Used Nameplate for sale (812)

Condition: good (used), operating hours: 20,080 h, functionality: fully functional, machine/vehicle number: Kf262 622 E35, overall weight: 720 kg, load capacity: 12 kg, arm reach: 2,665 mm, pivoting range: 300 °, Equipment: documentation/manual, Complete automated glazing and handling solution For sale is an automated robot glazing cell with a Kawasaki 6-axis glazing robot, a Yaskawa handling robot, a CeramDetect 3.0 workpiece recognition system, a base cleaning machine, and a feeding and transport system. System overview: - Complete automated robot glazing cell for ceramic sanitaryware - Automated material flow from the feed conveyor, via workpiece recognition and carousel, to the glazing, base processing, and transfer to the transport system - Designed for different sanitaryware models - Sold as a complete process solution with robotics, recognition, and handling Fpedpfx Aezz Ra Usatol Glazing robot: - Manufacturer: Kawasaki Robotics. Type: KF262, 6-axis industrial robot, used for automated glazing/coating of sanitaryware Handling/transfer robot: - Manufacturer: Yaskawa Europe GmbH - Series: Motoman ES165D - Robot type: YR-ES0165D-B00 - Controller: Yaskawa DX100 - Date according to nameplate: 03.10.2013 - Power supply: 3-phase, 400 / 415 / 440 V, 50 / 60 Hz - Average power: 5.0 kVA - Full load current: 14.4 A - CE marking present - Function: automated transfer between carousel, base cleaning station, and transport system Workpiece recognition – CeramDetect 3.0: - CeramDetect 3.0 for automatic workpiece and position recognition - CeramDetect laser module and camera - Recognition in the area of the transfer from the feed conveyor to the carousel - The existing CeramDetect software is offered together with the system Base cleaning machine: - Automated base cleaning machine as part of the robot cell - Transfer and removal are carried out by the Yaskawa handling robot Other system components: - Feed conveyor for workpiece feeding - Automated transfer device from the feed conveyor to the carousel - Carousel for positioning and transferring the workpieces - Transport system for receiving the finished workpieces - Protective and safety devices - Control and electrical components of the entire system Material flow: 1. Feeding of the sanitaryware via a feed conveyor 2. Removal of the workpieces from the feed conveyor via an automatic transfer device 3. Transfer of the workpieces to the carousel 4. Workpiece recognition takes place at the transfer position using CeramDetect 5. Type and position of the workpiece are recorded for the automated glazing process 6. Transport of the workpiece on the carousel to the glazing position 7. Automatic glazing by the Kawasaki 6-axis glazing robot 8. Transfer of the workpieces by the Yaskawa handling robot to the base cleaning station 9. Transfer to the base cleaning station and subsequent removal 10. Placing the workpieces on a transport system Special advantages: - Automatic workpiece recognition and position determination - Flexible processing of different sanitaryware models - Combination of glazing robotics, automated handling, and base cleaning - Complete process cell instead of individual robot components Scope of supply and notes: - The sale includes the existing components of the described robot glazing cell - Technical documentation, circuit diagrams, robot programs, and existing software versions will be provided with the system, subject to availability - Dismantling, loading, and transport need to be coordinated Further technical details can be provided.

Condition: like new (used), Year of construction: 2016, operating hours: 8,620 h, functionality: fully functional, machine/vehicle number: TX3A, pressure: 4 bar, power: 323 kW (439.16 HP), temperature: 110 °C, operating temperature: 110 °C, total height: 1,460 mm, total length: 2,330 mm, nominal heat output: 300 kW (407.89 HP), total width: 905 mm, empty load weight: 800 kg, Viessmann boiler, 300 kW, type Vitoplex 300. Includes burner and boiler, plus extras, complete installation. Orange Viessmann control panel, type Vitoplex 300. Nameplate: Viessmann Vitoplex 300, type TX3A, serial number 7452986200118. Nominal power (oil/gas): 300 kW. Firebox nominal: 323 kW. Water content: 430 l. Max. pressure: 4 bar. 110 °C. 230 V / 50 Hz / max 6 A. CE-0085 BT0478. Works perfectly, still needs to be dismantled. Fsdpfxjz Aayye Aatspl Available for pickup in 3850 Nieuwerkerken.

Condition: used, Year of construction: 2008, functionality: unexamined, overall weight: 1,270 kg, load capacity: 210 kg, arm reach: 2,650 mm, pivoting range: 360 °, controller manufacturer: FANUC, controller model: R-J3iB, teach pendant manufacturer: FANUC, teach pendant model: A05B-2452-C154 (abgebildet), input voltage: 380 V, type of input current: three-phase, repeat accuracy: 0.3 mm, A total of 7 FANUC R-2000iA/210F heavy-duty industrial robots are for sale. Available years/months: - 2 units: 08/2006 Fpjdpezzr I Tjfx Aatol - 1 unit: 06/2007 - 3 units: 02/2008 - 1 unit: 03/2008 Individual sales are possible. The stated price applies net per unit, EXW Kirkel. For the purchase of multiple units, we offer an additional package discount upon agreement. Technical data: - Design: 6-axis articulated arm robot, floor mounting - Maximum payload at the wrist: 210 kg - Reach: 2,650 mm - Repeatability: ±0.3 mm - Mechanical weight of the robot: 1,270 kg - Axis speeds J1–J6: 95 / 90 / 95 / 120 / 120 / 190 °/s - Protection rating: Wrist and J3 arm IP67, other robot parts IP54 - Controller: FANUC SYSTEM R-J3iB - Controller power supply: 380–415 / 440–500 V AC, 3-phase, 50/60 Hz, 12 kVA - Weight of the FANUC control cabinet: approx. 180 kg - Teach pendant / handheld device included Scope of supply as shown in the images or upon agreement: - FANUC R-2000iA/210F robot arm with base - FANUC R-J3iB controller - FANUC teach pendant - Connection cables - Bosch Rexroth control cabinet with PSB6000 component shown in the photo for the pictured package The photos show an example unit from 02/2008 (robot type A05B-1324-B215). Equipment, nameplates and scope of supply may vary per unit and will be confirmed before the sale. Condition: used, with visible signs of wear and tear as well as paint damage due to age and use. The robots were functional until the time of dismantling. No further functional testing was carried out after dismantling. Therefore, the functionality is indicated as unverified for precautionary reasons. Operating hours are not documented. Price net, EXW Kirkel. Loading and organization of transport are possible for an additional charge and upon prior agreement. The transport costs depend on the destination and scope. Sale subject to prior sale.

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 050.940-08, LUTRO Painting and Drying System – 2 Booths + Dryer – Year of Construction 2008 Price: €24,900 (negotiable) net Dismantling and removal to be carried out by the buyer For sale is a comprehensive LUTRO painting and drying system for professional/industrial use. The system was manufactured in 2008 by LUTRO Luft- und Trockentechnik GmbH and, according to the available nameplates, consists of two booths and one dryer. The system also includes the existing ventilation/filtration system, heating/burner technology, and the electrical control system with a Siemens SIMATIC touch panel. The system is currently still assembled on-site. This allows a prospective buyer to gain a good impression of the layout, components, and scope of the system before purchase. System components: 1. LUTRO KSP 7 BT Manufacturer: LUTRO Luft- und Trockentechnik GmbH Type: KSP 7 BT Year of Construction: 2008 Manufacturer's Part Number: 050.940-08 Max. component length: 6.0 m Max. component width: 3.5 m Max. component height: 2.0 m Max. wheel load: 700 kg Usable volume: 81 m³ Total steam volume: 127 m³ Connected power according to nameplate: 7.5 kW Air velocity: 0.24 m/s Air flow rate: 24,000 m³/h Minimum exhaust air volume flow: 1,440 m³/h Maximum permissible oven temperature: 90 °C Maximum permissible solvent quantity per drying cycle: 1,713 g Maximum permissible solvent quantity during spray operation: 80,000 g/h 2. LUTRO KSP 8 BT Manufacturer: LUTRO Luft- und Trockentechnik GmbH Fpodpszwvb Asfx Aatjl Type: KSP 8 BT Year of Construction: 2008 Manufacturer's Part Number: 050.940-08 Max. component length: 6.5 m Max. component width: 3.5 m Max. component height: 2.5 m Max. wheel load: 1,000 kg Usable volume: 122 m³ Total steam volume: 178 m³ Connected power according to nameplate: 11 kW Air velocity: 0.23 m/s Air flow rate: 30,000 m³/h Minimum exhaust air volume flow: 1,800 m³/h Maximum permissible oven temperature: 90 °C Maximum permissible solvent quantity per drying cycle: 2,321 g Maximum permissible solvent quantity during spray operation: 100,000 g/h 3. LUTRO TR 1 Dryer Manufacturer: LUTRO Luft- und Trockentechnik GmbH Type: TR 1 Year of Construction: 2008 Manufacturer's Part Number: 050.940-08 Max. component length: 6.0 m Max. component width: 3.5 m Max. component height: 2.0 m Max. wheel load: 700 kg Usable volume: 81 m³ Total steam volume: 107 m³ Connected power according to nameplate: 4 kW Air velocity: 0.15 m/s Air flow rate: 15,000 m³/h Minimum exhaust air volume flow: 900 m³/h Maximum permissible oven temperature: 90 °C Maximum permissible solvent quantity per drying cycle: 1,307 g Maximum permissible solvent quantity during spray operation: 50,000 g/h Equipment / existing components Based on a visual assessment, the system includes, among other things: 2 LUTRO booths 1 LUTRO dryer Large-area floor extraction with grating Ceiling filter/supply air system Supply and exhaust air technology Ventilation units Heating/burner technology Air ducts Electrical switch cabinets LUTRO system control Siemens SIMATIC touch panel Booth doors and personnel doors with viewing windows Lighting and other existing system equipment In principle, the system scope present on-site will be sold. Condition The system is in used condition, reflecting its age, and is currently still assembled. Important note regarding dismantling and transport Dismantling is not included in the purchase price. Price €24,900 (negotiable) net Inspection / further information An inspection of the system is possibl

Condition: like new (used), Year of construction: 2022, operating hours: 7 h, functionality: fully functional, input voltage: 230 V, type of input current: AC, laser power: 3 W, type of cooling: air, total width: 300 mm, total height: 125 mm, total length: 330 mm, working range: 300 mm, overall weight: 44 kg, scan area length: 330 mm, scan area width: 330 mm, travel distance X-axis: 330 mm, travel distance Y-axis: 330 mm, travel distance Z-axis: 42 mm, input current: 4 A, laser wavelength: 355 nm, path measurement accuracy: 5 mm, ambient temperature (max.): 40 °C, input frequency: 50 Hz, Equipment: documentation/manual, KEYENCE MD-U1020C – 3-Axis UV Laser Marker (wide marking area) Fedpszw U T Refx Aatepl 3 identical units available. Built July 2022, delivered new in 2023, only 7 operating hours each. Practically as new, tested and fully functional. DELIVERY AND ON-SITE FUNCTION TEST – INCLUDED IN THE PRICE We deliver personally to your address anywhere in the EU/EEA, by van. No pallet, no freight terminals, no forwarder handling of the sensitive optics – direct door to door. On arrival the system is connected, powered up and a test marking is produced in your presence before handover. You take delivery of a machine you have seen running at your own site, not a crate on a pallet. Scope of the on-site test: connection, power-up and test marking with the supplied system. Integration into an existing production line, fixtures, tooling and application programming are not included, but can be quoted separately. Collection ex works in Örebro, Sweden is of course also possible. SCOPE OF SUPPLY (per unit) - MD-U1020C marking head, 355 nm UV, 18.0 kg, IP64 - MC-P1 controller unit, 23.5 kg - Operating console, 2.0 kg - Connecting cables, 4.3 m TECHNICAL DATA - Laser medium: YVO4, wavelength 355 nm (UV), laser class 4 - Laser power: 3 W at 40 kHz (2.5 W at the focal point) - Marking area: 330 x 330 x 42 mm (true 3-axis control, wide-area type) - Standard working distance: 300 mm - Marking resolution: 5 µm - Max. scanning speed: 8,000 mm/s - Digital galvo scanner with linear motor drive, built-in power meter - Interfaces: RS-232C, USB 2.0, Ethernet (10BASE-T / 100BASE-TX) - Power supply: 100–240 V AC ±10 %, 50/60 Hz, max. 800 VA (approx. 250 W average) - Cooling: forced air – no external chiller required - Ambient temperature: 0 to +40 °C - Weights: head 18.0 kg / controller 23.5 kg / console 2.0 kg APPLICATION The 355 nm UV wavelength marks heat-sensitive materials without thermal damage ("cold marking"): plastics and resins, glass, ceramics, films, PCBs, medical devices, connectors and nameplates. High-contrast, permanent, legible codes and logos with minimal material stress. COMMERCIAL Price is per unit, net, delivered. Units can be sold individually or as a package of three. Inspection and test marking under power is also possible by appointment at our location in Örebro, Sweden before purchase. Please contact us for photos, serial numbers and further details.

Condition: used, Year of construction: 2010, machine/vehicle number: 2067, functionality: fully functional, power: 6.5 kW (8.84 HP), input voltage: 400 V, input current: 20 A, input frequency: 50 Hz, type of input current: AC, total height: 2,000 mm, total length: 1,500 mm, total width: 2,000 mm, overall weight: 750 kg, Equipment: CE marking, documentation/manual, TARTLER NODOPUR VS-AR-2K – 2-Component Metering and Mixing System – Year of Manufacture 2010 – For sale is a used 2-component metering and mixing system, TARTLER NODOPUR VS-AR-2K. It was used in an industrial setting and shows corresponding signs of wear. Technical data: • Manufacturer: Ing. Büro Tartler GmbH / TARTLER • Type: NODOPUR VS-AR-2K • Machine No.: 2067 • Year of Manufacture: 2010 • Operating Voltage: 400 V AC • Frequency / Current Consumption: 50 Hz / 20 A • Power according to nameplate: 6.5 kW • Operating Pressure according to nameplate: 6–8 • Dimensions: approx. 1,500 × 2,000 × 2,000 mm incl. refill system • Weight: approx. 750 kg, depending on the equipment Control / Drive • Siemens PLC / SIMATIC Panel MP377 • Frequency Inverter A/B: Lenze, 1.50 kW • Drive Motor A/B: 1.50 kW • Mixing Head Type: LC 6/3 • Electric Motor Mixing Head: Emod, 1.1 kW Metering Technology Component A • Metering Pump: KTS 32 • Delivery Volume: 32 cm³ / 30 ccm/stroke • Volumetric Meter: VSI 0.1/16 EPC S4V Component B • Metering Pump: FPN 16.0 • Delivery Volume: 16 cm³ / 16 ccm/stroke • Volumetric Meter: VSI 0.2/16 EPO 12 V Containers / Material Supply • 1 × Stainless Steel Container A, approx. 60 liters • 1 × Stainless Steel Container B, approx. 60 liters • Containers with Mini-/Maxi-Level Monitoring • Container Pre-Pressurization • Silica Gel Filter • Container Agitator • Automatic Refill from 200-Liter Containers • Diaphragm Pumps for Component A and B Hose Assembly • Component A: approx. 6.12 m / DN 16 • Component B: approx. 6.42 m / DN 10 Equipment: The equipment includes, among other things: • Metering and mixing system for two components • Mixing head • Siemens control panel • Metering pumps A and B • Volume flow measurement • Stainless steel material containers • Agitators • Automatic refill system • Diaphragm pumps Fpedpfxezvmihj Aatol • Hose package • Signal light / Traffic light • Control cabinet • Various sensors and pressure regulators Condition: The system is in used condition. Age- and use-related signs of wear as well as material residues are present. The optical condition can be clearly seen in the current photos. An inspection of the system is possible after prior appointment. A function test can also be carried out after consultation. Sale: Price: €17,500 (negotiable) plus VAT. Inspection and collection by appointment. Sale preferably to commercial businesses. If you are interested or have technical questions, we will be happy to send you further pictures and information.

Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, For sale are 3 Erema regranulation systems. The nameplates and details can be seen in the photos. Inspections can be arranged by appointment. Fpsdpfxezx D U Ho Aatel

Condition: used, Year of construction: 2004, functionality: fully functional, machine/vehicle number: 56535, Double-face circular knitting machine with electronic needle selection, Mayer & Cie. model OVJA 1.6 E, machine number 56535, year 2004. Manufactured in Germany and CE marked on the nameplate. NAMEPLATE DATA: Nominal diameter: 660 mm / 26 inches · Gauge: 20 E · Pitch: 1.27 mm · Number of needles: 1638 · Operating voltage: 380 V · Control voltage: 24 V · Frequency: 50 Hz · Power: 4.0 kW · Electrical diagram number: 191353.2 APPLICATION: Double-face knitted fabric with electronic jacquard: fabrics for mattresses, quilts, cushion covers, and outerwear. EQUIPMENT: Mayer & Cie. control cabinet with display and programming keyboard · Main switch and start/stop push-button panel · Complete perimeter guards · Official Mayer & Cie. service sticker on the cabinet CONDITION: Complete machine, assembled and not disassembled. Fabric remains in the machine from the last production run. An inspection visit and on-site operational test can be arranged. DIMENSIONS AND TRANSPORT (approximate): Length 2.70 m · Width 2.00 m · Height 2.70 m · No need to disassemble it to move it out of the building · Location: Albacete, Spain IMPORTANT NOTE FOR EXPORT: The electrical panel indicates 50 Hz. Before purchasing from a country with a 60 Hz power grid, please consult us. The number of feeders has not been counted; it will be confirmed upon request. Fpsdpfxozvht Is Aatjl

Condition: excellent (used), Year of construction: 2008, operating hours: 29,000 h, functionality: fully functional, MANDELLI Storm 2500 Horizontal Machining Center / Flexible Manufacturing Cell Manufacturer: Mandelli Sistemi S.p.A. Model: Storm 2500 Type: U 42 / 8000 Factory No.: XXXX Year of manufacture: 2008 Origin: Italy Control: Siemens Sinumerik 840D System Control: CswWin / Beckhoff Industrial PC Condition/Maintenance: Very good / Single-shift machine / Very low operating hours Technical Data: X-axis travel: 2,600 mm Y-axis travel: 1,500 mm Z-axis travel: 1,800 mm B-axis: 360,000 positions / continuous APC / Pallet axis: 360,000 positions Rapid traverse linear axes: 35 m/min B-axis speed: 8 rpm Accuracy to VDI 3441: Positioning accuracy P: 10 µm Repeatability Ps: 5 µm Spindle / Head: U-head horizontal / vertical Spindle taper: ISO SK 50 Speed range: 37 – 6,000 rpm Spindle power: 44 kW Max. torque: 706 Nm Tool Magazine: 208 tool positions Rack tool magazine with automatic tool handling Max. tool length: 600 mm Max. tool diameter: 450 mm Max. tool weight: 35 kg Pallet System: Front transpallet / automatic pallet change system 6 pallets, each 1,000 x 1,250 mm 4 fixed stations Rotary unit for loading and unloading workpieces Electrical Data (as per nameplate): System: S2500 / 840D Rated voltage: AC 400 V, 3 Ph / PE Frequency: 50 Hz Current at full load: 178 A AC auxiliary voltage: 230 V DC auxiliary voltage: 24 V Standard: IEC 60204-1 / EN 60204-1 Chip Conveyor: Manufacturer: Meta Year of manufacture: 2007 Weight: approx. 1,100 kg Additionally, a screw conveyor is visible in the machine area. Equipment / Peripherals: Filtration unit Hydraulic power unit Chip conveyor Screw conveyor COSEMA peripheral unit Control cabinet system Coolant and lubricant periphery Separate operator panel Comprehensive pallet system Clamping Devices / Fixtures: Multiple heavy-duty angle plates, fixture plates, t-slotted/platen clamping plates, customer-specific clamping devices, and pallet setups are available. Fedpjy H D R Tsfx Aatjpl Tools / Accessories: Numerous SK50 tool holders, boring bars, boring tools, milling holders, drill and reaming tool holders, extensions, adapters, as well as various spare and standard tools are visible. Several hundred additional tool holders can be purchased on request. Optional / On Request: Apfel tool cabinets with extensive tool inventory Additional clamping devices and fixtures ELBO CONTROLLI tool presetting unit Workbenches / tool storage / racking systems by agreement The machine is in good, production-ready condition. This is a heavy-duty horizontal machining cell for the flexible complete machining of large and complex workpieces. The work area shows normal signs of wear characteristic of a production heavy machining system. The system must be removed from the facility in June 2026. Earlier availability possible by arrangement. Inspection under power is possible by appointment. All information provided to the best of our knowledge. Subject to errors, prior sale, and technical modifications.

Condition: used, Year of construction: 2014, operating hours: 3,473 h, fuel type: diesel, MOFFET M4 25.3 PIGGYBACK FORKLIFT ? 2.5T ? DUPLEX MAST ? ----VEHICLE HISTORY * VIDEO AVAILABLE UPON REQUEST ----Vehicle Data Manufacturer: Moffett / Cargotec Ireland Ltd. * Type: M4 25.3 * Year of Manufacture: 04/2014 * Serial Number: N150234 * Operating Hours: approx. 3,473 h * Own Weight: 2,200 kg * Load Capacity: 2,500 kg * Load Center: 600 mm Drive Diesel Engine * hydrostatic drive, as far as can be determined on the unit * 3-wheel chassis * all-terrain design Lift Mast Duplex Mast * hydraulic lift mast Fpodpfx Aaszz Ed Iotsl * Lifting Height: approx. 4 m * robust mast guide * fork carriage Fork Equipment Fork Tines * hydraulic fork carriage * Reach Forks / Telescopic Forks according to documents * MSE KOOI Reach Forks * Type RE * Serial Number 1430060 Hydraulics Hydraulic Lifting Function * hydraulic mast actuation * hydraulic controls at the driver's station * additional hydraulic functions on the fork carriage, as far as can be determined from the images Chassis 3-Wheel Concept * large, rugged tires * all-terrain tires * compact piggyback forklift design * lateral support/wheel arm construction Driver's Station Open Driver's Cab * Driver's seat * Seat belt * Steering wheel * Control levers for hydraulic functions * Instrument/control display * Hour meter Lighting Front Headlights * Rear Lights * Turn Signals / Position Lights * Rotating Beacon Safety Driver Protection Bar * Seat Belt * Warning Lights * Acoustic Warning Device * CE Marking * Sound Power Level 107 dB LWA * Declaration of Conformity available Design / Application Piggyback Forklift * suitable for truck transport * compact design * suitable for construction sites and off-road use * laterally transportable / foldable chassis construction Tires Rugged Industrial Tires * Off-road profile * Different signs of use on the tires are visible * Tread partially still present Condition Used Overall Condition * Signs of wear and tear due to age and use * Paint damage present * Signs of rust / surface corrosion * Fork tines with signs of wear Documentation CE Marking * Declaration of Conformity for Reach Forks available * Nameplate available ----* EXPORT SALES ONLY WITH DEPOSIT MIN. 500 EUR * EXPORT SALES ONLY WITH DEPOSIT MIN. 500 EUR - 2000 EUR EXPORT REGISTRATION CUSTOMS EXW IN 10 MINUTES (AUTHORIZED EXPORTER) 5 DAYS, 15 DAYS, 30 DAYS PLATES AND 15 DAYS AUSTRIA PLATES EURO 1 TECHNICAL DATA SHEET VEHICLE RESERVATIONS PLEASE ONLY VIA THE E-MAIL FUNCTION VERBAL RESERVATIONS ARE NOT VALID A deposit of at least 500.00 EUR / 1,000.00 EUR will be charged for sales to EU and third countries. Changes, errors and prior sale reserved! You can find more vehicles on our Sales are exclusively subject to our general terms and conditions - see homepage. Important Note - Important Information: Despite careful checking of all details in our offer, errors may occur. These are sometimes caused by transmission errors in the systems.

Condition: used, Year of construction: 2013, functionality: fully functional, machine/vehicle number: PL260-091, type of input current: three-phase, input voltage: 380 V, total width: 4,500 mm, total length: 7,500 mm, total height: 1,500 mm, type of cooling: water, overall weight: 9,100 kg, cutting current: 260 A, sheet thickness steel (max.): 38 mm, open-circuit voltage: 380 V, working range: 60 mm, table length: 6,000 mm, table width: 3,000 mm, working width: 3,000 mm, For sale: AKYAPAK HPR 260 industrial CNC machine for thermal cutting of sheet material, manufactured in 2013. The machine is of the gantry type, with a working area of 3000 × 6000 mm, suitable for cutting large-format steel sheets. It is equipped with a Hypertherm HPR260 / HPR260XD plasma system, Hypertherm MicroEDGE Pro / Edge Pro CNC control interface, as well as equipment for oxy-fuel cutting. The machine is suitable for the production of metal structures, plates, flanges, blanks, sheet steel parts, and for heavy industrial applications. Key technical specifications: Parameter Data Manufacturer AKYAPAK Model HPR 260 Machine type CNC plasma and oxy-fuel cutting machine Year of manufacture 2013 Machine serial number PL260-091 Working area 3000 × 6000 mm CNC control Hypertherm MicroEDGE Pro / Edge Pro Operating system Windows XP Plasma source Hypertherm HPR260 / HPR260XD Plasma serial number 260XD-004364 Plasma output current 260 A Duty cycle 100% Machine nameplate power 60 kW Power supply 380 V / 50 Hz Weight 9010 kg Origin Turkey CE marking Yes Equipment and features The machine includes: CNC gantry structure; working table 3000 × 6000 mm; Hypertherm HPR260 / HPR260XD plasma system; Hypertherm MicroEDGE Pro / Edge Pro CNC control; Hypertherm gas console; gas regulators; plasma cutting torch; Fpsdpfxszibqao Aatel oxy-fuel cutting head; torch height control; slotted table with slats; fume extraction / aspiration system through the table; operator console with joystick, Start/Stop, emergency stop, and manual modes. Cutting capacity The Hypertherm HPR260 plasma system is a 260 A industrial system for high-quality plasma cutting. Approximate capacity for mild steel: production piercing: approximately 32–38 mm, depending on the material, gases, and settings; maximum cutting from edge: up to approximately 60–64 mm; oxy-fuel cutting allows for working with thicker steel sheets, depending on the settings, nozzles, and gas equipment.

Condition: used, Year of construction: 2020, functionality: fully functional, machine/vehicle number: 20001901, type of input current: three-phase, overall weight: 990 kg, input voltage: 400 V, total width: 1,780 mm, total length: 2,130 mm, total height: 3,070 mm, volume flow: 14,000 m³/h, filter area: 189 m², suction capacity: 14,000 m³/h, power: 15 kW (20.39 HP), input frequency: 50 Hz, input current: 26 A, intake vacuum (max.): 48 mbar, actuation type: electric, ESTA DUSTMAC F-189 industrial welding fume extraction/filtration unit for sale. Suitable for extracting and filtering welding fumes and dust from multiple extraction points, welding booths, or large capture hoods. Main technical specifications: - Manufacturer: ESTA - Model: DUSTMAC F-189 - Year: 2020 - Serial No.: 20001901 - Filter surface area: 189 m² - Number of filters: 9 pcs - Max. airflow rate: approx. 14,000 m³/h - Max. negative pressure: approx. 4,800 Pa - Main fan motor power: 15 kW - Voltage: 400 V / 50 Hz - Motor speed: 2945 rpm - Current: 25.9 / 15 A (according to the motor nameplate) - Approx. dimensions: 2,130 x 1,780 x 3,070 mm - Weight: 990 kg (according to the nameplate) Fpjdpfx Ajzuwqtoatsl The unit was reportedly used for approximately one year and then put into storage. Used equipment, sold as-is. Currently visible but not connected to power. Condition and completeness are shown in the photos. Location: Estonia. Loading: Forklift capability is available on-site. We can load the equipment onto the buyer’s truck. Transport: Transportation costs are the responsibility of the buyer.

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 8Q00001264, For sale is a powerful and precise Wittmann linear robot W822-1264 for injection molding applications and automation tasks. The unit is packaged and secured on a Euro pallet and comes with the matching handheld device (teach pendant), emergency stop buttons, cabling, and the original technical documentation. The unit is in good condition and fully functional after disassembly. Technical data (according to the nameplate): Manufacturer: Wittmann Kunststoffgeräte GmbH (Vienna, Austria) Model / Type: W822-1264 Article number: 8Q00001264 Year of manufacture: 2015 Payload: 15 kg Travel distances / stroke (X / Y / Z): X-axis (ejection stroke): 550 mm Y-axis (vertical stroke): 1200 mm Z-axis (lateral stroke / main axis): 2500 mm Supply voltage: 360V – 400V (50/60 Hz, 3PH/N/PE) Fsdpfxezu Rzfs Aatspl Connected load: 1.9 kVA Weight: 275 kg Scope of supply & components: - Main unit / linear robot Wittmann W822-1264 - Pneumatic / gripper head with C-axis / swivel function and pneumatic valve blocks (SMC). - Including energy chains / drag chains for organized cable and hose routing. - Control system & operating unit - Original Wittmann Teachbox R8 / touch-screen handheld device with protective housing. - Additional handheld unit with emergency stop switch and function buttons. - External button boxes / control elements (including EMERGENCY STOP, quality control part, etc.). - Complete cabling, oil cooler control lines, Harting multi-pin connectors, and pneumatic hoses. - Original folder "Wittmann Technical Documentation" (including circuit diagrams, operating manual, and documentation). Upon request, transport and loading can be arranged for an additional fee, throughout Europe. Prices plus VAT. Inspection possible by appointment. Contact us, our team will be happy to assist you further. Trade-in or exchange possible! Machine purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES, ETC. Do you need a high-quality but affordable metalworking machine for your production? Or do you want to sell yours? For further information or contact options, visit our website.

Condition: used, Year of construction: 2000, functionality: fully functional, machine/vehicle number: 6858, Jumberca MIL model double-sided circular knitting machine, machine number 6858, year 2000. Manufactured in Spain by Jumberca S.A. (Badalona, Barcelona). CE marked. NAMEPLATE DATA: · Diameter: 33 inches · Gauge: GG 18 · Number of needles: 1860 + 1860 · Maximum speed: 20 rpm · Power: 8.4 kW · Voltage: 380 V · Frequency: 50-60 Hz · Maximum air pressure: 6 bar · Weight: 2,890 kg · CE marking APPLICATION: Large-diameter double-sided knitted fabric: interlock, rib, fabrics for mattresses and home textiles. INSTALLED EQUIPMENT: · Control cabinet with start/stop buttons · Electronic lubricator Memminger-IRO Pulsonic 5.2, with oil · Upper fillet POWER SUPPLY: 50-60 Hz. The nameplate indicates 50-60 Hz, so the machine is suitable for both European networks and 60 Hz networks without frequency conversion. CONDITION: Complete and assembled machine. An on-site inspection and operational test can be arranged. Fsdpfxezvhzxe Aatjpl DIMENSIONS AND TRANSPORT: · Weight according to nameplate: 2,890 kg · Approximate dimensions: length 2.70 m · width 2.00 m · height 2.70 m · Location: Albacete, Spain.

Condition: used, Year of construction: 1989, machine/vehicle number: SN: 00789901, functionality: unexamined, pressing force: 815 t, Press 1, manufacturer: Umformtechnik Erfurt GmbH, type: PKZZI 800.1/3150x1600/500E, serial number: 00789901, year of manufacture approx. 1989, 8000 kN, last service in 10/2025, machine in operation until 12/2025. Technical data of the press according to the nameplate: Press force max. 8,000 kN – at a distance in front of the die of 12.5 mm Press force 2,500 kN – at a distance in front of the die of 200 mm Stroke rate in idle 10 to 20 min-1 Stroke of the ram 500 mm Adjustability of the ram: 500 mm Strip feed system consisting of: Roller feed, manufacturer: GSW Schwabe, type VRMA80/78, machine no. 2011-60187, year of manufacture 2011 with reel 1 (sandwich processing), SAWAB reel, year of manufacture 2011 with reel 2, manufacturer: GSW Schwabe, type: LMHR1000/1100, no.: M2011-00171, year of manufacture 2011 with reel 3, manufacturer: GSW Schwabe, type: MHR5/1400, serial no.: M2011-00170, year of manufacture 2011 including enclosure Fpedpfx Aaszvdm Rstjl GWS project no.: 2011-60187 with peripherals: - Conveyor belt - Raziol system Function and technical data not verified without additional items/without further accessories, unless explicitly stated as part of the item WE STRONGLY RECOMMEND PARTICIPATING IN THE INSPECTION! If interested, please contact us via email!

Condition: good (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: 122278, type of input current: AC, conveyor belt width: 650 mm, total width: 1,100 mm, total height: 1,900 mm, total length: 1,800 mm, overall weight: 400 kg, input voltage: 240 V, working height: 800 mm, input current: 3 A, compressed air connection: 6 bar, conveyor belt thickness: 2 mm, outer diameter: 450 mm, input frequency: 60 Hz, inner diameter: 200 mm, control voltage: 24 V, year of last overhaul: 2022, space requirement height: 2,100 mm, space requirement length: 2,300 mm, space requirement width: 1,600 mm, MOSCA SoniXs TR-6 Pro Strapping Machine | Year of manufacture 2022 | Good condition For sale is a high-quality automatic strapping machine from the German brand manufacturer MOSCA, model SoniXs TR-6 Pro. The machine dates back to 2022 and is in good used condition. It is ideally suited for professional use in production, shipping, logistics, warehousing and packaging. The MOSCA SoniXs series uses modern ultrasonic sealing technology and is designed for reliable and efficient strapping processes. The original new price was approximately €40,000. Technical data according to the nameplate: Manufacturer: MOSCA GmbH Model / Type: SoniXs TR-6 Pro Machine type: Strapping machine Year of manufacture: 2022 Machine number: 1322278 Power supply: 1L + N + PE Frequency: 50–60 Hz Voltage: 100–240 V Current consumption: 3.00–1.25 A Maximum fuse rating: 13 A Frame internal dimensions: 1000 mm x 1000 mm Condition: used, good Condition and inspection The machine shows the usual signs of wear for a used industrial machine. The exact scope of delivery and the optical condition can be seen in the pictures. An inspection and functional test after prior arrangement is expressly desired. Logistics and transport Collection: Preferred. Loading/transport: Loading or organization of transport can be arranged. Price and legal information Price: 16,000 EURO negotiable plus legal VAT. Invoice: You will receive a proper invoice with VAT shown. Fpsdpfx Aajztc S Hotjl Terms of sale: Sale exclusively to commercial customers (B2B) with exclusion of any warranty and guarantee. If you are interested or have any questions, please send us a message. We will gladly arrange an inspection appointment.

Year of construction: 2021, condition: ready for operation (used), functionality: fully functional, FLOW & THERMAL Regenerative Thermal Oxidizer (RTO), 18,000 Nm³/h (2021) Complete industrial system for the treatment of process water containing Volatile Organic Compounds (VOCs), consisting of stripping columns and a three-chamber Regenerative Thermal Oxidizer. Manufactured by Flow & Thermal Solutions / TECAM in 2021, the equipment was installed at a PET production plant and remained operational until the factory closed on 27 November 2025. The system removes VOCs from the water by means of air stripping and subsequently destroys them in the RTO through high-temperature thermal oxidation. Heat recovery through ceramic media helps reduce natural gas consumption. Main features • Manufacturer: Flow & Thermal Solutions / TECAM • Year: 2021 • Serial number: F002 • RTO nominal capacity: 18,000 Nm³/h • Configuration: three-chamber regenerative RTO • Fuel: natural gas • Honeywell / Eclipse TJ 200 burner • Burner output: 58–586 kW • Electrical supply: 400 V, 50 Hz • Electrical power stated on the nameplate: 40 kW • 30 kW Soler & Palau ATEX main fan • Siemens PLC automation with HMI touchscreen • LEL monitoring, purge, dilution, bypass and pneumatic valve systems • Vertical stack: 10 m high, diameter: 800 mm • CE marked Performance and operation The equipment operated at actual flow rates close to its nominal capacity, with recorded values ranging from approximately 16,400 to 17,900 Nm³/h. The latest available emissions test, carried out by DEKRA in December 2023, recorded the following values: • TOC: 13 mgC/Nm³ • NOx: 3–4 mg/Nm³ • CO: 125–153 mg/Nm³ During the tests, the equipment operated at an approximate temperature of 775–780 °C, with a treated water flow rate of 3.5 m³/h. Stripping columns The system includes: • Original stripping column, designed for approximately 6 m³/h. • Second Tecnium SLFKK9 stripping column, manufactured in PPH, with a nominal capacity of 8 m³/h and a maximum capacity of 10 m³/h. The second column was installed, but it is currently dismantled and lying on the ground after being knocked down by strong winds during the winter. It has a hole in the base which, according to the available information, is considered potentially repairable. The Tecnium column is equipped with internal packing, distributors, a mist eliminator, connections, drainage and provisions for integration with the existing control system. Condition and maintenance The system remained operational until the final closure of the plant in November 2025. The latest preventive maintenance was carried out by TECAM in June 2025 and included mechanical and electrical inspection, burner, fans, stripping columns, instrumentation, valves and functional testing. The equipment was operational, although maintenance work is required before recommissioning, mainly involving: • Process valves • Internal insulation of the towers • Ductwork and seals • Main fan impeller and expansion joints • Repair of the base of the second stripping column TECAM technical documentation is available regarding the recommended works, and several spare parts are also available. Scope of supply The system includes: • Three-chamber RTO • Combustion chamber • Burner and gas train • Main fan • Two stripping columns • Dilution and purge system • Hot bypass Fpsdpfozvcknex Aatsl • LEL analysers • Stack • Ductwork • Electrical cabinets and controls • Platforms, ladders and support structures • Available spare parts

Condition: defective spare-parts repository (used), Year of construction: 1993, machine/vehicle number: 208712, functionality: not functional, pressing force: 150 t, table length: 3,550 mm, oil tank capacity: 390 l, Folding press EHT EHPS 15-35 150 t | 3,550 mm | Year of manufacture 1993 | Cybelec DNC 880 | incl. tool package For sale is a robust hydraulic EHT folding press, type EHPS 15-35, manufactured in 1993. The folding press has a working length of 3,550 mm and a pressing force of 1,500 kN or approximately 150 t. It is equipped with a Cybelec DNC 880 control system. The scope of delivery includes a comprehensive package of upper and lower tools as well as special tools. Important note regarding the current condition: The machine can be started. However, an error appears during the initialization of the stops, which means that bending cannot be performed at the moment. The error needs to be bypassed or professionally repaired. After this error has been resolved, the machine should be operational again. Therefore, it is being sold explicitly as a used, repair-required industrial machine for restoration. The machine is in used condition, commensurate with its age. Signs of use, paint damage, and dirt are present; see pictures. Technical data: • Manufacturer: EHT Werkzeugmaschinen GmbH • Model / Type: EHPS 15-35 • Machine number: 208712 • Year of manufacture: 1993 • Pressing force: 1,500 kN / approx. 150 t • Working length: 3,550 mm • Control system: Cybelec DNC 880 • Oil quantity: 390 l • Power supply: 3~ • Frequency: 50 Hz • Operating voltage: 380 V • Control voltage: 220 / 24 V • Rated current: 50 A • Main fuse: 80 A • Electrical wiring diagram no.: 111002 Safety system: • System: Press safety system Starkstrom Gummersbach • Delay time: 66 ms • Delay distance: 9 mm • Safety distance: 105 mm Inspection / Collection: Fodpfozd Sc Ajx Aatepl The machine is located in an industrial hall and can be inspected by appointment. Dismantling, loading, and transport will be arranged or carried out by the buyer. Assistance with organization can be offered if required. Sales note: No guarantee, no warranty, no returns. Subject to prior sale and errors. All technical specifications have been compiled to the best of our knowledge based on the nameplates and available information.

Condition: used, Year of construction: 1996, functionality: fully functional, input voltage: 400 V, We are offering this used Johannsen wide belt sanding machine + additional sanding belt + dust collection container for sale. The machine nameplate is from the dust collection system, not from the sanding machine. Manufacturer: Johannsen Fpjdpjzzlvwsfx Aatjl Model: Wide belt sanding machine Year of manufacture: 1996 If you have any questions or require further information, please feel free to send us a message or call us.

Condition: used, Year of construction: 2015, functionality: fully functional, BAC VXC S455 evaporative condenser, 2015, R134a, s/n H150832701 — chiller heat rejection. Used 6 units Baltimore Aircoil International (BAC) VXC S455 evaporative condenser, built 2015, serial number H150832701. Made in Heist-op-den-Berg, Belgium. It is an evaporative condenser: hot refrigerant vapour enters the coils inside the unit, water is sprayed over the coil surface, and centrifugal fans draw air through the pack. The refrigerant condenses and returns to the refrigeration plant. No separate water-cooled condenser is required on the chiller. The unit has twin R134a heat-exchanger coils (circuits A and B) and a centrifugal fan section. It was installed on a rooftop as the heat-rejection side of a refrigeration / chilled-water plant. Fpodpfxszz Sids Aatjl Manufacturer: Baltimore Aircoil International nv Model: VXC S455 Serial number: H150832701 Year of manufacture: 2015 Type: induced-draft evaporative condenser Vessel type code: PED C100 Refrigerant: R134a Coil volume: 932 L per coil (A and B) Design pressure: −1 / 23 bar Test pressure: 34 bar Design temperature: −20 / +120 °C Fan overall efficiency (nameplate): 59.05% Marking: CE BAC catalogue figures for VXC S455 Base heat rejection: approx. 1,961 kW Operating weight: approx. 11,270 kg Shipping weight: approx. 8,125 kg Dimensions: approx. 5,385 × 2,397 × 4,248 mm Air flow: approx. 34.9 m³/s Fan motor: 1 × 30 kW Spray water: approx. 38.5 l/s, pump 1 × 4 kW Application Heat rejection for industrial chillers and refrigeration plants on R134a. A natural match for the Star Refrigeration package water chillers (contract 100663, 840 kg R134a charge): discharge gas goes to the BAC coils, liquid returns to the chiller. Condition and sale Used industrial equipment, removed / being removed from site. Price on request. Can be sold with the Star chillers or as a standalone condenser. Model, serial number and pressures are taken from the factory plates; actual capacity at the new site depends on condensing temperature and ambient wet bulb.

Year of construction: 2005, condition: used, functionality: unexamined, Two identical vacuum tube lifters from Schmalz, model JumboErgo 35, are for sale. Each unit includes a vacuum pump, control handle, hose package, and other accessories as shown in the pictures. These systems are suitable for the ergonomic lifting and moving of suitable wood panels, wood-based materials, and other flat components. The suitability depends on the material, surface, and the suction gripper used and must be checked before use. Technical specifications: Manufacturer: Schmalz Model: JumboErgo 35 Type designation: JUMBOERG35-DUMM Year of manufacture: 06/2005 Fpjdpfx Aaezyk R Rjtjl Maximum lifting capacity: 35 kg Weight according to nameplate: 60 kg Includes vacuum pump Includes control handle and hose package Two identical units available Scope of delivery as shown in the photos Condition The devices were purchased by us as part of an industrial auction but were not subsequently used in operation. A complete functional test has not yet been carried out. The sale is therefore made in the existing, used, and untested condition. Signs of wear and tear due to age and use are present. An inspection and testing on-site is possible after prior appointment and is expressly desired. Price Price per unit: €1,500.00 net, negotiable plus 19% VAT = €1,785.00 gross Package price for both units: €2,800.00 net, negotiable plus 19% VAT = €3,332.00 gross The sale is made by a commercial seller. An invoice with VAT will be issued. Location: 35110 Vöhl-Altenlotheim Collection and assistance with loading are possible by arrangement.

Condition: used, Year of construction: 1998, machine/vehicle number: SN: 5-2067, functionality: unexamined, power: 45 kW (61.18 HP), pressing force: 255 t, overall weight: 24,800 kg, PME Erfurt, Type: ZH 2500 / 1600, Serial No.: 5-2067, Year: 1998, 2500 kN, in operation until December 2025 Technical data of the press according to the nameplate: Press force: 2,500 kN Stroke rate: 25-75 strokes/min Rated stroke rate: 40 strokes/min Stroke: 20-200 mm Ram adjustment: 140 mm Total power: 45 kW Operating voltage: 400 V Frequency: 50 Hz Machine weight: 24,800 kg Strip feeding system consisting of: PBK, Type: Roller feeder WV-120/DSM 500P, Serial No.: BA00482, Year: 1998, PBK, Type: Straightening machine, Year: unknown, PBK, Type: Unwinding reel SCi 530 M, Serial No.: BA00482, Year: 1998 including enclosure and roller conveyor Fedozvcxlspfx Aatspl with peripherals: - Conveyor system Functionality and technical data have not been verified. without additional items/without further accessories, unless explicitly stated as part of the item. If interested, please contact us by email.

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, Manufacturer: SW – Schwäbische Werkzeugmaschinen GmbH Model: BAW06-22 Year of manufacture: 2018 Machine No.: 2080519 Control: Siemens SINUMERIK Machine type: CNC horizontal twin-spindle machining center Country of origin: Germany Technical Data Working travels: X-axis: 600 mm Y-axis: 600 mm Z-axis: approx. 400–500 mm* Number of machining spindles: 2 Spindle arrangement: horizontal, twin spindle Spindle distance: 600 mm Maximum spindle speed: 17,500 rpm Tool holder: HSK-A63 Spindle power: up to 2 x 35 kW* Spindle torque: up to 2 x 80 Nm* Fpsdszypmqjpfx Aatol Rapid traverse X/Y/Z: up to 100 m/min* Automatic tool changer: Yes Tool magazine: up to 84 positions / 2 x 42 tools* NC rotary/swivel workholding system Automatic workpiece changing/loading system Automation / Equipment Industrial robot for automatic loading and unloading Complete safety enclosure Automatic workpiece handling system NC-controlled rotary/swivel workholding Twin-spindle simultaneous machining Automatic tool changer KNOLL coolant filtration system High-pressure coolant system Chip evacuation system Central coolant supply Siemens operator panel CE marking Electrical Data Operating voltage: 3/PE / 400 V / 50 Hz Full-load current: 190 A Pre-fuse: 200 A Pneumatic pressure: 7.0 bar Air consumption: 1.0 Nm³/min Electrical diagram No.: 205-000-20678-97 Weight Machine weight: approx. 16,000 kg Nameplate specification: 160 kN Description SW BAW06-22 CNC horizontal twin-spindle machining center, manufactured in 2018. The machine is designed for highly productive simultaneous machining with two horizontal machining spindles. Equipped with Siemens SINUMERIK CNC control, HSK-A63 spindle interface, high-speed spindles up to 17,500 rpm, automatic tool changing system and NC-controlled rotary/swivel workholding. The machine is integrated into an automated production cell with industrial robot for automatic workpiece loading and unloading. The machine is additionally equipped with a KNOLL coolant filtration system, high-pressure coolant supply, chip management system and complete safety guarding. Made in Germany.

Condition: like new (used), Year of construction: 2020, functionality: fully functional, tank capacity: 5,000 l, usable tank capacity: 5,000 l, total height: 3,225 mm, outer diameter: 1,756 mm, overall weight: 1,640 kg, wall material: stainless steel, wall thickness: 8 mm, wall structure: single-walled, manhole diameter: 610 mm, manhole location: top, operating temperature: 100 °C, negative pressure: 1,00,000 Pa, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, Equipment: CE marking, sanitary facilities, Brand new, never commissioned. Professionally decommissioned from an INEOS manufacturing facility prior to first use. Fsdpfx Ajzhnlzoatjpl Manufactured by Able Engineering, this high-specification sanitary 316L stainless steel agitated pressure vessel is suitable for pharmaceutical, cosmetics, personal care, food, beverage and fine chemical applications. Designed for vacuum and low-pressure service and suitable for installation within ATEX-rated environments. Constructed entirely in 316L stainless steel throughout with 8mm shell and dish walls, dished top and bottom heads, heavy duty tubular stainless steel leg supports with bolt-down base plates and load cell arrangement, hygienic internal finish < 0.8 Ra, and full hygienic ferrule fittings throughout conforming to ASME BPE / BS3062. Suitable for CIP. Material: 316L Stainless Steel throughout. Working Volume: 5,000 Litres. Shell ID: 1,740mm. Overall Height: 3,225mm. Shell & Dish Wall Thickness: 8mm. Design Pressure: -1.0 to +0.45 Bar.G. Design Temperature: -10°C to +100°C. Empty Weight: 1,640kg. Design Code: PD5500:2018, Cat.3. PED 2014/68/EU certified. Manufacturer: Able Engineering. Serial Numbers: PXL19635-1, PXL19635-2, PXL19635-3. Factory Tested: September 2020. Fitted with SEW-Eurodrive geared agitator with double mechanical seal, seal pressure pot, and reinforced agitator mounting. Nozzles and fittings include 610mm hinged manway, CIP inlet with dip pipe and TOD clip-on spray fitting, pressure relief valve connection, nitrogen blanketing connection with pressure indicator, Endress & Hauser hygienic thermowell, dual flush polished level switches, load cell arrangement on support legs, lifting lugs, and earthing boss. Three units currently available, all brand new and never commissioned, sourced directly from the same INEOS facility. Tank saddles available on request for either single use or purchase. Please view our other listings for additional sizes and configurations — all stock is brand new, ex-INEOS, and available for immediate inspection and purchase. Original engineering drawings and full nameplate documentation available on request. Inspection welcome by appointment. Loading and transport can be arranged. Tracht Ltd specialise in hygienic process equipment for the food, beverage, cosmetics, pharmaceutical and chemical industries, with practical experience supporting both batch and continuous manufacturing environments. In addition to process vessels, Tracht Ltd supply and install stainless steel mixing vessels, Silverson high-shear mixers, hygienic lobe pumps, hygienic centrifugal pumps, access gantries, and provide full vessel installation and commissioning services. Whether replacing existing equipment or expanding production capacity, Tracht Ltd can specify, supply and install the right equipment for your application. Please contact us for further information or to discuss delivery and installation options.

Year of construction: 1999, condition: defective spare-parts repository (used), functionality: limited functionality, machine/vehicle number: T4-0899, Excel-Csepel DFS 380 lathe (T-400/600) with Sinumerik 810D/CNCkon, year of manufacture 1999 – machine for hobbyists Condition: operational, but for sale only as a hobbyist/repair machine – no guarantee of continuous functionality Fpodpfx Aaozw Ea Istol Year of manufacture: 1999 Location: Western Saxony Price: negotiable Technical data: Manufacturer: Excel Csepel Machine Tools Ltd. (Hungary) Type: DFS 380, nameplate designation T-400/600 Machine No.: T4-0899 Control: Siemens Sinumerik 810D with CNCkon Total connected load: 30 kW Connection values: 3×400 V / 50 Hz, control voltage 230 V AC / 24 V DC Max. turning diameter over bed: 535 mm / over slide: 380 mm Travel X: 230 mm, Z: 1,115 mm Main spindle drive: 18.5 kW (100% duty cycle), speed 35–3,500 rpm Spindle head A8 according to DIN 55026, spindle bore 82 mm, max. bar diameter 70 mm Feed axes: FANUC AC servo motors, rapid traverse X 15 m/min, Z 20 m/min Turret: TOEM 200 „06“, 12 tool positions, tool holder DIN 69880, Ø 40 mm Tailstock: hydraulic, stroke 150 mm, internal taper MK4 Weight: approx. 8,300 kg, dimensions L×W×H: 3,690 × 1,750 × 1,900 mm Condition/Special features (technical honesty): The machine is fundamentally operational and, thanks to the integrated correction electronics (CNCkon), is in principle very accurate. However, this accuracy is impaired by existing spindle play (approx. 2–3 hundredths of a mm). The machine is therefore primarily suitable for experienced buyers who are willing to repair or rework the spindle play themselves. Therefore, it is explicitly sold as a hobbyist/self-repair machine, without any assurance of permanent production suitability. Description: For sale is an Excel-Csepel DFS 380 lathe (nameplate T-400/600), year of manufacture 1999, with Siemens Sinumerik 810D control and CNCkon correction electronics. The machine is functional and runs, but has a spindle play of approx. 2–3 hundredths of a mm, which limits the achievable accuracy. Suitable for technically skilled buyers or as a hobbyist/spare parts machine. Further technical data see above. Inspection at the location in Western Saxony possible by arrangement. Sold without guarantee and warranty, negotiable. Other machines available from site clearance Site takeover negotiable