Used Gmx 250 for sale (18,165)

Condition: used, Year of construction: 2008, turning diameter 250 mm Nljdpjxiy Dfefx Aa Ieh turning length 1185 mm control Siemens 840 D total power requirement 21 / 28 kW

Condition: good (used), Year of construction: 2008, Gildemeister GMX 250 linear, Year of manufacture 2008, Siemens 840 D control system, Max. bar capacity up to 65 mm, Adjustable axes X1/Y1 - 550/180 mm, Z1 - 1185 mm, B1 - 240 degrees, X2 - 180 mm, Z2 - 1050 mm, Z3 - 1150 mm, Chuck Ø 200/250 mm, 1 12-station VDI 40 turret, 46-station HSK 63 magazine, Counter spindle, B-axis NC swivel milling head, 9200 spindle hours, Extraction system, Belt filter, Internal coolant supply 20 bar, Nljdpfowcf Aisx Aa Ijh

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, turning length: 1,185 mm, turning diameter: 640 mm, spindle speed (max.): 4,000 rpm, turning diameter over bed slide: 640 mm, counter spindle torque (max.): 5,000 Nm, Turning and Milling Center with Main and Counter Spindle and Comprehensive Equipment! TECHNICAL DETAILS Turning diameter: 640 mm Turning length: 1,185 mm Swing diameter: 640 mm Distance between headstocks: 1,500 mm SLIDE I X-Axis travel: 550 mm Y-Axis travel: 180 mm Z-Axis travel: 1,185 mm B-Axis: 240° Feed rate X-axis: 0 – 40,000 mm/min Feed rate Y-axis: 1 – 24,000 mm/min Feed rate Z-axis: 1 – 70,000 mm/min Feed rate B-axis: 1 – 20 rpm Rapid traverse X/Y/Z: 40 / 24 / 70 m/min Feed force X/Y/Z S6: 7.00 / 11.00 / 7.50 kN Tool interface: HSK 63 Milling spindle speed: 10 – 12,000 rpm Drive power 100% duty cycle: 13.20 kW Drive power 40% duty cycle: 22.00 kW Milling spindle torque: 60 / 100 Nm Max. tool length: 350 / 200 mm Tool diameter: 80 mm Tool diameter with 2 free pockets: 120 mm Max. tool weight: 6 / 10 kg SLIDE II X-Axis travel: 180 mm Z-Axis travel: 1,050 mm Feed rate X-axis: 1 – 24,000 mm/min Feed rate Z-axis: 1 – 36,000 mm/min Rapid traverse X + Z axes: 24 / 36 m/min Feed force Z / X S6: 11.00 / 9.00 kN Turret (positions): 12 Tool holder: DIN 69880 Ø40 Driven tool positions: 12 Speed: 1 – 4,000 rpm Drive power 100% duty cycle: 10.70 kW Torque S1: 32 Nm SLIDE III Z-Axis travel: 1,150 mm Feed rate Z-axis: 1 – 36,000 mm/min Rapid traverse Z-axis: 36 m/min Feed force Z-axis S6: 13.00 Nm MAIN SPINDLE Model: ISM90 Speed: 10 – 4,000 rpm Drive power 100% duty cycle: 36.00 kW Drive power 40% duty cycle: 45.00 kW Torque at 40% / 100% duty cycle: 800 / 630 Nm Spindle bore: 80 mm COUNTER SPINDLE Speed: 10 – 5,000 rpm Drive power 100% duty cycle: 21.00 kW Drive power 40% duty cycle: 28.00 kW Torque at 40% / 100% duty cycle: 320 / 240 Nm Spindle bore: 80 mm Nlsdpfx Aexf A Edja Ish MACHINE DETAILS Electrical Data Total power requirement: 70.00 kW Dimensions & Weight Machine weight: approx. 20.00 t Footprint: approx. 8.50 x 4.50 x H3.10 m Control Control manufacturer: Siemens Control model: SINUMERIK 840D EQUIPMENT Chip conveyor Oil mist separator DMG Automation WH10top Main spindle ISM90: Hollow chuck, C-axis, 3-jaw power chuck SMW-AUTOBLOK KNCS-NB-315-91 Counter spindle ISM76: Partial hollow chuck, C-axis, 3-jaw power chuck SMW-AUTOBLOK KNCS-NB-315-91 Pick-off unit with integrated conveyor belt Automatic safety cover Differential pressure clamping With pump stand for coolant: Pump 1: 17 l/min at 80 bar / Pump 2: 20 l/min at 8 bar / Pump 3: 40 l/min at 20 bar Hainbuch collet chuck including collets Ø30, 45, 50, 55, 60, 65, 72, 82, 85, 90 1 workpiece pick-off for turret

Condition: used, Year of construction: 2007, swing diameter 640 mm max. turning passage 640 mm control Simens 840 D Powerline - - - - - Main spindle - - - - - - - - - - - bar material dia. 65 mm chuck diameter 200 - 315 mm spindle bore diameter 80 mm diam. of main spindle in forward position 120 mm --- Subspindle --- - - - - - - bar material dia. 65 mm chuck diameter 315 mm spindle bore diameter 80 mm forward bearing diameter 120 mm - - - - - General data - - - - - - - - - - - Njdpfxovx U A Se Aa Islh spindle distance 1.500 mm turning length 1.185 mm Main-/Counter -spindle turning speeds 5.000 U/min driven tools turning speeds 12.000 U/min Slide cross X1, Y1: 550 / 180 mm Slide cross Z1: 1.185 mm Slide cross B1: 240 ° Slide cross X2: 180 mm Slide cross Z2: 1.050 mm Slide cross Z3: 1.150 mm CNC Turning- and Milling Center | DMG GILDEMEISTER - GMX 250 linear equipped with main/counter spindle, chip conveyor, tool changer, a turret for driven tools and and a portal loading system (Pneumotec Portalsystem S-01623a). The machine has only approx. 32.000h operation hours. The machine is in a well-maintained condition. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: GMX250linear | GMX-250 linear | GMX 250linear | GMX-250linear

Condition: good (used), Year of construction: 2007, functionality: fully functional, Heidenhain control system Main and counter spindle Main spindle bar capacity: 90 mm Capto C6 milling spindle 36 tool positions Lower turret, 12x VDI 40 80 bar internal coolant supply Njdpfx Aaowax A Rs Ijlh Many accessories 1.5 m Breuning bar loader

Condition: used, The press is extremely stable thanks to its heavy steel construction, which is fully welded. The working surface of the press can be easily raised and lowered to any position by means of a hydraulic actuator. Additional tools are available and your own tools can be adapted. Specification: Tonnage: 250 T Year: 1991 Nlsdpfxeugtv Is Aa Ieh If you have any further questions, we will be happy to answer them.

Condition: excellent (used), Catalogue number 7445 TECHNICAL DATA Nsdpfx Aoug Uguja Ijlh - Track width: 250 mm - Roller width: 400 mm - Maximum saw blade diameter: 400 mm - Saw blade bore diameter: 80 mm - Maximum cutting height: 140 mm - Table width (with clearance): 730 mm - Table length: 2120 mm * From above: - Pawls - Smooth pressure roller - Pawls - Smooth pressure roller - Saw shaft with blades - 2 smooth pressure rollers From below: - Guide - Smooth slip roller - Pawls - Track - Central lubrication - 2 lasers - Stepless feed speed adjustment - Feed motor: 1.1 kW - Main motor: 37 kW - Electric body lifting: 0.75 kW - Electric saw shaft lifting: 0.75 kW - Extraction port diameter: 200 mm - Overall dimensions (L/W/H): 2200 x 1850 x 2100 mm - Approximate weight: 3000 kg ADVANTAGES – Made in Germany – Laser – Electric lifting of body and saw shaft – Stepless feed speed adjustment – Multi-blade saw, used, in very good condition Net price: 119,900 PLN Net price: 28,540 EUR (at an exchange rate of 4.2 EUR) (Prices may vary with significant exchange rate fluctuations)

Condition: good (used), Year of construction: 2010, saw blade diameter: 250 mm, overall weight: 130 kg, input voltage: 380 V, coolant pump power: 100 W, Huvema HU250 DV cold circular saw for sale Manufacturer: Huvema Type: HU 250 DV Year of manufacture: 2010 Voltage: 400 V 50 Hz Mounted on a tripod, rotating head, quick clamp. 2-speed motor Liquid cooling with pump Dimensions of the saw blade: 250 x 32 mm Cutting capacity 45° straight: 50 x 60 mm Cutting capacity in a 45° circle: 65 mm Cutting capacity 45° square: 55 mm Cutting capacity 90° straight: 55 x 95 mm Cutting capacity in a 90° circle: 70 mm Nedpfx Aaetwdvie Islh Cutting capacity 90° square: 70 mm Dimensions: Height: 150 cm Width: 60 cm Length: 90 cm Weight: approx. 150 kg

Condition: new, Year of construction: 2022, approx. 100.16 running meters, height: 250 cm, shelf load: 3000 kg, pallet racking, heavy-duty racking, high-bay racking, industrial racking, racking immediately from stock Data : Nledpfxsxqwn De Aa Ish - Height : approx. 250 cm - D : approx. 110 cm - L : approx. 100.16 running meters - Load: 3000 kg shelf load - Galvanized uprights - Cross beams 270 x 14 x 5 cm, T30 - Cross beams in orange - New BLT / PR25 - manufactured in Europe & tested according to the current DIN EN 15512 standard. - 100% quality at the best price. Shelf consists of : - 037 x upright approx. 250 cm x 110 cm, disassembled. - 144 x crossbar approx. 270 x 14 x 5 cm, T30. - 288 x safety pins. - Levels: Floor + 2 - 324 pallet spaces incl. floor spaces. -- IMMEDIATELY AVAILABLE SEVERAL TIMES-- Price : 8690,00 € net plus legally valid VAT. You will receive an invoice with VAT shown. The pre-assembly of the frames can be carried out by us for a small surcharge of 12.50 €/net per piece. Transportation : On request, delivery can be carried out by our partner shipping company, the costs for this depend on the zip code. Assembly : If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your factory equipment. Our recommendation : Let us know what you need... We will be happy to help you with the realization of your projects, from planning and ordering to installation.

Condition: new, TECHNICAL DATA: - Base area: 15,000 x 24,000 mm [other variants available] - Grid: 5,000 x 6,000 mm - Top edge of floor covering: 3,340 mm - Clear height: 3,000 mm - Floor covering: 38 mm chipboard, raw/white, P6 grade - Load capacity: 250 kg - Colour: RAL of your choice - Condition: new The platforms can be extended modularly as per the specified grid. Other sizes and heights available upon request. Our team is happy to advise you! Delivery scope: - Columns - Primary and secondary beams - Bracing crosses - Floor covering - Fastening materials PRICES: Variant I: Base area: 30 m² | Dimensions: 5,000 x 6,000 mm | €3,400.00 net, plus shipping and VAT Variant II: Base area: 60 m² | Dimensions: 5,000 x 12,000 mm | €6,008.00 net, plus shipping and VAT Variant III: Base area: 60 m² | Dimensions: 10,000 x 6,000 mm | €6,043.20 net, plus shipping and VAT Variant IV: Base area: 90 m² | Dimensions: 5,000 x 18,000 mm | €8,512.54 net, plus shipping and VAT Variant V: Base area: 120 m² | Dimensions: 5,000 x 24,000 mm | €11,154.85 net, plus shipping and VAT Variant VI: Base area: 180 m² | Dimensions: 10,000 x 18,000 mm | €15,343.02 net, plus shipping and VAT Variant VII: Base area: 240 m² | Dimensions: 10,000 x 24,000 mm | €20,081.60 net, plus shipping and VAT Additional variants available. Optional accessories: - Guardrail - Flush wall connection - Staircase - Transfer station - Collision protection YOUR CONTACTS AT OUR COMPANY: - Tanja Henkelmann - Rainer Nürenberg - Oliver Kopp ⚙️ CUSTOM PLANNING & MANUFACTURING This platform system is an example from our standard range. Of course, we plan and manufacture your storage platform exactly according to your operational requirements – tailored to area, load capacity, installation height, and intended usage. Our design department will prepare a custom, non-binding quote based on your specifications. Whether you are planning a new installation, an extension, or a modernization of existing equipment, we support you with professional expertise and practical solutions. TRANSPORT & ASSEMBLY We would be pleased to assist you with the transport and installation of the equipment. This item is available for collection. Delivery or shipping is possible at an additional cost. Additional costs depend on the destination and shipment scope and can be provided individually upon request. PAYMENT TERMS Payment terms are agreed upon at the time of order. Prices are per unit/net price unless otherwise specified (plus VAT). You will of course receive an invoice with listed VAT. ABOUT US DLK Nordhorn trades in new and used products for warehouse logistics, conveyor technology, warehouse platforms, textile storage, and machinery for commerce, industry, and the trades. Nodpfx Aexpil Eja Ielh We continuously offer attractive used equipment from various manufacturers/brands at favorable conditions. Please feel free to get in touch with any questions. ✅ Four wins – The success building blocks from DLK – Storage technology | Levelmaker® | Logistics | Solutions

Condition: refurbished (used), battery capacity: 500 Ah, battery voltage: 80 V, total height: 627 mm, total length: 1,025 mm, total width: 708 mm, Tested forklift battery for your forklift - 80V 4PZS 500Ah - DIN A + 1 year warranty + Includes Aquamatik filling system + Includes end cell connector & REMA 320 plug (other connectors can be installed upon request) + Capacity: min. 90-100% (C5 capacity protocol will be provided upon delivery) + Year of manufacture: 2024 Nljdpowzvzysfx Aa Ijh Dimensions: Length 1,025 mm Width 708 mm Height 627 mm Weight: approx. 1,210 kg Suitable for the following models and others: Linde E 16 P - 386-02 - side battery change Linde E 20 - 1252-01 Linde E 20 - 336-00 Linde E 20 - 387-00 Linde E 20 FLAT - 336-00 Linde E 20 L - 386-00 Linde E 20 R - 387-00 Linde E 25 - 1252-01 Linde E 25 - 387-00 Linde E 25 C - 387-00 Linde E 25 R - 387-00 Linde E 25 RL - 387-00 Linde E 25 S - 1276-00 Linde E 30 - 1252-01 Linde E 30 - 387-00 Linde E 30 - 387-00 - side battery change Linde E 30 / 500 - 387-00 Linde E 30 C - 387-00 Linde E 30 L - 387-00 - side battery change Linde E 30 R - 387-00 Linde E 30 RL - 387-00 Linde E 30 S - 1276-00 Linde P 200 - 370-00 Linde P 250 - 127-00 - vertical battery change Linde P 250 S - 127-05 Linde P 250 SWB - 5007-10 - side battery change Linde P 250 SWB - 5007-10 - vertical battery change Linde W 20 - 127-00 Linde W 20 - 127-00 - vertical battery change Linde W 20 - 127-06 - overhead battery change Linde W 20 - 5007-10 - side battery change Linde V 20 - 5007-10 - vertical battery change Linde W 30 - 5007-10 - side battery change Linde W 30 - 5007-10 - vertical battery change Toyota 7FBMF16 Toyota 7FBMF18 Atlet EH 25 Clark STE 20 Other common battery sizes available on request. Transport possible.

Condition: excellent (used), Year of construction: 2010, Four-jaw chuck 27974 Diameter 250 mm 4 individually adjustable jaws Nsdpfefimg Hox Aa Islh Holder: long taper diameter 80 mm with external thread 125 x 3 mm Keyway 10 mm fe with flange and jaws 193 mm Weight 29 kg Age is estimated

Condition: excellent (used), Catalog number 7308 TECHNICAL DATA - Track width: 250 mm - Roller width: 350 mm - Roller diameter: 80 mm - Max. saw blade diameter: 400 mm - Saw blade bore diameter: 80 mm Nledper Iildofx Aa Ish - Max. cutting height: 150 mm - Table width with clearance: 700 mm - Table length: 1790 mm Top, in order: - Pawls - Pressure roller, slip type - Pawls - Pressure roller, smooth type - Roller with saws - Smooth pressure roller, 2 pcs Bottom: - Guide strip - Smooth slip roller - Pawls - Track Infeed table: - Roller width: 500 mm - Number of rollers: 3 pcs - Total dimension of infeed table (L/W/H): 580x530x900 mm Outfeed table: - Roller width: 500 mm - Number of rollers: 6 pcs - Total dimension of outfeed table (L/W/H): 1210x535x900 mm - Centralized lubrication - Stepless feed speed adjustment - Main motor: 37 kW - Extraction nozzle diameter: 140 mm - Overall dimension of the multi-blade saw (L/W/H): 2000x1450x2000 mm - Total weight approx. 3000 kg ADVANTAGES – German manufacturing – High cutting height – Infeed and outfeed tables – Used multi-blade saw, in very good condition Net price: 46,900 PLN Net price: 11,160 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (The price may change in case of significant exchange rate fluctuations)

Condition: like new (used), Year of construction: 1991, functionality: fully functional, overall weight: 35,000 kg, pressing force: 250 t, type of input current: three-phase, power: 30 kW (40.79 HP), punching force: 250 t, input voltage: 200 V, Equipment: safety light barrier, AIDA NC2-250(1) 250t eccentric press in excellent condition /ctA2/ Manufacturer: AIDA Type: NC2-250(1) Push force: 160t Year of manufacture: approx. 1991 Stroke length: 170mm Distance above table: (adjustable) 280-400mm Table size: 2700x760mm Bear size: 2100x700mm Electrical power: 3x200V(!!), 30kW - Japanese standard Net weight: 35000kg Size: 2760x2800x3980mm Njdpeu Dxb Tefx Aa Iolh Automatic greasing system. Automatic cutting oil dosing - RAZIOL EST-02 Optionally with disc winder and straightener.

Condition: new, Year of construction: 2023, operating hours: 1 h, functionality: fully functional, overall weight: 3,180 kg, fuel type: diesel, tank capacity: 470 l, color: beige, power: 322.15 kW (438.00 HP), output current: 397 A, output voltage: 400 V, output frequency: 50 Hz, type of output current: three-phase, nominal power: 220 kW (299.12 HP), nominal power (apparent): 275 kVA, continuous power: 200 kW (271.92 HP), continuous power (apparent): 250 kVA, total length: 4,463 mm, total width: 1,308 mm, total height: 2,170 mm, rotational speed (max.): 1,500 rpm, motor manufacturer: Doosan, type of cooling: water, AVS-Dieselstromaggregat DW 250 PE2 15 AK14A PRP-Leistung: 200 kW / 250 kVA ESP-Leistung: 220 kW / 275 kVA Motor: Perkins 1206A-E70TTAG3 Abgasstufe: 2 Nlsdpfx Aexlzq Ssa Ijh Drehzahl: 1.500 U/min Drehzahlregler: ECM Betriebsspannung: 12 V Kühlung: wassergekühlt Generator: Stamford UCDI274K Spannung: 400/231 V Spannungsregler: SX460 Steuertafel: DSE 7320 - Notstromautomatik Batterieladegerät 5 Ampere Typ: Haubenaggregat; wettergeschützt, schallgedämmt •Not-Aus-Schalter •Kühler mit mechanischem Ventilator •Grundrahmenkonstruktion mit integriertem Kraftstofftank (470L) und Schwingungsdämpfern •Kühlwasservorwärmung •Spannungs- und Frequenzregelung nach ISO 8528-5 •Aggregat nur für den stationären Einsatz verwendbar Die Aggregate werden als B-Ware verkauft. B-Ware bedeutet, dass die Aggregate optische Mängel wie Flugrost, Rost am Gehäuse aufweisen können. Diese Mängel beeinträchtigen jedoch in keiner Weise die Funktionalität und Leistungsfähigkeit der Aggregate. Mit der Annahme dieses Angebots erkennen Sie die beschriebenen Eigenschaften der Aggregate und den damit verbundenen Zustand ausdrücklich an.

Condition: new, TECHNICAL DATA: - Floor area: 20,000 x 15,000 mm [other variants available] - Grid: 5,000 x 5,000 mm - Top of floor covering: 3,340 mm - Clear height: 3,000 mm - Flooring: Chipboard 38 mm P6 untreated/white - Load capacity: 250 kg - Colour: RAL of your choice - Condition: new The platforms can be extended in the stated grid as standard. Other sizes and heights available on request. Our team will be happy to advise you! Scope of delivery: - Columns - Main and secondary beams - Bracing - Flooring - Fastening materials PRICES: Variant I: Floor area: 25 m² | Dimensions: 5,000 x 5,000 mm | €2,711.50 net, plus shipping and VAT. Variant II: Floor area: 50 m² | Dimensions: 5,000 x 10,000 mm | €4,756.00 net, plus shipping and VAT. Variant III: Floor area: 75 m² | Dimensions: 5,000 x 15,000 mm | €6,659.80 net, plus shipping and VAT. Variant IV: Floor area: 100 m² | Dimensions: 5,000 x 20,000 mm | €8,662.00 net, plus shipping and VAT. Variant V: Floor area: 100 m² | Dimensions: 10,000 x 10,000 mm | €8,381.70 net, plus shipping and VAT. Variant VI: Floor area: 150 m² | Dimensions: 10,000 x 15,000 mm | €12,162.50 net, plus shipping and VAT. Variant VII: Floor area: 200 m² | Dimensions: 10,000 x 20,000 mm | €15,136.80 net, plus shipping and VAT. Variant VIII: Floor area: 300 m² | Dimensions: 20,000 x 15,000 mm | €22,782.72 net, plus shipping and VAT. Further variants available Nedpoxph A Asfx Aa Ielh Optional accessories: - Handrail - Flush wall connection - Staircase - Transfer station - Collision protection YOUR CONTACT PERSONS: - Tanja Henkelmann - Rainer Nürenberg - Oliver Kopp ⚙️ CUSTOM PLANNING & MANUFACTURING This platform system is an example from our standard range. Of course, we design and build your mezzanine platform precisely to your operational requirements – adapted to surface area, load capacity, installation height and intended area of use. Our planning department will provide you with a customized, non-binding quotation based on your specifications. Whether new construction, extension or modernization of existing systems – we support you with comprehensive expertise and practical solutions. TRANSPORT & INSTALLATION We are happy to assist with transport and installation of your goods. This item is available for collection. Delivery or shipping is possible at an extra charge. Additional costs depend on the delivery location and consignment size and can be requested from us on an individual basis. PAYMENT TERMS Payment terms will be agreed upon in case of order. The price is per piece/net price as stated in the description (plus VAT). You will of course receive an invoice with VAT shown separately. ABOUT US The company DLK in Nordhorn trades in new and used products in the areas of warehouse logistics, conveyor technology, mezzanine floors, textile storage as well as machinery for trade, industry and crafts. We continuously offer attractive used equipment from various manufacturers/brands at competitive conditions. Please feel free to contact us with any questions. ✅ Four wins – The success factors of DLK – Warehouse Technology | Levelmaker® | Logistics | Solutions

Condition: excellent (used), Stair Tensioner (28366) Nlodpfxoln Ulao Aa Ioh Clamping height 200 - 250 mm T grooves width 12 mm Clamping screw M 10 4 pieces available Weight 8,5 kg

Condition: excellent (used), CATALOG NUMBER 7212 TECHNICAL DATA - Track width: 250mm - Roller width: 400mm - Roller diameter: 80mm - Max. saw blade diameter: 400mm - Saw blade bore diameter: 80mm - Max. cutting height: 140mm - Table width with clearance: 730mm - Table length: 2130mm From above: - Pawls - Pressure shaft, slip type - Pawls - Pressure shaft, smooth type - Shaft with saw blades - Smooth, pressure shaft, 4 pcs Nsdeqzhiqspfx Aa Ijlh From below: - Smooth, slip shaft - Pawls - Track Infeed table + guide bar: - Roller width: 460mm - Feed table dimensions (L/W): 1660x630mm - Overall dimensions (L/W/H): 2010x630x900mm Outfeed table: - Drive rollers: 8 pcs - Roller width: 800mm - Overall dimensions (L/W/H): 4400x980x880mm - Central lubrication - Electric raise/lower adjustment for upper frame: 0.55kW - Electric adjustment for saw shaft: 0.55kW - Stepless feed speed adjustment: 1–39 m/min - Feed motor: 1.1kW - Main motor: 30kW - Extraction port diameter: 210mm - Overall multi-blade saw dimensions (L/W/H): 2520x1870x2000mm + control panel - Total weight approx. 2500kg ADVANTAGES – German manufacture – High cutting height – Infeed and outfeed tables – Used multi-blade saw, in very good condition Net price: 99,900 PLN Net price: 23,780 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (In the event of significant exchange rate fluctuations, the price may change)

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, type of input current: AC, vibrating bowl feeder Vibrating feeder RNA SRC-N 550mm diam vibrating feeder with controller Nledpfxjwav R So Aa Ish Manufacturer/Typ: RNA SRC-N 250-2R Top bowl diameter: 550 mm Bowl diameter bottom: 250 mm voltage: 230 volts 50Hz protection: ip 44 vibration frequency at 100Hz: 6000 /min vibration controller Bowl diameter bottom: 250 mm Bowl diameter top: 380 mm Inner bowl height: approx. 70 mm overall dimensions: height: 700mm width:600mm weight:80g in good condition! If you need more information. We are here to help! Please contact us using the contact form or give us a call Your ad has been automatically translated. Translation errors are possible.

Condition: new, TECHNICAL DATA: - Base area: 16,000 x 20,000 mm [other options available] - Grid: 4,000 x 5,000 mm - Top edge of floor covering: 3,340 mm - Clear height: 3,000 mm - Floor covering: 38 mm chipboard, P6 raw/white - Load capacity: 250 kg - Colour: RAL of your choice - Condition: new Scope of delivery: - Supports - Main and secondary beams - Cross bracing - Floor decking - Fastening materials PRICES: Variant I: Base area: 20 m² | Area: 4,000 x 5,000 mm | €2,013.00 net, plus shipping and VAT Variant II: Base area: 40 m² | Area: 4,000 x 10,000 mm | €3,531.90 net, plus shipping and VAT Variant III: Base area: 40 m² | Area: 8,000 x 5,000 mm | €3,448.94 net, plus shipping and VAT Variant IV: Base area: 60 m² | Area: 4,000 x 15,000 mm | €5,047.20 net, plus shipping and VAT Variant V: Base area: 80 m² | Area: 4,000 x 20,000 mm | €6,588.00 net, plus shipping and VAT Variant VI: Base area: 80 m² | Area: 8,000 x 10,000 mm | €6,092.40 net, plus shipping and VAT Variant VII: Base area: 80 m² | Area: 16,000 x 5,000 mm | €6,234.00 net, plus shipping and VAT Variant VIII: Base area: 120 m² | Area: 8,000 x 15,000 mm | €8,676.54 net, plus shipping and VAT Variant IX: Base area: 120 m² | Area: 10,000 x 12,000 mm | €8,092.44 net, plus shipping and VAT Variant X: Base area: 160 m² | Area: 8,000 x 20,000 mm | €11,509.72 net, plus shipping and VAT Variant XI: Base area: 160 m² | Area: 16,000 x 10,000 mm | €11,349.24 net, plus shipping and VAT Variant XII: Base area: 240 m² | Area: 16,000 x 15,000 mm | €16,426.80 net, plus shipping and VAT Variant XIII: Base area: 320 m² | Area: 16,000 x 20,000 mm | €21,339.63 net, plus shipping and VAT Other configurations available. Optional accessories: - Guardrails - Flush wall connection - Staircase - Transfer station - Impact protection ⚙️ CUSTOM DESIGN & MANUFACTURING This mezzanine system is just an example from our standard product range. We will of course develop and manufacture your warehouse mezzanine precisely according to your operational requirements – tailored to area, load capacity, installation height, and intended application. Nlodpfxsxpg R Se Aa Ish TRANSPORT & INSTALLATION We are happy to assist with transport and installation of the goods. This item is available for collection. Delivery or shipping is available at an additional charge. The extra costs depend on the delivery location and shipment volume, and can be inquired individually. PAYMENT TERMS Payment terms are to be agreed upon when placing the order. The price is a unit/net price or as specified in the description (plus VAT). Naturally, you will receive an invoice with VAT shown separately. ✅ Four advantages – The success factors of DLK – Warehouse technology | Levelmaker® | Logistics | Solutions

Condition: used, Vise jaw width 200 mm Nledpfx Aaodd Tpij Ish Jaw height 80 mm Plate: Width below 250 mm Less than 500 mm length Opening width 250 mm Weight 72 kg

Condition: excellent (used), Catalogue number: 7545 TECHNICAL DATA Track width: 250mm Shaft width: 220mm Max blade diameter: 300mm Blade bore diameter: 60mm Cutting height: 100mm Table width: 650mm Nedpfsvxu Alox Aa Iolh Table length: 1460mm – Top: 2 rows of pawls Smooth feed roller Blade shaft Smooth feed roller – Bottom: Guide rail Pawls Track 2 feed speed settings + stepless adjustment Central lubrication Feed motor: 1.2kW Main motor: 21kW Extraction outlet diameter: 180mm Overall dimensions (L/W/H): 1700x1450x1500mm Weight: approx. 1800kg – Made in Italy – DTR technical documentation – Robust machine – Used multi-blade saw, in very good condition Net price: 25,900 PLN Net price: 6,160 EUR depending on exchange rate 4.2 EUR (Prices may vary with significant fluctuations)

Condition: good (used), We offer for sale a Heraeus heating and drying oven. Heraeus heating and drying oven manufacturer HERAEUS Type: 6200 condition: Used in good condition air mixing oven: up to 250°C Internal volume: 180 liters temperature controller and timer air mixing voltage: 2800watt 1 phase 230volt 50Hz 12.3A IP20 External housing: width 800 mm, length 890mm, Nedpfx Asvzqyfea Islh height 810 mm. Internal dimensions: width 510 mm, length 550 mm, height 650 mm weight: 100kg

Condition: new, TECHNICAL DATA: - Footprint: 4,000 x 5,000 mm [other versions available] - Grid dimensions: 4,000 x 5,000 mm - Top edge of floor: 3,340 mm - Clear height: 3,000 mm - Floor covering: 38 mm P6 chipboard, untreated/white - Load capacity: 250 kg - Colour: RAL of your choice - Condition: new Scope of delivery: - Columns - Primary and secondary beams - Bracing crosses - Floor panels - Fastening material PRICES: Variant I: Footprint: 20 m² | Area: 4,000 x 5,000 mm | €2,013.00 net, plus transport costs and VAT. Variant II: Footprint: 40 m² | Area: 4,000 x 10,000 mm | €3,531.90 net, plus transport costs and VAT. Variant III: Footprint: 40 m² | Area: 8,000 x 5,000 mm | €3,448.94 net, plus transport costs and VAT. Variant IV: Footprint: 60 m² | Area: 4,000 x 15,000 mm | €5,047.20 net, plus transport costs and VAT. Variant V: Footprint: 80 m² | Area: 4,000 x 20,000 mm | €6,588.00 net, plus transport costs and VAT. Variant VI: Footprint: 80 m² | Area: 8,000 x 10,000 mm | €6,092.40 net, plus transport costs and VAT. Variant VII: Footprint: 80 m² | Area: 16,000 x 5,000 mm | €6,234.00 net, plus transport costs and VAT. Variant VIII: Footprint: 120 m² | Area: 8,000 x 15,000 mm | €8,676.54 net, plus transport costs and VAT. Variant IX: Footprint: 120 m² | Area: 10,000 x 12,000 mm | €8,092.44 net, plus transport costs and VAT. Variant X: Footprint: 160 m² | Area: 8,000 x 20,000 mm | €11,509.72 net, plus transport costs and VAT. Variant XI: Footprint: 160 m² | Area: 16,000 x 10,000 mm | €11,349.24 net, plus transport costs and VAT. Variant XII: Footprint: 240 m² | Area: 16,000 x 15,000 mm | €16,426.80 net, plus transport costs and VAT. Variant XIII: Footprint: 320 m² | Area: 16,000 x 20,000 mm | €21,339.63 net, plus transport costs and VAT. Further versions available. Nedpfx Aasxmkuie Islh Optional accessories: - Safety railings - Flush wall connection - Staircase - Transfer platform - Collision protection ⚙️ CUSTOM DESIGN & MANUFACTURING This mezzanine system is an example from our standard range. Of course, we design and manufacture your storage platform precisely according to your operational requirements – tailored to area, load capacity, construction height and intended area of use. TRANSPORT & ASSEMBLY We would be glad to assist you with the transport and assembly of the goods. This item is available for collection. Delivery or shipment can be arranged at an additional cost. These costs depend on the delivery location and shipment volume and can be individually requested from us. PAYMENT TERMS Payment terms will be coordinated upon order placement. Price refers to unit price/net price, or as stated in the description (plus VAT). You will, of course, receive an invoice with VAT shown. ✅ Four winning factors – The success components of DLK – Warehouse Technology | Levelmaker® | Logistics | Solutions

Condition: excellent (used), Catalogue number: 7548 TECHNICAL DATA Track width: 250mm Roll width: 250mm Max. blade diameter: 350mm Blade bore diameter: 80mm Max. cutting height: 120mm Table width with clearance: 700mm Table length: 1790mm *From above: Pawl mechanisms Pressure roller, smooth Pawl mechanisms Pressure roller, smooth Roller with saw blades Smooth pressure rollers: 2 pcs From below: Guide Smooth sliding roller Pawl mechanisms Njdpfxevx Rcuj Aa Ijlh Track Central lubrication Feed motor: 1.1kW Main motor: 30kW Electric lifting of frame Manual lifting of saw blade roller Extraction nozzle diameter: 160mm Overall dimensions L/W/H: 2250x1700x2000mm Weight approx.: 3000kg - German made - Electric lifting of frame and roller - Infinitely variable feed speed - Multi-blade saw, used, in very good condition Net price: 76,900 PLN Net price: 18,300 EUR (based on 4.2 EUR exchange rate) (Prices may change in case of significant exchange rate fluctuations)