Used Herkules Km 1000 H for sale (5)

Condition: used, turning diameter over bed 2400 mm turning diameter over slide rest 2200 mm turning length 10000 mm power capacity 185 kW faceplate diameter 1650 mm turning speeds 1,5 -150 U/min max. workpiece weight 70000 kg clamping diameter 1400 mm Technical data Working range Maximum turning diameter over support: 2200 mm Maximum swing diameter over bed: 2400 mm Maximum turning length: 10,000 mm Clamping diameter in the headstock faceplate: 300 - 1,600 mm with special jaws up to 2,050 mm Clamping diameter in the tailstock faceplate: 300 - 1,400 mm Mounting in roller blocks: 1000 - 2250 mm Mounting in roller steady rests: 300 - 1100 mm Maximum workpiece weight: 70000 kg Main drive, faceplate Faceplate diameter: 2000 mm Faceplate speeds, continuously adjustable in 4 stages: 1.5 - 150 rpm Maximum torque at rated speed: 220,000 Nm Drive power of main motor: 185 kW Flange centre point angle: 70° Supports Travel of the plunge slide: 500 mm Travel of the face slide: 1400 mm Quick adjustment, longitudinal: 2000 mm/min Quick adjustment, face: 800 mm/min Infinitely variable feed, longitudinal: 0.6 - 300 mm/min Infinitely variable feed, face: 0.3 - 120 mm/min Max. cutting force at support: 20,000 kg Tailstock Faceplate diameter (removable): 1650 mm Faceplate clamping diameter: 1400 mm Flange centre point angle: 70° Quick adjustment: 1250 mm/min Hodpfx Aaexddvnjbefn Special equipment Copying device for first support Copying length 8500 mm Max. copying depth in one pass 500 mm Boring device: Boring bar 460 x 390 mm Drilling diameter 600 - 1000 mm Maximum drilling depth in one pass 2700 mm At Ks of 200 kp/mm² - s max. = 1.5 mm/rev a = max. chip cross-section 30 mm² at a projection of 1000 mm Reduced chip cross-section with increasing drilling depth A guide ruler for cone turning, adjustment angle up to 8° and a maximum cone length (in one pass) of 2000 mm, adjustment accuracy ± 5 minutes. A guide ruler for cone turning, adjustment angle up to 15° and a maximum cone length (in one pass) of 1000 mm, adjustment accuracy ± 5 minutes. A base for sliding jaw steady rests for the 3401 cylindrical grinding machine. 125 kg auxiliary crane on spindle box.

Condition: used, turning diameter over bed 2400 mm turning diameter over slide rest 2270 mm turning length 12000 mm control SIEMENS power capacity 185 kW faceplate diameter 1850 mm turning speeds 1,6 - 175 U/min max. workpiece weight 70000 kg Technical data Working range Maximum turning diameter over support: 2270 mm Maximum swing diameter over bed: 2400 mm Maximum turning length with 30 mm slide: 12000 mm with 80 mm slide: 11,500 mm Clamping diameter in the headstock faceplate: 300 - 2,040 mm Clamping diameter in the tailstock faceplate: 300 - 1,300 mm Mounting in roller blocks: 1000 - 1750 mm Load capacity: 35 t Mounting in roller steady rests: 800 - 1100 mm Load capacity: 30 t Mounting in roller steady rests of M0911: 300 - 1100 mm Maximum workpiece weight: 70,000 kg Main drive, faceplate Faceplate diameter: 2,200 mm Faceplate speeds, infinitely variable in 4 stages: 1.6 - 175 rpm Maximum torque at rated speed: 220,000 N·m Drive power of main motor: 185 kW Hfedpfx Aexc Ny Asaben Flange centre point angle: 70° Supports Travel of upper support: 735 mm Travel of plunge slide, 35 mm wide: 720 mm Travel of the face slide, 80 mm wide: 720 mm The slides can be adjusted continuously Rapid traverse, longitudinal: mm/min Rapid traverse, face: mm/min Feed rates, continuous, longitudinal: 0.05 - mm/min Stepless feed, face: 0.05 - mm/min Max. cutting force at support: 200000 N Face slide: Heavy-duty machining and BTS system Tailstock Diameter of faceplate (removable): 1850 mm Clamping diameter of faceplate: 1300 mm Flange centre point angle: 70° Quick adjustment: 2000 mm/min Special equipment CONTROL SIEMENS Slider measuring system Boring holder with boring bar holder ø 300 mm

Condition: used, Roller sets for section bending machine, 3-roll ring bending machine HERKULES WETZLAR The rollers fit a section bending machine HERKULES WETZLAR type BO 238 N Shaft diameter: 60 mm with 18 mm keyway 2 rollers set No. 1, roller diameter = 110 mm, roller width = 180 mm 2 rollers set No. 2, roller diameter = 160 mm, roller width = 40 mm 3 rollers set No. 3, roller diameter = 150 mm, for tube diameter Ø 33 mm, roller width 87 / 115 mm - Roller set No. 3 with adapter ring from Ø 93 to Ø 60 mm without keyway Hfodpfx Asglaq Isabon The machine had 2 driven rollers Total weight of all rollers: 57 kg Good condition

Condition: used, Year of construction: 2017, machine/vehicle number: 117119, Ref. no. 25158 Technical specifications: - Airflow approx. 220 m³/h - Dust class M - Connection nozzle: 50 mm - Drawer Hfjdsxay D Hopfx Aabon - Pneumatic connection - Drive power: 400 V / 1.3 kW - Required space: W 1000 x H 1350 x D 500 mm - Weight approx. 120 kg

Condition: good (used), HERKULES BO 230 K2 / Ring and Profile Bending Machine incl. Roller Sets -Technical data see images -6 roller sets -Operating tool -Machine equipped with transport wheels Hsdsxbh Tropfx Aabsfn Dimensions: LxWxH 1.6x1.6x1.7 meters Weight 1.8 tons Subject to errors and input mistakes.