Used High Pressure Cleaner for sale (31,354)

Year of construction: 2000, condition: excellent (used), Atlas Copco Crepelle High-Pressure Compressor Type: D44 Year of manufacture: 2000 Operating pressure: 40 bar Power: 220 kW Speed: 839 RPM The compressor can be inspected at any time. Ndsdpjf Hly Sefx Akmoc

Condition: used, Year of construction: 1991, Type: WKF 50/12 N.SE Size: DN50 Nsdpfxoy A Rbde Akmjdc 12 stages Standard version with mechanical seal Flow rate: 26.9 l/s (96.8 m³/h) Head: 380 m Speed: 2,960 rpm

Year of construction: 2011, condition: excellent (used), machine/vehicle number: B1.01177.0824, Stationary high-pressure pump unit Hammelmann HDP 177, mounted on a base frame. Similar to, but not a Kamat, Uraca, or Woma. Pump type: HDP 177 Operating pressure: 300 bar Flow rate: 239 l/min Drive speed: 1500 rpm Ndodpfxehtfyns Akmoc Drive power: 130 kW with VEM motor 132 kW, 3-phase motor, IP55, with pressure regulating valve, with safety valve, with oil cooling system. Dimensions L x W x H: approx. 2000 x 850 x 1400 mm Weight: approx. 1500 kg Year of manufacture: 2011 Condition: in very good used condition.

Year of construction: 1993, condition: used, Material: regular steel Driving force: 55 kW Dimensions: approx. L 1600 mm x W 1000 mm x H 900 mm Empty weight: approx. 1500 kg Flow rate: 14.5 m3/h Operating pressure: 100 bar Ndsdpfxogb D Hij Akmjc Technical documentation: no Message: piston: 57mm, stroke rate: 326 1/min, stroke: 105mm

Condition: excellent (used), Pressure centrifugal pump Vertical centrifugal pump Grundfos CR 90-3 A-F-A-E-EUBE more piece Vertical, multistage centrifugal pump with suction and discharge ports on the same level. The pump head and base are in cast iron - all other wetted parts are in stainless steel (EN 1.4301) Rated flow 90 m³/h Rated head 65.5 m Max pressure at stated temp 16 bar / 120 °C Type of connection DIN Size of inlet connection DN 100 Pumped liquid Water Liquid temperature range 0 .. 120 °C Selected liquid temperature 20 °C Density 998.2 kg/m³ Electrical data Ndodpfx Akehy Nx Ejmec Motor type SIEMENS Rated power - P2 22 kW 2940 rpm Mains frequency 50 Hz Rated voltage 3 x 380-415D/660-690Y V Rated current 41,5-39,5/24,0-23,5 A Cos phi - power factor 0.86 Rated speed 2945 rpm Number of poles 2 Enclosure class (IEC 34-5) IP55

Year of construction: 2018, condition: excellent (used), machine/vehicle number: B8.01142.0395, Stationary high-pressure pump unit Hammelmann HDP 142 on a base frame. Similar to, but not a Kamat, Uraca, or Woma. Pump type: HDP 142 Operating pressure: 610 bar Flow rate: 78 l/min Drive speed: 1500 rpm Drive power: 86 kW with AC M 280 M-4/HE electric motor, 90 kW, IP55, with pressure regulating valve, with safety valve, Ndsdpfx Aeh E Dgzjkmsc with oil cooling system. Dimensions L x W x H: approx. 1,700 x 850 x 1,450 mm Weight: approx. 1,200 kg Year of manufacture: 2018 Condition: after service by Hammelmann in October 2020, it has only been in operation for a few weeks and has been out of service for more than a year. In very good used condition.

Condition: good (used), Water jet high-pressure pump, high-pressure pump for water jet cutting, water jet cutting, water jet cutting system, pressure boosting cylinder, pressure boosting -Manufacturer: Deter Fluidtechnik, high-pressure pump for waterjet cutting with water tank and feed pump -High-pressure pump: Type PP1205/110V -Centrifugal pump: Calpeda NM 1/AE -Container: Stainless steel -Individual components: see photos -Dimensions: 1580/410/H600 mm -Weight: 118 kg Ndsdpfxszfgb As Akmec

Condition: used, Mechanical High-Pressure Machine Vice GRESSEL Type MHS 126-3 High-pressure clamping device Jaw width: 125 mm Jaw height: 40 mm Opening width: 221 mm Clamping force: 2 / 3 / 4 tons Guideway height: 62 mm - Clamping force adjustable in 3 stages - High-pressure vice with mechanical power amplifier - Clamping range adjustable in 2 stages Nsdpfxexlkvdj Akmodc - Lateral thread for workpiece stop Dimensions: 440 x 140 x 102 mm Weight: 26 kg

Condition: used, Hydraulic machine vise, high-pressure clamping device RÖHM Type 740 RA 4 Jaw width: 160 mm Jaw height: 75 mm Clamping force: 4 tons Clamping range: 0 to 300 mm Ndsdez It Rtjpfx Akmjc Opening width: max. 305 mm Clamping range: max. 100 mm (per step) Guide rail height: 85 mm - 3 clamping ranges adjustable via locking pins Dimensions L x W x H: 570 x 240 x 165 mm Weight: 60 kg Good condition

Condition: good (used), Centrifugal pump, high-pressure pump, water pump, multi-stage vertical centrifugal pump Ndjdpfxjhn S Slj Akmsc -Manufacturer: Siemens Hinsch, side channel pump type CEHF 3104 -Motor: AEG 22 kW / 2915 rpm -Dimensions: 1680/800/H990 mm -Weight: 394 kg

Condition: good (used), Centrifugal pump, water pump, stainless steel pump, food-grade pump, vertical centrifugal pump, multi-stage vertical centrifugal pump, pressure booster pump, pressure intensifier pump -Manufacturer: Lowara, Multi-stage vertical centrifugal pump -Type: 5SV07F022T -Motor: 2.2 kW / 2860 rpm -Protection class: IP55 -Flow rate: max. 8.5 m³/h -Number: 2x pumps available -Price: per piece -Dimensions: 250/210/H685 mm -Weight: 30.2 kg Ndjdpfxjzg Dmxe Akmjc

Condition: ready for operation (used), 1 unit available We are offering a high-quality GARANT LCV 125 G chuck for professional use in CNC machining centers. This chuck impresses with its high clamping force, precision, and optimal accessibility, making it ideally suited for 5-axis machining and complex milling operations. Technical features: Manufacturer: GARANT Type: LCV 125 G Jaw width: 125 mm High clamping force with a compact design Precise workpiece positioning Ideal for 5-sided and 5-axis machining Robust industrial design Advantages: High repeatability Optimal accessibility for milling tools Nedpfx Aozuz R Rekmsdc Reduced setup times Safe and vibration-free workpiece clamping Suitable for single-part and series production Condition: Used, fully functional. Normal signs of wear from industrial use.

Condition: like new (used), operating hours: 1,606 h, functionality: fully functional, Well-functioning electrically powered Woma 1502 Nodpfx Aov Stknekmsdc 415 bar - 133 ltr/min

Condition: used, Year of manufacture 2007 Connection 400 V 16 A CEE 5.5 kW 630 m³/h Functional video available. Ndedpfx Ajy Ec T Dokmjc

Condition: reconditioned (used), Year of construction: 2023, functionality: fully functional, machine/vehicle number: C3.00202.1212, total width: 1,000 mm, total length: 2,000 mm, total height: 1,450 mm, pressure: 340 bar, operating pressure: 340 bar, type of input current: three-phase, overall weight: 1,740 kg, rotational speed (max.): 1,500 rpm, empty load weight: 1,700 kg, power: 147 kW (199.86 HP), year of last overhaul: 2026, pump capacity: 254 l/min, Equipment: type plate available, Stationary high-pressure pump unit Hammelmann HDP 202 mounted on a base frame. Similar but not Kamat, Uraca, or Woma. Pump type: HDP 202 Operating pressure: 340 bar Ndedsyacaxjpfx Akmoc Flow rate: 254 l/min Drive speed: 1500 rpm Drive power: 157 kW with SIEMENS 160 kW 3-phase motor, IP55 Dimensions (LxWxH): approx. 2000x1000x1450 mm Weight: approx. 1740 kg Year of manufacture: 2023 Condition: In January 2026 new piston seals were installed and valves checked. In very good used condition.

Condition: as good as new (ex-display), Used High Pressure Concrete Nailer HN 25 C2 MAX Powerlite The HN25C2 is a compact nailer for concrete and steel, allowing you to work as close as 6 mm from the edge, making it ideal for tight corners. Its main area of application is work on metal stud framing. The nose of the HN25C2 is compact, meaning you can also work with thin metal profiles. With special nails, it can penetrate steel up to 5.0 mm thick or drive nails into concrete with a compressive strength of 60 N. Technical specifications: • Operating pressure: 12–25 bar • Nail length: 15–25 mm • Magazine capacity: 100 nails • Air consumption: 1.6 ℓ/cycle at 18 bar operating pressure • Weight: 2.0 kg The nailer was used for demonstration purposes and is therefore classified as used. It is in perfect technical condition. Supplied in a transport case with user manual. Njdpfeyizrfsx Akmjdc For further details, please refer to the pictures. You will receive an invoice with VAT shown separately. Payment in advance (bank transfer) only – no PayPal! Collection from our shop is of course also possible. Shipping by UPS – shipping costs €8.90. If you have any questions, please do not hesitate to contact us.

Condition: used, NC High-Pressure Vice, High-Pressure Machine Vice RÖHM NC Precision Machine Vice Model RKD-125 ID No.: 180467 / D2948 Year of manufacture: approx. 2010 Jaw width (step jaws): 125 mm Jaw height (step jaws): 40 mm Jaw width (add-on jaws): 135 mm Jaw height (add-on jaws): 49 mm Machine vice body width: 126 mm Max. opening width: 141 mm per side (only with step jaws, without add-on jaws) Nedpsyy Dfdsfx Akmsdc Clamping force: 4 tons Guideway height: 105 mm - High-pressure vice with mechanical force amplifier - Clamping force adjustable in 4 steps from 1 to 4 tons - Two clamping modes: single clamping with dummy, double clamping - Various clamping ranges via 3 guide slots in each base jaw - Step jaws (reversible) - Robust machine body, ground on all sides - Can be mounted horizontally, vertically or laterally - Middle jaw dimensions (L x W x H): 125 x 40 x 40 mm - Add-on jaw dimensions (L x W x H): 135 x 20 x 49 mm Overall dimensions (L x W x H): 680 x 135 x 155 mm Weight: 56 kg Good condition

Year of construction: 2012, condition: excellent (used), Stationary high-pressure pump unit, Hammelmann HDP 47, mounted on a base frame. Similar to, but not a Kamat, Uraca, or Woma. Pump type: HDP 477 Operating pressure: 300 bar Flow rate: 24 l/min Drive speed: 1500 rpm Drive power: 14 kW with AC motors ACM 160L-4/HE 3~ IP55 15kW electric motor, with pressure regulating valve, with safety valve, Ndjdpfx Ajh Uc Nkekmjc with oil cooling system. Dimensions L x W x H: approx. 1,100 x 750 x 1,200 mm Weight: approx. 570 kg Year of manufacture: 2012 Condition: In very good used condition.

Condition: used, ManuMatik / KraussMaffei High-Pressure Cylinder These high-pressure cylinders come from a commutator press and were in use there until the very end. Overall height: 184 cm Cylinder height: 150 cm Rod circumference: 28 cm Ndjdpfx Akshtyxlemjc Diameter: 8.90 cm The following components are included: Check valves z2s16-1-51 Pressure reducing valve Zdr 6 dp0-45/40ym w80 Scope of delivery: 1 x press unit Complete factory closure, large selection of storage platforms, pallet racking, shelving systems, paternoster lifts. High-quality industrial machines, lathes, grinding machines, hand tools. More items – new and used – can be found in our shop! International shipping costs available upon request!

Condition: used, Vertical multistage high-pressure centrifugal pump KSB Type Movichrom N CN 3/10 2R Serial no. 1-P30-837561 Nominal flow rate max. 3 m3/h Nodpfxorl U S Ej Akmedc Nominal delivery head 70 meters = 7 bar Nominal speed 2900 rpm Motor power 1.5 kW Mains connection 400 Volt, 50 Hz - Pump construction in 10 stages - Pump elements made of stainless steel, pump base made of cast iron - Connection flanges DN 32 - Suitable for drinking water supply, irrigation and drainage Space required for pump L x W x H 250 x 220 x 830 mm Weight 38 kg Unused replacement pump from stock, as good as new Not a submersible pump or submersible pump

Condition: new, Year of construction: 2016, functionality: fully functional, pressure: 440 bar, operating pressure: 440 bar, rotational speed (max.): 1,500 rpm, empty load weight: 1,700 kg, power: 66 kW (89.73 HP), year of last overhaul: 2026, pump capacity: 81 l/min, Equipment: type plate available, High-pressure plunger pump, Hammelmann HDP 72. Similar to, but not a Kamat, Uraca, or Woma. Ndsdpfxezgw Hxj Akmec Pump type: HDP 72 Operating pressure: 440 bar Flow rate: 81 l/min Drive speed: 1500 rpm Drive power: 66 kW Max. inlet temperature: 60°C Year of manufacture: 2016 Condition: Manufactured in 2016, but unused.

Year of construction: 1989, condition: ready for operation (used), High pressure pump ABEL PC57.1S Article no.: RE-HU-2019-1102-P51e Machine: High pressure pump Nodpfxjd Hiwie Akmedc Type: ABEL PC57.1S Mach.-Nr.: 12042E9 Capacity: 18 m3/h Pressure: 100 bar Motor: 75 kW

Condition: used, Jaw width: 125 mm Ndsdpfju Sh Husx Akmsc Clamping width: 220 mm

Condition: excellent (used), Compressor type: Dry air Revolutions per minute 750 Outlet pressure: 42 bar Volume spawned: Nodpfx Aowcgc Rjkmodc Number of cylinder lines 2/4 stages Supplied air: 7.73m³ / min; 464m³ / h Motor power: 90kW

Condition: used, High-pressure pump unit Njdpfxoyt Nv To Akmjdc Type: 1502 35 High-pressure plunger pump of the 2 series Max. pressure: 228 bar Flow rate: 130 l/min Driven by ABB 55 kW electric motor