Used Hacker Zerhacker Wood Shredder for sale (16,757)

Condition: new, Year of construction: 2024, Single-shaft shredder HOKUTech special offer model H600 Compact, robust, high throughput The H600 high-performance shredder with its flexible application options can process all types of wood-based materials (hardwood, softwood, chipboard, MDF materials, plywood, veneer residues, etc.) into chips and achieves an enormous reduction in the volume of bulky materials. The hydraulically controlled pusher feeds the wood waste to be shredded into the cutting area of the rotor and is controlled automatically and load-dependent. The high-performance solid steel electric rotor has a diameter of 252 mm and operates at a rotor speed of 85-95 rpm. The concave-ground, aggressive and 4-way rotating knives / reversible cutting crowns are located in milled knife pockets on special knife carriers. This highly efficient system guarantees high throughput, low energy consumption and optimum discharge of the shredded material by reducing the cutting gap between the counter blade and the rotor. Chip size (10 - 60 mm) Technical data: - Hopper opening - Hopper capacity - Working width of the rotor - Diameter of the rotor - Drive power - Rotor speed 600 x 800 mm 0.6 m3 600 mm Dwsdeutmw Hjpfx Addof 252 mm 15 kW 90 rpm Location: Comes to stock 54634 Bitburg - available by arrangement -

Condition: good (used), On offer: A wood shredder by Weima Brand: Weima Model: -- Machine type: Wood shredder / chipper Feed hopper: Large industrial hopper for wood waste Shredding system: Rotor with knife assembly (typical Weima design) Material: Solid wood, panel offcuts, trimmings, scrap Construction: Heavy-duty, welded industrial steel frame Hydraulics: Available (push system for material feed and maintenance) Drive: Electric drive (data available upon nameplate information) Discharge: Wood chips / shredded wood waste Dwjdpex Dx Apofx Addof 2 screen baskets, one in as-new condition Includes several additional new blades

Condition: refurbished (used), functionality: fully functional, The RS97 is one of the best wood chippers in the world. It has been fully refurbished and is equipped with a 160 kW engine. We can also supply a feeding conveyor for the material. All the technical data can be found in the attached data sheet. Dwsdpfx Adoxyqncjdof

Condition: excellent (used), Year of construction: 2006, Residual Wood Shredder Djdpfx Aox Dinvsddowf Manufacturer: Untha Model: LR 630 Year of manufacture: 2006 Operating hours: approx. 5,241 h Power: 18.5 kW Hopper opening: 624 x 792 mm Hydraulic feed Number of knives: 17 Rotor diameter: 248 mm Screen diameter: 20 mm Dimensions: 1,740 x 1,170 x 1,680 mm Weight: approx. 1,300 kg An additional set of new cutting knives included.

Condition: excellent (used), Catalogue number 7259 TECHNICAL DATA - Infeed width: 400 mm Dwjdpfxerit Nlj Addjf - Infeed height: 200 mm - Shaft width: 530 mm - Shaft diameter: 550 mm - Knife length: 530 mm - Number of knives: 2 pcs - Screen dimensions: 50x50 mm - 2 lower toothed feed shafts - Lower shaft motor: 2.2 kW - Upper toothed feed shaft - Upper shaft motor: 2.2 kW - Conveyor belt feeder: 0.55 kW - Feeder belt length: 3000 mm - Feeder belt width: 410 mm - Main motor: 45 kW - Auto-reverse - Reverse operation - Machine dimensions (L/W/H): 2900x1600x1600 mm - Feeder dimensions (L/W/H): 3070x720x670 mm - Weight approx. 3500 kg ADVANTAGES – German manufacture – Auto-reverse (adjustable) – Reverse function – Used shredder in very good condition Net price: 85,900 PLN Net price: 20,450 EUR depending on exchange rate 4.2 EUR (Prices may change with significant exchange rate fluctuations)

Condition: good (used), Year of construction: 1996, 4-shaft shredder from renowned manufacturer Untha, type RS 30 Dsdpfxsxpn Hno Addewf 2 x 7.5 kW Function tested

Condition: new, Year of construction: 2025, Weima chipper / shredder WL 8 The WL 8 single-shaft shredder is a proven classic for shredding all types of wood waste. It is used, for example, thousands of times in wood-processing plants all over the world. The high quantity of these highly demanded shredders guarantees a proven and reliable technology at the best price-performance ratio. The machines are characterized by their very robust design, which ensures an extremely long service life (even outdoors). Intuitive operation thanks to Siemens PLC control with touch display. To ensure that the electronics are optimally matched to the machine, we design, build and wire our control cabinets ourselves. We only use high-quality components - for example from Siemens or Rittal. Intuitive touch interfaces guarantee quick adjustments. Functions such as setting the slider clock or stop ensure high throughput. The built-in overload protection also prevents defects in the machine. No material bridges due to free-cutting hopper design The hopper fulfills several tasks at once. First, the material to be shredded is fed through it - manually, mechanically, or by conveyor belt. The generous opening makes it easy to fill even very large parts. However, its special design, which is rounded at the front and thus effectively prevents material bridges, is decisive for shredding. Even with bulky parts, the shredder cuts itself free. If required, both hopper extensions and lids with gas pressure springs are available. Durable rotor bearings thanks to offset design A rotor bearing must be particularly robustly built due to the extreme stresses it is subjected to during shredding operation. To prevent dust or foreign matter from getting inside it, we have set it apart from the machine frame. This also makes it very maintenance-friendly and easy to access. Rotor diameter (mm): 260 Rotor length (mm): 1000 Dedpopdqzxefx Addewf Rotor speed (rpm): 80 - 125 Power (kW) 22 Number of knives: 54 Available knife sizes (mm): 40 x 40 Grain size (mm): Suction port (mm): 200 Feed opening (mm): 1000 x 1250 length (mm): 2045 width (mm): 1740 height (mm): 1840 Weight (approx. kg): 2200 Accessories: - 2nd row of knives - logspacer Location: Ex stock 54634 Bitburg - immediately available -

Condition: good (used), Year of construction: 1994, - quantity of knives 4 - lenght of knives 720 mm - diameter of drum 900 mm Dedpfx Adjw U Diwedowf

Condition: good (used), Year of construction: 2006, functionality: fully functional, Heinola chipper TT-75 RS year 2006 infeeding with vibra conveyor 6 m long 600 mm width + 1 year old magnetic. Dwsdpfxsxrcgze Addof

Condition: good (used), Year of construction: 1993, Vecoplan drum chipper VTH 75 / 22 / 5. Infeed dimensions: width 750 mm, height 220 mm. Motor: 75 kW. Dwedpfx Asxr Tp Hjddof

Condition: excellent (used), CATALOG NUMBER 7176 TECHNICAL DATA - Loading hopper inlet: 1050x600mm - Outlet for shredded wood: 160mm diameter - Rotor working width: 590mm - Main motor: 18.5kW - Pump motor: 0.75kW - Number of knives: 14 pcs - Knife size: 30x30mm - Screen: 10x12mm - Pressing drawer - Electric auto-reverse - Dimensions (LxWxH): 1900x1200x1530mm - Weight: 990kg ADVANTAGES Dwsdpep R I Nljfx Addef – Auto-reverse – German manufacturing – Unpainted – Like WEIMA WL4 – Pressing drawer – Very good condition – Used shredder Net price: 48,900 PLN Net price: 11,640 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (In case of significant exchange rate fluctuations, the price may change)

Condition: excellent (used), functionality: fully functional, WOOD SHREDDER machine model MION e MOSOLE TR 2 second hand machine machine operation in automatic and/or manual mode working condition : Excellent In automatic mode, the motor starts in the opposite direction to free the pusher from any residues from previous work. after about 5 seconds ( in fully automatic mode ) the motor stops and restarts in the correct direction for continuous processing (see the video). technical details : hydraulic pusher lengthh rotor mm.700 rotor diameter mm.300 rotation speed of the rotor rpm 100 Dsdpfxow Hwpvo Addswf hopper content 3,42 m³ main motor power Hp 25 (kw 18) hydraulic power unit motor pusher Hp 1 interchangeable knives Feeding from top

Condition: excellent (used), Year of construction: 2017, Weima Wood Shredder - Walking Floor Shredder - Low-Noise and Slow-Running Top condition - only 150 operating hours - Type: WL 600 Shaft diameter (mm): 260 Knife length (mm): 600 Knife shaft speed (rpm): 80 - 125 Number of knives (pcs): 14 Max. granulate size (mm): 20/25 Opening (mm): 600 x 800 Extraction port diameter (mm): 160 Motor power (kW): 15 Voltage (V): 400 Working height (mm): 1645 L x W x H (mm): 1,805 x 1,118 x 1,645 Weight (kg): 1,100 Dwodpfx Asxiq Syeddof Location: ex-stock 54634 Bitburg - available immediately - Subject to prior sale

Condition: good (used), Year of construction: 1998, Shredder with 1 m rotor width, ideal for pallets. Rotor diameter 300 mm with 24 knives. 22 kW motor. Equipped with discharge auger. Extraction connection 250 mm. Screen perforation 25 mm. Dwjdoxzpzdspfx Addef

Condition: as good as new (ex-display), Demonstrator with 7 operating hours Dedpfx Adjv Sqrpsdjwf Another machine available immediately (ex works in Neckartailfingen) MRZ 830 Shredder Custom tariff number: 84659600 Feed opening 800 x 1000 mm Motor: 18.5/22 kW; 400 V - 50 Hz - 3 ph Blades: multi-rotatable Hydraulically operated slide gate Screen perforation of your choice (10 - 40 mm) Weight approx. 1,600 kg Dimensions (L x W x H) approx. 2,290 x 1,420 x 1,750 mm Turbo clutch Included as standard: - Automatic star/delta start-up - Fast hydraulics - Auto. OFF when the rotor is idle - Speed 70-90 rpm for high throughput - Cycle control to avoid idle times - Performance-enhancing step control of the hydraulic slide - Pertinax guides for the hydraulic slide - Vibration-damping machine feet - CE compliant . The shredder is designed for shredding natural wood, particle board, and MDF, as well as other materials after testing and approval by the manufacturer. Included: - Raise the shredder by 30 cm (prepared for conveyor belt) Additional shredder options: - Articulated conveyor belt + €8,770 net Horizontal section: 1,200 mm Rising section: 2,500 mm Angle: adjustable from 0-60 degrees Discharge height: approx. 2,000 mm + - 100 mm - Overbelt magnet + €6,780 net - Conveyor belt and overbelt magnet control + €2,750 net (Start and stop synchronized with the shredder) Raw material requirements: - The moisture content (dry) must be below 30% - Metals and mineral contaminants such as sand, stones, etc. lead to increased wear

Condition: used, Year of construction: 2006, Bruks drum chipper Model 820CM Year of manufacture: 2006 Djdpfxexr Trnj Addjwf

Condition: used, Year of construction: 1997, functionality: fully functional, machine/vehicle number: 5020, power: 45 kW (61.18 HP), Stationary wood chipper with 45 kW electric motor. The Hackkontrol HC 960 control system was replaced two years ago. This control regulates feed-in when the speed drops and can be adjusted as needed. The wiring in the connection box was also overhauled two years ago, so the chipper can be connected using a cable with a minimum of 100 Ah, preferably 125 Ah, and can be put into operation directly. The chipper is robustly constructed and fully operational. Machine documentation is available and spare parts are still readily obtainable. Dedpoxy Rrzjfx Addswf

Condition: as good as new (ex-display), Year of construction: 2024, operating hours: 1 h, functionality: fully functional, machine/vehicle number: SH12005, Untha LR 630 Chipper Operating Hours: 1 h Demonstration Machine Ma. No. SH12005, Year 2024 Item Number: JA_G250303 Description Feed Opening: 624 x 792 mm Hopper Capacity: 0.43 m3 Rotor Diameter: 248 mm Speed: 98 rpm Power: 400V/50 Hz, 18.5 kW Blades: 17 Screen Hole: 15-20 mm Suction Nozzle: 160 mm Weight: Approx. 1300 kg Dimensions (W x D x H): 1740 x 1220 x 1670 mm Cable Harness: 3 m + Connection for Screw Discharge Subject to errors and changes in technical specifications. Note for new machines: • Prices are for pickup (unless otherwise stated!) from our location in Ottendorf-Okrilla, Germany - Free shipping! (unless otherwise stated) Dsdpsv Tbqlsfx Addowf • Subject to prior sale! • You will receive an invoice with VAT shown. • The buyer is free to inspect the items at the location. • Our general terms and conditions apply. • Special agreements are only possible in writing. • Any items in the background of the image are not included in the scope of delivery. • Saw blades are for illustrative purposes only and are not included in the scope of delivery. Shipping options: • We would be happy to provide you with a transport quote. • Pickup from our location in Ottendorf-Okrilla, free of charge upon request. (Assembly and instruction of the goods for demonstration purposes is optionally available upon request!) • Optionally, our trained service staff will assemble the machine at your location and provide you with a brief instruction. Travel, driving, and service times are subject to an additional charge.

Condition: excellent (used), CATALOG NUMBER 7102 TECHNICAL DATA - Infeed width: 400mm - Infeed height: 180mm - Shaft width: 430mm - Shaft diameter: 430mm - Knife length: 430mm - Number of knives: 2 pcs - Screen dimensions: 18x18mm - Bottom toothed feed shaft - Lower shaft motor: 0.75kW - Top toothed feed shaft - Upper shaft motor: 0.75kW - Belt feeder - Feeder belt length: 3260mm - Feeder belt width: 400mm - Main motor: 38kW - Autoreverse - Extraction port diameter: 250mm - Overall dimensions (L/W/H): 5200x1400x1870mm, weight: 2020kg – German manufacture – Autoreverse (adjustable) – Used chipper, in very good condition Dwodpfonwmr Uox Addef Net price: 63,900 PLN Net price: 15,200 EUR (based on exchange rate 4.2 EUR) (Prices may change with exchange rate fluctuations)

Condition: good (used), Year of construction: 1993, Rotor width 800 mm Dwjdpfx Adep H Sv Dedof 22 kw motor 20 knives on rotor 25 mm concave There is also a wooden frame to put the chipper higher so that a conveyor belt fits in below

Condition: new, Year of construction: 2023, The ideal machine for shredding hardwood and softwood Another machine, available immediately (ex works Neckartailfingen) . Motor: 18.5 kW; 400 V - 50 Hz - 3 ph, Knives: 14+2 pieces, 40x40mm, multiple rotatable, Dwedpfx Adsd E R D Ssdef Rotor diameter: 260 mm, Control: Omron SPS, Cutting unit opening 600 x 800 mm, hopper volume approx. 0.6 qbm, hydraulically operated pusher Screen perforation of your choice (12 - 40 mm) Suction nozzle Ø 160 mm Weight approx. 1,300 kg Dimensions (lxwxh) approx. 1737 x 1167 x 1650 mm . The following options are available at extra cost: - Additional row of knives + 995 € net (28 instead of 14) - Surcharge for 4-sided segment shelf + € 2,170 net (prevents blocking of the pusher. Recommended for materials with a thickness of less than 3 mm) - Raise shredder by 30 cm (preparation for conveyor belt) + € 1,980 net - Angled conveyor belt (discharge height approx. 220 cm) + €8,770 net - Overbelt magnet + € 5,980 net - Conveyor belt and overbelt magnet control + € 2,750 net (start and stop synchronized with the chipper) - Special bearing +1,540 € (rarely required. Closed, even more stable rotor bearing. Possibly a consideration for sieves smaller than 15 mm or with a lot of fines. Not necessary if the bearings are lubricated with grease every approx. 2 weeks during operation) . Requirements for the raw material: - The moisture content (atro) must be below 30 % - Metals and mineral impurities such as sand, stones etc. lead to increased wear. . We will be happy to carry out a free test with your material and invite you to visit us in Neckartailfingen. It is also possible for you to send us your material by freight forwarder and we will document the test with pictures and videos.

Condition: like new (used), main motor power 15 kW pump motor power 2.2 kW feed hopper 150x80 cm hopper height 160 cm pressure drawer Djdpfexv U E Rex Addewf shaft length 700 mm year of manufacture 2001 CE marking

Condition: excellent (used), Catalogue number 7260 TECHNICAL DATA - Charging hopper inlet: 870x730 mm Dodporit Ruofx Addswf - Rotor working width: 710 mm - Main motor: 18.5 kW - Pump motor: 0.75 kW - Number of knives: 19 pcs - Knife size: 75x40 mm - Screen: 15 mm - Pressing drawer - Electric auto-reverse - Outlet for shredded wood: diameter 250 mm - Dimensions (L/W/H): 2350x1400x1670 mm - Weight: 1360 kg ADVANTAGES – Pressing drawer – Very good condition – Used shredder Net price: 37,900 PLN Net price: 9,020 EUR depending on the rate of 4.2 EUR (Prices may change in case of larger fluctuations)

Condition: new, Year of construction: 2025, production time appr. 4 months * for suction perception, see picture 4 and 5 Tariff number: 84659600 Main motor: 55 kW; 400 V - 50 Hz - 3 ph including turbo coupling, Hydraulic motor: 2.2 kW, 400 V - 50 Hz - 3ph Knife: 76 pieces, rotatable Knife size: 35 x 35 x 20 mm Rotor diameter: 360 mm Control: PLC Siemens S7-1200 Funnel opening approx. 1530 x 1235 mm Hopper volume approx. 2.5 square meters hydraulically operated slide Screen perforation: 10 - 30 mm Extraction nozzle Ø 200 mm Weight approx. 4,500 kg Dimensions (lxwxh) approx. 2765 x 2520 x 1730 mm Turbo coupling Dwodpfx Adod Hkqhsdof Included as standard: - V-rotor for other throughput - 2nd row of knives on the rotor - Control cabinet with Siemens PLC control - automatic star / delta start - fast hydraulics - Automobile. OFF when the rotor is idling - Speed ​​70-90 rpm for high throughput - Clock control to avoid idle times - Performance-increasing step control of the hydraulic slide - Pertinax guides for hydraulic slides - anti-vibration machine feet - CE conformity The shredder is for shredding natural wood, chipboard and MDF board other materials after testing and approval by the manufacturer Recognition from the raw material: - The moisture content (atro) must be below 30% - Metals and mineral impurities such as sand, stones, etc. Interests to interests wear

Condition: new, Year of construction: 2026, Delivery time approx. 3-4 months MRZ 830 Shredder Custom tariff number: 84659600 Feed opening 800 x 1000 mm Motor: 18.5/22 kW; 400 V - 50 Hz - 3 ph Blades: multi-rotatable Hydraulically operated slider Screen perforation of your choice (10 - 40 mm) Suction nozzle Ø 200 mm Weight approx. 1,600 kg Dimensions (L x W x H) approx. 2,290 x 1,420 x 1,750 mm Turbo clutch Included as standard: - Automatic star/delta start-up - Fast hydraulics - Auto. OFF when the rotor is idle - Speed 70-90 rpm for high throughput - Cycle control to avoid idle times - Performance-enhancing step control of the hydraulic slide - Pertinax guides for the hydraulic slide - Vibration-damping machine feet - CE compliant . Dodpfxjd Dgw Uo Addowf The shredder is designed for shredding natural wood, particle board, and MDF, as well as other materials after testing and approval by the manufacturer. Additional shredder options: - Raise shredder by 30 cm (prepared for conveyor belt) + €2,140 net - Articulated conveyor belt + €8,770 net Horizontal section: 1,200 mm Rising section: 2,500 mm Angle: adjustable from 0-60 degrees Discharge height: approx. 2,000 mm + - 100 mm - Overbelt magnet + €5,980 net - Conveyor belt and overbelt magnet control + €2,750 net (Start and stop synchronized with the shredder) Raw material requirements: - Moisture content (dry) must be below 30% - Installation temperature: temperature-controlled room at least +5°C - Metals and mineral contaminants such as sand, stones, etc. lead to increased wear