Used Heating for sale (15,558)

Condition: ready for operation (used), Compressor DWM DLJP-20x-EWL, Compressor DWM DLJP-20x-EWL, Piston Compressor, Cooling Compressor, Heating Compressor, Used machine Bjdpfxou T H Rls Abtewt Technical Specifications Brand: DWM COPELAND Model: DLJP-20X-EWL Refrigerant: Freon Weight: 82 kg Year of manufacture: 1999 Performance at different temperatures: -20ºC/+40ºC: 4.98 kW -30ºC/+40ºC: 2.75 kW Maximum pressure values: 28/22.5 bar Delivery capacity: 14.50 m³/h Dimensions: Length: 460 mm Width: 330 mm Height: 550 mm Electrical Data: 400V; 5.6A; 1450 RPM

Condition: used, Year of construction: 2002, machine/vehicle number: 98, Heizplatte / Heating Plate Busse HPT 900W Serial-No. 98 822 Heiztemperatur einstellbar / Heating temperature adjustable Bwodpfx Aeupy S Njbtjt Arbeitsfläche / Working area max. 350 x 650mm 5 Trockenklammern / 5 Drying clamps Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: excellent (used), The WZA is a ventilation unit in a cabinet design. It provides supply and exhaust air functions with integrated heat and moisture recovery. The outdoor air supply is provided via a facade connection. The units were commissioned in 2023 but were only in operation for approximately 1 to 1.5 years. Bedpjzr Rflofx Abtswt A total of 6 units are available. A complete purchase is preferred, but individual sales are also possible. Legal note regarding product safety (GPSR): This product has been demonstrably placed on the market in the European Union before December 13, 2024. Therefore, according to Article 54 of EU Regulation 2023/988 (GPSR), it falls under the legal transitional provision for existing stock. The obligation to subsequently record and display digital manufacturer contact information (such as specific email addresses) or modern online hazard warnings in the advertisement does not apply to this item.

Condition: new, Year of construction: 2019, functionality: fully functional, machine/vehicle number: 3588791, HYDAC S31A-IG16 Bodpfx Abex Swz Aotowt Nominal capacity: 288 kW Heat transfer surface: 29.93 m3 Max. operating pressure: 16 bar Volume: 53 L Temperature: 0 - 100 °C

Year of construction: 2011, condition: used, functionality: fully functional, The plate heat exchanger is build up in modules and therefore flexible with respect to enlargements or reductions. It is easy to change the capacity by respectively enlarging or reducing the number of plates. Bodpfxowcqvzs Abtjwt

Condition: like new (used), Year of construction: 2018, functionality: fully functional, Preheating boiler (oil) Aura AKL 2504 G ▪ Power: max. 2500 kW ▪ Flow rate: max. 99 m3/h ▪ Pressure: max. 10 PS ▪ Temperature: -10 / 315 °C ▪ Volume: 1873 L Burner Weishaupt WM-G30/1-A ▪ Power: max. 3500 kW ▪ Gas type: Natural ▪ Pressure: max. 1 bar Bwsdpfx Abjxfa Tletst

Year of construction: 2003, condition: used, functionality: fully functional, maximum load weight: 100 kg, total length: 1,965 mm, total width: 1,970 mm, total height: 2,550 mm, loading space volume: 2 m³, machine/vehicle number: 03108, Heavy-Duty 100 kg Steam-Heated Industrial Tumble Dryer for Garment & Textile Processing The Triveneta Grandi Impianti E/100 R.V. is a heavy-duty industrial steam-heated tumble dryer manufactured by Triveneta Grandi Impianti S.r.l., Italy. Designed for continuous industrial laundry and textile finishing operations, this high-capacity dryer is ideal for garment manufacturing, denim production, commercial laundries, and other high-volume drying applications. This unit (MASI internal reference K672) was used in professional apparel production until the factory shutdown and remained operational. Technical Specifications • Manufacturer: Triveneta Grandi Impianti S.r.l. • Model: E/100 R.V. • Machine Type: Industrial Steam-Heated Tumble Dryer • Serial Number: 03108 • Year: 2003 • Country of Manufacture: Italy • Maximum Load Capacity: 100 kg • Heating System: External Steam Supply • Power Supply: 400 V, 3-Phase, 50 Hz • Machine Weight: Approximately 1,450 kg • Dimensions: • Width: 1,970 mm • Depth: 1,965 mm • Height: 2,550 mm Key Features • High-capacity industrial drying drum • Steam-heated drying system • Digital microprocessor control • Programmable drying cycles • Pneumatic door opening system • Stainless steel front loading door • Twin exhaust and ventilation system • Integrated lint filter housing • Emergency stop system • Heavy-duty industrial construction • Designed for continuous production environments Includes • Triveneta Grandi Impianti E/100 R.V. tumble dryer • Integrated microprocessor control panel • Steam connection interfaces • Lint filtration system • Pneumatic door system • Industrial support frame Applications • Garment manufacturing • Denim production • Industrial laundry operations • Textile finishing • Commercial laundry facilities • Industrial garment drying • High-volume textile processing Condition • Fully operational prior to factory shutdown • Previously used in professional garment production • Good industrial condition • Structurally complete • Normal cosmetic wear consistent with industrial use • Minor surface oxidation around the door frame • Available for inspection before dismantling Location Valga, Estonia Dismantling & Transport Bwodpfx Aozmwdkebtot Buyer is responsible for disconnecting steam, electrical, and utility connections, dismantling, loading, transportation, and all related costs. Professional rigging and lifting equipment are recommended due to the machine's approximately 1.5-tonne weight. Sales Terms Sold as-is, where-is, without warranty. Part of the MASI JEANS factory liquidation. The machine is available individually or together with the complete industrial laundry and finishing line.

Condition: excellent (used), Year of construction: 2017, JUSTSEN/DANSTOKER Heating unit Max Heating output : 1 MW Alloweble pressure : 4,0 bar Alloweble temp : 110 celcius Bwjdpszr E Hqefx Abtjt Test pressure : 6.0 bar Volume : 2200 litre Water cooling foundation Can be used for : Wood waste/wood chips/wood pellets etc. Electric cabinet with PLC touch screen Complete unit, still connected to power, can be examined in working condition on demand.

Year of construction: 2020, operating hours: 14,099 h, condition: excellent (used), machine/vehicle number: S0055742, used ALMIG Belt XP 22 - (8 bar) oil-injected screw compressor with integrated heat recovery with Aircontrol Premium controller Bwedeix Aiyepfx Abtot Operating hours: 14099 Bh Pressure: 8 bar Rated power: 22 kW Delivery quantity: 3.70 m³ / min Sound level: 74 dB (A) Compressed air outlet: G 1 " Dimensions length x width x height: 1250 x 880 x 1515 mm Weight: 681 kg Visit our store we have a lot of used and new compressors on stock.

Condition: used, Dimensions (LxBxH): 135 x 55 x 102 cm Boe-Therm Temp 300 – Oil Heating Unit Serial number: 83054 Type: Temp 300-36-4 VE General Data - Medium: Thermal oil - Oil capacity: 98 liters - Max. temperature: 300 °C - Heating capacity (kW): 36 kW - Voltage: 3 x 400 V / 24 V - Frequency: 50 Hz - Power consumption: approx. 54.8 A - Control system: Electronic panel with digital display and control buttons - Safety features: Overtemperature, oil level, and pressure monitoring Applications - Temperature control in plastics industry (injection moulding, extrusion) - Metal processing (heating systems, forming presses) - Woodworking (veneer presses, laminating presses) - Other processes requiring stable and high temperatures Function The unit heats thermal oil and circulates it through external circuits (such as moulds, press plates, or installations). This ensures a constant temperature up to 300 °C, with high precision and reliability. - Documentation available: No - CE certificate present: No Bwedpoxpva Aefx Abtjt - Serial number: 83054 - Transport dimensions: 1350mm x 550mm x 1020mm (l x w x h) - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, We offer Viessmann natural gas boilers: 1. Viessmann gas boiler TYPE SX 1 Heating output 225 kW Including pump and valves 2. Viessmann gas boiler TYPE SX 1 Bwodsy Dpk Hspfx Abtot Heating output 170 kW Including pump, valves, and piping You will receive a discount when purchasing both boilers.

Year of construction: 1999, condition: excellent (used), working width: 620 mm, machine/vehicle number: SE 01510 A10, Heating Element Welding Machine HP60/40 by BRANSON The drive is hydraulic, supported by positioning and control systems. The machine is equipped with its own vacuum pump. Only a few operating hours (approx. 6,800 hours). Usable heating element area: width 600 mm x depth 400 mm Max. workpiece dimensions: - Max. width: 620 mm - Max. depth: 420 mm - Max. upper height: 350 mm - Max. lower height: 350 mm (Combinations of part heights possible, depending on contour) - Max. processing temperature for contact method: 400°C The modular frame design allows for easy conversion and retrofitting. The side doors and the front door in the welding area can be easily opened (for rapid retooling). The automatic safety lift door ensures a high level of operator safety. The temperature control units on the operator panel have actual/target displays. The control device is a Siemens PLC HMI. The machine is controlled by a Siemens PLC (S7-300 controller). Heating elements are equipped with temperature sensors for temperature regulation and serve as safety cut-offs in case of overheating. The pin systems in the tool mounting surfaces ensure reproducible positioning. Advantages of heating element welding technology: - Reliable welding of workpieces with low or varying wall thicknesses. - Low scrap rate due to dimensionally accurate and repeatable welds. - Precise time, temperature, and force control enable welding of sensitive parts. - Virtually all thermoplastics can be welded with this process. - Different thermoplastic types can be joined (compatibility needs to be verified). Technical data of the machine: Bodjykvdljpfx Abtewt - Power supply: 3 x 400 V AC + N + PE - Power: 25 kVA - Rated current: 20 A - Required cable cross-section: 5 cables, each 6 mm² - Required pneumatic connection: 6 bar Machine dimensions: - Machine width: approx. 1.22 m - Machine width with operator panel: approx. 1.8 m - Machine depth: approx. 2.1 m - Machine depth with operator panel: approx. 2.6 m - Machine height: approx. 2.4 m - Machine height with raised safety door: approx. 2.85 m (open door) Machine weight: approx. 2.2 t

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, machine/vehicle number: 140563, power: 1,300 kW (1,767.51 HP), overall weight: 2,600 kg, total width: 1,424 mm, total length: 3,787 mm, total height: 2,402 mm, pressure: 6 bar, heating capacity: 1,300 kW (1,767.51 HP), fuel: domestic gas H, operating pressure: 6 bar, Equipment: hot water, Bosch Unimat UT-L 10 industrial low-pressure hot-water boiler, manufactured in April 2023. Technical data: - Manufacturer: Bosch Industriekessel Austria GmbH - Model: Unimat UT-L 10 - Year of manufacture: 2023 - Serial number: 140563 - Rated thermal capacity including ECO: 1,300 kW - Maximum allowable pressure: 6 bar - Hydraulic test pressure: 9.6 bar - Allowable temperature range: 0–110 °C - Total boiler volume: 1,370 litres - Approximate dimensions: 3,786 × 1,424 × 2,402 mm - Approximate net boiler weight: 2,600 kg - Heating medium: low-pressure hot water - Design: three-pass flame-tube/smoke-tube boiler - Flue/appliance classification: EN 1749, B23 - CE marking: CE 0085 - Manufactured in Austria - Type plate available The stated dimensions and weight are manufacturer reference values for the UT-L 10 boiler body. Actual dimensions and transport weight may vary depending on the installed burner, economiser, fittings and control equipment. Fuel type and electrical connection data must be taken from the installed burner and control-cabinet nameplates. The exact scope of supply, operating condition and included documentation should be confirmed before purchase. Sale subject to prior sale and verification of the technical information. Bwsdpfx Abozp Rmqjtjt Included equipment, as shown in the photographs: - Natural-gas regulating and supply line - Gas pressure regulator - Gas meter - Pressure gauge - Motorised Bosch valve actuator - Butterfly shut-off/control valves - Associated pipe sections, flanges, gaskets and mounting components The components are supplied dismantled. Completeness and suitability for the buyer’s installation must be verified before commissioning.

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, For sale: a boiler, a UNICONFORT brand water heater. Bwodpfxozluz Do Abtst

Condition: excellent (used), I'm selling a Heraeus T 5042 EK search engine Bwjdpfx Absu Udp Ijtst

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, machine/vehicle number: 21/A186898, power: 141.7 kW (192.66 HP), overall weight: 628 kg, total width: 1,020 mm, total height: 2,385 mm, type of input current: AC, input voltage: 230 V, nominal heat output: 141.7 kW (192.66 HP), temperature: 90 °C, fuel: liquid petroleum gas (LPG), input frequency: 50 Hz, Equipment: documentation/manual, hot water, type plate available, Professional ACV HeatMaster 200 N Boiler – 141.7 kW – Year 2021 For sale: used ACV HeatMaster 200 N boiler, manufactured in 2021. High-capacity boiler with integrated domestic hot water production, suitable for commercial buildings, public institutions, hotels, farms, workshops, and installations requiring significant heating and hot water needs. Bedpfx Asztz H Aebtjwt Key features: Brand: ACV Model: HeatMaster 200 N Year: 2021 Maximum useful power: 141.7 kW Maximum input power: 154 kW Fuel used: propane (LPG) Domestic hot water tank: 400 liters Primary circuit capacity: 241 liters Maximum temperature: 90 °C Maximum heating pressure: 3 bar Maximum domestic hot water pressure: 8.6 bar Electrical supply: 230 V / 50 Hz Dry weight: approximately 628 kg Boiler currently disassembled. It was in operation before disassembly. Propane burner included. Some or all of the peripheral equipment from the previous installation may also be available: tank(s), circulators, valves, and piping components. To be discussed with the buyer based on their needs. Nameplate available. Additional photos available upon request. Heavy equipment: transportation is the responsibility of the buyer. Possibility to discuss loading arrangements. Price: €7,500 excluding VAT, negotiable.

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, type of input current: AC, type of cooling: air, fuel: electricity, Heating circulation pump, ModulA 80-8 360 RED PN6. Bwsdpfx Abozq S Tnetot The ModulA heating circulation pump from Biral is available again after being in operation for two years. The reason is the upcoming connection to the district heating network. There are two units in stock. The buyer will pick up the heating circulation pumps in CH-8620 Wetzikon.

Year of construction: 2021, condition: new, pressing force: 50 t, Here are the technical data of the offered machine: If the press does not exactly meet your requirement profile, please click to request an individual offer exactly according to your needs: Contact us for an individual offer HIDROBRASIL manufactures presses exactly according to your requirements at surprisingly low prices! Technical data + information: hydraulic 50 T heating press for laboratories It is a lower piston press with an open height of 400 mm ram travel 300 mm heating platen capacity up to 250 degrees heating plate size 200x200mm weight about 1500 kg height 1950 mm hydraulics built in the press body Hydraulic tank with 100 l monitored vertical door for the press chamber pressure, position - and speed adjustable via SIEMENS S 7 1200 SIEMENS touch screen monitor with 9 inch Safety technology from SICK (C-press, hydraulic press, hydraulic press, laboratory press, laboratory) Bjdjgrkigjpfx Abtewt Are you looking for a custom-fit machine? Contact us for an individual offer. Our hydraulic presses are manufactured according to German machinery directives, as well as European machinery directives (Directive 2006/42/EC), EC standards and EU safety regulations. Furthermore our presses exceed the Canadian and European safety requirements, because they correspond in all points to the national Brazilian safety guideline NR 12, which is based on these. Our great strength is the special machine construction and the press automation. We sell customized hydraulic presses, press brakes and impact shears at surprisingly low prices. For the hydraulics of the presses we mainly use components of leading European manufacturers.

Year of construction: 2005, condition: excellent (used), Name: Lödige heating/cooling Mixers Manufacturer: Lödige Type: TSHK160 / KGU400 Year built: 2005 Total content: COOLING MIXER: vessel capacity: 391, Jacket capacity: 45 liters. RAPID HEATING MIXER: vessel capacity: 210 liters. Jacket capacity: 30 liters Speed: 104 / 300-1500 rpm Driving force: BEVEL GEAR MOTOR: 11 kW, n1 = 1300 rpm, n2 = 104 rpm and ENGINE IM V1 Frequency controlled: 45kW 300/1500 rpm Operating voltage: 400 V, 50 Hz Material: Stainless steel Hours of operation: Very few operating hours Design: ATEX version / Explosion proof Bwjdpjiup H Tsfx Abtst Gear box: Bevel gear motor/ motor frequency controlled Parts in contact with product: Stainless steel 1.4541 Dimensions: L 4605 x W 4225 x H 3550 mm Technical doc.: Yes Message: It was used in a technical plant for wood chip and melamine resin additives. Accessories: Platform with stairs, 30 kW temperature control unit, control panel, control cabinet, dust filter DN 200/ 100 und DN 150/ 100

Condition: new, Year of construction: 2025, Firebox output: 175 kW Operating output: 140 kW Flue diameter: 200 mm Bwodpfx Aji Hplrebtet Warm air duct: 1 x 500 mm Firebox length: 950 mm Firebox width: 600 mm Firebox height: 860 mm Air flow rate: 8900 m³/h Power consumption: 3500 W Designed for room volume: 3000 m³ Area to be heated: 500/600 m² Oven height without warm air ducts: 2200 mm Oven width: 930 mm Oven length without flue gas fan: 1700 mm Weight: 615 kg

Condition: good (used), Year of construction: 1999, Kohlbach – Hydraulic discharge system with push rods 1. System description The two-beam hydraulic discharge system is used for the uniform and continuous discharge of wood chips from a rectangular fuel silo. The discharge shovels transport the material through alternating hydraulic lifting movements to feed the heating boiler, thereby ensuring a consistent fuel supply. 2. Main dimensions Silo length: Version with 6 discharge shovels: 7.50 m Width of shovels: 900 mm Shovel depth: 250 mm Shovel height: 70 mm 3. Drive and operating principle Hydraulic drive with 2 hydraulic cylinders Automatic, alternating lifting control, synchronized with the boiler control Bjdozl Hqkspfx Abtowt 4. Connections Material discharge into a central collection channel Further transport by means of a screw conveyor or chain conveyor Connection to the heating boiler: DN 315 5. Installation requirements Industrial floor in MONO-FINISH quality with a levelness tolerance of ±5 mm Foundation plates, ceiling openings and cladding to be carried out on site Sufficient service access for the hydraulic unit must be ensured 6. Advantages Reliable operation with wood chips of different grain sizes and qualities Consistent fuel feed for stable 24/7 continuous operation Low maintenance effort The system is dismantled and ready for loading onto the truck. The discharge system does not require special transport because: the discharge beams can be disassembled into 6.3 m long segments, the transport width is significantly below 4.24 m, as the beams are removed individually, the discharge shovels can be dismantled, transport with a standard semi-trailer is possible. Inspection in our warehouse in Szentendre/dismantled is possible after prior arrangement.

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, machine/vehicle number: 66422, pressure: 3.5 bar, 3 buffer tanks with a storage capacity of 2200 liters each, also available for individual sale. Bwsdpfezllc Sex Abtot

Condition: excellent (used), Year of construction: 2016, Solid fuel boiler. Very good condition. Operates with wood chips, wood waste, and sawdust. Bwodsy Uzhrepfx Abtjt

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, Walk-in temperature chamber for testing, trials, or production processes Temperature range: +40°C to +80°C with a control accuracy of +/- 1°C Air conditioning via recirculation air handling unit (approx. 3000 m³/h) and electric heating, approx. 6 kW External dimensions: 4800 x 3200 x 2430 (depth, width, height in mm) Internal dimensions: 4560 x 2960 x 2160 (depth, width, height in mm) Chamber area: approx. 13.5 m² Chamber volume: approx. 29.2 m³ Equipment: - Door with a width of 1200 mm and a height of 2000 mm, with a pre-installed ramp for convenient loading - Viewing window in the door - Floor elements made of 1.5 mm non-slip stainless steel tread plate, glued onto a 15 mm thick, water-resistant laminated pressure distribution plate. Slip resistance class R11. Permissible wheel load: 2500 N - High-quality insulation with 120 mm polyurethane high-temperature foam, U-value according to DIN EN 13165: 0.17 W/m²*K - Temperature-resistant LED ceiling lighting - Temperature-resistant cable duct on the right and left sides with a total of 6 230V sockets - Siemens S7-1200 control system and 7" color touch panel - Integrated PID control for temperature - Recording and graphical display of the temperature profile - Plain text display of fault messages and history tracking, as well as password protection - Potential-free switching contacts for alarm forwarding Electrical connection: AC400V / 3Ph/N/PE / 50 Hz Bwedpfx Ajzpy Idjbtot The system can be inspected by arrangement. The buyer must dismantle and remove the system. As the operating location has been closed, no assistance with logistics can be provided.

Condition: new, Year of construction: 2026, functionality: fully functional, We offer a storage tank for 5000 litre heating oil or diesel. Bedpfxoi Ar D So Abtjwt