Used Hebrock Euro 2000 for sale (39)

Condition: ready for operation (used), Year of construction: 2024, workpiece height (max.): 60 mm, feed rate X-axis: 10 m/min, spindle speed (max.): 16,000 rpm, control type: PLC-controlled, The machine has already been disassembled and stored by a specialist. TECHNICAL DETAILS Rotational speed of the miter saw station: approx. 16,000 rpm Rotational speed of the milling station: approx. 16,000 rpm Maximum milling depth: 3 mm Design for edge thickness: 1 mm Hot melt adhesive specification for edge material max.: 3 mm Feed rate: approx. 10 m/min Maximum workpiece thickness: 60 mm EQUIPMENT Maintenance-free, coated glue basin with provision for interchangeable basins Glue dispensing device Pneumatic milling adjustment Combination design with interchangeable plate cutter Corner rounding milling cutter Radius drawing blade Surface drawing blade with pneumatic extraction device Cleaning station Robust chain drive Ball-bearing mounted double roller pressure pad Aggregate viewing window from the machine's rear and operator side Signal lamp for workpiece sequence Extendable workpiece support Kodpfx Aaszb Idfofslw ACCESSORIES Hebrock 8 mm version Hebrock quick-change system for corner milling cutter Hebrock jointing up to 60 mm workpiece thickness Hebrock protective spray for edges Hebrock nesting (milling cutter + radius drawing blade) Hebrock Airtronic Note: Accessories are provided without guarantee. The principle applies: "Item purchased as seen." The prospective buyer must verify the completeness of the item on-site.

Condition: excellent (used), Hebrock F5 Edge Bander Well-equipped, can be inspected before purchase. PRE-MILLING cutters, Glue application with a roller, Has a glue release mechanism, The glue pot is replaceable. A second glue pot is included. Kjdpfx Aasza Uq Ajfjlw Pneumatic pre-trimming guillotine, Pressure rollers, Final trimming saw, Liquids Top and bottom milling unit, R1 – R2 Profiling cylinder Corner rounding unit Flat cylinder, Polishing unit Pneumatic 3-point adjustment Max. veneer thickness in roll: 3mm, Power consumption: 7.8 KW, Max. part thickness: 50mm Used machine, very good condition Mileage: 62,000 meters

Condition: new, Year of construction: 2026, Hebrock - Altendorf Edge Bander F5 next - Brand new machine, still in original packaging with complete equipment - With PLC control including 15" touchscreen - Edge material up to 3 mm - Whispercut jointing head including DIA tool up to 2 mm - Coated maintenance-free glue pot, PUR interchangeable tank - Includes glue drain device downwards - HF milling station with pneumatic milling adjustment - Corner rounding unit - Radius scraper - Surface scraper including pneumatic lift device - Buffing station - Combination milling head - Radius milling head R = 2 mm - Radius corner milling unit R = 2 mm - Quick-change system for corner milling unit - Additional changeover motor for corner milling unit with tooling - Radius changeover motor R = 1 mm - Ball bearings 24.1 and 24.2 mm - Multi-radius scraper R1/R2 - Underframe - Additional interchangeable glue pot including stand - Spray system for release agent PUR - Spray system for cleaning agent PUR - Spray system for edge PUR/foil - Nesting for milling head and radius scraper - Pneumatic 3-point adjustment (radius, chamfer, flush trimming) - Jointing up to 50 mm workpiece thickness - LED lighting inside - Workpiece thickness 8–50 mm - Min. workpiece length approx. 160 mm Ksdpfoy Iw Nrex Aafolw - Feed speed approx. 10 m/min - Dimensions (LxWxH): 4.40 x 1.10 x 1.55 m - Weight: gross: 990 kg; net: 930 kg - Extraction nozzle 1 x 140 mm Delivery and commissioning possible.

Condition: like new (used), Hebrock F4 edger well-equipped, can be inspected before purchase, PRE-MILLING cutters, glue application with a roller, has a glue dispensing system, the glue tank is replaceable pneumatic pre-trimming guillotine, pressure rollers, final trimming saw, milling unit, top and bottom, R1 – R2 Profile edging R1-R2 corner rounding unit, replaceable for 1mm and 2mm flat edging, nesting 3-point pneumatic adjustment Klodpfsy Dcmusx Aafjw LED lighting max. veneer thickness in roll 3mm, feed rate 7 and 10 m/min, power consumption 7.08 kW, the list price of a new machine with this equipment is over 51,000 EUR Machine from 2026, showroom model, operating time 18 hours.

Condition: used, Year of construction: 2012, total height: 1,600 mm, total length: 5,250 mm, total width: 1,440 mm, Edgebander HEBROCK AKV 3006 DK FS maximum edge thickness 3/8 mm min/max. workpiece thickness 10/40 mm min. workpiece length approximately 200 mm min. workpiece width approx. 80 mm feed speed about 10 m/Min. ready in about 6 minutes. Kedpfx Aajwnhb Ssfolw maximum power consumption 12 kW electrical connection 400 V / 3 Ph / 50 Hz Pre-mill Glue unit Pressure roller Chopping saw Milling unit Milling unit Corner rounder Radius scraper Flat scraper Cleaning unit Dimensions (length x width x height) 5250x1445x1600 mm, weight 1550kg - Year: 2012 - Documentation available: No - CE certificate present: No - Transport dimensions: 5250mm x 1445mm x 1600mm (l x w x h) Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: good (used), Year of construction: 2002, I sell the edge banding machine HEBROCK AKV088D, Year 2002. Suitable for curved shaped edges Good condition, possible to test ! Ksdpfxsvx D Aus Aafolw Possible to buy also the Radius milling machine HFF08.

Condition: good (used), Year of construction: 2003, I sell the radius milling machine HEBROCK HFF08, Year 2003. Kledpfx Aaewun H Uofjw Suitable for curved shaped edges Good condition, possible to test ! Possible to buy also the Radius edge banding machine AKV88D.

Condition: good (used), Year of construction: 2005, Brand: Hebrock Model: HFF 08 Machine no: 08/379 Year model: 2005 Edge cutter for simultaneous upper and lower radius/clean milling of excess edging material on workpieces with straight edges and on rounded workpieces with internal and outside radii. Tech data: Max edging thickness: approx. 3mm Max workpiece height: 50mm Inner radius min: 40mm Klodpfx Aaoq H Spvjfow Milling motor: 12000 Rpm Work table height: 865mm Max 6 bar Chipboard: 120mm Milling motor: 0.37Kw Motor: 1.5Kw, 50Hz, 400V 3-phase Stock no: 2001922

Condition: ready for operation (used), Year of construction: 2004, Brand: Hebrock Model: AKV 83 F Year of manufacture: 2004 Machine no: 10759 Technical data: Workpiece thickness: from 10 - 50 mm Feed speed: 3 - 4 m/min Electrical connection: 220/380 Volt, 50 Hz. Power: 3 KW Dimensions: 1750 x 800 x 1250 mm (complete) Kjdju Racxopfx Aafjlw Weight: approx. 95 kg. Heating: 3 KW, with stepless electronic temperature control, 0 - 650 degrees C Motor: 3.5 kW Stock no: 2002311BXA

Condition: good (used), Year of construction: 2005, Brand: Hebrock Model: AKV 88 D Machine no: 569-P3 Year model: 2005 Kodpfxsq Ihxpe Aafjlw Tech data: Max edging thickness: approx. 3mm Max working height: 50mm Inner radius min: approx. 8mm Feed speed 0-7 m/min Warm-up time: approx. 6.5 min Motor: 9.3Kw, 50Hz, 400V Machine size (lxwxh): 1360x690x1220mm Weight: approx. 150Kg Stock no: 2001921BXA

Condition: good (used), Year of construction: 2007, machine/vehicle number: 1386, functionality: fully functional, input voltage: 400 V, input current: 31 A, input frequency: 50 Hz, type of input current: three-phase, workpiece height (max.): 50 mm, edge thickness (max.): 8 mm, height adjustment type: mechanical, year of last overhaul: 2025, Hebrock Edge Banding Machine AKV 3003 DK F Edge banding machine with hot melt adhesive application Kjdoyud Sfjpfx Aafelw to the workpiece for edge material up to 8 mm and joint trimming including DIA tools - ergonomically positioned control panel - easy adjustment options from the operator’s side (digital displays) - maintenance-free quick heat-up glue pot - robust chain drive - high-frequency crosscut saw (300 Hz) - high-frequency flush milling station incl. tool fitting and fine adjustment from the operator’s side - automatic edge feed - safety and noise protection hood - extendable workpiece support - electronic temperature controller - pneumatic end trimming for up to 3 mm edge thickness and 60 mm edge height - double roller upper pressure - signal lamp for workpiece tracking - aggregate viewing window from operator and rear side - CE-compliant safety standard complete with: - surface scraping unit - corner rounding cutter - 8 mm edge thickness Workpiece height approx. 10 - 40 mm, Feed rate approx. 10 m/min, Power consumption 11 kW (31 A) 400 Volt, 50 Hz, Length approx. 4300 mm Weight approx. 1250 kg Sold in current condition as inspected, ex location Seevetal, excluding freight and packaging, sale subject to prior sale.

Condition: new, 3 mm Total length 4122 mm Klodovwd Uuepfx Aafjw Feed speed 10 m/min. with PLC control (incl. touchscreen) and hot-melt adhesive application to the workpiece foredgebanding material up to 3 mmjointing cutter (incl. DIA tool) up to 2 mm cutter depth1),maintenance-free glue tray with change tray pre-equipment incl. adhesive discharge device,HF cross-cut saw station (approx. 12,000 rpm),HF trimming station (approx. 12,000 rpm) with separate pneumatic trimming adjustment andchange plate trimmer (combined version),corner rounding cutter,surface scraper (incl. pneumatic discharge device) with separate pneumatic trimming adjustment andchange plate trimmer (combined version),corner rounding cutter) with separate pneumatic routing adjustment andinterchangeable plate router (combi version),corner rounding router,surface scraper (incl. pneumatic lift-out),free space (for cleaning station or radius scraper),robust chain drive,ball bearing mounted double roller top pressure,viewing window from rear of machine,pull-out workpiece support,feed rate approx. 10 m/. No. F4/00/11- Joining head WhispercutF4/500/10- Combination milling headF4/500/20- Radius milling cutter R=2mmF4/500/2- Radius corner milling cutter R=2mmF4/08/2- Quick-change equipment for corner milling cutterF4/08/4- Radius scraper (incl. F4/09- Radius radius scraper R=2mmF4/09/2- ChassisF4/10- Pneumatic 3-point adjustment(radius, chamfer, flush milling)F4/30

Condition: used, Year of construction: 1994, for pre-coated edges including a lot of edge material with outriggers on both sides end cap station 3-roller feed used, good condition Make Hebrock Type AKV-83 Year of construction 1994 Edge band thickness 1.0 mm Workpiece height max. 50 mm Workpiece width min. 50 mm Workpiece length min. 170 mm Space requirement approx. 1700 mm x 690 mm x 500 mm Kjdpfevwfzvjx Aafjlw Storage location 97447 Gerolzhofen, freely loaded, unpacked Handover in the current condition as seen, without guarantee and guarantee

Condition: used, Year of construction: 2007, machine/vehicle number: Werksüberarbeitungsnummer: WÜA1363DK-F7560, Used Machine GM020.0068 AKV 3003 DK - F Year of manufacture: 2007 Ksdpfxjw Nih Ij Aafelw Specification: 3 mm 1st milling station: Combination Surface pull scraper with extraction Chassis Pneumatic milling adjustment Limit switch lever, 7.5° inclination