EDGEBANDER HEBROCK F5 Next

HEBROCK F5 Next

Condition: new, Year of construction: 2025, The Hebrock F 5 If you want maximum performance, the Hebrock F 5 is the solution for edgebanding in demanding craft operations. The F 5 guarantees edgebanding in all steps, as it is equipped with all the components you need to meet your requirements: Joint trimmer, cross-cut saw, trimming unit, radius scraper, corner trimmer, surface scraper, fettling station. For even more flexibility on the way to the perfect finish, the F 5 can be optionally equipped with a practical multi-radius scraper. max. edge thickness: 3 mm Max. workpiece thickness: 50 mm Ready for operation in 3.5 min Equipment: Hebrock F5 Next - 10 m/min Edge banding machine F5 Next With PLC control (incl. touchscreen) and with hot-melt glue application to the workpiece for edgebanding material up to 3 mm; jointing cutter (incl. slide tool) up to 2 mm cutter depth, maintenance-free glue tray with change tray pre-equipment incl. glue discharge device, HF cross-cut saw station (approx. 12000 rpm), HF trimming station (approx. 12000 rpm) with separate pneumatic routing adjustment and exchangeable panel router (combination version), corner rounding router, radius scraper, surface scraper (incl. pneumatic lift), cleaning station, robust chain drive, ball bearing mounted double roller top pressure, viewing window from the rear of the machine, extendable workpiece support, feed rate approx. 10 m/min. F5/08/4 Quick-change attachment for corner router Kjdsi Anadepfx Aayjlr F5/08/5 additional exchangeable motor corner router with tool assembly F5/09/4 Multi-radius scraper (R1/R2) F5/24/1 Spraying device for release agent F5/24/2 Spraying device for cleaning agent F5/25 Edge spraying device F5/27. nesting for router and radius scraper F5/30. Pneumatic 3-point adjustment (radius, chamfer, flush trimming) Location: ex stock 54634 Bitburg Available in calendar weeks: 4/2024

Condition: new, Year of construction: 2025, Martin T 54 jointer Only with a good surface planer can you create truly perfect foundations. The T54 was developed with precisely this objective in mind. It enables you to easily plane workpieces at the most modern level and to safely provide them with angular edges. The machine is equipped with a TERSA solid steel cutterhead as standard. The Xplane cutterhead, which operates with a drawing cut, is available as an optional extra. Planing bevels is effortless, as any angle between 90° and 45° can be quickly adjusted with the user-friendly one-hand adjustment. The solid cast iron tables of the T54 provide secure support even for large, heavy workpieces. If you need even more support, you can extend both the infeed and outfeed tables by 380 mm each - of course also in cast iron. Technical data table width: 500mm Table length: 2840mm Maximum chip removal: 8mm cutter: diameter 125mm, 5000 rpm, Tersa Z4 Speed: 5000 rpm Huyjm0s Motor power: 5,5kW Fence adjustable up to 45 Auxiliary ruler for small workpieces Table adjustment motorized Equipment: Kodpjpq If Dofx Aayolr T 54 T 5462-a Suvamatic T5406/3-a solid steel cutterhead Xplane with 3 spiral knife rows (26 cambered carbide knives per row; 2 counter knives), delivery includes full knife equipment as well as a T-wrench Torx T20; shaft speed 6,000 rpm included. The emission sound pressure level LpA during machining is reduced by 8 dB(A). Location: ex stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2025, Edge Banding Machine F5 with PLC control (incl. 15" touchscreen), hot melt adhesive application to the workpiece for edge materials up to 3 mm: Joint trimming unit (incl. DIA tool) up to 2 mm trimming depth, Kledpfx Aeh Hl Aysayer maintenance-free glue pot with changeable pot setup, incl. adhesive discharge device, HF milling station with pneumatic adjustment, incl. corner rounding unit, radius scraper, surface scraper (incl. pneumatic lifting device), cleaning station, jointing head Whispercut, combination milling head, radius milling cutter R=2mm, radius corner milling cutter R=2mm, quick-change system for corner milling cutter, radius changeover motor R=1mm, multi-radius scraper R1/R2, undercarriage, spraying device for separating agent (PUR), spraying device for cleaning agent (PUR), pneumatic 3-point adjustment, LED lighting, INCLUDES 2nd interchangeable glue pot, max. edge thickness 3mm, workpiece thickness 8-50mm, min. workpiece length approx. 160mm, feed speed 10m/min, ready for operation in approx. 3.5 min, dimensions approx. 4300x1300x1400mm (LxWxH), weight approx. 900kg, extraction nozzle 1 x 140mm

Condition: new, Technical data: Ksdpfx Aasgtm U Ajyolr Working width: 1100 mm Sanding belt dimensions: 1120x2150 mm Max working height: 160 mm Calibrating steel roller with a diameter of 150 mm Rubber roller with a diameter of 150 mm Sanding pad width: 50 mm Common motor power of 2 grinding aggregates: 11 Kw Speed of sanding belts: 16/18 m / s. Feed motor power: 0.55 kW Infinitely adjustable feeding belt: 4-20 m / min Worktable motor power: 0.25 Kw Pneumatic shoe for jump / jump: YES

Condition: new, Year of construction: 2026, Technical specifications: • Extraction capacity ~ 5200 m3/h • Motor power 3.0 kW • Speed 3000 rpm • Voltage 400V, 50Hz • Suction connection 250/200mm • Filter area 13.7 m2 • Speed 28m/sec. • Number of filters 28 • Dimensions 752 x 1982 x 2144 mm • Weight 300kg • Category of filters G • Polyester filter material • Noise 80 dB without connection, 65 dB when connected to the machine via a pipe Delivery: - Fulfill H-2 Norms - 5 micron polyester filter - 2 containers - Running gear - Filter cleaning using a controlled vibration system Ksdpfx Aasd H Rf Teyjlr + 850 euros for the models with fire extinguisher (Safe System)

Condition: good (used), Year of construction: 2021, Used edgebander SCM Olimpic K360 - 11 m/min - 8 - 60 mm panel thickness - 0.4 - 6 mm edge thickness - machine length approx. 4,200 mm - weight approx. 1,200 kg - immediately available - few operating hours/metres (see photo) Kjdpfjyrrpmox Aayslr If you have any questions, please let us know.

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, feed length X-axis: 4,200 mm, feed length Y-axis: 1,600 mm, Homag Centateq E-310 / Profi BMG 310/42/16/F/V/K Prepared for one main spindle with gluing unit, mounted to the right of the gantry crossbeam. 5-axis main spindle, 12 kW Drilling head with 31 spindles: 21 vertical and 10 horizontal Grooving saw blade, tiltable 90° Blowing nozzle for 60 mm edge Circular tool magazine for 32 tools, HSKF63 Linear tool magazine with 8 positions Circular magazine with 10 positions Power Edge Pro Duo gluing unit Safety control with bumper Chip conveyor Ksdpfx Aaox Irzceyelr Vacuum pump PowerTouch, WoodWop control software

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, 10 cup wheels vertical glass edging machine with variable angle 0-45° actual running meters : 260.000 min. glass size : 40 x 40 mm glass thikness : 3 - 55 mm speed : 0,4 - 6 m/min. voltage : 400 V 50 Hz 39 A weight : 4600 Kg Kodpfow U Ddusx Aayslr

Condition: new, Year of construction: 2025, The Hebrock F 2 The 3.3 m long F 2 is not only inexpensive and space-saving. It also has the equipment you need to process perfect edges right from the start: diamond-tipped jointing cutters guarantee excellently prepared workpieces for edging. The equipment includes a jointing unit (up to a milling depth of 2 mm), the top-mounted fast heating glue container, cross-cut saw and combination router. Optionally, the F 2 can also be equipped with a surface scraper. max. edge thickness: 3 mm max. workpiece thickness: 50 mm Ready for operation in 3.5 min Equipment: Kodpfjlht Hzsx Aayjlr F2 - 10 m/min Edge banding machine F2 next With PLC control (incl. touch screen) and hot-melt adhesive indication to the workpiece for edgebanding material up to 3 mm; jointing cutter (incl. slide - tool) up to 2 mm milling depth, maintenance-free glue basin with exchangeable basin pre-equipment incl. adhesive discharge device, HF cross-cut saw station (approx. 12000 rpm), HF-milling station (approx. 12000 rpm) with separate pneumatic milling adjustment and interchangeable plate cutter (combi design), robust chain drive, ball bearing mounted double roller top pressure, viewing window from rear side of machine, extendable workpiece support, feed rate approx. 10 m/min. F2/10 undercarriage F2/30 pneumatic 3-point adjustment (radius- ,chamfer-, flush milling)

Condition: new, Year of construction: 2026, Max. edge thickness 3 mm (optionally up to 8 mm) Min/Max. work piece thickness 8–60 mm* Min. workpiece length approx. 200 mm* Min. workpiece width approx. 80 mm* Feed speed approx. 10 m/min. Ready to operate approx. 6 min. Power consumption max. approx. 14 kW Electrical connection 400 V – 3 Ph – 50 Hz Machine dimensions 5,250 x 1,230 x 1,430 mm (LxWxH) Weight approx. 1,700 kg pre-milling head Whispercut radius for corner rounder R = 2mm Ksdpfxeg Tu Rks Aayelr heatable infeed fence quick change device f.motor corner rounder change motor for corner rounding unit including HM profile cutter radius for change motor R = 1mm Radius Multi-Radiusscraper R2/R1 wheels release agent spraying unit cleaning agent spraying unit protection spraying edge nesting pneumatic 3-point adjustment