Used Hinomoto C 174 for sale (54,821)

Condition: used, Year of construction: 2011, Used Equipment Year of Manufacture: 2011 Condition: Currently installed Equipment and Technical Data: -Filter housing base ring NFHSU 9/9 with discharge chute for press - Discharge: 1.1 kW - Storage volume in the base ring approx.: 3.25 m³ - Dimensions L x W x H (incl. base ring) 2440 x 2440 x 900 mm - Ground clearance: 350 mm - Conveyor screw for briquetting press 0.75 kW - Extension and expansion rings are optional; max. storage volume approx. 12 m³ - Extension and injection ring NFHSU for 9/9 and 10/10 Jet, L x W x H: 2480 x 2480 x 500 mm - Expansion ring for NFHSU 9/9, 2480x2480x700 mm, with inspection door and type-tested explosion flap - Filter for filter housing NFHSU 9/9/20, filter area 116 m²: The Nestro filter system NFHSU is a solid filter construction made of 4 mm galvanized steel sheet and is designed for outdoor installation and weather resistance. This filter system is particularly robust and designed for underpressure operation up to -3,500 Pa. The filter system is equipped with upper and lower inspection doors 600 x 600 mm, with automatic filter regeneration, dry extinguishing system, differential pressure switch / volumetric flow monitoring and the necessary explosion protection. Note: Filter is equipped with high-quality filter material, BIA category M, antistatic, residual dust content < 0.1 mg/m³ and suitable for return air operation. Further technical data: - Filter tube length: 2,000 mm - Filter tube diameter: 230 mm - Number of filter tubes: 81 - Filter area: 116.0 m² - Filter regeneration: automatic/motorized - Number of vibrating motors: 4 pcs - Fan shroud for NFHSU 9/9 including inspection door - Fan US-FHN (clean gas) 22 kW 16,400 m³/h - 3,200 Pa: A Nestro high-performance fan with above-average efficiency and high energy saving potential when using a frequency inverter (optional). The robust welded construction is primed and painted in RAL 5015. The fan is delivered as standard with an inlet cone and backflow damper. Technical data at a glance: - Volumetric flow: 16,400 m³/h - Corresponding underpressure: 3,200 Pa - Electric motor: 22 kW / 400 Volt / 50 Hz - Speed: 3,000 rpm - Design: B5 - Pressure nozzle: without - Application area: Nestro underpressure filter and others - Injection nozzle d= 400 mm with flange ring - Injection nozzle d= 350 mm with flange ring - Backflow damper d= 350 mm with flange edge - Backflow damper d= 400 mm with flange edge - Briquetting press C150; 30 - 50 kg/h, hydraulic unit 5.5: Nwedpfxozvz Tbo Aprsk Technical data: - Power consumption (hydraulics): 5.5 kW - Briquette diameter: 50 mm - Weight: 650 kg - Briquetting performance with a bulk density of approx. 250 kg/m³, material-dependent: 30 - 50 kg/h - Ground clearance with base frame (art. no. 710300): 350 mm - Briquetting press, dust-proof - Briquetting press complete with hydraulic solenoid valve control for automatic operation, oil tank with 100 l oil, in welded construction, including main cylinder, stuffing cylinder, gripper cylinder, pressing jaw, electrical control panel with fully automatic control and 5 m cable The press is standardly equipped with: Monitoring switch for oil temperature, hardened press bushing, connection part for briquette line and automatic briquette length adjustment

Condition: ready for operation (used), Year of construction: 1997, operating hours: 13,465 h, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 400 mm, table load: 1,000 kg, controller model: Heidenhain iTNC 430, TECHNICAL DETAILS Travel range, X-axis: 600 mm Travel range, Y-axis: 450 mm Travel range, Z-axis: 400 mm Table load: max. 1,000 kg Tool holder: SK 40 MACHINE DETAILS Nwjdpfx Ajzwmx Seprjk Control system: Heidenhain iTNC 430 Operating voltage: 400 V Control voltage: 24 V Machine weight: approx. 6,000 kg Operating hours: 48,690 h Spindle hours: 13,465 h EQUIPMENT Tool holders SK 40 Documentation Heidenhain programming manual Machine vise Clamping jaws

Condition: used, Year of construction: 2002, Grinding width: 1350 mm Belt width: 1370 mm Belt length: 1900 mm Workpiece thickness: 3 - 150 mm Feed rate: 2.5 - 13 m/min (infinitely adjustable) Belt blowing system Dust brush Drives: Grinding unit: 15 kW Nwsdpfx Apezwm Hcerek Total connected load: 17 kW Weight: approx. 2400 kg Dimensions: 2000 x 1850 x 2100 mm Location: Nattheim

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, Weiler C30 Cycle Lathe (2011) Manufacturer: Weiler Type: C30 x 750 Year of manufacture: 2011 Condition: very good, used, optional with new maintenance before delivery Center distance 750 Swinging diameter over bed 330mm Swinging diameter over cross slide 160mm Travel of cross slide 180mm Bed width 240mm Turning tool cross-section 20 x 20mm Spindle head according to DIN 55027, size 5 Spindle diameter in the front bearing 70mm Spindle bore 40.5mm Internal taper of the main spindle 5mm Drive power 60 %/100 % ED 9/7kW Total speed range 1 – 4,500 rpm Feed force longitudinal 6,000N Feed force facing 3,000N Feed range 0.001 – 10 mm/rev Rapid traverse rate longitudinal/facing 6/3 m/min Metric threads 0.1 – 400mm Inch threads 56 – 1/4 G/inch Module threads 0.125 – 28mm DP threads 224 – 1 Dp Max. number of thread starts 99 Tailstock diameter 50mm Tailstock travel 130mm Internal taper of the tailstock MK3 Nwsdsztyqmspfx Aprsk Length 1750mm Width 1350mm Height 1670mm Weight 1300kg Scope of delivery Chuck Multifix including 17 tool holders Machine lamp Coolant system Machine feet Original documentation Drawer cabinet

Year of construction: 2013, condition: excellent (used), Temperature Test Chamber VTS³ 7160-5 H Water-cooled For sale is a used temperature test chamber from the manufacturer Vötsch. The test chamber is suitable for temperature and climate testing, environmental simulation, material testing, quality assurance, as well as development and stress tests. Technical data Manufacturer: Vötsch Type: VTS³ 7160-5 H Equipment type: Temperature test chamber Test chamber volume: approx. 1568 liters Test chamber dimensions: approx. 1100 x 950 x 1498 mm (W x D x H) Housing dimensions: approx. 1300 x 2635 x 2013 mm (W x D x H) Weight: approx. 1700 kg Temperature range: -70 °C to +180 °C Temperature change rate (heating): approx. 5 K/min Temperature change rate (cooling): approx. 4 K/min Max. heat compensation: approx. 5000 W Temperature deviation (time): ± 0.1 to ± 0.5 K Temperature homogeneity (spatial): ± 0.1 to ± 2.0 K Refrigerant: R404A Refrigerant quantity: 5.20 kg ND max.: 18 bar g HD max.: 25 bar g Refrigerant: R23A Nsdszv S Hfepfx Aprjwk Refrigerant quantity: 1.30 kg ND max.: 18 bar g HD max.: 25 bar g Cooling water consumption under full load at Temperature difference Dt = 10 K: 2.2 m3/h Temperature difference Dt = 5 K: 4.4 m3/h Power connection: 3/N/PE AC 400 V ±10 % / 50 Hz Rated power: 17.6 kW Rated current: 32 A Features Touch panel operation Interior made of stainless steel Side access ports Test chamber equipment as shown in the pictures Application areas Temperature testing Climate testing Environmental simulation Material testing Electronics testing Quality assurance Research and development Condition Used Optical condition according to pictures Scope of delivery 1x Vötsch VTS³ 7160-5 H temperature test chamber Important note: For the safety of our customers, the following work will be carried out on the offered climate chambers in advance: 1. Functional check and replacement of necessary components 2. Refilling with legally compliant refrigerant if necessary 3. Leak test with certificate 4. Documented test run after successful inspection Shipping or freight transport possible. Subject to changes, errors and prior sale. We will gladly answer any further questions by telephone.

Condition: repair required (used), mileage: 2,47,970 km, power: 125 kW (169.95 HP), first registration: 12/2000, fuel type: diesel, empty load weight: 4,300 kg, overall weight: 7,490 kg, tire size: 9,5 R17,5, axle configuration: 2 axles, wheelbase: 3,050 mm, brakes: engine braking, color: white, gearing type: mechanical, emission class: euro3, suspension: steel, loading space volume: 3 m³, loading space length: 3,800 mm, loading space width: 2,200 mm, loading space height: 400 mm, Equipment: ABS, cruise control, differential lock, trailer coupling, Displacement 4,580 ccm 40 trailer coupling Hydraulics (power take-off) low-noise Engine wiring harness burnt Sun visor Rotating beacons Double bench seat Ball and jaw coupling hydraulic air + power for trailer operation Njdsvcm Hqepfx Aprowk Errors excepted

Condition: used, mileage: 87,000 km, power: 75 kW (101.97 HP), first registration: 02/2020, fuel type: diesel, overall weight: 2,635 kg, next inspection (TÜV): 04/2028, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, total length: 4,956 mm, total width: 1,920 mm, total height: 1,881 mm, loading space length: 2,512 mm, loading space height: 1,290 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, Beautiful and well-maintained Opel Vivaro L2H1 long wheelbase panel van, 75 kW, with Würth workshop fitting and optimal equipment for trades and businesses. Vehicle from first owner. Würth workshop fitting / shelving system in the cargo area (details below). 2-zone automatic climate control with pollen filter Alarm system 3 seats (double passenger seat) Driving Assistance Package 1, driving assistance systems: - Cruise control - Rear view camera - PDC Park Distance Control / parking assistance system front and rear, visual and acoustic display - Blind Spot Information System (BLIS) - Hill start assist - Driver fatigue detection - Automatic headlight control - Automatic windshield wipers - Brake assist - ABS, ASR, ESP On-board computer Nwjdpfxezw Nx Ue Aprsk Audio Pro with color touchscreen - Media: Radio, Bluetooth music streaming, USB - Mirror Link, Android Auto, Apple CarPlay - Hands-free system for mobile phone with Bluetooth - Front airbags for driver and passenger Power windows Electrically adjustable, heated, and folding exterior mirrors Central locking with remote control Fog lights Spare wheel and jack Vehicle has a speed limiter of 130 km/h. Rear double doors without glazing, opening angle 180 degrees Sliding door in the cargo area, right side Body style: L2H1, long wheelbase panel van Wheelbase 3275 mm Floor covering in the cab: plastic Steering wheel adjustable Driver's seat with fold-out armrest, adjustable in several ways: - Seat height, backrest, lumbar support 6-speed manual transmission Heat-insulating glazing Cargo area fitting: Würth workshop fitting (similar to Aluca, Bott, Sortimo). Left side with shelving system including shelf compartments, storage compartments, and 3 drawers. Right side with shelving system including storage compartments and a storage compartment. Cargo area partition, robust wooden floor. Special fastening rails and eyelets are available for securing the load. LED interior lighting. Walls partially clad with hard fiberboard. Mounted tires: Winter tires 215/60 R 17 on steel rims with approximately 8 mm tread depth at the front and approximately 9 mm at the rear. Serviced according to maintenance schedule, history: 02.2022 / 17,890 km Inspection + oil change 04.2024 / 34,550 km Insp. + oil change 04.2026 / 83,362 km Insp. + oil change Despite careful processing, input and data transmission errors may occur in the vehicle description, including images. Errors and prior sale reserved. The vehicle can be inspected by DEKRA or TÜV if desired.

Condition: used, mileage: 1,15,000 km, power: 75 kW (101.97 HP), first registration: 02/2020, fuel type: diesel, overall weight: 2,635 kg, next inspection (TÜV): 02/2028, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, total length: 4,956 mm, total width: 1,920 mm, total height: 1,881 mm, loading space length: 2,512 mm, loading space height: 1,290 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, Beautiful and well-maintained Opel Vivaro L2H1 long wheelbase panel van, 75 kW, with Würth workshop fittings and optimal equipment for trades and businesses. Vehicle is from first owner. 2-zone automatic climate control with pollen filter Alarm system 3 seats (double passenger seat, multifunctional) Nsdpozw Ny Esfx Aprswk Driver assistance systems: - Cruise control - Rear view camera - PDC Park Distance Control / parking assist system front and rear, optical and acoustic display - Blind Spot Information System (BLIS) - Hill start assist - Driver fatigue detection - Automatic headlight control - Automatic windshield wipers - Brake assist - ABS, ASR, ESP On-board computer Audio Pro with color touchscreen - Media: radio, Bluetooth music streaming, USB - Mirror Link, Android Auto, Apple CarPlay - Hands-free system for mobile phone with Bluetooth Electric windows Electrically adjustable, heated, and folding exterior mirrors Central locking with remote control Fog lights Front airbags for driver and passenger Spare wheel and jack Vehicle has a speed limiter of 130 km/h Rear double doors without glazing, opening angle 180 degrees Sliding door in the cargo area, right side Body: L2H1, long wheelbase panel van Wheelbase 3275 mm Floor covering in the cab: plastic Steering wheel adjustable Driver's seat with fold-out armrest, adjustable in several ways: - Seat height, backrest, lumbar support 6-speed manual transmission Heat-insulating glazing Cargo area fittings: Würth workshop fittings (similar to Aluca, Bott, Sortimo). Left side with shelving unit including shelf compartments, storage compartments, 3 drawers. Right side with shelving unit including storage compartments. Cargo area partition without window. Robust wooden floor. Special fastening rails (in the floor, on the ceiling) and eyelets are available for securing the load. 2 tensioning rods are available. Additional LED interior lighting. Walls partially lined with hard fiberboard. Mounted tires: Continental winter tires 215/60 R 17 on steel rims with approximately 7 mm tread depth in the front and approximately 8 mm in the rear. Service booklet maintained, history: 02.2022 / 23,052 km Inspection + oil change 02.2023 / 45,580 km Inspection + oil change, fuel filter - air filter - interior/carbon filter 12.2023 / 68,329 km Oil change 04.2026 / 115,217 km Inspection + oil change, fuel filter - air filter - interior/carbon filter - brake fluid, drive belt - AT clutch renewed Despite careful processing, input and data transmission errors may occur in the vehicle description including images. Errors and prior sale reserved. The vehicle can be inspected by DEKRA or TÜV if desired.

Condition: excellent (used), Year of construction: 2014, - Accessories included. - Control system: WEILER C3 based on Siemens SINUMERIK 840D WORK AREA Center height 165 mm Swinging diameter over bed 330 mm Swinging diameter over cross slide 160 mm Distance between centers 750 mm TURRET Turret head DIN 55027/DIN ISO 702-3, size 5 Spindle bore 43 mm Spindle diameter in the front bearing 70 mm MAIN DRIVE Drive power 60%/100% ED 9/7 kW Speed range 1 – 4,500 rpm Number of speeds stepless Nwjdsztxq Espfx Aprsk FEED RANGE Number stepless Longitudinal 0.001 – 10 mm/rev Transverse 0.001 – 10 mm/rev Feed force longitudinal 6,000 N Feed force transverse 3,000 N Max. rapid traverse speed longitudinal/transverse 6/3 m/min THREAD CUTTING RANGE Metric threads 0.1 – 400 mm Inch threads 56 – 1/4 threads/inch TAILSTOCK Tailstock spindle diameter 50 mm Tailstock quill stroke 110 mm Internal taper DIN 228 MK 3 mm

Condition: used, Year of construction: 1997, x-travel 1660 mm y-travel 510 mm z-travel 510 mm Control M+ Mazatrol Nwodpfxszwqcne Aprsk Table dimensions 2000x510 mm table load max. 1.000 kg number of spindle speeds 7.000 UpM tool taper SK 40 tool piece magazine with 48 Stück weight of the machine ca. 7.500 kg

Year of construction: 2006, condition: excellent (used), functionality: fully functional, For sale: C-pack VAC 983, automatic machine for packing in mesh sleeve. German-made machine. Suitable for automated production lines. Nwedsy R Rwbopfx Aprek Fully automatic packing machine for net packaging of fruits and vegetables.

Condition: like new (used), Year of construction: 2021, OMAG AFFRI WIKI 90 JS-C – Automatic Vickers/Knoop Hardness Tester | 2021 | Excellent Condition For sale is a professional automatic hardness tester, the OMAG AFFRI WIKI 90 JS-C, from the renowned Italian manufacturer AFFRI. The unit is from 2021, is fully functional, complete, and ready for operation. The hardness tester is designed for precise hardness measurements of materials in quality control laboratories, research and development departments, and production facilities. It is equipped with a digital measurement system with a camera and a computer with dedicated software that enables automatic indentation analysis. Technical Data * Manufacturer: OMAG AFFRI (Italy) * Model: WIKI 90 JS-C * Year of Manufacture: 2021 * Condition: very good, fully functional * Power Supply: 115–230 V * Weight: approx. 70 kg * Made in: Italy Equipment * Control computer with software, * Digital measurement system with camera, * XY measuring table, * Complete cabling, Nwsdpezkpptsfx Aprjk * Emergency stop switch, * Ready for immediate operation. Applications The unit is ideal for hardness measurements using the following methods: * Vickers (HV), * Knoop (HK), * (depending on the configuration, also other measurement methods). Ideal for laboratories, the automotive and aerospace industries, tool rooms, and quality control.

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: 1624, tooth pitch: 1 mm, We offer this new ILPRO Technology I80GF-C saw-blade sharpening and I70 GF setting machine, year of manufacture 2025. Model: I80GF-C sharpening machine for bandsaw blades Serial number: 1624 Year of manufacture: 2025 TECHNICAL DATA: BANDSAW BLADE Width 8-80 mm Thickness 0,4-1,2 mm Tooth pitch 1-28 mm Clearance angle 0°-12-20° Teeth/minute 10-100 Nwedpfx Ajzudfwsprsk Model: I70GF setting machine for bandsaw blades Serial number: 1625 Year of manufacture: 2025 TECHNICAL DATA: BANDSAW BLADE Width 8-80 mm Thickness 0,4-1,2 mm Tooth pitch 3-28 mm Clearence angle 0°-12-20° Teeth per minute 120-200 If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, drying oven, tempering oven Caltherm 150 C Nsdpjvpagdjfx Aprewk For sale in excellent condition CALTHERM manufactured air mixing multi-purpose Convection oven heat treatment oven electric heated oven with one chamber, air mixing Max temp: 150°C internal dimensions: length: 200cm height: 200cm width: 100cm electronic heating elements 8pcs air circulation fan: 4kw 380v 50Hz temperature range: 50-160 Celsius external dimensions:

Condition: used, Year of construction: 1995, working width: 1,300 mm, compressed air connection: 7 bar, Machine type: Coating system for coating, lacquering, and laminating from roll to roll using solvent-free adhesives. Manufacturer: NORDMECCANICA Type: Duplex Compact Model: Duplex C - SL1300 Year of construction: 1995 Web width: 650 to 1,310 mm Laminating width: Up to 1,300 mm Speed: Mechanically up to 300 m/min. Materials for coating: BOPP 15 - 80 µm PETP 12 - 30 µm LDPE, LLDPE 40 - 200 µm OPA 12 - 18 µm NYLON CAST 50 - 80 µm ALUMINUM 15 - 40 µm PP CAST 60 - 150 µm SATIN PAPER 40 - 300 g/m2 Materials for lamination: BOPP 12 - 80 µm PETP 12 - 30 µm LDPE, LLDPE 20 - 200 µm OPA 12 - 18 µm NYLON CAST 20 - 80 µm ALUMINUM 7 - 40 µm PP CAST 25 - 150 µm EVOH 12 - 20 µm CAST MATERIALS 25 - 200 µm SATIN PAPER 40 - 300 g/m2 Unwinding unit A: Model 850 Roll change: Automatic up to 300 µm Roll diameter: 90 to 850 mm Roll weight: Up to 900 kg Core diameter: 70 / 76 / 150 / 152 mm Web tension: 2.5 to 55 kg Layer thickness: Up to 300 µm Pre-treatment: Corona Unwinding unit B: Model 850 Roll change: Automatic up to 300 µm Roll diameter: 90 to 850 mm Roll weight: Up to 900 kg Core diameter: 70 / 76 / 150 / 152 mm Web tension: 2.5 to 55 kg Layer thickness: Up to 300 µm Pre-treatment: Corona Coating and laminating unit: For solvent-free adhesives. Coating unit with 4 rollers, 2 of which are heated. Laminating unit with 3 rollers. Rewinding unit: Model 850 Roll change: Automatic up to 300 µm Roll diameter: 170 to 850 mm Roll weight: Up to 900 kg Core diameter: 150 / 152 mm Web tension: 6 to 55 kg Layer thickness: Up to 500 µm Mixing and metering unit: Nwsdpjy Hgwpefx Aprek Manufacturer: DOPAG, Switzerland Model: Variomix Heating elements. Electrical connection: 220 / 3 x 400 V, 50 Hz Installed power 180 kW Maximum current consumption 90 amps Average power consumption 35 kW Compressed air connection: Inlet pressure: 7 and 10 bar Consumption max. 400 liters/min. Water consumption: 2000 liters/hour Standards: CE, CEE 89 / 392 ff. EN 60 204-1, SUVA Condition: Used. Availability: Available immediately.

Condition: ready for operation (used), Year of construction: 2019, clamping force: 400 kN, overall weight: 2,180 kg, controller manufacturer: ARBURG, controller model: SELOGICA direct, Hydraulic injection moulding machine manufactured in 2019. This Arburg ALLROUNDER 270 C 400-100 features a clamping force of 400 kN and an opening stroke of 350 mm. It has a maximum injection pressure of 2500 bar and a shot weight of up to 29 g. If you are looking to get high-quality injection moulding capabilities, consider the Arburg ALLROUNDER 270 C 400-100 machine we have for sale. Contact us for further details. Nsdjzvm Azopfx Aprewk - Control System: SELOGICA direct- Clamping Force: 400 kN- Opening Force: 130 kN- Opening Stroke: max. 350 mm- Mold Mounting Height (min.): 200 mm- Platen Distance (max.): 550 mm- Distance Between Tie-Bars (H x V): 270 x 270 mm- Size of Mold Platens (H x V): max. 446 x 446 mm- Weight of Movable Mold Half: max. 180 kg- Ejector Force / Stroke: max. 30 kN / 125 mm- Dry Cycle Time (EUROMAP): 1.2 - 189 s-mm- Injection Unit Size: 100- Screw Diameter: 20 mm- Effective Screw Length (L/D): 25- Screw Stroke: max. 100 mm- Calculated Stroke Volume: max. 31 cm³- Shot Weight (PS): max. 29 g- Material Throughput (PS / PA6.6): max. 5.5 kg/h / 2.8 kg/h- Max. Injection Pressure: 2500 bar- Max. Holding Pressure: 2500 bar- Max. Injection Rate: 64 cm³/s- Max. Screw Torque: 120 Nm- Nozzle Contact Force / Retraction Stroke: max. 50 kN / 180 mm- Heating Capacity: 4.95 kW- Hopper Capacity: 1.8 L- Operating Voltage: 400 V 3~ 50 Hz- Control Voltage: 230 V ~ 50 Hz / 24 V DC- Motor / Heating Rated Current: 42 A / 11 A- Total Rated Current: 53 A- Total Connected Load: 29 kW- Pump Motor Power: 11 kW- Hydraulic Oil Capacity: 165 L- Net Machine Weight: 2,180 kg

Condition: good (used), Kuka Robot KR 16-2 C-F KCP4 Industrial robot Nwodjzwc Ucspfx Aprek KR C4 robot Complete and fully operational

Condition: good (used), Year of construction: 1996, functionality: fully functional, Work area: 800x600x500 Rapid traverse rate: 30 m/min Spindle speed: 15000 RPM, SK40 NC rotary table, diameter = 280 mm Electronic handwheel module Electrical thermal expansion compensation Ethernet interface, TNC 426/430 Measuring probe system, SK40, Renishaw Nwodpfxezv Syfo Aprok Chip conveyor without chip cart Enclosed cabin roof section Air blow-off device, C800 The spindle was replaced in May 2018 with a total operating time of 25,185 hours. The current operating time is 31,083 hours. This means that the spindle has been in operation for 5,898 hours since its replacement.

Condition: good (used), mileage: 4,00,441 km, power: 132 kW (179.47 HP), first registration: 03/2018, fuel type: diesel, tire size: 195/75R16, axle configuration: 4x2, wheelbase: 3,520 mm, fuel: diesel, color: white, driver cabin: day cab, gearing type: mechanical, number of gears: 6, suspension: other, number of seats: 3, total length: 6,140 mm, total width: 2,050 mm, total height: 2,650 mm, loading space length: 3,510 mm, loading space width: 1,780 mm, loading space height: 1,900 mm, Year of construction: 2018, Equipment: ABS, Bluetooth, air conditioning, central locking, cruise control, electric window regulation, power mirror, traction control, = Additional Options and Accessories = - Heated mirrors - Halogen lamp - None - Manual - Radio/cassette - Fabric - Partition = Notes = Configuration: 4x2, dual tires, unladen weight: 2654 kg, gross vehicle weight: 3500 kg, cab type: single cab, cruise control, air conditioning, number of airbags: 1, parking assistance: None, electric windows, electric mirrors, partition, radio/cassette, color: White, heated mirrors, type of lighting: halogen lamp, Bluetooth, engine power: 132 kW (177 hp), fuel: diesel, drive technology: timing chain, transmission type: manual, gears: 6, power steering, ABS, ASR, starter battery, body type: extended and raised, step at the rear, roof rack: None, side doors: 1, rear closure: double door, central locking, number of seats: 3, seat configuration: 1+2, seat cover: fabric, seat adjustment: manual, L2H2, 3.0L 180 hp, dual tires, air conditioning, tow bar, spare wheel, tire type: summer tires = Further Information = General information Number of doors: 1 License plate: KLEYN1 Axle configuration Tire size: 195/75R16 Brakes: disc brakes Axle 1: tire tread left: 5 mm; tire tread right: 1 mm; suspension: trapezoid suspension Axle 2: dual tires; tire tread left inside: 2 mm; tire tread left outside: 7 mm; tire tread right inside: 3 mm; tire tread right outside: 2 mm; suspension: leaf spring suspension Weights Unladen weight: 2,654 kg Payload: 846 kg GVW: 3,500 kg Functional Loading area height: 72 cm Environment Emission class: Euro 0 Condition Technical condition: good Optical condition: good Damage: none Number of keys: 1 = Company Information = Kleyn Trucks is one of the largest independent used vehicle dealers in the world. Here you can choose from a constantly changing stock of 1200 used trucks, tractor units, and trailers. Our range includes all European brands from various years of manufacture and price ranges. Why buy from Kleyn Trucks? Simple! • Large and rapidly changing stock • Recognizable quality • A good price • Proper business practices • We speak many languages • We understand our customers • Support for import and transport • (Export) registration is quickly arranged • Expert technical services • The security of "recognizable quality" • And more... Nwedpfxezw A Ame Aprjk Please visit our website for special offers and a complete stock overview: Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your lease rate and submit a request via our website. Inquire directly about our European warranty package.

Condition: good (used), Griggio C100 Multi-blade circular saw Njdpfxozv Rubo Aprowk - Max. cutting height: 10 cm - Track width: 15 cm - Motor power: 18.5 kW - Stepless feed rate control via frequency inverter - Spindle diameter: 70 mm - Laser Machine dimensions: Length 120 cm, width 80 cm Machine in very good condition; can be connected to the power supply.

Condition: used, mileage: 4,89,589 km, power: 125 kW (169.95 HP), first registration: 03/1998, fuel type: diesel, overall weight: 7,490 kg, next inspection (TÜV): 01/2026, color: orange, gearing type: mechanical, number of seats: 2, total length: 7,980 mm, total width: 2,550 mm, total height: 3,450 mm, Equipment: ABS, * Electric windows * Seat heating * Sun visor ----* 8-speed manual transmission * Leaf spring suspension * Rocker arm hitch * Ball hitch ----* Platform body with folding side panels * 1 section with tarpaulin Njdjy D Dmcspfx Aprewk ----* Tire dimension front axle: 235/75R17.5 * Tire dimension rear axle: 235/75R17.5 * Fuel tank: * Technically permissible gross weight: 7490 kg * Unladen weight: 4820 kg * Permissible trailer load: 10510 kg * Overall length: 7980 mm * Wheelbase: ----Vehicle number: 11907----Errors and prior sale excepted----Advertisements and various lettering have been digitally removed.-----We will be happy to assist you with all formalities involved in purchasing a vehicle. Simply let us know your wishes and suggestions, and we will take care of them. Among other things, we can offer you the following services for an additional charge:----Trade-in of your old vehicle, TÜV/SP inspection, complete export processing, arrangement of financing, application for export license plates, vehicle delivery, vehicle registration, recovery and vehicle transport----YOUR VTS TEAM

Condition: ready for operation (used), Year of construction: 2015, controller manufacturer: KUKA, This KUKA KR270 R2700 C ultra MED robot arm was manufactured in 2015. Ideal for precise automation tasks, it offers robust performance and reliability. Contact us for more information. Additional equipment • Resolver Cable: 16m • Motor Cable: X7.x flexible, 15m; X30 flexible, 15m • Three-phase Servo Motor: TYP-K/1FK7103 • Reference Switch Assembly: 25m angled / Reference Switch Unit: Cable trailing 15.0m • Adjustment Equipment Set for Additional Axes • SmartPAD: 1.0 / SmartPAD Holder: Medweiß 610 / Extension Cable SmartPAD: 25m and 10m • Scope of delivery: Robot, control cabinet & cable. Machine Benefits Technical Machine Benefits • Production hours: less than 1000 machine hours • Positioning robot: kr c4 / special paint finish: mechanics and base / cooling: standard medwhite 610 / krc4 basic enclosure: eu medwhite / disconnector: 8 kva 380/400/440-400/230v, 25a Nwedpfx Aezvv E Sjprek • Mains supply: eu han6 transformer 8 kva mbc / enclosure paint: siemens white 610 /labeling set: de/en kr c4 • Ethernet interface: x67. 1-3 / reference switch interface: x42 / external power supply interface: x55 / csp standard: 2xusb3. 0 / rj45 - ksi • Controller: mcc-30s med / kss: 8. 3/ safe operation: 3. 2 / ethernet krl: 2. 2 / robot sensor interface: 3. 2 / remote service: 1. 1 / profinet controller/device: 3. 1 • Load: 270 kg / range: 2696 mm

Condition: good (used), Year of construction: 2015, functionality: fully functional, Technical details x-travel 1050 mm y-travel 530 mm z-travel 630 mm Control Heidenhain TNC 620 table surface area 1150 x 560 mm tool taper SK 40 spindle turning speed range 10000 U/min rapid traverse 24 m/min total power requirement 25 kVA weight of the machine ca. 7,8 t dimensions of the machine ca. 4,3 x 2,4 x 2,9 m Additional information Working hours (date 10. July 2026): - Control on: 20811 h - Machine on: 13353 h - Programm cycle: 7412 h - Spindle hours : 5184 h Equipment: CNC control Heidenhain TNC 620 Electronic handwheel Heidenhain Njdpfszrukfox Aprewk Tool measuring system Linear scales in all axes X/Y/Z Preparation for measuring probe 30-station tool changer Coolant equipment with paper band filter system Internal coolant supply through the spindle 20 bar Blown air through the spindle Chip conveyor Machine documentation

Year of construction: 2014, condition: ready for operation (used), A conveyor system is available for the transfer of Euro pallets to a warehouse automation, suitable for weighing, barcode scanning of the pallet, optional film wrapping, measuring, output to two output places or in case of error to a separate place, with pallet wrapper C&C group C-ONE EXTREMA, pallet dimensions: 1200x800mm, max. pallet weight: 1t, including documentation, control cabinets and accessories. Nwodolcdf Dspfx Aprsk

Year of construction: 2012, condition: excellent (used), functionality: fully functional, Fitotron® modular plant growth chambers, Type HGC 1014 V, incl. HQI-T and Krypton lighting module Temperature range +5°C to +45°C for temperature testing Test chamber volume approx. 1300 L Simpac control system Network connection USB port The Fitotron® HGC series plant growth chambers feature a modular design. Individual modules can be added or exchanged as needed, allowing the units to be adapted for various applications. They are suitable for plants with high light requirements, such as wheat, maize, cotton, rice, and C4 plants. Lighting: HQI-BT-400 W/D and 100 W Temperature range: +5°C to +45°C Njdszpv Iaspfx Aprjwk Temporal temperature fluctuation: ± 0.5 K Humidity range: 40% to 95% Dew point range: +4°C to +35°C Temporal humidity fluctuation: ± 3% to 5% RH Fresh air supply: up to 7.5 m³/h Power consumption (without fresh air operation at 25°C / 75% RH): approx. 0.8 kW Specifications for climatic testing with irradiation Temperature range: +10°C to +45°C (with lights on) Temporal temperature fluctuation: ± 0.5 K Humidity range: 40% to 95% Dew point range: +4°C to +35°C Temporal humidity fluctuation: ± 3% to 5% RH Humidification and dehumidification system; stainless steel test chamber Internal dimensions: Height 1400 mm, Depth 750 mm, Width 1270 mm External dimensions: Height 1985 mm, Depth 980 mm, Width 2320 mm External dimensions with lighting module: Height 2450 mm Single-door unit with observation window Interface for computer connection Power supply: 3/N/PE 400V ±10% 50Hz CE marked, mobile, very good condition Cable/pipe port: Ø 50 mm Air cooling Refrigerant: R404A Weight: approx. 480 kg + 130 kg (lighting module) Four units of this model are available for sale. Please feel free to contact us if you have any further questions.