Used Handling Systems for sale (41,174)

Condition: new, Octabin emptying station. One new and one used system available. Bodpfx Adoxdr Sqsdedk

Condition: ready for operation (used), Quin Systhems PTSM322 Mini Machine Manager , serial no. according to photo ,used, good condition, 100% functional, scope of delivery according to photos Bodpfji Ecl Djx Addjdk

Condition: like new (used), Year of construction: 2021, functionality: fully functional, machine/vehicle number: 20212531, The HiTec Steam Cooker, are versatile, custom-built cookers are designed to Steamcook & pasteurize, a wide range of production needs such as gyoza, dumplins etc. Engineered with food safety,EHEDGE, efficiency, and footprint in mind. Year of construction 2021 and not used much since that! Bjdpfjxl Tnpjx Addedk

Year of construction: 1988, condition: good (used), Bucket sealer Make: Soft Electronic Systems Type: Semi-automatic bucket sealer Model: PMS 2 GH Capacity: Up to 300 buckets per hour Frame: Stainless steel Range: Buckets up to D = 300mm Dimensions: L x B x H = 1.000 x 900 x 1.000 mm Bdedoigyp Hepfx Addjk Weight: 150 Kg Power supply: 380 Volt – 50 Hz – 1,5 kW Comp. Air: > 5.5 Bar Features: manually positioning of bucket automatic seal process (adjustable time) automatic sliding towards cutting device automatic pushing and rotating knife manually reeling up the film manually removing of bucket

Condition: excellent (used), Year of construction: 1998, total length: 7,150 mm, total width: 2,550 mm, total height: 2,670 mm, UBH Universal Bulk Handling 31,345L, 20FT tank container / swap body, bottom discharge, steam heating, insulated, 5-year inspection / CSC valid until: 04-2028 = Further Information = General Information Year of manufacture: Dec. 1998 Model year: 1998 Weights Tare weight: 4,250 kg Payload: 31,750 kg Gross weight: 36,000 kg Bdedpfoxvyc Iex Addek Functional Loading compartment dimensions: 715 x 255 x 267 cm Loading compartment volume: 31,122 l Build brand: UBH Universal Bulk Handling Number of chambers: 1 Condition Technical condition: very good Optical condition: very good Further Information Contact Arne Honingh or Piet Swank for more information.

Condition: used, This listing is for the Partical Measuring Systems LASAIR lll 310c particle measuring systems The unit is in full working condition and is ready for immediate release The Lasair® III 310C is a state-of-the-art portable aerosol particle counter designed to meet the stringent requirements of highly regulated environments. Manufactured by Particle Measuring Systems (PMS), it sets the standard for portable particle counters, ensuring that your environment remains clean and compliant.​ Key Features Particle Size Range: 0.3 to 25.0 µm Flow Rate: 1.0 CFM (28.3 LPM) ±5% Counting Efficiency: Complies with ISO 21501-4 requirements Display: 8.4" color VGA IR touch screen (IP65 rated) Data Storage: Up to 3,000 complete data sets Connectivity: Ethernet, Modbus TCP/IP, RS-232, USB data downloading; optional wireless Ethernet Environmental Inputs: Four 4-20 mA inputs for external sensors Power Options: Operates on AC power or hot-swappable batteries Compliance: Meets ISO 14644-1, EU GMP Annex 1, and ISO 21501-4 standards Software Compatibility: Supports FacilityNet, PharmaceuticalNet, and FacilityPro for data analysis and reporting Reporting Capabilities: Cleanroom certification results are available through a local printout, downloadable via USB in a secure format, or through the use of external software packages Wireless Communication: Wireless network communications are facilitated with an externally mounted wireless adapter, simplifying communications with network systems ​ Specifications Dimensions: 30.1 x 32.7 x 25.9 cm Weight: 6 kg (without battery), 7.5 kg (with two optional batteries) Operating Environment: Temperature: 0 – 30°C; Humidity: 5 – 95% RH non-condensing Sample Tubing: Supports 3/8", 1/2", and 3/4" tubing up to 8 meters in length Bdjdexv A T Nopfx Addsk Sample Output Filtering: Internally filtered to >99.97% at 0.3 µm

Condition: good (used), functionality: fully functional, roll width: 410 mm, power: 0.12 kW (0.16 HP), roll spacing: 60 mm, axle spacing: 110 mm, drive type: Motorisiert, Roller conveyor curve/ curve 90 degrees Manufacturer: Soco System Condition: Used Model: Rollers Type: 90°degree Total width outside: approx. 1430 mm Total width inside: approx. 820 mm Total width incl. motor: approx. 580 mm Conveyor width: approx. 410 mm Roller spacing: approx. 60 mm Center distance: approx. 110 mm Roller type: Plastic Material: Steel/plastic Bodpfx Adottcp Ssdedk Color: Galvanized, light grey, orange Including 2 motors Soco 0.12 KW In stock: 4 pieces Price per piece The conveyor technology has run until dismantling. Condition: fully functional, with signs of use Ideal for fast material transport Pick-up address: Industriestraße 5 (47918 Tönisvorst) Expertly dismantled and packaged Thanks to the excellent workmanship of the conveyor technology, your material glides smoothly to its destination, even under heavy loads. Customized solutions for your intralogistics We are your competent partner for roller conveyors, belt conveyors, inclined conveyors or telescopic conveyors for loading and unloading your goods! We will be happy to provide you with an individual quotation or advise you on the design or installation issues. Simply let us know your requirements and the local conditions. Take advantage of our many years of experience and our excellent network of specialists. For companies in a wide range of sectors, such as logistics, the pharmaceutical industry, trade or Logistics, pharmaceutical industry, trade or the electronics industry, we have already successfully realized projects. Together we will work out ways to optimize your process and material flow in a cost-effective and sustainable manner. We can even offer you fully automated sorting technology or supplementary components such as order picking racks or containers.

Condition: new, Balance Systems 9NDRAEA0046000 SN:B512867 ,unused in opened original box, 100% functional, scope of delivery according to photos Bdjdpfx Adei D T A Rjdek

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, overall weight: 140 kg, LPG Systems LPG Cellu M 6 Endermolab 1I or optionally 2I Beauty device Body and facial unit (new) Endermolift (Ergolift) Latest global patent for facial treatments Tested by a certified trainer in beauty and therapy Completely refurbished and overhauled Fresh maintenance recently carried out New hose Refurbished KM80 roller head from 2013 New KM70 roller head or therapy head TR50 New KM50 roller head Bedpfocgy Hdjx Addedk New controller from previous owner Device has been freshly overhauled New valves, new seals, new hose New capacitors, new filter, etc. Original price: 39,980 EUR net Suitable for Endermologie body and Endermologie face treatments Optional upgrade to Ergo Lift patent 2014 for an additional 2,000 EUR Lipo massage and Endermolift technology available Like new and immediately available in Germany Optional delivery and commissioning according to LPG manual guidelines Optional starter package (Bodywear, filters, clamps, flyers) A premium device in the upper class of the medical beauty segment! Not junk like ultrasound or radiofrequency from China – Ergodrive, Ergolift 12-month warranty from date of purchase valid only with a 2-day training course and completion of the final exam Start your Endermologie season now. 100% natural mechanostimulation provides a painless yet intensive treatment. Addictive results—clients come to strengthen and firm connective tissue, reduce cellulite, and men to tighten abdominal areas. My clients typically lose up to 2 dress sizes, and the treatment has been scientifically proven to boost metabolism. Drooping eyelids and double chins can be positively influenced with the Endermolift. This patented system delivers the precision of Swiss watchmaking. For the past 14 years, I have treated and traded with older LPG devices, but the results from the latest generation convinced me to support the new Integral, Endermolab sibling models, and the Alliance. We continue to support you with application questions after purchase. Facts about LPG: 39 years of experience Global market leader in the medical beauty segment European company 175 documented clinical and scientific studies 80,000 devices produced Present in 100 countries 12 million treatments performed 200,000 treatments per day Leasing available from our partner bank E.g., 399 EUR/month Images are for reference; always new devices available You matter to us after your purchase! References available nationwide Clients: Doctors, therapists, cosmeticians, etc.

Condition: excellent (used), This machine was filling capsules and tablets into small tubs. The whole line is also available. Bottles are loaded into the line from lazy susan, product is counted and doses into the tub or bottle which is then foil sealed before the screw lid is applied. All machines were bought new in 2015 and appear to be in excellent condition. The counter is a Vitacount 12-1 Bdsdpjxm S Hmofx Addjk

Condition: excellent (used), Year of construction: 1997, total length: 7,150 mm, total width: 2,550 mm, total height: 2,670 mm, UBH Universal Bulk Handling 31,169L, 20FT tank container / swap body, bottom discharge, steam heating, insulated, 5-year inspection/CSC valid until: 05-2027 Bjdpfoxurqnox Addsdk = Further Information = General Information Year of manufacture: Oct. 1997 Weights Tare weight: 4,375 kg Payload: 31,625 kg Gross vehicle weight: 36,000 kg Functional Cargo compartment dimensions: 715 x 255 x 267 cm Cargo volume: 31,122 l Body manufacturer: UBH Universal Bulk Handling Number of compartments: 1 Condition Technical condition: very good Visual condition: very good Further Information Please contact Arne Honingh or Piet Swank for more information.

Condition: excellent (used), Year of construction: 2012, operating hours: 2 h, functionality: fully functional, overall weight: 25 kg, type of input current: DC, input voltage: 220 V, power: 220 kW (299.12 HP), volume flow: 4.6 m³/h, control voltage: 24 V, year of last overhaul: 2025, Volumetric feeder type DM30-38 with horizontal feed line Equipped with D.50 mm screw at 50 mm pitch Supplied without hopper 1/38 brushless geared motor - 220 W - 3000 rpm Bdedpferl Rv Tsx Addsk Power supply 220 V mono 50 Hz Weight : 25 kg

Condition: ready for operation (used), Specifications: Model: 1120SPL Manufacturer: Hosokawa Polymer Systems (USA) Cutting chamber: 11" x 20" (279mm x 508mm) Motor: 20 HP / 15 kW, 400V, 3 Phase Rotor diameter: 12.5" (318mm) Rotor knives: 3 Bed knife: 1 Screen area: 373 in² (2406 cm²) Typical throughput: up to 650 lbs/hr (≈295 kg/hr) depending on material and screen size Approx. weight: 1,600 lbs (726 kg) Dimensions: L 69” x W 36” x H 57” (1753 x 914 x 1448mm) Features: Heavy-duty welded steel construction Easy access for cleaning and maintenance Safety interlocks and belt-driven motor Ideal for press-side, post-production, or recycling use Clean and well-maintained unit – ready to run Bodpexvc D Uefx Addedk

Condition: new, Balance Systems 9SGJ025A050200 Digitally operated balancing head, SN:B512879, unused in opened original packaging, 100% functional, scope of delivery as per photos Bjdpji D T Dnofx Addsdk

Condition: excellent (used), operating hours: 2,658 h, functionality: fully functional, pressing force: 71 t, filling opening width: 1,000 mm, filling opening length: 1,620 mm, bale width: 1,100 mm, bale height: 720 mm, bale weight: 600 kg, input current: 200 A, oil tank capacity: 1,250 l, empty load weight: 29,000 kg, Technical data baler: Manufacturer BOA Recycling Systems B.V. Type M75-45-A-5-1.6 Ecoline Year of construction 2021 Hours of operation 2,658 hours (as of May 2024) Number of pressed bales 42,212 pieces (as of May 2024) Press power main press 71,2 kN (71 t) Specific press capacity 9 kg/cm² Operating pressure 280 bar Cylinder stroke 2,200 mm Feed channel 1,620 x 1,000 mm Capacity per cycle time 2,4 m³ Theoretic cycle time 21 seconds Theoretic throughput rate 450 m³/hour Bale size 1,100 x 720 mm, length variably adjustable up to 1,400 mm Driving motor 45 kW Connected load 100 kW Current consumption 200 A Tying system 5-fold vertical, fully automatic, the press stamp is prepared for an additional 3-fold horizontal binding Throughput rate at a bulk weight of 30 kg/cbm approx. 13,6 tons/hour bulk weight of 50 kg/cbm approx. 24,2 tons/hour bulk weight of 100 kg/cbm approx. 36,4 tons/hour bulk weight of 150 kg/cbm approx. 54,7 tons/hour Bale weight up to 600 kg, depends on material Volume hydraulic oil tank 1,250 l SPS controller Siemens S7 1500 Operating panel Siemens SIMATIC HMI TOUCH Transport dimensions of press 10,000 x 2,800 x 3,385 mm (l x w x h) Press height set up with feed chute 4,743 mm Press height with conveyor belt 7,123 mm Machine weight baler approx. 29 tons Bdsdpfou Thcvjx Addjk Noise level <85 dB (A) Condition of the baler: With 2,658 operating hours, the press is almost as good as new and in very good condition, has hardly any signs of wear and is ready for immediate use. Due to larger material input quantities, the pressing force and throughput of the machine no longer meet the customer's current requirements and is therefore being replaced by a new 120 tonne baler. Only the baler is for sale, without conveyor belt and wire drawing stations. Comments: The documentation (Manual, CE, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: used, Year of construction: 2016, Overview  This inspection system was manufactured in 2016 by FT System (Italy). The machine is still in operation in Spain and can be visited in person. It is available due to changes in the production process and is no longer needed by the current owner. Technical data  Capacity: 8,000 bph Formats: 0.75 L bottles Functions: Neck inspection, wall inspection, bottom inspection, washing liquid residue detection Dimensions: 318 × 152 × 235 cm Weight: 1,022 kg Scope of Delivery  Main bottle bottom inspection module Mouth integrity control Wall inspection Washing liquid residue detection Push expulsion Progressive expulsion CIP Astigarraga   Bsdpfxexfccio Addodk

Condition: excellent (used), Year of construction: 2019, machine/vehicle number: SO-22949/1/19, REF: MM6218 1 X Sparc Systems 8-lane linear weighing combination system. Technical specification⚙️ ✅ Model - LCWS. ✅ Serial - SO-22949/1/19. ✅ Overall dimensions - 1620mm long x 920mm wide x 1620mm high. Bjdpsxd Thmjfx Addedk Note 🗒️ Seller has a quote for service and getting production-ready at cost of £12-15k per unit.

Condition: excellent (used), Year of construction: 2014, Infrared dryer for textiles Bjdpoxnzt Sofx Addsdk the oven is 2.12 m wide the conveyor belt is 1.73 m wide, 4.45 m long, 1.75 m high plus 1 m extractor

Condition: used, Year of construction: 2016, Used Filling Monoblock MITSUBISHI up to 39000 BPH It is extremely important to note that this machine is complementary to it’s rinsing machine: (click here). The Filling Monoblock Mitsubishi offers an advanced solution in the bottling sector. Specifically designed to handle a wide range of liquids, it boasts a capacity of up to 39,000 BPH. Bodpovgvlkjfx Addodk Technical Specifications of Model FHRJ80M Mitsubishi Heavy Industries Mechatronics Systems Ltd manufactured the FHRJ80M model in 2016 to meet the growing demands for speed and precision in bottling. Equipped with 80 valves, this weight-based filling system accurately doses products, significantly minimizing waste. Moreover, the system fills aluminum bottles in various sizes ranging from 0.29L to 0.41L. Thus, it showcases its versatility for handling different types of liquids such as coffee (last product that has been filled by this monoblock), liquid soap, oil, and spirits. Bottling and Capping Features Furthermore, the Mitsubishi FHRJ80M monoblock integrates a capping function with 24 heads, accommodating aluminum screw caps of 28 mm and 38 mm. Its clockwise rotation direction eases integration into existing production lines. Additionally, the precision in cap placement and swift execution ensure the process’s efficiency, which is crucial for preserving product integrity and container safety during transport and storage. Storage and Maintenance Currently stored in a warehouse, the Filling Monoblock Mitsubishi remains in excellent condition to ensure its functionality and readiness. Also, the availability of instruction manuals aids in maintenance and repair operations, which are essential for extending the machine’s lifespan and maintaining optimal performance. Integrated safety features protect operators and the machinery, thereby reducing accident risks during operation. Conclusions of the Filling Monoblock Mitsubishi Finally, the used Mitsubishi FHRJ80M filling monoblock serves as an optimal solution for those seeking efficiency and reliability in the bottling industry. Its adaptability to various formats and product types, along with the precision of its filling and capping system, make it ideal for a broad range of industrial applications. With proper maintenance and careful management, this monoblock can deliver high performance, significantly enhancing production process optimization. This model not only meets but also exceeds industry expectations in terms of functionality and performance.

Year of construction: 2010, condition: new, functionality: fully functional, Technical specifications: • Manufacturer: JMC Recycling Systems Ltd. (England) • Model: Dolphin 5005-Lite • Year of manufacture: 2010 • Connection: 380–415 V, 3-phase • Recommended hydraulic oil: ISO 46 • Robust construction, mobile on wheels • Includes control unit and hydraulic drive Condition: • NEW, unused • Only storage marks present (see pictures) • No operating hours Bedpfx Asxm Uf Seddedk

Condition: as good as new (ex-display), fuel type: electric, Mobile crane Battery truck Device bought from stock, condition as shown in the photos, brand new, only 50 hours of work. Bdedsvfuk Nopfx Addjk Hydraulic drive. Capacity 700 kg Control from the steering wheel or the desktop. Charger included. Smooth speed control, safety button, horn, ignition switch.

Condition: used, Year of construction: 2020, Monoblock for rinsing, filling and capping glass bottles. 1. Rinser: Rinsing tower with 6 grippers for single-stage rinsing of empty bottles. 2. Filler: Filling tower with 6 electro-pneumatic backpressure valves. 3. Capping machine: Stainless steel cap container with cap conveyor and capping head 4. Bottle exterior washer Additional title: Counterpressure filler with 6 filling valves, sealer with one sealing head Capacity: 1100 bo/h referring to 0,33 l bottles Filling temperature: 2 °C Length: 2,20 m Bdedpfx Aow Tbgdjddjk Width: 1,90 m Height: 2,10 m Formats: Euro 0.5 l and 0.33 l; 26 mm crown caps Running direction: clockwise Operation / Control: Schneider Electric Base construction: Monobloc; Stainless steel housing on feet with plexiglass doors Features: Rinser with 6 grippers, filler with 6 filling valves, capper with one capping head, bottle exterior washer, beer pump, free bottle transport

Condition: excellent (used), REF: MM6209 1 x Ling Systems stainless steel heat shrink tunnel. Bdsdpfxjxdi R Rj Addek Technical specification ⚙️ ✅ Manufacturer - Ling Systems ✅ Belt width - 395mm (370mm useable). ✅ Electrical requirements - 3 phase. ✅ Overall dimensions - 2550mm long x 1160mm wide x 2250mm high.

Condition: used, Year of construction: 2016, Used Rinsing Machine MITSUBISHI for aluminum bottles up to 39000 bph It is extremely important to note that this machine is complementary to it’s filling monoblock: (click here). Introduction to the Used Rinsing Machine MITSUBISHI This rinsing machine serves as an advanced solution for the bottling industry. Specifically, Mitsubishi Heavy Industries Mechatronics Systems Ltd. manufactures this 2016 model RNR100H machine to ensure effective cleaning of aluminum bottles. Consequently, it addresses the critical need for efficient and reliable rinsing processes in high-demand production environments. Operational Capacity and Speed The RNR100H operates at an impressive capacity of 39,000 bottles per hour, making it ideal for high-speed production lines. Additionally, the machine handles aluminum bottles in various formats, including 0.29L, 0.3L, 0.31L, 0.4L, and 0.41L, thereby adapting to specific production needs. Moreover, the grippers rotate clockwise, which optimizes workflow and significantly enhances the rinsing process’s efficiency. As a result, manufacturers can achieve higher throughput without compromising on quality. Gripper System and Double Treatment Furthermore, the  Rinsing Machine MITSUBISHI  features 100 grippers, allowing it to treat numerous bottles simultaneously. This double treatment system involves two distinct phases: firstly, the machine uses water containing hypochlorous acid for effective disinfection. Subsequently, the second phase employs pure water to ensure the complete removal of chemical residues. Therefore, this dual-step approach guarantees thorough cleaning and minimizes the risk of contamination. Bsdpfxevgvhxo Addjdk Compatibility with Filling Machines A crucial technical aspect of the RNR100H lies in its compatibility with various filling machines. Specifically, the filling machines must have a corresponding height between 120 and 200 mm and a diameter between 50 and 80 mm. These parameters ensure optimal integration with existing production lines, thereby reducing adaptation times and enhancing operational continuity. Consequently, manufacturers can seamlessly incorporate the rinsing machine into their workflow without significant downtime. Mechanical Structure and Maintenance Moreover, the mechanical structure of the Used Rinsing Machine MITSUBISHI for aluminum bottles up to 39000 bph guarantees durability and reliability. The machine’s components, made from high-quality materials, resist corrosion and wear, ensuring a long operational life even in intensive production environments. Additionally, the modular design facilitates preventive maintenance, allowing for the rapid replacement of worn parts. As a result, downtime is minimized, and maintenance costs are effectively controlled. Energy Efficiency Used Rinsing Machine MITSUBISHI for aluminum bottles up to 39000 bph From an energy perspective, the RNR100H optimizes energy usage to reduce consumption without compromising performance.

Condition: used, Year of construction: 2020, Cold glue labelling machine for wrap-around labelling of glass bottles. The glue is applied to the bottle in horizontal strips. A roller affixes the labels to the bottle. Bjdpfxjw Ta Rhs Addsdk Additional title: cold glue labeling Capacity up to: 6000 bo/h for cylindrical glass bottles Max. label length: 285 mm Formats: Euro 0.5 l and 0.33 l; wrap-around labels Operation / Control: control panel on machine side Base construction: Stainless steel housing on feet with plexiglass doors Features: Label magazine, 2.5 m motorised bottle conveyor belt, pneumatic glue pump, control panel on the side of the machine