max cutting width 250mm
max cutting height 100mm
Qnbin7bx
infeed table length 2m
outfeed table lenght 2,5m
9 pneumatic clamps
rolls in the table with feeding
outfeed conveyor
5
Bottene crosscut saw
Saw blade size 600mm
Cbce8tkuvv
Cutting height 230mm
Cutting width 500mm
Feed of cutting unit pneumatic
Engine with power 7.3kw
Coming soon to stock
15
Warm welcome,
In today's auction I have to offer you a crosscut saw from the excellent Italian company BOTTENE model R550
Below is some useful information about the saw:
* blade diameter max 550 mm
* saw motor 4.0 kW
* max cutting width 40 cm
* max cutting height 10 cm
* automatic feeding table length 300 cm
* roller receiving table length 400 cm
* outlet for sawdust extraction fi 80 cm
* pneumatic pressure of the element and blade movement.
* two pawls for cutting to the desired length, cont...
4
New machine
Year of manufacture 2022
Motor 400 V / 5.0 kW
speed 2800 rpm
cutting length 420 mm
Cutting width 420 mm at 90
295 mm at 45°
Cutting height 200 mm at 90°
140 mm at 45
Bypnuudq
Saw can be tilted on one side up to approx. 25° to acute angles and tilted flat to the left up to 30°.
Saw blade-Ø 520 mm x 50 mm
suction nozzle-Ø 100 mm
Weight 250kg
With the following equipment options:
- HM circular saw blade 520x4,0/2,8 x 50 60 WZ for wood
- Machine can be tilted on both sides from the fr...
1
Fezer crosscut saw
250 mm saw blade
Ddoyusn
45° tiltable
8
Max. saw blade diameter: 520 mm Cutting height: 200 mm at 90°, 140 mm at 45° Cutting length: 420 mm Miter range horizontal: 45°-90°-25° Miter range vertical: 60°-90°-30° Pneumatic material clamps Minimum quantity spray device laser
Qnkpv
max cutting width 330mm
max cutting height 95mm
blade diameter 450mm
B8lo7mxljr
pneumatic blade movement
pneumatic material pressure
tables with rolls
manual fences
motor 4kW
4
Cross-cut and miter saw, pull saw, chop saw
-Motor power: 1.03 KW
-Speed: 2800 rpm
-Saw blade max.: 280 mm
-Cutting height max.: 70 mm
-Cutting length: 250 mm
Qkrqrb0id
11
Crosscut saw
Jafiya7bo
Sheng Feng SC 18 LYear of construction 19903x220V  (Can be delivered with transformer for 3x380V extra cost &euro 250,- ex)Working width 300mmMax working height 110mmSaw blade 450mm
Including 2 roller conveyors 2050x300mm
4
New machine
Year of manufacture 2022
Circular crosscut and miter saw
Machine for cutting to length as well as for horizontal and vertical
miter cuts
double miters are possible
the drive with saw blade runs in a guide arm with 4 ball bushes
which can be swiveled up to 45° on both sides for miter cuts.
swivelling
for sharp miters the saw blade can be swivelled to the right under 45° up to
approx. 25° to the right
in addition, the saw head can be tilted to the left on one side from 90° to 45...
4
Omga crosscut saw T55 - 300
220 Volt - 3000 rpm
45° swiveling
B037mx8e
Year of manufacture 1977
6
Sell Production Line for making roof trusses and frame houses.
Avola 2007r type range 75V has automatic control from panel or computer. Very extensive cutting angles in 3 planes. Longitudinal cutting of beams cutting height up to 40 cm
Cdb2zijag2
The reason for the sale is the replacement for a newer one. Feel free to contact 667-266-094
blade diameter 600mm
Dvkpkkj
pneumatic arm movement
pneumatic clamp
pedal control
motor power 7,5kW
regulation of cutting angle
cutting height 210mm
cutting length 460mm
year 2010
4
Saw length 2meter incl. 2 chains ,oil pump for lubrication
Cdbvgiirax
3
Support plate is renewed
used, good condition
Make Graule
Type ZS 85 NS
Year of construction 1998
Machine no. 1998332
GS tested
CE type tested
Motor 2.0 kW / 380 V / 16 A
brake motor
Cutting height approx. 85 mm
Cutting length approx. 380 mm 90°, 265 mm 45°
Blade diameter approx. 300 mm
Saw blade bore approx. 30 mm / 40 mm
swiveling to the right up to 45°
swiveling left up to 45°
tiltable up to 45°
machine base
New price approx. €3,800.00
Extraction connection D 80 mm
T0jcujcj
Space requirement ...
Brand: Stromab
Model: PS 50/O
Serial no: 230481
Year of manufacture: 2003
Tec. info:
Maximum blade diameter: 500 mm
Cutting height: 145 mm
Blade rotation angles: +60° / 0° / -45°
Ccqovzzd7q
Cross-cut capacity with blade at 0°: 510 mm
Cross-cut capacity with blade at 45°: 350 mm
Motor: 5,5 kW, 7,5 hp, 2800 RPM, 50 Hz, 3-phase
Net weight: 500 kg
Max. distance between the blades cc 3060mm
Min distance between the blades cc 800mm
In feed roller table length 1700mm
Out feed roller table length 1700...
5
Mecall double crosscut saw
For aluminum and PVC profiles
Year of manufacture 2008
Vertical and horizontal material clamping
Aggregates working horizontally
Hydropneumatic feed
Electr. length positioning of the right saw unit
From outside 22,5° to 135° inside
Automatic overlength and short length
Automatic profile height measuring device
Ccuqhj3vig
400 Volt, 5,5 kw,
cutting length 310 - 4000 mm
Saw blade 500 Ø mm
dimensions 5950 x 1540 x 1690 mm
weight approx. 1560 kg
Machine is still in daily us...
2
- Engine power: 7,5kW
- Saw blade: 500mm
Qwxhealh
- Bore: 30mm
- Weight: 420kg
max cutting length 700mm
Ccyqpc2s8q
max cutting heigth 130mm
mechanical feeder - chain feeding
pneumatic pressure of material
motor 7,5HP
side tables
mobile construction
10
The manufacturer Reinhardt has sent us the operating manual of the high performance crosscut saw NC 810 H with three-arm destacker machine number; 99.08, as it is an almost identical machine. This can be made available.
Machine data:
Cdcry3rdeu
Dimensions: Depth x width x height: 1600 x 1300 x 1600 mm
11 kW sawing motor
Weight of the machine approx. 2000 KG
5
400 Volt Drehstrom-Bremsmotor 5,0 kW
Sägeblattdurchmesser 520 mm,
Sägeblattaufnahme 50 mm,
Schnitthöhe 200 mm
Sägeblatt auf 45° geneigt: Schnitthöhe 140 mm,
Schnittlänge 420 mm,
mit Maschinenständer und Handkurbel hinten
Cbslv37akh
zur Neigungseinstellung
2
Under table cross cut saw with approx. 4 m roller table on the left and driven 4 strand cross conveyor
Cdbvpglzzv
max. cutting width 800 mm ( but then only up to 100 mm thickness )
max. cutting height 200 mm with max. cutting width 600 mm
15
I sell the double mitre saw OMGA TRF 527, year 2005.
Cutting length 390 - 2800mm
Cutting width max. 170mm
Cutting height max. 90mm
Tilting heads 0 + - 45°
Cgtulztsc
2 Horizontal + 2 Vertical pneumatic Material pressures
2 Motors x 1,62kW (2,2 HP)
Good condition.
Available immediately.
7
Optimization crosscut saw with measuring station
input length 6,2 m
Gn3ap9zz
with sorting belt approx. 25 m with 10 discharge stations
machine was in use until 2015, since then in storage
6
Mitre circular saw, crosscut saw for aluminium FEZER type KG 30
year of manufacture approx. 2000
S8xzxh
saw blade diameter 300 mm
sawing range at 90° round Ø 100 mm
rectangle 120 x 90 mm
Sawing range at 45° round Ø 100 mm
rectangle 100 x 90 mm
Saw blade speed approx. 3000 rpm.
Table size 600 x 170 mm
Motor power 1,1 kW
Mains connection 400 Volt, 50 Hz
- Mitre cut +/- 45° by swivelling the saw
- Locking position for mitre cut at 15°, 22°, 30° and 45°
- Saw blade 300 x 3,3/2,3 x 30 mm
- Hand lever...
5
Crosscut and miter saw, pull saw, miter saw, panel saw, miter saw, radial saw, radial arm saw
-on: stable base
-Motor power: 1.49 kW
-Speed: 3000 rpm
-Saw blade: Ø 250 mm
-Max. Cutting height: 80 mm
-Cutting length: 500 mm
-Saw blade is: tiltable up to 90°
N0p8z
-Dimensions: 840/700/H1390 mm
-Weight: 150 kg
8
Crosscut saw
Velox Imet 350
45 degrees
Jieu3yr
saw blade 350mm
3
- Type ZS 200 N
Saw blade diameter 520 mm,
saw blade mounting hole 50 mm
saw blade speed 2.800 rpm
400 Volt / 5 kW (S6/40%) Motor with brake and automat.
Star delta motor control
C0pbce2c
cutting width at 90°: 420 mm
cutting width at 45° swivelled: 295 mm
cutting height at 90°: 200 mm
cutting height at 45° tilted: 140 mm
Saw can be tilted on one side up to approx. 25° to acute angles
and tilted flat to the left up to 30°.
Machine weight approx. 250 kg
-stable cast iron construction
-precise bal...
6
Mobile chop station with extremely robust base, ready assembled and ready for use.
Included special equipment:
- Machine tiltable on both sides from the front
- Circular saw blade HM 520x50 Z60 W neg.
- Undercarriage mobile, especially stable
Data of the machine:
- especially due to constant zero point
good when using measuring equipment
and stop systems (miter and tilt!)
- Powerful three-phase motor 5 kW with automatic
Star-delta starting
- stable guide arm with 4 ball bushings
for preci...
5
You are welcome to visit the facility with us. We are happy to help with the loading. Since it is a brewing plant, we sell it as a spare parts donor under exclusion of any warranty.
D3dmcpbn
6
Double trimming saw / sizing saw Rüco 20 for cutting to length, trimming and shortening of wood or panels.
Cbpmef7fzt
- motors: 2 x 4,4 kW
- cutting width max. approx.: 2.600 mm
- cutting depth max. approx.: 2.200 mm
- Cutting height max. approx. 100 mm
- Further technical data: See PDF.
1
Industrial Duty upstroke crosscut saw, for cutting aluminium sections, With oilpneumatic upstroke movement and horizontal and vertical pneumatic clamps. The machine is fitted with a 400mm TCT saw blade, with manual angle setting + / - 20 °. The cutting area is completely enclosed. There are various optional extras available such as roller tables with length stop.
Oilpneumatic upstroke of saw blade
400mm TCT saw blade
2.5 hp saw motor
Spray mist blade lubrication system
2 x vertical clamps
2 x ...
1
Saw blade feed penumatic
motor power 7,5 KW
crosscut max. 280 x 135 mm,
Cbfmq7o2fg
or 360 x 55 mm
complete with:
* 1 mtr. working table each left and right of the saw blade
* beveled plate behind saw cut for removal of
trim cuts
* 2-hand operating device
* front saw blade guard
* carbide saw blade
Optionally available:
* Front guard pneumatic
* Upper guard cutting area
* additional roller table per mtr (with roller 60 mm)
* manual stop 60 mm
* manual stop 250 mm
* pneumatic stop 60 mm
* pneuma...
3
1 new Holtec package crosscut saw KAPPSTAR HF122
robust all-rounder for sawn timber and logs -also for plastic-.
for end- / end- and cross-cuts
package cross sections up to 1,25 m x 1,25 m
Cbcevvhl3x
log diameter up to 1,60 m
Electric motor 11 KW
STIHL pointed tooth chain for crosscutting of sawn timber
Guide bar stellited on both sides (can be turned four times)
Blade length: 1,90 m
400V, 50 Hz
1 year warranty
7
- Clarity during the cutting process due to the
arranged saw blade
- Extremely large cutting area with compact and
stable construction
- Powerful three-phase motor with automatic
Star-delta starting circuit
- Fast miter adjustment
Yu3bik
- Self dismantling desired
6
max 6 m input length
Cutting height approx. 80 mm
Cas7pytpoa
But could still be mounted a larger saw blade.
Hydraulic under-table crosscut saw Esterer HKS for sawing, cutting to length and crosscutting of boards and beams including roller table.
- Cutting width max ca.: 700 mm
- cutting height max approx.: 130 mm
- roller table length: 3.000 mm
Cbdr0plwuh
- Max. Wood length approx. 4.000 - 5.000 mm (Extendable)
1
A German built and designed crosscut saw with a facility for the easy cutting of angled or straight components. A unique feature of the machine is that when angle cutting is required the saw unit pivots about a central point thus always maintaining the same cutting length. Although compact in design the machine gives large cutting capacity.
Precision ball bearing movement on hardened steel runners.
Sturdy cast iron construction with steel base stand.
Spring return of sawcarriage.
350mm max. saw...
11
max cutting capacity with sawblade D 600
610 x 30 mm
540 x 100 mm
420 x 160 mm
B9hrid9zx2
7,5 kw
3
new mobile package crosscut saw Holtec Piccolo
Bzxnier
ideal for end trimming and crosscutting of lumber packages
chain set with STIHL chain type Rapid Super 0.404" for extremely fine surfaces and
stellited guide bars on both sides (four-way reversible)
electric motor 7,5 kW
high cutting capacity
for bundles up to 1,15 m x 1,15 m and
log diameter up to 1,30 m
blade length: 1,60 m
400V, 50 Hz
1 year warranty
immediately available from stock
14