Used Horizontal Baler for sale (6,158)

Condition: reconditioned (used), Year of construction: 2002, operating hours: 44,590 h, functionality: fully functional, pressing force: 200 t, filling opening width: 1,020 mm, filling opening length: 2,000 mm, bale width: 1,100 mm, bale height: 1,100 mm, oil tank capacity: 3,100 l, power: 150 kW (203.94 HP), year of last overhaul: 2025, Technical data baler: Manufacturer MACPRESSE EUROPA S.R.L. Typ 112 Year of construction 2002, partially refurbished in December 2025 Operating hours 44,590 hours, stand December 2025 Press power main press 200 tons Specific press capacity 16,5 kg/cm² Feed channel 2,000 x 1,020 mm Filling volume 2,65 cm³ Theoretic throughput rate 795 m³/h Bale size 1,100 x 1,100 mm, length variable Driving motor 2 x 75 kW Tying system 5-fold horizontal, full automatic Throughput rate at MSW approx. 48 up to 54 tons/h, depends on material Volume hydraulic oil tank 3,100 l Machine weight baler approx. 50,8 tons Scope of delifery: 1 piece baler MACPRESSE, type 111A 1 operating manual with CE declaration, electrical and hydraulic circuit diagram Comments: The machine was serviced and partially overhauled in our workshop. The following work was carried out and parts replaced: • Hydraulic oil tank emptied and cleaned Bcjdpfx Afox Dnb Ueheu • Oil and air filters replaced • New hydraulic oil filled • All hydraulic hoses replaced • Press ram dismantled, broken down into individual parts, mechanics made operational • Front two main rollers replaced • Knives on the press ram replaced • Main hydraulic cylinder dismantled, disassembled, cylinder tube and piston rod checked, complete seal set replaced • Counter knife in the frame replaced • Knife gap adjusted to approx. 3 mm • Upper steel guide rails in the frame on the left and right replaced. • Worn press base cut out, base plate replaced with wear-resistant HARDOX steel. • Binding and twisting unit dismantled, broken down into individual parts, mechanics made functional, all twisting shafts and ball bearings replaced. • All wire rollers in the needle heads replaced • Wire knives cleaned and readjusted, chains greased and tensioned • All wire deflection rollers made operational • All door contact switches replaced • Wirbulator device dismantled, disassembled and made operational • General maintenance work carried out Finally, the press was subjected to a machine test in manual and automatic mode, see our video for the machine function test. The documentation (BA, CE, electrical/hydraulic circuit diagram) is complete. Viewing is possible by appointment. We accept no liability for the technical specifications or any errors.

Condition: used, Speed-Tech Equipment horizontal cardboard baler, bales are approx. 1200 lbs., 6' long x 36" wide x approx. 28" tall, 3 phase, in working condition, winning bidder responsible for proper removal. Bsdpexd D Nzofx Afhocu

Year of construction: 2014, condition: like new (used), COOLING (FREEZING) HORIZONTAL TUNNEL Model ZIP FREEZ SILVER LINE 2, Bcedpfeyf Hlisx Afheu type 90X12 Made by SEPAR, France Was used for cooling of the hot filled desserts In complete with Associated Controls, Conveyor and Pipework

Condition: excellent (used), Year of construction: 2014, Horizontal conveyor 2000x800mm year 2014 price: €1,850.00 Bcjdpfxsu N Aykj Afhsu contact: Mr. Rainer Eckerle

Condition: excellent (used), Year of construction: 2015, Horizontal conveyor 3000x800mm Bodpfx Afju N Argehocu year 2015 price: €2,450.00 contact: Mr. Rainer Eckerle

Condition: excellent (used), Year of construction: 2015, Horizontal conveyor 3000x800mm year 2015 price: €2,450.00 Bcsdou U Ii Eepfx Afhou contact: Mr. Rainer Eckerle

Condition: excellent (used), Year of construction: 2014, Horizontal conveyor 2000x800mm year 2014 price: €1,850.00 Bjdsu N Axgspfx Afhjcu contact: Mr. Rainer Eckerle

Condition: excellent (used), Year of construction: 2015, Horizontal conveyor 3000x800mm year 2015 price: €2,450.00 contact: Mr. Rainer Eckerle Bjdsu N Aqcopfx Afhecu

Condition: used, 50 m3 / 50,000 l horizontal steel tank Diameter: 2.50 m Length: 10 m Weight: 16 t The tank is pressurized. Bcedpfx Aoxtmzxefhou Steel thickness: 20 mm / 2 cm Pressure: up to 20 atmospheres Steel cradles (legs) included

Condition: refurbished (used), 105m3 horizontal steel tank with heating coil Diameter: 2.80m Length: 17.10m Bcodpoxqfwtjfx Afhju

Condition: used, total length: 5,300 mm, total width: 2,600 mm, total height: 3,00,03,500 mm, water tank capacity: 25,000 l, External dimensions: W 2600 mm, H 3000/3500 mm, L 5300 mm. Horizontal stainless steel tanks – 2 units. Manhole at the front 2.5" outlet at the end. AISI 304. Bodpfx Aownn Apefhecu

Condition: like new (used), Horizontal carbon steel tanks 73.000l Dim. 3x 11m Cyllinder thickness 8mm Bottom thickness 12mm Bcodpfx Aoibh S Hsfhou Equipped with a ladder.

Condition: excellent (used), Machine: Used Lindemann Sobod 8 Metal Baler Bale size: 400mm x 400mm Specifications: see table Bsdjxrz S Aspfx Afhscu Status: ready to use Condition: in very good maintenance condition Year of manufacture: unknown Power: electric Availability: March/April 2025

Condition: good (used), Protech Horizontal Collator Model: HC2010 Plastic belt, belt width: 250 mm Distance between dividers: 200 mm, divider height: 150 mm Clearance: 140 mm x 150 mm Bjdpfxov T D Dus Afhscu Total dimensions: 2900 mm x 560 mm x 1540 mm.

Condition: ready for operation (used), Year of construction: 2023, functionality: fully functional, spindle speed (max.): 14,000 rpm, number of slots in tool magazine: 133, TECHNICAL DETAILS Spindle speed: 14,000 rpm Coolant supply through the spindle: 70 bar MACHINE DETAILS Year of manufacture: 2023 EQUIPMENT Direct tapping Tool magazine with 133 storage positions Pallet changer Two pallets with tapped hole grid Eight adjustable rinse nozzles at the spindle Flow monitor for coolant through the spindle Cooling system with chip conveyor BSW880 Interface for mist extraction Visual tool breakage monitoring BTS Toolholder HSK-A63 Bcjdjyarhrjpfx Afhsu Coolant temperature control unit Direct measuring systems (glass scales) for X, Y, Z axes Three-axis workpiece probe (Marposs Mida T25G) Double-layer cooling system (BDW 880) Automatic central lubrication Programmable axis mirroring Tool offset storage with 400 memory slots 54 (6+48) freely selectable workpiece coordinate systems Three-color signal lamp

Condition: ready for operation (used), Year of construction: 2017, operating hours: 5,214 h, functionality: fully functional, travel distance X-axis: 730 mm, travel distance Y-axis: 730 mm, travel distance Z-axis: 880 mm, controller model: SINUMERIK 840 D sl/operate, spindle speed (max.): 20,000 rpm, TECHNICAL DETAILS Travel X-axis: 730 mm Travel Y-axis: 730 mm Travel Z-axis: 880 mm Max. main spindle speed: 20,000 rpm Max. torque: 250/104 Nm Tool holder: HSK-A63 Distance spindle center to table: 80 - 810 mm Distance spindle nose to table center: 70 - 950 mm Number of pallets: 2 Pallet size: 500 mm x 500 mm Max. workpiece weight: 500 kg Pallet change time: 9.0 s Max. workpiece diameter: 800 mm Max. workpiece height: 1,000 mm Number of tool stations: 40 Tool change time (tool to tool): 2.5 s Tool change time (chip to chip): 4.4 - 10.0 s Max. tool diameter: 70 mm Max. tool length: 550 mm Max. tool weight: 12 kg Rapid traverse speed: 60,000 mm/min Bedpfjyapvajx Afhscu MACHINE DETAILS Control: SINUMERIK 840 D sl/operate High-pressure coolant: 70 bar Dimensions & Weight Floor space required: 6,000 mm x 4,000 mm x 2,700 mm Machine weight: 12.0 t Operating hours: 5,214 h EQUIPMENT Pallet changer Coolant tank Tool breakage monitoring

Condition: ready for operation (used), functionality: fully functional, turning diameter: 1,700 mm, center height: 630 mm, center width: 4,000 mm, spindle speed (max.): 400 rpm, empty load weight: 4,000 kg, TECHNICAL DETAILS Centre height: 630 mm Swing diameter over bed: 1,300 mm Swing diameter over carriage: 1,000 mm Swing diameter over removable bed section: 1,700 mm Centre distance: 4,000 mm Bed width: 700 mm Spindle bore: 120 mm Spindle speed: 2.8 - 400 rpm MACHINE DETAILS Control: Conventional Dimensions & Weight Dimensions (L x W x H): 6,800 x 2,200 x 2,000 mm Unladen weight: 11,000 kg Transport packages: 2 EQUIPMENT Documentation Three-jaw chuck Four-jaw chuck Removable bed section Quick-change tool holder Fixed steady rest Bcodjydv N Ujpfx Afheu Travelling steady rest

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, travel distance X-axis: 650 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 650 mm, controller model: Siemens 840 D, spindle speed (max.): 10,000 rpm, TECHNICAL DETAILS Travel X-axis: 650 mm Travel Y-axis: 500 mm Travel Z-axis: 650 mm B-axis: 360,000 x 0.001 mm Pallet size: 400 x 500 mm Spindle speed: 50 – 10,000 rpm Bcodpfxjya Ed Ho Afhou Tool holding system: SK 40 Number of tools in magazine: 60 Rapid traverse: 40 m/min Feed rate: 1 – 20,000 mm/min MACHINE DETAILS Control system: Siemens 840 D Power requirement: 65 kW

Condition: used, power: 300 kW (407.89 HP), fuel type: hybrid, color: orange, emission class: euro5, Type of fuel: Hybrid (electric and petrol) Field of application: Mining Empty weight: 54.000 kg Dimensions (LxBxH): 1620 x 325 x 370 cm Bedpoyf Urwsfx Afhjcu Make of engine: Perkins Emission class: EEV Productivity: 350 tph Capacity 200 - 350 t/h Opening Size 1,200 x 900 mm Rotor Size 1100x1300mm Weight 54,000 kg Transport (mm) 16,200 x 3,250 x 3,700 Operation (mm) 16,400 x 6,350 x 4,150

Condition: used, power: 300 kW (407.89 HP), fuel type: hybrid, color: orange, emission class: euro5, Type of fuel: Hybrid (electric and petrol) Field of application: Mining Empty weight: 54.000 kg Dimensions (LxBxH): 1620 x 325 x 370 cm Make of engine: Perkins Emission class: EEV Bcjdpfeyf Db Usx Afhou Productivity: 350 tph Capacity 200 - 350 t/h Opening Size 1,200 x 900 mm Rotor Size 1100x1300mm Weight 54,000 kg Transport (mm) 16,200 x 3,250 x 3,700 Operation (mm) 16,400 x 6,350 x 4,150

Condition: used, Used Flottweg model Z4D-3/409 Sedicanter horizontal decanter centrifuge. Bowl made of duplex stainless steel 1.4463, has inside diameter 470 mm, maximum rotation speed 4800 rpm, maximum sediment density 1.3 kg/dm3, maximum working temperature 50°C. Scroll and inlet protected by tungsten carbide. Unit driven by 30 kW motor. Includes hydraulic device for screw drive with power consumption 7.5 kW and differential 2-25 rpm, control panel and technical documentation. Specifications: Bowl Diameter (Length): 18.504" Material Of Construction: Duplex Stainless Steel 1.4463 Motor Power: 30 hp Max Bowl Speed: 4,800 RPM Bodpfxoyc Tqtj Afhjcu Conveyor Material: Tungsten Carbide

Condition: excellent (used), Year of construction: 1991, Diameter over bed: 1020mm Diameter over slide: 620mm Turning length: 3000mm Bjdpfx Asyghv Sjfhecu

Condition: ready for operation (used), Year of construction: 1967, Swing over bed: 800mm Swing over support: 450mm Turning length: 2800mm Workpiece weight: 5000kg Bedpfeyghprjx Afhjcu

Condition: good (used), Europress by CK. press force 30 t. Bale weight 280-320 kg Bcedpfxjycw Ebe Afhou

Condition: good (used), Verical baler with 30 t press force Bsdpfx Aeycw Dwofhecu