Used Honing Machine for sale (65,067)

Condition: used, Year of construction: 1983, workpiece diameter 250 mm centre distance 0 mm honing length max. mm max. module 5 Gear Ø, min./max. 10 / 250 mm Module range 1 - 5 Length of teeth / max. table stroke 500 mm Height of centres of tailstocks 220 mm Max. weight of workpiece 50 / 100 kg Honing head swivelling +/- 35 ° Speeds of honing tool 20 - 500 rpm Size of honing tool, Ø x width 300 x 40 mm Workpiece speeds 500 - 3,000 rpm Total adjustment of cross slide 270 mm Rapid traverse of cross slide 50 mm Infeed travel of cross slide, mechanical 1 - 8 mm/Ø Roughing / finishing infeed 1 - 29 / 0.2 - 2.8 mm/sec Table speeds, hydraulic 0 - 6 m/min Total electrical load 5.5 kW - 380 V - 50 Hz Kedpfx Ajt Hwzpobceww Weight 3,200 kg Accessories / Special Features * Working parameters can be preset using counters and control units. Automatic working process with workpiece counter. * All roughing and finishing infeeds can be adjusted by a decade switch; as well as by table reverse times and fast infeeds with preset times (1sec = Ø 0.04 mm), set on a potentiometer. Ampere display, etc. * Convex honing and conical honing are possible via templates. Asymmetric honing is also possible if the workpiece is prepared appropriately (i.e. pre-shaped). * Separate honing oil unit with magnetic separator and fine filter. * Mechanical tailstocks for manual loading. * Oil mist separator. * Sliding doors with foot switch. * Separate hydraulic unit. Condition : Good. Machine can be inspected under power. Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract. We have a large selection of gear machines available. Please let us know your requirements.

Condition: used, honing diameter 165 mm stroke 120 mm centre height 100 mm total power requirement 1,5 kW weight of the machine ca. 1 t We are pleased to offer you ex our stock, subject to prior sale, and error in technical data : SUNNEN (USA) Horizontal Automatic Honing Machine model MBC 1804 G year Serial no 1K1-190075 _____ Ksdpfx Asw U U Iqobcsww Honing range – Ø with gauge control 1,5 – 51 mm with automatic stroke 1,5 – 95 mm with manual stroke 1,5 – 165 mm Workpiece honing length max. approx. 400 mm Workpiece honing lengthe with gauge control 254 mm 12 spindle speeds 200 – 2.500 rpm 5 stroke rates 80 – 310 stroke/min Length range of automatic stroke 6 – 120 mm Power of spindle 0,75 kW - 380 V - 50 Hz Total drive appro. 1,5 kW - 380 V - 50 Hz Accessories / Special Features • Automatic Working Cycle with aut. mechanical stroke, aut. hydr.-mechanic Honingtool-feed and aut. cycle stop when the nominal size is reached • Elektro-mechanical gauge control with a probe in the nominal diameter-size mounted opposite to the main spindle, which initiates the cycle stop when the nominal diameter is reached. • Steplessly adjustable honing tool pressure feed • Footswitch for manual operating • Built-in honing oil supply system • Manuals. Unfortunately there is no tooling with the machine Condition : very good, universal machine for all sorts of honing tasks ! Soon : Please click here to view a video of the machine running : ! Delivery : immediately available, FCA Metzingen Payment : 100 % Net, after conclusion of contract, before loading

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: G0504, workpiece diameter (max.): 63 mm, travel distance Z-axis: 105 mm, outer diameter: 275 mm, distance between centers: 350 mm, swivel angle A-axis (min.): -30 °, swivel angle A-axis (max.): 30 °, TECHNICAL DETAILS Workpiece diameter: 63.5 mm Center distance: 350 mm Kwedpowmbmlsfx Abcew Clamping surface length: 1,550 mm Number of T-slots: 2 T-slot width: 18 mm T-slot spacing: 180 mm Center height (tailstocks): 350 mm Pivoting range of the fine-tuning head (U-axis): +30 / -30 ° Tailstock/fine-tuning head center distance: min. 120 mm / max. 225 mm Input resolution (all NC axes): 0.001 mm / degree Control: SIEMENS 840D Feed slide Movement range (Z-axis travel): 105 mm Input resolution: 0.001 mm Tool Outer diameter: 225 - 275 mm Bore diameter: 160 mm Width: 60 mm Workpiece details Outer diameter: 40 - 150 mm Module: 1.25 - 4.0 mm Max. tooth width: 45 mm Speeds and feed rates Tool speed: max. 2,000 rpm Feed rate in Z direction: up to 2 m/min Feed rate in X direction: up to 2 m/min Feed rate in U direction: up to 2 m/min Feed rate in V direction: up to 2 m/min C3 direction: max. 12 °/s Servo drives Tool drive C1: 27.0 Nm at 3,000 rpm Workpiece drive C2: 27.0 Nm at 3,000 rpm X-axis: 20.0 Nm at 3,000 rpm Z-axis: 20.0 Nm at 3,000 rpm U-axis: 6.0 Nm at 3,000 rpm Vertical gantry (V1 axis): 6.0 Nm at 3,000 rpm Gripper rotation axis C3: 5.0 Nm at 3,000 rpm Loading slide (X1 axis): 5.0 Nm at 3,000 rpm Three-phase motors Hydraulic motor: 1.5 kW at 1,410 rpm Central lubrication: 0.07 kW at 2,700 rpm Coolant pump: 4 kW at 2,840 rpm Hydraulic equipment Flow rate: 21 l/min System pressure: 50 bar Headstock clamping pressure: max. 35 bar Tailstock clamping pressure: min. 20 bar / max. 35 bar MACHINE DETAILS Weight: 5,500 kg Space required: 2,700 x 2,300 x 2,600 mm Operating fluids Hydraulic fluid: HLP D 46 Hydraulic capacity: 100 l Electrical system Operating voltage: 400 V Control voltage: 24 V DC Lighting voltage: 230 V AC Frequency: 50 Hz Power requirement: approx. 27 kVA EQUIPMENT - Central lubrication system - Coolant pump - Capacitive distance system - Automatic workpiece clamping - Precision wheel head with U-axis - Machine with full hydraulic equipment - Dialog-guided operator terminal

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 203214, workpiece weight (max.): 2 kg, spindle speed (max.): 3,700 rpm, workpiece diameter (max.): 150 mm, empty load weight: 1,579 kg, TECHNICAL DETAILS Workpiece diameter: 8 to 150 mm Max. workpiece weight: 2 kg Spindle speed range: 250 to 3,700 rpm Standard speed range: 20 to 1,000 rpm Stroke speed range: 33 to 500 strokes/min Ksdpexxkfxefx Abcsww Tools Krossgrinding tools: 5.46 to 32 mm TurboHone tools: 3.81 to 32 mm Connecting rod tools: 53.8 to 63.8 mm Larger tools: 25.4 to 101.6 mm MACHINE DETAILS Coolant system Pump motor power: 0.18 kW Coolant pump: 5.6 l/min Coolant capacity: 132 l Air pressure requirements: 566 l/min at 4.48 bar Recommended air pressure: 5.52 bar Temperature range: 0 to 35 °C Noise emissions: < 71 dB (A) continuous, < 75 dB (A) peak Dimensions & Weight Dimensions (L x W x H): 2,946 x 2,971 x 1,829 mm Net weight: 1,579 kg Required footprint thickness: Minimum 150 mm EQUIPMENT Automatic setup (spindle speed, stroke speed, stroke length, feed rate, spark-out) Automatic finish machining Machine operating modes: Automatic, Manual Series production Single-item production Optional clamping

Condition: excellent (used), Various new honing stones, horns, guide shoes and accessories Sunnen. Used honing stones Sunnen, PG800-EM Kwodpoigvrajfx Abcsw

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, spindle speed (min.): 250 rpm, spindle speed (max.): 2,500 rpm, total height: 1,600 mm, total width: 1,200 mm, total length: 1,450 mm, lifting speed: 130 mm/s, hone diameter: 50 mm, overall weight: 830 kg, stroke length: 160 mm, power: 0.75 kW (1.02 HP), This easy-to-use manual honing machine is characterized by high stability and precision, and can be adjusted via stepless electronic speed control. The honing diameter ranges from 3mm to 50mm, with lengths up to 160mm. Easy to operate and simple to adjust. Due to its compact footprint, it is highly flexible in terms of placement. Kwsdsw Upzxepfx Abcow

Condition: used, honing diameter 99999 mm stroke 99999 mm Kodpfsv Twgiex Abcsww throat 99999 mm Used panel of a NAGEL MSU2 No warranty

Condition: used, Year of construction: 2000, honing diameter 45 mm stroke 1000 mm 4 spindle honing machine for guns Honing area according to the manufacturer: Diameter 5-45mm Maximum Honing Length 750mm Accessories: Honing tools for diameter: Ksdpfxoxddq Eo Abceww -10mm -12,3mm -13,3mm -21,1mm

Condition: used, honing diameter 99999 mm stroke 99999 mm throat 99999 mm Kwodjv Tqqhopfx Abcow Used Treiber from a Nagel MSU2 control No warranty

Condition: used, honing diameter 99999 mm stroke 99999 mm throat 99999 mm Used without warranty Kwjdpfx Aov Tqqusbcow

Condition: used, Year of construction: 2010, honing diameter 54 mm stroke 99999 mm centre height 9999 mm Kwodovk Nkuopfx Abcew Control FANUC CNC Ball and spherical honing machine

Condition: used, Year of construction: 1975, honing diameter 250 mm stroke 99999 mm throat 99999 mm Seems to be manzfactured by NAGEL Hondurchmesser app YOM app because of no plate Kwjdpfx Aewlvkpsbcsw

Condition: used, machine/vehicle number: 3254, used honing machine make NAGEL type VS 8 - 35 max. stroke = 350 mm Kwjdpfx Abjkt Nnvjcow throat = 250 mm Distance table - spindle = 800 mm Bore diameter = 24 - 150 mm

Year of construction: 1981, condition: good (used), Manufacturer: National Broach Type: GHC 12" Kodpfohad Avjx Abceww Year of manufacture: 1981 workpieceØ max.: 355mm pitch circleØ min/max: 100-152mm tooth width max.: 63,5mm Modu min/max.: 1,25-6,35mm weight: 3,4t Operation: honing internal teeth

Condition: used, TECHNICAL DETAILS - Honing range : Ø 0,6 – 2,5 [mm] - Spindle speed : 2000 – 7000 [RPM] - Motor power : 100 [kw] Kwjdjug U D Hjpfx Abcsw - Table dimensions : 100 x 100 [mm] - Honing oil container with pump : 12 [l] - Weight : 160 [kg] - Dimensions : 650 x 500 x 700 [mm] EQUIPMENT - Plate 2 positions - Fittings with floating frame

Condition: used, Honing machine DELAPENA SPEEDHONE EA Kedpfx Aev R Hv Usbcjww

Condition: used, Honing machine SUNNEN EC-35000CEM-26 Kedpfx Aboxbtykscsww

Condition: used, TECHNICAL DETAILS - Spindle number : 1 - Honing range : Ø 1,5 - 50 [mm] Ksdsug U Dyopfx Abcoww - Honing stroke : 0 - 100 [mm] - Spindle speed : 150 - 2500 [Rpm] - Dimensions : 1550 x 800 x 1450 [mm]

Condition: used, TECHNICAL DETAILS - Plate diameter : 348 [mm] - Part dimensions (rings) : approx. 70 [mm] - Part dimensions (full) : approx. 40 [mm] - Remaining work thickness : approx. 5 [mm] Kodeug U Dmspfx Abcoww EQUIPMENT - Same as on photos

Condition: used, TECHNICAL DETAILS - Capacity - Diameter : 80 [mm] Kjdpfx Abovxlipocoww - Speed : 1000 [rpm] - Machine floor space : 120 x 100 x 150 [mm] - Machine weight : 229 [kg]

Condition: used, TECHNICAL DETAILS - honing diameter : 1 - 12 [mm] - honing length : 40 [mm] - 2 honing heads - 1 control head - 1 deburring unit with multispindle head Kjdpsug U Dtjfx Abcoww

Condition: used, Honing machine SUNNEN MBC1804 Kwedpfx Aboxbtywecow

Condition: used, Honing machine SUNNEN MBC1804 Kwjdoxbtyqspfx Abcew

Condition: used, TECHNICAL DETAILS - Plate - External diameter : 750 [mm] - Internal diameter : 150 - Main motor rotation speed : 4 [kW] - Supply voltage : 380 [V] - Total installed power : 3.6 [kW] Kjdpfxsxb Em Ns Abcjww WEIGHT & DIMENSIONS - Machine floor space : 1100 x 1700 [mm] - Machine height : 2000 [mm] - Machine weight : 1100 [kg] - Number of hours : 5160 [h]

Condition: used, TECHNICAL DETAILS - Capacity - Diameter : 80 [mm] - Speed : 1000 [rpm] - Machine floor space : 120 x 120 x 150 [mm] - Machine weight : 283 [kg] Kwjdpfx Ajvxlivsbcow