Used Hsc for sale (166)

Condition: refurbished (used), Year of construction: 2016, operating hours: 3,162 h, load capacity: 1,400 kg, lifting height: 7,700 mm, fuel type: electric, construction height: 3,100 mm, Friedmann Forklifts – Remade for Action Used industrial trucks from select premium manufacturers, comprehensively serviced, tested, and expertly refurbished by us according to FEM-4.004 (UVV) standards. Custom modifications of any kind available upon customer request. International transport with suitable vehicles and customs clearance available upon request. See for yourself and visit us at our facility. Friedmann Forklifts – Quality Commitment - Full functionality as per FEM-4.004 - Inspected & tested battery (C5 test) for electric units (at least 70% capacity) - Usable tires meeting FEM-4.004 requirements (minimum 70% tread depth) - Mast, fork carriage, attachments, and hydraulic system inspected - Steering axle safety checked - Forks and lift chains with a maximum wear limit of 40% - As-new driver’s seat and seat belt - New paintwork in original colors with original decals Industrial Truck Specifications - Manufacturer: Jungheinrich - Model: ETV 214 – Reach Truck - Drive type: Electric - Load capacity: 1,400 kg - Lift height: 7,700 mm - Load center: 600 mm - Year of manufacture: 2016 - Operating hours: 5,536 - Serial number: 91106310 - Mast type: Triplex - Fork length: 1,150 mm - Overall height: 3,100 mm - Own weight: 3,500 kg incl. battery Battery & Charger - Battery voltage: 48 V Nwjdpfx Absy Rm Tfs Ujl - Battery maintenance: 03/2024 - C5 capacity test: minimum 70% - Charger voltage: 48 V (available upon request) Attachments & Special Equipment - Attachments: Side shifter - Special equipment: - Front tires: 0 x / Polyurethane / - Rear tires: 0 x / Polyurethane /

Condition: good (used), Year of construction: 2004, operating hours: 19,000 h, functionality: fully functional, feed length X-axis: 800 mm, feed length Y-axis: 800 mm, feed length Z-axis: 500 mm, travel distance X-axis: 1,200 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 500 mm, feed rate X-axis: 50 m/min, feed rate Y-axis: 50 m/min, feed rate Z-axis: 50 m/min, spindle speed (max.): 42,000 rpm, spindle speed (min.): 50 rpm, overall weight: 12,500 kg, input voltage: 400 V, input frequency: 50 Hz, Equipment: documentation/manual, rotational speed infinitely variable, HSC800 – 5 axes Control: Heidenhain iTNC530i Travel range (X/Y/Z): 800x800x500 mm Spindle speed: 42,000 rpm Spindle taper: HSK50 Operating voltage: 3x400V, 50Hz Power requirement: 35 kW Compressed air: 8 bar AC motors Digital control Feed rate: 2 to 60 m/min Rotary table clamping surface, diameter: 400 mm Portal clearance width: 1050 mm Height: 650 mm External cooling unit Handheld control panel with handwheel Tool changer with 54 positions Nedpsyciqcjfx Ab Ujwl

Condition: used, functionality: fully functional, machine/vehicle number: FN 53xxxx, Year of construction: 2017, operating hours: 6,408 h, load capacity: 2,500 kg, lifting height: 3,500 mm, free lift: 150 mm, fuel type: gas, mast type: simplex, construction height: 2,421 mm, power: 38 kW (51.67 HP), fork length: 1,200 mm, empty load weight: 3,813 kg, total length: 2,613 mm, drive type: Treibgas, construction width: 1,184 mm, LPG Forklift Nwodpfx Ajx Ixqdob Uel Chassis number: FN 53xxxx Load center: 500 ISO class: ISO class 2 = 1,000 - 2,500 kg Mast type: Standard Transmission: Hydrostatic, manual reversing Condition: Refurbished without warranty Technical condition: Very good Front tire type: Super elastic Front tire size: SE 7.00-12 Rear tire type: Super elastic Rear tire size: SE 6.50-10 Description: serviced, technically and visually reconditioned, UVV tested, without guarantee/warranty for defects Side shifter, Attached (new) 3rd valve, rear work light, front work light, roof cover, Lighting similar to StVZO (not road-legal), solo-pilot controls, 1200 mm forks (new), floor protection front and rear, flashing beacon

Condition: used, functionality: fully functional, machine/vehicle number: FN 54xxxx, Year of construction: 2017, operating hours: 5,880 h, load capacity: 3,000 kg, lifting height: 3,500 mm, free lift: 100 mm, fuel type: gas, mast type: simplex, construction height: 2,425 mm, power: 38 kW (51.67 HP), fork length: 1,200 mm, empty load weight: 4,501 kg, total length: 2,723 mm, drive type: Treibgas, construction width: 1,320 mm, LPG forklift Chassis number: FN 54xxxx Load center: 500 ISO class: ISO class 3 = 2,500 - 4,999 kg Mast type: Standard Transmission: Hydrostat manual shift Condition: Reconditioned without warranty Technical condition: Very good Front tires Type: Superelastic Front tires size: SE 27x10-12 Rear tires Type: Superelastic Njdeu D R Nvjpfx Ab Ujwl Rear tires size: SE 6.50-10 Description: serviced, technically and optically refurbished, UVV-approved, without warranty/liability for material defects Sideshifter, attached 3rd valve, 4th valve, rear working lights, front working lights, roof cover, safety light, Hydrostat with manual changeover, 1200 mm forks (new), lighting similar to STVZO (no road approval), flashing light, quick couplings 3rd + 4th function on fork carriage, panoramic mirror, Solo-Pilot

Condition: used, functionality: unexamined, Ferwood code: RU0011722 - Manufacturer code: ESMA04U301 - Condition: Used - Functionality: Not tested - Compatible machine: - If interested, we offer an overhaul service, please contact us. 1KG 20X20X20 Nodjylayyspfx Ab Uswl

Condition: used, Year of construction: 2020, Used extraction system, also suitable for high-alloy metals The system comes from a reputable industrial company and is being sold due to a relocation. Additional accessories, such as extraction arms, etc., are not included; it was connected to a robotic welding cell. The price is for self-dismantling; dismantling can also be offered for an additional charge. Manufacturer: KEMPER Model series: WeldFil Compact Nodpez Apkzefx Ab Ujwl Type: 3440502 / 34 40 502 Year of manufacture: 01/2020 Design: Outdoor Control: Siemens Sinumerik, touchscreen FILTER SYSTEM Filter stages: 1 Dust class: M W3 approval according to EN ISO 15012-1 W3 separation rate: ≥ 99% Suitable for welding fumes from high-alloy metals PERFORMANCE DATA Extraction capacity: 2,750–3,960 m³/h Negative pressure: 2,050–2,700 Pa Motor power: 4 kW CONTROL / EQUIPMENT Demand-controlled extraction capacity Automatic, continuous regulation of fan output Constant extraction capacity at the workstations Siemens Simatic system control External terminal with touchscreen display PIPING / ACCESSORIES SparkTRAP pre-separator NW 355 For almost complete separation of sparks and glowing particles before the filter system With dust collection container Equipment for optional intake/exhaust operation: 2-way distributor Ø 355 mm KEMPER dosing unit for extraction and filter systems System 8000/9000 Automatic dosing of the filter aid depending on operating hours or cleaning cycles via SparkTRAP for protection against sparks and filter fires

Condition: used, Touchscreen, keyboard, mouse For sale: operator panel removed from a Finn-Power L6A CO2 laser. Touchscreen, keyboard, mouse. Manufacturer: BECKHOFF Manufacturer’s code: CP6802-1007-0010 / 387162-010 Touch screen: Siemens / 1P 6FC5203-0AC00-1AA0 / SINUMERIK 840 D CNC KEYBOARD (AT) OP032S Price: 1000 EUR. Nsdjy Tt R Aspfx Ab Ujwl If you have any further questions, we will be happy to answer them.

Year of construction: 2013, condition: good (used), Computer monitor, screen, TFT industrial monitor, flat screen, industrial monitor touchscreen -Manufacturer: Pro-face, industrial monitor flat screen touchscreen -Type: FP3710-T42-U -Article No.: PFXFP3710T2AU Nedpfx Abeuh H Efe Uswl -Model: 3580406-01 -Dimensions: 475/120/390mm -Weight: 10.4 kg

Condition: good (used), Year of construction: 1984, functionality: fully functional, Table size 2000 x 650 mm Table longitudinal travel 2000 mm Stone transverse travel 650 mm Max. working height 550 mm Stone scraper integrated in the head Machine weight approx. 15,500 kg Dimensions (L x W x H) = 6000 x 2400 x 2900 mm Accessories Nwjdpjyr Iqmefx Ab Usl - Magnetic table - Built-in dresser unit - Wheel with flange - Hydraulic unit - Separate control cabinet Good condition. The machine will be sold due to company liquidation.

Condition: good (used), functionality: fully functional, A good used Proface HMI Industrial PC - Model SP-5700TP fitted with SP-5B40 Open Box Module Ready to Ship Worldwide Nwjdpfx Aewmfbtjb Usl Please contact us via whats app for more pictures videos and chat

Condition: ready for operation (used), Year of construction: 2004, operating hours: 11,298 h, functionality: fully functional, machine/vehicle number: 665001, travel distance X-axis: 700 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 450 mm, workpiece weight (max.): 2,000 kg, spindle speed (max.): 42,000 rpm, number of slots in tool magazine: 40, No minimum price – guaranteed sale to the highest bidder! Submitting a bid obligates you to collect the item within the period of September 21st to October 1st! TECHNICAL DETAILS Travel in X-axis: 700 mm Travel in Y-axis: 550 mm Travel in Z-axis: 450 mm Feed Axes Max. travel speed X, Y, and Z axes: 30 m/min Max. acceleration X, Y, and Z axes: 15 m/s² Positional accuracy TP according to DIN ISO 230-2: 0.005 mm Nwjdez Aplljpfx Ab Ujl Repeatability: 0.002 mm Work Table Table length: 850 mm Table width: 700 mm Number of T-slots: 5 T-slot dimensions: 18 H12 Table load: 2,000 kg Max. workpiece weight: 2,000 kg Distance spindle center – table: 550 mm Spindle Spindle mount: HSK-E 40 Spindle speed: 3,000 - 42,000 rpm Spindle power: 17 kW Tool Changer Tool magazine positions: 40 MACHINE DETAILS Machine type: CNC HSC machining center CNC control: Andronic Electrical Connection Data Supply voltage: 400 V Supply frequency: 50 Hz Fuse rating: 32 A (?) Dimensions and Weight Overall length: 3,300 mm Overall width: 2,300 mm Overall height: 2,300 mm Overall weight: 7,700 kg Operating Data Machine operating time: 275 d 5 h 13 min 39 s Spindle operating time: 11,297 h 20 min 11 s EQUIPMENT - Full enclosure - Dust and fluid-proof guides - Oil mist extraction - Compressor cooler - Frequency inverter - Heidenhain glass scales in X, Y, and Z axes - Work light in the interior - Technical documentation - Workbench - HSK-E-40 tool holders - Tools - Workbench dimensions: approx. 1,500 × 900 × 1,100 mm External Reference: Demo - Lot 2

Condition: excellent (used), Year of construction: 2015, operating hours: 9,500 h, functionality: fully functional, travel distance X-axis: 1,020 mm, travel distance Y-axis: 830 mm, travel distance Z-axis: 240 mm, feed rate X-axis: 30 m/min, feed rate Y-axis: 30 m/min, feed rate Z-axis: 30 m/min, total length: 2,080 mm, total width: 1,990 mm, spindle speed (min.): 1,000 rpm, spindle speed (max.): 40,000 rpm, total height: 2,000 mm, rapid traverse X-axis: 44 m/min, rapid traverse Y-axis: 44 m/min, rapid traverse Z-axis: 44 m/min, overall weight: 2,100 kg, spindle motor power: 3,000 W, We are selling our Datron M10 Pro with HSC control. The machine is in excellent condition, still in use, and can therefore be inspected while powered on. We are gradually replacing our machine park, which is why we are offering this machine for sale. It has seen very little use, as it was primarily used to machine brass with a cutter diameter of 3mm. Maintenance has been carried out at regular intervals. The spindle is 2 years old and has only 1,500 hours of operation. Nwodsz Epwkspfx Ab Usl Delivery terms: ex works, transport insurance only, no warranty. Subject to errors in the technical data.

Condition: used, Year of construction: 2013, Milling machines Travel distance X: 533 mm Travel distance Y :406 mm Nwsdpfx Aezx T I Nsb Ujl Travel distance Z: 483 mm HSC-machines Number of axis: 5 milling machine / machining center Control: Hurco WinMax 9 spindle chuck: BT30 spindle revolutions: 30000 rpm Speed range to: 30000 U/min tool changer: 20 - time spindle cooling chip conveyor Manufacturer: HURCO Model: VM 10 UHSi Year of manufacture: 2013 Control: HURCO WinMax 9 Number of axes: 5 X-axis travel: 533 mm Y-axis travel: 406 mm Z-axis travel: 483 mm Spindle speed: up to 30,000 rpm Spindle taper: BT30 Tool changer: 20 positions Equipment: 5-axis machining HSC (High-Speed Cutting) Tool changer Spindle cooling Chip conveyor Tool/workpiece probe Renishaw touch probe The machine is particularly suitable for precise and demanding milling operations as well as applications requiring high spindle speeds.

Condition: ready for operation (used), Year of construction: 2014, operating hours: 13,000 h, functionality: fully functional, travel distance X-axis: 750 mm, travel distance Y-axis: 500 mm, total height: 2,700 mm, total length: 3,800 mm, total width: 2,350 mm, table width: 500 mm, table length: 750 mm, overall weight: 9,500 kg, spindle speed (max.): 10,000 rpm, number of slots in tool magazine: 22, Equipment: chip conveyor, documentation/manual, For sale: AXA DBZ milling machine - 2014 Heidenhain iTNC 530 HSC control 2 machining areas of 750x500 5-axis rotary table on one table (continuous) 22-tool magazine, SK40 Optical scales on all axes Mist extractor Chip conveyor High-pressure pump External coolant filtration unit Machine in good working order, under power = can be tested 3-month warranty Installation and commissioning at the customer's site possible Suitable for pendulum machining (machining on one table, loading on the other). Nwsdjy D Enhepfx Ab Uol

Condition: used, Year of construction: 2004, Milling machines Travel distance X: 880 mm Travel distance Y :630 mm Travel distance Z: 630 mm HSC-machines Number of axis: 5 milling machine / machining center Control: Heidenhain iTNC 530 table size X: 1250 mm table size Y: 700 mm tool changer: 32 - time Torque: 130 Nm control Heidenhain Universal machining center NC rotary table (C-axis) integrated into rigid table Swivel milling head (B-axis) SK40 tool holder Tool magazine: 32 (2x16 positions) Nwjdpfx Aozwqvnsb Uol Cooling unit Rotary table: 700 mm Max. table load: approx. 500 kg Speed range - main spindle: 20 - 12,000 rpm Feed rates: 20 - 15,000 mm/min Torque: 130 Nm Machine weight approx.: 9.0 tons Machine dimensions approx.: 4.0 x 3.0 x 2.5 meters

Condition: excellent (used), Year of construction: 2011, operating hours: 4,450 h, functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 240 mm, travel distance Z-axis: 360 mm, feed rate X-axis: 60 m/min, feed rate Y-axis: 60 m/min, feed rate Z-axis: 60 m/min, controller manufacturer: Heidenhain, controller model: iTNC530i, table load: 25 kg, rotational speed (min.): 250 rpm, spindle speed (max.): 42,000 rpm, operating hours of spindle: 4,400 h, coolant supply: 4 bar, number of spindles: 1, number of slots in tool magazine: 66, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, HSC milling machine Njdpfjzzknxox Ab Uswl HSM 400 U LP Milling spindle Steptec 42,000 rpm, 2 years old ITC & ITCX 5-axis thermal control Heidenhain TNC 530i control system Tool magazine 66X HSK40E Rotary table ITS 148 Minimum quantity lubrication Oil-mist extraction system Chip conveyor, manufacturer Phoenix Metall Water/water heat exchanger Measuring probe, infrared, manufacturer M&H 40.01 TX/RX Pallet magazine, 20 x ITS 148 Coolant and air supply from outside

Condition: used, Year of construction: 2014, operating hours: 43,665 h, functionality: fully functional, machine/vehicle number: 15175183874, travel distance X-axis: 1,800 mm, travel distance Y-axis: 1,100 mm, travel distance Z-axis: 900 mm, feed length X-axis: 1,800 mm, feed length Y-axis: 1,100 mm, feed length Z-axis: 900 mm, operating hours of spindle: 17,437 h, number of slots in tool magazine: 60, Equipment: chip conveyor, documentation/manual, 5-Axis Traveling Column Milling Machine DMG MORI DMF 180-7 | Year of Construction 2014 | B-Axis & Integrated Rotary Table For sale is a high-precision 5-axis traveling column milling machine from the manufacturer DMG MORI, model DMF 180-7, from the year 2014. The machine is extensively equipped and features a B-axis (swivel head) and a rotary table integrated into the fixed table for complex machining operations. General Machine Data * Manufacturer: DMG MORI * Model: DMF 180-7 * Year of Construction: 2014 * Machine Number: 15175183874 * Operating Hours: 43,665 h * Spindle Hours: 17,437 h * Machine Weight: approx. 13,250 kg Working Area & Dynamics * X-Axis: 1,800 mm * Y-Axis: 700 mm * Z-Axis: 700 mm Njdozyplgopfx Ab Ujwl * Rapid Traverse: 40 m/min * Acceleration: 4 m/s² Control System * Type: 3D Control Siemens SINUMERIK 840D sl * Control Panel: ERGOline Control with 19" screen * Software Options: Surface interpolation TRACYL, COMPCAD compressor function (for HSC machining), 3D machining/tool correction, turning-milling cycle Spindle & Milling Head (5-Axis Configuration) * Head: Swivel head (B-axis) * Speed: 20 to 14,000 rpm * Spindle Power: 18.9 / 14 kW (40/100% ED) * Tool Clamping: SK40 according to DIN 69871 Tool Table * Design: Fixed table with centrally integrated rotary table * Clamping Area Fixed Table: 2,100 x 700 mm * Rotary Table Diameter: 750 mm * Max. Load Capacity Rotary Table: 500 kg Tool Changer * Magazine Capacity: 60 positions SK40 * Type: Chain magazine with dual gripper * Chip-to-Chip Time: 7.6 s Coolant, Disposal & Extraction * Internal Coolant Supply (ICS): 40 bar / 980 l system with paper band filter * Chip Disposal: Chip conveyor (drag chain) * Extraction: Oil and emulsion mist separator (1,600 m³/h) * Additional Functions: Air blow through the spindle center (via M-function), coolant gun for chip flushing Additional Equipment & Measuring Technology * Measuring Probe: Infrared measuring probe TS649 DMG * Kinematic Measurement: Preparation for 3D quickSET Toolkit * Cabin: Full cabin with operating mode 4 From an insolvency proceeding, sale in open auction. Offer deadline until September 30, 2026, 6:00 PM. Package price for several machines from this proceeding is possible. Inspection: September 16, 2026, 10:00 AM – 12:00 PM, Fraunhoferstraße 10–12, 04178 Leipzig. Collection: October 6, 2026, 9:00 AM – 4:00 PM. Further information and offer submission can be found on our IKV Fester GmbH website under Auctions.

Condition: used, Year of construction: 2015, operating hours: 12,439 h, functionality: fully functional, travel distance X-axis: 250 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 200 mm, nominal power (apparent): 30 kVA, workpiece length (max.): 250 mm, workpiece width (max.): 250 mm, workpiece height (max.): 185 mm, operating hours of spindle: 12,439 h, number of slots in tool magazine: 20, input voltage: 415 V, type of input current: three-phase, Lumex Avance-25 by Matsuura, including automatic CAM software. For clarification: this is a machine that, during the melting process (all 10 layers in standard configuration with a layer thickness of 0.05 mm), also performs surface finishing through HSC milling. This means that the contour is milled to the exact dimensions every 0.5 mm, resulting in clean surfaces as typically seen in CNC milling. The Lumex Avance-25 is an excellent solution for those who want to participate in the world of hybrid additive manufacturing at the highest level. It combines laser sintering and milling in a single machining center. With its help, you can efficiently produce complex and precise parts while simultaneously benefiting from the flexibility and versatility of additive manufacturing. Details: Year of manufacture: 2015 Nwedpfezm Ub Hex Ab Usl Spindle hours: 12,439 Laser hours: 3,476 Build volume: 250x250x185 Gallery of manufactured components: alesco-gmbh.de/leistungen/additive-fertigung-3d-druck/ With its robust design and proven performance, the Lumex Avance-25 is an investment that pays off. It offers a combination of reliability, precision, and efficiency, making it an excellent choice for any workshop or production line. Please do not hesitate to contact us for further information or to arrange a visit. We look forward to helping you discover the potential of the Lumex Avance-25 for your company. Further inventory and prices can be found at: inventar-verkauf.de/id/alesco Voltage: 415 V Voltage tolerance: ±10 % Frequency: 50 Hz Frequency tolerance: ±1 Hz Number of phases: 3 Capacity: 30 kVA Current: 41 A Short-circuit current: 30 kA If you have any questions or require further information, please feel free to send us a message or call us.

Condition: used, Year of construction: 2011, operating hours: 20,155 h, functionality: fully functional, machine/vehicle number: E807024, travel distance X-axis: 800 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 400 mm, spindle speed (max.): 30,000 rpm, spindle speed (min.): 3,000 rpm, table width: 600 mm, table length: 850 mm, total height: 2,750 mm, total width: 2,870 mm, total length: 3,390 mm, type of input current: three-phase, workpiece weight (max.): 800 kg, overall weight: 7,500 kg, distance table to spindle center: 560 mm, input current: 63 A, For sale: a professional, high-speed machining center of the HSC (High Speed Cutting) class. The machine's main advantage is its exceptionally efficient spindle, reaching up to 30,000 rpm, mounted on a precise HSK-50E taper. Combined with a rigid and heavy construction (weight approximately 7,500 kg), the machine guarantees perfect surface quality, rapid milling speeds, and the ability to operate stably with micro-tools. An ideal choice for the precise machining of molds, dies, aluminum parts, light metals, and plastics. Technical specifications: Spindle and drive (main HSC advantage): • Spindle speed: 3,000 to 30,000 rpm (High Speed Cutting) • Spindle taper: HSK-50E (ensures excellent balance and safety at high speeds) • Spindle motor power: 15 kW Dimensions and working area: • Table dimensions: 850 x 600 mm • Maximum, uniform table load: 800 kg • Dimensions of T-slots: 16 mm x 5 pcs. • Footprint (overall dimensions): 3390 x 2870 x 2750 mm Travel ranges (axes): • X-axis travel: 800 mm Nwjdezuzp Hspfx Ab Uol • Y-axis travel: 600 mm • Z-axis travel: 400 mm • Distance from spindle to table surface: 160 – 560 mm Dynamics and accuracy: • Positioning accuracy: ±0.005 mm • Positioning repeatability: ±0.0015 mm • Maximum working feed rate: 20 m/min • Maximum rapid feed rate: 30 m/min Tool magazine and media: • Tool magazine capacity: 16 tools • Maximum tool diameter: Ø20 mm • Dielectric fluid tank capacity: approx. 200 liters Power supply and installation: • Power requirement: 45 kW • Preferred fuse rating: 63 Amp (time-delay “C”)

Condition: used, Year of construction: 2007, travel distance X-axis: 550 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, OPS Ingersoll OPS 550 – HSC Milling Machine (Year of Manufacture 2007) with Tool Changer & Extraction System Manufacturer: OPS Ingersoll Funkenerosion GmbH Model: OPS 550 Year of Manufacture: 2007 Machine No.: 655029 Made in Germany The OPS Ingersoll OPS 550 is a precise and powerful high-speed milling machine (HSC) designed to meet the highest demands in toolmaking, mold making, and precision component manufacturing. Featuring an integrated tool changer, a high-performance extraction system, and a user-friendly control unit, it provides optimal conditions for efficient and highly precise work. Equipment & Features Integrated tool changer with multiple tool positions Njdpjw I Sm Defx Ab Ujwl Extraction system for clean operation OPS control unit with screen, keyboard, and emergency stop Precise HSC machining for fine contours and complex shapes Robust machine construction for lasting precision Technical Specifications Power supply: 400 V, 3-phase, 50 Hz Control voltage: 24 V DC Rated current: 63 A Power consumption: 55 A Year of manufacture: 2007 Errors, typographical mistakes and prior sale excepted.

Condition: used, Year of construction: 2021, Milling machines Travel distance X: 550 mm Travel distance Y :550 mm Travel distance Z: 510 mm HSC-machines Number of axis: 3 milling machine / machining center Control: Siemens Sinumerik 828D spindle chuck: SK40 DIN 69871 spindle revolutions: 10000 rpm Speed range from: 20 U/min Speed range to: 10000 U/min table size X: 850 mm table size Y: 650 mm max. workpiece weight: 600 kg tool changer: 24 - time input Power : 13 kW Torque: 64 Nm Rapid traverse: 24 m/min feed rate: 24000 mm/min spindle cooling chip conveyor Njdpfx Ajzrvgueb Ujwl control Siemens 3 Axes Infrared Touch Probe System Tool Measurement System

Condition: used, Year of construction: 2007, RÖDERS RFM 600 with RCE 1 – High-speed machining center – 42,000 RPM – only approx. 1,370 operating hours For sale is a high-quality vertical high-speed machining center, a RÖDERS RFM 600 with RCE 1, manufactured in 2007. (An RFM 600 from 2003 is also available at the same location.) The machine is ideally suited for the highly precise machining of graphite, aluminum, non-ferrous metals, as well as hardened tool steels, and is used primarily in the tool, mold, and precision machinery industries. Technical data: Year of manufacture: 2007 Travel distances X/Y/Z: 600 / 450 / 300 mm Table: 700 x 550 mm RÖDERS CNC control HSK-40 spindle Spindle speed up to 42,000 RPM 20-position tool changer Max. workpiece weight 400 kg Nsdpjzk Eu Sofx Ab Uowl Machine weight approx. 6.5 t Equipment: RCE 1 rotary tool changer Smoke extraction Well-maintained overall condition Only approx. 1,370 operating hours Ideal for tool and mold making, electrode manufacturing, graphite machining, precision milling, and HSC/high-speed cutting. The machine can be inspected under power after prior appointment. Location: Germany Subject to prior sale. _____ Subject to prior sale and errors in the technical data. The technical data has been compiled to the best of our knowledge but does not constitute guaranteed characteristics. Our general terms and conditions apply; the seller is not liable for typing or data transmission errors. The appearance of the offered items corresponds to their age and the images shown. The technology and wear of the offered items are in accordance with their age. Used machines are sold exclusively to commercial customers and without warranty.

Condition: used, Year of construction: 2007, total height: 2,800 mm, total length: 3,000 mm, total width: 2,500 mm, overall weight: 8,300 kg, Mikron HSM 800 – High Speed Machining Center Year 2007 | Heidenhain iTNC 530 | 24,000 rpm | 3-pallet changer High-precision CNC machining center from Mikron / GF AgieCharmilles, designed for demanding HSC applications such as mold & die, graphite and electrode machining, as well as flexible production. Travels: X 800 mm / Y 600 mm / Z 500 mm with pallet size 800 x 600 mm. Equipped with a 3-pallet changer for efficient automated operation. The machine features a high-speed spindle up to 24,000 rpm with HSK-A63 interface and a 50-position tool magazine. Well equipped with high-pressure through-spindle coolant (18–70 bar) including band filter system, chip conveyor, minimum quantity lubrication, oil mist extraction, rotating viewing window and probing system (M&H). Additional features include APS (Advanced Process System) and ITC (Intelligent Thermal Control) for maximum process stability and thermal accuracy. Control: Heidenhain iTNC 530 Spindle speed: 24000 - rpm Travel Y-axis: 600 - mm Dimensions of the clamping surface: 900 x 600 mm Njdpfoy Tkc Aex Ab Uewl Travel Z-axis: 500 - mm Travel X-axis: 800 - mm Dimensions (LxWxH) approx.: 3000 x 2500 x 2800 mm Weight approx.: 8,300 kg Year of construction: 2,007 Condition: in working order Terms of payment: 100% prepayment before pick-up Terms of delivery: From foundation under power: Yes

Condition: ready for operation (used), Year of construction: 2010, operating hours: 29,000 h, controller manufacturer: SIEMENS, controller model: 840 D, spindle speed (max.): 12,000 rpm, It is a system composed by a HELLER MCH 350 and a HELLER MCH 350 featuring a 22 pallet system with 800x800 pallets. Both models include a 70 bar pressure system, with the MCH 350 reaching up to 12,000 RPM and the MCH 350 C up to 8,000 RPM. Consider the opportunity to buy this HELLER MCH 350 + MCH 350 C horizontal machining centre system. Contact us for more information about this system. Nwodpfx Abex D Skmj Ujl Additional equipment • Pallets: 22 of size 800x800 Machine Benefits Technical Machine Benefits • Pressure: 70 bar on both machines • Tool systems: 2 x 234 hsc 100 • Mch 350 c = 8000 rpm Extra Information MCH 300 Usage: 29000 hours MCH 350 C Usage: 22105 hours

Condition: refurbished (used), functionality: fully functional, 5-axis HSC milling machine Röders RXP500DS with linear direct drives in all axes and torque drives in the rotary axes. The machine will be completely overhauled, inspected, and measured in our workshop. The machine will once again meet new machine tolerances! Travel ranges: X450mm, Y400mm, Z240mm Distance spindle/table: approx. 315mm - Linear direct drives in all axes - wear-free - Tool changer, 42-position - Cooling unit for drives, milling spindle, and control cabinet - Measuring laser for fully automatic measurement of milling tools (length/diameter/contour/taper angle) as well as wear monitoring including tool cleaning before measurement - Handbox - Remote maintenance - Automatic 3D probe including calibration sphere in the tool changer - Minimum quantity lubrication - Emulsion cooling - Spindle HSK40E with max. 42,000 rpm - Spindle length compensation - Zero-point clamping system EROWA integrated into the machine table - Manual chuck control - Automation RC2 pallet changer for 45 Erowa ITS50 pallets - ideal for the production of electrodes An inspection of the machine in operational condition is possible at any time. You can also find information about the type and scope of our overhauled machines on our website or on our Hüttmann YouTube channel. Nwjdpfezmgt Ijx Ab Usl