Used Hb 450 for sale (5,503)

Condition: used, functionality: fully functional, Year of construction: 1998, machine/vehicle number: Rod20x10RES, ABUS ZHB overhead crane runway, approx. 20x10m Load capacity / lifting capacity: 1000 kg (1 ton) Hodpfxsxr S Dce Agwsni Technical data: Runway made of ABUS HB250 rails The system is delivered complete: ABUS HB rails, rail connectors, trolleys, end plates, cable carrier, brackets/hangers, etc. Including Abus GM electric chain hoist, travel drives, and pendant control Lifting height approx. 3.5 m The crane is dismantled and available immediately Rail color is affected by oil mist Used condition, see pictures Item location: 75053 Gondelsheim Shipping by freight forwarding or collection by appointment only Demag KBK1, KBK2, and KBK3 rails are in stock!

Condition: ready for operation (used), HB-Technik prebin silo technology Prebin for flour with weighing system We also have the control unit! Call us to discuss all further details. Thank you very much. Hedpfsghmvcjx Agweni

Condition: new, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 500 mm, cutting width (max.): 800 mm, Equipment: CE marking, – DTR technical documentation in Polish Hsdpjyuf Tqjfx Agwoni TECHNICAL PARAMETERS: – flywheel diameter: 815 mm – max. cutting height: 500 mm – max. cutting width: 800 mm – table dimensions: 1030 x 600 mm – table tilt: 0° – 20° – blade dimensions: 5643 x 38 x 0.65 mm – blade speed: 20 m/s – motor power S1: 4.5 kW – large tilting cast iron table – high-quality steel construction – precise bandsaw guidance system above and below the table – rubber-coated wheels for extended bandsaw blade life – overall dimensions (L/W/H): 122 / 77 / 254 cm – weight (net/gross): 680 / 770 kg

Condition: ready for operation (used), Year of construction: 2024, General Data Measurements width 2710 mm Measurements depth 3900 mm Measurements height 2470 mm Machine weight 10000 kg Main Drive Spindle speed range 5000 Spindle motor power 14/17 kW Number of axis 5 Additional Equipment Dynamic two-pressure clamping for the main and counter spindle Tailstock function for the counter spindle with foot switch This 5-axis DMG MORI CLX 450 TC + Robo2GO was manufactured in 2024. It features a universal turning/milling center with a main spindle speed of up to 5000 rpm and a milling spindle speed of up to 12000 rpm. The machine includes a B-axis of ±120°, Y-axis travel of ±100 mm, and a 30-fold chain magazine. It's equipped with Siemens 840D sl control for precision. Consider the opportunity to buy this DMG MORI CLX 450 TC + Robo2GO turn-mill centre. Contact us for more information. Hjdpfx Agex D R U Rjwoni Application Types Turning

Condition: ready for operation (used), Year of construction: 2022, operating hours: 8,574 h, General Data Machine weight 9200 kg Control Unit Hnodpfxjx D Izbo Agwei Brand SIEMENS Main Drive Spindle speed range 5000 Number of axis 5 Movement X-Axis Movement 750 mm Y-Axis Movement 200 mm Z-Axis Movement 1100 mm Workpiece Workpiece drm 400 mm This 5-axis DMG MORI CLX 450 TC was manufactured in 2022, featuring a max. X-axis stroke of 750 mm, Y-axis stroke of 200 mm, and Z-axis stroke of 1,100 mm. It handles a max. workpiece diameter of 400 mm and length of 1,100 mm, with a bar capacity of 65 mm. Spindle speeds reach up to 5000 rpm. Weighs 9200 kg. If you are looking to get high quality turning capabilities consider the DMG MORI CLX 450 TC machine we have for tact us for more information. Application Types Turning

Condition: ready for operation (used), Year of construction: 2019, operating hours: 40 h, Control Unit Brand SIEMENS Model Sinumerik 828D Main Drive Spindle speed range 10–5000 Number of axis 3 Movement X-Axis Movement 450 mm Y-Axis Movement 350 mm Z-Axis Movement 400 mm Tools Type of tool holder SK40 Hnedpfx Aex D Havogwsi This 3-axis EMCO Emcomat FB-450 MC was manufactured in 2019. It features a travel range of X450/Y350/Z400 mm, a fixed angle table of 800x400 mm, and a table load capacity of 450 kg. The spindle speed reaches up to 5000 rpm, complemented by a rapid traverse of 5000 mm/min. Includes a Sinumerik 828D interface with multi-touch display and a comprehensive 3-axis control package. If you are looking to get high-quality milling capabilities consider the EMCO Emcomat FB-450 MC machine we have for sale. Contact us for more information. Application Types Milling

Condition: used, maximum load weight: 700 kg, overall weight: 2,350 kg, axle configuration: 2 axles, first registration: 09/2022, total width: 2,150 mm, total height: 2,550 mm, Errors and prior sale excepted! Internal number: 1401. 22Z0170 ----EQUIPMENT * Sales trailer * Stainless steel panelling * Sales hatch on the left * Stainless steel sales counter * Accessory shelf * Overrun brake system * Supports front and rear * Jockey wheel * Box for 2x gas cylinders ...and much more. ----The vehicle is not refurbished! Nationwide delivery available at extra cost. Errors and prior sale excepted. We are happy to take your vehicle in part exchange. Financing / leasing possible even without down payment! Do you have further questions? We are happy to advise you! Hnodox Iax Ajpfx Agwoi

Condition: used, machine/vehicle number: 13293, Rotor diameter: 450 mm Rotor width: 1000 mm Rotor knives: 9 rows Stator knives: 2 Hedeyuz D Ejpfx Agwjni Infeed cross-section approx. Drive motor: 75 kW

Condition: used, Fan 2.2 kW, 5000 m³/h, exhaust fan, centrifugal fan, used machine Manufacturer: B és S Ventilátor Type: FVFH 450/500 Overall dimensions: Width: 790 mm Depth: 730 mm Height:980 mm Hnodpfjypvcljx Agwsi Year of manufacture: 2017 Airflow: 5000 m³/h Electrical data: 400 V, 2.2 kW, 4.7 A Pressure: 800 Pa

Condition: ready for operation (used), We can offer Sakamura cold nut formers models: NP 430, NP 440, NP 450, NP 460, NP 480 Hnsdpfx Ajv H Ap Aegwsi Diameter of bars from 4mm -33 mm All machines underpowered

Condition: ready for operation (used), Year of construction: 2007, controller manufacturer: SIEMENS, controller model: n/a, This KALTENBACH SKL 450 NA Circular Metal Saw was manufactured in 2007. It features a vertical saw principle with a rotating table for mitre and longitudinal cuts up to 180 degrees. The saw unit is mounted beneath the table, ensuring optimal cutting range utilization. It includes a hydro-pneumatic saw blade feed and a large viewing window for enhanced work area visibility. Ideal for sawing aluminum and non-ferrous metals. Contact us for more information about this machine. Machine Benefits Qualitative Machine Benefits • No defects; the system was refurbished in 2024 and is in like-new condition. / scope of delivery: machine without extraction system, including technical documentation (2 copies in binders) Technical Machine Benefits • Sawing of solid material made of aluminum and aluminum alloys / sawing of profiles, tubes, and flat material / right-angled and mitre cuts up to ±45 degrees / in combination with a length stop, up to ±90 degrees / slot cutting • Rotating table for mitre and longitudinal cuts, with a rotation range of 180 degrees / rotary table adjustment: manually continuously adjustable ±90 degrees • Comes with 450 mm carbide-tipped saw blade, standard tooling, and coolant system / saw blade diameter (standard): 450 mm / kerf width (max. ): 4 mm / saw blade types: carbide-tipped saw blade (hm) / high-speed steel saw blade (hss) / saw blade mounting: mounting hole according to din 8576 • Cutting speed (with 400 mm blade diameter): two-step with v-belt: 1950 / 3900 m/min / feed speed: continuously adjustable: 0–3500 mm/min /rapid return speed: 4500 mm/min • Electrical connection power (two-step with v-belt): 3. 7 / 4. 7 kw (optional: 4. 7 / 6. 3 kw) / compressed air supply: 6–8 bar Hodpoyuum Tsfx Agweni • Weight: 1480 kg / dimensions (l × w × h): 2700 × 1450 × 1900 mm • Electrically adjustable stroke limit for the saw feed / hydro-pneumatic saw blade feed, infinitely adjustable / rapid return stroke for short cycle times / large cabinet-style door for easy saw blade change, electrically interlocked / protective machine hood with large viewing windows, electrically secured / automatic minimum quantity lubrication (mql system)

Condition: excellent (used), Catalogue number 7837 TECHNICAL DATA - Max. blade diameter: 450mm - Spindle diameter: 30mm - Top pneumatic hold-down - Blade guard - Blade guard also functions as a hold-down - Pneumatic blade stroke - Cutting height: 125x125mm, 100x250mm - Cutting capacity (thickness x width): 50x530mm, 100x480mm, 150x380mm, 200x200mm - Main motor: 5.6kW - Extraction port diameter: 100mm - Table dimensions (L/W): 660x480mm - Table height from base - 2 roller tables - Infeed roller table with guide: 1500mm - Outfeed roller table with guide and latch: 1500mm - Roller width: 300mm - Working pressure: 8bar - Overall machine dimensions (without roller tables) L/W/H: 940x780x1150mm - Weight approx. 450kg ADVANTAGES Hnjdpsx Arhcofx Agwji – German manufacture – DTR documentation – 2 roller tables – Pneumatic blade stroke – Saw used, in perfect condition Net price: 14,900 PLN Net price: 3,550 EUR (based on exchange rate 4.2 EUR) (Prices may change in case of significant exchange rate fluctuations)

Condition: excellent (used), CNC lathe DMG CLX 450 V3, year 2018, Siemens, in very good condition. Hnsdpfjx Hqh Sex Agwji

Condition: new, Year of construction: 2025, ♻ The model SD 45 is characterized by a low power connectivity, high productivity, ease to use with a long warranty period. ✔ Power: 15 kW ✔ Shaft length: 430 mm ✔ Shaft diameter: 160 mm ✔ Shaft RPM: 265 rpm Hodpfx Ageic U Dijweni ✔ Number of cutting knives: 15 ✔ Granulation: 10-50 mm ✔ Capacity: up to 1,5 m3/h* ✔ Material discharge opening: 152 mm ✔ Material: Plastics, cardboard, wood (chipboards, MDF boards, etc.) ✔ Filling opening: 620x430 mm ✔ Dimensions L/W/H: 0,95/1,08/1,91 m ✔ Weight: 920 kg 4 years warranty or 2000 working hours

Condition: excellent (used), Pendulum Saw Bottene Motor power: 3.7 kW, 380 V, 50 Hz Maximum saw blade diameter: 500 mm Maximum cutting height: approx. 140 mm Maximum throat: 500 mm With roller table and longitudinal fence on the left, 3000 mm With roller table on the right, 1000 mm Extraction port diameter: 120 mm Dimensions (approx.) L x W x H: 4200 x 1150 x 1650 mm Weight (approx.): 200 kg Saw tiltable to the right Saw and roller table movable Hjdpfeydnitjx Agwjni Saw blade included Note for Used Machines: • Subject to technical changes and prior sale. • Prices listed are ex-works prices, free loaded to truck at location. • Machines have been cleaned and functionality tested. • All machines are sold as inspected, without any warranty or guarantee. Buyers are welcome to inspect machines at our site. • Special agreements are only valid in written form. (We will only respond to inquiries that include your address and telephone number!)

Condition: excellent (used), travel distance X-axis: 450 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 350 mm, feed rate X-axis: 5,000 m/min, feed rate Y-axis: 5,000 m/min, feed rate Z-axis: 5,000 m/min, total height: 2,200 mm, total width: 2,300 mm, total length: 1,990 mm, table width: 400 mm, table length: 800 mm, rotational speed (min.): 5,000 rpm, table load: 300 kg, overall weight: 2,200 kg, Universal milling machine with toolmaker precision  Small-batch production to complex workpieces Vertical milling head with hydraulic tool clamping Y and Z Milling Handwheel in all three axes Linear guideways in all three axes Workspace guard retractable with large chip shield Main motor with spindle brake    X - Travel: 450mm Hsdpfx Aoyucc Nsgwoni Y - Travel: 400mm Z - Travel: 350mm Table Length: 800mm Table Width: 400mm Table load: 300 Feed rate X-Axis:5000mm/min. Feed rate Y-Axis:5000mm/min. Feed rate Z-Axis:5000mm/min. Spindle Taper: 40ISO/Bt/Mk Power on spindle:10kW Speeds / ranges:5000Rpm Length: 1990mm Width: 2300mm Height: 2220mm Weight: 2200kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 2019, travel distance X-axis: 450 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 350 mm, feed rate X-axis: 5,000 m/min, feed rate Y-axis: 5,000 m/min, feed rate Z-axis: 5,000 m/min, total height: 2,220 mm, total width: 2,300 mm, total length: 1,990 mm, table width: 400 mm, table length: 800 mm, table load: 300 kg, overall weight: 2,200 kg, CNC milling machine EMCO - FB 450 MC MACH-ID 9401 Make: EMCO Type: FB 450 MC Control: Siemens 828D ShopTurn Year: 2019 Universal milling machine with toolmaker precision  Small-batch production to complex workpieces Vertical milling head with hydraulic tool clamping Y and Z Milling Handwheel in all three axes Linear guideways in all three axes Workspace guard retractable with large chip shield Main motor with spindle brake    X - Travel: 450mm Y - Travel: 400mm Z - Travel: 350mm Table Length: 800mm Table Width: 400mm Table load: 300 Feed rate X-Axis:5000mm/min. Feed rate Y-Axis:5000mm/min. Feed rate Z-Axis:5000mm/min. Spindle Taper: 40ISO/Bt/Mk Power on spindle:10kW Speeds / ranges:5000Rpm Length: 1990mm Width: 2300mm Height: 2220mm Weight: 2200kg Hnedoyub Udepfx Agwei Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, machine/vehicle number: 11667, Rotor diameter: 450 mm Hnodpfxeyr Tmtj Agwji Rotor width: 600 mm 3 blade rotors 2 rows of stator blades Inlet cross-section approx. 450 x 600 mm Drive motor: 30 kW

Condition: used, machine/vehicle number: 11431, Rotor diameter: 450 mm Rotor width: 600 mm Paddle rotor 3×3 rotor knives (offset), 2 rows of stator knives Infeed cross-section approx. 550 x 625 mm Hnjdpfoyr Tkrjx Agwei Drive motor 30 kW Application: Primarily suitable for shredding hollow blow-moulded bodies and bulky moulded parts such as bottles, canisters, jugs, bowls, baskets, buckets, tubs, etc.

Condition: used, Year of construction: 2023, cutting diameter 450 mm saw band length 6600 x 41 x 1,3 mm table height 800 mm 450 mm 450 mm 450 x 270 mm workpiece weight 15 - 95 m/min 7,5 kW work height max. 3000 kg connected load 3750 x 1400 x 2100 mm NEW PRICE ~ 40.700 EURO Hodpfsytx Sqox Agwjni very good condition Semi-automatic bandsaw, two-column guided Equipment: - hydraulic vice - infinitely variable cutting speed - chip conveyor - line laser - driven chip brush - coolant device - operating instructions

Condition: excellent (used), CATALOG NUMBER 7903 Technical data: - track width: 450mm - shaft width: 420mm - installed saw blade: 400mm - max saw blade diameter: 450mm - saw blade bore diameter: 80mm Hodpfjynkvdox Agweni - max cutting height with 450mm blade: 160mm - table dimensions: 2230x860mm – from above: - kickbacks/stoppers - sliding shaft - kickbacks - smooth sliding roller - hold-down - shaft with saws - hold-down - 2 sliding, hold-down shafts – from below: - roller in front of the table - guide - stoppers - track - central track lubrication - manual lifting of saw shaft - electric body lifting: 0.75kW - stepless feed speed adjustment - extraction port diameter: 280mm - main motor: 75kW - overall dimensions (L/W/H): 2360x200x1960mm - weight: 3250kg ADVANTAGES – Czech production – used multi-blade saw – upper control panel – DTR (technical documentation) – very good condition Net price: 69,900 PLN Net price: 16,650 EUR Net price calculated at exchange rate of 4.2 PLN/EUR (in case of larger currency fluctuations, the price may change)

Condition: refurbished (used), functionality: fully functional, input voltage: 400 V, type of input current: DC, Equipment: CE marking, The Bernardo HBS 275 model is one of the most renowned and highly regarded bandsaw models in Europe. Within its class of work, it is undoubtedly the best choice. This is a precise bandsaw designed for universal applications—robust, rigid, and highly reliable. The saw features a swiveling arm for cutting angles up to 60°, a tension gauge for the blade, and a coolant system. The cutting capacity is up to 225 mm round (flat: 245x150 mm). Optimal blade tension adjustment thanks to the dial-type tension gauge. Infinitely variable saw arm adjustment via a hydraulic cylinder with regulating valve. Durable, robust quick-release vise. Suitable for cutting solid and hollow materials from various metals. Two-speed motor ensures optimal power for each operation. Double bearing blade guides for perfect tracking and blade movement. Solid frame and arm construction ensure precise work without excessive vibration. Automatic cutoff after the cutting cycle (limit switch). Technical Specifications: Round cutting capacity at 90°: 225 mm Flat cutting capacity at 90°: 245 x 150 mm Square cutting capacity at 90°: 200 x 200 mm Round cutting capacity at 45° R: 160 mm Square cutting capacity at 45° R: 160 x 160 mm Round cutting capacity at 60°: 100 mm Flat cutting capacity at 60°: 100 x 100 mm Working height: 910 mm Bandsaw blade dimensions: 2480 x 27 x 0.9 mm Hedpjytr Hzjfx Agwsni Blade width: 27 mm Cutting speed: 45 / 90 m/min Coolant system pump power: 0.1 kW Motor power: 1.5 kW Motor power S1 100%: 1.1 kW Voltage: 400 V Dimensions (width): 1430 mm Dimensions (depth): 720 mm Dimensions (height): 1700 mm Weight approx.: 190 kg Scope of Delivery: Bandsaw Workpiece stop Base Blade tension gauge Quick-action vise Coolant system Hydraulic cylinder Emergency stop switch Automatic limit switch

Condition: good (used), mileage: 9,28,314 km, power: 331 kW (450.03 HP), first registration: 01/2020, fuel type: diesel, tire size: 385/65R22,5, axle configuration: 4x2, wheelbase: 3,600 mm, fuel: diesel, color: other, driver cabin: sleeper cab, gearing type: automatic, number of gears: 12, emission class: euro6, suspension: steel-air, total length: 5,800 mm, total width: 2,550 mm, total height: 3,700 mm, Year of construction: 2020, Equipment: ABS, air conditioning, central locking, cruise control, electric window regulation, power mirror, seat heater, traction control, = Additional Options and Equipment = - Heated mirrors - Digital tachograph - Tachograph (control unit) - Fixed (fifth wheel) - LED lighting - Alloy rims - Manual adjustment - Space Cab - Lane departure warning system - Fabric upholstery = Remarks = Number of axles: 2, Configuration: 4x2, Payload: 13,400 kg, Curb weight: 7,100 kg, Gross weight: 20,500 kg, Total tank capacity: 430 litres, Fifth wheel height: 117 cm, Fifth wheel: Fixed, Number of differential locks: 1, Alloy rims, Suspension type: Air suspension, Cab type: Space Cab, Cruise control, Tachograph (control unit), Digital tachograph, Air conditioning, Electric windows, Electric mirrors, Color: Multicolor, Heated mirrors, Lighting type: LED, Speed limiter, Lane departure warning system, Air conditioning, Heated seats, Flashing lights, Engine power: 331 kW (444 hp), Fuel: Diesel, Emission standard: Euro 6, Transmission: AS-Tronic, Gearbox: ZF, Speed limiter, Gears: 12, Power steering, ABS, ASR, Starter battery, Central locking, Seats: 2, Seating configuration: 1+1, Seat material: Fabric, Seat adjustment: Manual = Further Information = Transmission Gearbox: ZF, 12 speeds, automatic Axle configuration Brakes: disc brakes Axle 1: Tire size: 385/65R22.5; Steered; Left tire tread: 12 mm; Right tire tread: 6 mm; Suspension: leaf springs Axle 2: Tire size: 315/70R22.5; Twin tires; Inner left tire tread: 6 mm; Outer left tire tread: 7 mm; Inner right tire tread: 5 mm; Outer right tire tread: 6 mm; Suspension: air suspension Weights Unladen weight: 7,100 kg Payload: 13,400 kg Gross vehicle weight: 20,500 kg Interior Number of seats: 2 Condition Technical condition: good Visual condition: good Damages: none Number of keys: 2 Identification License plate: 50-BNV-7 = Company Information = Kleyn Trucks is one of the world’s largest independent dealers of used vehicles. Here you can choose from a constantly changing stock of 1,200 used trucks, tractors, and trailers. Our range includes all European brands, model years, and price categories. Why buy from Kleyn Trucks? Simple! • Large and constantly changing inventory • Recognizable quality • Fair pricing • Reliable business conduct • We speak many languages • We understand our customers • Support for import and transport • (Export) license plates are quickly arranged • Professional technical services • The security of “recognizable quality” • And much more.... Please visit our website for special offers and the complete stock: Hodpfx Aoyt Dlcsgwjni Leasing through Kleyn Trucks is available in most European countries! Quickly calculate your leasing rate and send us an inquiry via our website. Ask directly about our European warranty package.

Condition: excellent (used), Year of construction: 1998, Fritsch Cutting Table, Confectionery Line - Model FT 450-L Hodpeyucy Ijfx Agwoni - Year of manufacture: 1998 - Length: 4.5 m - Electronic control - 2 cutting rollers - Calibrator/option - Technical condition: very good - Collection from warehouse/shipping option - Price on request

Condition: new, Bandsaw HOLZKRAFT HBS 433 - Exhibition machine - Saw blade guide top, Hsdpfxju R S Ake Agwoni Saw blade guide at bottom, Quick clamping device via eccentric lever ----- Technical data ----- Rollers Ø: 430 mm, max. cutting height: 270 mm, max. cutting width with fence: 370 mm, max. cutting width without stop: 410 mm, max. belt length: 3,345 mm, Table size: 610 x 431 mm, Table inclination: -10 - +45 °, Motor 400 V: 1.5 kW, suction nozzle Ø: 2 x 120 mm, Cutting speed: 900 / 450 m/min, Dimensions (LxWxH): 768 x 512 x 2,048 mm, Weight: 130 kg Scope of delivery: 3 band saw blades 6 / 16 / 25 mm - new exhibition machine -