Used Haffner Kf 20 for sale (35)

Condition: used, Used machine Equipment and technical data: Dusdpfxjyklfxo Aa Nst Lift left/right: 150 mm, Lift up/down: 150 mm Motor: 1.5 kW with chain Availability: short-term Storage location: Röllbach

Condition: used, Year of construction: 1980, Used machine Condition: various small defects without chains Equipment and technical data: Stroke left/right: 150 mm, Top/bottom stroke: 150 mm Duodsw I U Nhepfx Aa Not Motor: 1.5 kW Can be used as a spare parts carrier Availability: short term Location: Flörsheim

Condition: used, used, good condition, hardly runmanufactured by Haffnertype KF 20stand machinechain set 40 x 150workpiece restlubricant unit1 x mechanical workpiece clampingrequired space ca. l x w x h mm600 x 800 x 2000total connected power 1,7 kWlocated in  97447 Gerolzhofensale in current condition as seen- free on truck - Dujdpfsvwgayjx Aa Net

Condition: excellent (used), functionality: fully functional, Chain Mortiser/Chain Chisel KF20, with several chains, very good condition, 1.7 kW, 380 Volt. Machine subject to differential taxation. Dsdpfsxf Hzijx Aa Njut

Condition: used, Year of construction: 1938, Machine cleaned, function tested, trial run incl. various chain sets Used, good condition, low hours Manufacturer: Haffner Type: KF20 Year of manufacture: 1978 Machine no.: 20378 Column-type machine + undercarriage Chain set 12-17 / 50 x 175 J3 Door support Space requirement approx. 750 x 800 x 2000 mm Duodsythcfopfx Aa Nst Weight approx. 200 kg Location: 97447 Gerolzhofen, free on truck, unpacked Delivery as seen, without any warranty or guarantee

Condition: good (used), Technical Specifications: Dujdswm Dlkopfx Aa Njt Motor: 1.5 kW Three-phase voltage: 220/380 V / 50 Hz Speed: 2800 rpm Max. mortising depth: 150 mm Max. slot length: approx. 170 mm Max. chain width: 40 mm Max. longitudinal table travel: 160 mm Max. transverse table travel: 90 mm Incline: 5 degrees Weight, machine: 72 kg Weight, stand: 35 kg Approx. dimensions: (HxWxL): 190 x 54 x 60 cm

Condition: used, used manufactured by Haffner type KF20 wall machine workpiece rest lubricant unit total connected power 1,5 kW located in  97447 Gerolzhofen sale in current condition as seen. Dedpfx Asvwf T Eea Nsut Without repair work. Pickup in the short term. - free on truck -

Condition: good (used), Type KF-30 In good condition Manual Motor 1,7 kW Dsdpfx Asdrq Svsa Nsut Tiltable Chain width 18 mm Made in Denmark Transport dimensions 700х700х1800 mm

Condition: good (used), Router, router, hand router -Handover: in current condition as seen -Accessories: collet, but without clamping nut, depth stop Djdpfxeb A N Nme Aa Nout -Speed: 12000 rpm -Rated consumption: 800 watts -Connection: 230 volts -Dimensions: 320/320/H320 mm -Weight: 12kg

Condition: good (used), functionality: fully functional, Door lock milling machine SL 100 - with milling motors for faceplate and handle - with pneumatic clamps - 1.7 kW Dsdpfx Aaoygm Awj Njut Transport available at extra cost!

Condition: good (used), Code: 0370 Brand: HAFFNER - GERMANY Model: DGS 187 - CE Standard Double mitre saw with tilting blades for cutting wood, aluminum, pvc and various materials - CE Standard Technical data: Blades diameter mm 500 F 30 N° 2 motors each Kw 2,2 - Rpm 2800 Cutting length max mm 3400 Cutting length min mm 230 Blades inclination 45° - 90° Duedpfx Aajuiwqhs Net Electronic positioning cutting length of left cutting unit Hydropneumatic saw feed Pneumatic workpiece clamping Control panel double buttons Electronic head positioning programmer N° 2 suction ports diameter mm 120 Compressed air 6 bar Overall dimensions mm 4600 x 1300 x 1650 h Weight kg 550

Condition: excellent (used), Year of construction: 1998, Haffner Door Lock Mortising Machine used, in good condition Manufacturer: Haffner Model: SL 100 Machine No.: 5372 Column-type machine Chain mortising unit Door support Workpiece support Dsdpfsyuty Sex Aa Nout Spindle for lever hole Spindle for faceplate Lubrication device Extraction port D 80/100 mm Required space approx. 1200 mm x 700 mm x 2000 mm Weight approx. 300 kg Location: 54634 Bitburg Delivery in as-inspected condition, without warranty or guarantee

Condition: good (used), Year of construction: 1989, HAFFNER 919 Power Feeder with 6 Rollers and 8 Speeds Number of rollers: 6 pcs Roller dimensions: 110x50x35 mm Number of speeds: 8 Description HAFFNER power feeder 6 rollers 8 speeds Reach approximately 800 mm Location: ex stock 54634 Bitburg - Immediately available - Dedpfxjyza A Us Aa Njut Subject to prior sale

Condition: excellent (used), 1.1 kW motor Two pneumatic clamps Djdpfsy Avgxex Aa Nout

Condition: excellent (used), Motor 1.3 kW x2. 45-degree angles. Cutting height 11 cm. Cutting width 15 cm. Cutting length 340 cm. Pneumatic. Djdpoy Af Tusfx Aa Njut

Condition: excellent (used), Model: SL 100 Required space approx. 1200 mm x 800 mm x 2000 mm Weight approx. 300 kg Dujdpfeyz U Ulex Aa Nst

Condition: used, Year of construction: 1980, Used machine Year of manufacture: 1980 Features and technical data: Duedpfsyq T Ibox Aa Net - Lock case milling unit - Handle hole borer - Face plate milling cutter - 1.5 kW motor - 2800 rpm Availability: short-term Location: 63934 Röllbach

Condition: used, Year of construction: 1980, functionality: fully functional, power: 4 kW (5.44 HP), cutting height (max.): 80 mm, saw blade diameter: 300 mm, total width: 5,750 mm, total height: 2,160 mm, The Haffner panel saw model SP 223 is still fully operational and in use. It is a vertical panel saw machine. Technical data (saw blade): For the SP 223 model, a saw blade with a diameter of 300 mm and a 30 mm bore is recommended. Dimensions: L = 5750 mm, H = 2160 mm. Cutting depth: 80 mm. Motor power: 4 kW, 5.5 HP. Dujdpfx Aoywh R Eea Nst

Condition: used, used, in good condition with new feed rollers, 6 rollers manufacturer Haffner type 919 machine no. 32728 motor: pole-changing, 2 speeds, 1.1 / 1.5 kW roller diameter 110 mm roller width 50 mm feed rollers: 6 pcs Dujdpsyt R N Ijfx Aa Njt with stand 8 speeds, 4 switchable location: 97447 Gerolzhofen, loaded free on truck, unpacked delivery in as-is condition, as inspected and tested, no overhaul, no warranty or guarantee

Condition: used, Year of construction: 2000, functionality: unexamined, input voltage: 400 V, type of input current: three-phase, saw blade diameter: 500 mm, rotational speed (max.): 2,850 rpm, rotational speed (min.): 2,850 rpm, air pressure: 6 bar, pressure: 6 bar, saw blade speed: 2,850 rpm, We are offering this used Haffner DGS 187 double mitre saw, year 2000, including 2 new saw blades. Type: DGS 187 Serial number: 0103 Voltage: 400 V Frequency: 50 Hz Current: 20 A Operating pressure: 6 bar Air consumption per cycle: 8.0 l Max. saw blade Ø: 500 mm Speed: 2850 rpm If you have any questions or require more information, please feel free to send us a message or give us a call. Dujdpfxsyn U Aze Aa Not

Condition: good (used), Door lock cutter Three separate motors are available for processing the lock body Dsdpfeurf Nxex Aa Neut Horizontally and vertically adjustable for different locking systems You can call or write to us. We can speak and write German and Russian. You can also send messages in English 12.6.2

Condition: good (used), Double-end tenoner, edge processing machine, scoring motor, cutting motor, electric motor, spindle motor, milling motor Duodjku Hrropfx Aa Net -Manufacturer: Haffner, milling motor type M 30 -Power: 300 W 17000 rpm -Voltage: 200 V 300 Hz -Dimensions: 240/70/90 mm -Weight: 2.5 kg

Condition: used, Year of construction: 1995, cutting width 375 mm Cutting height 150 mm dimensions of saw-blade 500 x 30 mm Motor output 2 x 3 kW Cutting length 5100 mm speeds 2800 U/min air pressure 6 bar weight of the machine ca. 700 kg dimensions of the machine ca. 6100 x 1450 x 1450 mm * Profile support plate made of steel * Stable cast construction of the saw unit * Large cutting range, 2 profiles can be cut at the same time * Easy adjustment of the moving unit with roller guides * Double storage of the swivel device * Safe clamping thanks to the two-pressure system * Double saw feed guide Dodstv Rgrepfx Aa Neut * Hydropneumatic saw feed * External dimension correction scale * Left saw unit fixed * Swivel range 45°-90° * Including suction (without piping) ALKO Mobil-Jet 100 year of manufacture 2002

Year of construction: 2008, condition: used, For aluminum and PVC profiles Max. milling diameter: 180 x 30 mm Max. Profilhöhe: 95 mm Hub: 325 mm Pneumatic material clamps Manual feed minimum quantity spraying Dedsx Nm Imepfx Aa Njut Weight: approx. 150 kg

Condition: excellent (used), Saw Machine Haffner KL-176 Dedpfx Ajfk I U Rsa Nsut