Used Hinge Boring Machine for sale (65,751)

Condition: ready for operation (used), Year of construction: 1993, mobile, drilling from the front, 1 core drill D=34 mm, 2650 mm long, approx. 1200 mm deep, operating manual Gkodpfx Ajx Ez Nksp Djc

Condition: good (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 16201201, drilling depth: 70 mm, type of input current: three-phase, compressed air connection: 8 bar, input voltage: 400 V, workpiece height (max.): 65 mm, number of spindles: 21, operating pressure: 8 bar, input frequency: 50 Hz, workpiece length (max.): 850 mm, workpiece width (max.): 3,000 mm, For sale is a used Felder FD 921 dowel drilling machine from 2015. This machine is ideally suited for precise dowel joints and series hole drilling in the furniture, interior design, and carpentry sectors. Thanks to its robust design and proven Felder quality, it is ideal for professional use. Further technical data: Drilling unit with 21 spindles Motor power: 1.5 kW Rated current: 3.8 A Working pressure: 6 - 8 bar Multi-spindle dowel drilling machine for efficient series and dowel drilling Precise workpiece stops and easy operation Number of drilling heads: 21 (11 right-rotating, 10 left-rotating) Axial distance between the drilling heads: 32 mm Max. workpiece size: 850x3000 mm The machine is in used, fully functional condition and shows the usual signs of wear of a workshop machine. It is ideally suited for carpentry shops, joineries, and professional furniture and interior design. Inspection and test run possible by appointment. Gkjdsz Rvd Nopfx Ap Dec

Condition: used, Year of construction: 1990, functionality: fully functional, machine/vehicle number: 254002, type of input current: three-phase, overall weight: 130 kg, input voltage: 380 V, number of spindles: 8, input frequency: 50 Hz, Schleicher frame dowel hole drilling machine DBH 600, Drilling motor 1.5 kW, 380 Volt, 50 Hz, Drilling stroke 0 - 130 mm, Special drilling gear with 3 rows and 8 spindles, 1 clamping cylinder, Gjdpfx Apjz Nkuts Dekc Special stop system for window frames and window mullions Weight approximately 130 kg as is, at the Seevetal location, excluding transport, EXW (Ex Works), subject to prior sale.

Condition: excellent (used), Year of construction: 1990, functionality: fully functional, Dowel and long-hole drilling machine GANNER JUNIOR 320 LBM in very good condition, like new, the machine comes from a small carpentry shop and was used very little there it can be used to mill long holes and drill dowel holes in 2 levels without reclamping 380V, 1500W Speed: 2800 rpm Year of construction: 1990 with this machine, you can mill long holes for, for example, lock housings and similar items, or create all types of frame dowel joints at right angles, flush, and mitered ideal for the production of dowel joints in timber frame construction, furniture, door, window, and stair construction, and for similar applications Gkjdpfxjz I Eggj Ap Doc drilling on 2 levels, the grid and stops, and the design of the machine allow dowel joints to be produced in a very short time, which makes the machine very economical the machine requires a compressed air connection of 6 bar (air consumption is very low) Right-hand rotation mills and drills very well and cleanly with 2 angle stops (one center stop and one side stop, which can be used on both sides) 2 stop rails can be attached on the left and right, the stop rails are 1000 mm long, each with 2 folding stops the workpiece is clamped using 2 pneumatic clamping cylinders the height adjustment from one drilling level to the other is also pneumatic; the pneumatic switch for this is located at the front of the machine, which ensures fast adjustment of grids and drilling levels with a precision 12mm grid rail, which has a center grid and 12 grids on the left and right can be quickly converted for long-hole milling; the machine can then be used without a grid with 2 adjustable stops on the left and right, and then has a working width of max. 420mm the max. borehole height is 100mm the max. borehole depth is 150mm with stop and scale the max. workpiece height is 160mm everything works perfectly we will personally deliver and demonstrate the machine anywhere in Germany for 220.00 euros, so you have no risk when purchasing; delivery to Austria and the EU is also possible on request the machine table is 870mm wide, 140mm deep on the sides, and 350mm deep in the middle professional equipment, not cheap hardware store junk you can start working with the machine immediately with 2 chucks up to 20mm very stable and durable construction the precision guides with the backlash-free ball bearing bushings are in good condition and move smoothly

Condition: used, Year of construction: 1995, Hole row and fitting drilling machine Year of manufacture: 1995 Single-row hole row and fitting drilling machine Hinge plates and fittings can be processed without major retooling Workpiece width max. 600 mm Drilling bar with 15 spindles, spacing 32 mm Gkodpfx Asz H Dwnep Doc Indexing system, manual, with stop guides Drilling length max. 480 mm Motor 2.2 kW - 2800 rpm Drill chuck 10 mm with clamping surface Operating pressure 6 bar Weight: approx. 220 kg Availability: short-term Location: Flörsheim

Condition: repair required (used), functionality: not functional, Drilling machines for turned parts – TRIADE FIR-6 Gksdpfx Aezmxf Ajp Djc Defective – PLC controller missing.

Condition: good (used), Year of construction: 2014, Knuth Sinus 330 x 1500 Knuth Sinus 330 x 1500 lathe, manufactured in 2014, in very good original condition. The machine comes from a special production run by a renowned German machine tool company. CE compliant!! Technical data: Year of manufacture: 2014 Knuth Sinus 330 x 1500 Working area: Workpiece length: 1,500 mm Turning diameter over bed: 660 mm Turning diameter over cross slide: 440 mm Turning diameter without bridge: 900 mm Bridge length: 320 mm Bed width: 400 mm Travel distances: Travel X-axis: 368 mm Gksdpfxez Irwfs Ap Dsc Travel Z1-axis: 230 mm Swivel range of top slide: 45° Main spindle: Spindle speed: 25 rpm - 1,600 rpm Spindle bore: 105 mm Spindle mounting: D1-8 Spindle taper: ø 113 mm / 1:20 Rapid traverse: Rapid traverse X-axis: 2,000 mm/min Rapid traverse Z-axis: 4,000 mm/min Tailstock: Tailstock spindle diameter: 90 mm Tailstock taper: 5 MK Tailstock quill stroke: 235 mm Tailstock cross slide: ± 12.5 mm Drive power: Motor power, main drive: 7.5 kW Dimensions and weights: Dimensions (L x W x H): 3.21 m x 1.23 m x 1.6 m Weight: 2,800 kg About the machine: The Sinus D is the largest series in the universal lathe segment. Conventional lathes like this are characterized by their robust design and high versatility. The design follows a classic design, but is based on a heavy, one-piece cast machine bed. As with heavy-duty lathes, the power transmission between motor and spindle is also achieved here via a manual lamellar clutch. With integrated functions such as the removable bed bridge, rapid traverse, and a taper turning device, this series offers optional solutions for machining long workpieces or large flanges. One-piece heavy cast bed with high stability Massive headstock with large spindle bearings Rapid traverse in 2 axes for fast positioning Taper turning attachment for additional applications Well-designed safety features You can find more lathes from well-known manufacturers on our website.

Condition: not inspected (used), Year of construction: 2013, Bore diameter , mm Number of heads horizontal , St. Number of heads vertical , St. Götzinger Drilling and Milling Centre ----- For sale on behalf of a client! Machine for ‘left-hand’ and ‘right-hand’ parts. The machine was controlled via window-making software, but can also be operated via the machine’s own software. The machine is equipped as follows: - Drilling units on the left and right for end-face drilling. - 3 units for drilling and milling for longitudinal machining. - Parts are loaded once and the unit carrier then moves to perform the various machining operations. Machine installation length approx. 6 m. Gkedpfx Aev N N Spop Djc For further information, see the attached PDFs.

Condition: ready for operation (used), Kölsch / Beichle Uni1-Uni4 / Universal milling machine - Universal rotary table - Coordinated milling paths X / Y / Z Gjdpfx Ajz Eyyijp Dekc - Suitable for general milling operations and partial and full circular milling - Additional three-jaw chuck Dimensions: L x W x H 1.7 x 1 x 1.9 meters / Weight 950 kg Errors and omissions excepted.

Condition: good (used), Year of construction: 1998, Ganner Universal Dowel Drilling Machine Universal dowel drilling machine for: Drilling carcass frames, hardware, and row of holes Drilling beam with 21 spindles Gsdpsz Dt Hysfx Ap Djkc Pitch 32 mm Guide rails for drilling rows of holes Angle stops Additional accessories Pneumatic pivoting of the drilling beam Working width 640 mm Portal passage approx. 750 mm Drilling stroke approx. 100 mm Position adjustment of the drilling unit 0-45 mm Position adjustment of the row of holes approx. 300 mm Motor 1.5 kW Technical data available upon request The data has been taken from a brochure, therefore no guarantee is given.

Condition: new, functionality: fully functional, Year of construction: 2026, CORMAK BBM40PNEU Hinge Boring Machine – Precision Machining for Furniture Fittings The CORMAK BBM40PNEU hinge boring machine is a compact, efficient, and easy-to-use woodworking drill designed for precise drilling of holes for furniture hinges. The machine performs exceptionally well in furniture production, offering repeatable drilling accuracy and stable tool guidance. Thanks to its intuitive design and robust components, the BBM40PNEU ensures high-quality work while remaining simple to operate. Key Advantages Pneumatic system – Pneumatic spindle lowering provides convenient and precise positioning as well as drilling repeatability, significantly improving efficiency and the quality of hinge installation. Pneumatic quick-connect system – Allows easy disconnection of the machine from a stationary compressed-air source, and together with its compact design, enables use as a hand-held drill directly on assembly sites. Precise drilling for furniture hinges – An adjustable depth stop located at the rear of the machine allows full control over drilling parameters, minimizing the risk of material damage. Compact and stable construction – A rigid base with a large worktable (350 × 300 mm) ensures comfort and safety during operation. High-power 1.1 kW motor – A uniquely powerful motor compared to competitive machines, providing sufficient torque for working with Blum-type hinges and other fittings systems. Three working spindles – Allow simultaneous drilling of the main hinge hole and the side pilot holes. Applications The CORMAK BBM40MAN hinge boring machine is used in: production of kitchen, bathroom, and office furniture, carpentry workshops and maintenance departments, service companies specializing in hardware installation, schools and training centers related to woodworking. Standard Equipment 3-spindle hinge boring head, pneumatic fence feed (110 mm), adjustable depth stop, 300 × 260 mm worktable, powerful 1.1 kW motor (230 V), 35 mm cutter + two 2 mm drill bits for BLUM hinges. Technical Specifications Specification Value Table dimensions 300 × 260 mm Fence feed 110 mm Distance between spindle and table 130 mm Tool shank diameter 10 mm Number of spindles 3 Speed 2800 rpm Workpiece clamping manual Gkjdpfx Aoxzdhrjp Dec Control pneumatic Motor 1.1 kW Power supply 230 V Overall dimensions 350 × 500 × 550 mm Weight 20 kg

Condition: good (used), Code: 0028 Gsdpez N A T Iefx Ap Djkc Brand: OMG Model: EPM/70 Automatic slotting machine for blinds Technical data Spindle connection mm 10 Drill speed 12000 rpm Simultaneous machining of 2 sections 18 possible pitches with a single toothed rod Slots depth up to 25 mm Drill motor Hp 1,5 Slide motor Hp 1 Up to 20 slots / minute Inclination from from 90 degrees (vertical) to 0 degrees (horizontal) Max section dimensions mm 100 x 120 Automatic stop Overall dimensions: machine mm 1500 x 1000 x 1200 h - kg 490 - Rack mm 3200 x 100 x 200 h - kg 30

Condition: like new (used), Year of construction: 2017, functionality: fully functional, travel distance X-axis: 18,000 mm, travel distance Y-axis: 5,000 mm, travel distance Z-axis: 1,750 mm, mount diameter: 220 mm, spindle speed (max.): 3,600 rpm, rotational speed (max.): 1,800 rpm, table load: 75,000 kg, coolant supply: 70 bar, spindle motor power: 1,000 W, workpiece weight (max.): 75,000 kg, feed length W-axis: 1,400 mm, MOBILE COLUMN BORING MACHINE WITH DOUBLE TABLE FPT INDUSTRIE SPIRIT 450 Technical specifications Type: Mobile column boring machine with double table Brand and model: FPT Spirit 450 CNC: Siemens Sinumerik 840D Installation: 2017 Technical data Axis travels: X: 18,000 mm Y: 5,000 mm Z: 1,750 mm W: 1,400 mm B: 360° V: 3,000 mm U: 400 mm Maximum workpiece dimensions: Dimensions of each table: 4,000 x 3,000 mm Maximum machinable height: 5,000 mm Maximum load capacity: 75 tons Positioning accuracy: 0.05 mm Spindle speed: Up to 3,600 rpm with TUPC-M head Normal speed: 1,800 rpm Spindle power: 100 kW Tool types: ISO 60 C.F. ISO 50 ISO 50 C.F. CAPTO C8 Boring bar diameter: Ø220 mm RAM: 650 x 560 mm Accessories and automation 2 rotary-movable tables with dimensions 4,000 x 3,000 mm each. Automatic tool changer for ISO 60 and ISO 50, via a storage and management system with a KUKA anthropomorphic robot. Manual tool changer for CAPTO C8 for the D’Andrea UT5 head. Measuring probe installed on the machine: SONDA PROBE RPM600 (RENISHAW). Coolant and lubrication system Internal and external cooling via cutting fluid: Internal cooling of the boring bar tool: Pressure: 70 bar Flow rate: 80 l/min Internal cooling of the head tools: Pressure: 40 bar Flow rate: 28 l/min External cooling of the tool: Pressure: 4 bar Flow rate: 28 l/min Internal and external air system for cooling the tool when cutting fluid cannot be used. Heads and accessories TU144: Universal roughing head ISO 50, with angular indexing every 2.5°. Maximum spindle speed: 1,800 rpm. TUPC: Universal finishing head ISO 50, with precise angular indexing. Maximum spindle speed: 1,800 rpm. TUPC-M: Universal multiplied finishing head ISO 50, with precise angular indexing. Maximum spindle speed: 3,600 rpm. D’Andrea UT5 head: Head for turning with CAPTO C8 tools. Maximum spindle speed: 251 rpm. ISO 60 spindle: Main spindle. Maximum speed: 1,800 rpm. ISO 50 reduction for finishing: Maximum speed: 1,800 rpm. ISO 50 reduction for roughing: Maximum speed: 1,800 rpm. Long ISO 50 reduction: Maximum speed: 1,800 rpm. Gkodpfx Asz Hl A Esp Dec PRICE AND FURTHER INFORMATION AVAILABLE UPON REQUEST (CNC, SIEMENS, HASS, LAGUN, FAGOR, CINCINNATI, HEIDENHAIN, MACHINING, PINACHO, MORISEIKI, MILLING MACHINE, LATHE, GRINDER, BORING MACHINE, PRESS, LASER, SHEARING MACHINE, FOLDING MACHINE)

Condition: excellent (used), Year of construction: 1981, functionality: fully functional, machine/vehicle number: 2172, travel distance X-axis: 1,000 mm, travel distance Y-axis: 630 mm, feed rate X-axis: 400 m/min, feed rate Y-axis: 400 m/min, feed rate Z-axis: 300 m/min, table length: 1,120 mm, table width: 630 mm, total length: 2,760 mm, table height: 2,800 mm, total width: 3,306 mm, rapid traverse X-axis: 1 m/min, rapid traverse Y-axis: 1 m/min, rapid traverse Z-axis: 1 m/min, drilling capacity: 30 mm, Dimensions of the working surfaces: - Maximum stroke of spindle - min.270mm - Spindle extension - 710mm - Distance from spindle end to working table - least 200mm greatest 750mm - Internal spindle cone acc.to GOST 15945-70 - metric 45 - Machine weight (without electrical equipment and accerssories) - 6890kg Table and skids: - Nr.of table slots - 7 - Securing the table and sleds - mechanical - Screen counting method - optic - Screen resolution value- 0,001mm Spindle: - Boring capacity: 250mm - The accuracy of processing a given size at a feed rate no more than 150mm/min - 0,2mm - Force allowed by the feed mechanism - 600kgs - Spindle RPM limits (within two gears): 1st gear- 32-400 RPM, 2nd gear - 160-2000 RPM - Maximum vertical mechanical displacement - 330mm Gkedpfx Asunrhaop Djc Extras: coilets, tool holders, other additional equipment, documentation for machine

Condition: good (used), Year of construction: 1973, Ref. -No.: 10658 Manufacturer: SCHARMANN Type: Opticut FB 140 Year of construction: 1973 Type of control: CNC Control: Heidenhain Storage location: Halberstadt Country of origin: Germany Machine-No.: 162XXX X-Travel: 2000 mm Y-Travel: 2000 mm Z-Travel: 1500 mm Spindle Diameter: 140 mm Spindle Taper: ISO 50 Gkodpfx Apjzp Dn Is Dsc Table Dimensions (Lengthxwidth): 1800 x 1500 mm Table Load: 15000 kg Turning Speeds: 2,3 - 810 RPM Spindle stroke: max.800 mm Total Power Requirement: 30 kW Machine length: 7300 mm Machine width: 5600 mm Machine Height: 4000 mm Weight Of The Machine Ca.: 31 t Further information: - Faceplate with NC face slider and NC rotary table - Heidenhain digital readout - Various tool holders - Various clamping devices The machine can be viewed while powered on by prior arrangement.

Condition: used, Year of construction: 1998, Number of spindles in the hole row: 11 Number of horizontal spindles: 3 Pot-band drilling head: yes, Hettich Drill spacing: 32mm Gkodpfx Apsz I Ivde Djc Power consumption: 2.2kW Drilling unit: swiveling

Condition: like new (used), Year of construction: 2018, machine/vehicle number: DC-2075, Work table 700 x 300 mm, Gkjdsvl Eynspfx Ap Doc Drilling width 240 mm, Drilling depth 150 mm, Max. travel 230 mm, Drill head height adjustment 160 mm, Drill head swivel 45°-0°-45°, Wescott drill chuck 0 - 20 mm, Speed 3,000 rpm, Motor 2.2 kW, 400 volts, 50 Hz, Weight approx. 345 kg, Ex works, from the Seevetal location, excluding transport, as inspected, subject to prior sale.

Condition: used, Drilling / Jig Boring Machine CONSTANT SUPEMEC type P65 Travel X: 500 mm Travel Y: 300 mm Travel Z: 550 mm Cone: SA40 Spindle speed: from 77 to 1520 RPM Table size: Length 1200 mm x Width 420 mm Maxi distance spindle nose/table: 670 mm Mini distance spindle nose/table: 120 mm Throat depth: 300 mm Variable speed drive for X - Y Voltage: 380 V Width: 1600 mm Depth: 1800 mm Height: 2400 mm Gksdpsz Nwcdofx Ap Doc Total width with control panel: 2700 mm Weight: 3 T

Condition: good (used), Year of construction: 1979, functionality: fully functional, We are offering this used Schneider SL 1 long-hole drilling machine, model SL 1 7429, manufactured in 1979, for sale. Manufacturer: Schneider Gkjdpfx Asz Afd Djp Doc Model: SL 1 Machine No.: 7429 Year of Manufacture: 11/79 The advertised price is €1,400 net (negotiable). If you have any questions or require further information, please feel free to send us a message or call us.

Condition: used, Year of construction: 1988, machine/vehicle number: 13.088.094, travel distance X-axis: 420 mm, travel distance Y-axis: 240 mm, travel distance Z-axis: 120 mm, spindle speed (max.): 9,000 rpm, controller model: HEIDENHAIN TNC 155, drilling depth: 120 mm, No minimum price – guaranteed sale to the highest bidder! Gsdez Ilu Repfx Ap Dskc Submitting a bid obligates you to collect the item on time between November 16, 2026, and November 26, 2026! TECHNICAL DETAILS Travel range, X-axis: 420 mm Travel range, Y-axis: 240 mm Travel range, Z-axis: 120 mm Travel range, A-axis: ± 30,000 ° Table clamping surface: 780 × 230 mm Drill head adjustment range: 450 mm Spindle speed: 50–9,000 rpm Spindle motor drive power: 3.7 kW Drilling capacity in steel: 20 mm Drilling depth: up to 120 mm Rapid traverse, X-axis: 7 m/min Feed rate, X-axis: 7,000 mm/min Rapid traverse, Y-axis: 7 m/min Feed rate, Y-axis: 1–7,000 mm/min Feed rate, Z-axis: 0.02–0.30 mm/rev Rapid traverse, A-axis: 10,800 °/min Feed rate, A-axis: 1–10,800 °/min MACHINE DETAILS Control system: HEIDENHAIN TNC 155 Operating voltage: 380 V Frequency: 50 Hz Dimensions & Weight Dimensions (L x W x H): 2,200 x 2,000 x 2,400 mm Weight: 2,000 kg EQUIPMENT Built-in workshop drawer cabinet Hand tools Milling cutters Matching tool holders Collets External Reference: C.O. - Lot 23

Condition: used, Year of construction: 2024, Slot drilling machine with rotating table • Drilling unit rotatable • 2 eccentric clamps • Height display • Mechanical dowel boring device (16-22-25-32 mm hole spacing) • 2 speeds: 1440 / 2880 rpm • Motor power 1.5 kW 1.1 Working table mm 800x400 1.2 Motor kW 1.5 1.3 Spindle speed rpm 2880 1.4 Max. slot height above table mm 160 1.5 Max. longitudinal traverse mm 345 1.6 Max. lateral traverse mm 245 1.7 Spindle stroke mm 160 1.8 Tool clamping diameter mm 0-20 1.9 Max. tool length mm 175 1.10 Number of eccentric clamps 1 1.11 Longitudinal tilt table angle ° 1.12 Spindle rotation ° 1.13 Table rotation ° +/- 45° 1.14 Machine dimensions mm 1500x1100x950 1.15 Machine weight kg 345 P 41 55 Extraction connection 1 P 41 25 2nd eccentric clamp 1 P 41 20 Mechanical dowel boring device 1 P41 07 2-speed motor 1.5/1.9kW 1440/2880 rpm P41 34 Mechanical numeric spindle height measurement Location: Gjdpfxswd U U Do Ap Dekc

Condition: excellent (used), Year of construction: 1991, functionality: fully functional, machine/vehicle number: 1028 161, drilling depth: 75 mm, total width: 900 mm, total length: 1,200 mm, overall weight: 430 kg, spindle speed (max.): 2,800 rpm, drill spindle length: 800 mm, workpiece height (max.): 80 mm, number of spindles: 23, operating pressure: 6 bar, GANNOMAT COMBI 110 Dowel and multi-hole drilling machine including stops Gkedszvm Hajpfx Ap Dsc READY FOR USE

Condition: excellent (used), Year of construction: 1978, functionality: fully functional, I am selling this machine. A video of the machine can be sent via WhatsApp. It can be tested while connected. Very good condition. X 11,500, Y 3,150, Z 2,000, clamping M 100 Includes a support column, 6 pieces of boards with dimensions 6,500 x 1,850 x 400 mm. Rotary table E 20. Heads, etc. This is a complete workstation. Gksdpfexwl Tbex Ap Doc Weight approximately 200,000 kg.

Condition: excellent (used), IM Very good condition. Gkodpfx Apoytc Nas Djc

Condition: excellent (used), functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 700 mm, spindle speed (max.): 2,000 rpm, table length: 1,100 mm, table width: 842 mm, X axis: mm 1.000 Y axis: mm 700 Spindle travel: mm 300 Table dimensions: mm 1.100 x 842 Spindle speed: rpm 40 – 2.000 Spindle cone: MT 4 Max power: kW 10 Max loading on table: ton 1 Machine weight: ton 15 Gkedpfx Aozizgbop Dsc EQUIPPED WITH A LOT OF ACCESSORIES