Used Harding Bridge Port for sale (7,065)

Condition: good (used), Air cooler, evaporator, cold room, industrial cooler, cooling unit, cooler, water cooler, cooling system, refrigeration, cold storage, refrigerated container, cold room, heat exchanger, jet stream, cooling fan -Manufacturer: Port-A-Cool, mobile cooling fan type PAC2K36HP220-50 -Fan: Diameter: 36" / 914 mm Speed adjustable -Operating pressure: max. 3.45 bar -Voltage: 230V 50Hz / 5.5A -Dimensions: 1575/820/H1590 mm Pgsdpjrxgwbefx Akfok -Weight: 112 kg with pallet

Condition: excellent (used), Year of construction: 1999, Yang Eagle SMV 1000 Year of manufacture: 1999 Control: - Fanuc OM - Electronic handwheel Main spindle: - max. 6000 rpm Tool changer: - 20 magazine slots Travel paths: - X-1020, Y-510, Z-510 mm Table: Pedoyz R Ubopfx Akfsgk - Clamping surface 1070 x 500 mm - Chip conveyor Availability: - Immediately or by arrangement

Condition: used, Year of construction: 2011, 1 unit overhead crane STOCKER 1.2/2x05 Load capacity: 2x 250 kg, length approx. 6 m, crane has already been dismantled, placed on a pallet Colour: as shown, according to photos and inspection Year of manufacture: 2011 Pgsdpfxsy D Nc Ao Akfsk Condition: used Storage location: outdoor area Payment method: advance payment by bank transfer Shipping: collection only from location in Ditzingen-Heimerdingen

Condition: excellent (used), functionality: fully functional, Year of construction: 2020, load capacity: 6,300 kg, For sale is a nearly new overhead crane system from Konecranes. The crane is the CXTS model (single-girder bridge crane / profile girder) and is in excellent condition. ATTENTION: The crane shown in the listing photos has already been sold. However, an identical model is still available, but will not be ready for delivery until the end of 2026. TECHNICAL DETAILS - Capacity: 6,300 kg - Span: 18,600 mm - Lifting height: 6.00 m Podpfx Asykbimokfjgk - Year of manufacture: 2020 - Lifting speed: 4.0 / 0.7 m/min (2-speed) - Trolley travel speed: 20.0 m/min (stepless) - Crane travel speed: 32.0 m/min (stepless) MACHINE DETAILS - Weights: Trolley weight: 440 kg; Crane weight without trolley: 1,832 kg - Classification: Crane Class: S3 (DIN 15018); Hoist mechanism group: FEM 2m (ISO M5), Crane drive group: FEM 1Am (ISO M4) - Electrical data: Power supply: 400 V / 48 V / 50 Hz, Rated power: 4.9 kW EQUIPMENT - Radio remote control with push-button transmitter - Additional mobile pendant control (emergency control) - Overload protection and load data memory - Pre-limit and end-limit switches for crane and trolley travel - Signal horn, charging station, and spare battery - Hook collision protection Transport dimensions of the bridge: - Total length: 19,328 mm - Profile height of girder: 622 mm - End carriage width (wheel base): 2,200 mm Transport and loading can be organised across Europe at additional cost if required. Prices excl. VAT Inspection by prior appointment possible. Please contact us—our team will be happy to assist you. Trade-in or exchange possible! Machinery Trading - Purchase/Sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES, AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your production? Or are you looking to sell your own? For more information or to contact us, please visit our website.

Condition: excellent (used), Year of construction: 1995, machine/vehicle number: 47070001, For separating and separating light and impurities Drum diameter x width: 1,400 x 1,200 mm Vibrating feeder Blower with V = 7,000 m³/h incl. steel construction, platform, railings, etc. Pjdpfjqi Eh Hjx Akfjgk

Condition: ready for operation (used), Bridge Crane 5t, Demag Bridge Crane 5t, Crane 5t, Used Machine Manufacturer: Demag Overall dimensions: 10,700 x 3,000 mm Electrical data: 400 V; 50 Hz, total current = 18 Amps Hoisting unit: Demag P35 Load capacity: 5,000 kg / 5t Rope length / lifting height: 8 m Pgjdpfx Akewd Hhcofjk - Wired remote control - Crane travel motor refurbished - Trolley motor refurbished

Condition: good (used), Manufacturer: WMW WPM Material Testing Machines Leipzig Year of manufacture: Model: Test method: Table diameter: 200 mm Support diameter: 100 mm Throat depth: mm Test height: 300 mm Spindle diameter: 50 mm Test force: 15.5 to 250 kg Psdsy Hka Ujpfx Akfogk Accessories: Weight: 130 kg Footprint: 500 x 200 mm Dimensions: 500 x 300 x 730 mm Condition: good

Condition: good (used), Year of construction: 1993, Overhead crane, crane, trolley, crane running gear, crane travel gear, girder travel gear, head girder for bridge cranes, ceiling crane head girder, head girder for single-girder bridge crane, crane runway girder -Manufacturer: Demag, 1 set of end girders for single girder bridge crane Pgjdpfx Aeyzw Iuekfsk Type: ELV -Carrying rollers: Ø 160 mm -Hole spacing: 290 mm Ø 20 mm / Dimensions see photos -Transport dimensions: 2355/365/H245 mm -Weight: 302 kg

Condition: new, functionality: fully functional, fuel type: hybrid, color: blue, overall weight: 2,900 kg, empty load weight: 2,900 kg, operation weight: 2,900 kg, lifting power: 2,980 kg/m, tire condition: 100 %, Year of construction: 2024, operating hours: 1 h, Equipment: adjustable boom, crane, hydraulics, low noise, onboard computer, rubber tracks, 🔧 Key Specifications: • Year: 2024 • Operating hours: 1 h (NEW) • Max capacity: 2,980 kg (main boom) / 1,000 kg (with jib) • Max lifting height: 16.95 m (with jib) / 12.0 m (main boom) • Max working radius: 14.3 m • Power: Bi-energy (diesel + electric + battery) • Remote control: Fully proportional radio control • Hydraulic winch: Yes • Jib: Hydraulic telescopic jib included • Undercarriage: Variable crawler gauge • Outriggers: Automatic multi-position outriggers • Tracks: Rubber tracks (non-marking) • Weight: approx. 2,900 kg • CE certification: Yes ✨ Highlights: ✅ Bi-energy spider crane (diesel + electric operation) ✅ Suitable for indoor & zero-emission working Pgsdpfx Akey Hqhrjfsk ✅ Fully proportional remote control ✅ Hydraulic winch for precise lifting operations ✅ Hydraulic telescopic jib for extended reach ✅ Variable crawler gauge for maximum stability ✅ Automatic multi-position outriggers ✅ Compact design for confined spaces ✅ Ready for immediate deployment ⚙️ Condition: New machine — never used. Factory-new condition with full inspection and CE certification. 🌍 Location & Price: 📍 Sittard, Netherlands 🚚 Worldwide delivery available 💰 Price: €119,500 (EXW / excl. VAT) 🚚 Delivery: • Crane loading available • Flexible transport options • Handled by Collé Rental & Sales logistics

Year of construction: 2005, condition: ready for operation (used), A Makat depositing and cooling line for hard candies is available. Working width: 530mm, mold cavity arrangement: 2 rows, cavities per row: 19, total cavities per mold: 38, max. stroke rate: 25/min, production capacity 4.5g: approx. 400kg/h, product weight: 2.5g/4.5g, total line dimensions X/Y/Z: approx. 10500mm/1500mm/2300mm. Documentation available. An on-site inspection is possible. Pedjy Equmopfx Akfogk

Condition: excellent (used), Year of construction: 2019, Ref: 10959 . 2019 DGR RHLE 30 Book Line Fully automated, compact, automatic casing-in line for short-run hard cover book production. Excellent condition, only 375,000 books made! Pgjdpfxjy Avl Ij Akfok Features: * Very short make-ready times (no need to change format parts!) * Automatic motorised format change (optional) * Simple operation by a single operator *Superior industrial book quality *Small footprint *Offline or inline operation possible *Special single copy option for individual books * Designed for books with rounded or square spines Equipped with: Book block feeder Pre-heating section for hot-melt bound books Rounding & backing station (adjustable, no size change parts req.) Back lining & Headbanding station (with hot-melt or PVA glue) Flexible case magazine for plastic or hardcover cases Case preheating & forming unit (adjustable to the spine radius) Casing-in station with PVA gluing (adjustable film thickness) Hot-melt joint gluing station with pre-melter Transfer to; FE33 Pressing & joint forming machine Cooling, drying conveyor. Specification: Mech. speed, Max: 1200 cycles/h Format range (W x H) Max: 300mm x 300mm / Min: 100mm x 120mm Book block thickness, Max: 60mm / Min: 8mm (opt. 4mm) Dimensions: ca. 5000mm x 4000mm

Condition: good (used), Robust universal hardness tester suitable for Rockwell, Vickers, and Brinell measurements. Sturdy machine stand designed for rugged everyday use. Psdpfjwg R Thex Akfegk Measuring systems: - Measuring head with ground glass - Rockwell with dial Test height 300 mm Test depth 150 mm Hardness tester dimensions L x W x H 610 x 350 x 940 mm, without base frame Machine weight approx. 260 kg

Condition: good (used), Year of construction: 2014, Manufacturer: DEMAG Load capacity: 860 kg + 630 kg (equipped with two cranes) Exact technical dimensions are shown in the pictures. The crane runway can be extended using the structures and supports shown in the pictures; however, additional track elements are required for the extension, which are not available!! Psdpfx Aeyu R Dzjkfjgk

Condition: excellent (used), UNLOADER (BRIDGE-FRAME) WITH DOUBLE STORAGE STATION Gantry (Portal) machine, belonging to the line (SOFIT code: W05025) Vacuum system (with its pump) N. 2 Vertical supporting columns of the top supporting beam N. 1 Horizontal top supporting beam (where the carriage slide on) N. 1 Motorized sliding carriage with horizontal metal arms N. 2 Horizontal metal arm with vacuum cups, adjustables N. 2 Out-side rollers way (on gound) to out-feed pile of panels from the Unloader N. 1 Out-side motorized rollers table (which brings panels to the Unloader) Separate electric and command panel Psdpfx Ajyywl Rskfjgk Electronic Programmer PLC MAGELIS Perimetral safety metal grids Working capacity (cycles/min) 15-18 (ca.) Min/Max panels thickness mm 10 - 60 (ca.) Min dimensions of the panels mm 210 x 230 (ca.) Max dimensions of the panels mm 1200 x 3200 (ca.) Total installed motor power Kw

Condition: excellent (used), LOADER (BRIDGE-FRAME) WITH DOUBLE PICK-UP STATION Gantry (Portal) machine, belonging to the line (SOFIT code: W05025) Vacuum system (with its pump) N. 2 Vertical supporting columns of the top supporting beam N. 1 Horizontal top supporting beam (where the carriage slide on) N. 1 Motorized sliding carriage with horizontal metal arms N. 2 Horizontal metal arms with vacuum cups, adjustables N. 2 Out-side rollers ways (on gound) to in-feed pile of panels to the Loader N. 1 Out-side motorized rollers table (which out-feed the panels from the Unloader) Separate electric and command panel Electronic Programmer PLC MAGELIS Perimetral safety metal grids Working capacity (cycles/min) 15-18 (ca.) Min/Max panels thickness mm 10 - 60 (ca.) Min dimensions of the panels mm 210 x 230 (ca.) Max dimensions of the panels mm 1200 x 3200 (ca.) Podoyywi Aspfx Akfjgk Total installed motor power Kw

Year of construction: 2004, condition: used, For rounding, backing and casing-in of book blocks in hard, flexible or plastic cases. Alternative gluing, backlining, and headbanding, depending on the equipment of the machine, is possible depending on configuration. Hard cover book line Pgjdpfsx Dkk Sex Akfek Kolbus BF 527 Year: 2004 - Automatic setting - Co-Pilot with touchscreen - Product counter - Book measuring table - Starfeeder - Pre-heater (hot air) - Rounding and backing station - Glue unit - Excluding gauzing station - Book mark suction device - Glue unit - Head and tail banding station - Pressing station - Casing-in station - Case pre-stacking conveyor - Case bending station - Case forming station - Coldglue circulation pump Building in machine Kolbus FE 604 - Co-Pilot with touchscreen - Automatic setting - Right hand infeed - Integrated hydraulic - Heater monitoring unit - Straight delivery Book stacker Kolbus DS 391 - Compensating stacker - Straight delivery Kolbus: BF 527 Book block format (max): 305 x 375 x 80 mm (WxHxT) Book block format (min): 100 x 100 x 2 mm (WxHxT) Size range opened case (max): 660 x 385 mm Size range opened case (min): 210 x 105 mm Max. mechanical speed: Up to 60 cycles/min Net production is subject to sizes, materials etc. Note!: Specifications are subject to typographical errors and changes in comparable models by the manufacturer!

Year of construction: 1997, condition: ready for operation (used), Overhead travelling crane (laufkrane) with 19 meter span, 2 units of 20 tons each and 3 units of 16 tons each, lifting height 10 meters. Pjdpfx Akjw S D Uuofegk

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1997, 2 units Figee overhead crane, 35 tons, with swiveling hook, span approx. 18.60 m, and one unit approx. 21 meters, lifting height 10 meters. Podpfjw S D Izjx Akfogk

Condition: good (used), Year of construction: 1979, functionality: fully functional, overall weight: 220 kg, A Reicherter hardness tester is for sale in good used condition, as shown in the photos. Technical specifications: Psdoy Dvbfspfx Akfogk • Manufacturer: Reicherter • Model: Briviskop BVR 187.5 H • Hardness tester for Brinell, Vickers, and Rockwell • Equipped with a digital display by Stiefelmayer • Many accessories: computer and monitor, numerous hardness test plates and test tables • Last calibration was in August 2025 • Weight: approx. 220 kg • Condition: Used, in working order Shipping costs via freight forwarder: approx. €120 International buyers are welcome! You will receive an invoice with VAT shown. Viewing/pickup is possible by appointment in 42855 Remscheid. Sale from location 42855 Remscheid, buyer loads. Subject to errors in technical data and prior sale.

Year of construction: 2021, operating hours: 10,000 h, condition: excellent (used), functionality: fully functional, table length: 4,000 mm, trimming length: 3,000 mm, machine/vehicle number: 202106-050, Simple bridge saw and milling machine for stone and ceramics with electronic control and adjustability. Manual tilting of the head in one axis up to 90 degrees. Electronic feed in 3 axes. The machine is free-standing on a robust steel frame, with no need for concreting. Podpfeyzwirjx Akfjgk

Condition: used, Year of construction: 2007, voltage 400 V current capacity 800 VA frequency 50 Hz weight of the machine ca. ca. 355 kg In our opinion, the machine is in good used condition and can be viewed under power by appointment. Accessories, tools and clamping devices shown are only included in the scope Psdpfexwdxcex Akfsgk of delivery if this is noted in the additional information. Changes and errors in the technical data and information as well Subject to prior sale!

Condition: excellent (used), LOADER (BRIDGE-FRAME) WITH DOUBLE PICK-UP STATION Vacuum system (with its pump) No. 2 Vertical supporting columns of the top supporting beam No. 1 Horizontal top supporting beam (where the carriage slide on) No. 1 Motorized sliding carriage with horizontal metal arms Pjdpfowbp Nwjx Akfjgk N. 2 Out-side rollers ways (on gound) to in-feed pile of panels to the Loader N. 1 Out-side motorized rollers table (which out-feed the panels from the Loader) Separate electric and command panel Perimetral safety metal grids Working capacity (cycles/min) 16 (ca.) Min/Max panels thickness mm 10 / 50 (ca.) Min dimensions of the panels mm 250 x 320 (ca.) Max dimensions of the panels mm 1300 x 3000 (ca.) Total installed motor power Kw 80

Condition: excellent (used), LOADER (BRIDGE-FRAME) WITH DOUBLE PICK-UP STATION Vacuum system (with its pump) No. 2 Vertical supporting columns of the top supporting beam No. 1 Horizontal top supporting beam (where the carriage slide on) No. 1 Motorized sliding carriage with horizontal metal arms No. 2 Out-side rollers way (on gound) to in-feed pile of panels to the Loader Out-side motorized rollers table (which receives panels from the Loader) Podpfx Aksfi Tg Hofogk Separate electric and command panel Perimetral safety metal grids Working capacity (cycles/min) 16 (ca.) Min/Max panels thickness mm 10 / 50 (ca.) Min dimensions of the panels mm 250 x 320 (ca.) Max dimensions of the panels mm 1300 x 3000 (ca.) Total installed motor power Kw 30

Condition: ready for operation (used), Width: 1000 mm Length: 1500 mm Plate height: 195 mm Height of the feet: 600 mm Total height, working height: approx. 800 mm Pedpfogq Nawjx Akfogk Weight:

Condition: excellent (used), 5 pieces of hard base with screwed-on aluminum jaws, Pgedpjfxu Tysfx Akfek suitable for a FORKARDT chuck, 250 mm Ø 1 set of inwardly stepped jaws: 190 - 250 mm 1 set of inwardly stepped jaws: 120 - 200 mm 1 set of jaws stepped outwards: 220 mm 1 set of jaws stepped outwards: 100 - 250 mm 1 set of jaws stepped outwards: 120 - 300 mm 1 set of outwardly stepped jaws made of St: 120 - 260 mm 1 set of outwardly stepped jaws made of St: 140 - 240 mm