Used Hot Glue Gun for sale (16,545)

Condition: excellent (used), functionality: fully functional, Segment I – Unwinder with stabilizing table Iodpfx Ajwck U Redwoal The first segment is responsible for stable guidance of the material web. It is equipped with pins enabling both lamination and delamination of the face with liner or other raw material. It has a laminator with the possibility of precise pressure adjustment. In addition: • The hanging mechanism in each segment allows for continuous operation, eliminating the need to stop the machine while the flat die is working. • Leading (pulling) servomotors ensure precise control of the material, also located in the station. Segment II – Central (Die) The heart of the machine is the flat die, allowing for cutting and embossing. It has been equipped with: • Hot stamping system – thanks to the heated plate with a mounted matrix, it allows for the application of effective decorations. • Upper foil unwinders enabling additional material processing. • Manual pressure adjustment – four independent clocks provide full control over the process, which is particularly important for irregular matrices and unconventional work. • Lower trolley as an alternative to the hanging system – used depending on the specifics of the work. Segment III – Puncher The third segment is responsible for separating cut labels and transporting them to the receiving tray. • Puncher – precise separation of single labels. • Two laminators – one on each side of the puncher, with adjustable pressure. • Unwinders and winders ensuring smooth guidance of additional raw material. Segment IV – Rewinder The last segment is responsible for the final winding of the finished material. Equipped with: • Two mandrels – enabling simultaneous or alternate winding of the finished product. • Web tensioning system (nip holding and web tensioning) – ensuring stable guidance of the material. • Slitting disc knife station. • Whisk (waste) extraction system. • Web sensors placed under each overhang, ensuring optimal process control. Additional functionalities • Remote control – the machine can be operated via the tablet included in the set. • Mark sensor system (register) – precisely matches previously printed raw material, ensuring high accuracy and repeatability of production.

Condition: refurbished (used), Year of construction: 1991, Components of an asphalt mixing plant TELTOMAT mixing material silo with bucket elevator Screen and drying drum 2-shaft compulsory mixer 30,000 L heating oil tank AMECO filter system Bitumen tanks Silos with screw conveyor Ijdpfstph A Nox Adwjal

Condition: excellent (used), functionality: fully functional, Brief description Table dimensions: 3000 mm x 1300 mm Number of cylinders: 6 Pressing force: 90 tons Ijdoxvx Ezopfx Adwjal Table opening: 400 mm Heating with hot water Boiler: 20,000 kcal/h

Condition: excellent (used), Year of construction: 2007, Twin drum spiral hot air oven direct from closed McD factory, this was used for pre-cooking burgers and nuggets. These machines are built for the high capacity cooking, grilling and steaming of a wide range of products, the degree of cooking, grilling or steaming is determined by the air temperature, the air speed, the air humidity and the time that the product is in the system. Iaodpfx Adsx Altfowol Electrically heated. 96m x 600mm belt. Was in use from 2007 until 2016 when the contract moved to another factory. Machine is in lovely condition, we also have everything else used in the factory - formers, fryers, coating machines, filters, spiral freezers, bagging lines etc. Please note that the photos probably show two different ovens, both are very similar.

Condition: used, Year of construction: 2019, Insulated, upright stainless steel tank with heating jacket (+temperature control) and pressure booster pump (3 m³/h at 3 bar). The tank is also equipped with a drain pipe, level indicator and pressure gauge. Additional title: vertical, insulated, heatable stainless steel tank Gross volume: 2000 l Height: 2100 mm Material: Stainless steel 1.4404 (AISI 316 L) with insulating cladding made of 1.4301 (AISI 304) Base construction: standing on 4 feet Features: Insulation (insulation thickness 50 mm); heating jacket; temperature control; pressure booster pump (Grundfos); outlet pipe; hose level indicator; pressure gauge Iaedpfx Adsxwy Aqewol

Condition: excellent (used), functionality: fully functional, Operating system Windows 14 zones Iasdpfx Adoxb A H Hswol

Condition: as good as new (ex-display), Year of construction: 2021, operating hours: 50 h, functionality: fully functional, machine/vehicle number: 000247, GLUE MACHINE FOR SINGLE-COMPONENT POLYURETHANE ADHESIVE. SPECIAL FOR GLUING LAMELLAS OF LAMINATED BEAMS • Maximum gluing width: 300 mm • Gluing head divided into 3 combs, each 100 mm and controlled by solenoid valve • Glue cord pitch: 10 mm • Tray with non-stick liquid that automatically closes the combs when the machine does not dose Iasdpfx Adet Nfarewsl • Glue dosage: 100 to 200 gr/m2, as determined • Gear metering pump • Glue viscosity range: 10.000 to 30.000 mPas • Drag speed: 7 to 15 m/min • Support for 200 l barrel • PLC control, with touch screen. KINCO brand • Machine from the GLUESTREAM company • CE rules • Machine manufactured in 2021 and assembled in May 2022. Like new, it has worked less than 50 hours WE ALSO HAVE THE HYDRAULIC PRESS TO MAKE GLULAM BEAMS, ALMOST NEW MACHINE

Condition: excellent (used), functionality: fully functional, Eloma Backmaster EB 30 T Deck Oven Double Station TOP convection table-top oven for 3 baking trays with extraction hood on top stainless steel construction only with us: DGUV V3 tested 2 x 230V connections Dimensions: 600 x 700 x 1220 mm (WxDxH) Used unit with warranty & spare parts service Quality from a certified workshop & service partner! Benefit from over 35 years of experience! Options: Baking trays Iasdpjxxgmrsfx Adwel Water filter Base frame Maintenance contract Delivery service E-Box for enhanced safety Service package Training & commissioning Many more ovens in stock!

Condition: excellent (used), Year of construction: 2018, Roller glue spreader OSAM S2R-1300 + disc table OSMA TDM Working width: 1300 mm Maximum working height: 100 mm Manual adjustment of working height 2 glue rollers (top and bottom) Disc table OSAMA TDM 1300-3000 Iajdpoxrdv Dsfx Adwel CE marking Year of manufacture of the set: 2018

Condition: new, Year of construction: 2024, Osama Automatic 4-Roller Glue Application Machine Model: S4R/P-1400 Ijdju I R Utspfx Adwsal Automatic gluing machine with 2 motors Working width: 1,400 mm Max. pass-through height: 0 - 100 mm Speed: 22 m/min Working height: 900 mm Diameter of application rollers: 250 mm Motor power: 3 kW Electrical: 400 V / 50 Hz / 3 phase Automatic gluing machine with 4 rollers for polyvinyl acetate (PVAC), urea-formaldehyde (UF), and polyurethane adhesives, suitable for various materials such as MDF, multi-layer boards, particle boards, composites, and gypsum plasterboard. This type of gluing machine allows for precise and homogeneous dosing of adhesive, taking into account the corrugation of the rollers, which must be suitable for the respective production requirements. The heavy-duty structure and the roller cores, manufactured with greater thickness compared to earlier models, enable a high production rate without issues and bonding of materials up to 2200 mm in width. Roller removal for maintenance is straightforward, as the supports can be split in two via a simple bayonet coupling. The gluing machine can also be equipped with different accessories, such as an electronic speed controller, automatic roller washing device, and an automatic upper roller lifting mechanism with position display on the control panel. The S4R/P gluing machine is used in various production sectors, including construction and the manufacturing of foam panels and mattresses. Equipment: - Automatic roller cleaning - Infeed roller - Outfeed roller - Working height: 900 mm - Infeed table TRF 1400x3000 mm with PVC rollers, 60 mm diameter, 200 mm spacing - Outfeed table TDF 1400x3000 mm with disc rollers, D: 122 mm, stainless steel Location: in stock at 54634 Bitburg - Available immediately -

Year of construction: 2013, condition: good (used), functionality: fully functional, machine/vehicle number: NA007/2013, Bicker Glue Jet – Industrial Gluing System A machine designed for the production of packaging, advertising materials, and displays. Easy to install and operate, suitable for both small and medium-scale production. The unit is in very good working condition. Working area: Width – 1700 mm, Length – 2500 mm 4 fully independent stations Hot glue line, cold glue line, and spray systems Ijdpfxexqn A Eo Adwoal

Condition: new, Year of construction: 2025, closing pressure 240 kN clamping plate 380x380 mm distance between columns 250x250 mm weight of the machine ca. 3,0 t lock stroke 180 mm capacity of ejector 28 kN ejector stroke 50 mm height of form 120-300 mm column diameter 45 mm casting capacity 43 kN casting plunger stroke 85 m/m injection plunger diameter 36,40,45 mm casting volume (DIN 24480) 47,63,87 cm ³ volume cast pressure 420,340,270 da/cm² casting area 56,70,88 cm 2 Traverse Stroke 150 m/m Equipment of the machine 1.0.2 Cover for drop through area at the subframe with scale/chute 1.0.3 Cover for small parts in the subframe 1.1.0 Motorized guard in casting direction left Iasdox Hp E Ajpfx Adwsl 1.4.0 Machine positioning mounting pads 1.5.4 Machine interior illumination 1.11.0 Convenience package energy efficiency 2.0.1.2 Ejector function package "Technology" including SensiEject 2.6.4 Machine assistance system SensiLock 2.8.0 Hydraulic adjustment of locking unit for shot positioning 3.0.1.2 Casting assistance package Technology including SensiInject 3.2.9 EcoMelTec multi-chamber furnace with pump (surcharge) 3.4.4 Prefilling process 3.4.5 Simplified piston removal 3.4.6 Piston stop during return stroke 3.5.2 Electric nozzle and gooseneck heating (extended version) 3.5.3 Plug-in connections for electric nozzle and gooseneck heating 4.5.0 Shut-off facility for hydraulic locking and injection unit 4.6.1.2 Integrated water circuit 2+4 circuits 5.1.0 Machine control DATADIALOG - Realtime Control (RC) 5.1.5 Maintenance plus package 5.6.0 Special cable lengths 6.1.3.1 Wired signal interface for extraction device (DISPO 010) 6.1.4 Serial interface for 4 heating-cooling circuits ROBAMAT 3.1 6.1.5 Interface for Vacuum unit 6.3.1.1 Hanging operating desk with monitor 6.5.2 Service Package RSD with Switch for each additional machine 7.2.1.2 Spraymotion 411 E with servo drive 7.2.10 Extended spraying program for spraymotion 7.3.1 Lubricant container TD 20 7.4.0.1 Spray rail CR 155

Condition: ready for operation (used), External dimensions: 2500 × 1300 mm Stepless feed speed adjustment Year of manufacture: 2017 Iedpsxcwr Hsfx Adweal Motor power: 0.75 kW

Condition: new, Galen Hot Slag buckets are made of Hardox HiTemp material, special adapters, teeth and welding wire. Hot slag can reach temperatures of approximately 750 °C so extend durability with Galen bucket Iaodpfx Adstn Dh Eewel

Condition: new, Year of construction: 2026, Efficient gluing in cabinetry in dowel holes and back side grooves as well as gluing at frame-, window- and door-constructions of dowel holes and mortise and tenon joints. Short introduction: • Universal glue applicator • Timesaving - Easy - Clean • Different nozzles and attachments available • Moveable Universal application: Iedpfx Adehnddzewoal • Gluing of dowel holes • Gluing of back side grooves • Gluing of edge surfaces • Gluing of surfaces in gerneral • Gluing of mortise and tenon • Gluing of parts at cabinets, case goos, drawers • Gluing of parts at frames • Gluing of parts at windows and doors • Processing of panel and solid wood componets

Condition: excellent (used), For Sale: Hot-Air Sterilizer / Dryer Chirana HS 62A I am offering a fully functional Chirana HS 62A hot-air sterilizer for sale. The device is suitable for drying, sterilizing, or performing thermal tests on various materials. It is a robust laboratory unit made in former Czechoslovakia, known for its reliability and simple operation. Technical details: Model: Chirana HS 62A Metal double-wall chamber construction Precise temperature control Suitable for laboratories, production facilities, service workshops, and technical operations Condition: The device is in very good technical condition and ready for immediate use. Isdpexz Ah Defx Adwoal Price: 300 EUR Location: Ivanka pri Nitre

Condition: excellent (used), Here we offer you RIVSET self-pierce rivet system. with punch rivet pliers 9524-640-826-7 operating voltage: 400V 50 Hz rated current: 13A Main fuse: 20 A Control voltage: 24 V Signal voltage: 10 V Year of manufacture: 2011 with Hydac cooling unit OK-EL2S/3.0/M/400-50/1 max. permissible rivet setting pressure: 250 bar max. permissible rivet setting force: 78 kN Iasdpjpfcx Iofx Adwel weight of the tongs: approx. 195 kg type: 9524-640-826-7 The system was for inspection at the manufacturer and is functional. Condition: used / used Scope of delivery: (See picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: ready for operation (used), External dimensions: 2500 × 1300 mm Stepless feed speed adjustment Iajdpfxjxcw Afj Adwsl Year of manufacture: 2017 Motor power: 0.75 kW

Condition: new, Year of construction: 2026, CNC drill and dowel inserting machine for fully automatic bore, glue and dowel driving. The drill glue and dowel machining center with compactness, efficiency, quality and flexibility. Iaedpfx Aodx R Dfodwsl Short introduction: • Universal CNC controlled drilling and dowel inserting machine • Glue shot monitoring via GIC • Closed gluing system • Suitable for panel and solid wood processing • Optional additional horizontal and vertical drilling spindles • Relieves CNC machining centers • Optimal complement to nesting machines

Condition: excellent (used), Tucker Nimak MF180: Robot welding guns for single-sided resistance spot welding The robotic welding guns for single-sided resistance spot welding from NIMAK work with state-of-the-art medium-frequency transformers, a control unit with adaptive welding current control and finely adjustable welding cylinders for gentle power. Iasdpfxsrqfk Ae Adwol The right amount is needed to reliably join materials without deforming them or leaving marks on the visible side. or leaving marks on the visible side. Our systems master this task perfectly. Tucker Stanley C-clamp self-pierce riveting tool With Tucker® SPR equipment, you can join materials that cannot be easily welded, including aluminum-aluminum, aluminum-steel and high-strength steel, by combining two technologies in one modular system: Self-pierce riveting with semi-tubular rivets and solid self-pierce riveting. AEG SVS Schweisstechnik Electrode milling unit EF310-01E-S-D-Fix Milling of spot welding electrodes Automatic rivet feed With controller: The brain of every SPR system. It manages, thinks, remembers and communicates in an Industry 4.0 environment The lung - Small, quiet and fast rivet feeder for your SPR tool. Condition: used / second-hand Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have over the phone.

Condition: new, Year of construction: 2026, CNC drill and dowel inserting machine for fully automatic bore, glue and dowel driving. The drill glue and dowel machining center with compactness, efficiency, quality and flexibility. Short introduction: Isdedx Axfspfx Adwoal • Universal CNC controlled drilling and dowel inserting machine • Glue shot monitoring via GIC • Closed gluing system • Suitable for panel and solid wood processing • Optional additional horizontal and vertical drilling spindles • Relieves CNC machining centers • Optimal complement to nesting machines

Condition: excellent (used), Binder Iaederp Enbspfx Adwel Type: Binder CB 210 CO² / 9140-0013 Technical data Temperature range 7 °C above room temperature to 60 °C MB1 controller for temperature and CO2 concentration Interior volume: 210 liters External dimensions (W x H x D): 740 x 1069 x 715 mm Internal dimensions (W x H x D): 560 x 750 x 500 mm Weight: approx. 121 kg Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: new, Year of construction: 2026, For professional and precise glue supply in dowel holes and back side grooves. Short introduction: Iasdpfedxz Tpox Adwel • Always the same and right glue amount • No afterwards cleaning of the workpieces of too much glue is necessary • Easiest and minimal cleaning (1x week) of the gluing system (through cleaning program) • Glue cost savings • Ergonomic and light glue gun compared to squeezy glue bottles • Faster and more precise working compared to squeezy glue bottles

Condition: excellent (used), Heraeus drying cabinet hot air sterilizer Here we offer a Heraeus drying cabinet hot air sterilizer. Manufacturer / Type: Heraeus SUT 6060 Features: Temperature range: 250 °C Net volume: 52 litres Weight (empty): 53 kg Internal dimensions: depth 339 mm, width 403 mm, height 380 mm External dimensions: Depth 535 mm, width 744 mm, height 552 mm Rated voltage 230V, rated frequency 50/60Hz, rated current 7.1 A, rated power 1.64 kW Type: SUT 6060 Condition: used / used Scope of delivery: (see picture) Ijdpfog Airfsx Adwoal (Changes and errors in technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: new, Year of construction: 2026, Multi-spindle thrufeed bore and dowel insertion machine in the of System 32 mm through multi spindle drillhead and adjustable doweling stations. Short introduction: • Double sided boring and dowel inserter with a workpiece return transport system Iedodx Axkopfx Adwoal • Small footprint requirement for a multi-spindle thrufeed dowel insertion machine • Optional, additional vertical drilling units • Closed gluing system • Double sided drill glue dowel machine for high capacity