Used Hamburger for sale (329)

Condition: used, functionality: fully functional, Year of construction: 2013, operating hours: 22,460 h, load capacity: 5,000 kg, lifting height: 3,760 mm, fuel type: diesel, mast type: simplex, construction height: 2,800 mm, empty load weight: 7,250 kg, total length: 3,050 mm, drive type: Diesel, construction width: 1,450 mm, Diesel forklift Load center: 600 Mast type: Standard Condition: Ready for operation and fully functional Ksdpfx Afozzgcrj Hjdt Technical condition: very good Front tire type: Superelastic Front tire size: 3.00-15 Rear tire type: Superelastic Rear tire size: 2.50-15 Description: In addition to this Linde model, we have approximately 200 heavy-duty forklifts, compact forklifts, and reach trucks in our warehouses in Hamburg and Gdansk. Visit our website - sago-online. Lease-to-own and financing options at favorable terms are always possible for us. We would also be happy to buy your used forklift, even if you do not purchase a vehicle from us. Our owner, Mr. Peter Sawitzki, will be happy to provide you with detailed advice on this H50D-02/600. P.S.: Our forklift workshop specializes in the repair, maintenance, overhaul, and custom modification of forklifts from 8 tons upwards. We will also gladly display your vehicle in our showroom for consignment sales. Side shift, Heater, Full cabin.

Condition: used, functionality: fully functional, Year of construction: 2007, load capacity: 6,000 kg, lifting height: 3,500 mm, fuel type: electric, mast type: simplex, construction height: 2,600 mm, fork carriage width: 2,000 mm, fork length: 1,380 mm, empty load weight: 10,273 kg, total length: 3,730 mm, drive type: Elektro, construction width: 2,000 mm, Electric 4-wheel forklift Load center: 600 Fork width: 220 mm Fork thickness: 70 mm Mast type: Standard Condition: Ready for use and fully functional Technical condition: normal Front tire type: Superelastic Front tire size: 8.25-15 Rear tire type: Superelastic Rear tire size: 8.25-15 Battery voltage: 80V Battery Ah: 1240Ah Battery year of manufacture: 2017 Kjdpfxezq H Utj Af Hjdt Description: In addition to this Kalmar model, we have approximately 200 heavy-duty forklifts, compact forklifts, and side loaders in our Hamburg and Gdansk warehouses. Visit our website – sago-online. Lease-purchase and financing options are available from us at favorable terms. We are also happy to buy your used forklifts outright, even if you do not purchase a vehicle from us. Our owner, Mr. Peter Sawitzki, will be pleased to provide you with detailed advice on this ECE60-6. P.S.: Our forklift workshop specializes in repair, maintenance, overhaul, and custom builds for forklifts from 8 tons upwards. We will also gladly display your vehicle for consignment sale. Side shift, fork positioner Fork positioner opening range: 470/1980 mm; Telescopic forks: 1380 / 2400 mm Heater, full cabin

Condition: used, mileage: 1,99,111 km, power: 105 kW (142.76 HP), first registration: 08/2020, fuel type: diesel, overall weight: 3,500 kg, next inspection (TÜV): 09/2026, color: white, gearing type: automatic, emission class: euro6, number of seats: 2, Year of construction: 2020, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, parking heater, soot filter, Vehicle number (for enquiries): 91 Mercedes-Benz Sprinter 314 CDI Single owner. Full service history. Paint code: * 9147 Paint color Arctic White MB 9147 Interior trim: * VF7 Maturin fabric, black Equipment: * 219L Hamburg * 9147 Paint color Arctic White MB 9147 * BH1 Hill hold function * BH4 Control code hydro aggregate variant 3 * BK2 Control code wheel brake configuration 2 * C6L Multifunction steering wheel * C910 - * CB7 Stabilization level I * CL1 Steering wheel adjustable in tilt and height * D22 Fixed window in rear roof * D50 Full partition wall * E07 Hill start assist * E1D Digital radio (DAB) * E2I Additional battery for retrofit consumers, interior area * E36 Additional relay for extra battery * E3M MBUX multimedia system with 7-inch touchscreen * ED4 AGM battery 12V 92Ah * ES0 Jump-start contact * ES5 Charging package for instrument panel * EW6 Pre-installation for Remote Services Plus * EY5 Mercedes-Benz emergency call system * EY6 Breakdown management * F1K Coat hook in cab * F64 Exterior mirrors electrically folding * F68 Exterior mirrors heated and electrically adjustable * F910 - * FF5 Overhead storage shelf above windscreen * FG8 Front cupholders * FJ1 Folding lid for storage compartment * FJ4 Storage compartment under dashboard * FKA Panel van * FM3 Wet wiper system * FR8 Reversing camera * FY1 Anti-theft package * FY7 Multi-button remote control * Additional main key * GK8 9G-TRONIC * H12 Additional hot-water heater * H13 Additional rear heat exchanger * H16 Driver’s seat heating * H21 Thermal insulation glazing all round with filter strip on windscreen * HH9 Semi-automatic TEMPMATIC air conditioning * HI1 Climate zone 1 (cold/comfort) * IC1 Model series C907/C910 Sprinter * IF0 Model series C910 VS30 FWD * IG4 Standard * IG5 Basic * IH6 Head unit ECE/ROW * IK0 Complete vehicle * IL1 Domestic (Germany) Kdedpfx Asx Dp Tref Hot * IL5 Left-hand drive * IS2 Wheelbase 3,259 mm (code forming BM) * IT4 3.5 tonner * J10 Speedometer km/h * J58 Seat belt warning for driver’s seat * J65 Outside temperature display * JA7 Blind spot assist * JA8 Crosswind assist * JF1 Rain sensor * JH3 Communication module (LTE) for digital services * JI6 Start running distance service interval 40,000 km * K12 Main tank 65 liters * K1D Exhaust generation WLTP * KP6 SCR emission control generation 3 * L Left-hand drive * L22 Rear lights with partial LED technology * L65 Ceiling light in load/passenger compartment with door contact * L94 Omission of parking light * LA2 Light assistant * LB5 3rd brake light * LC4 Comfort roof control unit * LE1 Adaptive brake light * LG7 LED high performance headlights * LX5 Europe * MI2 Engine OM651 DE 22 LA 105 kW (143 hp) * MJ8 ECO start-stop function * ML7 Efficient Power Control (EPC) * MS1 Cruise control * MT2 Emissions standard Euro 6D-TEMP N1 * OH3 Inspection fresh-up 3 * P2R Basic package * P47 Front mud flaps * Q11 Longitudinal frame reinforcement * R65 Spare wheel carrier under rear frame * R87 Spare wheel * RF1 Tire brand Continental (10) * RM0 All-season tires * RN5 Tire size 225/65 R16 C * RS3 Steel wheels 6.5 J x 16 * RX5 Wheel brand Maxion Wheels * S04 Adjustable passenger seat * S22 Armrest for driver’s seat, ISO-fix (child seat mounting system) * S25 Armrest for passenger seat, center armrest

Condition: used, functionality: fully functional, Year of construction: 2004, operating hours: 6,597 h, load capacity: 5,000 kg, lifting height: 4,450 mm, free lift: 840 mm, fuel type: diesel, mast type: simplex, construction height: 3,250 mm, fork carriage width: 1,260 mm, fork length: 1,360 mm, empty load weight: 8,700 kg, total length: 4,600 mm, drive type: Diesel, construction width: 2,200 mm, Side Loader Load center: 700 Fork width: 160 mm Fork thickness: 65 mm Mast type: Standard Condition: Ready for use and fully functional Technical condition: very good Front tire type: Air Front tire size: 27x10-12 Rear tire type: Air Rear tire size: 27x10-12 Kdjdpfjzywdksx Af Hst Description: In addition to this Battioni Pagani model, we have approximately 200 heavy-duty forklifts, compact forklifts, and side loaders in our warehouses in Hamburg and Gdansk. Visit our website – sago-online. Lease-to-own and financing options are available at favorable terms. We are also happy to buy your used equipment, even if you do not purchase a vehicle from us. Our owner, Mr. Peter Sawitzki, will gladly provide you with detailed information about this HT5KU. P.S.: Our forklift workshop specializes in repair, refurbishment, overhaul, and custom construction for forklifts from 8 tons upwards. We will also gladly display your vehicle for consignment sale at our location. 1x NIVO fork; telescopic forks 1360 / 2360 mm Heater, full cabin, Platform height: 820 mm

Year of construction: 2007, condition: good (used), Sandwich vending machine Manufacturer: DTVendings Type: BGT Exclusive patented plate system that offers the most professional results, the crunchiest and most delicious sandwich or sandwich. Two stainless steel carousels of 60 units (sandwiches) and another of 40 (snacks). Four product selections (a single preselected unit). Independent roasting times. Kodsfny D Nepfx Af Hodt Ideal service time of between 60 and 90 seconds for sandwich, 90 and 120 seconds for snacks. Suitable products: sandwiches, folded pizzas, hamburgers, baguette bread sandwiches, ciabatta, even frankfurts. - Dimensions: 1850x995x960 mm - Weight: 375 Kg - Power: 220 V. 50 Hz - Power: 1.5 Kw - Capacity: 100 - Protocol: executive - Max consumption: 1.5 Kw - Average consumption: 0.9 Kw

Condition: used, functionality: fully functional, Year of construction: 2011, operating hours: 9,385 h, load capacity: 18,000 kg, lifting height: 3,540 mm, fuel type: diesel, mast type: simplex, construction height: 3,650 mm, fork carriage width: 1,600 mm, fork length: 1,600 mm, empty load weight: 29,590 kg, total length: 7,100 mm, drive type: Diesel, construction width: 2,650 mm, Side loader Load center: 800 Fork width: 200 mm Ksdozxu D Sopfx Af Hsdt Fork thickness: 100 mm Mast type: Standard Condition: Ready for use and fully functional Technical condition: very good Front tire type: Pneumatic Front tire size: 16.00-25 Rear tire type: Pneumatic Rear tire size: 16.00-25 Description: In addition to this Bulmor model, we have approximately 200 heavy-duty forklifts, compact forklifts, and side loaders in our warehouses in Hamburg and Gdansk. Visit our website - sago-online. Lease-purchase and financing options are available at favorable terms. We would also be happy to buy your used forklift outright, even if you do not purchase a vehicle from us. Our owner, Mr. Peter Sawitzki, will be happy to provide you with detailed advice on this DQ180/16/35. P.S.: Our forklift workshop specializes in repair, maintenance, overhaul, and custom modifications for forklifts from 8 tons upwards. We would also be happy to offer your vehicle for consignment sale at our location. Heater, full cabin, Platform height: 1,670 mm; front/rear camera; Webasto

Condition: used, Year of construction: 2007, machine/vehicle number: 4801250 / PH06 11 005, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, overall weight: 55,000 kg, year of last overhaul: 2024, clamping force: 3,000 kN, mold height (min.): 1,000 mm, plate length: 2,800 mm, plate width: 2,200 mm, Equipment: CE marking, documentation/manual, For sale is a KraussMaffei LFI shuttle mould carrier for polyurethane processing and backfoaming of large-format components. The system was designed for PU moulding and LFI applications and features a hydraulic clamping unit with a movable lower mould mounting platen. Technical data: Manufacturer: KraussMaffei Type: FT-R-H-25-20-3600.0°.65° Year of manufacture: 2007 KM order number: 39000233 Control system: Siemens S7 Clamping force: 3,000 kN Opening force: 800 kN Parallel stroke: 600 mm Mould mounting platens: 2,500 x 2,000 mm Minimum mould height: 1,000 mm Maximum mould height: 1,500 mm Maximum total mould weight: 10,000 kg Maximum upper mould weight: 5,000 kg Upper mould mounting platen pivotable up to 90° Machine weight: approx. 55,000 kg Operating voltage: 400 V Scope of supply: LFI shuttle mould carrier Hydraulic units Control unit Shuttle / traversing unit Production moulds and temperature control units are not included in the scope of supply. Extensive original KraussMaffei documentation is available, including operating manuals, technical drawings, electrical diagrams and spare parts documentation. The machine is fully functional. Inspection under power is possible by prior appointment. Kjdpfx Aez Dn Ixof Hsdt The machine is located in the Hamburg area, Northern Germany. The exact location will be provided to qualified prospective buyers. Dismantling, loading and transport are to be carried out by the buyer. Further technical documentation, drawings and photographs are available upon request. Subject to availability.

Condition: good (used), functionality: fully functional, For sale is a used universal wire stapling machine, Speckbötel type FEN. Kdjdpfxszymyne Af Hot This machine is particularly suitable for the production and assembly of wine crates, fruit crates, vegetable crates, and other wooden crates or wooden packaging. The staples are formed directly from the continuous wire feed from the reel within the machine. This makes the machine suitable for continuous operation in crate and packaging production. Technical data / features: Manufacturer: Speckbötel Type: FEN Manufacturing location: Hamburg Machine type: Universal wire stapling machine Design: Wire nailing machine / flat stapling machine Staple formation from continuous wire Processing of wire from a reel Large work table Height-adjustable work area Handwheel for adjustment Heavy-duty and robust industrial design Suitable for the production or assembly of: Wine crates Fruit crates Vegetable crates Packaging crates other wooden crates and wooden packaging The machine is in used condition. Features and condition as shown in the photos. Transportation is possible for an additional charge! The machine is currently still at the customer's location but would be available shortly! The machine will be inspected before sale. For used machines with a year of manufacture of 2009 or earlier, the warranty is excluded when sold to commercial customers. Technical data and features may vary. Errors, prior sales, and changes are subject to change. All information without guarantee.

Condition: used, functionality: fully functional, Year of construction: 2014, load capacity: 3,300 kg, fork length: 2,400 mm, empty load weight: 795 kg, Forks Load center: 600 Fork width: 200 mm Kodpeu Dzrhefx Af Hodt Fork thickness: 60 mm Condition: Ready for use and fully functional Technical condition: very good Description: In addition to this Luck model, we have approximately 200 heavy-duty forklifts, compact forklifts, and side loaders in our warehouses in Hamburg and Gdansk. Visit our website - sago-online. Lease-purchase and financing options at favorable terms are always possible. We would also be happy to buy your used vehicle outright, even if you do not purchase a vehicle from us. Our owner, Mr. Peter Sawitzki, will be happy to provide you with detailed advice on this LOAD STABILIZER. P.S.: Our forklift workshop specializes in the repair, maintenance, overhaul, and special construction of forklifts from 8 tons upwards. We would also be happy to offer your vehicle for consignment sale at our premises.

Condition: used, functionality: fully functional, Year of construction: 2007, load capacity: 18,000 kg, lifting height: 4,000 mm, free lift: 1,960 mm, fuel type: diesel, mast type: duplex, construction height: 3,860 mm, fork carriage width: 1,600 mm, fork length: 1,700 mm, empty load weight: 27,300 kg, total length: 6,050 mm, drive type: Diesel, construction width: 2,800 mm, Side loader Load center: 800 Fork width: 460 mm Fork thickness: 90 mm Mast type: Duplex Condition: Ready for use and fully functional Kjdpfjy U R Arex Af Hsdt Technical condition: good Front tire type: Pneumatic Front tire size: 14.00-24 Rear tire type: Pneumatic Rear tire size: 14.00-24 Description: In addition to this Baumann model, we have approximately 200 heavy-duty forklifts, compact forklifts, and side loaders in stock at our Hamburg and Gdansk warehouses. Visit our website - sago-online. Lease-to-own and financing options are available at favorable terms. We would also be happy to buy your used forklift, even if you do not purchase a vehicle from us. Our owner, Mr. Peter Sawitzki, will be happy to provide you with detailed advice on this GCS180/18-17/40SFH. P.S.: Our forklift workshop specializes in repair, maintenance, overhaul, and custom modifications for forklifts from 8 tons upwards. We are also happy to offer your vehicle for sale on consignment. Telescopic forks: 1700 / 2900 mm Heater, full cab, full free lift

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, Equipment: documentation/manual, type plate available, Taylor Hobson Talyrond 265 roundness measuring instrument. Extremely accurate; it can measure the roundness of lenses, optics, pistons, turbine components, tubes, shafts, and also eccentricity, e.g., of cams on a camshaft or journals of a crankshaft. It is certainly of interest for motorsport and tuning companies. The first photo is a "representative image" from a Taylor Hobson catalog, showing how it is constructed, except for the computer, which is a newer, more modern HP model with a small form factor. Max. diameter 350 mm Max. test piece height 500 mm (higher values are possible by measuring in two parts, up to a maximum of 1000 mm...) Self-centering of the workpiece +/- 5 mm Max. weight of test piece 40 kg The system has been used very little and has had only two owners. The first owner, from whom I bought it, was an implant company in Hamburg; it was used in a "medically clean environment" and is extremely clean. It was never located in a dirty machine hall. The year of manufacture is estimated to be between 2003 and 2005. The Taylor-Hobson measurement software is, of course, included and runs on the supplied HP computer (without a password...). It is also on the USB stick, perhaps for installation on another machine at your location. Accessories are included: the original Taylor-Hobson desk, computer, monitor, seven (7!) measuring probes, each of which is very expensive to purchase. A sample/sample lens (hemisphere) is included for calibration! The very detailed operating manual is on the USB stick, and all circuit diagrams and functional diagrams are also included! The system will be shipped on two Euro pallets via a freight carrier. It is already well secured on them. The Talyrond 265 and the desk will be wrapped with bubble wrap, etc., and secured with stretch film to provide extreme protection during transport. The system itself is fixed with "transport safety screws." Shipping is at the buyer's expense and will be on two Euro pallets. The measuring system should definitely be assembled and put into operation by a Taylor Hobson service technician, who can then also recalibrate the system on-site. This is now recommended after a few years. Errors can be made during assembly and commissioning. For example, some locking screws are installed for transport, and if you forget them, the system could be damaged when starting up. Ksdpszcqy Eofx Af Hedt A truly well-maintained, very accurate system that will continue to provide excellent service for many years to come!

Condition: used, Year of construction: 2002, functionality: fully functional, SPB HUSMANN 20 SEL (20 m3) as shown in the picture is for sale. Kdodsz Ayf Aopfx Af Hst 2 units in stock (€3,200 per unit). Inspection possible – location: Hamburg (Stellingen).

Condition: used, Year of construction: 2014, Roll forming line Trima K2 with compact proofing cabinet G2-3 Suitable for round, long-rolled, enveloped, and flattened products, e.g.: hamburger buns, hot dog buns, mini baguettes Dough divider and rounder K2 (year of manufacture 2014) Digital adjustment of weight, shaping chamber height, shaping speed, and shaping time Dough hopper capacity 25 kg with infeed belts Mehler for dough hopper, shaping chamber, and spreading belts Manual adjustment of pressing force for different types of dough Weight range: 25-95g / 50-150g With foot switch Touchscreen control with recipe memory Output: max. 3,200 pieces/h Proofing cabinet G2-3 (year of manufacture 2013) Proofing time approx. 3 min (depending on the upstream machine) Kjdpfx Asz A Ry Iof Hsdt Number of holders: 100 With motorized top belt including adjustable speed Manual removal of dough pieces

Condition: good (used), FKS PrintBind KB 2000 Book Binder This machine is 100% functional and ready to use. Manufactured by FKS Hamburg, Germany. Capable of binding books, brochures, pads, prescriptions, etc. A very handy machine, ideal for digital printing. The machine has a convenient base and a built-in compressor. Technical specifications: Maximum format: 320 x 310 mm Spine thickness: 60 mm Capacity: approx. 320 books/h Weight: 186 kg 230V power supply Material detection sensors Automatic cover detection and automatic cover clamp Spine milling Simple operation via LCD panel Adjustable cover clamping force Infinitely variable glue thickness adjustment Includes user manual and compressor. Kjdpezt H Npsfx Af Hedt

Condition: used, functionality: fully functional, Year of construction: 2004, operating hours: 19,015 h, load capacity: 12,000 kg, lifting height: 4,100 mm, fuel type: diesel, mast type: simplex, construction height: 3,660 mm, fork carriage width: 2,510 mm, fork length: 1,900 mm, empty load weight: 22,000 kg, total length: 5,200 mm, drive type: Diesel, construction width: 2,580 mm, Diesel forklift Load center: 1200 Fork width: 275 mm Kdodjy Sixgjpfx Af Hjt Fork thickness: 80 mm Mast type: Standard Condition: Ready for operation and fully functional Technical condition: very good Front tire type: Air Front tire size: 12.00-20 Rear tire type: Air Rear tire size: 12.00-20 Description: In addition to this Svetruck model, we have approximately 200 heavy-duty forklifts, compact forklifts, and side loaders in our Hamburg and Gdansk warehouses. Visit our website – sago-online. Lease-to-own and financing options are available from us at favorable terms. We are also happy to buy your used forklifts, even if you do not purchase a vehicle from us. Our owner, Mr. Peter Sawitzki, will gladly provide you with detailed advice on this 12120-35 model. P.S.: Our forklift workshop specializes in the repair, maintenance, overhaul, and custom fabrication of forklifts with a capacity of 8 tons and above. We would also be happy to offer your vehicle for sale on consignment. Side shifter, fork positioner Fork positioner opening range: 860 / 2420 mm Heater, full cabin

Condition: used, functionality: fully functional, Year of construction: 2026, operating hours: 2 h, load capacity: 5,000 kg, lifting height: 5,510 mm, free lift: 1,860 mm, fuel type: diesel, mast type: triplex, construction height: 2,900 mm, fork carriage width: 1,680 mm, fork length: 1,200 mm, empty load weight: 8,436 kg, total length: 3,800 mm, drive type: Diesel, construction width: 2,500 mm, Rough terrain forklift Load center: 600 Fork width: 150 mm Fork thickness: 60 mm Kodpfx Aszpzxqsf Hodt Mast type: Triplex Condition: Ready for use and fully functional Technical condition: New Front tire type: Pneumatic Front tire size: 480/65-22.5 Rear tire type: Pneumatic Rear tire size: 340/80 R18 Description: In addition to this Manitou model, we have approximately 200 heavy-duty forklifts, compact forklifts, and side loaders in our Hamburg and Gdansk warehouses. Visit our website - sago-online. Lease-to-own and financing options are always available at favorable terms. We are also happy to buy your used forklift outright, even if you do not purchase a vehicle from us. Our owner, Mr. Peter Sawitzki, will be happy to provide you with detailed information about this M50-4D. P.S.: Our forklift workshop specializes in repair, maintenance, overhaul, and custom fabrication for forklifts from 8 tons and up. We are also happy to offer consignment sales for your vehicle. Side shift, Heater, full cab, full free lift, CE certificate, 4x4

Condition: used, functionality: fully functional, Year of construction: 2016, operating hours: 18,542 h, load capacity: 10,000 kg, lifting height: 3,600 mm, fuel type: diesel, mast type: simplex, construction height: 3,470 mm, fork carriage width: 2,500 mm, fork length: 1,600 mm, empty load weight: 18,160 kg, total length: 5,000 mm, drive type: Diesel, construction width: 2,600 mm, Diesel forklift Load center: 1200 Fork width: 350 mm Fork thickness: 80 mm Mast type: Standard Condition: Ready for use and fully functional Technical condition: very good Front tire type: Pneumatic Front tire size: 11.00-20 Rear tire type: Pneumatic Kdjdpfey E Uv Dox Af Hot Rear tire size: 11.00-20 Description: In addition to this Kalmar model, we have approximately 200 heavy-duty forklifts, compact forklifts, and side loaders in our Hamburg and Gdansk warehouses. Visit our website - sago-online. Lease purchase and financing at favorable terms are always possible for us. We would also be happy to buy your used equipment outright, even if you do not purchase a vehicle from us. Our owner, Mr. Peter Sawitzki, will be happy to provide you with detailed advice on this DCG100-12. P.S.: Our forklift workshop specializes in repair, maintenance, overhaul, and custom modifications for forklifts from 8 tons upwards. We will also gladly display your vehicle for consignment sale. Side shift, fork positioner Fork positioner adjustment range: 705 / 2400 mm Heater, full cabin, air conditioning, Camera

Condition: reconditioned (used), The Risco RS4001 Vacuum Filler is a highly efficient and versatile machine designed for use in the food processing industry, particularly for filling and portioning sausages, hamburgers, meatballs, pâtés, and other similar products. Kdsdpsubvkwsfx Af Hjt The RS4001 features a powerful vacuum system that ensures consistent product filling with minimal air inclusion, which is essential for maintaining product quality, especially in sausages and similar products, it is also equipped with advanced portioning technology that allows for precise control over portion sizes. Technical informations: Hopper capacity: 260l Power: 6.3kW Portioning range: 5-10.000 grams Efficiency: up to 380 portions/min / 6.500 kg/h Dimensions: L: 1950 x W: 1200 x H: 1950mm Weight: 900kg Machine after complete renovation

Condition: good (used), functionality: fully functional, machine/vehicle number: E9-00274, For sale is a Daewoo G50SC-2 forklift with a gas-powered engine and side shifter. The forklift is in perfect working order. The last inspection was carried out in 2023. Technical data and equipment: • Manufacturer: Daewoo • Model: G50SC-2 • Engine: Gas / LPG • Rated load capacity: 5,000 kg • Load capacity with mounted attachment according to the nameplate: 4,550 kg at a 500 mm load center and 3,650 mm lifting height • Side shifter Kedpfoz Apf Ssx Af Hjdt • Operator protection roof with weather protection • Windshield with windshield wiper • Work lights • Mount for two gas cylinders The forklift is in used condition with typical signs of wear and tear. Suitable for material handling, warehousing, and loading/unloading operations. Inspection and demonstration are possible by arrangement. Location: Quickborn (25451) near Hamburg, close to the Quickborn highway exit. If you are interested or have any questions, please do not hesitate to contact me.

Condition: used, functionality: fully functional, Year of construction: 2013, operating hours: 806 h, load capacity: 3,500 kg, lifting height: 4,080 mm, fuel type: diesel, mast type: simplex, construction height: 2,700 mm, fork carriage width: 1,100 mm, fork length: 1,200 mm, empty load weight: 5,002 kg, total length: 2,800 mm, drive type: Diesel, construction width: 1,200 mm, Diesel forklift Load center: 500 Fork width: 120 mm Fork thickness: 50 mm Mast type: Standard Condition: Ready for use and fully functional Technical condition: very good Kdedpfx Afozwq Iks Het Front tire type: Superelastic Front tire size: 23x10-12 Rear tire type: Superelastic Rear tire size: 21x8-9 Description: In addition to this Still model, we have approximately 200 heavy-duty forklifts, compact forklifts, and side loaders in our warehouses in Hamburg and Gdansk. Visit our website – sago-online. Lease-purchase and financing options at favorable terms are always possible for us. We would also be happy to buy your used forklift outright, even if you do not purchase a vehicle from us. Our owner, Mr. Peter Sawitzki, will gladly provide you with detailed advice on this RX70-35. P.S.: Our forklift workshop specializes in repair, maintenance, overhaul, and custom modifications for forklifts from 8 tons upwards. We would also be happy to offer your vehicle for consignment sale at our location. Side shifter, Heater, Full cab.

Condition: used, functionality: fully functional, Year of construction: 2018, operating hours: 4,214 h, load capacity: 5,000 kg, lifting height: 4,140 mm, free lift: 1,310 mm, fuel type: diesel, mast type: triplex, construction height: 2,220 mm, fork carriage width: 1,310 mm, fork length: 2,400 mm, empty load weight: 8,140 kg, total length: 3,350 mm, drive type: Diesel, construction width: 1,410 mm, Diesel forklift Load center: 600 Fork width: 150 mm Fork thickness: 60 mm Mast type: Triplex Condition: Ready for use and fully functional Technical condition: Very good Kodpfxju Dzqwe Af Hjdt Front tires type: Superelastic Front tires size: 3.00-15 Rear tires Type: Superelastic Rear tires size: 28x9-15 Description: In addition to this Hyster model, we have approx. 200 heavy-duty forklifts, compact forklifts, forklift trucks & sideloaders in our warehouse in Hamburg and Gdansk. Visit our homepage - sago-online Hire purchase & financing at favorable conditions are always feasible for us. We are also happy to buy your used truck free of charge, even without you purchasing a vehicle from us. Our owner Mr. Peter Sawitzki will be happy to advise you in detail about this H5.0FT P.S.: Our forklift master workshop specializes in repair, maintenance, overhaul and special construction for forklifts from 8 tons. We are also happy to display your vehicle for sale on consignment. Sideshift, fork positioner, full free lift,

Condition: used, functionality: fully functional, Year of construction: 2019, operating hours: 8,293 h, load capacity: 16,000 kg, lifting height: 3,000 mm, fuel type: diesel, mast type: simplex, construction height: 3,320 mm, fork carriage width: 2,500 mm, fork length: 2,500 mm, empty load weight: 23,720 kg, total length: 5,325 mm, drive type: Diesel, construction width: 2,540 mm, Diesel forklift Load center: 1200 Fork width: 250 mm Fork thickness: 100 mm Mast type: Standard Condition: Ready for use and fully functional Technical condition: very good Front tire type: Pneumatic Front tire size: 12.00-20 Rear tire type: Pneumatic Rear tire size: 12.00-20 Kdodpfxjzwq Idj Af Hjt Description: In addition to this Kalmar model, we have approximately 200 heavy-duty forklifts, compact forklifts, and side loaders in our warehouses in Hamburg and Gdansk. Visit our website - sago-online. Lease-to-own and financing options are available at favorable terms. We are also happy to purchase your used vehicles outright, even if you do not purchase a vehicle from us. Our owner, Mr. Peter Sawitzki, will be happy to provide you with detailed information about this DCG150-12. P.S.: Our forklift repair shop specializes in repair, maintenance, overhaul, and custom builds for forklifts from 8 tons and up. We will also gladly offer consignment sales for your vehicle. Side shifter, fork positioner Fork positioner opening range: 685 / 2360 mm Heater, full cabin Swivel seat

Condition: used, functionality: fully functional, Year of construction: 2013, operating hours: 17,204 h, load capacity: 15,000 kg, lifting height: 3,530 mm, fuel type: diesel, mast type: simplex, construction height: 3,420 mm, fork carriage width: 2,500 mm, fork length: 1,600 mm, empty load weight: 18,400 kg, total length: 5,055 mm, drive type: Diesel, construction width: 2,550 mm, Diesel forklift Load center: 600 Fork width: 200 mm Fork thickness: 80 mm Mast type: Standard Condition: Ready for use and fully functional Technical condition: very good Front tire type: Superelastic Front tire size: 12.00-20 Rear tire type: Superelastic Rear tire size: 12.00-20 Description: In addition to this Kalmar model, we have approximately 200 heavy-duty forklifts, compact forklifts, reach trucks, and side loaders in our Hamburg and Gdansk warehouses. Visit our website - sago-online. Lease-purchase and financing at favorable terms are always possible for us. We would also be happy to buy your used forklift outright, even if you do not purchase a vehicle from us. Our owner, Mr. Peter Sawitzki, will be happy to provide you with detailed advice on this DCG 150-6. P.S.: Our forklift master workshop specializes in the repair, maintenance, overhaul, and custom construction of forklifts from 8 tons upwards. We will also be happy to display your vehicle for consignment sale at our facility. Side shifter, fork positioner, Heater, full cab, Kedeu Dzkkjpfx Af Hedt Camera

Condition: used, functionality: fully functional, Year of construction: 2013, operating hours: 4,800 h, load capacity: 4,200 kg, lifting height: 6,500 mm, free lift: 2,000 mm, fuel type: gas, mast type: duplex, construction height: 3,200 mm, fork carriage width: 3,100 mm, fork length: 1,800 mm, empty load weight: 7,900 kg, drive type: Treibgas, construction width: 3,400 mm, Four-way side loader Load center: 600 Mast type: Duplex Condition: Ready for use and fully functional Technical condition: very good Kedpfxezwq H To Af Hsdt Front tire type: Superelastic Rear tire type: Superelastic Description: In addition to this Combilift model, we have approximately 200 heavy-duty forklifts, compact forklifts, reach trucks, and side loaders in our warehouses in Hamburg and Gdansk. Visit our website - sago-online. Lease-to-own and financing options are available from us at favorable terms. We would also be happy to buy your used vehicle outright, even if you do not purchase a vehicle from us. Our owner, Mr. Peter Sawitzki, will be happy to provide you with detailed information about this C4800. P.S.: Our forklift workshop specializes in the repair, maintenance, overhaul, and special construction of forklifts from 8 tons upwards. We would also be happy to offer your vehicle for consignment sale. Fork positioner, Full cabin, full free lift

Condition: used, functionality: fully functional, Year of construction: 2023, operating hours: 601 h, load capacity: 4,990 kg, lifting height: 4,540 mm, free lift: 1,510 mm, fuel type: electric, mast type: triplex, construction height: 2,310 mm, fork carriage width: 1,480 mm, fork length: 1,200 mm, empty load weight: 8,371 kg, total length: 3,140 mm, drive type: Elektro, construction width: 1,480 mm, Electric 4-wheel forklift Load center: 500 Fork width: 150 mm Fork thickness: 50 mm Mast type: Triplex Condition: Ready for use and fully functional Technical condition: Very good Front tires type: Superelastic Front tires size: 28x12,5-15 Rear tires Type: Superelastic Rear tires size: 21x8-9 Battery Volt: 80V Battery Ah: 930Ah Battery year of construction: 2023 Kdodpfsu Dyx Tox Af Hot Description: In addition to this Clark model, we also have approx. 200 heavy-duty forklifts, compact forklifts, forklift trucks & sideloaders in our warehouse in Hamburg and Gdansk. Visit our homepage - sago-online Hire purchase & financing at favorable conditions are always feasible for us. We are also happy to buy your used truck free of charge, even without you purchasing a vehicle from us. Our owner Mr. Peter Sawitzki will be happy to advise you in detail about this GEX50 P.S.: Our forklift master workshop specializes in repair, maintenance, overhaul and special construction for forklifts from 8 tons. We are also happy to display your vehicle for sale on consignment. Sideshift, fork positioner, full free lift,