine. We can also supply a feeding conveyor for the material. All the technical data can be found in the attached data sheet. Hodpfx Akoxyqncerenu

Condition: used, Year of construction: 1999, functionality: fully functional, fuel type: electric, - German-made - Year of manufacture: 1999 TECHNICAL SPECIFICATIONS: Hnodpfx Akjw H Rn Ejrju - feed opening: 600 x 800 mm - rotor diameter: 175 mm - rotor length: 600 mm - total power: 18.5 kW - number of knives: 14 pcs - reversible cutting knives: 30 mm x 30 mm - screen: Ø 15 and 12 mm - AUTOREVERSE - HYDRAULIC RAM - pressing ram height: 180 mm - rotor speed: 80–120 rpm - extraction nozzle diameter: Ø 200 mm - dimensions (L/W/H): 200 x 120 x 160 cm - weight: 1200 kg

Condition: like new (used), functionality: fully functional, Year of construction: 2025, operating hours: 55 h, Machine with special rotor available immediately Advantages: + special rotor with reduced blade overhang, suitable for hard and soft materials + 22 kW motor + effective square blades *for pallets: up to a maximum of 10 pallets per hour *dependent on screen size and material. With smaller wood residues, significantly more. Hnsdpox Af Rdjfx Akrsu Motor: 22 kW; 400 V - 50 Hz - 3 phase, Screen: 15/20 mm or as agreed (10 to 40 mm possible) hydraulically operated slide Screen opening currently (15/20 mm) *can be exchanged Extraction nozzle Ø 200 mm. Feed opening 1000x1000 mm Dimensions: 2000x1800x1645mm Example image above: color of the system may vary Weight: 1920 kg. Included as standard: - Control cabinet with PLC control - automatic star/delta start - fast hydraulics - auto. OFF when the rotor is idle - speed 70-90 rpm for high throughput - cycle control to avoid idle times - performance-enhancing step control of the hydraulic slide - Pertinax guides for hydraulic slide - vibration-damping machine feet - CE compliant The following options are available at an extra cost: - Raise shredder by 30 cm (preparation for conveyor belt) + €2,480 net - Inclined conveyor belt (discharge height approx. 220 cm) + €12,980 net - Overband magnet + €6,980 net - Control for conveyor belt and overband magnet + €2,750 net (Start and stop synchronized with the shredder) - extended feed hopper 1500x1500 mm + €3,480 net Requirements for the raw material: - The moisture content (as received) must be below 25% - The feed must be free of metals and mineral contaminants. Damage to the tools and/or increased wear may result.

Condition: used, Year of construction: 2006, Bruks drum chipper Hnodpfoxr Trnjx Akreu Model 820CM Year of manufacture: 2006

Condition: used, Wood chipper Bruks 1500M IDC000079 - Manufacturer: Bruks Hnodpfx Aet D Dhdjkreu - Chip screen: BS2 - Scraper conveyor - Belt conveyor - Cyclone - capacity: 50 m3/h

Condition: excellent (used), Year of construction: 1993, functionality: fully functional, overall weight: 1,400 kg, fuel type: electric, – year of manufacture: 1993 – documentation TECHNICAL SPECIFICATIONS: – hopper dimensions: 800 x 1000 mm – rotor diameter: 175 mm – rotor length: 800 mm – rotor speed: 90 rpm – V-rotor – main motor: 18.5 kW – number of knives: 18 pcs – rotating cutting knives: 30 mm x 30 mm – screen: diameter 12 mm and 10 mm – AUTOREVERSE – HYDRAULIC DRAWER – height of the clamping drawer: 175 mm Hnodpfx Akogxuvtjrsu – nozzle diameter: diameter 200 mm – machine dimensions (length/width/height): 230 / 140 / 160 cm – weight: 1400 kg

Condition: excellent (used), CATALOG NUMBER 8067 Technical data: - inlet width 400mm - inlet height 200mm - shaft width 540mm - shaft diameter 520mm - knife length 540mm - number of knives 2 pcs - screen dimensions 55x55mm - 2 toothed pull shafts from below - motor for lower shafts 4kW - toothed pull shaft from above - motor for upper shaft approximately 1.5kW - feed belt length 3000mm - feed belt width 400mm - main motor 45kW - automatic reversing (with adjustment option) - dimensions L/W/H 5900x1800x1200mm - weight approximately 3500kg Advantages: - German production - with belt feeder - automatic reversing (with adjustment option) - used shredder, very good condition Net price: 68900 PLN Net price: 16023 EUR, depending on the exchange rate of 4.30 EUR Hedpozuku Eefx Akronu (Prices may vary due to significant fluctuations)

Condition: new, Year of construction: 2025, Wood chips are a common by-product generated by woodworking companies during the manufacturing process. Due to low options for realization wood chips are usually discarded by selling it to heating plants for a low price. Our MM-2000 hammer mill allows companies to turn wood chips into briquettable sawdust by shredding and crushing it through metal screens also known as sieves. Hsdpfx Aofh R I Ajkrenu Quick-release hatches allow quick and easy access for maintenance while keeping workers safe. Blades of the machine are not fixed and spin freely due to the centrifugal principle. This means that blades take less damage on impact and have an extended lifetime. Fixed blades can be ordered if required for specific produce. The mill can be ordered to fit various produce and applications ranging from reducing biomass waste to spice production, chemical and mineral. The perforated sieves and blades are easily interchangeable to adjust for different types of materials and purposes. Free test-mill of material is available on demand. Capacity depends on material Dimensions 1765x960x1060mm. Weight 996 kg. Power 30/37/45kW, 50Hz, 380V.

Condition: excellent (used), Year of construction: 2022, operating hours: 250 h, functionality: fully functional, NSL 130-45B chipper for sale in Poland Zerspaner NSL 130-45B 45 kW Rotor Ø 352 mm Die Einwellen-Zerspaner der NSL-Baureihe zeichnen sich durch eine äußerst robuste Technik aus. Für Holzabfälle in Schreinereien und der holzverarbeitenden Industrie haben sich Zerspaner mit Einwellentechnik am Markt durchgesetzt. Die Zuverlässigkeit und die solide Technologie machen unsere Maschinen zu einer hervorragenden Wahl sowohl für die Industrie als auch für den Handwerker. Der Schneidrotor mit seinen dreh- und auswechselbaren Schneidwerkzeugen liefert eine hohe Zerkleinerungsleistung bei gleichzeitig wirtschaftlichem Energieeinsatz. Bei unseren Zerspanern wird durch eine lastabhängige Schiebersteuerung eine continuierliche Zerspanung ohne Blockaden ermöglicht. Der NESTRO-Zerspaner wird kosmet mit Schaltschrank und 5 m Kabel geliefert, der Schaltschrank ist für eine Wandmontage vorgesehen. Technische Daten: • Spannung / Frequenz: 3-phasig, 400 V / 50 Hz ±5 % • Antrieb / Leistung: 45.0 kW • Abmessung (L x B x H): 2,120 x 1,995 x 1,720 mm • Trichteröffnung: 1,300 x 1,200 mm • Trichtervolume: 1.9 m³ • Rotor Ø / Länge: 352 / 1,320 mm • Rotor-Drehzahl: 80 – 100 U/min • Durchsatzleistung: 1 – 4 faches Trichtervolumen pro Stunde Hodpfxswbpcqs Akrsnu (abhängig von Material u. Sieblochung) • Anzahl der Schneidmesser: 99 (30x30mm) • Absaugstutzen: Ø 250 mm • Gewicht: 3,800 kg

Condition: refurbished (used), Year of construction: 2001, functionality: fully functional, Overworked machine 37 kW Feed opening: 1200 x 1200 mm Rotor length: 1300 mm Rotor diameter: 348 mm Rotor for soft Wood Screen size: 20/25mm Tools: 60 knives: 35x35mm caro and 35x35mm concav Hnodpetxykfjfx Akrsu Controlled by PLC Hydraulic tank size: 20 l fast hydraulic backwards Conveyor belt sector 400mm Second row of knives

Condition: refurbished (used), functionality: fully functional, overall weight: 1,300 kg, WEIMA WL 4 shredder, 18.5 kW Machine for shredding production waste from wood processing, furniture manufacturing, pallets, CLT, particleboard, rubber, and plastics. Mounted on vibration-damping legs. The machine is in fully working condition and has undergone the following repairs: 1. Bearing replacement on the shaft. Hjdpjz En Nrjfx Akrjnu 2. Complete gearbox service with replacement of 3 sets of bearings. 3. Replacement of the sliding rails of the drawer. 4. New rotor knives. New stationary knives. 5. Replacement of the hydraulic pump. 6. New gearbox and hydraulic oils. 7. New hydraulic hoses. 8. New oil filter. 9. Sandblasting and powder coating of the entire machine. Technical specifications: POWER: 18.5 kW NUMBER OF SHAFTS: 1 SHAFT LENGTH (mm): 600 mm SHAFT DIAMETER (mm): 252 mm ROTATION SPEED: 90 rpm NUMBER OF KNIVES: 14/28 SCREEN SIZE: 15 mm MACHINE DIMENSIONS: 200 x 160 x 120 cm MATERIAL: wood waste FEED OPENING DIMENSIONS (mm): 600 x 800 mm WEIGHT (kg): 1300 kg

Condition: new, Year of construction: 2025, Units available in stock! Power 18.5kW Power supply 380V 50Hz Shredding area size 600x595mm Revolutions 98RPM Length 2085mm Width 1248mm Height 1495mm Weight 1550kg VVS-600 is the smallest member of our VVS family of shredders. Single rotor shredders are some of the most universal chipping platforms out there. Best known for shredding various types of wood (Briquettes, hardwood, softwood, lumber), the platform can easily be adapted to numerous other substances such as rubbers, plastics, paper, light metals and general waste. When implemented by woodworking companies into their current lineup this machine can turn woodworking and furniture making waste into briquetteable particles which is easier to store, transport and sell. Our VVS-600 provides you with features found in much more powerful and expensive shredding units while keeping the price down to earth. A couple of them: The horizontal hydraulic ram: - Assists the rotor by pushing the material to provide maximum working area efficiency. - Is controlled by an algorithm to ensure safety and efficiency - Gimbal-mounted hydraulics provide a high lifetime - Enclosed hydraulics to reduce noise, vibrations and increase safety Drivetrain: - The drivetrain is protected against hits from foreign objects by using a twin-disengagement system which is easily resettable and serviceable. Hsdpfx Akjfpa Aworenu - Offset placement of the rotor bearings keeps them away from dust and heat buildup. Rotor: - The centrepiece of the rotor is milled from a single block of high-grade steel. - In case of severe damage to the rotor or its shafts due to a foreign object, the latter can be replaced without the need to replace the whole unit – costs saved for the user! - Blade holders are replaceable – unlike welded-in options, our rotor does not need to be replaced if the blade holders get damaged. - 4-sided rotatable blades – a single blade will last you 4 times as long. - Counter blades can be adjusted to compensate for the increased tolerances once the blades start wearing out – longer runtime with a single set of blades. Output: - Output volume and particle size is controlled by an interchangeable sieve screen which is adapted based on the material used. - The shredded material can be transported out of the machine by using different types of transporters, including air, belt and screw conveyors. Affordable pricing, proven reliability, easy maintenance, warranty, quick service and parts delivery – these are just a couple of reasons to choose our VVS series of shredders.

Condition: excellent (used), CATALOGUE NUMBER 7191 TECHNICAL DATA - inlet of the loading hopper: 870x735mm - working width of the rotor: 720mm - main motor: 18.5kW Hedpfx Akszru Uqjrjnu - pump motor: approximately 0.75kW - number of blades: 17 pcs - blade dimensions: 80x40mm - screen size: 20mm - pressure plate/feed hopper - electric automatic reversing - outlet for shredded wood: diameter 250mm - dimensions (length/width/height): 2000x1350x1370mm - weight: 1586kg ADVANTAGES – pressure plate/feed hopper – very good condition – used wood chipper Net price: 33,900 PLN Net price: 7,884 EUR, depending on the exchange rate of 4.30 EUR (Prices may change due to significant fluctuations)

Condition: new, Year of construction: 2026, Aluminum angled conveyor with substructure Including adjustable feet as well as machine feet for leveling uneven surfaces Horizontal section: 3,500 mm Inclined section: 2,100 mm Inclination angle at bend: 45° Total conveyor length measured on the floor: 5,000 mm Discharge height: 2,000 mm Height of horizontal section: 500 mm Design: Aluminum structural construction - Triple-reinforced profile 135x45 mm - Full-surface discharge sheet 2.0 mm, galvanized Drive drum + tail drum made from S235 steel, welded and machined Ø150x820 mm, crowned, shaft mounted in plummer blocks. Drive: Shaft-mounted gear motor 1.1 kW, belt speed 0.77 m/sec Connection 230/400V, 50Hz, protection class IP54 Drive prewired to motor terminal box (Commissioning must be performed by qualified electricians) PVC conveyor belt DM 15/4 0+007 PVC including PVC wave edge, green Hnodpjyhzhujfx Akreu Belt width: 800 mm 2 pcs. wave edges, 80 mm high, 50 mm wide, high-frequency welded 32 pcs. T-50 cleats, approx. 355 mm spacing Belt material: 2-ply, especially cross-stable At the bend, the belt is guided on both sides by 3 hold-down rollers each. The belt features a 70 mm edge-free zone on each side. Due to the wave edge on both sides, the usable belt width is reduced: Usable width: 490 mm, calculated as follows: (top view) transverse arrangement 100+50+5+490+5+50+100 mm Discover custom solutions for your industry! As an innovative mechanical engineering company, we are proud to offer tailored solutions for the recycling, food, and processing industries. Our extensive product portfolio ranges from conveyor systems and flat conveyors to incline conveyors, angled conveyors, and Z-conveyors. In addition, we manufacture feed hoppers, magnetic separators, overband magnetic separators, drum magnetic separators, and dosing bunkers – all according to our customers’ specific requirements. We understand that every industry and project is unique. That’s why we customize our solutions to your individual needs and specifications. Complex projects are an exciting challenge for us, and we look forward to working with you to develop innovative solutions. With us, there is no such thing as a special solution – we find the right solution for every problem! Challenge us! Contact us and discover how we can transform your requirements into customized solutions. Together, we will shape the future of your production processes! Conveyor, conveyor system, discharge belts, belt conveyor, magnetic separator, overband magnetic separator, recycling, wood chips, plastics, metal-free metal detection, neodymium, overband magnet, magnetic belt separator, lifting magnets, filter rods, magnetic grids, magnetic grate, metal separator, block magnet, filter systems, dosing bunker, feed bunker, filling systems

Condition: new, Year of construction: 2026, Aluminum Angled Conveyor Belt with Substructure including adjustable feet and machine feet for leveling uneven surfaces Horizontal section: 2,500 mm Inclined section: 6,000 mm Incline angle at the bend: 45° Height of the horizontal section: 350 mm Total conveyor length measured on the floor: 6,750 mm Discharge height at the end of the conveyor: 4,500 mm Design: Aluminum construction - Double profile reinforced 90x45 mm - Full-surface discharge sheet 2.0 mm galvanized Drive drum and return drum S235 steel, welded and machined Ø100x620 mm crowned and turned, shaft fixed with pillow block bearings. Drive: Shaft-mounted gear motor 1.10 kW, belt speed: 0.53 m/sec Hjdpsyhzhzsfx Akrjnu Electrical connection 230/400 V, 50 Hz, IP54 protection class Drive supplied ready for connection up to the motor terminal box (Commissioning must be carried out by a qualified electrician) PU conveyor belt DM 10/2 0+005 PU including wave edge PU petrol matte Belt width: 600 mm 2 pcs wave edges 50 mm high, 25 mm wide, high-frequency welded 42 pcs T-40 cleats, 400 mm long, approx. 401 mm spacing Belt material: 2-ply, highly cross-stable In the bend area, the belt is guided on both sides by 3 hold-down rollers each. The belt features a 70 mm edge-free zone on both sides. Due to the wave edges, the usable belt width is reduced: Usable width: 300 mm, as follows: (top view) cross section 70+25+5+400+5+25+70 mm Special features: Belt guidance via PVC wedge strip on the running surface profile - 10x6 mm - Including widened substructure for improved stability against top-heaviness - Including cut-out in the discharge sheet - Including sliding guides in drive and return drums - Including magnet-free zone in the area of the overbelt magnet separator - Including bracket for DMPM1200 in the inclined section Discover customized solutions for your industry! As an innovative mechanical engineering company, we are proud to offer tailor-made solutions for the recycling, food, and further processing industries. Our comprehensive product portfolio includes everything from conveyor belt systems, flat conveyors, inclined conveyors, and angled conveyors to Z-conveyors. In addition, we manufacture feed hoppers, magnetic separators, overband magnet separators, drum magnets, and dosing bunkers – all custom-built to our customers' specific requirements. We understand that each industry and project is unique. That is why we individually adapt our solutions to your specifications and requirements. Complex projects are an exciting challenge for us, and we look forward to developing innovative solutions together with you. For us, there are no special designs – we find the right solution for every challenge! Put us to the test! Contact us and discover how we can transform your requirements into bespoke solutions. Let’s shape the future of your production processes together! Conveyor belt, conveyor system, discharge belts, belt conveyors, magnetic separator, overband magnet separator, recycling, wood chips, plastics, metal-free, metal detection, neodymium, overband magnet, magnetic belt separator, lifting magnets, filter rods, magnetic grids, magnetic grates, metal separator, block magnet, filter systems, dosing hoppers, feed hoppers, filling systems

Condition: refurbished (used), Year of construction: 2020, operating hours: 1,400 h, functionality: fully functional, Wood chipper DH600-18.5KW, rotor width 600mm, rotor diameter 222mm, 28 blades, concave, 4 brush cutters, hydraulic pusher, built in 2020, completely factory overhauled Hnjdpfx Akov Iq Ebjrju

Condition: new, Year of construction: 2026, functionality: fully functional, power: 18.5 kW (25.15 HP), overall weight: 1,820 kg, 1 new hopper-type shredder DH 600, 18.5 kW Rotor width: 600 mm Rotor diameter: 220 mm Number of knives: 28, concave ground, four-way reversible Hnjdpfx Aomv Eh Nokreu Motor power: 18.5 kW Electrics: 400V, 50 Hz Control: control cabinet, fan-cooled, Siemens PLC Hopper opening: extended hopper Hopper volume: approx. 0.60 m³ Screen: 20/25 mm or as required Hydraulics: 40-liter tank, external gear pump Dimensions: 1750 x 1280 x 1650 mm Weight: 1820 kg Throughput: 1–3 m³/h, depending on material and screen size Extraction nozzle: 160 mm Extraction capacity: min. 28 m/s

Condition: excellent (used), Year of construction: 2001, CATALOGUE NUMBER: 7089 TECHNICAL DATA - Inlet of the loading hopper: 1020x1230mm - Working width of the rotor: 1020mm - Rotor diameter: 348mm - Main motor: 22kW, 400V, 50Hz - Pump motor: 0.75kW - Number of knives: 50 pcs - Knife dimensions: 35x35x20mm - Screen mesh: 12mm - Pressing drawer - Electric automatic reversing - Dimensions (L/W/H): 2000x1130x1530mm - Weight: 970kg ADVANTAGES – Automatic reversing – Similar to WEIMA WL 10 – German made – Pressing drawer Hodpjztau Sjfx Akrjnu – Very good condition – Used shredder, DTR+CE documentation Net price: 99,900 PLN Net price: 23,233 EUR, depending on the exchange rate of 4.30 EUR (Prices may vary due to significant fluctuations)

Condition: as good as new (ex-display), Year of construction: 2022, operating hours: 20 h, Shredder typ PYTHON 1300, with 7 KW electricmotor, 400V 50Hz• • Hopperopening 1300 x 700mm • Main dimensions L 2100 x B 850 x H 1600mm • Outlet opening ca 400x 100mm • Height under output ca 400mm • Electric cabinet, mainswitch, selector switch aut/man. ON/OFF switch, Emergency Push button • Easy handling/ transport by forktruck or lifting eyes • Weight ca 1100 kg • Machine Manual incl.. • Paint in RAL 3002 and RAL 7022 • (subject to technical changes) • CE certified and “Made in Holland” Hodpof N Nk Hofx Akronu

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, total length: 4,500 mm, total width: 3,375 mm, WEIMA Crusher Series HWV 3000 (37 kW) and the Single-Shaft Shredder WL12 (30 kW) Ideal for pre-shredding wood waste such as pallets, followed by metal separation and secondary shredding. Advantages: Two-stage process: Pre- and post-shredding for maximum efficiency. Versatile use: Wood chips for heating systems or briquetting presses. Low-noise operation Technical details – HWV 3000: - Power: 37 kW - Dimensions (hopper): 3375 mm width x 1630 mm height Hedpsy Ubvpefx Akronu - Cutting knives: 58 knives in two rows Technical details – WL12/30: - Power: 30 kW - Shaft diameter: 368 mm - Screen: 15/20 mm Applications - Wood waste processing and recycling - Energy generation through wood chips or briquetting

Condition: new, Year of construction: 2026, Engine power 18,5 kW rotor diameter 248mm Number of cutting edges 17 pieces indexable inserts Feed opening 624 x 792mm Suction nozzle 160mm left or right suction possible weight approx. 1300 kg Hedpfx Akjnzh T Tsrenu Perforated screen 15/20mm Outer dimensions approx. 1740 x 1220 x 1670mm LxWxH

Condition: new, Year of construction: 2023, functionality: fully functional, power: 294.2 kW (400.00 HP), overall weight: 9,000 kg, fuel type: diesel, operation weight: 9,000 kg, empty load weight: 9,000 kg, gearing type: mechanical, loading space width: 2,450 mm, loading space length: 3,000 mm, loading space height: 2,500 mm, Stationary wood chipper Heizohack HM 14 800 K. Their biggest model of chipper with 14 knives and large drum. Machine is new with 0 operating hours. Industrial wood chipper capable of chipping all types of wood from hardwood to softwood. Wood logs and wood cutting waste. Infeed width 1200 mm Infeed hight 800 mm (effective chipping around 600 mm) Hnedpfx Akjztqcyereu Knives model blades: 95x50 mm (possible installation of thicker knives 7 and 9 mm with installation of thicker knife holders) Maximum chipping diameter: 60 cm (possible more with turning the log) Chipping capacity per hour aprox: 120 m3/h (some customers achieve more) Ejector control automatic with 3.5 m height. Can fill any type of trailer. Machine is ready for production, no installation needed. For more information feel free to contact us.

Condition: excellent (used), functionality: fully functional, feed hopper 169x123 cm hydraulic pressure drawer control from control panel motor power 15 kW shaft width 600 mm Hnedpsy Sgd Tofx Akrou

Condition: excellent (used), Catalog number: 8089 TECHNICAL DATA - Inlet width: 400mm - Inlet height: 170mm - Shaft width: 430mm - Number of knives on the shaft: 4 pcs - Feed rollers, toothed, top and bottom: 2 x 1.73kW - Screen: 25x25mm - Automatic reversing with adjustable settings - Vibrating conveyor: 1.5kW - Length of vibrating conveyor: 3250mm - Width of vibrating conveyor: 380mm - Main motor: 45kW - Overall dimensions of vibrating conveyor: 3250x750x1100mm - Overall dimensions of shredder (length/width/height): 2400x1400x1400mm - Total weight: approximately 3000kg ADVANTAGES Hnsdpfx Aez Eaypskrsu – Vibrating feeding table – Automatic reversing with adjustable settings – Shaft with 4 knives – Produced by the Polish brand OSKA – DTR + CE documentation – Unpainted – Used shredder, very good condition Net price: 96900 PLN Net price: 22535 EUR, depending on the exchange rate of 4.30 EUR (Prices may vary due to significant fluctuations)

Condition: good (used), Year of construction: 1993, Vecoplan drum chipper VTH 75 / 22 / 5. Infeed dimensions: width 750 mm, height 220 mm. Motor: 75 kW. Hnjdpfx Aoxr Tp Hskrou