Used Hebrock Top 2000 for sale (48)

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: 2459, Machine in very good condition - Very user-friendly control panel - Minimum workpiece width approx. 80 mm - Minimum workpiece length approx. 200 mm Iisdpfx Acjx Ahmuj Ajk - Feed rate approx. 10 m/min - Transport chain with firmly bolted special chain plates - Double roller top pressure - Machine length 4,300 mm - Machine width 1,400 mm - Weight approx. 1,250 kg - Extendable workpiece support at the front - Automatic central lubrication for cross-cut saw & corner milling unit - Melt glue container with Teflon coating (very low maintenance) - Ready for operation after approx. 5-6 minutes - Jointing unit - Pneumatic trim roller cutter - Direct glue application to the workpiece - Trimming unit for front & rear edges - Flush/chamfer/radius milling unit - Corner rounding - Surface scraper with dual sensing

Condition: used, Hebrock AKV 3005 edge bander, well-equipped, can be tested before purchase, Liquids before milling units, Pre-milling cutters, Glue application with roller, equipped with glue drain, Second glue pot included, pneumatic pre-cut guillotine, pressure rollers, final trim saw, milling unit top/bottom, R1 – R2 pneumatically adjustable, profile scraper, corner rounding unit, liquids before scraper, flat scraper, Iiedpfew I Sp Sjx Ac Ask polisher, max edge tape thickness in roll: 3mm, max edge thickness for lipping: 12mm, machine in very good condition.

Condition: used, Year of construction: 2007, machine/vehicle number: Werksüberarbeitungsnummer: WÜA1363DK-F7560, Used Machine GM020.0068 Iijdpfxew Nih Io Ac Ask AKV 3003 DK - F Year of manufacture: 2007 Specification: 3 mm 1st milling station: Combination Surface pull scraper with extraction Chassis Pneumatic milling adjustment Limit switch lever, 7.5° inclination

Condition: excellent (used), Year of construction: 2024, operating hours: 650 h, Edge Banding Machine with PLC control system (incl. 15“ touch screen) and glue application to the workpiece for edge band material up to 3 mm: pre-milling (DIA-tools incl.) up to max. 3 mm milling depth, maintenance-free and coated quick heating pot with preliminary setup for change over quick heating pot (incl. hot-melt glue changing device), HF-trim saw station (approx. 12,000 rpm),HF-milling station (approx. 12,000 rpm) with pneum. milling adjustment, 2nd HF-milling station (approx. 12,000 rpm, incl. pneum. disengagement), corner rounding unit1), radius profile scraper, surface scraper (incl. pneum. disengagement), cleaning station, groove saw (incl. pneum. disengagement), robust chain drive, double roller top pressure (ball bearing supported), windows for aggregates from machine back side and operator side, indicating lamp for workpiece sequence, extensible support bar to the front, band feed approx. 15 m/min, gluing up to 60 mm workpiece thickness. Optional things installed on the machine Quick change device for corner rounding Multi-Radiusscraper (R2/R1) Heatable infeed fence Wheels Release agent spraying unit (spraying workpiece) Cleaning agent spraying unit (spraying workpiece) Protection spraying edge Nesting Pneumatic 3-point adjustment Iedpfxexn Nvbj Ac Asik Multiool for HF-milling station Airtronic (up tp 40 mm workpiece thickness) Axis package (motor driven adjustments of height, edge and premilling) Glue pot suction hood The machine is on stock!

Condition: new, Year of construction: 2022, functionality: fully functional, Edgebanding machine Hebrock F5 equipped with a PLC control system. It features a maintenance-free, coated rapid-heating glue pot, with pre-set configuration for quick pot changeovers. - 10” touchscreen display - Maximum edge thickness: 3 mm Ijdpfx Acjwyu Rwj Aeik - Minimum workpiece length: 160 mm - Feed speed: 7 m/min - Ready for operation in approx. 3.5 min - Maximum power consumption: 7.4 kW - Electrical connection: 400V / 3-phase / 50Hz - Table height: 900 mm - Machine dimensions: 4300 x 1300 x 1400 mm - Approximate weight: 900 kg Options/Extras: • Whispercut pre-milling unit, workpiece height up to 50 mm • Combi cutter head • Corner rounding radius: R = 2 mm • Radius corner rounding: R = 2 mm • Quick change system for corner rounding motor • Multi-radius scraper R2/R1 • Release agent spraying unit • Cleaning agent spraying unit • Edge protection spraying unit • Nesting function for milling unit and radius profile scraper • Pneumatic 3-point adjustment • Multi-tool (R2/R1/chamfer) • Integrated LED workspace lighting

Condition: good (used), Year of construction: 2003, I sell the radius milling machine HEBROCK HFF08, Year 2003. Suitable for curved shaped edges Good condition, possible to test ! Iisdewun H Uspfx Ac Aek Possible to buy also the Radius edge banding machine AKV88D.

Condition: good (used), Year of construction: 2005, Brand: Hebrock Model: HFF 08 Machine no: 08/379 Year model: 2005 Iiodpfxoq H Spvo Ac Ask Edge cutter for simultaneous upper and lower radius/clean milling of excess edging material on workpieces with straight edges and on rounded workpieces with internal and outside radii. Tech data: Max edging thickness: approx. 3mm Max workpiece height: 50mm Inner radius min: 40mm Milling motor: 12000 Rpm Work table height: 865mm Max 6 bar Chipboard: 120mm Milling motor: 0.37Kw Motor: 1.5Kw, 50Hz, 400V 3-phase Stock no: 2001922

Condition: excellent (used), Hebrock F4 Edgebander Well-equipped, possibility to inspect before purchase. Pre-milling cutters, Glue application by roller, Equipped with glue drain, Interchangeable glue pot Pneumatic pre-cut guillotine, Pressure rollers, Trimming saw for final cut, Top and bottom milling unit, R1–R2 pneumatically adjustable, Profile scraper, Corner rounding unit, pneumatically adjustable, Flat scraper, Max workpiece height: 50 mm, Max edge band thickness in roll: 3 mm, Feed speed: 7 m/min, Power requirement: 7.4 kW, Iiodpexq A Ebjfx Ac Aok Machine inspected, ready for testing, in very good condition. Only 5,000 meters of use. Leasing purchase possible.

Condition: used, Year of construction: 2005, machine/vehicle number: Werksüberarbeitungsnummer: WÜA920DK-F12960, Used machine GM020.0029 Year of manufacture: 2005 AKV 3005 DK-F 8 mm version 1st milling station: Combination Cleaning station Corner rounding cutter Jointing cutter Surface scraper with extraction Profile scraper Chassis Pneumatic milling adjustment SPS control Iodpfx Ajw In R Ejc Aeik Preparation for interchangeable tanks

Condition: new, Year of construction: 2024, Max. edge thickness 3 mm (optionally up to 8 mm) Min/Max. work piece thickness 8–60 mm* Min. workpiece length approx. 200 mm* Iiodpfjg Tu Rkox Ac Aok Min. workpiece width approx. 80 mm* Feed speed approx. 10 m/min. Ready to operate approx. 6 min. Power consumption max. approx. 14 kW Electrical connection 400 V – 3 Ph – 50 Hz Machine dimensions 5,250 x 1,230 x 1,430 mm (LxWxH) Weight approx. 1,700 kg pre-milling head Whispercut radius for corner rounder R = 2mm heatable infeed fence quick change device f.motor corner rounder change motor for corner rounding unit including HM profile cutter radius for change motor R = 1mm Radius Multi-Radiusscraper R2/R1 wheels release agent spraying unit cleaning agent spraying unit protection spraying edge nesting pneumatic 3-point adjustment

Condition: new, Year of construction: 2021, functionality: fully functional, Edgebanding machine Hebrock K36 featuring PLC control, a maintenance-free and coated quick-heating glue pot, including pre-setup for rapid glue pot changeover. - 10" touchscreen interface - Maximum edge thickness: 3 mm - Minimum workpiece length: 200 mm - Minimum workpiece width: 80 mm - Feed speed: 10 m/min - Ready for operation in approx. 5 min - Maximum power consumption: 14 kW - Electrical requirements: 400V / 3-phase / 50 Hz - Machine dimensions (LxWxH): 5250 x 1230 x 1430 mm - Approximate weight: 1700 kg Additional Equipment/Options: • Whispercut pre-milling cutter, 60 mm workpiece height • Heatable infeed fence • Radius unit for corner rounding, R = 2 mm • Quick-change device for corner rounding motor • Multi-radius scraper (R2/R1) • Corner rounding for 60 mm workpiece height • Release agent spray unit • Cleaning agent spray unit • Edge protection spray system • Nesting package • Pneumatic 3-point adjustment • Multi-tool (R2/R1/chamfer) • Interior LED lighting • Equipment for short parts processing • Preparation for return system (barbaric) Ijdpfxowyu E Uo Ac Asik • Axis package: motorized adjustment of height, edging, and pre-milling units • Additional workpiece infeed and outfeed supports (each 450 mm)

Condition: good (used), Year of construction: 2002, I sell the edge banding machine HEBROCK AKV088D, Year 2002. Suitable for curved shaped edges Iiedpfsvx D Auex Ac Ajk Good condition, possible to test ! Possible to buy also the Radius milling machine HFF08.

Condition: ready for operation (used), Year of construction: 2004, Brand: Hebrock Model: AKV 83 F Year of manufacture: 2004 Machine no: 10759 Technical data: Workpiece thickness: from 10 - 50 mm Feed speed: 3 - 4 m/min Electrical connection: 220/380 Volt, 50 Hz. Power: 3 KW Dimensions: 1750 x 800 x 1250 mm (complete) Weight: approx. 95 kg. Heating: 3 KW, with stepless electronic temperature control, 0 - 650 degrees C Motor: 3.5 kW Iisdpfx Aceu Racxj Aek Stock no: 2002311BXA

Condition: new, Year of construction: 2025, HEBROCK Edge Bander F2 next with SPS control system (incl. touchscreen) and hot-melt glue application to the workpiece for edge material up to 3 mm: pre-milling unit (incl. DIA tool) up to 2 mm milling depth, maintenance-free glue pot with preparation for interchangeable tank incl. glue discharge device, HF cross-cut saw station (approx. 12,000 rpm), HF milling station (approx. 12,000 rpm) with separate pneumatic milling adjustment and indexable insert cutter head (combi version), robust chain drive, double roller upper pressure with ball bearings, inspection window on the rear of the machine, extendable workpiece support, feed rate approx. 10 m/min. Including: F2/500/10 Whispercut pre-milling head F2/500/20 Combination milling head Iedpfx Ajwmdbroc Ajik F2/500/2 Radius cutter R=2mm F2/12 Surface scraper (incl. pneumatic lift)

Condition: new, Year of construction: 2025, Edge Banding Machine F5 with PLC control (incl. 15" touchscreen), Iisdpfxoh Hl Ayo Ac Aok hot melt adhesive application to the workpiece for edge materials up to 3 mm: Joint trimming unit (incl. DIA tool) up to 2 mm trimming depth, maintenance-free glue pot with changeable pot setup, incl. adhesive discharge device, HF milling station with pneumatic adjustment, incl. corner rounding unit, radius scraper, surface scraper (incl. pneumatic lifting device), cleaning station, jointing head Whispercut, combination milling head, radius milling cutter R=2mm, radius corner milling cutter R=2mm, quick-change system for corner milling cutter, radius changeover motor R=1mm, multi-radius scraper R1/R2, undercarriage, spraying device for separating agent (PUR), spraying device for cleaning agent (PUR), pneumatic 3-point adjustment, LED lighting, INCLUDES 2nd interchangeable glue pot, max. edge thickness 3mm, workpiece thickness 8-50mm, min. workpiece length approx. 160mm, feed speed 10m/min, ready for operation in approx. 3.5 min, dimensions approx. 4300x1300x1400mm (LxWxH), weight approx. 900kg, extraction nozzle 1 x 140mm

Condition: new, Year of construction: 2025, Space-saving with excellent specifications. Your entry point into edgebanding could not be better, as the 3.3m long F2 is both cost-effective and space-saving. And it also has the specifications you require to process perfect edges right from the word go – diamond-tipped cutters guarantee superbly prepared workpieces for edging. The specifications include pre-milling aggregate (up to 3 mm), the top-side fast-heating glue pot, trim saw and combicutter. The F2 can also be optionally fitted with a surface scraper. Get started into perfect edgebanding! Max. edge thickness: 3mm Min./max. workpiece thickness: 8–50mm Min. workpiece length: approx. 160mm Feed speed: 10 m/min. Ready to operate: approx. 3.5 min. Power consumption: ∅ approx. 5.9 kW Electrical connection: 400 V/3Ph/50Hz Table height: approx. 900 mm Isdpfx Aceglfw No Asik Machine dimensions: approx. 3,350 x 1,300 x 1,400 mm (LxWxH) Weight: approx. 620 kg Exhaust connection: ∅ 1x140 mm Surface scraper (incl. pneumatic disengagement)

Condition: new, 3 mm Iiodpfovwd Uuex Ac Ask Total length 4122 mm Feed speed 10 m/min. with PLC control (incl. touchscreen) and hot-melt adhesive application to the workpiece foredgebanding material up to 3 mmjointing cutter (incl. DIA tool) up to 2 mm cutter depth1),maintenance-free glue tray with change tray pre-equipment incl. adhesive discharge device,HF cross-cut saw station (approx. 12,000 rpm),HF trimming station (approx. 12,000 rpm) with separate pneumatic trimming adjustment andchange plate trimmer (combined version),corner rounding cutter,surface scraper (incl. pneumatic discharge device) with separate pneumatic trimming adjustment andchange plate trimmer (combined version),corner rounding cutter) with separate pneumatic routing adjustment andinterchangeable plate router (combi version),corner rounding router,surface scraper (incl. pneumatic lift-out),free space (for cleaning station or radius scraper),robust chain drive,ball bearing mounted double roller top pressure,viewing window from rear of machine,pull-out workpiece support,feed rate approx. 10 m/. No. F4/00/11- Joining head WhispercutF4/500/10- Combination milling headF4/500/20- Radius milling cutter R=2mmF4/500/2- Radius corner milling cutter R=2mmF4/08/2- Quick-change equipment for corner milling cutterF4/08/4- Radius scraper (incl. F4/09- Radius radius scraper R=2mmF4/09/2- ChassisF4/10- Pneumatic 3-point adjustment(radius, chamfer, flush milling)F4/30

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, Edge banding machine with jointing cutter (incl. DIA tool), with PLC control (incl. touch screen) with hot-melt glue application to the workpiece for edgebanding material up to 3 mm: maintenance-free, coated gluing bowl with exchangeable bowl preparation, HF cross-cut saw station (approx. 16,000 rpm) for front and rear edge overhang, HF trimming station (approx. 16,000 rpm) with exchangeable panel trimmer (combination version), router fine adjustment from the operator's side (Hebrock system), Corner rounding cutter (minimum workpiece length 300 mm, max. workpiece thickness 40 mm), surface scraper incl. pneumatic lifting, robust chain drive, double roller top pressure, unit viewing window from the machine rear and operator side, extendable workpiece workpiece support, feed approx. 10 m/min, 60 mm workpiece thickness, Iodpfsl H E H Hex Ac Aeik incl. 1x exchangeable basin incl. chassis

Condition: good (used), Year of construction: 2005, Brand: Hebrock Model: AKV 88 D Machine no: 569-P3 Year model: 2005 Tech data: Max edging thickness: approx. 3mm Max working height: 50mm Iisdpfxjq Ihxpe Ac Ask Inner radius min: approx. 8mm Feed speed 0-7 m/min Warm-up time: approx. 6.5 min Motor: 9.3Kw, 50Hz, 400V Machine size (lxwxh): 1360x690x1220mm Weight: approx. 150Kg Stock no: 2001921BXA

Condition: ready for operation (used), functionality: fully functional, overall weight: 800 kg, working height: 870 mm, power: 11 kW (14.96 HP), workpiece width (max.): 70 mm, Technical data: max. edge thickness: 5mm / 8mm max. workpiece height: approx. 40mm / 50mm Iisdjug Uqajpfx Ac Aok min. workpiece height: approx. 250mm / 300mm min. Workpiece width: approx. 70mm Feed speed: approx. 11m/min Ready for operation: approx. 4.5 min Power consumption: approx. 11kW Electrical connection: 230/400V / 50/60 Hz Work table height: 870mm Dimensions (LxWxH): 4100x1400x1300mm Condition and details see pictures

Condition: like new (used), Year of construction: 2020, functionality: fully functional, height adjustment type: mechanical, input voltage: 400 V, space requirement height: 1,200 mm, Edgebander equipped with: calibrators, edging material magazine, interchangeable hotmelt glue pot for EVA or PUR, flush trimming, rounding trimming units. Ijdpfxswy Ugxo Ac Aoik

Condition: used, Year of construction: 1994, for pre-coated edges including a lot of edge material with outriggers on both sides end cap station 3-roller feed used, good condition Make Hebrock Type AKV-83 Year of construction 1994 Edge band thickness 1.0 mm Workpiece height max. 50 mm Workpiece width min. 50 mm Workpiece length min. 170 mm Ijdpfsvwfzvjx Ac Aeik Space requirement approx. 1700 mm x 690 mm x 500 mm Storage location 97447 Gerolzhofen, freely loaded, unpacked Handover in the current condition as seen, without guarantee and guarantee

Year of construction: 1995, condition: ready for operation (used), machine/vehicle number: 585, Brand: Hebrock Model: AKV 1000 V Machine no: 585 Year of manufacture: 1995 Tech. data: Edgeband thickness max: 3 mm Edgeband height max: 50 mm Max feed speed: 7.5 m/min With cutting knife Length of work table: 2200 mm Motor: 7 kW, 50 Hz, 230/400V, 3-phase Size for transport: Length: 220 cm Width: 115 cm Height: 150 cm Iiedpeib H Slefx Ac Aok Stock no: 2001164BXM