Used Hinomoto C 174 for sale (54,350)

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, clamping force: 500 kN, Clamping Force: Max. 500 kN. Distance Between Tie Bars: 320 x 320 mm. Opening Force | Stroke: Max. 130 kN | 350 mm. Mould Height (fixed | variable): Min. 200 mm. Platen Daylight (fixed | variable): Max. 550 mm. Mould Mounting Platens (w x h): Max. 446 x 446 mm. Bodpfx Aoy Aybyemnjwp Weight of Movable Mould Half: Max. 180 kg. Ejector Force | Stroke: Max. 30 kN | 125 mm.

Condition: excellent (used), Vötsch Type: VC 7018 Vötsch Climatic Test Chamber VC 7018 Water-Cooled Touch Panel Control Unit On the touch panel control unit, all control and operating commands can be triggered by simply touching the function symbols. Adjustable Feet To compensate for uneven floors and ensure adequate ventilation of the machine section, the test chamber is equipped with adjustable feet. Ports The test chamber is equipped with port holes on the right and left sides. These allow measurement cables and test equipment to be routed into the test chamber. Feedthrough included in standard equipment R1: NW 125 mm Bsdpfezh Huhsx Amnewp L1: NW 50 mm Test chamber dimensions: Width 580 mm x Depth 450 mm x Height 750 mm Housing dimensions: Width 870 mm x Depth 1280 mm x Height 1745 mm Characteristics for temperature tests: Temperature range: -70°C to +180°C Temperature ±0.1 to ±0.5 K Spatial ±0.5 to ±2.0 K Temperature change rate according to IEC 60068-3-5 Heating: 4 K/min Cooling: 2.3 K/min Characteristics for climatic tests: Temperature range: -10°C to +95°C Humidity range: 10% to 98% r.h. F. Temperature deviation over time in the center of the usable space ± 0.1 to ± 0.3 K Temperature deviation over space ± 0.5 to ± 1.0 K Temperature gradient 1 to 2 K Humidity deviation over time in the center of the usable space ± 1 to ± 3 %RH Electrical connection: Nominal voltage: 3/N/PE AC 400V ±10 50Hz Nominal power: 5.9 kW Nominal current: 12.0 A Connection cable: 3.5 m Fuse protection: 16 A slow-blow, provided by the customer Refrigerants: R-404A and R-23 Test chamber capacity: approx. 190 liters Weight: approx. 460 kg net For your safety, the following information is provided as a buyer! The following steps are performed on our offered chambers in advance: 1. Functional testing and replacement of necessary components 2. Refilling with legally compliant refrigerant, if necessary 3. Leak testing with a certificate 4. After successful testing, the chambers are subjected to a documented test run. Condition: Used Scope of delivery: (See image) (Subject to change and errors in the technical data, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Condition: excellent (used), CTS Type: T-40/600 /011232 CTS Temperature Test Chamber, Water-Cooled Including metal struts to increase the floor load capacity Test chamber volume: 600 liters Bsdpozh Htwefx Amnjwp Test chamber dimensions: Height approx. 850 mm, width approx. 850 mm, depth approx. 830 mm External dimensions: Height approx. 1900 mm, width approx. 1050 mm, depth approx. 1850 mm Temperature operating range: Temperature range: -40 to +180°C Temperature deviation: ±0.1 to ±0.3 K over time Heating rate: 2.5 K/min Cooling rate: 3 K/min Electrical connection: 400 V +6% -10%, 3/N, 50 Hz Rated power: approx. 5.5 kW Rated current: approx. 8.5 A Refrigerant: R-404A Weight: 550 kg For your security as a buyer, please note the following information: The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by telephone.

Condition: excellent (used), TIRA Type: TCC 7120 Temperature range: -75°C / +180°C Air-cooled condenser Temperature stability (over time and in the center of the usable space): ±0.1°C ... ±0.3°C Maximum temperature change rate: Heating: 4°C/min Cooling: 3°C/min Humidity range: 10% to 98% relative humidity Humidity stability over time: ±1% to ±3% Dew point range during long-term tests: +2 / +94 °C Dew point range during short-term tests: -20 / +2 °C External dimensions (L x W x H): 1320 x 2235 x 2137 mm Test chamber dimensions (L x W x H): 1000 x 1130 x 1020 mm Test chamber volume: approx. 1152 liters Max. load per shelf: 50 kg Maximum floor load of the test chamber: 100 kg Refrigerant: R404A and R23 Bwsdpozh Htqsfx Amnjp Power supply: 400V + 6%/-10% / 50Hz / 3P+N+PE Rated power: 10.2 max. 17.5 kW Rated current: 19.5 max. 32.0 A Noise level: approx. 80 dB(A) Weight: 1180 kg For your security as a buyer, please note the following: The following points will be carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers will be subjected to a documented test run. Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data and specifications are subject to change!) We will gladly answer any further questions you may have by phone.

Condition: excellent (used), Espec Type: TSA-202E-W Temperature shock chamber, water-cooled Cold chamber: -55°C to 0°C Hot chamber: +50°C to 200°C System: Two-zone testing via damper control Temperature fluctuation: ±0.5°C Hot chamber: Temperature: Heating time: from ambient temperature (20°C) to +200°C within 15 minutes. Cold chamber: Temperature: Cooling time: from ambient temperature (20°C) to -55°C within 35 minutes. Temperature: Recovery time: within 5 minutes. Internal dimensions (W x H x D mm): 650 x 460 x 670 External dimensions (W x H x D mm): 1550 x 1900 x 1670 Approx. 200 liters Power supply: 400 V AC 50Hz: 65 A Refrigerant: R404A 5 kg, R23 2.0 kg Weight: approx. 1200 kg For your safety as a buyer, please note the following information: The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components Bedpfx Aezh Htkjmnewp 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of supply: (See picture) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by phone.

Condition: excellent (used), Year of construction: 2005, saw blade diameter 360 / 400 / 425 mm cutting diameter 10 - 140 mm cutting speed 8 - 150 m/min required cooling water max. 40 l/min Bwsdpfovzt Eqox Amnop height of material-table 950 mm max. travel between columns 680 mm control Siemens Simatic total power requirement 28 kW weight of the machine ca. 4,2 t dimensions of the machine ca. 2,8 x 1,8 x 2,2 m

Condition: excellent (used), Vötsch Type: VBT 03/500 Air-cooled Temperature test chamber with spray device Technical description: Data for temperature tests without water: Temperature range -30°C to +80°C Temperature deviation in the stabilized state according to IEC 60068-3-5, depending on the test chamber temperature ± 1 K over time Temperature change rate according to IEC 60068-3-5 Heating: approx. 2 K/min. Cooling: approx. 2 K/min. Data for temperature tests with water Temperature range +5°C to +80°C Possible water level -10 mm to 540 mm Water level = -10 mm The water level is below the support grid Water level = 0 mm The water level is at the top edge of the support grid Data for spray device, standard Number of spray nozzles 6 Spray volume per nozzle 0.5 l/min Data for spray device according to EN 539-2, Method B Number of spray nozzles 6 Spray volume per nozzle 4.5 l/min Additional flooding nozzles 2 Spray volume additional nozzle 6 l/min Compressed air consumption approx. 3 m³/h Bedozh D S Repfx Amnswp Data for water tank with preheating Volume approx. 2000 l Temperature range for preheating +5°C to +40°C Temperature change duration Cooling from +18°C to +5°C approx. 15 h Heating from +15°C to +40°C approx. 10 h Data for installation and operation: Test chamber: Width 1120 mm, Depth 840 mm, Height 540 mm Housing: Width 2700 mm, Depth 1300 mm, Height 1575 mm Water tank: Width 1100 mm, Depth 800 mm, Height 2200 mm Feedthroughs 1 feedthrough ∅ 50 mm, installed on the left Test chamber volume: approx. 500 liters Refrigerant R-404a Electrical connection: Rated voltage 3/N/PE AC 400V ± 10% 50Hz Rated power approx. 26 kW Rated current approx. 44.0 A (neutral conductor loaded) Fuse 63 A gG, on-site Weight approx. 890 kg net For your safety as a buyer, the following information! The following points will be carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers will be subjected to a documented test run. Condition: used Scope of supply: (See picture) (Changes and errors in the technical data and specifications are subject to change!) We will gladly answer any further questions you may have over the phone.

Condition: excellent (used), Weiss Type: WK-600/70 (I)-(II) 2 G EEx /22605147 Weiss Climate Chamber, Water-Cooled (Test chamber, explosion-proof) INERTIZATION WITH NITROGEN / EXPLOSION-PROOF TEST CHAMBER Technical Data: Test chamber designation: WK-600/70 (I)-(II) 2 G EEx External dimensions with hinges and door lock: Bwodozh D Ryopfx Amnjp Height 1995 mm, Width 1090 mm, Depth 1660 mm External dimensions without hinges and door lock: Height 1995 mm, Width 1000 mm, Depth 1660 mm Test chamber volume: approx. 600 liters Cold/Heat operation: -70 to 180°C Climate operation: 10 – 95°C Humidity: 10...98 % RH Temperature change per unit of time: Cooling: approx. 2.5 K/min Heating: approx. 4 K/min 3/N/PE AC 400V ±10% 50Hz Rated power: 14 kW Rated current: 25 A Fuse (on customer's side): 32 A, slow-blow Permissible weight of test specimens: Total load of the shelf supports: 80 kg Test chamber floor: 80 kg, insert shelf: 40 kg Weight: 800 kg Refrigerant: R 404A/R 23 (Evaporator of the air conditioning system has been replaced) For your safety as a buyer, please note the following information! The following steps are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of supply: (See picture) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by phone.

Condition: excellent (used), Climate chambers Type: EXCAL 1413-HA Air-cooled climate chamber Bwjdpfxszh D Rte Amnep EXCAL is equipped with a 15-inch capacitive multi-touch panel PC, SSD storage, Windows 7, and 2 USB ports. This makes it state-of-the-art. Technical data: Test chamber dimensions: Width 550 mm x Depth 500 mm x Height 500 mm Housing dimensions: Width 820 mm x Depth 1375 mm x Height 1730 mm Window 350 x 380 Volume: 138 liters Feedthrough installed as standard R1: 80 mm ∅ L1: 80 mm ∅ Data for temperature tests: Temperature range: -40°C to +180°C Temperature deviation over time ± 0.1 to ± 0.3 K Temperature homogeneity spatially ± 0.5 to ± 1.8 K Temperature change rate Heating: 15 K/min Cooling: 10 K/min Data for climate tests: Temperature range +10 to +90 °C Humidity range 10 to 98 % RH Data for operation: 3/N/Ph+T 400V ±10% 50 Hz Rated power 9.8 kVA Refrigerant R-404A / R-23 Weight: 430 kg For your peace of mind as a buyer, please note the following: The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data and information are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: good (used), CTS Type: T-70/600/S Water-cooled temperature testing chamber Refrigerant: Converted to R-452A Control: - 32-bit controller - LCD control panel - Digital display of setpoint and actual values - Numerical input of setpoints - Error messages in plain text - RS 232 interface - Free switching channels for on-site control of the test item Technical performance data Temperature tests: Temperature range -70 °C to +180 °C Temperature deviation ±0.1 to ±0.3 K over time Temperature change rate according to IEC 60068-3-5 Heating 2.5 K/min Cooling 2.5 K/min Heat radiation approx. 2500 W at +20 °C approx. 2500 W at +0 °C approx. 1800 W at -40 °C The technical data refer to an ambient temperature of +25 °C, rated voltage 400 V, without test item, without radiation, and without additional equipment. Dimensions: Test volume 600 liters Test chamber dimensions: height, approx. 850 mm, width, approx. 850 mm, depth, approx. 830 mm External dimensions: height, approx. 1900 mm, width, approx. 1120 mm, depth, approx. 1875 mm Operating data: Electrical connection 400 V +6/-10 %, 3/N, 50 Hz Rated power 8.8 kW Rated current 14.8 A Protection class IP 22 Weight approx. 700 kg Refrigerant: R-452A / R23 Weight: 700 kg For your security as a buyer, please note the following information! The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components Bwodpfx Amozh D E Rsnsp 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have on the phone.

Condition: used, functionality: fully functional, Vertical Honing Machine WMW VEB SZS 200x1000 C – in good working condition, under power For sale: vertical honing machine from the well-known German manufacturer VEB Werkzeugmaschinenkombinat, model SZS 200x1000 C. The machine is in good technical condition, hower not under power currently. Suitable for precise machining of cylindrical bores. Condition and availability Condition: used, NOT under power Availability: immediately available Technical specifications Max honing length: 1000 mm Max honing diameter: 200 mm Additional information Assistance with transport can be arranged Bsdpeyy N Drsfx Amnowp

Condition: used, Year of construction: 1988, functionality: fully functional, Gear Grinding Machine VEB ZSTZ 630 C 3 P – 1988, Ready to Operate Description: For sale: gear grinding machine from the German manufacturer VEB Werkzeugmaschinenkombinat, model ZSTZ 630 C 3 P, year of manufacture 1988. The machine is in good technical condition, available immediately, and ready for inspection. Currently connected to power, allowing immediate testing of its operation. Bwodpsyfq E Hofx Amnop Ideal for workshops specializing in precise gear machining and industrial machine repair. Specifications: Manufacturer: VEB Werkzeugmaschinenkombinat Model: ZSTZ 630 C 3 P Year of manufacture: 1988 Condition: good technical condition Availability: immediate Ready for inspection, connected to power Contact: Please contact us for inspection arrangements or further information.

Condition: reconditioned (used), functionality: fully functional, operating pressure: 160 bar, empty load weight: 111 kg, input voltage: 400 V, warranty duration: 6 months, temperature: 155 °C, KARCHER HDS 7/16 C HOT WATER WASHER NEW COIL The device features new accessories, including a German R+M gun, stainless steel lance, steel braided hose, and a 25° power nozzle. A durable brass head with new ceramic pistons and seals guarantees long and trouble-free operation. A highly efficient three-phase motor ensures stable operation even during prolonged use. With operating parameters of 160 bar and 700 l/h, the machine can be effectively used for heavy-duty work in construction, logistics, and agriculture. Each device we offer has individually taken photos; you are buying exactly what you see. TECHNICAL DATA: Power supply voltage [V]: 400 ~ 3-phase Discharge capacity [l/h]: 700 Operating pressure [bar]: 160 Max. Heating temperature [°C]: 80-155 Connection power [kW]: 4.7 Fuel tank [l]: 15.5 Chemicals tank (l): 15.5 Hose length [m]: 10 Weight [kg]: 111 EQUIPMENT: NEW COIL NEW durable pressure gun from the German brand R+M NEW stainless steel pressure lance NEW reinforced 10m steel braided pressure hose NEW 25° power nozzle Bwodpfx Aszh E H Nsmnop WATER FILTER AND GEKA CLAW COUPLINGS - FREE KEY FEATURES: Open oil system - no operating time limits Built-in chemical tank allows for dosing of cleaning fluid directly through the machine Very clear and intuitive control panel Simple design and easy access to individual components housing make the machine user-friendly and easy to service. The RM110 water softener tank prevents corrosion and scale buildup inside the heating coil and other pipes.

Condition: good (used), mileage: 2,38,211 km, power: 331 kW (450.03 HP), first registration: 03/2018, fuel type: diesel, tire size: 385/65R22,5, axle configuration: 6x4, wheelbase: 4,910 mm, fuel: diesel, brakes: retarder, color: white, driver cabin: day cab, gearing type: automatic, number of gears: 12, emission class: euro6, suspension: air, total length: 10,300 mm, total width: 2,550 mm, total height: 3,510 mm, loading space length: 6,800 mm, loading space width: 2,500 mm, loading space height: 770 mm, Year of construction: 2018, Equipment: ABS, Bluetooth, air conditioning, central locking, crane, cruise control, electric window regulation, navigation system, power mirror, retarder, seat heater, traction control, trailer coupling, - Heated mirrors - Digital tachograph - Trip recorder (control unit) - Fixed - Halogen lamp - Short cab - Manual - Auxiliary drive - Pump - Radio/cassette - Rear view camera - Lane departure warning system - Fabric - Auxiliary braking system Number of axles: 3, Configuration: 6x4, Tare weight: 14529 kg, Gross vehicle weight: 30000 kg, Total fuel tank capacity: 300 liters, Trailer coupling, Axle pin diameter: 50 DIN, Fifth wheel coupling: Fixed, Number of differentials: 2, Winch pull force: 351 tons, Cab type: Short cab, Cruise control, Trip recorder (control unit), Digital tachograph, Air conditioning, Electric windows, Electric mirrors, Radio/cassette, GPS navigation, Color: White, Heated mirrors, Rear view camera, Lighting type: Halogen lamp, Lane departure warning system, Climate control, Seat heating, Bluetooth, Flashing lights, Engine power: 331 kW (444 hp), Fuel: Diesel, Euro: 6, Transmission type: Opti-cruise, Transmission type: Scania, Gears: 12, Auxiliary braking system, Retarder brand: Scania, Power steering, ABS, ASR, Auxiliary drive, PTO type: 1, Pump, Central locking, Seat configuration: 1+1, Seat upholstery: Fabric, Seat adjustment: Manual, Crane, Crane manufacturer: Palfinger PK 18002-EH, Crane position: Rear, PALFINGER PK18002-EH C // REMOTE CONTROLE // 6X4 // RETARDER Transmission Transmission: SCA, 12 gears, Automatic Axle configuration Brakes: Disc brakes Suspension: Air suspension Axle 1: Tire size: 385/65R22.5; Steered; Tire tread depth left: 3 mm; Tire tread depth right: 7 mm Axle 2: Tire size: 315/80R22.5; Dual tires; Tire tread depth left inner: 11 mm; Tire tread depth left outer: 11 mm; Tire tread depth right inner: 11 mm; Tire tread depth right outer: 10 mm Axle 3: Tire size: 315/80R22.5; Dual tires; Tire tread depth left inner: 5 mm; Tire tread depth left outer: 4 mm; Tire tread depth right inner: 9 mm; Tire tread depth right outer: 9 mm Weights Tare weight: 14,529 kg Payload: 15,471 kg GVW: 30,000 kg Functional Crane: Palfinger PK 18002-EH, rear of chassis Loading platform height: 125 cm Pump: Yes Condition Bwsdpfxjzh U Sus Amnep Technical condition: good Optical condition: good Damage: none Number of keys: 2 Identification License plate: KLEYN1 Kleyn Trucks is one of the world's largest independent dealers of used vehicles. Here you can choose from a constantly changing stock of 1200 used trucks, tractors, and trailers. Our range includes all European brands from various years of manufacture and price ranges. Why buy from Kleyn Trucks? It's simple! • Large, rapidly changing inventory • Recognizable quality • A good price • Proper business practices • We speak many languages • We understand our customers • Assistance with import and transport • (Export) registration can be arranged quickly • Expert technical services • The assurance of "recognizable quality" • And more... Please visit our website for special offers and a complete inventory: Leasing through Kleyn Trucks is possible in most European countries! Calculate your leasing rate quickly and submit an inquiry through our website.

Condition: used, Year of construction: 2002, machine/vehicle number: A0207001, -with belt cleaning at the machine outlet under a folding table with belt conveyor. In 2021, the PLC control, the touch screen control, and the frequency converter for the spraying-gun drive were replaced. - Manufacturer: Venjakob - Type: HGS-Duo/C - Retrofit 2026 (year of manufacture 2002) - Working width 1,300 mm - Operating side right - Price for refurbished machine - Current condition, in the refurbishment phase - Gun drive in duo design - Dry extraction - Exhaust air capacity 10,000 m³/h - Extraction nozzle diameter 500 mm - Belt conveyor system - Feed speed approx. 5 and 14 m/min - With belt cleaning system - With paint recovery via V-belt system - Gun control, touch screen - Installed color circles 1 pc. Bwodpjx Ihvvsfx Amnep - 4 Airelss sprayers, Krautzberger KAA1300 - 1 HD airless pump - Supply air filter ceiling - Suitable for water-based paints - Suitable for solvent-based paints - Control cabinet integrated into the machine. - Total connection ~ 19kW - Length: 6,485mm - Width: 3,690 mm - Height: 2,497 mm - Volts, Hz 400 / 50 - Color light gray 7035 + black - Location, in stock - Voltage fluctuations max. +/- 5% The pictures are examples of an unrefurbished spray machine of the same type. _____ Optionally, we can also provide you with a quotation for the assembly and start-up of the system, as well as training for your employees. We also offer regular maintenance and servicing of the machine on request. For further information, get in touch with us!

Condition: new, Year of construction: 2025, Base sheet fiber laser metal cutting machine with full protection Maximum cutting area reaches up to 12000mm*2500mm, suitable for a variety of cutting options. The special fiber laser nozzle and cutting process ensure faster carbon steel oxygen cutting, more gas-saving low-pressure stainless steel nitrogen cutting, and better-quality carbon steel air cutting. Cutting performance and efficiency are improved by maintaining gas flow steady with little turbulence. Fiber laser heads are able to detect jutting obstacles to effectively reduce the damage rate and save the maintenance cost of a laser cutter. The cutting process works even at the edge of thin sheets, and ensures no chatter marks. With One-click Processing, one laser cutter is able to process multiple sheets in batches with a one-off setup, achieving batch processing. Condition: New Laser Type: Fiber Laser Laser Power: 1000W - 40000W Cutting Area: 3048*1524mm - 12500*2600mm Cutting Speed: 0-110m/min Positioning accuracy: ±0.05mm Repositioning accuracy: ±0.03mm Bjdpfehv U S Tsx Amnowp Graphic Format Supported: AI, BMP, Dst, Dwg, DXF, DXP, LAS, PLT CNC or Not: Yes Cooling Mode: WATER COOLING

Condition: used, Year of construction: 2009, functionality: fully functional, machine/vehicle number: 9A5822, type of input current: three-phase, input voltage: 400 V, input current: 60 A, total height: 1,800 mm, cutting width (max.): 1,720 mm, cutting height (max.): 50 mm, compressed air connection: 6 bar, For sale is a Lectra Vectorfashion VT-FA-MH-71 automated CNC textile cutting system, offered as a complete industrial production line. This system is designed for high-volume, high-precision fabric cutting in garment manufacturing. It enables automated multi-layer cutting with consistent accuracy and significantly improves production efficiency compared to manual cutting processes. The machine has been operated as part of a dedicated and independent cutting line together with a GERBER SY 101 spreading system (unit 21 C) and a Gerber automatic fabric loader (unit 31 C). This configuration enables a fully synchronized workflow from roll loading to spreading and cutting, maximizing throughput and minimizing manual intervention. The system includes a long-format vacuum cutting table, gantry-mounted cutting head, and integrated extraction system. A computer-controlled interface ensures precise execution of cutting patterns and production workflows. The unit has been used in a professional garment factory and was operational prior to factory shutdown. Recently serviced on 27.02.2026. Video recorded in operation on 05.03.2026. Includes • Lectra Vector CNC cutting system • Gantry-mounted cutting head • Conveyorized cutting surface Bedsy Avg Eepfx Amnewp • Industrial vacuum system (approx. 30 kW class) • Dust extraction system • Computer workstation and control interface Technical Details • Manufacturer: Lectra, France • Model: VT-FA-MH-71 • Serial number: 9A5822 • Year: 2009 • Type: Automated CNC textile cutting system • Control: Computer-controlled (Lectra software environment) • Cutting method: Oscillating knife, multi-layer capable • System: Vacuum hold-down with extraction Electrical & Utility Requirements • Control cabinet: approx. 230 V, single phase • Vacuum system: approx. 400 V, 3-phase, up to 30 kW • Peak current (startup): up to approx. 60 A • Compressed air: 5–7 bar, dry and filtered • Air consumption: required for tool operation and cooling Cutting Performance • Multi-layer cutting capability (approx. 25–70 mm compressed lay height depending on material) • High acceleration and cutting speed for reduced cycle time • Repeatable precision across full table width • Continuous feeding capability for long production runs System Architecture • Gantry-driven X/Y cutting head for high-speed positioning • Vacuum table with bristle block surface for material stabilization • Conveyorized system enabling continuous material feed • Integrated extraction system for dust and fiber removal Production Advantages • Significant material savings through optimized nesting and precise cutting • Reduced labor costs compared to manual cutting processes • High throughput suitable for industrial-scale production Service & Condition Notes • Recently serviced on 27.02.2026 • Video available from operation (05.03.2026) • Machine was operational prior to factory shutdown • Typical wear consistent with industrial use • Software compatibility should be verified if upgrading control workstation Condition Used industrial condition Operational prior to shutdown Sold as-is, where-is, without warranty Typical Applications • Garment production cutting rooms • Workwear and denim production • Technical textile cutting • Upholstery and automotive textiles Location Valga, Estonia Removal & Transport Buyer responsible for dismantling, loading, and transport Professional dismantling required due to system size and complexity

Condition: new, Year of construction: 2025, Ref. -No.: 10461 Manufacturer: IGREK Type: DT 4000 Year of construction: 2025 Type of control: CNC-Steuerung Control: SIEMENS SINUMERIK 840D SL Storage location: Istanbul Country of origin: Türkiye Spindle Speeds: 4000 RPM Turning Height: 2000 mm Table Diameter: 4000 mm Spindle power: 37 kW Max. Table load: 40 t Rotate table rotation speed: 60 RPM Max. Turning diameter: 5000 mm Max. Turning height over faceplate: 2000 mm Max Spindle Torque: 1200 Nm Spindle Taper: ISO 50 Machine length: 7500 mm Machine width: 12000 mm Machine Height: 9500 mm Weight Of The Machine Ca.: 125 t Further information: Ram Slide Stroke: 2100 mm Ram Section: 350 x 350 mm Bjdpsxmd Suofx Amnewp Vertical Travel of the Moving Traverse: 2000 mm Table Drive System: Segmented Direct Drive Motors Table Torque: 8200 Nm - 14400 Nm max. Table Guide System: Hydrostatic Bearing and Guides IGREK DT 4000 – Your solution for precise heavy-duty machining The IGREK DT 4000 is a state-of-the-art CNC vertical turning center designed specifically for the precise machining of large components. Equipped with a 4,000 mm hydrostatic rotary table and a movable crossbeam, it enables the efficient machining of workpieces with a maximum turning diameter of 5,000 mm and a turning height of up to 2,000 mm. Key features: Hydrostatic rotary table: The 4,000 mm rotary table with hydrostatic bearing ensures maximum precision and smooth running when machining heavy workpieces. Movable crossbeam: The vertically movable crossbeam with a stroke of 2,000 mm offers flexibility and allows adaptation to different workpiece heights. Powerful spindle: With a spindle speed of up to 4,000 rpm and a power of 37 kW, the machine is designed for demanding machining tasks. High load capacity: The rotary table can accommodate workpieces weighing up to 40 tons, enabling the machining of large and heavy components. Multifunctional machining: Thanks to the live spindle and the precise positioning of the C-axis, milling and drilling operations are possible in addition to turning, which increases the versatility of the machine. The IGREK DT 4000 combines advanced technology with high performance and flexibility to meet the requirements of modern manufacturing processes. Its robust construction and wide range of machining options make it the ideal solution for the precise machining of large components in various industries.

Condition: used, Measuring machine with manually operated measuring arm STIEFELMAYER Measuring and marking plate made of cast steel/grey cast iron, heavily ribbed High-precision measuring plate with quality surface finish Year of manufacture: 1985 Length: 2000 mm Width: 1500 mm Thickness: 350 mm Plate thickness (top): 50 mm solid material with 300 mm ribs Working height: approx. 800 mm Bodepwpxcepfx Amnowp - with manually movable measuring arm, measuring range X=1490 mm, Y=1000 mm, Z=1250 mm - with 3-axis digital readout Grundig MZ 1030 - machined side surface at 90° angle to the table top, 2000 x 350 mm - 5 height-adjustable feet Required space (L x W x H): 2000 x 1500 x 2500 mm Weight: approx. 2600 kg In good condition

Condition: reconditioned (used), functionality: fully functional, working width: 385 mm, area performance: 1,100 m²/h, overall weight: 40 kg, warranty duration: 12 months, water tank capacity: 12 l, KARCHER BD 40/12 C Bp Pack SCRUBBER NEW SONNENSCHEIN GEL BATTERIES GF 12 025V (2x) 385mm cleaning head equipped with a new medium-hardness disc brush, enabling work on any surface. Polyurethane astringent rubbers, resistant to contact with oil liquids, greases and petroleum substances The built-in battery charger facilitates daily operation The device is equipped with a new durable suction hose The new suction turbine ensures high water suction power from the squeegee bar Each device we offer has individually taken photos, you are buying exactly the machine you see TECHNICAL DATA: Working width (mm): 385 Suction width (mm): 450 Theoretical efficiency (m²/h): 1,100 Number of brushes (pcs): 1 Brush rotation speed (rpm) 150 Clean water tank capacity (l): 12 Dirty water tank capacity (l): 12 Weight with equipment (kg): 40 INCLUDED: NEW SONNENSCHEIN GEL BATTERIES GF 12,025V (2x) NEW disc brush 385mm PPL 0.5 Bwsdozhw Hbjpfx Amnep NEW suction turbine NEW suction hose NEW drain hose Suction strip with oil-resistant rubbers Tenzi Normal liquid 5 liters - FREE KEY FEATURES: The 12 liter tank allows you to pour a large amount of cleaning solution, so you don't have to frequently stop working to refill it. Thanks to its design, the machine is very maneuverable. The small turning radius also allows work in narrow passages and alleys. The parabolic squeegee beam ensures accurate suction of the solution from the cleaned surface The large working width (385mm) ensures high surface efficiency Very clear and intuitive control panel.

Condition: used, Used machine Long belt sander Motor power: 4 PS / 3 kW Engine speed 2890 rpm Bsdpfewka I Aox Amnswp Table dimensions approx. 2460 mm x 900 mm Manual table height adjustment Transport dimensions approx. 3600 x 1600 x 1450 mm Weight approx. 500 kg Availability: at short notice Location: Röllbach

Condition: excellent (used), ESPEC TSA-72EL-A Temperature Shock Chamber Manufacturer: ESPEC Corporation Type: TSA-72EL-A Machine Type: Temperature Shock Chamber / Thermal Shock Chamber (2-Zone) Design: Water-cooled For sale is a used ESPEC temperature shock chamber, type TSA-72EL-A. This unit is suitable for reproducible temperature cycling and thermal shock testing in research, development, quality assurance, as well as for testing electronics, automotive components, aerospace parts, and materials. The switchover between the hot and cold chambers is performed automatically via a 2-zone damper system. Technical Data Test chamber volume: approx. 70 liters Internal dimensions (W x H x D): 410 x 460 x 370 mm External dimensions (W x H x D): 1,310 x 1,900 x 1,470 mm Weight: approx. 900 kg Temperature range, hot chamber: +50 °C to +200 °C Temperature range, cold chamber: -65 °C to 0 °C Temperature stability: ±0.5 °C Preheating temperature: up to +205 °C Precooling temperature: up to -75 °C Heating time: ambient temperature to +200 °C within approx. 15 minutes Cooling time: ambient temperature to -70 °C within approx. 40 minutes Temperature recovery time: ≤ 5 minutes Max. test load: 30 kg evenly distributed Cable entry: Ø 50 mm Compressed air supply: 0.4 to 0.7 MPa (4 to 7 bar) Refrigeration system / Power supply Refrigeration system: Mechanical cascade refrigeration system Refrigerant, high-temperature side: R404A Refrigerant, low-temperature side: R23 Condenser: Water-cooled Mains connection: AC 380 / 400 / 415 V 3 phases / 50 Hz Max. current draw: 45 A Equipment 10.4" TFT color touchscreen PID temperature control Program memory (RAM/ROM) Trend graph Alarm history RS-485 interface Eco mode Automatic defrost Vertical sliding door Stainless steel test chamber 2 stainless steel test inserts Mechanical cascade refrigeration system Electronic expansion valve Sirocco circulation fan Pneumatic damper switchover Cable entry Ø 50 mm Applications Temperature shock testing Temperature cycling testing Electronics testing Semiconductor testing Automotive Materials testing Component testing Quality assurance Research and development Condition Used Optical condition as shown in the pictures. Scope of supply ESPEC TSA-72EL-A Temperature Shock Chamber 2 stainless steel test inserts Bwjdpfx Aszhkfqemnop Accessories as shown in the pictures Scope of supply as pictured. Subject to change, errors and prior sale.

Condition: used, Year of construction: 1980, operating hours: 8,840 h, lifting height: 3,230 mm, fuel type: diesel, mast type: duplex, fork length: 2,190 mm, fork width: 2,280 mm, total height: 3,560 mm, total length: 5,070 mm, total width: 2,560 mm, color: blue, Empty weight: 17.000 kg Lifting capacity: 15.000 kg - Year: 1980 - Documentation available: Yes - CE certificate present: No - Serial number: B6Y 01146 - Operating hours: 8840 Bjdpfx Amey N Ubusnjwp - Lifting capacity: 15000kg - Lifting height: 3230mm - Overhead clearance: 3560mm - Free lift: 0mm - Fork length: 2190mm - Maximum fork width: 2280mm - Minimum fork width: 440mm - Number of wheels: 6 Wheels - Attachment: Side-shift - Options: Work lights, Half cabin - Mast: Duplex - Drive: Diesel - Motor brand: 3208 CAT - Transport dimensions: 5070mm x 2560mm x 3560mm (l x w x h) - Transport weight [kg]: 17000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Tess van den Boom

Condition: new, Year of construction: 2023, functionality: fully functional, Main roller dimensions…………….……195*1300 mm Number of main rollers…………….…….2 Main roller material ……………..……..Rubber Main roller motor power ……………...…….0.75 Kw Bwodpfjzhvu Dox Amnsp Motorized thickness adjustment power ……………..…..………..0.37 Kw Weight ……………..1 ton Feeding speed…………….18 m/min CE STANDARDS Safety door and emergency switches on both sides Emergency switch bars on both sides Manual cleaning brush system

Condition: used, Year of construction: 2022, x-travel 5.230 mm y-travel 2.750 mm z-travel 1.100 mm control Heidenhain TNC 640 Tool bore DIN69871 A50 BIG PLUS main drive 32/43 kW torque S1/S6-60% 752/1.011 Nm speeds Spindel stufenlos 6.000 U/min ca. 70 kw weight of the machine ca. ca. 43 t Installation dimensions (length x width x height) ca. 12,2 x 5,7 x 5,1 m In our assessment, the machine is in good used condition and can be inspected under power by appointment. Technical features & accessories: - Heidenhain TNC640 control system with HR510 handwheel and digital drives - 60-station tool changer - Internal coolant supply (ICS) for vertical spindle with 1000L tank and automatic water/air switching - Direct axis measurement via Heidenhain linear scales - Coolant system with paper belt filter and magnetic separator - Automatic central lubrication - Rigid tapping (threading without compensating holder) - Oil-cooled ball screw (internal) in the X-axis - Spindle oil cooler - Automatic machine shut-off - Screw-type chip conveyors on both sides of the table Bwodpfxjzgxgmo Amnep - Hinged-belt cross chip conveyor Accessories, pictured tools, and workholding devices are included in the scope of delivery only if specified in the additional information. Subject to change, errors in technical data/specifications, and prior sale.