Used Heath Burner Gas Cooker for sale (3,407)

Condition: new, - Dimensions: 900x1320x1530 mm - 400x600 - Power: 20 kW - Motor power: 1.4 kW Fjdpjw Emzfofx Ap Depn - 50 baguettes - Weight: 500 kg Flex oven options: - Stainless steel rack door (FLEX) €420.00 excl. VAT - Base frame €750.00 excl. VAT - Stainless steel rack 10 levels 400x600 €490.00 excl. VAT - Gas burner €1,260.00 excl. VAT - Proofing chamber €2,200.00 excl. VAT - Standard chamber 2 trays 400x600 - Electric chamber positioned between oven and proofing chamber Power: 3.6

Condition: used, - Dimensions LxWxH: 1441x2830x2682mm - Deck dimensions: 800x1800mm - Baking surface: 5.8m² - Without integrated loader or proofer - 4 ports - 4 decks - Ergocom control, 1 control per deck - Voltage: 400V - Power: 32.8kW - Weight: 1797kg - Top and bottom decks: 20mm thick refractory material on the sole - ROC orion EvO deck 1x800mm - Sole and vault in 20mm thick refractory material, 13mm refractory tiles on sides - Interior lighting - High-performance stainless steel heating elements - Integrated heating element protection system in the vault Fpodjw Imi Hjpfx Ap Djn - Independent steam device with water doser for each deck - Pressure reducer - Steam distributed from the rear of the baking chamber, "anti-splash" water diffuser for bread.

Condition: used, - Dimensions: 1970x2150x2730 mm - 2 trolleys: 800x600 mm - Baguette capacity: minimum 360 - Refractory stone (heat accumulator) - Integrated heat recovery unit - Baking surface: 19.2 m² - TOUCHMATIC touch screen control - Voltage: 400V - Power: 4 kW - Burner: Gas Fedexxanpjpfx Ap Djpn - ALL-IN-ONE = Rotary rack oven with integrated heat recovery unit - No additional trades required for installation - No electrical consumption by the heat recovery unit, as it is 100% mechanical - No need to connect to BMS (Building Management System)/central heating, no buffer tanks to store hot water - Automatic adjustment with no need for control, monitoring, or complex programming - Truly maintenance-free heat recovery unit - Heat recovery on each burner operating cycle - Long service life equal to that of the oven’s heat exchanger - Primary energy consumption reduced by 20% (oil/gas) - Improved baking results due to faster achievement of target baking temperature after loading - Further primary energy savings thanks to shorter baking times - No downtimes (no reheating periods) for continuous baking - Heat remains where it is produced and needed: in the baking chamber, to bake your delicious products

Year of construction: 2007, condition: good (used), machine/vehicle number: 12641207, Offer 23108 Technical data: - Welding current max. 550 A 60% ED - 420 A 100% ED - welding current adjustable 50 A - 550 A - 3 coarse levels + 12 fine levels - separate wire feed case with between package 4 m Fpsdelzif Sspfx Ap Dsn - 4 roller wire feed infinitely variable 0,5 - 24 m/min - 2 stroke + 4 stroke - regulation - water cooled hose package approx. 4 lfm - ground cable - pressure reducer - connection 400 V / 64 A - space requirement approx. W 550 x H 1310 x D 1050 mm - weight approx. 150 kg

Condition: used, Year of construction: 2001, functionality: fully functional, Gassner closure feeding system with pneumatic lifting station and blower Air transport filter system Fpodeww Hvmepfx Ap Den Special price due to warehouse clearance: €3,600 ex works Külsheim.

Condition: used, mileage: 11,400 km, power: 140 kW (190.35 HP), first registration: 04/2024, fuel type: diesel, next inspection (TÜV): 04/2027, color: grey, gearing type: automatic, emission class: euro6, number of seats: 5, Equipment: ABS, air conditioning, all wheel drive, central locking, electronic stability program (ESP), immobilizer system, navigation system, second-hand vehicle warranty, soot filter, Special equipment: Fodpfszw R Hyjx Ap Depn Vehicle without model lettering, lumbar support for front left and right seats, electrically adjustable, metallic paint, tire repair kit (mobility pack), front seat heating Additional equipment: Storage package, airbag on passenger side can be deactivated, airbag on driver/passenger side, equipment package: Connected Professional, service system: Remote Services, exterior equipment: high-gloss Shadow Line, exterior mirrors electrically adjustable and heated, exterior mirrors in vehicle color, turn signal integrated into exterior mirror, BMW Live Cockpit Plus, service system: intelligent emergency call including TeleServices, service system: BMW Intelligent Personal Assistant, BMW Curved Display, on-board computer, DAB tuner (digital radio reception), roof rails high-gloss Shadow Line, anti-theft locking wheel bolts, through-loading system (rear center armrest), dynamic brake light, dynamic traction control (DTC), first aid kit, driving assistance system: driving experience control, remote unlocking of tailgate, velour floor mats, footwell lighting in the front, luggage compartment separation (net), luggage compartment lighting, speed limiter, rear lights LED, interior trim: interior trim strips quartz silver matte, body: 5-door, automatic climate control with 3 zones and automatic recirculation control, head airbag system rear, head airbag system front, rear headrests foldable, steering wheel (sports/leather) with multi-function buttons, light alloy wheels, mild hybrid 140 kW (engine 2.0 L - 140 kW diesel), model upgrade, park distance control (PDC) front and rear, parking brake electric, low emission according to emission standard Euro 6d, turn signals LED, side airbag rear, side airbag front, seat cover/upholstery: fabric Hevelius, mirror package, exterior mirrors electrically foldable, exterior mirror with curb-side automatic adjustment, right, interior mirror with automatic anti-dazzle function, start/stop system, warning triangle, widescreen display, heat-insulating tinted glass, windshield (design: climate comfort)

Year of construction: 2016, condition: excellent (used), Horiba Here we offer you a Horiba exhaust gas system, model Mexa 7100D. Including JAG-10-000-061 cylinder trolley, approx. 1200 x 1064 x 802 mm and OVN-724A Stationary exhaust gas measurement before/after exhaust aftertreatment, evaluation of exhaust aftertreatment systems, modal analysis (dynamic or transient analysis) during non-stationary operating conditions. Analyzer for CO/CO2 (HC, NO, N2O, SO2), O2, THC 200 operating hours Weight: 620 kg Year of manufacture: 2016 Type: Mexa 7100D Condition: used Collection from our location Fjdpfxjzdy Rns Ap Dopn Scope of supply: (See image) (Changes and errors in the technical data and specifications are subject to change!) We will gladly answer any further questions you may have by telephone.

Year of construction: 2025, condition: new, Gas Cylinder Shot Blasting Machine is a specialized industrial surface-treatment system used to clean, descale, and prepare gas cylinders (like LPG, industrial gas bottles) before repainting, refurbishing, or further processing. ✅ What It Does Fpedpfx Apoxun T Ss Dsn It propels steel shots at high velocity onto the cylinder’s surface inside an enclosed chamber. This process: Removes rust, old paint, and surface contaminants Provides a uniform roughened profile for better paint adhesion (surface preparation) Improves structural inspection accuracy (detecting dents, cracks, corrosion) Restores cylinders to safe working condition for reuse Typical configuration includes: Component Function Blast Chamber Containment of blasting process Blast Wheels / Turbines Propel abrasive media at high speed Work Handling System Conveyor, roller, or rotation devices for cylinders Abrasive Recovery System Collects used shots for recycling Dust Collector Removes blasting dust for environmental compliance Control Panel Automation & process monitoring

Condition: used, mileage: 4,79,000 km, power: 350 kW (475.87 HP), first registration: 04/2015, fuel type: diesel, number of seats: 57, gearing type: automatic, emission class: euro6, color: white, brakes: retarder, Equipment: ABS, air conditioning, bathroom, navigation system, parking heater, * Our internal number: 1004 * S 517 HD * First registered 04/2015 * Clean vehicle * 350 kW / EURO 6 (large engine) * INFO: Currently: 57-seater -> can be expanded to a total of 61 seats according to the vehicle documents. * ..... * NEW TACHOGRAPH - Generation 4.1 installed in August 2025 * Excerpt from the repair history: * Major air conditioning service performed in 06/2026 at EVOBUS (invoice available) * Exhaust cooler replaced at EVOBUS (invoice available) in 06/2026 * Exhaust cooler lines renewed at EVOBUS in 06/2026 * Oil pan sealed at EVOBUS in 06/2026 * Invoice for EUR 7,500 from EVOBUS is available. * TOTAL COSTS EVOBUS invoices: approx. EUR 27,000 * ..... * RETARDER replaced with control unit in August 2024 * Adaptive cruise control replaced in 10/2024 at Evobus workshop * All V-belts / idler pulleys / flat belts / tensioners, ... replaced * Oil change / air filter / diesel filter / ... replaced * Good tires - front axle Conti * Steering column switch replaced in 09/2024 * Retarder * Cruise control * Adaptive cruise control * AIR CONDITIONING * Auxiliary heater * TINTED WINDOWS * WC * 55+1+1 travel seats installed * (expandable to 59+1+1 seats, according to vehicle documents) * Adjustable rearward and sideways * Front matrix with control unit * Alloy wheels * Reversing camera * ... * Vehicle registered and in operation * Mileage and condition may vary. * All information without guarantee Fodswxkh Aspfx Ap Depn * Subject to prior sale * We refer to our general terms and conditions

Condition: like new (used), Year of construction: 2024, functionality: fully functional, operating hours: 10 h, power: 1.5 kW (2.04 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 260 mm, cutting width (max.): 280 mm, control type: PLC-controlled, roller diameter: 260 mm, pivoting range: 60 °, actuation type: electric, rotational speed (max.): 15 rpm, rotational speed (min.): 100 rpm, total height: 1,780 mm, total length: 1,900 mm, total width: 1,050 mm, overall weight: 420 kg, table height: 795 mm, year of last overhaul: 2026, saw band length: 2,970 mm, saw blade speed: 100 rpm, saw blade width: 27 mm, number of digital displays: 1, Equipment: CE marking, cooling unit, documentation/manual, motor brake, rotational speed infinitely variable, PEGAS 260×280 SHI-LR Semi-Automatic Metal Band Saw ✓ Machine sold directly by the manufacturer ✓ Manufacturer's showroom demonstration machine ✓ Now available for sale ✓ Machine sold directly by the manufacturer ✓ 6-month warranty Fjdpfxozhm Eae Ap Djpn ✓ Service and spare parts provided by the manufacturer ✓ Regularly inspected and professionally maintained ✓ Heavy-duty cast iron construction ✓ Inspection and test run available before purchase ✓ Available for immediate delivery Technical Specifications Maximum cutting capacity (round): 255 mm Maximum cutting capacity (rectangular): 280 × 250 mm Continuously adjustable mitre cutting: 60° right to 45° left Semi-automatic hydraulic operation Variable blade speed: 20–100 m/min Motor power: 1.5 kW Saw blade dimensions: 2720 × 27 × 0.9 mm Hydraulic material clamping vice Hydraulic saw head feed and return Coolant system Power supply: 3 × 400 V / 50 Hz Machine weight: approx. 420 kg Built for Daily Industrial Use The PEGAS 260×280 SHI-LR is a semi-automatic band saw designed for both single-piece and small-batch production. The machine is suitable for straight and mitre cutting of structural steel, stainless steel, tool steel, solid bars and profiles. Angle cutting is continuously adjustable from 60° to the right and 45° to the left. All major load-bearing components are manufactured from high-quality cast iron, providing exceptional rigidity, vibration damping, high cutting accuracy and a long service life. The saw head is inclined at 25°, reducing blade wear and extending blade life. The hydraulic semi-automatic cycle controls material clamping, cutting, saw head return and vice opening, while material loading is performed manually. Feed pressure and cutting feed rate are easily adjustable for optimum cutting performance. Inspection and Test Run The machine can be inspected and tested under working conditions at the manufacturer's premises in Slavkov u Brna, Czech Republic. If you are interested, please contact us. We will be happy to demonstrate the machine and answer any questions you may have.

Condition: excellent (used), Year of construction: 2024, functionality: fully functional, operating hours: 500 h, power: 5.5 kW (7.48 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 500 mm, cutting width (max.): 800 mm, control type: CNC control, roller diameter: 500 mm, pivoting range: 60 °, actuation type: electric, rotational speed (max.): 150 rpm, rotational speed (min.): 15 rpm, total height: 2,500 mm, total length: 13,000 mm, total width: 6,000 mm, overall weight: 10,000 kg, table height: 800 mm, Equipment: CE marking, documentation/manual, lighting, rotational speed infinitely variable, Here is the English translation: Complete Pegas Gonda Cutting Center with Pegas 540 Horizont X-CNC Band Saw We offer for sale a fully equipped Pegas Gonda cutting center, which has been used as our presentation, testing, and demonstration workplace at our production facility in Slavkov u Brna, Czech Republic. Pegas Gonda is a manufacturer of Pegas band saws and a supplier of complete cutting lines, including material handling systems – from the entry of bars into the saw to the sorting of finished cut pieces after the saw. The offered workplace has been in operation for approximately 3 years. We are offering the line as used equipment because our development continues, and we will be installing the latest version of the system with a new control system. The cutting center is designed for cutting semi-finished materials with a maximum input material length of 6,000 mm. The maximum material cross-section is 500 × 800 mm for straight cuts and 500 × 500 mm for mitre cuts. The line includes a Pegas 540 Horizont X-CNC band saw with a Siemens S7-1500 control system. At the saw output, there is an integrated conveyor system with a length of approximately 50 m, including a lateral transfer system for finished pieces into 3 buffer zones for subsequent collection of the cut material. Main parameters and equipment: * Complete automated Pegas Gonda cutting center * Pegas 540 Horizont X-CNC band saw * Siemens S7-1500 control system * Input material length up to 6,000 mm * Maximum cross-section for straight cuts: 500 × 800 mm Fpsdpszil Shsfx Ap Dsn * Maximum cross-section for mitre cuts: 500 × 500 mm * Integrated material handling system * Output conveyor system with a length of approx. 50 m * Lateral transfer of finished pieces * 3 buffer zones for sorting and collection of finished pieces * Used as a demonstration, testing, and presentation center * Location: Slavkov u Brna, Czech Republic The equipment is suitable for companies looking for a complete solution for automated cutting of bar material, including handling and sorting of finished cut pieces after the saw. Inspection of the equipment is possible by prior arrangement at the Pegas Gonda production facility in Slavkov u Brna, Czech Republic. I can further modify it into a more commercial, shorter, or technical version suitable for Machineseeker if needed.

Condition: used, Used Siemens type CFR5 G6A single stage gas expansion turbine. System rated approximately 60,000 Nm3/hr gas feed, 55 bar inlet pressure at 145 deg.c. Includes Loher type JKXK-560MR-04A generator rated output of 3035kW at 1509 RPM with connected power load of 2.8MW. Fpodpfxey Aaycs Ap Dsn Additional information available upon request.

Condition: used, Used hydrogen plant designed to produce high purity hydrogen and carbon monoxide from natural gas. Built by Air Liquide and first operated in 2015, shut down in August 2024. Output capacity as follows: - Hydrogen 60000 Nm3/hour with 99.99% purity. - Carbon monoxide 14500 Nm3/hour with approximately 99% purity. (Actual purity depends on volume of nitrogen in the natural gas feedstock.) - Superheated 40 bar steam by-product. The HyCO plant includes the following (5) main sections: - Syngas generation / steam reforming and steam generation - Gas cooling - CO2 removal unit / CO2 scrubbing - Gas drying and cryogenic dismantling - Pressure swing adsorption (PSA) Also included: sub-systems for provision of operating resources, flare system, process control and safety shutdown system. Fodpfx Apoy Ryrbo Djpn

Year of construction: 1995, condition: used, 1 used, well-maintained, water-cooled MIG-MAG welding machine Manufacturer: ARTEC Model: W 501 Fsdpob Nd E Rofx Ap Djpn Year of manufacture: 1995 Technical data: Welding current range up to 500 A Weight approx. 250 kg Accessories / Special features: - Water cooling - Separate wire feeder ARTEC DV-W1 with 4-roller wire feed - Includes hose set, pressure regulator, and grounding cable Further technical data, see images! Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 D - 44143 Dortmund-Wambel

Condition: good (used), Welding current range – 200 A Weight: 158 kg Accessories / Special features: - Separate ESAB A 10 wire feeder with 2-roller wire feed - Includes hose set and ground cable Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 D - 44143 Dortmund - Wambel / Germany Fedpfofkpgdox Ap Depn

Condition: used, This listing is for the Hitech Instruments GIR250 Gas Analyser The unit is in full working condition and is ready for immediate use The GIR250 is a bench‑top / transportable analyser designed to measure oxygen (O₂) and carbon dioxide (CO₂) simultaneously in gas samples. It is made by Hitech Instruments (now part of the MTL / Eaton group). Its design emphasizes ease of use, reliability, and low maintenance cost. Other supporting features: The instrument can be programmed with pass/fail criteria for each gas (alarms). It provides analog outputs, typically 4–20 mA, for external logging or control systems. Fpodjxhdqtspfx Ap Dsn Calibration is designed to be simple (via the front panel keypad) to reduce training burden. The O₂ galvanic cell is user-replaceable (i.e. maintenance can be performed in the field). Mechanical, Electrical & Operational Details The GIR250 is housed in a rugged, transportable case (lab-style) so it can be used as a benchtop or mobile analyser. Sample inlet and outlet connections use 0.25″ (~6 mm) tubing. The sample system should avoid condensation and contaminants; non‑condensing sample environment is required. Operating ambient temperature: –5 to +40 °C (for non‑condensing conditions) Power / interface: standard for bench‑top analysers (the catalogue doesn’t always detail it, but likely mains or DC supply, suitable for lab use) Typical Applications & Suitability Because it can measure both O₂ and CO₂ in a single unit, the GIR250 is used in applications such as: Respiration / breathing gas analysis / Douglas bag analysis (i.e. in physiological or experimental gas mixture measurement) Fermentation / bioprocess monitoring (where O₂ and CO₂ both matter) Gas mixture / inertisation / process gas quality (checking gas purity, calibrating mixtures) It is not primarily intended for measuring very low trace levels (ppm-level) of O₂ or CO₂ unless its ranges are suitably adapted or specified. The design is more for percent-range analysis

Condition: reconditioned (used), Year of construction: 2003, functionality: fully functional, TRACKED SINGLE-SHAFT MULTIBLADE SAWMILL TOS SVITAVY PWR 401 450/160, 75 kW MOTOR Note: Fitted with new guides and a new chain (the replacement cost was quite significant – 36,000 PLN) TECHNICAL DATA - Track width: 450 mm - Shaft width: 420 mm - Mounted blade: 400 mm - Maximum blade diameter: 450 mm - Blade bore diameter: 80 mm - Maximum cutting height with 450 mm blade: 160 mm - Table dimensions: 2230 x 860 mm Top side: - Anti-kickback pawls - Slipper shaft - Anti-kickback pawls - Smooth slip roller - Hold-down - Shaft with bushing and nut - Hold-down - 2 slip/hold-down shafts Bottom side: - Roller before the table - Guide rail - Pawls - Track chain - Central track chain lubrication - Electric rise and fall for sawshaft - Electric body lift: 0.75 kW - Infinitely variable feed speed – new 2.2 kW inverter installed - Extraction port diameter: 280 mm - Main motor: 75 kW Fsdpey Nxdyefx Ap Depn - Overall dimensions (L/W/H): 2360 x 2000 x 1960 mm - Weight: 3250 kg ADVANTAGES - Czech manufacture - Used multiblade saw - Overhead operator’s control panel - Full technical documentation (DTR) - Very good condition - We can provide a warranty for the equipment

Condition: new, functionality: fully functional, Year of construction: 2024, operating hours: 16 h, load capacity: 3,000 kg, lifting height: 4,700 mm, free lift: 1,460 mm, fuel type: gas, mast type: triplex, construction height: 2,215 mm, power: 43 kW (58.46 HP), fork length: 1,150 mm, empty load weight: 4,490 kg, total length: 2,715 mm, drive type: Treibgas, construction width: 1,225 mm, LPG forklift Load center of gravity: 500 ISO class: ISO class 3 = 2,500 - 4,999 kg Mast type: Triplex Transmission: torque converter Speed class: 20 Condition: New machine Technical condition: New Front tires type: Superelastic Front tires Size: SE 28-9-15 Front tires Condition: 80 - 100% Rear tires Type: Superelastic Rear tires Size: SE 6.50 10 Fpjdpfxozmklho Ap Dsn Rear tires Condition: 80 - 100% Description: Simplicity, comfort, reliability and productivity. The MI 30 is a front and mast forklift truck with an internal combustion engine that has a lifting capacity of 3 tons and is aimed at professional users in the logistics and distribution sectors, among others. Extremely robust thanks to a rigorous choice of components and a simplified design, the machine is easy to maintain and will become a permanent part of your fleet. To ensure operator comfort and safety, access to the operator's platform has been simplified: grab handle, non-slip footboard, access from both sides... The view to the outside is optimal thanks to the rear profile supports, a large distance between the mast supports and the open roof. Sideshift, 3rd valve, rear work lights, front work lights, roof cover,

Condition: good (used), Year of construction: 2002, functionality: fully functional, Automatic metal-cutting saw for sale, complete with bar feeder - Type: PEGAS GONDA Automatic 230-AFC - Year: 2002 - Serial No.: 0266232 ADDITIONAL EQUIPMENT: Bar feeder for cutting 5 m bars. Fjdpfxez Iyzfj Ap Dspn The saw is fully automatic. The feeder allows for cutting 5 m bars into pieces of any desired length. For diameters up to 40 mm, it can feed two bars simultaneously. The saw has been regularly maintained, is fully functional, and is in excellent condition. It is connected to the power supply and ready for operation.

Condition: excellent (used), functionality: fully functional, mileage: 669 km, power: 294 kW (399.73 HP), first registration: 06/2023, fuel type: gas, empty load weight: 9,350 kg, maximum load weight: 9,294 kg, overall weight: 18,644 kg, axle configuration: 4x2, wheelbase: 38,000 mm, brakes: retarder, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel-air, number of seats: 2, loading space length: 4,550 mm, loading space width: 2,400 mm, Year of construction: 2023, Equipment: differential lock, full service history, hill-start assist, lane keeping assist, retarder, seat heater, trailer coupling, Iveco S-Way 400/Meiler/CNG/Natural Gas/Leaf Spring Suspension/Trailer Coupling • Manufacturer: IVECO • Type: S-Way 400 • NEW PRICE from €210,000 • Mileage: 669 km • First registration: 06.2023 • Power: 294 kW / 399 hp • Transmission: Automatic • Body: Meiler three-sided tipper • Loading area: L: 4.55 meters x W: 2.40 meters • CNG/Natural Gas • Wheelbase: 3.80 meters • Retarder • Air conditioning • Cruise control • Hill start assist • Lane keeping assist • Starting assist • Differential lock • Hands-free system • Tachograph • Roof hatch • Heated seats • Trailer coupling – Duo-matic and standard connections • Trailer hydraulics • Automatic lights • Heated side mirrors • Xenon lights • Euro: 6 • Unladen weight: 9350 kg Fodpozavzcjfx Ap Depn • Payload: 9294 kg • Permissible total weight: 18644 kg • German vehicle • German documents • Immediately ready for operation • This offer is non-binding and subject to change. - Subject to prior sale, - Errors and/or typos not excluded. - Sale subject to our general terms and conditions.

Condition: used, Year of construction: 2006, functionality: fully functional, power: 22 kW (29.91 HP), input voltage: 400 V, input current: 35 A, input frequency: 50 Hz, type of input current: three-phase, temperature: 750 °C, inner dimension length: 1,000 mm, inner dimension width: 600 mm, inner dimension height: 600 mm, total length: 1,670 mm, total width: 1,700 mm, total height: 1,800 mm, overall weight: 800 kg, number of chambers: 1, Equipment: CE marking, Protective gas annealing furnace, Vötsch type VAW 60/100 • Rated temperature: 750 °C • Power: 22 kW • Connected load: 24 kVA • Usable dimensions: 600 x 600 x 1000 mm (width x height x depth) Fjdpoz Azauefx Ap Dspn Can be inspected while energized.

Condition: good (used), mileage: 2,45,995 km, power: 115 kW (156.36 HP), first registration: 03/2018, tire size: 235/65R16, axle configuration: 4x2, wheelbase: 3,670 mm, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel, number of seats: 3, total length: 6,000 mm, total width: 2,050 mm, total height: 2,730 mm, loading space length: 3,060 mm, loading space width: 1,780 mm, loading space height: 1,910 mm, Year of construction: 2018, Equipment: ABS, Bluetooth, central locking, electric window regulation, power mirror, tail-lift, traction control, = Additional Options and Accessories = - Halogen lamp - None - Tail lift - Manual - Radio/cassette - Reversing camera - Fabric - Partition = Notes = Configuration: 4x2, Payload: 1390 kg, Unladen weight: 2110 kg, Gross vehicle weight: 3500 kg, Trailer load, unbraked: 750 kg, Trailer load, center axle, braked: 2000 kg, Cabin type: Single cab, Number of airbags: 1, Parking assistance: None, Electric windows, Electric mirrors, Partition, Radio/cassette, Color: White, Reversing camera, Lighting type: Halogen lamp, Bluetooth, Engine power: 115 kW (154 hp), Number of cylinders: 4, Engine displacement: 1796 cc, Fuel: Gasoline/Gas, Euro: 6, Drive technology: Timing chain, Transmission type: Automatic, Power steering, ABS, ASR, Starter battery, Body type: extended and raised, Side paneling, Roof rack: None, Side doors: 1, Rear closure: Tail lift, Central locking, Number of seats: 3, Seat configuration: 1+1, Seat covering: Fabric, Seat adjustment: Manual, Tail lift, Tail lift design: Rear door, Load capacity of tail lift: 500 kg, Tail lift manufacturer: Dhollandia, Tail lift material: Steel and aluminum, Tail lift size: 189x145, Battery for ramp, NGT natural gas gasoline EURO6 org NL automatic, Tire type: All-season tires = Additional Information = General Information Fpsdjz Eqvbopfx Ap Den Number of doors: 1 License plate: V-032-LP Axle Configuration Tire size: 235/65R16 Brakes: Disc brakes Suspension: Leaf spring suspension Axle 1: Tire tread depth left: 4 mm; Tire tread depth right: 3 mm Axle 2: Tire tread depth left: 6 mm; Tire tread depth right: 2 mm Weights Unladen weight: 2,110 kg Payload: 1,390 kg GVW: 3,500 kg Functional Tail lift: Dhollandia, Rear door, 500 kg Height of loading area: 65 cm Condition Technical condition: good Optical condition: good Damage: none Number of keys: 1

Condition: new, Professional Stainless Steel Heavy-Duty Cabinet Extremely robust and deep stainless steel cabinet in top industrial quality. This is a special edition that is hardly available on the market in this generous size and depth! The cabinet is ideal for the food industry, commercial kitchens, butcher shops, laboratories, workshops, or discerning private users where hygiene, maximum storage space, and enormous stability are paramount. Thanks to the high-quality stainless steel construction, the cabinet is absolutely resistant to water, water vapor, food acids, as well as organic and inorganic acids. Rare special size: 1800 x 1500 x 670 mm (height x width x depth) – particularly deep design for maximum storage space, also ideal for large boxes and containers! Enormous load capacity: A substantial 200 kg load capacity per shelf (heavy-duty design). Flexible storage space: Includes 4 height-adjustable shelves to customize the shelf heights to your needs. Well-thought-out space division (3-door): Left & Right: Robust storage cabinets / material compartments with adjustable shelves. Center: Wardrobe compartment with integrated clothes rail and sturdy hooks for clean hanging of clothing or equipment. Hygienic base: Integrated, closed 150 mm U-shaped plinth. It completely seals the space to the floor – no dirt traps, absolutely flush with the floor, and easy to clean (HACCP compliant). Doors: Easy-to-open hinged doors with an ergonomic, continuous handle bar. Fpjdpfxszwlnlj Ap Djn "Everything from one source: We would be happy to offer you suitable bank financing for your project." More items – new and used – can be found in our shop! International shipping costs on request!

Condition: used, Power: 18-21kW, with top-mounted hot water tank, still needs to be insulated by the buyer, burner door is missing, an on-site inspection is possible, not connected to power. Fjdez Eudiepfx Ap Depn

Condition: ready for operation (used), Year of construction: 1998, operating hours: 72,000 h, functionality: fully functional, fuel type: gas, color: green, output voltage: 400 V, output frequency: 50 Hz, type of output current: three-phase, rotational speed (max.): 1,500 rpm, motor manufacturer: Jenbacher, type of cooling: water, Available complete Jenbacher 320 power plant with 72,000 operating hours. The engine is from 1998. An overhaul was performed at 42,000 hours, after which the maintenance schedule has been closely followed. It was shut down running at full load (1MW) without any issues. All auxiliaries are included except for the transformer and circuit breaker. Fpjdoytq Hgjpfx Ap Don