Used Harding Bridge Port for sale (7,121)

Condition: used, Year of construction: 1996, functionality: fully functional, travel distance X-axis: 1,020 mm, travel distance Y-axis: 520 mm, travel distance Z-axis: 500 mm, controller model: Heidenhain TNC370, overall weight: 3,600 kg, spindle nose: SK40, Equipment: documentation/manual, Bridgeport VMC1000-22 Heidenhain TNC370 control X-Y-Z 1020-520-500 mm 6.000rpm SK40 Isdpfxez Iugcs Anisih 22 Toolchanger Built 6-1996 Machine is under power

Condition: used, Year of construction: 2003, functionality: fully functional, machine/vehicle number: 950693, travel distance X-axis: 1,020 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 600 mm, rapid traverse X-axis: 43 m/min, rapid traverse Y-axis: 43 m/min, rapid traverse Z-axis: 30 m/min, nominal power (apparent): 20 kVA, controller manufacturer: Heidenhain, controller model: iTNC 530, workpiece weight (max.): 900 kg, total height: 2,682 mm, total length: 2,340 mm, total width: 2,830 mm, table width: 580 mm, table length: 1,150 mm, table load: 900 kg, rotational speed (max.): 12,000 rpm, overall weight: 4,400 kg, spindle speed (min.): 40 rpm, spindle speed (max.): 12,000 rpm, operating hours of spindle: 9,150 h, spindle motor power: 13,000 W, spindle nose: BT-40, number of spindles: 1, number of slots in tool magazine: 30, tool length: 250 mm, tool diameter: 130 mm, tool weight: 6,000 g, input voltage: 400 V, type of input current: three-phase, Equipment: documentation/manual, rotational speed infinitely variable, Bridgeport VMC 1000XP with 5 tool holders Year of manufacture: 04/2003 Serial number: 950693 3 axes Travel: X: 1020 mm, Y: 610 mm, Z: 600 mm Rapid traverse rate X and Y: 43 m/min, Z: 30 m/min Positioning accuracy: ±0.005 mm Repeatability: ±0.002 mm Y-axis with 4 guide rails Table: 1150 x 580 mm Table load: 900 kg Spindle motor power: 13 kW Speed: 12000 rpm Spindle taper: BT 40 Dual-arm tool changer: 30 tools Tool change time: 5.2 sec Blum measuring probe TC52 Oil mist extraction Coolant system Automatic central lubrication Vacuum monitor for operating a vacuum clamping plate Control: Heidenhain iTNC 530 Connection: 400 V, 3-phase, 50 Hz; Full load current 30 A, Total current 20 kVA Pneumatics: Compressed air 5.5 bar Dimensions: 2830 x 2340 x 2682 mm Weight: 4400 kg Spindle operating time: 9150 h The machine was mainly used for machining aluminum and plastic, so the guide rails and spindle are in very good condition. Including 5 tool holders: 1 Weldon chuck, Ø16 Iedpfxezbqx So Anijih 1 collet chuck OZ DIN 6388, Ø 2-16 1 collet chuck OZ DIN 6388, Ø 6-25 1 milling cutter holder 1 short drill chuck, Ø 1-13 mm

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, controller model: Heidenhain TNC 410, rotational speed (max.): 10,000 rpm, TECHNICAL DETAILS Iisdpfxsz Hxcle Anioh Travel range, X-axis: 800 mm Travel range, Y-axis: 500 mm Travel range, Z-axis: 500 mm Spindle speed range: 0–10,000 rpm Spindle speed control: stepless Tool holder: SK 40 Magazine capacity: 20 MACHINE DETAILS Control system: Heidenhain TNC 410 Workpiece clamping area: 1,000 × 500 mm EQUIPMENT Fixed angular table Vertical tool changer Full enclosure with sliding doors and interior lighting Various SK 40 tool holders Electronic handwheel Coolant system with high-performance pump Coolant pressure: 20 bar Chip conveyor Operating manual

Condition: ready for operation (used), Year of construction: 2001, Available for immediate pickup from our location: Vertical machining center, Bridgeport Type VMC 800 Year of manufacture: 2001 Spindle renewed in 2026 (€13,000) Heidenhain TNC 410 Table size: 1000 x 500 mm X/Y/Z travel: 800 / 500 / 500 mm Table load capacity: 750 kg SK 40 Iisdsz R Nt Espfx Anish 22-tool changer Spindle speeds up to 10,000 rpm Drive power: 11 kW Vises, chucks Weight: 4 tons Price: €9,000 plus VAT, ex works

Condition: used, Year of construction: 1997, functionality: fully functional, travel distance X-axis: 1,020 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 500 mm, feed rate X-axis: 40 m/min, feed rate Y-axis: 40 m/min, feed rate Z-axis: 25 m/min, controller manufacturer: HEIDENHAIN, controller model: TNC 426P, table width: 490 mm, table length: 1,150 mm, table load: 900 kg, spindle speed (max.): 10,000 rpm, spindle motor power: 19,000 W, spindle nose: BT 40, number of slots in tool magazine: 30, Equipment: chip conveyor, documentation/manual, CNC Heidenhain TNC 426P WORKING AREA: Longitudinal X: 1020 mm Transverse Y: 510 mm Vertical Z: 500 mm Rapid traverse rate for X, Y axes: 40 m/min Rapid traverse rate for Z axis: 25 m/min SPINDLE: Spindle power: 19 kW Maximum rotation speed: 10,000 rpm Spindle taper: BT 40 Ijdpjz Iadyjfx Anisih TABLE: Surface area: 1150 x 490 mm T-slots: 5 slots at 100 mm intervals Maximum load capacity: 900 kg TOOL CHANGER: Magazine positions: 30 Tool change time: 3.5 sec Maximum tool weight: 6 kg Maximum length: 250 mm Maximum diameter: 80 mm Machine complete with: • Chip conveyor • Operating manuals and CE declaration Year of manufacture: 1997

Condition: excellent (used), Year of construction: 1984, functionality: fully functional, travel distance X-axis: 760 mm, travel distance Y-axis: 370 mm, travel distance Z-axis: 335 mm, rapid traverse X-axis: 5 m/min, rapid traverse Y-axis: 5 m/min, table width: 420 mm, table length: 1,200 mm, spindle mount: MK 4, total height: 2,310 mm, total width: 1,900 mm, total length: 2,650 mm, type of input current: three-phase, rotational speed (max.): 4,000 rpm, rotational speed (min.): 40 rpm, workpiece weight (max.): 405 kg, quill travel distance: 150 mm, power: 6 kW (8.16 HP), Equipment: rotational speed infinitely variable, Type control: Heidenhein 150 System resolution: 0,001 mm Iisdpfxsunhy Ss Anijh Documentation for machine

Condition: used, Year of construction: 2005, functionality: fully functional, machine/vehicle number: 310B069, travel distance X-axis: 760 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 610 mm, controller model: Fanuc Series 18i-MB, overall weight: 6,500 kg, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 32, Equipment: chip conveyor, BRIDGEPORT XP3-760 - Manufacturer: Bridgeport - Model: XP3-760 / VMC 760 XP3 Iiodpfx Anjzvf Sujieh - Serial Number: 310B069 - Year: 2005 - Machine Type: CNC Vertical Machining Center - CNC Control: Fanuc Series 18i-MB - Number of Axes: 3 - X-Axis Travel: 760 mm - Y-Axis Travel: 610 mm - Z-Axis Travel: 610 mm - Table Size: Approx. 890 × 600 mm - Maximum Table Load: Approx. 907 kg - Spindle Speed: 12,000 rpm - Spindle Motor Power: 25 HP / approx. 18.6 kW - Spindle Taper: BT-40 - Automatic Tool Changer: 30 tools - Tool Change Time: Approx. 4 sec chip-to-chip - Rapid Traverse X/Y: Approx. 43 m/min - Rapid Traverse Z: Approx. 36 m/min - Spindle Nose to Table: Approx. 100–709 mm - Machine Dimensions: Approx. 3,940 × 2,340 × 2,340 mm - Machine Weight: Approx. 6,580 kg

Condition: good (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 540 mm, travel distance Z-axis: 540 mm, Manufacturer: Bridgeport / Hardinge Model: GX 600 Year of construction: 2008 Control system: Siemens 810D Machine type: CNC vertical machining center Axes: 3 (X, Y, Z) Travel distances: X-axis: 600 mm Y-axis: 540 mm Z-axis: 540 mm Distance from spindle nose to table: 145–685 mm Work table: Table dimensions: 750 × 540 mm Max. table load: 700 kg T-slots: 3 × 18 mm Main spindle: Spindle speed: 8,000 rpm Spindle power: approx. 15 kW Tool holder: SK40 Tool changer: Tool magazine: 20 positions Max. tool diameter: 94 mm Max. tool length: 250 mm Max. tool weight: 6 kg Tool change time: approx. 6 seconds Feed rates: Rapid traverse X/Y/Z: 36 m/min Max. working feed rate: 12,000 mm/min Accuracy: Positioning accuracy: 0.010 mm according to ISO 230-2 Machine data: Machine weight: approx. 5,260 kg Coolant tank: 230 liters Iijdpfsz Rz Igsx Anish Compressed air supply: approx. 5 bar

Condition: used, Year of construction: 1997, functionality: fully functional, spindle bore: 66 mm, spindle speed (max.): 4,500 rpm, travel distance X-axis: 185 mm, travel distance Z-axis: 540 mm, quill travel distance: 130 mm, quill diameter: 80 mm, BRIDGEPORT ROMI POWERPATH 15 - Manufacturer: Bridgeport / Romi - Model: PowerPath 15 - Year: 1997 - Machine Type: CNC Turning Center - CNC Control: Fanuc Series 21i – To be confirmed - Number of Axes: 2 - Chuck Size: Approx. 203 mm / 8" - Swing Over Bed: Approx. 440 mm - Maximum Turning Diameter: Approx. 280 mm Isdpfxszvf Dwo Anisih - Maximum Turning Length: Approx. 540 mm - X-Axis Travel: Approx. 185 mm - Z-Axis Travel: Approx. 540 mm - Spindle Bore: Approx. 66 mm - Bar Capacity: Approx. 51 mm - Spindle Nose: A2-6 - Spindle Speed: Up to 4,500 rpm - Spindle Speed Range 1: Approx. 15–1,500 rpm - Spindle Speed Range 2: Approx. 45–4,500 rpm - Spindle Motor Power: 15 HP / approx. 11.2 kW - Turret Capacity: 12 tools - Tailstock: Included / To be confirmed - Tailstock Quill Diameter: Approx. 80 mm - Tailstock Quill Travel: Approx. 130 mm - Chip Conveyor: Included

Condition: excellent (used), travel distance X-axis: 800 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 600 mm, feed rate X-axis: 20,000 m/min, feed rate Y-axis: 20,000 m/min, feed rate Z-axis: 20,000 m/min, controller manufacturer: Heidenhain TNC 426 PB, workpiece weight (max.): 750 kg, total height: 2,750 mm, total length: 4,000 mm, total width: 2,250 mm, table width: 490 mm, table length: 1,000 mm, table load: 750 kg, rotational speed (max.): 12,000 rpm, overall weight: 4,200 kg, spindle motor power: 13,000 W, number of slots in tool magazine: 30, Equipment: chip conveyor, 3-axis CNC machine (VMC) BRIDGEPORT - VMC 800 XP MACH-ID 9835 Make: BRIDGEPORT Type: VMC 800 XP Control: Heidenhain TNC 426 PB X - Travel: 800mm Y - Travel: 510mm Z - Travel: 600mm Table Length: 1000mm Table Width: 490mm Table load: 750 Iodpfx Ajz Nw Igenijih Feed rate X-Axis: 20000mm/min. Feed rate Y-Axis: 20000mm/min. Feed rate Z-Axis: 20000mm/min. Spindle Taper: Sk40ISO/Bt/Mk Power on spindle: 13kW Speeds / ranges: 12000Rpm ATC / revolver: 30 Coolant through spindle / Bar:15 Number of controlled axis: 3 Chip conveyor: yes Coolantsystem: yes Length: 4000mm Width: 2250mm Height: 2750mm Weight: 4200kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: ready for operation (used), Year of construction: 2007, travel distance X-axis: 600 mm, travel distance Y-axis: 540 mm, travel distance Z-axis: 540 mm, controller manufacturer: SIEMENS, controller model: Sinumerik, table width: 540 mm, table length: 750 mm, spindle speed (max.): 8,000 rpm, spindle motor power: 15,000 W, This Bridgeport GX 600 Vertical Machining Center was built in 2007 in the United Kingdom. Equipped with a SIEMENS SINUMERIK Control unit, this machine can operate with a spindle speed up to 8000 rpm. Iedpfez D T Scox Anisih Machine Benefits Technical Machine Benefits • Spindle nose to table top: 145-685 mm

Condition: good (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: NVLA7K0128, travel distance X-axis: 480 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 330 mm, controller manufacturer: Fanuc, controller model: 0i-MC, total length: 1,575 mm, total width: 2,168 mm, table width: 400 mm, table length: 600 mm, overall weight: 3,000 kg, spindle speed (max.): 10,000 rpm, spindle motor power: 7,500 W, spindle nose: BT40, number of spindles: 1, number of slots in tool magazine: 16, Equipment: rotational speed infinitely variable, BRIDGEPORT HARDINGE GX480 Vertical Machining Centre. New 2007 With Coolant, Interlocked guards, Low Volt Light FANUC 0i-MC Control Machine Dimensions: 1575 x 2168 mm Machine Weight 3000 kg Iisdpfxexgqwdo Anijh Spindle Motor Power 7.5 kW Spindle Speed 10000 rpm Table Size 600 x 400 mm Tool Change Capacity 16 Station Tool Size BT40 Traverses XYZ 480 x 400 x 330 mm

Condition: good (used), Year of construction: 2011, XYZ: 760 x 610 x 610mm, Table 900 x 600mm, Iisdpfx Asz Rz Nqsnioh 21kW, Heidenhain TNC530, 12000 rpm, 30 station ATC, BT40 taper, swarf conveyor, through spindle coolant,

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: 0500071, SPECIFICATION Table Size 600 x 320mm X axis traverse 450mm Y axis traverse 350mm Z axis traverse 380mm Spindle BT40 Spindle Speeds 0-8000rpm Spindle Motor 10kW Rapid feed rates all axes 30m/min Iiodpfxotylazs Anijh Toolchanger capacity 12 Tools Toolchanger change time 8 Seconds Approximate Weight 2000Kg   Machine equipped with:- Siemens 810D Shopmill CNC Control Swarf auger Lighting Coolant system Enclosed guarding

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, table length: 1,200 mm, table width: 600 mm, spindle speed (max.): 12,000 rpm, table height: 560 mm, table load: 900 kg, Machine with just revised spindle, never used after Connected to power and available for inspections and tests Lubrication through spindle 30 Tools Ijdsrb Amlopfx Anijih Heidenhain 530

Condition: excellent (used), Year of construction: 1999, travel distance X-axis: 1,500 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 500 mm, total length: 5,179 mm, table length: 1,800 mm, table width: 650 mm, total width: 3,345 mm, rapid traverse X-axis: 28,000 m/min, rapid traverse Y-axis: 28,000 m/min, rapid traverse Z-axis: 28,000 m/min, table load: 1,500 kg, overall weight: 7,500 kg, X - Travel: 1500mm Y - Travel: 800mm Z - Travel: 500mm Table Length: 1800mm Table Width: 650mm Iijdpsyhph Eefx Anijh Table load: 1500 Feed rate X-Axis: 28000mm/min. Feed rate Y-Axis: 28000mm/min. Feed rate Z-Axis: 28000mm/min. Spindle Taper: 40ISO/Bt/Mk Power on spindle: 13.5kW Speeds / ranges: 8000Rpm ATC / revolver: 24 Coolant through spindle / Bar:10 Number of controlled axis: 3 Chip conveyor: yes Coolantsystem: yes Length: 5179mm Width: 3345mm Height: 2595mm Weight: 7500kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Year of construction: 2008, Travels X/Y/Z: 1020mm/610mm/610mm, table dimensions X/Y: 1300mm/600mm, max. table load: 900kg, spindle taper: SK40, spindle speed: 12000rpm, tool positions: 30, control: Heidenhain iTNC 530, machine operating hours: 27500h, spindle operating hours: 12700h. Including 3D touch probe, through-spindle coolant at 20bar, additional external air cooling and scraper belt chip conveyor. The machine was used in single-shift operation. Iisdpjz Nwckefx Anish

Condition: used, Year of construction: 2005, functionality: fully functional, Manufacturer: Hardinge / Bridgeport (USA / UK) Model: XP1000 Year of Manufacture: 2005 Reliable and efficient CNC vertical machining center designed for milling, drilling, and tapping a wide range of metal components. The Bridgeport XP series is renowned for its robust construction, high precision, and fast processing capabilities, making it ideal for both job shop and series production. Main technical specifications: (based on Hardinge Bridgeport XP1000 specification) Control: Heidenhain iTNC 530 Travel: X = 1020 mm / Y = 510 mm / Z = 635 mm Table size: 1200 × 520 mm Max. table load: 700 kg Spindle speed: up to 10,000 rpm Spindle taper: BT40 Tool changer: 20 positions (automatic) Iijdpsxqprujfx Anijh Spindle motor: 15 kW Machine weight: approx. 7,000 kg Power supply: 400 V / 50 Hz Cooling system: integrated Application: The Hardinge Bridgeport XP1000 is designed for precision metalworking—milling, drilling, tapping, and contour machining. Ideally suited for: - Tool, mold, and component manufacturing - Automotive, equipment, and industrial sectors - Situations requiring accuracy, reliability, and consistent performance If you have any further questions, we will be happy to assist you.

Condition: like new (used), Year of construction: 2021, Traverses X Y Z: 710 x 400 x 430mm, Table 800 x 400mm, table load 300kgs, Spindle speed 12,000rpm, Spindle taper CAT40, 5.5kW Spindle motor, FANUC Oi , Isdpfeyt E Uxex Anioih 20 Station ATC, Coolant, Low Volt light, swarf conveyor

Condition: ready for operation (used), Year of construction: 1992, A Bridgeport CNC vertical machining center is available. Travel X/Y/Z: 1020mm/510mm/500mm, rapid traverse: 40m/min, feed rate: 10m/min, table dimensions X/Y: 1150mm/490mm, max. table load: 900kg, tool holder: BT40, tool stations: 30, machine dimensions X/Y/Z: approx. 2700mm/2550mm/2450mm, weight: approx. 3800kg. Documentation vorhanden. An on-site inspection is possible. Ijdpfxeyw Sv So Anijih

Condition: ready for operation (used), Year of construction: 2003, travel distance X-axis: 1,000 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 500 mm, controller manufacturer: HEIDENHAIN, controller model: 426, spindle speed (max.): 6,000 rpm, number of axes: 4, This 4-axis Bridgeport VMC 1000/30 was manufactured in 2003. It features an X-axis travel of 1000 mm, Y-axis travel of 300 mm, and Z-axis travel of 500 mm. The machine is equipped with a 30-tool magazine and a BT40 spindle holder, ensuring efficient operation. If you are looking to get high-quality machining capabilities, consider the Bridgeport VMC 1000/30 vertical machining centre we have for sale. Contact us for further details. • Tool taper: BT40 Iedjzkh I Uopfx Anieih • Number of tool slots: 30 • Chip conveyor: Complete with Chip Conveyor

Condition: ready for operation (used), Year of construction: 2003, travel distance X-axis: 1,000 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 500 mm, controller manufacturer: HEIDENHAIN, controller model: 530, spindle speed (max.): 10,000 rpm, number of slots in tool magazine: 30, number of axes: 4, This 4-axis Bridgeport VMC 1000 was manufactured in 2003. It features an X-axis travel of 1,000 mm, Y-axis travel of 300 mm, and Z-axis travel of 500 mm. The machine is equipped with a HEIDENHAIN 530 control unit, a BT40 spindle holder, and a tool magazine capacity of 30 positions. If you are looking to get high-quality machining capabilities, consider the Bridgeport VMC 1000 vertical machining center we have for sale. Contact us for further details. Additional equipment Iiodozfqacjpfx Anish • Chip conveyor Technical Specification Taper Size BT 40

Condition: ready for operation (used), Year of construction: 2004, travel distance X-axis: 800 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 500 mm, controller manufacturer: HEIDENHAIN, controller model: 530, spindle speed (max.): 6,000 rpm, number of slots in tool magazine: 30, number of axes: 4, This 4-axis Bridgeport VCM 800-30 was manufactured in 2004. It features an X-axis travel of 800 mm, Y-axis travel of 300 mm, and Z-axis travel of 500 mm. The machine is equipped with a NIKKEN 4th Axis Rotary Table and a HEIDENHAIN 530 Control, along with a BT40 Spindle Holder and 30 tool positions. If you are looking to get high-quality machining capabilities, consider the Bridgeport VCM 800-30 vertical machining centre we have for sale. Contact us for further details. • NIKKEN 4th axis rotary table Technical Specification Iedpfx Anjzf Nl Doisih Taper Size BT 40

Condition: used, Year of construction: 2005, CNC Machining Center HARDINGE BRIDGEPORT XP610 (Year 2005) Condition: Good, technically sound. Manufacturer: Hardinge / Bridgeport (USA / UK) Iodpexqp Enefx Anieih Model: XP610 Year of manufacture: 2005 A compact and reliable CNC vertical machining center designed for precise milling, drilling, and tapping of metal parts. The Bridgeport XP series is known for its high accuracy, robust construction, and reliable control system, making it an excellent solution for manufacturing processes where precision and repeatability are crucial. Main technical specifications: (according to Hardinge Bridgeport XP610 model specifications) Control system: Heidenhain iTNC 530 Travel (X / Y / Z): 610 × 510 × 510 mm Table size: 800 × 520 mm Max. table load: 500 kg Spindle speed: up to 10,000 rpm Spindle taper: BT40 Tool changer: 20 positions (automatic) Spindle motor: 11–15 kW Cooling: integrated coolant system Power supply: 400 V / 50 Hz Machine weight: approx. 6,000 kg Application: The Hardinge Bridgeport XP610 is designed for precision machining of components and parts: - Metal, aluminum, copper, and brass workpieces - Tool and die manufacturing - Production of mechanical components and industrial parts Suitable for both small batch and series production where a precise, stable, and repeatable result is required. If you have any further questions, please feel free to contact us.

Condition: ready for operation (used), Year of construction: 2000, travel distance X-axis: 800 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 500 mm, controller manufacturer: HEIDENHAIN, controller model: 426, spindle speed (max.): 10,000 rpm, number of slots in tool magazine: 30, number of axes: 5, This 5-axis Bridgeport VMC 800/30 was manufactured in 2000. It features an X-axis travel of 800 mm, Y-axis travel of 300 mm, and Z-axis travel of 500 mm. The machine is equipped with a HEIDENHAIN 426 control and offers 30 tool positions, along with a BT40 spindle holder. If you are looking to get high-quality machining capabilities, consider the Bridgeport VMC 800/30 vertical machining centre we have for sale. Contact us for further details. Ijdpfx Aozf Nh Eonijih • 4th and 5th axis interface for Jones & Shipman rotary table (interface only; rotary table not specified) Technical Specification Taper Size BT 40