Used Height Measuring Device for sale (44,329)

Condition: ready for operation (used), Year of construction: 2008, machine/vehicle number: 6851350, Resolution (Z) 0.38 µm (175 mm) / 0.19 µm (350 mm); system: 0.04 µm Contact speed (Z) 0.1 – 1 mm/s Positioning (X/Z) X: 0.2 – 8 mm/s; Z: 0.2 – 10 mm/s Measurement speed 0.2 – 4 mm/s Measuring length (X) 0.2 – 120 mm Measuring range (Z) 50 mm Arms 175 mm, 350 mm Guideway deviation < 1 µm / 120 mm Stylus radius 25 µm Measuring force 1 – 120 mN Additional features Automation, protective elements, advanced calibrations, user safety Iodew S Egxspfx Abcshw

Condition: ready for operation (used), Year of construction: 2024, Formtester Contour measuring station Marsurf 280 CD BG 22 Year of manufacture: 2024 Measuring range: 280 mm Further data will follow Dismantling and packaging by Mahr technician The machine is packaged and ready for transport Isdpfx Ajyt Ux Tsbcehw This offer is intended exclusively for business customers as defined in §14 of the German Civil Code (BGB)

Year of construction: 2015, condition: used, functionality: fully functional, The pneumatic butt welding device, type Sv‑63P, is equipped with a robust vertical frame that includes vertical clamping jaws and a sliding movable plate. Clamping is achieved via tandem cylinders, while the support plate on the static side is isolated from the base frame, which also carries the movable carriages. These carriages are connected to a horizontal cylinder for compressing the workpiece. The carriage movement is limited in both directions—both for compressing and opening—while the distance between the clamping jaws can be adjusted according to the cross-section or diameter of the workpiece. Clamping with the set jaw distance is controlled using foot switches. An additional control cabinet with switches and push-buttons allows for single or simultaneous clamping and supports both manual and automatic welding operations. After welding, the clamping jaws lift, and the carriages return to their initial positions. The welding parameters are set using a controller mounted on the side of the device. The welding voltage is regulated by thyristors, and the power transformer is fully encapsulated and water-cooled, connected to the contact jaws via laminated conductors. Inside the device, a power board with a thyristor and a main control board ensure smooth operation. On the device cover, a compressed air maintenance unit with a pressure regulator is installed to adjust the clamping force. The main switch to activate the unit is located on the controller for setting the welding parameters. Iodpfoyqr Sxex Abcohw

Year of construction: 2017, condition: used, functionality: fully functional, II. TEMPERED GLASS STRESS MEASUREMENT DEVICE TYPE JF-1 (GLASS SURFACE STRESS METER TYPE JF-1). The JF-1 device is designed for quality control of tempered glass by means of non-invasive measurement of external surface stresses. The complete set includes: PDA display, optical head, power supply, UV sensor, refractive fluid, USB cable, reference sample, software, and user manual. Additionally, 50 ml of refractive fluid is included. Condition: used, functional. Iodpfjw T Rq Sox Abcshw

Condition: excellent (used), Year of construction: 2024, TBM-D 2009006 – Position Sensor Box / Inclination Sensor Box V3 Manufacturer: TBM SW-Entwicklung und Elektronik GmbH (Germany) Production date: 02/2024 Power supply: 12 V DC, power consumption 70 W Iedeyc H R Tspfx Abcohw Condition: used, very good, fully functional Professional measurement/control box designed for industrial applications. The device is used for handling and processing signals from position/inclination sensors in test systems, automation, and research & development stations. Equipment and features: • LCD display for parameter presentation • Numeric keypad for configuration and operation • D-Sub communication interface • 12 V power sockets • Robust aluminum housing • CE marking • Device inspected (TBM inspection stickers)

Condition: excellent (used), For sale: Professional Fischer DUALSCOPE DMP40 coating thickness gauge designed for non-destructive measurement of metallic and non-metallic coatings on various substrates such as steel, iron, aluminum, and other non-ferrous metals. • Condition: Very good, fully functional and ready for operation • Current PCA calibration certificate dated 05.11.2023 • Complete set in original case including probe, cables, calibration foils, adapter, manual, and certificate Specifications and benefits • Automatic substrate recognition (FE/NFE) and selection of the appropriate measurement method • Wide measuring range and high measurement precision • Color display with intuitive navigation menu in Polish • Functions for statistics, results recording, and data export • Non-destructive measurement – ideal for production quality control and laboratory testing • Compliance with ISO, ASTM, and DIN standards • Robust industrial housing suitable for both field and laboratory use The set includes • Fischer DUALSCOPE DMP40 gauge • Measurement probe • Measurement cables • Calibration foils • Measurement adapter • Original transport case • Fischer lanyard • User manual and PCA certificate Applications • Coating quality control in electroplating, painting, and automotive industries • Industrial production and research laboratories • Service measurements and technical inspections Ihodpfx Abexlu Taocjw

Condition: excellent (used), Sell Measuring Instrument, Carbidoor, HSAFS. Isdpjvdx U Nefx Abcjhw

Year of construction: 2023, condition: excellent (used), Professional pneumatic device for emptying SEMCO 600 ml cartridges and containers, designed for industrial applications (adhesives, sealants, pastes, high-viscosity materials). Manufacturer data: • Manufacturer: axiss GmbH (Germany) • Type: 9110 / B-SEMCO600-PN-KM-F • Year of production: 2023 • Serial number: 514 • Quality standard: DIN EN ISO 9001:2015 • CE marking Iodeyc Nzuspfx Abcehw Technical description: • Pneumatic emptying of SEMCO 600 ml cartridges • Robust construction on an aluminium profile mounting plate • Piston assembly with transparent sleeve (position control) • Pressure regulator with pressure gauge • Directional control valve • Pneumatic quick couplings • Shut-off valve (safety) • Vertical or horizontal mounting possible • Smooth and controlled operation

Condition: excellent (used), Device for precise setting, measurement, and inspection of CNC cutting tools. Equipped with an EZset optical camera system and EZvision (Image Controller 1) software. Condition: very good, complete, ready for operation. Technical data and features: • Model: PRECIsset 400 • Measurement system manufacturer: EZset GmbH & Co. KG, Germany • Control screen: Image Controller 1 • Software: EZvision Ihjdpfjxn Awxex Abcew • Documentation version: 1.1.1 (18.08.2006) • Measuring range X / Z axes: up to 400 mm • Camera with image processing system • Edge, length, and tool diameter measurement function • Results can be saved and printed • USB and RS ports • Power supply: 12 V DC, 40 VA • Year of manufacture: approx. 2018–2019 • Supplied with original PRECITOOL technical documentation Condition: • Used, fully functional • Screen operates correctly • Longitudinal/Transverse axes reference correctly • Well-maintained unit from a German tool shop Functional description: The PRECIsset 400 enables fast and repeatable tool setup prior to CNC machining. The EZset vision system allows for blade geometry analysis and tool wear inspection. High measurement accuracy ensured by a stable column and industrial-grade optics.

Condition: excellent (used), I sell the SaluTron D2 Paint Thickness Meter. Ihodpfx Ajvbwy Eobcsw

Condition: good (used), Year of construction: 2007, I am selling a Kelch Seca 04E measuring device. Iodjug T Hmspfx Abcohw

Condition: good (used), Turning device, turning station, turning table, rotary station, rotary table, hydraulic press, workshop press, oil hydraulic press, workshop hydraulic press -without: hydraulic unit (can be supplied at an extra cost) -Turning station for: rotating workpieces Ihodpfed Tg Dcsx Abcow -Inner width: 1075 mm -Interior height: 720 mm -Transport dimensions: 2840/1600/H2300 mm -Weight: 969 kg

Year of construction: 2003, condition: good (used), Turning device, turning station, turning table, rotary station, rotary table, hydraulic press, workshop press, oil hydraulic press, workshop hydraulic press Ihjdpfx Aboyt Ncmscew -Manufacturer: WIMO Lifting Technology -Turning device: simultaneous turning of several stacks of circuit boards, or rotation of workpieces -Loading: loading and unloading from the front with a forklift -Maximum internal width: 4000 x 1700 mm -Maximum internal height: 580 mm -Minimum internal height: 250 mm -Load capacity: 6000 kg -Transport dimensions: 5960/2400/H2435 mm -Weight: 9000 kg

Condition: excellent (used), functionality: fully functional, Year of construction: 2015, operating hours: 6,980 h, load capacity: 1,500 kg, lifting height: 6,800 mm, free lift: 1,960 mm, fuel type: electric, mast type: triplex, construction height: 2,880 mm, battery capacity: 1,000 Ah, remaining battery capacity: 100 %, battery voltage: 24 V, DGUV certified until: 03/2027, tire condition: 100 %, Equipment: CE marking, UVV, full service history, lighting, sideshift, Still RX 50-15 Electric Three-Wheel Forklift with the following specifications: · Lifting capacity: 1,500 kg · Lifting height: 6,800 mm · Overall height: 2,880 mm · Operating hours: 6,980 · Year of manufacture: 2015 STILL 1.5-ton electric three-wheel forklift, open cabin, brand new battery, new non-marking tyres (black tyres available as an option), triplex mast with full free lift, side shifter, mini levers, fork length 1,200 mm, new charger. Includes a 500-hour service according to Still manufacturer's specifications and a valid UVV safety inspection at the time of sale. Inspection, demonstration, and test drive available by prior telephone appointment. Sale exclusively to commercial customers. Subject to prior sale, errors, and typos. We can deliver your new forklift cost-effectively with our own ramp low-loader (transport costs on request). Ihsdpjx I Ec Hofx Abcow For more information and offers, please visit our website.

Condition: good (used), functionality: fully functional, Year of construction: 2014, operating hours: 9,438 h, load capacity: 1,800 kg, lifting height: 5,220 mm, free lift: 1,800 mm, fuel type: electric, mast type: triplex, construction height: 2,350 mm, battery capacity: 625 Ah, remaining battery capacity: 85 %, battery voltage: 48 V, DGUV certified until: 03/2027, fork length: 1,600 mm, Equipment: CE marking, UVV, lighting, sideshift, Linde E 18 L-01 Electric Forklift with the following specifications: Operating hours: 9,438 Lifting capacity: 1,800 kg Lifting height: 5,220 mm Overall height: 2,350 mm Year of manufacture: 2014 LINDE 1.8 ton electric three-wheel forklift with front and roof windows, as-new battery from 2023, good front tires, new rear tires, triplex mast with full free lift, side shifter, mini-levers, two-pedal operation, lighting, fork length 1,600 mm (or 1,200 mm), battery charger Iedpfsyuafnex Abcshw Price ex works, including 1,000-hour service according to Linde manufacturer's requirements and valid UVV inspection Viewings, demonstrations, and test drives available by prior telephone appointment. Sale exclusively to businesses. Subject to prior sale and errors and omissions excepted. We can deliver your new forklift cost-effectively with our own ramp low-loader (transport costs on request). For more information and offers, please visit our website!

Condition: good (used), Calipers, calipers, calipers -Measuring range: 0-350 mm -Price: per piece -Number: 1x calipers available -Dimensions: 385/127/H10 mm -Weight: 0.4 kg Iodsd N N Dnjpfx Abcohw

Condition: ready for operation (used), With this offer, you are purchasing a used Keyence WM-3000 mobile coordinate measuring system. Item for sale: 1 x Keyence WM-3000 with the following equipment: Includes camera tripod Includes laptop with measuring software Includes Messtatser battery Includes transport case Condition: This offer is for a used device, which may show signs of wear (minor scratches or yellowing). The device has been tested for functionality. Isdpfxexzn E Ue Abcjhw For more information, please feel free to contact us personally.

Condition: excellent (used), measuring range X-axis: 250 mm, measuring range Y-axis: 380 mm, OCS Alfa-SYS Sara-set 33 Swift tool setting machine in very good condition. Current inspection/test until May 2025. I am including three pieces of fonts with the machine. The machine includes a Dymo Label 450 printer and a mouse with a disc. I am including a book with the machine. Ihsdpfov Am Emox Abcjw

Year of construction: 2010, condition: ready for operation (used), Main Drive Number of axis 3 This 3-axis Mitutoyo Quick Scope QS-250 Z was manufactured in 2010, featuring a joystick box, various clamping lugs, and profile strips for versatile setup options. It includes MAG1 mounting and both short and long spring clips for precise optical measurement tasks. Consider the opportunity to buy this Mitutoyo Quick Scope QS-250 Z optical measurement machine. Contact us for further details regarding this machine. Ijdpfx Abox D D Abscohw Application Types Measuring

Year of construction: 2019, condition: ready for operation (used), overall weight: 300 kg, General Data Machine weight 300kg Tools Max weight 20kg Ijdpfex Hblhjx Abcohw Max tool diameter 400 mm Max tool length 400 mm Additional Equipment The machine includes monitor, computer and label printer. This HAIMER UNO 20|40 optical measurement machine was manufactured in 2019. It supports a maximum tool diameter and length of 400mm, with a tool weight capacity up to 20kg. The machine itself weighs 300kg. If you are looking to get high quality measurement capabilities consider the HAIMER UNO 20|40 machine we have for sale. Contact us for more information. Application Types Measuring

Condition: ready for operation (used), Year of construction: 2019, General Data Measurements width 890 mm Measurements depth 788 mm Ihsdjx D H Nwepfx Abcow Measurements height 939 mm Machine weight 180 kg Main Drive Number of axis 3 This 3-axis Hexagon Optiv Performance 322 was manufactured in 2019. Ideal for precise measurements, this CMM machine represents a reliable solution for enhancing quality control processes. Consider the opportunity to buy this Hexagon Optiv Performance 322 CMM machine. Contact us for more information. Application Types Measuring

Condition: used, Year of construction: 2015, operating hours: 186 h, machine/vehicle number: GS3013C-12202, Empty weight: 1.516 kg Lifting capacity: 227 kg Working height: 780 cm Front tyres / undercarriage remaining: 50 Iedpjytm Nqjfx Abcshw Rear tyres remaining : 50 Tyre brand: - Transport dimensions (LxWxH): 1.82x0.82x2.16 Please contact PFEIFER GROUP for more information

Condition: used, Escap 61VM82-000-6 Motor inkl. ROD 426 Encoder Ihedoyr Sncepfx Abcew

Condition: used, length 630 mm width 400 mm Iedpjyr Sl Usfx Abcshw Granite slab 755x560x75mm measuring slab

Condition: excellent (used), Reversing clamp Manufacturer: Rückle Type: PKTW 2 Dimension: 5 x 1 x 1,5 meter Forkardt power chuck type FNC 315-65 Ihodpfxsin Ef Rj Abcsw Bore 65 mm Outer diameter 315 mm Further: Profile rail guide RUE 45 4 centering and clamping units Integrated chip guide