Used Harbeck Hamburg for sale (1,022)

Condition: used, functionality: fully functional, Year of construction: 2021, operating hours: 10,558 h, load capacity: 9,000 kg, lifting height: 18,600 mm, load center: 1,220 mm, fuel type: diesel, mast type: simplex, construction height: 10,350 mm, motor manufacturer: Volvo, front tire size: 14.00x24, rear tire size: 14.00x24, total length: 6,900 mm, total width: 4,100 mm, color: red, Equipment: cabin, centralized greasing system, lighting, Kalmar DCG90-45ES7 Year of manufacture: 2021 Weight: 10,488 Mast: Duplex standard lift mast with hydraulically adjustable side spreader Tires: 14.00 * 24 Guedpfowa Skzsx Anxob

Condition: used, functionality: fully functional, Year of construction: 2020, operating hours: 8,215 h, fuel type: diesel, front tire size: 315/80R22.5, rear tire size: 315/80R22.5, empty load weight: 10,300 kg, color: original, Kalmar TR618i Year of manufacture: 2020 Wheelbase: 8,215 Godpfxswa Swnj Anxoub Maximum gross weight at 5 km/h Front axle: 19,000 kg Rear axle: 40,000 kg Fifth wheel: 32,000 kg Including road approval 25 km/h

Condition: used, functionality: fully functional, Year of construction: 2007, operating hours: 10,097 h, load capacity: 4,000 kg, lifting height: 3,980 mm, free lift: 1,940 mm, fuel type: gas, mast type: duplex, construction height: 2,780 mm, fork carriage width: 1,360 mm, fork length: 1,200 mm, empty load weight: 6,100 kg, total length: 2,200 mm, drive type: Treibgas, construction width: 2,320 mm, Four-way side loader Load center: 600 Fork width: 150 mm Fork thickness: 50 mm Mast type: Duplex Condition: Ready for operation and fully functional Technical condition: Very good Front tires type: Superelastic Front tires size: 27x10-12 Rear tires type: Superelastic Gjdpey Hx Utefx Anxeub Rear tires size: 200/50-10 Description: In addition to this Combilift model, we have around 200 heavy-duty forklifts, compact forklifts, industrial trucks, and side loaders in stock at our Hamburg and Gdansk warehouses. Visit our website - sago-online. Hire purchase and financing on favorable terms are always possible for us. We are also happy to purchase your used equipment directly, even if you do not buy a vehicle from us. Our owner, Mr. Peter Sawitzki, will be happy to advise you in detail on this C4000. P.S.: Our master forklift workshop specializes in repair, servicing, overhaul, and special construction for forklifts from 8 tons. We are also happy to offer your vehicle on commission sale in our facility. Heater, Full cab, Full free lift,

Condition: used, functionality: fully functional, Year of construction: 2012, operating hours: 9,541 h, load capacity: 5,000 kg, lifting height: 6,510 mm, free lift: 2,160 mm, fuel type: electric, mast type: triplex, construction height: 2,910 mm, fork carriage width: 1,460 mm, fork length: 1,500 mm, empty load weight: 8,313 kg, total length: 2,960 mm, drive type: Elektro, construction width: 1,440 mm, Electric 4-wheel forklift Load center: 500 Fork width: 150 mm Fork thickness: 60 mm Guodpfx Aowri Uujnxsb Mast type: Triplex Condition: Ready for use and fully functional Technical condition: very good Front tires type: Super elastic Front tires size: 355/45-15 Rear tires type: Super elastic Rear tires size: 200/75-9 Battery voltage: 80V Battery Ah: 930Ah Battery year: 2021 Description: In addition to this Mitsubishi model, we have about 200 heavy-duty forklifts, compact forklifts, forklifts & side loaders in our warehouses in Hamburg and Gdansk. Visit our homepage - sago-online Lease-purchase & financing on favorable terms are always possible for us. We are also happy to buy your used equipment, even if you do not purchase a vehicle from us. Our owner Mr. Peter Sawitzki will advise you in detail on this FB50. P.S.: Our master forklift workshop specializes in repair, maintenance, overhaul, and custom construction for forklifts from 8 tons. We are also happy to display your vehicle for consignment sale. Sideshift, Fork positioner, Full free lift,

Condition: used, functionality: fully functional, Year of construction: 2021, operating hours: 7,865 h, load capacity: 6,000 kg, lifting height: 6,570 mm, free lift: 2,240 mm, fuel type: gas, mast type: triplex, construction height: 3,630 mm, fork carriage width: 1,550 mm, fork length: 1,580 mm, empty load weight: 9,800 kg, total length: 4,160 mm, drive type: Treibgas, construction width: 2,500 mm, Four-way Side Loader Load Centre: 600 Fork Width: 200 mm Fork Thickness: 65 mm Mast Type: Triplex Condition: Ready for use and fully functional Technical Condition: Very good Front Tyres Type: Superelastic Front Tyres Size: 355/65-15 Rear Tyres Type: Superelastic Rear Tyres Size: 27x10-12 Description: In addition to this Combilift model, we have approximately 200 heavy-duty forklifts, compact forklifts, standard forklifts, and side loaders available in our Hamburg and Gdansk warehouses. Visit our website – sago-online. Hire purchase and financing at attractive terms are always possible with us. We are also happy to purchase your used machine outright, even if you do not buy a vehicle from us. Our owner, Mr. Peter Sawitzki, will be happy to provide you with detailed advice on this C6000SL. P.S.: Our master forklift workshop specializes in repair, maintenance, overhaul, and custom builds for forklifts from 8 tons upwards. We can also offer to display your vehicle for commission sale in our facilities. Gusdpfx Asyvwc Usnxeb Fork positioner, heater, full cabin, full free lift,

Condition: excellent (used), functionality: fully functional, mileage: 5,54,105 km, power: 375 kW (509.86 HP), first registration: 08/2011, fuel type: diesel, empty load weight: 11,124 kg, maximum load weight: 16,876 kg, overall weight: 30,000 kg, tire size: 385/65R22,5, axle configuration: 6x4, wheelbase: 4,300 mm, next inspection (TÜV): 02/2027, fuel: diesel, brakes: retarder, color: green, driver cabin: sleeper cab, gearing type: automatic, emission class: euro5, suspension: air, number of seats: 2, total length: 8,960 mm, total width: 2,550 mm, total height: 3,300 mm, Year of construction: 2011, Equipment: ABS, AdBlue, additional headlights, air conditioning, airbag, central locking, cruise control, differential lock, electric window regulation, fog lights, full service history, onboard computer, parking heater, power assisted steering, power mirror, retarder, seat heater, soot filter, tachograph, trailer coupling, truck registration, Model: VOLVO FH500 6x4 JOAB Cameleont Air/Air First registration: 18.08.2011 Mileage: 554,105 km (original) Engine power: 375 kW Engine displacement: 12,777 cm³ Body: JOAB hooklift system with remote control (not tested!) Last inspection at 536,904 km according to the previous owner! Front mounting plate with hydraulic connections Trailer coupling Auxiliary heater Antennas Radio/Cassette/CD/MP3 Air conditioning 2x air-suspended seats with seat heating, fully adjustable 1x bunk Electric windows Electrically adjustable exterior mirrors Multifunction steering wheel Speed limiter Sun visor Work lights Fog lights High beam Warning beacon Toolbox Aluminum fuel tank Emission class: 5 Ad-Blue Retarder/Intarder/Engine brake Axle configuration: 6x4 Differential lock Wheelbase axle 1 to 2: 4,300 mm Wheelbase axle 2 to 3: 1,370 mm Tire size axle 1 (front): 385/65R22.5 Tire size axle 2 (rear): 315/80R22.5 Tire size axle 3 (rear): 315/80R22.5 Air suspension / Air suspension Wheel covers Curb weight: 11,124 kg Payload: 16,876 kg Gross vehicle weight: 30,000 kg Overall vehicle dimensions (L x H x W): 896 cm x 330 cm x 255 cm Our vehicles are generally listed with valid TÜV and emissions inspection. Usually, these are foreign inspection certificates, which are sufficient for the issuance of export license plates. For a valid TÜV and emissions inspection according to German standards, please contact us in individual cases. Gujdoy Sardjpfx Anxjb You can also reach us for more information and pictures via WhatsApp, Telegram, Viber, and Signal. Please contact us directly by phone or by WhatsApp message! Deutsch (German): Wir sprechen Deutsch und Englisch, aber Sie können uns gerne in Ihrer Sprache eine Nachricht schicken! English (English): We speak German and English, but feel free to send us a message in your language! Español (Spanish): Hablamos alemán e inglés, pero no dude en enviarnos un mensaje en su idioma. Português (Portuguese): Falamos alemão e inglês, mas fique à vontade para nos enviar uma mensagem no seu idioma! Français (French): Nous parlons allemand et anglais, mais n'hésitez pas à nous envoyer un message dans votre langue! Italiano (Italian): Parliamo tedesco e inglese, ma non esitate a inviarci un messaggio nella vostra lingua! Русский (Russian): Мы говорим на немецком и английском, но вы можете написать нам сообщение на своем языке! Trade-in possible! Price is net! We can deliver your vehicle directly to the ports of Hamburg, Kiel, Bremerhaven/Cuxhaven, Lübeck in Germany or Antwerp/Belgium and Amsterdam. We can ship the vehicle worldwide for you! Export license plates available on request! We support you with the export, original data confirmation for country homologation, supplier declaration, preparation of export documents, and customs license plates if required. Viewing and test drive possible at any time, including weekends, by prior telephone appointment! Disclaimer: The buyer is obliged to independently verify the condition, dimensions, and equipment of the goods/vehicles. All information is given without guarantee. Subject to changes, prior sale, and errors.

Condition: used, functionality: fully functional, machine/vehicle number: EPS-045-HH2, The briquetting plant was used for compacting Styrofoam. Gujdsy R Ua Hjpfx Anxeb

Condition: ready for operation (used), Year of construction: 2020, Immediately available ex location: As-new PLANOLITH surface plate, DIN 876/1 Gsdpsy R Racjfx Anxsub Year of manufacture: 20020 With original stand Dimensions: 1500 x 1000 x 400 mm Weight: 1100 kg Price: EUR 1,250 plus VAT, ex location.

Condition: ready for operation (used), Year of construction: 2003, Immediately available ex works: 5-axis (3 plus 2) machining centre Deckel Maho Type DMU 35 M Year of manufacture: 2003 Siemens 810 D control Electronic handwheel Universal tilting/rotary table 400 x 290 mm Travel X/Y/Z: 350/240/340 mm Spindle taper SK 40 Spindle speeds: 20 – 6300 rpm Drive: 6.3/10 kW Table load: 100 kg Rotation range: 360 degrees Swivel range: plus 105 / minus 15 degrees Distance spindle nose – table: 145/485 mm Feed rates up to 3000 mm/min Weight: 1750 kg Price: Euro 4,500.—plus VAT ex location Guodpfoy R N U Sjx Anxob

Condition: ready for operation (used), Year of construction: 2001, Immediately available ex-site: 5-Axis Machining Centre Deckel Maho Model: DMU 50 M Year of manufacture: 2001 Control system: Heidenhain TNC 124 5 axes (3 + 2) Manual rotary axes with B and C swivel rotary table B and C axes are displayed on the control Godpey R N Uxefx Anxsub Table size: 700 x 500 mm Travel paths X/Y/Z: 500 / 400 / 400 mm Table load capacity: 200 kg Spindle taper: SK 40 Spindle speeds: 20 – 4,500 rpm Drive power: 9 / 13 kW C-axis rotation range: 360 degrees Swivel range: plus 95 / minus 10 degrees Feed rate up to 5,000 mm/min Spindle speeds: 20 – 4,500 rpm Weight: 3 tonnes Coolant system Price: EUR 8,500.— net, ex-site, plus VAT.

Condition: ready for operation (used), Year of construction: 1999, Available immediately ex location: CNC Vertical Machining Center EMCO Type VMC 600 Year of manufacture: 1999 Heidenhain TNC 426 D Gedpfx Ajy R N Urjnxjub Electronic handwheel Travel X/Y/Z: 1200/410/370 mm SK 40 24-position tool magazine Speeds up to 6,000 rpm 3 vices Weight: 4 t Price: EUR 6,500.-- plus VAT, ex location SK 40

Condition: ready for operation (used), Year of construction: 1977, Immediately available from site: Universal profile steel shear with punching unit Peddinghaus Model 210 / 16 Gsdjy R N Ufopfx Anxjub Year of manufacture: 1977 Pressing force: 60 t Punching: 27 x 19 mm Round steel: 50 mm Square: 45 x 45 mm Flat steel: 150 x 19 mm Punching: 27 x 19 mm L profile 90 degrees: 130 x 13 mm L profile 45 degrees: 100 x 11 mm T profile 90 degrees: 130 x 15 mm T profile 45 degrees: 100 x 11 mm Drive: 5.5 kW Weight: 3 t Many punching tools included Price: €1,500 plus VAT, ex site

Condition: ready for operation (used), Year of construction: 1992, Hydraulic Profile Steel Shear Peddinghaus Hydraulic machine with 5 stations for punching, notching, shearing flat steel, angle steel, and solid material. Punch activation by hand lever, profile shear with foot pedal. Throat depth: 510 mm Press force: 60 tons Throat depth: 510 mm Shearing capacity: 500 x 12 or 400 x 16 mm Punching diameter: 27 mm in 17 mm plate Punching diameter: 39 mm in 12 mm plate Round steel: 45 mm Square steel: 40 mm Angle steel: 120 x 13 mm Flat steel: 500 x 12 mm Drive: 7.5 kW Oil capacity: 80 liters Weight: 3 t Gujdpfxoy R N T Io Anxob Price: EUR 3,000 plus VAT, ex works.

Condition: ready for operation (used), Year of construction: 1992, Immediately available due to business closure: CNC press brake Lotze Model 327 x 1500 kN Year of manufacture: 1992 Cybelec DNC 70 control Press force: 150 t Working length: 3500 mm CNC-controlled backgauge Godpfxjy R N Tno Anxeub Throat depth: 300 mm Stroke: 300 mm Drive: 15 kW Complete set of top and bottom tools (prisms) Weight: 12 t Price: EUR 6,500 plus VAT ex location

Condition: ready for operation (used), Year of construction: 1993, Immediately available ex location: Hydraulic Guillotine Shear Steiner Gedpjy R N Thjfx Anxoub Type HTS 30 113 Year of manufacture: 1993 CNC-controlled digital backgauge 1000 mm Light barriers Cutting length 3200 mm Material thickness up to 13 mm Throat depth 300 mm Stroke 300 mm Drive power 15 kW Weight 15 t Price: EUR 6,500 plus VAT, ex location

Condition: ready for operation (used), Year of construction: 1981, Immediately available ex works: Hydraulic guillotine shear Köllschen Model BSH 2000/12.5 Year of manufacture: 1981 Cutting length: 2050 mm Material thickness: up to 12.5 mm Motorized backgauge: 5 – 1000 mm Drive power: 15 kW Weight: 11 t Gusdoy R N S Rspfx Anxob Price: EUR 3,000 plus VAT ex location

Condition: ready for operation (used), Year of construction: 1980, Immediately available ex location: Lotze Guillotine Shear Type K 20 TS 2000 x 3 Year of manufacture: 1980 Cutting length: 2000 mm Gsdpfey R N S Dox Anxsub Material thickness: 3 mm Drive: 5 kW Back gauge: 750 mm Weight: 3,200 kg Price: EUR 1,500 plus VAT, ex works

Condition: ready for operation (used), Year of construction: 2010, Immediately available ex location: Gsdpfxsy R N Sqo Anxjub CNC bed milling machine Wagner Type WBE 1300 R Year of manufacture: 2010 Siemens Sinumerik 810 D Table 1500 x 400 mm Travel X/Y/Z: 1300/500/570 mm SK 40 Automatic tool clamping Drive power 12/9 kW Spindle speeds 60 – 8,000 rpm Electronic handwheel Ball screw Vice Various tool holders Weight 4 t Price: EUR 5,500 plus VAT ex location

Condition: ready for operation (used), Year of construction: 2000, Immediately available from location: CNC bed-type milling machine MTE Model Kompakt Plus Year of manufacture 2000 Gusdpfx Ajy R N Skonxeb Heidenhain TNC 410 Table 2200 x 750 mm Travel X/Y/Z 2000/800/800 mm Table load capacity 4 t Spindle taper SK 50 Hydraulic tool clamping Spindle speeds 40 – 2500 rpm Spindle power 15 kW Total power requirement 30 kW Coolant system Weight 12 t At a price of EUR 11,000—plus VAT, ex location

Condition: ready for operation (used), Year of construction: 2009, Available immediately ex location: CNC bed-type milling machine Iberimex Model Ecomill BF 2600 Guodpfx Ansy R N R Tjxob Year of manufacture 2009, low operating hours Heidenhain iTNC 530 Table 2700 x 1050 mm Travel ranges X/Y/Z 2600/1000/950 mm Table load 6 t Internal coolant supply (IKZ) 14 bar Hydraulic tool clamping SK 50 spindle taper Spindle speeds 24 - 1600 rpm Spindle drive 25 kW Chip conveyor Weight 14 t Price: €21,000 plus VAT, ex location.

Condition: ready for operation (used), Year of construction: 1989, Immediately available from training center: Universal Milling Machine Horizontal - Vertical WMW Auerbach Type FW 250 x 1000 / 2 Year of manufacture: 1989 Table: 1250 x 250 mm Table load capacity: 1250 kg Travel X/Y/Z: 700 / 400 / 500 mm Heidenhain 3-axis digital readout SK 40 Gjdpsy R N R Hjfx Anxeub Spindle speeds: 55 – 2800 rpm Feeds: 10 – 630 mm/min, stepless Vertical head Horizontal milling device Drive power: 6.3 kW Weight: 2.5 t Offered at EUR 2,000 – plus VAT, ex location

Condition: ready for operation (used), Year of construction: 1989, Available immediately from location: MAHO Toolroom Milling Machine Gusdpfx Asy R N Rtjnxjb Type MH 500 M Year of manufacture 1989 Heidenhain Digital Display Table 800 x 360 mm SK 40 Spindle speeds 63 – 4000 rpm Quill stroke 50 mm Travel X/Y/Z 500/380/350 mm Drive 3 kW Feed rates 10 – 1000 mm/min Coolant system Weight 1600 kg Adapters Hydraulic vise Price: €3,000 plus VAT, ex location

Condition: ready for operation (used), Year of construction: 1984, Immediately available from training center: MAHO Tool Milling Machine Model MH 600 Year of manufacture: 1984 Table: 700 x 400 mm Gusdpfx Aney R N Rmsxob Travel X/Y/Z: 500/400/400 mm Speeds: 40 – 2500 rpm SK 40 Spindle stroke: 80 mm Coolant system Drive: 4 kW Feeds: 8 – 400 mm/rev Head swivels 90/90 degrees Weight: 1900 kg Price: EUR 2,250.-- plus VAT, ex location.

Condition: ready for operation (used), Year of construction: 2000, Immediately available from Swiss toolmaking: 5-axis milling machine Deckel Maho Type DMU 35 M Year of manufacture: 2000 CNC control: Heidenhain TNC 310 M Electronic handwheel Table 400 x 280 mm Table load up to 100 kg Travel X/Y/Z: 350/240/340 mm Infinitely variable spindle speeds: 0 – 5,000 rpm Taper SK 40 Rapid traverse 5 m/min Servo motors for X/Y/Z axes Swivel range 360 degrees Table clamping plus 105/minus 150 degrees Weight 2 t Gsdoy R N Rgopfx Anxoub Accessories, hydraulic vise Price: EUR 5,000.—plus VAT, ex works

Condition: ready for operation (used), Year of construction: 1996, Immediately available ex location: CNC universal milling machine Reckermann Type: Primo II Guodpfxsy R N N Aj Anxob Year of manufacture: 1996 Heidenhain TNC 430 control Spindle taper SK 50 Infinitely variable spindle speeds: 20 – 2,000 rpm Table load capacity: 1,000 kg Stepless feed rates: 20 – 6,000 mm/min Travel (X / Y / Z): 1,000 / 400 / 350 mm Drive: 7.5 kW Weight: 4 t Price: EUR 2,500 plus VAT, ex location