Used Holzher Triathlon 1488 for sale (168)

Condition: used, Year of construction: 1989, Used machine Year of manufacture: 1989 Condition: Function tested Equipment and technical data: Klodpfx Aew I U E Aefusu Max. edge thickness: 20 mm Max. edge height: 51 mm Max. thickness of coil material: 3 mm Min. workpiece length: 140 mm Min. workpiece width: 60 mm Glue system: 1906 cartridge Pressure unit Milling unit 1920 for flush milling up to 20 mm and chamfer milling Required space (LxWxH): 3150x1800x1375 mm Weight approx.: 800 kg Location: Flörsheim Availability: Short-term

Condition: used, Year of construction: 2001, Used machine Year of manufacture: 2001 Equipment and technical data: Machine is completely workshop overhauled! Automatic horizontal and vertical positioning for absolute and incremental dimensions Digital readout for horizontal cuts PLC control with a 2-line display and plain-text error diagnosis Klodpfx Afow Nac Aeuju for operation mode and fault diagnosis Infinitely variable feed speed up to 24 m/min Automatic workpiece end detection Calculator function integrated in the control panel (calculation of workpiece dimensions) Cutting length: 4300 mm Cutting height: 2200 mm Max. trimming height: 2100 mm Max. scoring height, vertical: 2100 mm Max. cutting depth: 80 mm Motor: 5.5 kW Saw blade speed: 4,500 rpm Saw blade diameter: 300 mm Air requirement: 1,200 m³/h Air velocity: 20 m/s Static negative pressure: 1,200 Pa Extraction connection: 2 x 120 mm Dimensions (L x W x H): 5,620 (plus extraction nozzle) x 1,480 x 2,948 mm Room height: 2,990 mm Compressed air connection: 6 bar Air consumption: 50 NL/min Electrical connection load: 5.7 kW With Supercut pre-scoring unit With pneumatically swiveling saw unit With longitudinal stop for lower workpiece support With short folding rail, complete Availability: by arrangement Location: Flörsheim

Condition: used, Year of construction: 2019, Used machine Year of manufacture: 2019 Condition: Good (the machine has undergone extensive maintenance every year, most recently in March 2026!) Equipment: - iTronic – Adaptive pressure and glue quantity control with automatic, program-dependent fine adjustment - MOT SPS adjustable infeed fence - Automatic chain lubrication: Intelligent automatic transport chain lubrication - Edge Control 19 control system - EL GRM variable, 400V 50Hz, 2.2kW V2 SPRINT 1329 PERFORMANCE 400V 50Hz - Edge Control 19 control system with 18.5" touchscreen color display, 16:9 format - ECO MODE energy-saving mode: An automatic standby circuit - Jointing unit 1802 (2 x 2.0 kW, 200 Hz, 12,000 rpm) with 2 milling units for jointing panel edges - Diamond cutter, Ø 70 x 64 x 30 mm, Z2+2, left-hand rotation, Air Stream System (HOLZ-HER / LEUCO Patent) - Diamond cutter, Ø 70 x 64 x 30 mm, Z2+2, right-hand rotation, Air Stream System (HOLZ-HER / LEUCO Patent) Kedpfx Aey Hyl Tefuolu - Edge feed 1901 SYNCHRO: automatic transport of coil and strip material - Glue application station Glu Jet GJ301 automatic (2.3 kW, 50 Hz) - DW501 SPS motorized SPRINT - GM501 spray device after the printing unit with lubricant (recommended for high-gloss edges) - End trimming unit 1918 (60 mm) pneumatic (2 x 0.45 kW, 12,000 rpm) pneumatically tiltable 0/10° - Milling unit FR701: 100% repeat accuracy at the push of a button due to backlash-free mechanics - Air Stream System multi-cutter, diamond Ø 70.9 x 16 mm, Z = 2+2 - Form milling unit FF701: 100% repeat accuracy at the push of a button due to backlash-free mechanics - Diamond cutter, Ø 72.5 mm x 19 mm, Ø 20 mm Z = 4, radius R = 2 mm, left-hand rotation with CM technology - Diamond cutter, Ø 72.5 mm x 19 mm, Ø 20 mm Z = 4, radius R = 2 mm, right-hand rotation with CM technology - Scraper unit 1929 MOT4 incl. high-gloss package with motorized adjustment of the tracing rollers - HW reversible knives for scraper holder, R = 2.0 mm (2 pcs. required) - Flat scraper FK701 with pre- and post-sensing for removing adhesive residue - TR501 spray unit for infeed and outfeed (separating and cleaning agent) - Includes nesting shoes below with their own spray unit Location: Hesse Availability: Approx. July 2026

Condition: used, Year of construction: 2005, Used machine Year of manufacture: 2005 Condition: Guides slightly worn, only suitable for rough cutting Equipment and technical data: - Cutting length: 4300 mm - Max. passage height: 2200 mm - Max. trimming height: 2100 mm - Max. scoring height vertical: 2100 mm - Cutting depth: 80 mm - Motor: 5.5 kW - Saw blade speed: 4500 rpm - Saw blade diameter: 300 mm - Extraction: 2 x 100 mm Kodpfx Afswqifksujlu - Compressed air consumption: 60 NL/min Dimensions: 5620 x 1480 x 2990 mm Availability: short-term Storage location: Flörsheim

Condition: excellent (used), CATALOGUE NUMBER 8010 TECHNICAL DATA Kodsy Uvmvepfx Afuelu Equipment: - table - pre-milling - belt feeder - 2 glue tanks: for granules and cartridges - currently, the machine uses hot melt adhesive (granules) - guillotine – for pre-cutting veneer - 3 pressure rollers - 2 trimming units with saws for final trimming - 2 milling units for edge shaping (radius cutters) - corner rounding unit - sanding units – for removing excess glue - polishing units - stepless feed rate adjustment 8-18mm - workpiece thickness 6-45mm - minimum workpiece length 180mm - minimum workpiece width 600mm - maximum veneer thickness fed from a roll 3mm - air consumption 6-8 bar - dust extraction nozzle diameter 7x80mm, 1x130mm - dimensions L/W/H 6650x1260x1700mm - weight 1850kg ADVANTAGES – Made in Germany – Spray system – Pre-milling and corner rounding – 2 glue tanks – Includes 4 additional milling cutters – Unpainted – Original technical documentation and CE marking – Very good condition – Used veneer edging machine Net price: 49900 PLN Net price: 11880 EUR, depending on the exchange rate of 4.20 EUR (Prices are subject to change due to exchange rate fluctuations)

Condition: used, Year of construction: 2002, total length: 5,050 mm, total width: 2,420 mm, total height: 800 mm, Colour: Grey Weight: 750 kg - Details: Klodpfxezcng Ne Afusu - └ Description: Digital readout does not function. - Year: 2002 - Documentation available: No - CE certificate present: No - Serial number: 221 / 0-206 - Max. cutting height vertical [mm]: 1950 - Max. cutting height horizontal [mm]: 1900 - Max. cutting width [mm]: 3300 - Max. cutting depth [mm]: 50 - Max. saw blade diameter [mm]: 300 - Arbor saw blade diameter [mm]: 30 - Horizontal cutting: Yes - Vertical cutting: Yes - Voltage [V]: 400 - Fuse [A]: 16 - Transport dimensions: 5050mm x 2420mm x 800mm (l x w x h) - Transport weight [kg]: 750kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2014, operating hours: 11,517 h, Colour: Grey Empty weight: 6.000 kg - Year: 2014 - Documentation available: No - CE certificate present: No Kljdpex E Uk Usfx Afuou - Serial number: 070614/B/1-407 - Operating hours: 11517 - Number of milling spindles [pcs.]: 1 - └ Milling spindle 1: - - Number of controlled axes [pcs.]: 4 - - C-axis present: Yes - Type milling table: Flat table - Drilling unit present: Yes - └ Horizontal drill spindles [pcs.]: 6 - └ Vertical drilling spindles [pcs.]: 18 - Tool changer positions [pcs.]: 12 - System/software: TWINCAT - Safety feature: Enclosed fence, Safety mat - Vacuum pump present: Yes - └ Number [pcs.]: 2 - └ Brand: Becker - └ Year of manufacture: 2023 - └ Main motor power [kW]: 18.5 - └ Capacity [m³/h]: 600 - └ Vacuum pressure [bar]: 250 - CNC documentation available: USB stick - Working range X [mm]: 7220 - Working range Y [mm]: 1580 - Z-axis working range [mm]: 180 - Transport weight [kg]: 6000kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Condition: used, Year of construction: 2010, total height: 2,580 mm, total length: 5,500 mm, total width: 1,500 mm, Weight: 1.500 kg Price: On request - Year: 2010 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 161/1-10 - Number of units [pcs]: 7 - └ 1st unit type: Pre-milling unit - - Tools available: Yes - └ 2nd unit type: Glue unit - └ 3rd unit type: Pressure rollers - - Tools available: Yes - └ 4th unit type: Cap unit - - Tools available: Yes - └ 5th unit type: Rough milling unit - - Tools available: Yes - └ 6th unit type: Corner rounding unit - - Tools available: Yes Klsdpfoyu Tkkex Afusu - └ 7th unit type: Flat scraping unit - - Tools available: Yes - Voltage [V]: 400 - Current consumption [A]: 38.85 - Fuse [A]: 50 - Transport dimensions: 5500mm x 1500mm x 2580mm (l x w x h) - Transport weight [kg]: 1500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2011, total height: 1,730 mm, total length: 6,100 mm, total width: 1,440 mm, Colour: Grey Weight: 2.500 kg - Year: 2011 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 5/1-107 Kledpfx Afoyf Dakjusu - Number of units [pcs]: 9 - └ 1st unit type: Pre-milling unit - - Tools available: Yes - └ 2nd unit type: Glue unit - └ 3rd unit type: Pressure rollers - - Tools available: Yes - └ 4th unit type: Cap unit - - Tools available: Yes - └ 5th unit type: - - Tools available: Yes - └ 6th unit type: Corner rounding unit - - Tools available: Yes - └ 7th unit type: Radius scraping unit - - Tools available: Yes - └ 8th unit type: - - Tools available: Yes - └ 9th unit type: Flat scraping unit - - Tools available: Yes - Voltage [V]: 400 - Current consumption [A]: 21.9 - Fuse [A]: 50 - Transport dimensions: 6100mm x 1440mm x 1730mm (l x w x h) - Transport weight [kg]: 2500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, total height: 1,600 mm, total length: 1,500 mm, total width: 800 mm, overall weight: 440 kg, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Trimming unit: yes Panel support guides: yes Number of edge processing units: 1 Processing unit: rough trimming on top and bottom Number of finishing motors: 1 MACHINE DETAILS Model: UF 362 / 2713 Type: Manual sanding machine Kedpey Uwq Aofx Afuslu EQUIPMENT Trimming unit Panel support guides

Condition: excellent (used), Year of construction: 2022, • Cutting height 2200 mm x cutting length 4300 mm • Extraction to CE TRK Regulations CH 2200 (less than 2 mg of fine dust/m³ air) • Middle workpiece support - 4 zones • Sliding carriage 1255 for cutting height 2200 mm • Saw unit 4,0 kW, 5400 min-1, 400 V, 50 Hz incl. HW-saw blade Ø 250 x 30 x 3,2 mm, Z 48, Hohl-Dachzahn • Length stop (manual) with digital read out for vertical cuts. For middle workpiece support • Digital display for horizontal cuts at the control panel incl. electrical fine adjustment • 3 adjustable stop points in the saw beam for repeating horizontal cuts via stop point • Strip stop for repeating horizontal cuts, Scale in mm, max. strip height 650 mm • Narrow part device (2 pcs) Avoids tilting of workpieces • Super Cut scoring device: For scoring the surface of covered materials. • Cutting optimization Opti-Base V-Cut 1 pc 10ˇTouch-screen 1 pc Software machine Klodpfsy Nmtcex Afuju 1 pc Software office- 1 place floating network license (Opti V-Base) 1 pc label printer • Specifications are provided for information only. This machine is offered for sale on behalf of a customer. Viewing is available by prior arrangement. Please contact us through the platform's messaging system for further information and the relevant technical contact details.

Condition: used, Year of construction: 1995, from an official source used in top condition cleaned functionality tested Manufacturer: Holz-Her Type: 1117 Year of manufacture: 1995 Machine no.: 52623 GS-certified CE-type tested Motor with pole change, 2 speeds Roller diameter mm: 110 Roller width mm: 50 Number of feed rollers: 3 with stand Kodezfaw Djpfx Afuslu Speeds m/min: 8, switchable to 4 Approximate footprint (L x W x H mm): 1000x500x700 Approximate weight kg: 60 Location: 97447 Gerolzhofen, free loading, unpacked Handover in the current condition, as inspected, without warranty or guarantee

Condition: used, Year of construction: 2006, Used machine Year of manufacture: 2006 Condition: completely overhauled Equipment and technical data: - fitted with new glue application system - manually adjustable infeed fence Kljdpfx Aswka H Ssfueu - milling unit 1961 - edge feeder 1903 - glue application station 1906 with tracking nozzle - pressure unit 1816, pneumatic - end trimming unit 1822 - milling unit 1942 M for radius, chamfer, flush trimming - complete air nozzle - scraper unit 1929 - chip collection box - surface scraper 1964 - extraction hood set - complete safety covers - total length: 5,291 mm - workpiece thickness: min. 6 / max. 50 mm - edge band thickness depending on configuration: 0.4–5 mm - max. edge band height: 55 mm - minimum edge band strip length: 350 mm - max. edge band overhang/height per side: 3 mm - minimum workpiece width: 60 mm - minimum workpiece length: 180 mm - feed speed: 12.5 m/min - extraction: - jointing/milling unit: 900 m³/h - milling unit: 280 m³/h - scraper unit: 280 m³/h - static vacuum: - jointing/milling unit: 1,490 Pa - milling unit: 1,650 Pa - minimum air velocity: 20 m/sec - jointing/milling unit connection: 70 mm - scraper unit connection: 70 mm - compressed air: 6 bar Availability: short notice Location: Röllbach

Condition: used, Year of construction: 2013, Used machine Year of manufacture: 2013 Equipment and technical data: - Control unit with 15" touch screen - Jointing milling unit with 2 milling heads - Edge feed - GluJet 301 glue application system: 2.3 kW, automatic glue height adjustment, sensor nozzle - Pressure unit: pneumatic - End trimming unit: pneumatic - Diamond cutters left/right with CM technology - Corner copying unit with diamond cutters - Surface scraper - Polishing unit - Extendable workpiece support - Motorized pressure bridge adjustment with NC axis via program control - Extraction hoods for end trimming unit - Multifunction milling unit: MOT 4 - Vertical tracing rollers: pneumatic - Pneumatic tilting device for milling unit MOT 4 - Scraper unit MOT 2 with chip collection box - Spray unit for infeed and outfeed area Kjdpfxjy U R Izj Afujlu - Minimum workpiece length: 160 mm - Workpiece thickness: 6-60 mm - Edge thickness: 0.4-6 mm - Feed speed: 10 m/min - Total length: 4930 mm - Weight: 1420 kg Availability: short-term Location: 63934 Röllbach

Condition: used, Edgebander Holz Her Model Triathlon 1486 V straightening glue application end trimming unit with 2 motors trimming unit corner rounding unit edge scraper corner rounding glue scraper brushes Klodpjy Ep U Eefx Afuju CE compliant

Condition: used, Year of construction: 2016, machine/vehicle number: 7405_408, functionality: fully functional, operating hours: 788 h, HOLZ-HER Evolution 7405 White Edition CNC Machining Center For sale is a very well-maintained HOLZ-HER Evolution 7405 White Edition, year of manufacture 2016. The machine is in excellent technical and visual condition and can be demonstrated under power. A particular highlight is the exceptionally low processing time: only 788 hours with active feed. The machine was professionally serviced and completely recalibrated by the manufacturer in 2021. Since then, it has seen only limited use and runs smoothly, precisely, and reliably. Technical Data Kodey Sicxopfx Afujlu Manufacturer: HOLZ-HER Model: Evolution 7405 White Edition Year of manufacture: 2016 Serial number: 7405_408 Software / Controls CAMPUS Version: 6.4.4.2 NC-Hops Version: 6.6.2.207 Operating Hours Active feed / Processing hours: only 788 h Machine ON: 6,723 h Features 4-MAT configuration Drilling unit with 15 spindles Saw and grooving unit Milling unit with 6-position tool changer Handheld control device Vertical and horizontal processing Vacuum clamping system Ideally suited for: Furniture production Interior fittings Kitchen construction Joineries CNC entry or capacity expansion Condition Very well-maintained overall condition Regularly serviced Professionally recalibrated by the manufacturer in 2021 Minimal use since recalibration Immediately ready for operation Runs very cleanly and precisely No known technical defects Machine can be inspected and tested during operation Availability Available from calendar week 25 / 2026 Inspection possible by appointment Support with loading and transport organization available Price Asking price: €43,900 net

Condition: used, Holz Her UNO 1303 + PU Edge thickness 0.4 - 3 mm (6 mm) Control panel with selector switches for adjusting the units Fully automatic edge magazine for roll and strip material Gluing station: cartridges + PU adhesive Workpiece height 6-55 mm Pressure unit, pneumatically controlled Cutting unit for roll and strip material up to 3 mm (6 mm) edge thickness with adjustment for 0-10° bevel of the cutting saw Milling unit, flush milling, radius milling, chamfer milling - 15° Scraping blade unit for chamfers and radii Surface scraping blade unit - finishing Klodpsy Tuylsfx Afueu Machine has been INSPECTED and is in TOP CONDITION, coming from a well-maintained workshop Machine is connected in the showroom and ready for demonstration available from warehouse in Lieboch

Condition: good (used), Year of construction: 1999, 0,4-5 mm Kjdpfxezafppo Afujlu Workingpiece thickness from to 6-45 mm Total length 4130 mm Feed speed 11 m/min. Weight 1250 kg

Condition: used, Year of construction: 2021, functionality: fully functional, For Sale: Premium Holz-Her 1329 Multi Edgebander + Return-Master 5920 We are selling a high-end Holz-Her 1329 Multi edgebanding machine, including the Return-Master 5920 return system. The unit is 4 years old and in excellent condition. Original New Price: €138,000 + VAT Our Price: €69,000 + VAT (50% savings) Why choose this machine? Get a premium, lightly used machine for the same price as a subsidized unit, but without the paperwork, bureaucracy, or long-term obligations of a grant application. Klsdpfx Aeygrghsfuju Maintenance: Regularly serviced by the expert Dimpex technical team. Performance: High-spec "Multi" version for versatile production needs. Serious inquiries only, please.

Year of construction: 1989, condition: good (used), - tilting spindle under the account - shaft diameter 50mm Ksdpfx Afjgxpileuslu - up and down adjustment - pneumatic adjustment of the spindle position - 400V power supply - THE FEED IS NOT THE SUBJECT OF THE OFFER

Condition: used, Year of construction: 2009, HOLZ-HER edge banding machine CONTRIGA 1366 Edge thickness: 0.4-30 mm (depending on equipment) Edge height: 51/66 mm (depending on equipment) Panel thickness: 6-45/60 mm (depending on equipment) Edge types: Rolls and strips Feed speeds: Continuous feed from 12-30 m/min (depending on equipment) With adjustable infeed level in the magazine area (max. adjustment range 30 mm) With height-adjustable magazine plate for changing the lower edge overhang With large magazine plate Ø 820 mm for edge rolls up to Ø 800 mm With transport chain including automatic central lubrication With motor-driven, position-controlled bridge height adjustment With pneumatic locking roller for the shortest workpiece sequence With extendable workpiece support (extension width 1600 mm) With space-saving, pneumatically controlled sliding hoods over the entire machine (Deviations for individual units are possible) with motorized infeed guide with injection oiler for lubricating all joints and bolts (including operating hours counter) with central connection for extraction (2x Ø 200 mm) with integrated chip collection box at the end of the machine (when radius scraper unit is installed) PPC 231 control system - Power PC for efficient setup and changeover - 15" SVGA screen with touchscreen - 128 MB CF memory card - USB connector on board - Ethernet network connection - Keyboard connector on board - Windows-like user interface - all information in plain text and/or graphics - Rotatable and pivoting control panel at eye level - Dust-proof membrane keyboard with softkeys (pushbuttons) - LED display for unit preselection - Program list with program names and numbers - Extensive program memory - Individual selection of the units with the functions as basic setting options for setpoints, route points and tool corrections as well as the fixed route points - Centralized and clear setup processes for units and their axis settings via fine adjustment (depending on the equipment) - Interval display for the shortest workpiece distance - Integrated path control - Path points are controlled generally or program-specifically - Clear and complete recording of all operating data - Service messages in plain text - Diagnostic system - including integrated synchronous bus system for high precision in unit control - Individual administration for up to ten users, including password protection - Online maintenance (optional), data exchange with HOLZ-HER Service - Barcode interface (optional) BASIC MACHINE CONTRIGA 1366 - Belt bridge Options and accessories for the basic machine Spraying device 1856 for the inlet and outlet area For the inlet area: Electronically controlled release agent sprayer with Riepe-LPZ/II release agent For the outlet area: Electronically controlled cleaning agent sprayer with Riepe-LP163/93 cleaning agent (only in conjunction with pre-milling unit 1961 and surface scraper 1964) Joint milling unit Joint milling station 1803 (2x 2.6 kW, 200 Hz, 12000 min-1) With two plunge-controlled milling units 1 unit in up-cutting direction 1 unit in down-cutting direction Plunge path 5 mm With static frequency converter 200 Hz Without milling tool With ProLock screw-in clamp for fast tool changes Tool for 1803 (workpiece height up to 60 mm) Diamond milling cutter PRO UT 2 pieces (front and rear) including protective covers Ø 100-63 - Ø 30 mm, Z = 3 + 3 + 3, 1x left-hand rotation, 1x right-hand rotation Noise-reduced milling cutter with integrated chip guide DFC technology (Leitz syst Klodpfxsvvkfde Afueu

Condition: used, Storage location: Nattheim Kljdpfjvvkrdex Afueu

Condition: used, Year of construction: 2009, Automatic central lubrication Milling unit 7833 2-stage, 11 kW power 1000 - 24000 rpm 1 double drilling spindle in X-direction 1 integrated sawing unit for sawing / grooving in X-direction, traveling Tool changer 7892, 16-way Linear Pick-up changer, permanently installed on the right-hand side of the machine Laser pointer consisting of 2 laser pointers for positioning the vacuum suction cups or tracing the workpiece contour Automatic console - suction cup positioning 6 consoles including 3 suction cup holders per console including 1 vacuum suction cup 80x80 mm per suction cup holder including 4 feeding aids Additional processing fields at the front for 6 consoles Basic unit pneumatics for frame clamping system 7974 (6 consoles) 2D barcode scanner Video camera in the processing head Vacuum pump 140 m³/h Vario tool Change changing unit package consisting of Consists of: Vector axis 7899 (C-axis), fully interpolating, 0-360° continuously rotatable, including pneumatic tool changer 7890, single-slot magazine pick-up system, permanently installed in front of the machine frame on the left. Tool changer 7894, 6-slot pick-up magazine specifically for Vario Tool Change tool holders, permanently installed in the machine frame on the left, can be equipped with a Vario Grip KSJ F 40 collet chuck, 3 Vario Grip KSJ F 40 tool holders (for 2-20 mm ER32 collets), 1 saw blade holder, 3 collets according to customer selection, 1 carbide circular saw blade, max. 220 mm diameter. Storage location: Nattheim Kljdpfevvi Spsx Afueu

Condition: good (used), Code: 0338 Brand: HOLZ HER Model: SPRINT 1310 - CE Standard Automatic edge bander with a cartridge-based adhesive system for wood edges, pvc, abs, veneer, suitable for furniture, panels, custom-made furnishings, kitchens, bathroom cabinets, carpentry shops, and various - CE Standard Features: Quick glue replacement: patented cartridge system that allows for quick and efficient switching between EVA and PUR glue during operation, or for changing glue colors - Simply replace the cartridge, no complicated cleaning of the glue tank is required - Ready for use in 3,5 minutes Technical data: Min/max panel height mm 6/45 Applicable edge thickness mm 0,4 - 6 Max gluing height mm 51 Min panel width mm 60 Min panel length mm 180 Kljdpfxeyvh Sye Afueu Feed speed mt/min 8 Composition: Gluing unit: Automatic feed for roll and strip edging - Patented Holz Her cartridge system - Roller press unit Tilting front and rear end trimming unit - Motors 0,22 Kw Multifunction unit with controlled axis for trimming and chamfering - N° 2 motors 0,6 Kw Edge scraper unit Glue scraper unit for removing any glue residue Brush unit for perfect cleaning Holz Her control system: Rotatable and tiltable control panel - All units can be activated individually - Unit functions with text display and graphical support - Display for unit preselection - Program list with program names and numbers - Self-diagnosis Soundproof booth Compressed air 6-7 atm Overall dimensions mm 4300 x 1200 x 1675 h Weight kg 1700

Condition: excellent (used), HOLZ-HER ProMaster 7125 machining center - used Console machine, additional connections for pneumatic clamps, pneumatic workpiece stops with double-acting cylinders, pneumatic feeding aids, hardened, dust-protected prism guides, helical toothed rack and pinion drive (X-axis), ball screw spindles on Y and Z axes, network card for remote maintenance, switch cabinet cooling with heat exchanger, handheld control unit, C-axis, A-axis, rotating disc tool changer, incl. safety fence, incl. anti-fatigue mats, pendulum operation possible, ceiling laser for positioning suction cups / workpiece, central lubrication, manual, incl. material removal simulation ----- Technical data ----- Machining length (contour milling - radius) X: max 3,605 mm, Machining length (contour milling - radius) Y: 1,335 mm, max. travel speed X: 100 m/min, max. travel speed Y: 100 m/min, max. travel speed Z: 25 m/min, max. workpiece length X: 200 mm, Machine control software: CAMPUS HOPS, Main spindle motor power: 9.5 kW (S6), Main spindle speed: 1,000 - 24,000 rpm, Main spindle arbor: HSK 63, Spindle cooling: coolant, Drilling unit motor power: 3 kW, Drilling spindle arbor: M10, Morse taper 11mm, Number of vertical drilling spindles: 10 pcs, No. of horizontal double drilling spindles in X-direction: 1 pc, No. of horizontal double drilling spindles in Y-direction: 1 pc, Number of consoles: 6 pcs, Number of tools in changer: 18 pcs, Vacuum pump capacity: 140 m³/h, Extraction connection Ø: 250 mm, required volume flow: 5,300 m³/h, required static vacuum: 2,500-3,000 Pa, Compressed air connection: 6 bar, Compressed air consumption: 300 l/min, Dimensions incl. fence (L x W x H): 6,712 x 4,585 x 2,760 mm, Weight: approx. 3,800 kg Kodpfxey Uxxnj Afuelu Quality information: - complete basic cleaning - electrical system checked - pneumatics checked - adjusted according to manufacturer's specifications - ready for immediate use