Used Haco Erm for sale (90)

Condition: new, Year of construction: 2026, 150 t 3100 mm Guodpfswyd Thex Ah Dsk 2600 mm 400 mm 200 mm 600 mm

Condition: excellent (used), functionality: fully functional, Year of construction: 1989, Haco hydraulic guillotine shear type TS 406 working width 4050 mm maximum sheet thickness 6 mm motorised back gauge cutting gap adjustment cutting angle adjustment Guedsxwmv Dopfx Ah Dsk

Condition: good (used), Year of construction: 2001, Used HACO guillotine shear Model HSLX 4006 Guedpoxwkcnjfx Ah Dok Capacity: 4050 x 6 mm Electrically adjustable back gauge, cutting angle, and blade gap

Condition: used, Year of construction: 1983, pressure 180 t chamfer lenght 3050 mm distance between columns 2550 mm throat 250 mm stroke 150 mm return speed 65 mm/sec ajustment speed 50 mm/sec Gsdpfewa Dyzox Ah Dsuk work height max. 1010 mm oil volume 150 l total power requirement 11 kW weight of the machine ca. 9500 kg dimensions 3100 x 1750 x 2850 mm Equipment: - Controlled axes: Y1, Y2, X - Electric rear stop, adjustable from the front * Fine adjustment via hand crank* - 2 front support arms - Upper tool - Lower tool = die block - Rear + side safety device - Foot control

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1990, Hydraulic Guilotine shear HACO TS 3012 - 1990 - Max. working width: 3050mm - Max. sheet thickness: 12mm - Back gauge motorised: 1000mm Gsdexvyx Nepfx Ah Douk - Control: Conventional - Transport dimensions: 3950mm x 1950mm x 2250mm (l x w x h) - Transport weight [kg]: 8000kg

Condition: excellent (used), functionality: fully functional, Year of construction: 2014, control type: NC control, actuation type: hydraulic, sheet thickness (max.): 6 mm, back gauge adjustment: motor-driven, back gauge travel distance Z-axis: 600 mm, pressure (max.): 310 bar, hydraulic flow rate: 25 l/min, Cutting length: 3200 mm Gsdpfxexz Aa Hs Ah Deuk Cutting thickness at 45 kg/mm²: 6 mm Cutting thickness at 60 kg/mm²: 4 mm Blade gap adjustment: included Backgauge travel: 600 mm Year: 2014

Condition: used, functionality: fully functional, Year of construction: 2004, Shear: HACO TS 3006 Working length: 3050 mm Capacity regular steel: 6 mm (400 N/mm²) Back gauge length: 750 mm (motorized) Controller: SP 8 Blade clearance: manual Condition of blades: good Minimum cutting angle: 0.5° Maximum cutting angle: 3° Number of hold-downs: 13 Length and number of sheet supports: 8 × 500 mm, 1 × 1000 mm (left stop + measuring bar) Equipped with sheet support device: No Strokes per minute at smallest angle: 10-15 Strokes per minute at largest angle: 6 Gedpoxy Illofx Ah Douk Working height: 770 mm Motor power: 7.5 KW Total length: approx. 3880 mm Total height: approx. 1700 mm Total width: 1650 mm Weight: approx. 4500 kg Year of manufacture: 2004 Delivery and installation at your location are of course possible; delivery charges and any additional costs in consultation. Since 2019, we have been the Dutch dealer for HACO press brakes and shears. In addition to selling sheet metalworking machines, we offer a complete package for service, maintenance and repairs.

Condition: excellent (used), functionality: fully functional, Year of construction: 1989, Haco hydraulic press brake type PPES 40.135 working width 4100 mm Gusdpexwmutefx Ah Dsk max press force 135 tons Haco CNC controller type M9101 CNC-controlled Y1, Y2, and X axes crowning with manual adjustment including set of tools

Condition: used, 🔧 Technical Specifications Year of Manufacture: 1989 Pressing Force: 60 tons Maximum Bending Length: 3100 mm Stroke Length: 100 mm Distance Between Uprights: approx. 2600 mm Throat Depth: 200 mm Maximum Opening Between Table and Upper Tool: 280 mm Working Speeds: Gujdpfx Aextn H Neh Dek Approach: 80 mm/s Working Stroke: 11 mm/s Return: 70 mm/s Backgauge: CNC controlled Control Unit: CNC (Robosoft Synchro+ / original control – to be confirmed with the seller) Machine Dimensions (L × W × H): approx. 3.28 m × 1.20 m × 2.24 m Weight: approx. 4,500 kg Power Supply: 380 V Tooling is included.

Condition: used, Year of construction: 1983, sheet width 3050 mm plate thickness 6,0 mm distance between columns 3000 mm cutting angle 0,5 - 3 ° no. of strokes 9 / 14 Hub/min down holder 18 Gujdpfevxlpiox Ah Dok total power requirement 10 kW weight of the machine ca. 4800 kg dimensions of the machine ca. 3750 x 1600 x 1650 mm Features: - Hydraulic / slide-guided sheet metal guillotine shears - Electric backgauge 10-750 mm - Electric cutting angle adjustment - Manual cutting gap adjustment - 1x side stop - Front finger guard - Foot switch

Condition: new, Year of construction: 2026, 3050 mm 12,0 mm 0,5-3,0 ° 1000 mm table height 930 mm Gsdsxpi Dhopfx Ah Douk work height max. 930 mm

Condition: ready for operation (used), power: 2 kW (2.72 HP), empty load weight: 550 kg, total length: 800 mm, total height: 1,200 mm, Haco 220 x 4 mm (fixed) Capacity: 220 x 4 mm Gjdpfx Asxpghweh Deuk Strokes/min: 35 Fixed angle -- variable angle: fixed: 90° Driven: hydraulic Workspace: 650 x 650 mm Work height: 890 mm Depht: 660 mm

Condition: like new (used), functionality: fully functional, Year of construction: 2025, control type: CNC control, controller manufacturer: ROBOSOFT, bending force (max.): 135 t, distance between stands: 2,600 mm, HACO ATLANTIC ERM 30135 AVAILABLE FROM MARCH 2026 Press Brake Specifications: Working length: 3100 mm Capacity: 135 tonnes Distance between side frames: 2600 mm Throat depth: 250 mm Daylight opening: 400 mm Stroke: 200 mm Table height: 915 mm Motor power: 15 kW Total length: 3500 mm Total depth: 1700 mm Total height: 2500 mm Gjdpfxexvd T Ro Ah Djuk Weight: 7800 kg Year of construction: 2025 Furthermore, the machine is equipped with: - Easybend 2D CNC touch control - 4-axis backgauge (X-R-Z1-Z2 axis) - CE SLOW version (side doors, rear light curtain, and special covers with sensors) - CNC-controlled crowning - Equipped with DSP lasersafe finger detection (for use during rapid approach) - Quick manual clamping for European standard tooling, height 150 mm

Condition: excellent (used), Year of construction: 1997, Pressure capacity 40 t Folding length 2100 mm Clearance between the uprights 1600 mm Projection 220 mm Installation height approx. 300 mm Stroke length approx. 100 mm Working height 880 mm Table width 135 mm Stroke rate approx. 9 / min Table width approx. 240 mm Emptying speed approx. 70 mm / s Working speed approx. 13 mm / s Retraction speed approx. 100 mm / s Drive power 5.5 kW Dimensions L x W x H 2400 x 1400 x 2100 mm Weight 3750 kg Accessories / Special features: - As good as new deer foot upper tool, continuous, can be sawn to any length yourself - As good as new universal die with various openings, 70 x 70 x 2100 mm - Motorized plunge depth adjustment with digital display - Manual backgauge approx. 600 mm with SIKO counter - Fast rapid feed and fast retraction - 2-hand operation, combined with foot switch + EMERGENCY STOP - 2 backgauge fingers - Pressure regulation via potentiometer on the control panel - Control panel, swivel-mounted - CE marking Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel Gsdpju Agk Hofx Ah Douk

Condition: used, functionality: fully functional, Year of construction: 2000, overall weight: 4,500 kg, Hydraulic vertical cutting shear Brand: HACO Model: TS 306 Sold by: Casanova Three-phase 380V Year: 2000 Type: Vertical cutting (blade inclination) Cutting length: 3050 mm Capacity: 6 mm Cutting angle adjustment: 0.5-3 degrees Number of hold-downs: 13 Strokes per minute: 8-14 Squaring arm: 1000 mm Back gauge: 750 mm Motorized back gauge with handwheel for fine adjustment Motor: 7.5 kW Guedpfsxgdlnjx Ah Dek Weight: 4500 kg

Condition: good (used), Year of construction: 2009, sheet width 3050 mm plate thickness 6.0 mm cutting angle adjustment 0.5 - 3.0 ° down holder 18 Stück no. of strokes 8 - 14 Hub/min Guedpfx Ahsxmakge Dek back stop - adjustable 750 mm work height max. 770 mm Control SP 8 total power requirement 7.5 kW weight of the machine ca. 4800 kg. range L-W-H 3650 x 2100 x 1750 mm very little use (!!) from a maintenance workshop Features - Guide-railed electro-hydraulic guillotine shear - HACO control model NC SP 8 * Easy operation directly at the cutting table * Adjustment of cutting angle + backgauge * Retraction function from rear stop * Electric cutting length limitation * Emergency stop button, locking - Motor-adjustable and programmable rear stop - Electric/hydraulic cutting angle adjustment - Manual cutting gap adjustment, from the front - 1x side stop - 1,000 mm, with scale & T-slot - Front finger guard - 1x freely movable foot switch - Rear safety guard + sheet metal chute - Operating instructions (PDF)

Condition: new, Year of construction: 2025, 150 t 3100 mm 2600 mm 400 mm 270 mm 800 mm Gsdpfx Ajxmalkoh Djuk

Condition: used, functionality: fully functional, Year of construction: 1979, working width: 2,500 mm, sheet thickness steel (max.): 13 mm, back gauge adjustment: motor-driven, overall weight: 9,600 kg, Capacity: 2500 x 13 mm. Backgauge: Motorized. Adjustable blade angle: Yes. Adjustable cutting length: Yes. Adjustable blade gap: Yes. Year: 1979 Country of origin: Belgium. Size (L x W x H): 3700 x 2800 x 1900 mm. Weight: 9600 kg. With squaring arm and 3 support arms. Gusdpjxpgz Refx Ah Dsk All our machines will be tested and serviced before delivery.

Condition: excellent (used), functionality: fully functional, Year of construction: 1996, working width: 6,000 mm, sheet thickness aluminum (max.): 4 mm, sheet thickness steel (max.): 3 mm, Equipment: documentation/manual, The face design of the segmental machine structure and the swing-mounted bending beam on the kinematic mechanism enable the bending of various complex shapes from steel and aluminum sheet with a maximum bending angle of 145 degrees and a maximum upper beam stroke of 200 mm. The machine is controlled by a three-axis programmable controller, allowing operation in three modes: Gjdpfxoxflfmj Ah Dsuk Manual, single – includes one program consisting of a single bending stage and one backgauge setting, which can be repeated any number of times. The program comprises 60 programmable blocks, each containing 10 bends and backgauge positions. The machine can bend steel sheet up to 3 mm thick and aluminum up to 4 mm. The hydraulic oil has been replaced and the entire control system has been renewed.

Condition: like new (used), functionality: fully functional, Year of construction: 2019, HACO TS 2006 in very good condition Working length: 2050 mm Capacity (mild steel): 6 mm (400 N/MM²) Backgauge length: 750 mm Control: SP-9 motorized backgauge with digital readout Blade clearance: manual Condition of blades: good Minimum cutting angle: 0.5° Maximum cutting angle: 3° Number of hold-downs: 18 Length and number of sheet supports: 5 x 500 mm, 1 x 1500 mm, side stop 1500 mm with ball rollers included Equipped with support system: No Working height: 770 mm Motor power: 7.5 KW Total length: approx. 2800 mm Total height: approx. 1660 mm Guedpoxpm Iqsfx Ah Djk Total width: 1905 mm Weight: approx. 3500 kg Year of manufacture: 2019 Delivery and installation at your location is possible, with delivery and additional costs to be discussed. Since 2019, we have been the official Dutch dealer for HACO press brakes and guillotine shears. In addition to sheet metal machinery sales, we offer a complete package of services for maintenance and repairs.

Condition: new, Year of construction: 2026, control type: CNC control, overall weight: 4,500 kg, HACO hydraulic guillotine shear, GSX model Brand new machine This series offers several models for sheet metal working, from 2 to 4 m in length and 6 to 13 mm in thickness. Equipped with SC200 touchscreen CNC control Ball transfers on the sheet support table Options: Sheet holding system Sheet return system to the front Retractable rear stop Finger protection via light barrier Guedpfx Asxay U Eoh Dok Sheet clamps with plastic tips Full table with ball transfers

Condition: excellent (used), Year of construction: 1994, Hydraulic guillotine shear Fab. HACO Typ. HSLX 3000x6/8mm Year 1994 Technical data Make: HACO Type: HSLX 3006 / 8 Year of manufacture: 1994 sheet width: 3050 mm Godpfslp Nrbjx Ah Dsuk sheet thickness: 6 mm / 8 mm on 1000 mm sheet length cutting angle: 0.5 - 3 number of strokes: 9/17 drive motor: 11 kW number of hold-downs: 18 pcs. space requirement: approx. 3,7 x 1,7 /additional lay-on arms) x 1,6 mm Machine weight: approx. 6 t Equipment - autom. cutting angle adjustment - Automatic cutting gap adjustment - Cutting line illumination - Support arms - Knife with 4 cutting edges - Cutting length limitation - CNC backgauge 705mm adjustment range 705 mm - angular stop - Instruction manual All data without guarantee. A demonstration under power is possible at any time in our exhibition hall.

Condition: new, Year of construction: 2024, table length 3048 mm table width 1524 mm burner heads 1 stroke 270 mm speed 100 m/min dimensions 8900 x 2260 x 2220 mm Gedpswp Thyefx Ah Deuk weight of the machine ca. 7.500 kg

Condition: new, Year of construction: 2026, control type: CNC control, controller model: Easybend 2D, working width: 3,100 mm, bending force (max.): 150 t, distance between stands: 2,600 mm, New machine Haco press brake type OPTIFORM 3m x 150T Gjdpfxsxan Imj Ah Douk Easybend CNC controller Rear motorized back gauge axis XR Manual table for standard European-type tooling Manual fast clamping system for punches, European System type DSP light barrier Option: 2 swiveling front support arms Version OPF 30150 + : with XRZ1Z2 backgauge - CNC crowning

Condition: new, Year of construction: 2025, 3050 mm Godpfxewp Tduj Ah Dsuk 13,0 mm 0,5-2,5 ° 1000 mm work height max. 900 mm