Used Oil Heater for sale (13,022)

Condition: excellent (used), Auxiliary heater Buderus 2500 kW. Oil + gas. Housed in 20-foot sea container. Tjdox U Eyfspfx Af Asc

Condition: excellent (used), Loos 1000kW heating container emergency heating with gas burner Conversion to oil or biogas possible Tsdoy Evltspfx Af Aec

Year of construction: 2016, condition: ready for operation (used), Heating output: 1100kW, medium: heat transfer oil, oil type: Maroltherm LH, max. flow temperature: 300°C, permissible operating temperature: 300°C, permissible operating overpressure: 10bar, volume flow: 51m³/h, max. flue gas temperature: 400°C, flow monitoring (differential pressure): 0.1bar-0.36bar, cold start volume flow: 0.1bar, filling capacity: 1500l. Documentation available. On-site inspection is possible. Tjdpswtg Hdefx Af Ajc

Condition: used, machine/vehicle number: Bongard 10.16, functionality: fully functional, -10 outlets -This oven is a Bongard 10.16 deck oven, a true classic for artisanal bakeries Tsdpfxoy Duzws Af Aoc -Type: deck oven with ring-shaped tubes -Energy: gas or oil -Baking surface: 10 m² -Useful height per deck: 200 mm -Number of decks: 5 -Doors: 600 mm, 2 doors per deck -Controls: panel on the right -Steam: high-performance steam generator heated by exhaust gases -Voltage: 400V

Condition: used, Year of construction: 2007, functionality: fully functional, overall weight: 200 kg, REA Jumbo 115 / Jumbo 200, mobile warm air generator (230 V) with separate flue gas duct, mounted oil burner RG 4, pre-installed heating oil filter, radial fan, and plug-ready thermostat interface. Year of manufacture: 2007 - Rated heat input: 115 kW - Air output: 9,000 m³/h Todpfxjyq Ricj Af Ajc - Connection: 230 V - Weight: 200 kg Technical highlights of this series: - Burner hood with oil drip tray - Outlet opening: Ø 600 mm - Pre-fitted for recirculation operation - Shock-protected electrical distribution - Robust construction with large wheels for easy transport, even on rough terrain Accessories such as room thermostat, warm air hoses, tanks and tank heaters, as well as flue pipes and rain caps are not included in this offer but can be provided on request. Note: The buyer can arrange collection via a freight forwarder. If you do not have contact with forwarding agents, we are happy to provide addresses or arrange inquiries on your behalf.

Condition: used, For sale: Oil-fired heating boiler VIESSMANN VITOLA-comferral Serial no. 7450285137530 100 Part no. 7450285-B Tsdpfx Aszcupdof Aec Net price: 300 Euros.

Condition: used, Year of construction: 2002, - Brand : Oil & Steel / Nissan - Type : Scorpion 130 - Year of manufacture: 2002 - Hours: 4294 hours - Odometer: 61,205 km. - Weight: 3340 kg. - Drive: Diesel Tjdpfxoz Hw Nko Af Aec - APK: Working height: 13 meters - Lateral reach: 8 meters - Lifting capacity: 220 kg. - Aerial work platform book available - CE document available - Safety inspection possible - Dutch license plate - Export license plate possible - Video on our website - Trade-in and transport possible *Type: Scorpion 130 * Brand: Socage / Iveco * Construction year: 2002 * Hours: 4294 uur * Km. position: 61205 km. * Weight: 3340 kg. * Working height: 13 meters * Lateral reach: 8 meters * Lifting capacity: 220 kg. * APK: * Drive: Diesel

Condition: good (used), Year of construction: 1993, Giardina oil laquer roller 2 roller Tjdoz D I U Ejpfx Af Asc 2 brush spreader

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, KOPPENS BR 4500/600 | Continuous frying machine for thermal oil Tedpfxezutgke Af Ajc Manufacturer: Koppens Convenience Food Systems Model / Type: BR 4500/600 Serial number: 1219 Year of manufacture: 1998 Power supply: 400 V, 50 Hz, 3 phases, 27 A, 13 kW Working width of the belt: 550 mm Loading height: 925 mm Discharge height: 950 mm Machine weight: 1250 kg Oil heating system: Indirect - coil for thermal oil Maximum coil power: 180 kW Chamber capacity (frying oil): min. 845 liters (max. level above the belt: 80 mm) Frying time: Continuously adjustable in the range of 25 - 250 seconds Belt speed: Continuously adjustable in the range of 1.08 - 10.8 m/min The industrial continuous frying machine Koppens BR 4500/600 is a highly efficient and uncompromising solution designed for professional meat processing plants, poultry processing, fish processing, and convenience food manufacturers. The machine is designed for continuous, immersion frying of a wide range of products – from nuggets, burgers, and breaded cutlets to croquettes and fish fingers. Thanks to the use of a 550 mm wide belt, the device offers a huge throughput while maintaining perfectly consistent quality and color of the finished product, eliminating the problem of undercooked or burnt batches. The heating system based on indirect heat exchange through a coil powered by thermal oil (up to 180 kW) is the most desirable solution in the industry. Unlike electric heaters, thermal oil guarantees a very stable and uniform temperature along the entire length of the frying tank. This protects the edible oil from localized overheating and excessive degradation (oxidation). The mechanical system for lifting the top cover (hood) provides immediate and safe access to the working area, allowing the crew to quickly inspect and effectively perform foam cleaning.

Condition: reconditioned (used), functionality: fully functional, operating pressure: 150 bar, high-pressure hose length: 10,000 mm, input voltage: 400 V, fuel: electricity, overall weight: 135 kg, temperature: 80 °C, NILFISK 5M-150/750 HOT WATER PRESSURE WASHER NEW ELECTRIC HEATER (2x) The device features new accessories, including a German R+M gun, stainless steel lance, steel braided hose, and a 25° power nozzle. A durable brass head with new ceramic pistons and seals guarantees long and trouble-free operation. A highly efficient three-phase motor ensures stable operation even after prolonged use. Todpfx Aozulbgof Aoc With operating parameters of 150 bar and 750 l/h, the machine can be effectively used for heavy-duty work in construction, logistics, and agriculture. Fully electric water heating allows operation in areas where exhaust emissions are prohibited. Each device we offer is individually photographed; you're buying exactly what you see. TECHNICAL DATA: Power supply voltage [V]: 400 ~3 phase Discharge capacity [l/h]: 750 Operating pressure [bar]: 150 Max. Heating temperature [°C]: 80 Heater power [kW]: 24 Detergent tank [l]: 10 + 10 Hose length [m]: 10 Weight [kg]: 135 EQUIPMENT: NEW ELECTRIC HEATER (2x) NEW durable pressure gun from the German brand R+M NEW stainless steel pressure lance NEW reinforced 10m steel braided pressure hose NEW 25° power nozzle WATER FILTER AND GEKA CLAW COUPLINGS - FREE KEY FEATURES: Open oil system - no operating time limits Built-in chemical tank allows for dosing of cleaning fluid directly through the machine Very clear and intuitive control panel Simple design and easy access to individual components under the housing make the machine user-friendly and easy to service

Condition: reconditioned (used), functionality: fully functional, operating pressure: 150 bar, high-pressure hose length: 10,000 mm, input voltage: 400 V, fuel: electricity, overall weight: 135 kg, warranty duration: 6 months, temperature: 80 °C, HOT WATER PRESSURE WASHER NILFISK 5M-150/750 NEW ELECTRIC HEATER (2x) The device has new equipment, including a German brand R+M gun, stainless steel lance, steel braided hose and 25° power nozzle A durable brass head with new ceramic pistons and seals guarantee long and trouble-free operation A very efficient three-phase motor ensures stable operation even with long-term use Thanks to the operating parameters of 150bar and 750l/h, the machine can be effectively used for heavy work in construction, logistics and agriculture Fully electric water heating allows work in places where exhaust gas production is not allowed. Each device we offer has individually taken photos, you buy exactly the machine you see TECHNICAL DATA: Power supply voltage [V]: 400 ~3 phases Pressing capacity [l/h]: 750 Working pressure [bar]: 150 Max. heating temperature [°C]: 80 Heater power [kW]: 24 Cleaning agent tank [l]: 10 + 10 Hose length [m]: 10 Weight [kg]: 135 EQUIPMENT: NEW ELECTRIC HEATER (2x) NEW durable pressure gun by German brand R+M NEW pressure lance made of stainless steel NEW reinforced pressure hose in steel braid 10m NEW power nozzle 25° WATER FILTER AND GEKA claw connectors - FREE KEY FEATURES: Todpfov Src Nox Af Asc Open oil system - no operating time limit Built-in chemical tank allows dosing of cleaning fluid directly through the machine Very legible and intuitive control panel Simple construction and good access to individual elements under the housing make the machine user-friendly and easy to service

Condition: new, functionality: fully functional, empty load weight: 115 kg, input voltage: 230 V, warranty duration: 24 months, temperature: 95 °C, KARCHER HG 64 HEATER TECHNICAL DATA: Model: HG 64 Tsdpfoxykwwex Af Aec Manufacturer: KARCHER Catalog number: 1.030-510.0 Type: Hot water generator Country of manufacture: Germany Series: Professional Condition: NEW Power supply type (Ph/V/Hz): 1 / 230 / 50 Connected load (kW): 0.3 Inlet temperature (max): 80°C Minimum inlet volume: 400 l/h Water pumping capacity (l/h): 400-1300 Safety valve operating pressure (max): 220 bar Hot water operating temperature (max): 95°C Burner power: 64 kW Fuel oil consumption (max): 5.9 kg/h Fuel tank: 20 L Fuel type: EL heating oil or diesel Operating weight: 115 kg Dimensions (L x W x H) (mm): 880 x 680 x 860 ADVANTAGES OF THE KARCHER HG 64: Robust and durable device - High-performance burner manufactured using "Made in Germany" technology. Proven Kärcher safety technology guarantees protection for the device and user. Increased cleaning performance thanks to the use of hot water - Shorter cleaning times and lower labor costs. More effective removal of oils, fats, and grease. Effective germ removal and protection of delicate surfaces. Exceptionally easy maintenance - Easy access to all parts requiring service and maintenance. Integrated fuel filter and removable fuel tank for cleaning. KARCHER HG 64 KIT EQUIPMENT: Karcher Classic gun – M22 thread Karcher 1050 mm spray lance 10 m hose – DN8 – 250 bar – 100°C – M22/M22 Connecting hose (high pressure washer – water heater): 3 m – DN8 – 315 bar – 60°C

Condition: reconditioned (used), functionality: fully functional, Year of construction: 2010, operating hours: 990 h, machine/vehicle number: 198871007, mast type: telescopic, lifting height: 18,000 mm, overall weight: 2,700 kg, empty load weight: 2,700 kg, transport length: 5,200 mm, transport width: 1,400 mm, transport height: 2,000 mm, construction height: 2,000 mm, next inspection (TÜV): 01/2025, fuel type: hybrid, fuel tank capacity: 9 l, tire condition: 85 %, color: white, maximum load weight: 200 kg, Self-propelled crawler telescopic work platform with 18m working height and 8.5m lateral reach with 200kg basket load!!! in very good condition, overhauled in workshop, white non-marking crawlers radio remote control, petrol and electric operation, hydraulic track widening and narrowing possible via remote control, clearance height is less than 2 meters despite 18m working height Tedpfjvmbzwox Af Asc very simple design, therefore very easy to service, Honda petrol engine with speed control via remote control (quieter operation possible) All functions that are possible with the petrol engine work just as well as electrically Power and air in the basket Electronics/control units on the platform replaced, hydraulic hoses replaced, new ball bearings for electric motor, new rubber buffers, return filter, engine oil, fuel filter, air filter, paint on the platform is in good condition, no rust. the basket and the jib arm (the one in front of the basket) are rotatable (both functions are rotatable - special equipment!) the platform has a total of 3 rotation options (tower, jib arm and the basket) and each can be rotated separately! The crawler platform can be rented and purchased. new TÜV can be organized, TIMA transport trailer (with new inspection, new brakes) is also available to buy optionally for 8,000 net we can also organize transport of the platform worldwide!

Year of construction: 2011, condition: not inspected (used), functionality: unexamined, COMAT 1F14 DQ V1.4 LSX3 OIL FILTRATION SYSTEM Tsdpfjz Hvv Nex Af Asc TECHNICAL CHARACTERISTICS: Manufacturer: COMAT Model: 1F14 DQ V1.4 LSX3 Year of manufacture: 2011 Type: Cutting oil superfiltration system Fluid: Neat cutting oil Nominal flow rate: 180 [L/min] Filtration rating: 3 to 5 [μm] Filtration surface area: 4.4 [m²] Filtration system: Filtration with filter aid Filter aid: Cellulose / mineral Compressed air pressure: 6 [bar] Power supply: 400 [V] Frequency: 50 [Hz] Auxiliary voltage: 24 [V] AC Maximum power: 5 [kW] Weight: 800 [kg] Price on request, loading on truck included. Possibility of shipping Worldwide. The information on this page has been obtained by the best of our ability. Therefore, its accuracy can not be guaranteed.

Condition: as good as new (ex-display), Year of construction: 2011, Used steel storage tank according to EN 12285-1 (with test certificate), double-walled, for underground storage of heating oil and diesel fuel, 1 dome (2 domes also possible as an alternative). Capacity: 100,000 liters Diameter: 2,900 mm Length: approx. 15,750 mm Weight: approx. 18,800 kg In addition, we can equip our tanks with the following accessories: - Leakage monitoring with under- and overpressure leak detectors - Dome shaft with shaft cover in a walkable or drive-over design - Partition walls (as a multi-chamber tank) - Internal coatings (e.g., 2K epoxy resin), partial or full linings - Content and level measuring devices, as well as control and regulation technology - Electric tank heaters - Pumps for heating oil, diesel, biodiesel or gasoline - Fuel dispensers for diesel, biodiesel and gasoline – with complete tank data recording on request - External tank insulation with PU foam The tank is cleaned internally, and the external coating has been fully refurbished and tested at 14 kV. Cost-effective delivery with our own truck is possible. Simply let us know the delivery address, and we will provide you with the exact shipping costs immediately. If you require any further information, please call us or send us an email. Tedpfx Aei Enxdjf Aec Trade-in and purchase of tanks/containers is possible; please contact us for details. Delivery time upon agreement! We also have the following sizes of these tanks in stock: - 10,000, 13,000, 16,000, 20,000, 25,000, 30,000, 40,000, 50,000, 60,000, 80,000 liters

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2012, operating hours: 3,000 h, machine/vehicle number: 200011402, load capacity: 200 kg, lifting height: 14,000 mm, lifting power: 200 kg/m, overall weight: 1,650 kg, empty load weight: 1,650 kg, transport width: 1,400 mm, transport height: 2,000 mm, construction height: 2,000 mm, next inspection (TÜV): 08/2026, fuel type: hybrid, fuel tank capacity: 5 l, tire condition: 50 %, color: white, maximum load weight: 200 kg, operation weight: 1,650 kg, Self-propelled, 14-meter tracked articulated boom lift for 200 kg and 120 kg loads, complete with electronic scale, available for sale! Year of manufacture 2012 for €21,800 net, year of manufacture 2014 with white tracks for €22,900 net. Only 78 cm passage width and 1.95 m passage height! Two-person platform with 1.4 m width, which can be detached from the boom with 2 bolts. Power and optical compressed air connection available in the platform and can be used. Operation is possible with gasoline or 230 V electricity (almost silent), allowing work to be carried out on weekends. All functions (driving, outriggers, lifting, etc.) can be operated with electricity or gasoline. Good condition, white, non-marking tracks, all services performed, switching unit for 120/200 kg is new! Fully functional and ready for use! (Current TÜV inspection has expired). If desired, a current TÜV inspection can be arranged. For further questions, please call or send an email. Todpfx Afozrf Sae Aoc

Condition: like new (used), Year of construction: 2022, operating hours: 100 h, functionality: fully functional, OILING LINE FOR SOLID WOOD PANELS Tedpfjz D E Icsx Af Aoc

Condition: new, For sale: high-quality industrial heating element (heizstab) by HTT energy GmbH. Condition: New, unused, stored in warehouse (may have minimal storage marks). 🔧 Technical specifications: Manufacturer: HTT energy GmbH Article number: 20178 Order number: 7122-001 Power: 50 kW Voltage: 400V (3-phase), 50-60 Hz Tedeyx I Rzopfx Af Aec Current: 72.2 A Protection rating: IP65 Max pressure: 10 bar Temperature range: 5 - 350°C Year of production: 2021 📏 Construction: flange heater multi-tube design junction box with terminals 💡 Application: heating water, oil, and other liquids industrial tanks technology installations heating systems 📦 Included: Exactly what is shown in the photos

Condition: used, Year of construction: 2012, machine/vehicle number: IntNr231316, Technical Data – Used LNS FOX IFS WS 500 Feature Specification Model FOX IFS WS 500 Year of manufacture 2012 Extraction capacity approx. 500 m³/h Motor output approx. 0.37 kW Voltage 400 V / 50 Hz (typical) Weight approx. 35 kg Dimensions approx. 465 × 500 × 1,145 mm (W x D x H) Filter stages 1. Pre-filter F5 2. Centrifugal separator 3. Post-filter F5 (optional: HEPA H13) Filtration efficiency 99 % at ≥ 1–2 µm (F9), optional HEPA 99.95 % at ≥ 0.1 µm Noise level approx. 65 dB (model WS2 similar) Accessories & Features • Compact design for installation directly on or next to CNC machines • Stand for extraction • Three-stage filtration for efficient oil and coolant mist separation • Cartridge filter optionally upgradable with HEPA kit • Easy maintenance, low-noise operation, and durable filter elements Technical data and information subject to change and error. Prior sale reserved! Tjdpfx Ajz E N Tlof Ajc

Year of construction: 2012, condition: excellent (used), functionality: fully functional, 1 x Marden Edwards Limited semi-automatic shrink wrapper and heat tunnel. Supplied with new belt. Manufacturer: Marden Edwards Limited Shrink wrapper: Model - ES 60. Serial number - W3710. Heat tunnel: Model - M25-40T. Serial number - W3708. Date of manufacture - 2012. Tunnel aperture dimensions - 515mm wide x 410mm high. Film roller - 595mm long. Sealing bar - 640mm long. Cutting knife - 620mm long. Height between sealing bar and rollers at maximum height - 345mm high. Tsdpfx Aezwxv Njf Asc Electrical requirements - 230 V / 50 hz / 1 phase.

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: nvt, overall weight: 25 kg, Brand new filling machine / filling machine / Dosing machine which can be used for filling liquids, pastes, creams, oils, etc. Suitable for almost all liquids but also thicker substances. At this point you could think of: Shampoos Creams Honey Jam Milk Yogurt Water Alcohol Pesto Disinfection Etc. Very solid machine made from high-quality stainless steel that runs on air and 220v, Plug and Play! Extremely suitable for filling small batches. A very small compressor is enough to get this machine working. This can be supplied if necessary. For this we recommend at least a 12L version. The filling machine has a 500ml cylinder so that it can fill a maximum of 500ml per stroke. By allowing the machine to deliver multiple strokes, a multiple of these is also fine. This also applies to 750ml by giving 2 x 375ml. The smallest stroke is 50ml, everything between 50 and 500ml can be lost in 1 stroke. We also have a model that has a cylinder of 100ml and can therefore fill between 5ml and 100ml per stroke. We would like to inform you further about this. It has a large 25L funnel, and it is also possible to connect the IBC or a 200L barrel to work even faster with large filling quantities. The machine is equipped with a foot pedal and auto mode. In the auto mode, the machine continues to fill continuously and larger quantities can be filled easily and quickly. The speed between fillings can be adjusted. The foot pedal allows you to fill at your own pace. Depending on the operator and number of ML, between 15-25 units per minute can be filled. Which makes this a very fast machine. The machine weighs approximately 15/20kg and can easily be placed on a table. Made entirely from stainless steel, a very high-quality machine. Tsdpforivv Eox Af Aec If you have any questions, please email us and we will be happy to help you with this or another machine. We also have a label machine which forms a very good combination with the filling machine. We aim to respond to you within 24 hours. Of course we can also be reached by telephone. We are happy to assist you on working days between 9:00 AM and 5:00 PM

Condition: used, Year of construction: 2016, operating hours: 1,745 h, power: 5.5 kW (7.48 HP), volume flow: 0.59 m³/h, pressure (max.): 7.75 bar, Equipment: documentation/manual, refrigerant dryer, type plate available, Atlas Copco SF6FF oil-free scroll compressor including refrigerant dryer Technical data Manufacturer: Atlas Copco Type: SF6FF Year of manufacture: 2016 Design: oil-free screw compressor Operating hours: 1745 h Tjdpoz Eqrpjfx Af Ajc Design: Full Feature (FF) Motor power: 5.5 kW / 7.0 hp Supply voltage: 400 V Frequency: 50 Hz Phases: 3 phases Max. operating pressure: 7.75 bar Volumetric flow: 8.0 l/s Flow rate: 0.59 m³/min Speed: 2,905 rpm Weight: approx. 268 kg Compressed air quality: oil-free, ISO 8573-1 Class 0 Country of manufacture: Belgium Including Atlas Copco refrigerant dryer The system is equipped with a suitable Atlas Copco ID11 C1/2 UL-IEC refrigerant dryer. Type: ID11 C1/2 UL-IEC Year of manufacture: 2016 Product no.: 4102001860 Refrigerant: R134a Max. operating pressure: 16 bar Electrical connection: 230 V / 50–60 Hz / 1 phase Power consumption: 0.256 kW

Year of construction: 2006, condition: used, Complete Automatic PET Edible Oil Bottling and Packaging Line – 8,000 Bottles/Hour Complete fully automatic production and packaging line for filling edible oil into 1.0 L PET bottles, with a production capacity of approximately 8,000 bottles per hour. Our asking price is EUR 520,000 net, ex works Shtip, North Macedonia. The price is negotiable, and we are open to considering reasonable offers. Tedpfxezmd Uis Af Aec The line covers the complete production and packaging process, from PET preforms to finished automatically palletized products. The complete line includes: SIAPI EAS 50.100/8 – PET stretch blow moulding machine, 8 cavities Bottle air conveyor and conveying system AVE Industries RVM 30/8 – filling and capping monoblock, 30 filling stations and 8 capping stations Nitrogen injection system Bottle conveyor system AVE Industries 8T H/M E1 – automatic labelling machine AVE Industries CP3-20 – automatic shrink wrapping / packaging machine with heat tunnel Conveyor systems AVE Industries PABR-80 – automatic palletizing system Main specifications: Application: Edible oil Bottle material: PET Bottle size: 1.0 L Line production capacity: approx. 8,000 bottles/hour Main equipment year of manufacture: 2006 Fully automatic production and packaging line The equipment is offered as a complete integrated production line for PET bottle blowing, edible oil filling, capping, labelling, shrink wrapping and automatic palletizing. The complete line is currently installed, in operation and fully functional. Interested buyers can inspect the line and see it running under actual production conditions by prior arrangement. The line is located in Shtip, North Macedonia. Additional technical documentation, photographs and videos of the equipment are available upon request. The complete line is offered for sale as one unit.

Condition: not inspected (used), functionality: unexamined, Equipment: documentation/manual, Weishaupt WL40Z-A oil burner, left-hand version, complete with installation and operating instructions. Used, dismantled unit for professional inspection and repair before commissioning in a suitable heating system. DEVICE DATA Manufacturer: Weishaupt Model: WL40Z-A, left-hand version Dimensions according to documentation: approx. 450 × 480 × 812 mm Weight according to documentation: approx. 37 kg Tjdpfx Afoz Hcufe Asc CONDITION AND DEFECTS Used and untested. Functionality is not guaranteed. Cleaning recommended. Oil hoses must be replaced. Last use and year of removal are unknown. On-site functional testing is not possible. Before commissioning, a specialist company must verify the suitability for the intended system and the safe condition. DELIVERY SCOPE AND PICKUP Oil burner with installation and operating instructions; condition and version see photos. Location: Reutlingen, Germany. Inspection and pickup by appointment. Price: 1,380 EUR net, negotiable, plus statutory value-added tax. Reference: RQ457795

Condition: new, Year of construction: 2026, functionality: fully functional, Our honeycomb heater plates are manufactured and assembled to Clako’s own unique design. 1 Zone, 2 Zone + 4 Zone Heater Plates are manufactured by our own engineer to fit your Cylinder, Platen, Saroglia and Clamshell machines. Strong, durable & available in high grade hardened steel or lightweight toughened aluminium to suits your needs. Tjdpfx Aeyznu Ssf Aoc All of our honeycomb plates are machined to true flatness. Dies (cliches) secure to our plates using low height toggles. Contact our team for details and price.