Used Hermes for sale (369)

Condition: good (used), Julabo Type: FC 600 Technical specifications for FC 600 Dimensions (W x D x H): 36 x 54 x 49 cm Weight: 48 kg Temperature values: Operating temperature range: -20 ... +80°C Temperature stability: ±0.2°C Supply voltage: 230V/50Hz, 7 A Performance values: Heating power: 1.2 kW Hfjdpezgcb Iofx Afljk Cooling capacity: 20°C: 0.6 kW, 0°C: 0.34 kW, -10°C: 0.21 kW Refrigerant: R134a Global warming potential: 1430 Filling weight: 290 g Pump performance: Flow rate: 20 l/min Pump performance: Delivery pressure: 0.5 bar Filling volume: 6 to 8 l Condition: used Scope of delivery: (See picture) (Subject to changes and errors in the technical data and specifications!) We will be happy to answer any further questions you may have by telephone.

Condition: excellent (used), RS Simulators Type: ST2K320/45 K Shock test system, water-cooled Temperatures in the upper test chamber Temperature range: +40 °C to +180 °C Time deviation: ± 0.8 K according to DIN 50011 with an empty test chamber Temperatures in the lower test chamber Temperature range: -40 °C to +100 °C Time deviation: ± 0.8 K according to DIN 50011 with an empty test chamber Humidity levels in the upper test chamber Climate temperature range: +40 °C to +90 °C Humidity range: 20% to 98% (± 2 to 5%) relative humidity Humidity: 25% to 75% relative humidity Operating climate range: Temperature: +12 °C to +30 °C Humidity: 25% to 75% relative humidity Dimensions: Width 900 mm, Height 2000 mm, Depth 2300 mm Test chamber dimensions: Width 470 mm, Depth 700 mm, Height 440 mm Electrical power supply: Total power: 13 kVA Hfsdpszgbutjfx Aflok Current consumption: 25 A Voltage: 3x400V/N/PE / 50Hz Refrigerant: R404A/2.5 kg Chamber: approx. 950 kg For your safety as a buyer, please note the following information: The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of any necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leakage test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: excellent (used), Julabo Type: FP51-SL (v.2) Cryostat for low temperatures below -50 °C with a bath opening for internal and external temperature control. Cryostat circulators from the HighTech series, with HL or SL thermostats, are equipped with powerful pressure and suction pumps. The devices offer the full range of functions of the professional HighTech thermostat series. Technical data for FP51-SL Dimensions and volume Dimensions (W × D × H) 46 x 55 x 89 cm Filling volume 7.5 ... 12 l Weight 90 kg Pump connection thread M16x1 external thread Temperature values: Working temperature range -51 ... +200°C Temperature stability ±0.05°C Setting of the temperature display resolution 0.01°C Temperature display resolution 0.01°C Permissible ambient temperature +5 ... +40°C Supply voltage 400V/3PNPE/50Hz (plug 16A CEE) (R507) Performance data: Heating power 3 kW Cooling power 20 °C 2kW, 0°C 1.5 kW, -20°C 1 kW, -40°C 0.26 kW Refrigerant R507 Global warming potential 3985 Filling weight 1030 g Carbon dioxide equivalent 4.10455 t Pump performance Flow rate 22 ... 26 l/min Pump performance Delivery pressure 0.4 ... 0.7 bar Maximum suction capacity 0.2 ... 0.4 bar Viscosity max. 70 cSt Current consumption 16 A Electronics Interfaces Profibus optional Pt100 External sensor connection integrated Integrated program generator 6x60 steps Temperature control ICC Absolute temperature calibration 3-point calibration Hjdpfszgaa Ijx Aflsfk Temperature display VFD Temperature setting Keypad Voltage variants 400V/3PNPE/50Hz (plug 16A CEE) (R507) Condition: used Scope of supply: (See picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Year of construction: 2011, condition: used, THERMATOOL CFI 250 Solid State HF Welder 250 kW High frequency tube welding machine This THERMATOOL CFI 250 is a Solid State High Frequency Welder designed for the production of steel tubes and profiles using high-frequency welding technology. With an output power of 250 kW and a 400 kHz welding frequency, it delivers reliable, efficient, and high-quality welding performance for tube mill production lines. Technical Specifications · Manufacturer: THERMATOOL · Model: CFI 250 · Year: 2011 · Output Power: 250 kW · Welding frequency: 400 kHz · Input Voltage: 3 × 400 V · Input Current: 578 A Main Features · 250 kW MosFet HF inverter with 5 pairs of modules (5 positive & 5 negative) · AUTOMATCH automatic load matching system · 250Kw DC rectifier with PLC control Siemens S7 · Remote control console Hodpfx Afozpx Iislofk · Closed-loop distilled water cooling system Looking for a used THERMATOOL HF welder, 250 kW solid-state welder, or other second-hand tube mill equipment? Explore our extensive range of quality used machinery for the steel tube industry. Input Voltage: 3 × 400 V Input Current: 578 A Welding frequency: 400 kHz Output Power: 250 kW 250Kw MosFet HF Inverter with 5 pairs of modules: 5 positive & 5 negative 250Kw DC rectifier: with PLC control Siemens S7

Condition: ready for operation (used), Year of construction: 2013, cutting speed: 12,000 mm/min, total width: 2,000 mm, total height: 2,000 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 2,000 mm, controller manufacturer: BECKHOFF, number of axes: 4, This 4-axis VOORTMAN VCS Thermo was manufactured in 2013. It features a multi-axis automated chamfering/bevel head and is equipped with a Hypertherm HPR260XD plasma source with Truehole technology. The machine includes an integrated Beckhoff operator console and Beckhoff nesting software. If you are looking to get high-quality plasma cutting capabilities, consider the VOORTMAN VCS Thermo plasma cutting machine we have for sale. Contact us for further details. - Cutting Head Setup: Multi-axis automated chamfering/bevel head- Plasma Source: Hypertherm HPR260XD with Truehole technology- CNC Control: Integrated Beckhoff operator console- Software: Beckhoff nesting software including security dongle- Extraction Unit: TEKA Cube filter extraction unit- Filter Condition: Minor defect reported; will be repaired and sold in fully operational condition- Additional Equipment: cutting nozzles and two heads Hedpfx Afjzd Abpolefk

Condition: excellent (used), Year of construction: 1992, operating hours: 41,685 h, Technical specifications: Rated power, kW: 11,3 Mold area, mm: 475 x 250 Max. film width, mm: 495 Min. film width, mm: 150 Max. feed length, mm: 280 Min. feed length, mm: 50 Max. drawing depth/negative, mm: 100 Number of cycles/min.-max.: 48 Consumption of air/cycle at 6 bar: 100 Nl (net-pressurized air) Hfjdpfx Asq A Um Rjfljk Heat energy to be dissipated: with top heating ca. 10 260 KJ/h with top and bottom heating ca.: 17 715 KJ/h Special equipment: Hollow floor facility available Control cabinet: included

Condition: excellent (used), TA-Instruments Hodpfxjzdyz To Aflsfk Type: TMA Q400 TMA Thermomechanical Analyzer Performance: Temperature range (max.) -150 to 1,000 °C Temperature accuracy ± 1 °C Oven cooling time (air cooling)

Condition: excellent (used), Bystronic Type: ERMM180 Thermoplastic Applicator Application Area The thermoplastic applicator applies a thermoplastic material to rectangular glass panes within a production line for solar modules. The material forms a seal with a second glass pane, which is applied in a later process step. The panes are fed in, processed, and removed on horizontally running belts/conveyors. The thermoplastic applicator is a highly sophisticated machine that must meet many requirements with great precision. For this reason, you should only process raw materials (glass, sealant) that meet the specifications on the following pages. This helps to achieve high-quality and safe production. Performance and Connection Values Maximum transport speed: 18 m/min Height of the glass running surface: 1100 mm Height of the applied sealant bead: 0.5 to 1.2 mm Maximum width of the applied sealant bead: 12.0 mm Required constant input pressure, pneumatics: 6.5 to 8.0 bar Operating pressure, pneumatics: 6.0 bar Compressed air consumption, normal operation: 10 normal liters/min Compressed air consumption during drum change: 500 normal liters/min Average energy consumption per hour: 10 kWh Working temperature of the sealant: 110°C to 130°C Environmental Conditions and Emissions Minimum ambient temperature: +15°C Maximum ambient temperature: +35°C Maximum relative humidity: 75% Sound level: less than 70 dB (A) Requirements for the drums for the sealant Design: Material container D18 according to DIN 6644 – with base (F1) and smooth outer surface (body design, smooth). Capacity: 216 liters Inner diameter: 571.5 mm Height: 874 mm Hfodpfxozdyh He Afljk Minimum wall thickness: 1.25 mm Processable glass panes Glass types Glass panes with a smooth surface (float glass) can be processed. Dimensions and Weights Smallest dimensions Largest dimensions Geometry 1198 mm 1200 mm Length LS 498 mm 600 mm Width BS 1.8* mm 5.0* mm Thickness DS Thermoplastic materials based on poly-isobutylene (butyl) can be processed. The material must be flowable in the range of approximately 110°C to 130°C and exhibit a defined viscosity profile. Use only materials that have proven themselves in practice and that have been approved by the manufacturers of these materials and by Bystronic for the intended use. Detailed product descriptions and information on the handling, storage and disposal of the material used can be found in the information sheets and safety data sheets, which the manufacturers of the materials will gladly provide. Dimensions, gantry robot with glass conveyor Height x Width x Depth: 2800 x 1890 x 2735 mm Weight of the gantry robot: 850 kg Weight of the glass conveyor: 1400 kg Dimensions, drum pumps Height x Width x Depth: 3320 x 1060 x 1200 mm Weight (without drum): 850 kg Weight (with drum): 1100 kg Height H at drum pump FP1: 4400 mm Height H at drum pump FP2: 4000 mm Dimensions, control cabinet Height x Width x Depth: 2200 x 1800 x 600 mm Weight: 450 kg The applicator was used with the material Butyl. Condition: used From a test laboratory, in like-new condition, only a few operating hours for testing! Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: like new (used), Rittal Thermostat SK 3110 Like-new control cabinet thermostat for temperature control in control cabinets and enclosures. Suitable for controlling fans, heaters, or heat exchangers. Manufacturer: Rittal Type: Control cabinet thermostat Model: SK 3110 Mounting type: DIN rail Application area: Control cabinet air conditioning Switching contact: Temperature-dependent Application: Fan control Application: Heater control Housing color: Gray Hfsdpfszdnk Ajx Aflek Location: Kusel Quantity: 142 units available

Condition: excellent (used), This conveyor belt machine is ideal for shearing the edges of small carpet samples. Diagram of K-50 Hedpfx Afsud Dqkeljfk The key component of the KS 50 edge beveling machine is our SE 50 cutting unit. The machine is designed with angle adjustment from 0° to 60°. The depth of cut is adjustable from 2 mm to 22 mm. The guide plate for carpet samples can be easily adjusted steplessly from 20 mm to 210 mm. Quick and easy adjustments can be made by releasing the locking lever. The conveyor belt is driven by a three-phase motor. The speed of the cutting motor and the conveyor belt is infinitely adjustable by means of frequency converters. Larger pieces of carpets are guided manually as they pass through. The cutting width is 50 mm.

Condition: used, Year of construction: 2018, Oil hermetical distribution transformer 250kVA ( dual voltage ) 10 - 22 (2x±2,5%) kV/0,4kV, Dyn1, manufacturer year 2018, fully functional, test report, drawings. Hfjdpezhim Tefx Aflek

Condition: used, Multivac R272 CD Darfresh Thermoforming Packaging Machine The Multivac R272 CD Darfresh (MultiFresh) thermoforming packaging machine is designed for easy and efficient packaging of products in attractive vacuum skin packs (VSP). This packaging technology offers several advantages: Extended product shelf life The product remains securely fixed in place and does not shift during transport Premium product presentation with an attractive appearance Hfsdpjzlgpgsfx Aflek The excess film along the sides is removed by two rewind rollers, while small film remnants are extracted by an integrated scrap film suction system. Packaging functions: Vacuum packaging MAP (Modified Atmosphere Packaging) SKIN (Vacuum Skin Packaging) The machine is entirely manufactured from stainless steel. Technical Specifications Production capacity: up to 10 cycles/min (depending on package size, film type, vacuum level, and machine settings) Control system: Multivac PLC with a user-friendly programmable control panel Tooling configuration: one format with a 3.1 layout (142.33 × 250 mm) Film width: 470 mm Index length: 250 mm Loading area length: 1,600 mm Vacuum system: 250 m³/h Busch vacuum pump with a 500 m³/h booster (Roots) pump Water supply pressure: 1–7 bar Compressed air pressure: 6–8 bar Power supply: 400 V (3+N, 50 Hz) Power: 20 kW Weight: 3,000 kg Year of manufacture: 2005 Machine dimensions (W × D × H): 8,200 × 1,100 × 2,200 mm Thermoforming Packaging Process The bottom film is unwound from the roll. The bottom film is heated and formed in the forming station. The formed trays are transported forward. Products are loaded into the trays in the loading area. The top film is unwound from the roll. The filled packages are sealed (vacuum, MAP, or SKIN packaging). The packages are cross-cut. The packages are longitudinally cut. The finished packages are discharged for further processing, such as metal detection and/or labelling. How Vacuum Skin Packaging (SKIN) Works In vacuum skin packaging, the product is placed on a plastic tray. A specially developed skin film is heated and tightly vacuum-sealed around the product, creating a "second skin." This packaging method offers several important benefits: An attractive premium presentation Maximum product shelf life The product remains firmly in position and cannot move within the tray Ideal for upright or hanging retail display

Condition: good (used), Multivac thermoformer currently setup to produce ‘hotel style’ jam packs, 14g and 20g. 32 portions per cycle. Could also be used to produce ice cubes, sauce packs, ketchup, stock etc. Can also be supplied as a line with M&P 32 head filler and end of line tray wrapper if required (at extra cost). Hsdstp N Ddjpfx Aflefk

Condition: good (used), R245 in lovely condition. Was packing sauces. Currently has no tooling so customer can adapt to suit their needs. Comes with frame to mount date coders on but without coders. 422mm bed width. Hfsdpjq Dagbefx Aflok

Condition: excellent (used), Multivac R245 in excellent condition. Supplied without forming tool. 422mm wide. 7.8m long. Very low running hours. Hfsdpfsrp Dygsx Aflsk

Condition: used, Continuous fryer. Thermal oil heated, Teflon infeed etc. In nice condition but needs new control screen and plc. Hedpfx Afoyivr Tslofk

Year of construction: 2018, condition: like new (used), Temperature sensor Measuring transducer Manufacturer: Jumo Unused Type: PT 100 Number: 902102/10 Hodpfxjfgwmbj Aflsfk 00055514 0128409001008450005 Immersion tube, stainless steel Weight: 1 kg Total length: 570 mm Immersion length: 470 mm With bracket CH 512032 Estimated age

Condition: used, This listing is for a Thermo Scientific 75005701 Centrifuge Rotor. The unit is in full working condition and is ready for immediate release. Thermo Scientific 75005701 Centrifuge Rotor The 75005701 Centrifuge Rotor is a high-capacity swinging bucket rotor engineered for use with Thermo Scientific Sorvall ST8 and Heraeus Megafuge 8 centrifuges, designed for efficient and safe sample processing. Key Features: Capacity: Holds 4 round buckets, allowing for versatile sample volumes and formats, ideal for various laboratory applications. Hfsdpfxsxxyxbe Aflsk Swinging Bucket Design: This design promotes efficient sample processing, enabling the rotor to tilt during centrifugation for effective separation and easier loading/unloading. ClickSeal Biocontainment Lids: These lids ensure secure, one-handed operation, minimizing contamination risks and enhancing user safety during sample handling. Adaptors for Blood Collection Tubes: Specifically designed adapters accommodate 5/7mL and 10mL blood collection tubes, making it suitable for clinical and research applications involving blood samples. Compatibility: Tailored for use with Thermo Scientific Sorvall ST8 and Heraeus Megafuge 8 centrifuges, ensuring seamless integration into laboratory workflows. Specifications: Type: Swinging bucket rotor Capacity: 4 round buckets Adaptors: Available for blood collection tubes (5/7mL and 10mL) Compatibility: Thermo Scientific Sorvall ST8, Heraeus Megafuge 8 centrifuges

Condition: not inspected (used), 7m 600mm thermal oil fryer with top hold down belt. Has come direct from production. 7m frying length, 600mm belt width. Electric canopy hoist. Hedpfoht Hgnex Afljfk

Condition: excellent (used), Year of construction: 1999, operating hours: 80,188 h, machine/vehicle number: 322, Max. film width 700-800 mm Equipment / Additional information: -GREINER STACKING / Transfer device R3 (Ref. No.: 95002.24) // M. No.: 00020 // Age: 1998 PRICE GREINER STACKING: € 6.500.- / LOT SWITZERLAND Heating from above and below Hfodpoq Nn Hcefx Aflek Material PS and PP were processed 450 Ps // 350 Pp The following tools were used on the machine: 8-way WZ-Ø95 and 15-way WZ-Ø73 and 15-way WZ-Ø86 Packaging was produced especially for the dairy industry. The cycles are 18-25 strokes - depending on the cup weight.

Year of construction: 1988, condition: excellent (used), machine/vehicle number: 3284, (min.) material thickness: 0.65 mm (max.) material thickness: 2 mm Technical Data: Width of film, max./min. 450/350 mm Forming area max. 430 x 160 mm Drawing depth max. negative/positive 6/20 mm (on request 22 mm negative) Top heater max. 10,15 kW Driving motors 3,0 kW Total connected load at 100 % duty cycle 12,7 kW Working air pressure 6 bar Hodjhbu E Hspfx Afljfk Air consumption (dependent on product) max. 1250 I/min Rate of water flow max. 1,0 m3/h COMPACT AND ROBUST - giving continuous high output. Easy and ergonomical operation (e.g. take- off height 1300 mm). QUICKLY CHANGEOVER - from 30° to 90° foil feed giving maximum material utilisation for both square and round lids. Heater changeover problem-free. PRECISION - The accuracy of the form table movement is guaranteed by linear guide bearings and hardened rods. The safe reliable guarantee for precision. OPTIMUM PUNCHING ACCURACY EVEN DURING MAXIMUM OUTPUT Cam controlled function sequence guarantees absolute precision with every cycle.

Condition: excellent (used), THERMAL TRANSFER PRINTING SYSTEM WITH PUNCH (printing, laminating, punching) Hodpfx Afsvf Ig Delefk Equipment / Additional information: Car inspection stickers were last produced

Condition: excellent (used), Year of construction: 2000, machine/vehicle number: 403, THERMO FORMING MACHINE TFT IMC 5030 (WITH TOOLS) Equipment / Additional information: unwinding: Roll recording: easy Max roll diameter: mm 1000 Settlement: automatically Thermoforming machine: Maximum tool dimensions: mm 520x330 Pos. Molding height max .: 15 mm Neg. Molding height max .: 120 mm Hfodpfx Afen D Ew Ioljk Sheet width: mm 150/760 Movement Step: mm 50/330 Max HIPS film thickness: 1.8 mm Hub of the sub-table: 150 mm Clamping force: 7500 Kg Inst power top heater: 18.8 Kw Inst power under heater: 14.1 Kw Idle clock speed: per minute 40th power main drive motor: 2.2 Kw Engine power. Film feed: 0.75 Kw Air operating pressure: Kg / cm2 7 Water consumption at 12 °: 1t / 1` approx.30 Air consump. at 7 kg / cm2: 1t / cycle 125 Installed power: Kw 50 9xTool (PRICE FOR TOOLS: € 2.500.- / FOR EACH TOOL): Article no. // Tool no. // Cavities // Description / Product: 3599 // 457 // 10 // Vending machine cup capacity/capacity/contenance=223ml 593 // 460 // 8 // Coffee-to-go / thermo mug / thermo cup Filling capacity / Capacity / Contenance=300ml / 12 oz 509 // 452 // 6 // Ice cream cup: filled to the brim=140ml / Filling capacity with headspace 6mm: 120 ml 591 // 459 // 10 // Thermo mug ⌀ 81/180ml 740 // - // - // Standard cup with sealing edge ⌀ 75-120ml 3589 // 458 // 12 // Coffee-to-go / thermo mug / thermo cup: Filling capacity / Capacity / Contenance=80ml 595 // 456 // 10 // Vending cup / Gobelet pour automate: Filling capacity / Capacity / Contenance=150ml 210 // - // - // Baking case / technical part / plate or tray 8000 // 455 // - // Granule cup 180 ml / technical part with flat sealing edge

Condition: good (used), Tricool Thermal oil heater Hfjdpfx Afjrwz N Isljk Model: SHK509A Sheik Thermail oil heater, adjustable digital controls, up to 350'C, mobile

Condition: not inspected (used), 7m x 1000mm thermal oil fryer with top hold down belt. Has come from factory producing chicken burgers and nuggets for major fast food chain. 7m frying length, 1000mm belt width. Hfodeigruyepfx Afljk