Used Hacksaw for sale (78)

Year of construction: 2002, condition: reconditioned (used), Beam cutting, drilling and marking line DISC SAW Brand: KALTENBACH Model: HDM 1431 / T13 / SP-CNC Year 2002 Serial number: 122.400 Weight without accessories: 10,980kh - Disc saw with downward cut. - Geared saw unit, drive system and saw blade on wear-resistant swivel bearing. - Heavy saw gear with pinions in oil bath, with inclined teeth, hardened and sharp. - Hydraulic advancement of the saw blade, adjustable according to the table, very fast recoil. - Hydraulic horizontal clamping device. Rear clamping jaw with long-stroke clamping cylinder and automatic recoil limitation. - Vertical clamping block with self-adjusting push plate. - Oblique cutting device to adjust the angle from 45° to the left to 35° to the right. - Material sensor to automatically switch from rapid advance to work advance. - Hydraulically elevating feed roller for optimum material transport on the saw table. - Economical lubrication by means of a micro-dosing installation, especially suitable for sawing profiles. - Chip collector installed on the machine bench. Specs: - Cutting disc housing: 100x4x30x250mm - Cutting disc diameter: 1,430mm - Cutting width: 9.5mm - Cutting speed: 10 to 20m/min. - Saw advance speed: 0-400mm/min. - Fast reverse speed: 2000mm/min. - Total power: 25KW - Working height: 640mm Cutting capacities: 90º cut - Angle steel: 250mm - Steel in U: 400mm - Double T-beam: 600mm - Wide flanged beam: 1008x302mm - Special wing beams: 1000x450mm Cut to degrees: IPBv beam - 75º: 1008x302mm - 60º: 910x302mm - 45º: 716x304mm - 40º: 716x304mm - 35º: 478X307mm IPBs beam - 75º: 1008x402mm - 45º: 524x357mm IPE beam - 45º: 600x220mm DRILLING UNIT Brand: Kaltenbach Model: KDX1215 Serial number: 122.401 Work capabilities: - Angular steel (minimum - maximum): 80x65x10mm - 250x250x28mm - Steel in U (minimum - maximum): 80x45mm - 400x110mm - Double T beam (minimum - maximum): 80x46mm - 600x220mm - Wide flanged beam (minimum - maximum): 100x100mm - 1,008x302mm Dwodpfxjhzbipj Addsf - Extra wide wings beam: 1,200x500mm Drilling units: 3 - Vertical (Y axis) 1 pc. - Horizontal (Z and W axes) 2ud. Drilling diameters: 8 - 40mm RPM: 150 - 1100 Fast forward - Fast reverse: 3,850mm/min. - 8,000mm/min. Drilling spindle feed rate: 0-500mm/min. Fast spindle positioning tool: 15,000mm/min. Automatic tool changer: 5 u. in each drilling unit. 3x5 u. = 15 total Total power: 45KW MARKING UNIT FEEDING: 26 METERS OF ENTRY WITH BEAM FEEDER + 6 SIDE ARMS FOR BEAM ENTRY IN PARALLEL TO THE ROLLER TRACKS 30 METERS OF ROLLER TRACKS WITH OUTPUT + 6 SIDE ARMS 4 SIDE ARM FOR SMALL PIECES THE GREAT MAJORITY OF ROLLERS ARE MOTORIZED It occupies approximately 60 linear meters between input and output power. *Request machine installation plans.

Condition: good (used), functionality: fully functional, Pedrazzoli disc saw, working, 300 mm disc diameter, angled cutting capacity Dwjdpfx Adev S I S Tsdsf

Condition: new, Year of construction: 2024, machine/vehicle number: 2024, STEEL CUTTING MACHINE with ONLINE-PC-STEUERUNG350 fully automatic steel cutting machine for reinforcing steel cutting in a single - or double cut according to requirement. Optimized cutting with residual lengths. The system consists of an automatic Vorlegemagazin with 12 seats, a hacksaw and a belt conveyor to the removal of cut-to-length steel profiles. Rest lengths to promote after length in a rest length basket, transport or waste basket. The steel profiles are processed in the process, while the profile bar is precisely positioned by a transport gripper with linear motor and rotary encoders. The saw cut is made from the top, Microdosier-cooling-lubrication system ensures optimum cooling of the blade. The profile is, profile cross section regardless, pneumatically. Free-standing system with PC control or in combination with an automatic cutting machine, plastic-BAZ or SBZ. In a combination of stroke with the automatic cutting machine, BAZ or SBZ is synchronized. Profile lists for the store in the template magazine displays the employee on the TFT screen. Dwsdpfscmqkmox Addef The finished steel profiles are taken from the belt conveyor, acknowledged and filed in car, or manually pushed to the Stahlein-schubstation in the PVC profiles. New facility 10 weeks delivery time