Used Harding Bridge Port for sale (7,101)

Condition: used, Hard stone slab, granite slab, granite block, measuring cube Hard stone block, angle block precisely machined on all sides The granite slab comes from a measuring machine Dimensions of the large table surface L x W x H: 1350 x 1000 x 300 mm Dimensions of the small table surface L x W: x H: 1350 x 300 x 245 mm - 5 support blocks with leveling screws approx. 400 mm - 8 threaded bushes in the table surface with M10 (hole spacing 500 x 250 x 250 x 250 mm) - 4 threaded bushes M16 - Small chipping on one edge of the top Overall dimensions L x W x H: 1350 x 1350 x 300 mm Weight of measuring plate: 1500 kg Weight of granite feet: 100 kg very good condition Lsdpfxsh Uhq Do Akfjrk

Condition: used, Hard stone plate, granite plate, granite block Hard stone block, angle block precisely machined on all sides Lredjg Uar Dopfx Akfek Measuring cube, measuring plate Length: 1590 mm Width: 300 mm Height: 470 mm - 2 drillings Ø 80 mm - 2 drillings Ø 120 mm - Threaded inserts mainly M16, some with M12 and M18 Net weight: 570 kg Good condition

Condition: used, Crane motor, travel drive crane bridge drive with gearbox Sliding anchor motor, sliding anchor motor, three-phase electric motor, brake motor, crane motor, cable drive, crane drive, hoist motor, fine hoist motor Manufacturer: DEMAG Motor type: 24/10 KF8-2 Motor No.: 982869 Motor type: B5 Rated voltage: 380 VAC Rated frequency: 50 Hz Power stage 1: 0,58 kW = 715 rpm. Power stage 2: 2,3 kW = 2900 rpm. with gearbox DEMAG type KS 12 Reduction gearbox fabric. no. 1909104 gear ratio: i = 118 with impeller for crane rail Lrjdpfjptlblex Akfsk 2 pieces available, price per piece

Condition: new, Year of construction: 2025, COMPLETE LINE FOR HARD COVER BOOKS including; 1. SEMIAUTOMATIC CASEMAKER MACHINE MAGRAF KO-50x70 PLUS 2. CASING-IN MACHINE MAGRAF UK-46 3.PRESSING AND JOINT FORMING MACHINE MAGRAF PK-50x40 PLUS 4.HEAD BENDING MACHINE MAGRAF KV-10 5.CORNERING MACHINE MAGRAF ZA-10 6.ENDPAPER GLUING MACHINE MAGRAF FO-32 All machines are new,produced in Croatia Lrodpfx Akjdv Ea Ijfjk For other information please contact us MAGRAF

Condition: excellent (used), functionality: fully functional, Year of construction: 1998, load capacity: 2,850 kg, For sale is a hall crane system by Konecranes (Trost & Hilterhaus). The system is in good condition and has been serviced regularly. TECHNICAL DETAILS - Load capacity: 2,850 kg - Model: Konecranes CXT 300 - Year of manufacture: 1998 - Span: approx. 11.2 m (as per system planning) - Crane runway: Suitable runway girders (profiles IPE 300 / IPE 200) included MACHINE DETAILS - Manufacturer: Trost & Hilterhaus GmbH / Konecranes - Project number: 15513/98 - Components: Complete bridge including end carriages and electric wire rope hoist - Electrical data: Control voltage 48 V EQUIPMENT - Radio remote control including charging station - Control cabinet (fully equipped with Schneider/Telemecanique components) - Documentation / structural analysis available - Paintwork: RAL 3000 (flame red) / bridge - No runway rails included; up to 50m can be offered additionally if required Transport and loading can be organized Europe-wide for an additional charge upon request. Lredpfxjykbd Do Akfek All prices are subject to VAT. Inspection possible by appointment. Please contact us – our team looks forward to assisting you. Trade-in or exchange possible! Machinery Purchase / Sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your production? Or do you want to sell yours? For further information or contact details, please visit our website.

Condition: excellent (used), functionality: fully functional, Year of construction: 2000, load capacity: 2,500 kg, For sale are two overhead crane systems by Konecranes. The systems are in excellent condition and have been regularly serviced. Technical Data: - Span: 18.6 m - Crane lifting capacity: 2,500 kg - Lifting height: 3.79 m Lredpfx Aksykbbisfok - Year of manufacture: 2000 and 2006 - Lifting speed: 5.0 / 0.83 m/min (2-speed) - Trolley travel speed: 20 m/min (infinitely variable) - Crane travel speed: 25 m/min (infinitely variable) - Runway length: 18 m MACHINE DETAILS: - Trolley weight: 211 kg - Crane weight without trolley: 1,761 kg - Rails: only 50 m available in total for both systems EQUIPMENT: - Radio remote control with push-button/master switch - Mobile pendant as emergency control - Overload protection and load data logger - Limit switches for crane and trolley travel (approach and end limits) - Signal horn, charging station, and spare battery - Main conductor line (make: Akapp, 50A, length: 18 m) - Includes main switch and mounting brackets (clamped version) The offer is made for one system only, unless a combined offer for both is explicitly requested. Transport and loading can be organized at an additional cost. Europe-wide delivery available. Prices are subject to VAT. Inspection possible by appointment. Please contact us—our team is happy to assist you. Trade-in or exchange possible! Machinery Purchase / Sale BUYING / SELLING OF PRODUCTION & METALWORKING MACHINERY AND MORE. Are you looking for a high-quality, yet affordable metalworking machine for your production? Or are you looking to sell yours? For further information or contact options, please visit our website.

Condition: good (used), Autonomous lifting crane 15 tons Brand (CATERPILLAR) Perkins engine Lrodpfx Akoh Su Iaofjk The machine works very well Includes in the price : dismantling and loading on truck

Year of construction: 1982, condition: used, Technical details: z-travel: 260 mm pressure capacity max.: 49 - 7355 (Prüflast) N checking height: 260 mm Lsdpfx Aou N Avxekferk workpiece weight: max. 160 kg throat: 200 mm interface: RS 232 voltage: 230V / 50Hz V total power requirement: 200 VA machine weight approx.: 250 (ohne Unterschrank) kg dimension machine xH: 0,7x 0,6 x 1,8 (mit Unterschrank) m The hardness tester with depth measurement operating mode is on sale with a base cabinet from Emco for hardness testers. The device is suitable for testing the following methods(Specifications according to manufacturer): Metals according to Brinell, Vickers, Rockwell Plastics testing according to DIN 53 456 Other materials for testing only after consultation with the manufacturer. Test loads: electronically controlled via microprocessor, DMC and DC motor for M4R-075 = 49 to 7355 N Test table height adjustable via handwheel; Ø 90mm Test bench mounting according to DIN 51 225 = Ø 25mm Operation and programming via control panel accessories: a few test tables and plates (comparable with the pictures) *

Condition: used, Year of construction: 1995, weight max. 5 t stroke 7000 mm clamping width 10000 mm weight of the machine ca. 3220 kg 41 Factory No. 18/703395 Test log available. The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale Lrjdpsyutvmefx Akfsk apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, Year of construction: 1992, Technical details: lifting capacity : 2,0 t lifting height max. hook position: 2,3 m travel of hook: max. 3000 mm wheel base: 520 mm total power requirement: 2,3 kW Crane with carrier and electric rails: -double - T - beam 200 x 200mm, length approx. 10.100mm, travel 9.000,00 mm -Steel lifting gear, load capacity 2000kg, lifting class DIN 15018, lifting speed 0.80 / 5 m/min, lifting height 3 m, travel speed 10 / 2.5 m/min, track 200mm, axle distance 520mm, Chain hoist, hook Lrodpfeu Nvgdex Akfjk -Pendant control panel Pendant station -div. mounting holes *

Condition: ready for operation (used), CV Instruments THR-700E Hardness Tester Rockwell Digital Hardness Tester Test Force: 98.07 N (10 kgf) Test Force/Load: 588.4 N (60 kgf), 980.7 N (100 kgf), 1471 N (150 kgf) Maximum Height: 170 mm Maximum Depth: 165 mm Dimensions: approx. 215 mm x 500 mm x 750 mm (W x D x H) Weight: approx. 85 kg You are welcome to arrange an inspection. Lodpfx Akjytn Hkefjrk We can also organize a cost-effective shipping solution for you! You will receive a proper invoice. For international customers, a net invoice can be issued, provided a valid VAT ID number is supplied. Subject to prior sale. Visit our shop to see more of our offerings. Brand names and trademarks mentioned are the property of their respective owners and are used for identification and description purposes only. Deviations from technical specifications and errors in the article description are possible and subject to change.

Year of construction: 2001, condition: used, Hard cover book line VBF / Muller Martini Diamant Year: 2001 Description: - Semi automatic setting - Book measuring table - Stand-alone pre-heating device: IR - Infeed conveyor - Starfeeder - Rounding and backing station - Glue unit - Gauzing station - Book mark suction device - Glue unit - Head and tail banding station - Pressing station - Casing-in station - Case infeed device - Case pre-stacking conveyor - Case bending station - Case forming station - Coldglue circulation pump - Hotmelt nozzle glue system for joint gluing in casing-in section Building in machine VBF / Muller Martini EP 680 L Year: 2000 Description: - Book forming station - Delivery - Delivery to the left Book stacker VBF / Muller Martini BLSD 600 D Year: 2001 Lrjdpfx Akjyid Nwjfek Book block format (max): 380 x 270 x 80 mm (hxwxt) Book block format (min): 100 x 100 x 4 mm (hxwxt) Size range opened case (max): 660 x 390 mm Size range opened case (min): 190 x 105 mm Max. mechanical speed: 3.600 cycles / hour Note!: Specifications are subject to typographical errors and changes in comparable models by the manufacturer!

Condition: used, overall weight: 41,000 kg, axle configuration: 3 axles, first registration: 07/2021, Equipment: ABS, Kögel Port 45 BDF Multi Chassis, Lift Axle, max. 41,000 kg Internal reference number for inquiries: 0326215 * Permissible total weight: 41,000 kg * General condition: very good * ABS * 3 axles, air suspension * BPW axles * Drum brakes * Multi chassis Tyres: * 1st axle: 385/55 R22.5 35% air suspension * 2nd axle: 385/55 R22.5 55% air suspension * 3rd axle: 385/55 R22.5 35% air suspension ----Price: 15,900 EUR + 19% VAT For further questions, you can reach us at the following phone numbers: Lrjdpfx Asyrvutokfok We speak: German, English, Polish, French and ???? Subject to errors, omissions, and prior sale.

Year of construction: 1996, condition: used, Hard cover book line Consisting of: Kolbus BF 525 - FE 603 - DS 391 Year: 1996 - 2000 - 2002 Hard cover book line Kolbus BF 525 + FE 603 Year: 1996 - 2002 Description: - Automatic setting - Co-Pilot with touchscreen - Book measuring table - Starfeeder - Pre-heater (hot air) - Rounding and backing station - Glue unit - Gauzing station - Book mark suction device - Glue unit - Head and tail banding station - Pressing station - Casing-in station - Case pre-stacking conveyor - Case bending station - Case forming station - Coldglue circulation pump Building in machine Kolbus FE 603 Year: 2000 Lrjdpfx Aevw Al Eokfjk Description: - Pressing station - Right hand infeed - Integrated hydraulic - Straight delivery Book stacker Kolbus DS 391 Year: 2002 - Turning device - Delivery in reverse direction - Straight delivery Book production line: Compact 2000 SC Size range opened case (max): 660 x 385 mm Size range opened case (min): 210 x 125 mm Book block format (max): 270 x 375 x 80 mm Book block format (min): 100 x 125 x 4 mm Max. mechanical speed: 50 cycles/min -: - Book forming and pressing machine: FE 603 Product size (max): 315 x 385 x 90 mm Product size (min): 70 x 100 x 6 mm Max. mechanical speed: Up to 62 cycles/min Note!: Specifications are subject to typographical errors and changes in comparable models by the manufacturer!

Year of construction: 1979, condition: good (used), Overhead Crane DEMAG Type: EKKE Year 1979 Lodpoh Uqbfefx Akferk Lifting capacity 7500Kg. span width : 7500mm Hook height : 5500mm Complete with traction motors and hoisting gear from DEMAG Crane documentation and test book reports, plans available with 20 meter power rail included.

Condition: used, Stationary hardness testing machine Hardness tester The hardness tester can be used manually with a template. The device is compatible with software, for data protection reasons the hard disk with software has been removed. Device is sold without software. Retrofit hardness tester Briviskop BL 3: HMEWin-Compact consisting of : 3.900,00 € -Pc with integrated touch screen -HMEWin-Touch Basis software - Hub with 12-pin connection for measuring system -Complete support system for the machine stand. Lrodpfx Aorfwynekfsk Working time for retrofitting, commissioning, € 1,100.00 Calibration and instruction of employees approx. For more technical data, see type plate. You are welcome to come by for a viewing. You will receive a proper invoice. A net invoice can also be issued for foreign customers. Prerequisite is a valid VAT number. Subject to prior sale. Visit our store and have a look at our other offers. Company names and trademarks are the property of their owners and are used only to identify and describe the products. Deviations from technical data and errors in the description of the article may occur and are reserved.

Condition: used, Year of construction: 1992, functionality: fully functional, Hard stone angle from Johannes Fischer Aschaffenburg in laboratory quality, 350x300x60mm Perpendicularity < 2µm (1") Flatness of the measuring surfaces < 1µm Slightly damaged corners, measuring surfaces are in order Lrjdpfx Akjq Tdh Eofek Measurement report on request for an additional charge

Condition: excellent (used), functionality: fully functional, Year of construction: 2004, overall weight: 3,100 kg, total width: 10,600 mm, load capacity: 8,000 kg, working height: 9,000 mm, GZUT/SWF bridge crane 8t, 10.4m, emag: 9m in excellent condition for sale Manufacturer: GZTU Type: LNE Year of manufacture: 2004 Lifting capacity: 8t Span (cone crown distance): 10.4 m Total width: 10.6m Bridge running gear speed: 20 m/min Lifting speed: 5 / 0.83 m/min (two-stage) 400 V / 50 Hz Dead weight: 3.1t Noise level: Lm(A) ≤ 85 dB(A) Ljdpfx Akjx Dk A Ijferk With wireless remote control, documentation. Additional information, exact dimensions can be found in the pictures.

Condition: excellent (used), functionality: fully functional, Year of construction: 2005, overall weight: 8,000 kg, total length: 16,300 mm, load capacity: 12,500 kg, Manufacturer: STAHL Crane Komép bau " Completely renovated in 2011" Lodpsxtmhlefx Akfork Span: 16.3m Lifting height: 10m Load capacity: 12.5t Modernized, wired remote control system, new STAHL 12.5t trolley

Year of construction: 1998, operating hours: 5,400 h, condition: good (used), functionality: fully functional, Sawblade –Ø: 500 - 1000 mm Cutting lenghts for saw blade – Ø 500 mm = 3400 mm Saw motor output: 18,5 KW 400 Volt, 50 Hz. Standard rot. speed: 1.000 / 1.450 U/min. Lrodpfjym Nzpex Akfok Support: electrical vertical adjustment of saw blade; stroke ca. 550 mm Support: electrically swivelling from 0°- 48°. Control: Electronic sequence - cutting control Automatic program: for soft and hard stones Operator panel : swiveling Folding bellows cover Bridge and cross guides Machine rotary table Size: 3400 x 1500 x 800 mm Table can be rotated manually through 360°, with fixed locking at 90° intervals, or individually in any position. Side stops can be folded down manually

Year of construction: 1993, condition: good (used), functionality: fully functional, Sawblade –Ø: 500 - 900 mm Cutting lenghts for saw blade – Ø 500 mm = 3400 mm Saw motor output: 18,5 KW 400 Volt, 50 Hz. Standard rot. speed: 1400 U/min. Support: electrical vertical adjustment of saw blade; stroke ca. 550 mm Support: electrically swivelling from 0°- 48°. Control: Electronic sequence - cutting control Automatic program: for soft and hard stones Operator panel : swiveling Electrically height-adjustable protective cover Machine-turntable-sizes: 3400 x 1500 (1800) x 800 mm Machine turntable: electrically rotatable by 360° Side stops can be folded manually Ledpoym Nv Hsfx Akfsrk Table equipped with pneumatic UP and DOWN movable rollers on all sides

Operating hours: 13,373 h, condition: used, functionality: limited functionality, main saw diameter: 500 mm, table length: 1,500 mm, table width: 3,200 mm, machine/vehicle number: 2964, Spielvogel bridge saw with fully rotatable table. Saw: - Cutting length: 3300 mm - Rail length: 3500 mm - Max. saw blade diameter: up to 600 mm - Height adjustment: 500 mm Lredpjx Thr Uefx Akfok Table: - 360° rotatable and lockable (hydraulically with hand pump), stops adjustable every 90°. - Table equipped with pneumatic rollers or omnidirectional rollers (see photos). - Table dimensions with boards: 3000 x 2000 mm. All documents are still available.

Condition: used, MUNK Günzburger Steigtechnik 303406 Aluminum access ladder machine crossing with platform (bridge) 1900-750-2500 RA2414 Technical data: Manufacturer: Munk Günzburger Steigtechnik Type: machine crossing with pedestal Condition: very good (used) Total size: 1900-750-2500 mm (WxDxH incl. handrail) step dimensions: 85 x 600 x 45 mm step/tread height: 230 mm Lrsdpfxswpymie Akfjk platform dimensions: 800 x 650 mm Platform height: 1350 mm bottom edge 1420 top edge Steps: 6 (5 steps + platform on each side) Maximum working height: 3450 mm maximum load: 150 kg Weight: 38 kg Price plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Year of construction: 2010, The solution has been developed for the production of prefabricated exterior wall panels intended for house manufacturers. The system consists of three main components: one rail-mounted nailing bridge and two worktables. Nailing Bridge: The nailing bridge is designed for automated panel nailing using four nail guns interconnected with the corresponding opposite side. The system includes four nailing units which automatically perform nailing operations according to predefined nailing patterns at the respective worktables. The nailing portal is mounted on a floor-installed rail system bolted to the concrete floor, allowing the bridge-type nailing system to move between the two worktables as required. The system is equipped with photocells for positioning and safety control. Function • The rail-mounted frame is positioned in a neutral loading position between the two worktables. • The nailing operation is initiated from either of the two worktables. Lodpfxsykqxdj Akfork • The selected nailing pattern is executed automatically. • The nailing portal is activated to carry out the nailing process in accordance with the chosen pattern. Worktables: The worktables are designed with support grooves for positioning timber studs. These grooves are adjustable via sliding mechanisms, enabling adaptation to different panel types and configurations. Function • The outer edges of the table are adjusted towards the panel using a manual control. • The selected battens are manually positioned to provide support for accurate panel placement. • The operator positions the components to be assembled into the appropriate grooves and against the battens. • The bridge-mounted nailing system is activated to perform nailing according to the selected pattern.

Condition: good (used), Industrial Ethernet Switch, Network Switch, Lan Switch -Manufacturer: Siemens, Ethernet Switch Scalance XB008 8-port -Type: 6GK5008-0BA10-1AB2 Lodpfx Aox Tzh Nskferk -Dimensions: 110/45/H85 mm -Weight: 0.2 kg