Edge banding machine

HEBROCK F 5 - sofort verfügbar -

Condition: new, Year of construction: 2026, The Hebrock F 5 If you want maximum performance, the Hebrock F 5 is the solution for edge banding in demanding craft businesses. The F 5 guarantees edge processing in all steps, as it is equipped with all the components you need for your requirements: grooving cutter, miter saw, milling unit, radius pull blade, corner cutter, surface pull blade, and finishing station. For even more flexibility on the way to the perfect finish, the F 5 can optionally be equipped with a practical multi-radius pull blade. Max. edge thickness: 3 mm Max. workpiece thickness: 50 mm Ready for operation in 3.5 minutes Equipment: Hebrock F5 Next - 10 m/min Edge banding machine F5 Next With PLC control (incl. touchscreen) and hot melt adhesive application to the workpiece for edge material up to 3 mm; grooving cutter (incl. diamond tool) up to 2 mm cutting depth, maintenance-free glue tank with interchangeable tank preparation incl. glue dispensing device, high-frequency miter saw station (approx. 12,000 rpm), high-frequency milling station (approx. 12,000 rpm) with separate pneumatic milling adjustment and interchangeable plate milling cutter (combination design), corner rounding cutter, radius pull blade, surface pull blade (incl. pneumatic lifting mechanism), finishing station, robust chain drive, ball-bearing double roller pressure pad, viewing window from the rear of the machine, extendable workpiece support, feed rate approx. 10 m/min. Hebrock F5 F5/08/4 Quick-change preparation for corner cutter F5/08/5 additional interchangeable motor for corner cutter with tool set F5/09/4 Multi-radius pull blade (R1/R2) F5/10 Undercarriage F5/14 additional interchangeable tank F5/24/1 Spray device for release agent F5/24/2 Spray device for cleaning agent F5/25 Spray device for edge F5/27 Nesting for milling cutter and radius pull blade F6/28 Spray for texture finish F5/30 Pneumatic 3-point adjustment (radius, bevel, flush milling) F5/31 Jointing up to 50 mm Dcjdpfxei Anade Afiek F5/32 LED lighting Location: In stock at warehouse 54634 Bitburg Immediately available - in stock.

Condition: used, Year of construction: 2008, machine/vehicle number: 0-411-49-1873, Technical data: - Manufacturer: Bütfering - Type: Optimat SGO 211/RC - Number of grinding units: 2 - Year of manufacture: 2008 - Working width: 1.100 mm - Grinding belt width: 1.120 mm - Grinding belt length: 1.900 mm - Workpiece thickness: 3-160 mm - Feed speed: 2,5-13 m/min. - Table height adjustment Standard equipment: - Automatic workpiece thickness adjustment - Stepless feed speed via requency converter. - 125 grinding programs can be stored - Wear-free braking system 1. Grinding unit (R) - Calibration roller - Profiled steel contact roller - Diameter 160 mm - Drive motor: 15 kW 2nd grinding unit (C) Dodpfx Aoyh Hwujfisck - Combination unit with roller and grinding shoe - Rubberized contact roller 65 Shore - Contact roller diameter 160 mm - Electronic link pressure bar with segment width 35 mm. - Belt speed: 12 and 21 m/s - Tolerance compensation up to 1 mm - Suitable for veneered surfaces and solid wood. - Drive motor: 11 kW - Total connected load: approx. 28 kW - Operating voltage: 400 V / 50 Hz. - Compressed air consumption at 6 bar, 20 L/min. - Belt blow-off device per pressure surge 440 L/min. - Extraction volume: approx. 2,880 m3/h/ at 20 m/s - Extraction connection: Dedusting: 1 x Ø 160 mm (grinding unit, roller) 1 x Ø 160 mm (grinding unit, shoe) Dimensions: - Length: 1,700 mm - Width: 1,850 mm - Height: 2,100 mm - Location: not in stock - Available from April 2026

Condition: reconditioned (used), Year of construction: 2010, Voltage 400V 3~ 50Hz 7.22kW Control panel with LCD display and keypad Jointing unit with 2 counter-rotating diamond cutters Corner rounding unit for edge faces Manual unit adjustment Edge thickness 0.4-5.0 mm (optionally 8 mm) Workpiece height 8-60mm Djdpfx Afjyf I T Usiock Feed speed 11 m/min 3 free slots for finishing units Edge feed for coil and strip material Scraper knife

Condition: as good as new (ex-display), functionality: fully functional, Panel saw ALTENDORF HAND GUARD latest software 7/26 TwinFlex edition with 12" touchscreen, double sliding table, adjustable on both sides, manual parallel fence adjustment, parallel fence with fine adjustment, control panel at eye level, adjustable, dimension input via touchscreen, F 45 ElmoDrive control system, electric height adjustment, electric tilt adjustment, AKE tool clamping system, automatic correction of cutting height, when the saw unit is tilted, easy axis calibration, machine diagnostics, operating hour counter, USB interface, dust-proof ----- Technical data ----- Swivel range: 0 - 46 °, Cutting length: 3,000 mm, Cutting width: 1,000 mm, max. saw blade diameter: 450 mm, max. saw blade overhang: 150 mm, angle stop with fixed position: 90 °, manually adjustable via measuring scale: 3,200 mm, speeds: 3,000 / 4,000 / 5,000 rpm, motor power 400 V: 7.5 hp / 5.5 kW, screen size: 12 ", machine height: 91 cm Dcedpfx Afezgwl Ioisk Optical protection system: Two cameras collect data for hand recognition from a wide area around the saw blade. As soon as hands are detected in that area, the saw unit is quickly lowered and quickly stopped within a quarter of a second. EDITION TWINFLEX - Double sliding table 3,000 mm - Saw blade overhang 150 mm - Motor power VARIO 5 kW (6.8 hp) - Adjustable on both sides - Angle miter stop DIGIT LD, cutting length up to 3,200 mm - CNC parallel fence, cutting width 1,000 mm - On/off switch on the double sliding table - Template holder - Surcharge for motor power 6.5 kW (8.8 hp) ALTENDORF with VARIO, for adjustment on both sides - Scoring unit 2-axis, 2-sided, ALTENDORF with motorized height and side adjustment Scoring blade height programmable - Quick lowering and quick lifting, - Drive motor 0.75 kW (1 hp), 8,200 rpm. - Scoring system RAPIDO 180 mm ALTENDORF for adjustment on both sides - LED lighting on the scoring unit ALTENDORF - Double sliding table 3,400 mm, ALTENDORF - CNC parallel fence, 1,300 mm, ALTENDORF - Camera arm, can be swivelled out of the way ALTENDORF - Front support roller ALTENDORF Width 300 mm - Air cushion table ALTENDORF - Table extension 840 mm ALTENDORF with air cushion - HandGuard 2025 new version The machine is sold with a new warranty of 1 year. The machine can be purchased at an absolute special price. We would be happy to make you an offer.

Condition: new, Year of construction: 2023, New machine Year of manufacture: 2023 Partnership Edition Technical Specifications: Cutting height: vertical: 0–2,150 mm, horizontal: 80–2,000 mm Cutting length: 5,300 mm Cutting depth: 80 mm (55 mm with clamps) Saw blade: Diameter 303 mm, bore 30 mm, Z=60 hollow flat-top tooth Blade speed: 5,000 rpm Dsdpow I U D Ejfx Afieck Required air pressure: 6 bar Measurement readout for horizontal cuts: - via scale from 0–2,070 mm - via strip cutting fence from 75–500 mm Measurement readout for vertical cuts: - via scale from 0–1,300 mm Extraction connection: 1 x 100 mm, 1 x 120 mm Features: - ADVANCE clamping system, consisting of 2 pneumatic clamping grippers, motorized on vertical axes via a ball screw, moving from top to bottom. The grippers handle panels weighing up to 150 kg. - Torsion-free, free-standing machine frame - Round bar guides, vertical and horizontal - Pneumatically retractable slat bed - Fine-adjustable flip stop with extension - Fine adjustment for horizontal cuts via handwheel - Strip cutting fence - Manual programming rail with 5 T-slot nuts - Pneumatic immersion of the saw unit - 25 material support rollers - 1 infeed and 1 outfeed roller - Pneumatic workpiece clamping device between the support rollers - 3 intermediate support elements, pneumatically extendable - Pneumatic saw head locking - Control panel with documentation holder - Switch unit on the saw unit: start button, stop button - Tool cabinet - Scale illumination for vertical cuts Partnership Edition Features: - Digital display for the flip stop - Digital display for the saw unit with incremental mode - Pneumatically tiltable saw unit - Scoring system with controlled counter-air nozzle, numerical display for scoring or grooving depth setting, and activation indicator - 5.5 kW motor including star-delta starter - Cutting line laser Availability: Short-term Location: Flörsheim

Year of construction: 2025, condition: like new (used), functionality: fully functional, 2025 BCAMCNC 5 Axis CNC Router – Like New, Never Used Dsdsxddk Sopfx Afijck For sale is a 2025 BCAMCNC 5 Axis CNC Router, installed but never put into production. This machine is in as-new condition, making it an excellent opportunity to purchase a state-of-the-art 5 axis router without the lead times or cost of a brand-new unit. The BCAMCNC 5 Axis Router is designed for high-precision machining of complex parts, ideal for industries such as aerospace, automotive, furniture, marine, signage, mould making, and advanced composites. ✅ Key Features & Benefits 5 Axis CNC machining – full simultaneous interpolation for complex 3D parts Like new – installed but never used Heavy-duty welded frame for stability and long-term accuracy High-speed spindle for efficient cutting across a wide range of materials Automatic tool changer (ATC) for maximum productivity User-friendly CNC control with advanced software integration Vacuum table for secure workpiece holding Perfect for wood, plastics, composites, foams, aluminium and non-ferrous metals 📐 Technical Specifications (2025 BCAMCNC 5 Axis CNC Router) Table Size: 3000 × 1500 mm X-Axis Travel: 3000 mm Y-Axis Travel: 1500 mm Z-Axis Travel: 1200 mm A-Axis Rotation: ±120° C-Axis Rotation: ±360° continuous Spindle: 9kW High-frequency HSD (18,000 RPM) Tool Changer: 8 position automatic tool changer (ATC) Drive System: Servo motors with helical rack & pinion on X/Y, ball screw on Z Table: Vacuum table with powerful 7.5kW pump, multi-zone clamping Control System: Syntec 610MA-ES industrial CNC controller Max Cutting Speed: Up to 25 m/min Repeat Accuracy: ±0.05 mm Power Supply: 380V / 50Hz 📦 Included with Machine Full extraction-ready setup Includes tooling package Documentation & manuals 🌍 Condition Installed but never used – machine is like new 2025 model – latest generation technology Available immediately – no waiting times 🔑 Summary This is a rare chance to purchase a 2025 BCAMCNC 5 Axis CNC Router in unused condition. With full 5 axis capability, a heavy-duty structure, and precision control, it is the perfect solution for companies requiring high accuracy and productivity in machining complex 3D parts. Notes: *Specifications are given in good faith but not guaranteed*

Condition: used, Year of construction: 2021, MEGA 300 TS Numerical Control Panel height 60 mm PVC/Abs mm 3 Feed speed up to 22 m/min Working height adjustable electronically by C.N. Motorized rubber belt with higher pressure Introduction system for small panels Panel support guide with electronic adjustment by C.N. Side roller conveyor with idle wheels for panel support Anti-adhesive group Rectifier unit with two motors electronically adjustable by C.N. Roll holder plate for delicate edges Edge magazine with 2 positions Djdpfx Afst Hal Doisck Gluing unit for EVA glue with glue tank and pre-melter Edge pressure group on straight profiles with pressure rollers electronically adjustable by C.N Non-stick group Trimming unit with 2 motors with automatic inclination adjustment Trimming unit with 2 superimposed motors Trimming / gleaning group with 2 tilting motors electronically adjustable by C.N. Rounding unit with 4 motors Edge scraper unit electronically adjustable by C.N. Glue scraper unit Oscillating brush group Hairdryer group

Condition: as good as new (ex-display), Year of construction: 2026, Striebig CONTROL Type 6224 Cutting Area: L: 5300 x Hvertical: 2240 / Hhorizontal: 2100 x D: 80 mm Technical Data: Saw weight: approx. 1,200 kg Cutting depth: 80 mm Saw motor power: 5.5 kW (7.5 HP) Saw blade diameter: 300 mm Saw blade bore: 30 mm Emission sound pressure level at workstation LpA: 89.5 dB Saw blade speed: 4,800 rpm 2 extraction ports Ø 140 mm Compressed air connection: 6-10 bar Connected load: 7.3 kW (max 10.7 kW) Power supply: 3 x 400 V / 50 Hz Continuously adjustable scoring saw unit (VSA) Small parts made of aluminium Free-standing support complete, type: 6 ExpertCut Machine data provision (Industry 4.0 ready) Striebig Service Data Import / Label Layout Customized configuration of data import interface and label layout. The customer’s .csv file is checked and tested with the import drivers for cutting optimization. The label layout is adapted and prepared to customer requirements. Location: ex-stock 54634 Bitburg - Immediately available - Dcedpfxjy Ehnyo Afisk

Condition: used, machine/vehicle number: 007227, Position 1: Single Edgebanders HOMAG + LIGMATECH-KAL 310 + ZHR 05 Dcjdpfx Ajwuuc Aofiek Position 2: Panel Return Systems HOMAG + LIGMATECH-KAL 310 + ZHR 05

Condition: new, Year of construction: 2026, Size: 3 Nominal heat output: 87 kW -- Complies with German Federal Immission Control Act (BImSchV) Stage 2 and CE standards -- Combustion chamber completely lined with fireclay bricks Suitable for rooms of: 2,200 m³ (according to DIN) Fuel: Logs, chipboard, wood chips, wood chip briquettes Dcsdpfjdlhbpox Afijk Fuel consumption: 25 - 30 kg/h Blower air flow rate, free-blowing: 6,000 m³/h Outlet opening: Ø 500 mm Flue connection: Ø 200 mm Weight: 1,250 kg PLC control cabinet: 380 volts