Used Hofmann for sale (47)

Condition: used, empty load weight: 4,300 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 05/2016, loading space length: 7,300 mm, loading space width: 2,480 mm, loading space height: 2,680 mm, loading space volume: 49 m³, suspension: air, tire size: 385/55 R22,5, wheelbase: 5,300 mm, color: red, Equipment: ABS, Disc brake EBS Payload 13,700 kg Lifting and lowering device BPW axles Roof with Etscha Pgjdsrx Tgvepfx Aa Dog Errors excepted

Condition: used, workpiece weight 100 kg workpiece length 1000 mm diameter 500 mm centre height 280 mm total power requirement 2,5 kW weight of the machine ca. 1 t Pgodpfx Aev Nq Swsa Djg dimensions of the machine ca. 1,6x 1x1,6 m

Condition: used, Year of construction: 1993, Dowel hole drilling device: Pitch 16, 22, 25, 32 Drilling depth: 145 mm Slot length: 240 mm Height adjustment range: 135 mm Pedpfewhuu Eox Aa Dogg Motor power: 1.3 / 1.8 kW Speed: 1400 / 2800 rpm Holder clamp: manual Extraction connection: 100 mm Machine length: 1280 mm Machine width: 960 mm Weight: 300 kg

Condition: used, Year of construction: 1996, Used machine Year of manufacture: 1996 The basic principle of Hofmann machines is the proven cast iron construction. Grey cast iron is by far the leader in vibration damping, compressive strength, and load capacity. Milling arbor 30 mm with right and left-hand rotation Milling fence with stop jaws and central adjustment, as well as single-sided fine adjustment of the jaws Pgodpfxewwxzhs Aa Dog Table size: 1200 x 820 mm Manual height adjustment with digital display and zero reset button Table height: 890 mm Motor power: 5.0/6.2 kW Spindle speeds: 3000/4000/5000/6000/8000/10000 rpm Height adjustment: 125 mm Chip extraction port: 110/120 mm Equipped with Holz Her 2-roller power feed unit Weight: 850 kg Photos show the machine in its non-refurbished condition! Availability: short notice Location: Flörsheim

Condition: new, 3-way connection with plug-in coupling and connection thread 1/2 " Psdpfogz S Svjx Aa Dogg 3 pieces available

Condition: used, machine/vehicle number: 9029, table size: 400 mm Ø height: 135 mm dimensions: 500 x 500 x 135 mm Pgedpfx Aas N Ra Rj Djg

Condition: good (used), Year of construction: 1996, Test specimen diameter: 320 mm Pedpev E D Nuofx Aa Degg Test specimen width: 140 mm Test specimen weight: 20 kg Test mandrel length: 178 mm Test mandrel pin diameter: 15 mm Weight: 4.7 kg Space required: 420 x 280 x 350 mm

Condition: good (used), Year of construction: 1999, functionality: fully functional, height adjustment type: electric, table height: 860 mm, table length: 2,000 mm, power: 75 kW (101.97 HP), table width: 800 mm, total height: 860 mm, type of input current: AC, total length: 2,000 mm, total width: 1,200 mm, spindle diameter: 30 mm, pivoting range: 45 °, spindle speed (max.): 10,000 rpm, spindle speed (min.): 1,500 rpm, overall weight: 920 kg, workpiece weight (max.): 1,060 kg, opening width: 370 mm, input voltage: 400 V, rotational speed (min.): 10,000 rpm, clamping height: 125 mm, rotational speed (max.): 10,000 rpm, Machine no: 128-29225 Type: TFS 2000 Built in 1999. Engine: 7.5 Kw Pgodpfsvn Rb Aox Aa Dsg Suva matic

Condition: used, Year of construction: 1982, workpiece weight 60 kg Pgjdpfxet Hxbqs Aa Deg workpiece length 700 mm diameter 500 mm total power requirement kW weight of the machine ca. t dimensions of the machine ca. m

Year of construction: 2004, condition: excellent (used), HOFMANN swivel spindle milling machine TFS 1200 Year of manufacture 2004 S/N 127-01323 Pgsdpfx Asm Tg Ecoa Djg manufacturer: Hofmann Bad Windsheim from a training company very good condition manual height and swivel adjustment for fine tuning analog display for height adjustment, height adjustment 125mm table size 1200 x 820mm and table extension 200 x 820mm swivel range -5° to + 45 spindle speed 3000/4000/5000/6000/8000/10000 rpm. milling spindle D=30mm milling arbor MK5 motor 4,7 Kw / 6,3 PS Suction nozzle D=120 mm Lateral roller table with eccentric hold-down and adjustable angle stop Height adjustable with hand wheel CE mark Weight 1300 Kg

Condition: good (used), Year of construction: 2009, Horizontal: Yes Vertical: Yes Diameter: 220mm indexing: 360.000° Psdpfswvq Taex Aa Dsgg Centre height:220mm Control system:Siemens 840D Length: 600mm Width: 400mm Height: 800mm Weight: 200kg

Condition: good (used), Year of construction: 1996, 2 pieces Pgedpsrtngcefx Aa Dog Fab. Hofmann Year of construction 1996 Bale size (channel size)= 80 x 60 cm Bale weight e.g. hay = 220 kg/bale with 1.4 m bale length Hydr. baling pressure = 300 bar Automatic bale tying with 3 wires Ø 3.1 mm Baling capacity approx. 5 t/h Motor power = 18 kW incl. collecting screw under baler incl. electrical control with Wago PLC (year of manufacture 2022) undismantled

Condition: used, mileage: 2,63,069 km, power: 154 kW (209.38 HP), gearing type: mechanical, fuel type: diesel, color: orange, overall weight: 16,000 kg, empty load weight: 9,840 kg, number of seats: 3, first registration: 06/2002, Year of construction: 2002, operating hours: 10,533 h, Equipment: additional headlights, cabin, hydraulics, Road marking machine: + Hofmann + H75-1000 + Thermoplastic + Electric heater (400V) + Thermoplastic tank with gas heater and hydraulic agitator + Paint and bead spray left / right + Line segment computer + Rear and front warning system + CompAir DLT 0404 compressor with Deutz diesel engine (9,513 operating hours) + Kubota Diesel V1505 drive engine (22,975 operating hours) + Renault Midlum 210 chassis + First registered: 10.06.2002 + 263,069 km; 10,533 operating hours + 3-seater + Manual transmission with reduction gear Pgedpfx Asxal A Uoa Deg + Hand throttle Unladen weight: 9,840 kg; permissible total weight: 16,000 kg + 813 cm x 250 cm x 325 cm (LxWxH) Receive all newly listed vehicles by email – sign up for our NEWSLETTER! Errors and omissions excepted, subject to prior sale!

Condition: ready for operation (used), functionality: fully functional, empty load weight: 120 kg, color: white, Year of construction: 2004, Marking machine: Pjdpfx Aaowift Ij Dogg + Hofmann + H5-1 + Year of manufacture 2004 + 120 kg + Honda GX160 engine 5.5 HP + From municipal stock Receive all newly listed vehicles by email – sign up for our NEWSLETTER! Errors and typos possible, subject to prior sale!

Condition: defective spare-parts repository (used), functionality: not functional, power: 6.62 kW (9.00 HP), fuel type: gasoline, color: orange, empty load weight: 175 kg, Year of construction: 1995, Marking machine: + Hofmann + H8-1 + Year of manufacture 1995 + 175 kg + 9.0 HP Honda engine + Engine + Compressor OK + Spare parts carrier Pjdpfx Aaswkf Ete Degg Receive all newly listed vehicles by email – sign up for our NEWSLETTER! Errors and typos possible, subject to prior sale!

Condition: used, Year of construction: 2006, Machine including brand new 2-jaw chuck Machine cleaned, lubricated, partially overhauled, test run performed Drill chuck replaced. Chuck runout: 0.03 mm Used, top condition, low operating hours Make: Hofmann Model: LB 760 Year of manufacture: 2006 Machine no.: 76-01420 CE type-examined Motor: 1.8 kW, 2 speeds Table size: 760 mm Drill capacity: 0–20 mm Drill chuck: 20 mm Dowel boring device with 4 position stops Workpiece stop Mitre stop 45° Centre stop Motor speed: 2 settings (1500/3000 rpm) Digital height display Manual workpiece clamp, 1 x with 2 columns Extraction connection: Ø 120 mm Space requirement: approx. 1300 x 1200 x 1400 mm Weight: approx. 260 kg Pgedpfxew Ed Uio Aa Dog Location: 97447 Gerolzhofen, free loaded, unpackaged Delivery in as-inspected condition, without guarantee or warranty.

Condition: used, Year of construction: 1979, Working width 510 mm Length of the planing table 2700 mm Pgodpfxjvxa Igj Aa Deg Number of knives 2 St. Dimensions (L/W/H) 2700x1100x1000 mm weight of the machine ca. 1000 kg

Condition: reconditioned (used), Year of construction: 1985, functionality: fully functional, Power rating 380V Planer block motor 4kW 8.3A Feed motor 1x0.37kW 1x0.55kW 2x feed speeds 7 + 14 m/min Star-delta switch Planing thickness adjustable with hand crank Pgjdpjv Up R Asfx Aa Dog Planing width 510 mm Leitz reversible cutter block with 2 knives 2 table rollers Extraction connection 140 mm

Condition: reconditioned (used), Year of construction: 1974, functionality: fully functional, machine/vehicle number: 13-78-13, Connected load 3kW planing width 410 mm 2-blade shaft with strip planing blades connection suction 140 mm pick-up table length 1430 mm Pgodpfxjh U A Rao Aa Dog pick-up table length 1070 mm