Used Hsc for sale (173)

Condition: good (used), Year of construction: 1997, Portal center with high rigidity thanks to a cast construction and the latest technology in the area of control, vibration damping, dynamic axis movements and temperature stabilization of the machine frame. Even grinding is possible with high precision. Year of manufacture 1997 Renewed components: Milling spindle - entire control unit - guides Technical data - Travel ranges X 1,000 mm, Y 800 mm, Z 600 mm - Drive power 25 kW - Speed 30,000 rpm Tsdsvt Dwbepfx Airjd - Spindle mount HSK E 50 - Feed rate up to 30 m/min. Work table - Dimensions 1,200 mm x 1,000 mm - Max. workpiece weight 1,000 kg - Table with 3R system for workpiece clamping Control - RMS 6 Windows NT, including software for NC milling simulation in the latest version - Electronic hand control panel - Network card - Integrated workshop programming - Automatic spline interpolation - Windows NT enables direct milling path programming - Adjustable dynamics for high accuracy Machine structure - High machine rigidity due to portal construction in cast construction - Optimal vibration damping of the spindles due to cast-in special plastic - Temperature stabilization of the entire machine body - Crane loading possible Tool changer - 18 stations, dust-proof, with integrated measuring laser for tool length and diameter - Changing in sister tools, Dependent on tool life Equipment - Cooling unit for temperature stabilization - Fully protected cabin, cabin roof can be opened - Touching with 3D probe for quick setup - Integrated chip conveyor for easy disposal of chip waste Machine data - Space requirement (without service areas!) LxWxH approx. 4,200 mm x 3,350 mm x 4,200 mm - Weight approx. 13,000 kg - Connected load 50 kVA, 400V, 50/60 Hz The machining center is in very good condition and works reliably. There is no backlog of maintenance or repairs. A viewing under power and chip is possible by appointment. All tools and operating materials shown in the photos are not included in the scope of delivery of the machine. Technical changes and errors reserved.

Condition: good (used), Year of construction: 2006, travel distance X-axis: 415 mm, travel distance Y-axis: 340 mm, travel distance Z-axis: 355 mm, rapid traverse X-axis: 20 m/min, rapid traverse Y-axis: 20 m/min, rapid traverse Z-axis: 20 m/min, feed length X-axis: 40,000 mm, controller manufacturer: Heidenhain, spindle speed (min.): 42,000 rpm, For sale is a vertical CNC machining center, Exeron Digma HSC 300. The machine is in good condition. Technical details: • Machine Type: Vertical CNC machining center • Year of manufacture: 2006 • Control: HEIDENHAIN • X-axis travel: 300 mm or 415−480 mm • Y-axis travel: 300 mm or 340 mm • Z-axis travel: 300 mm or 355−400 mm • Rapid traverse (X/Y/Z): Up to 20 m/min • Feed range: Up to 40,000 mm/min • Spindle speed: Up to 42,000 rpm, high-frequency spindle • Spindle taper: HSK-40E • Tool changer: 30 positions • Max. workpiece weight: 500 kg • Total weight: 5,000 kg • Dimensions: 3,050 x 2,500 x 2,470 mm Transport and loading can be organized Europe-wide for an additional charge upon request. Prices are subject to VAT. Inspection is possible by appointment. Please contact us – our team will be happy to assist you. Trade-in or exchange possible! Machinery purchase & sales PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINERY AND MORE. Are you looking for a high-quality but affordable metalworking machine for your operations? Or are you looking to sell your machine? For more information or contact options, please visit our website. Tedpfxox Upy Nj Airjd

Condition: as good as new (ex-display), Year of construction: 2025, Machine is in the exhibition. Optimill F 110 HSC Premium CNC milling machine direct from the manufacturer. F 110 HSC - The OPTIMUM Premium CNC milling machine with Siemens SINUMERIK 828D control is characterized by performance, speed, precision and a long service life. - Heavy-duty design - High productivity - High reliability - Heavily ribbed, torsion-free machine base - Profiled rail with recirculating ball bearing for high rapid traverse speeds in all axes - High-torque servo drives in all three axes - Telescopic guideway cover on all three axes - Automatic lubrication - Massive, exact milling table with three T-slots, large dimensions and precision-ground - The portable, electronic handwheel with enabling switch and emergency stop switch makes it much easier to the run-in of programs considerably - Coolant device with chip flushing system and cleaning gun - Chip conveyor in belt design ensures efficient chip removal - Chip trolley - RJ45 plug connection and 230 V power connection - Closed switch cabinet with integrated heat exchanger ensures optimum temperature and prevents the ingress of dirt particles - Machine light in the work area - Additional package SIEMENS material liability for defects and free online/on-site service OSS Plus - 1-year Basic maintenance contract included in D/A/CH Milling spindle Inline spindle Machine data Electrical connection 400 V / ~50 Hz Total connected load 15 kVA Milling spindle Drive motor S1 operation 9 kW Torque drive motor S1 operation 57 Nm Drive motor S6-30% operation 21.2 kw Torque drive motor S6-30% operation 135 Nm Spindle holder SK 40 / DIN 69871 Internal spindle cooling option Drive motor S1 operation 10.5 kW Torque drive motor S1 operation 50 Nm Drive motor S6-30% operation 26.4 kW Torque drive motor S6-30% operation 125 Nm Cooling lubricant system Power of the coolant pumps, 2 pieces 900 W Delivery rate max. 35 l/min. Tank capacity 116 liters Cleaning pump Power of the cleaning pump 530 W Milling accuracy Repeat accuracy ± 0.005 mm Positioning accuracy ± 0.005 mm Tool changer Double arm gripper type Tjdpfxsymka He Airjd Number of tool positions 20 Tool diameter max. 78 mm Tool diameter (secondary positions free) max. 120 mm Tool length 300 mm Tool weight max. 8 kg Time tool change: tool to tool 2.5 seconds Travel distance X-axis 650 mm Y-axis 400 mm Z-axis 500 mm Feed drive Rapid traverse X-, Y-, Z-axis 48 / 48 / 32 m/min. Motor torque X- / Y- / Z-axis 11 Nm / 11 Nm / 20 Nm Feed forces X- / Y- / Z-axis 3.67 kN / 3.67 kN / 6.68 kN Speed range Speeds* 12,000 min-1 Pneumatics Air pressure 6 bar Air consumption per hour 6 - 8 kg/m³ Milling table Distance spindle - table 100 - 600 mm Table length x width 850 x 400 mm T-slot size / number / distance 18 mm / 3 / 100 mm Max. load 400 kg Dimensions Length x width x height 2,100 x 2,300 x 2,750 mm Total weight 4,300 kg

Condition: used, Year of construction: 2008, travel distance X-axis: 705 mm, travel distance Y-axis: 425 mm, travel distance Z-axis: 610 mm, controller manufacturer: Heidenhain, table width: 460 mm, table length: 1,260 mm, table load: 400 kg, overall weight: 5,200 kg, spindle speed (min.): 50 rpm, spindle speed (max.): 26,000 rpm, spindle nose: HSK-E50, number of slots in tool magazine: 28, tool diameter: 63 mm, Vertical Machining Center Manufacturer: FEHLMANN Model: PICOMAX 90-HSC Year of manufacture: 2008 Control system: Heidenhain iTNC 530 Technical details: X-axis travel: 705 mm Y-axis travel: 425 mm Z-axis travel: 610 mm Tsdpezq Hkhjfx Airsd Feed rate (X, Y, Z axes): 1 – 20,000 mm/min Feed force (X, Y, Z axes): 12,000 N Table clamping surface: 1,260 x 460 mm T-slots (quantity x width x spacing): 9 x 12-H8 x 50 mm Max. table load: 400 kg Distance floor – coordinate table: 1,026 mm Distance coordinate table – spindle nose: 92 – 702 mm Horizontal throat depth: 480 mm Spindle speed: 50 – 26,000 rpm Drive power – main spindle (100/40% duty cycle): 11.5 / 15.0 kW Max. torque S1/S6: 25.2 / 32.9 Nm Tool holder: HSK-E50 Number of tool positions: 28 Max. tool diameter: 63 mm Max. tool dia. with adjacent station free: 100 mm Tool length: 260 mm Tool weight: 3 kg Power rating: 22 kVA Weight: approx. 5,200 kg Additional information: In our assessment, the machine is in good used condition and can be inspected under power by appointment. Technical features & accessories: - Erowa automation - FEHLMANN ATS 160 CNC rotary table - incl. machine vices (see image 6) Accessories, pictured tools, and workholding devices are included in the scope of delivery only if stated in the additional information. Subject to technical changes, errors, and prior sale.

Condition: good (used), Year of construction: 2008, HIGH SPEED VERTICAL CENTER 42,000 RPM MACHINE PREPARED FOR LOADING AND UNLOADING PALLET OR PIECE THROUGH FANUC ANTHROPOMORPHIC Producer EXERON Model DIGMA HSC 300 Year 2008 Used condition Location/Users/giovanni/Desktop/Foto Usati 22/Digma HSC 300/PHOTO-2022-10-25-22-19-25 2.jpg /Users/giovanni/Desktop/Foto Usati 22/Digma HSC 300/PHOTO-2022-10-25-22-19-25 3.jpg /Users/giovanni/Desktop/Foto Usati 22/Digma HSC 300/PHOTO-2022-10-25-22-19-25 4.jpg /Users/giovanni/Desktop/Foto Usati 22/Digma HSC 300/PHOTO-2022-10-25-22-19-25 5.jpg /Users/giovanni/Desktop/Foto Usati 22/Digma HSC 300/PHOTO-2022-10-25-22-19-25 6.jpg /Users/giovanni/Desktop/Foto Usati 22/Digma HSC 300/PHOTO-2022-10-25-22-19-25 7.jpg /Users/giovanni/Desktop/Foto Usati 22/Digma HSC 300/PHOTO-2022-10-25-22-19-25 8.jpg /Users/giovanni/Desktop/Foto Usati 22/Digma HSC 300/PHOTO-2022-10-25-22-19-25 9.jpg /Users/giovanni/Desktop/Foto Usati 22/Digma HSC 300/PHOTO-2022-10-25-22-19-25 Tedpfx Aoizt Acjirsd /Users/giovanni/Desktop/Foto Usati 22/Digma HSC 300/PHOTO-2022-10-25-22-19-25 /Users/giovanni/Desktop/Foto Usati 22/Digma HSC 300/PHOTO-2022-10-25-22-19-25 /Users/giovanni/Desktop/Foto Usati 22/Digma HSC 300/PHOTO-2022-10-25-22-19-25 /Users/giovanni/Desktop/Foto Usati 22/Digma HSC 300/PHOTO-2022-10-25-22-19-25 /Users/giovanni/Desktop/Foto Usati 22/Digma HSC 300/PHOTO-2022-10-25-22-19-25 /Users/giovanni/Desktop/Foto Usati 22/Digma HSC 300/PHOTO-2022-10-25-22-19-25 /Users/giovanni/Desktop/Foto Usati 22/Digma HSC 300/PHOTO-2022-10-25-22-19-25 /Users/giovanni/Desktop/Foto Usati 22/Digma HSC 300/ /Users/giovanni/Desktop/Foto Usati 22/Digma HSC 300/Unknown.jpeg Villorba, Italy Price Category Vertical Machining Centers Subcategories Stock number 634 Serial number HEIDENAIN 530 steering unit Table size 470 X 400 X axis (strokes) 400 Y-axis (travel) 320 Z axis (strokes) 300 Spindle power KW 13 Maximum rotation speed 42000 Maximum tool magazine capacity 40 HSK 40E tool holder X-axis rapid traverse (rapid traverse) 30M/MIN Y-axis rapid traverse (rapid traverse) 30M/MIN Z-axis rapid traverse (rapid traverse) 30M/MIN 3 R SYSTEMS pallet changer Renishaw system RMP 60 READY Description HIGH SPEED VERTICAL CENTER 42,000 RPM MACHINE PREPARED FOR LOADING AND UNLOADING PALLET OR PIECE THROUGH FANUC ANTHROPOMORPHIC

Condition: good (used), Year of construction: 2001, The machine will be delivered including a new replacement spindle. Digma HSC 500, year of manufacture 2001, Heidenhain iTNC 530 control, travel X/Y/Z 500/400/350 mm, spindle speed up to 42,000 rpm, Todpsy A H Tpefx Aired tool holder HSK 40, laser diameter measurement, oil mist lubrication system, extraction for graphite machining, 3D infrared measuring probe, The tool cannot be released from the spindle; according to the service technician, this is not a spindle problem but a hydraulic issue. A new HSC replacement spindle is included.

Condition: as good as new (ex-display), Year of construction: 2022, Machine is on display. Optimill F 310 HSC Premium CNC milling machine, directly from the manufacturer. F 310 HSC – The OPTIMUM Premium CNC milling machine with Siemens SINUMERIK 828D control stands out for its performance, speed, precision, and long service life. • Heavy-duty design • High productivity • High reliability • Strongly ribbed, torsion-resistant machine base • Profile guideway with roller circulation in all axes for high load capacity • High-torque servo drives, directly mounted to ball screws on all three axes • Precision-ground, preloaded high-performance ball screws for high rapid traverse speeds on all axes • Telescopic guideway covers on all three axes • Main spindle SK40 with spindle speed up to 12,000 rpm with inline spindle • Massive, precision-ground milling table with five T-slots, large dimensions • Portable electronic hand wheel with enabling button and emergency stop switch, significantly simplifies program setup • Tool changer arm gripper with 30 tool positions • Coolant unit with chip flushing system and cleaning pistol • Through-spindle coolant with 20 bar pressure • Belt-type chip conveyor ensures efficient chip removal • Chip trolley • Oil separator • Machine light in the work area • Additional SIEMENS package: material defect warranty and free online/on-site service OSS Plus • 1-year maintenance contract Basic included for DE/AT/CH Control • 15.6" color display • 16:9 format Total package • Safety Integrated • Raw material recognition and processing • ShopMill step programming • Network drive management • 3D simulation • Drawing function Equipment details • Inline spindle • Taper SK 40 / DIN 69871 • Spindle speed 12,000 rpm Dimensions and weights • Length approx. 4319 mm • Width/depth approx. 2300 mm • Height approx. 3000 mm • Weight approx. 7000 kg Rapid traverse speed • X-axis 30 m/min • Y-axis 30 m/min • Z-axis 30 m/min Electrical data • Supply voltage 400 V • Mains frequency 50 Hz • Total connected load 56 kVA Horizontal milling table • Length 1200 mm • Width 600 mm • T-slot size 16 mm • Number of T-slots 5 • T-slot spacing 100 mm • Max. load capacity 800 kg Accuracy • Repeatability ± 0.005 mm • Positioning accuracy ± 0.005 mm Tedpoynf Unsfx Airsd Travel • X-axis automated 1050 mm • Y-axis automated 600 mm • Z-axis automated 600 mm Vertical spindle • Spindle taper SK 40 DIN 69871 • Speed range 12,000 rpm • Drive motor output continuous S1 20 kW • Drive motor output S6-30% operation 50.3 kW • Drive motor torque continuous S1 96 Nm • Drive motor torque 30% operation S6 240 Nm Feed force • Feed force X-axis 6.68 kN • Feed force Y-axis 6.68 kN • Feed force Z-axis 10 kN Feed motor torque • X-axis continuous S1 18 Nm • Y-axis continuous S1 18 Nm • Z-axis continuous S1 27 Nm Tool changer • Double arm gripper • Number of tool positions 30 • Maximum tool length 300 mm • Maximum tool weight 8 kg • Tool-to-tool change time 2.5 s

Condition: new, Year of construction: 2026, functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 330 mm, About Us Since 2014, we have been developing and manufacturing our machines in Austria as a machine manufacturer. In addition to our standard machines, which can be individually customized, we are also able to offer special solutions. We would be happy to send you our product catalog; simply contact us. HSC 544HP Machining Center 3rd Generation Key Data - 500x400x330mm travel range - BT30 spindle with 20,000 rpm and 10.5 Nm (other spindle types available) - 18-tool magazine - Feed rate up to 25 m/min - Compact dimensions of W 1,460 x D 1,470 x H 2,110 mm and a weight of approximately 2,200 kg The machines are configured and assembled according to customer specifications. Depending on the requirements, numerous options are available, such as different spindle types up to 60,000 rpm, different cooling systems, direct path measuring system, integrated automation, etc. Control System - CS-Lab / AMT - Clear and customizable user interface and easy operation via touchscreen - S-curve acceleration for dynamic axis movement while maintaining high accuracy - Integration of, for example, robots, pallet changers, workpiece changers, etc. is possible Machine Frame - Solid machine frame made of mineral casting, optimized by means of FEM simulations - Very high vibration damping, stiffness, and ideal thermal behavior - Use of roller guides instead of conventional ball guides for maximum stiffness - High-speed ball screws with reduced heat generation Tedpezu Ikwofx Aired Drive System - AC servo drives, well-matched to the axes, for high contour accuracy - Directly driven and backlash-free ball screws Overview of Spindle Types 60,000 rpm I 0.3 Nm 40,000 rpm I 0.9 Nm 36,000 rpm I 2.4 Nm 30,000 rpm I 3.5 Nm 30,000 rpm I 6.0 Nm 20,000 rpm I 10.5 Nm We would be happy to provide you with expert and comprehensive advice in order to offer you the perfect solution for your machining task.

Condition: excellent (used), Year of construction: 2020, operating hours: 6,561 h, volume flow: 5.6 m³/h, operating pressure: 10 bar, pressure (max.): 10 bar, HERTZ HSC 37 screw compressor 37 KW engine, Tedpfxetqn Swj Airjd Capacity 5.6 m3/min, Pressure 10 BAR. Year of production 2020 Mileage 6561 hours The compressor is fully functional, practically like new, exhibition condition.

Condition: used, Year of construction: 2013, x-travel 6000 mm Todpfxoyr Aq Ue Airsd y-travel 4750 mm z-travel 1500 mm control Siemens 840 D SL Table Verschiebetisch table load max. 20 t Tool changer 120 pos. tool taper SK 50 size of pallet 2200x1500 mm spindle power 46 kW Aggregate (pick-up max. 5 positions): Ortho head 1x1 degree Short vertical milling attachment Heavy angle head Long angle head The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: excellent (used), Year of construction: 2015, operating hours: 9,500 h, functionality: fully functional, travel distance X-axis: 1,020 mm, travel distance Y-axis: 830 mm, travel distance Z-axis: 240 mm, feed rate X-axis: 30 m/min, feed rate Y-axis: 30 m/min, feed rate Z-axis: 30 m/min, total length: 2,080 mm, total width: 1,990 mm, spindle speed (min.): 1,000 rpm, spindle speed (max.): 40,000 rpm, total height: 2,000 mm, rapid traverse X-axis: 44 m/min, rapid traverse Y-axis: 44 m/min, rapid traverse Z-axis: 44 m/min, overall weight: 2,100 kg, spindle motor power: 3,000 W, We are selling our Datron M10 Pro with HSC control. The machine is in excellent condition, still in use, and can therefore be inspected while powered on. We are gradually replacing our machine park, which is why we are offering this machine for sale. It has seen very little use, as it was primarily used to machine brass with a cutter diameter of 3mm. Maintenance has been carried out at regular intervals. The spindle is 2 years old and has only 1,500 hours of operation. Tedpfjz Epwkox Airsd Delivery terms: ex works, transport insurance only, no warranty. Subject to errors in the technical data.

Condition: as good as new (ex-display), Year of construction: 2025, Machine currently on display. Optimill F 300 HSC Premium CNC milling machine, direct from the manufacturer. F 300 HSC – The OPTIMUM Premium CNC milling machine with Siemens SINUMERIK 828D control features outstanding performance, speed, precision, and long service life. • Heavy-duty construction • High productivity • High reliability • Strongly ribbed, torsion-resistant machine base • Linear guideways with roller recirculation on all axes for high load capacity • High-torque servo drives directly coupled to the ball screws in all three axes • Precision-ground, preloaded high-performance ball screws for rapid traverse speeds on all axes • Telescopic guideway covers on all three axes • Main spindle SK40 with spindle speed up to 15,000 rpm, inline spindle • Solid, precision-ground milling table with five T-slots, generously dimensioned • Portable electronic handwheel with enabling switch and emergency stop impact switch significantly simplifies program setup • Automatic tool changer with double-arm gripper, 30 tool stations • Coolant unit with chip flushing system and cleaning gun • Through-spindle coolant 20 bar • Belt-type chip conveyor ensures efficient chip removal • Chip cart • Oil separator • Machine light in working area • Additional SIEMENS warranty package and free online/on-site service (OSS Plus) • 1 year basic maintenance contract included for Germany, Austria, Switzerland • Control unit • 15.6" color display • 16:9 format • Complete package • Safety Integrated • Remainder material detection and processing • ShopMill operation step programming • Network drive management • 3-D simulation • Program tracing • Additional Siemens OSS PLUS package • 12 months; Item No. 3589020 • 24 months; Item No. 3589021 • 36 months; Item No. 3589022 Equipment details • Inline spindle • SK 40 / DIN 69871 spindle taper • Spindle speed 15,000 rpm Dimensions and weight • Length approx. 2856 mm • Width/depth approx. 2300 mm • Height approx. 2850 mm • Weight approx. 6500 kg Rapid traverse speed • X-axis 36 m/min • Y-axis 36 m/min • Z-axis 32 m/min Electrical data • Supply voltage 400 V • Mains frequency 50 Hz • Electrical connection • Total connected load 30 kVA Milling table (horizontal) • Length 1200 mm • Width 600 mm • T-slot size 18 mm • Number of T-slots 5 Tjdpfxeymd Epe Airjd • T-slot spacing 100 mm • Maximum load capacity 800 kg Accuracy • Repeatability ± 0.005 mm • Positioning accuracy ± 0.005 mm Travel • X-axis (automatic) 1000 mm • Y-axis (automatic) 620 mm • Z-axis (automatic) 630 mm Vertical spindle • Spindle taper SK 40 DIN 69871 • Speed range 15,000 rpm • Continuous operation motor power (S1) 20 kW • Motor power (S6-30% duty cycle): 52.4 kW • Continuous torque (S1): 96 Nm • Torque at 30% duty cycle (S6): 250 Nm Feed force • X-axis feed force: 6.68 kN • Y-axis feed force: 6.68 kN • Z-axis feed force: 12.01 kN Feed drive torque • X-axis continuous operation (S1): 20 Nm • Y-axis continuous operation (S1): 20 Nm • Z-axis continuous operation (S1): 36 Nm Tool changer • Double-arm gripper • Number of tool stations: 30 • Max. tool length: 300 mm • Max. tool weight: 8 kg • Tool-to-tool change time: 2.5 seconds

Condition: refurbished (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: 025, travel distance X-axis: 800 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, controller manufacturer: Heidenhain, controller model: iTNC530, total height: 2,800 mm, total length: 3,000 mm, total width: 2,500 mm, table width: 600 mm, table length: 800 mm, table load: 800 kg, overall weight: 9,500 kg, spindle speed (max.): 36,000 rpm, operating hours of spindle: 9 h, spindle nose: HSK 50E, number of spindles: 1, number of slots in tool magazine: 30, input voltage: 400 V, type of input current: AC, Equipment: chip conveyor, documentation/manual, For sale is a used high-speed machining center from the manufacturer MIKRON. High-precision CNC machining center from Mikron / GF AgieCharmilles, designed for demanding HSC machining in toolmaking, graphite and electrode machining, as well as for flexible series production. Additionally equipped with APS (Advanced Process System) and ITC (Intelligent Thermal Control) for maximum process reliability and thermal stability. At “Der Spindel Doctor”, a Step-Tec spindle (a key component of the machining center) was professionally overhauled (report and invoice included) and put back into operation after balancing and inspection. The machine will be completely set up and tested according to the Mikron protocol. During the machine inspection, many wear parts were replaced: Tedpjz Dx Shjfx Airsd X-axis encoder and scale, pneumatic cylinders on the tool changer, tool holders, pneumatic maintenance unit, pneumatic hoses, MMS hoses, water hoses, etc. The machine is energized and can be inspected and tested. By arrangement, the machine can be put into operation at your location. Accessories: 4-position pallet changer II Table chuck Preparation for PS 32.00 measuring probe Mobile handwheel Blum laser tool measurement system Spindle cooling unit Minimum quantity lubrication - Unilub Oil mist extraction Optical operating mode indicator Air nozzle on the spindle slide Chip conveyor (including coolant tank) General overhaul of the spindle

Condition: excellent (used), Working travels 700 x 420 x 610 mm Table size 1260 x 490 mm Spindle taper HSK E50 Tsdpfxoxpud Hj Airjd Spindle speeds 50-36'000 U/min Tool changer 42 Pos. Control HEIDENHAIN iTNC 530 3D measuring tracer Tool breakage control Tool length and diameter measuring device MARCELS MASCHINEN CH

Condition: used, Kortho Graphicjet X-18 Inkjet Printer High-resolution inkjet printer for absorbent and smooth surfaces The most advanced Hi-Res inkjet printer for prints up to 18mm high The X-Series Graphicjets, introduced in 2015, are Kortho's newest and most advanced Hi-Res inkjet printers. From a mechanical engineering perspective, the X-Series printers, with their capillary ink system, represent an evolution of our proven 18P model. However, the X-Series printers feature a Windows operating system. Furthermore, its NiceLabel Windows driver enables this printer to print directly from any Windows software or ERP system. The X-Series features an 8" color touchscreen with integrated label management and design functions. This eliminates the need for external devices or connections during standalone operation. In addition, this printer can print at a speed of up to 60 meters per minute, up to 120 m/min at lower resolution. Features of the Kortho Graphicjet X-18 Inkjet Printing area of 18 x 1000 mm Resolution of 185 DPI Printing speed of up to 60 meters per minute (at full resolution), up to 120 m/min at lower resolution Prints on cardboard (boxes), paper, and many other absorbent materials A compact printhead housing and 60 cm supply cable ensure easy installation Its non-contact capillary ink system ensures that this printer is not affected by changing environmental conditions Oil-based inks and mineral oil-free inks available User-friendly 20 cm TFT touchscreen in any language you desire Starts within seconds Extensive graphics, text, and barcode functions Windows-based operating system Equipped with a Windows driver for network integration Tsdpfx Astpwt Ioirod Equipped with an Ethernet port as well as USB ports 100% NiceLabel compatible On-screen label design and management software (no external device required) Low running costs and low maintenance Longest service life and reliability on the market Made from the best materials (such as stainless steel) Serialization option via variable printing and bidirectional communication with ERP systems CE certified More items in other sizes - new and used - can be found in our shop! International shipping costs available upon request!

Condition: used, maximum load weight: 16,630 kg, overall weight: 22,000 kg, axle configuration: 1 axle, first registration: 07/2019, next inspection (TÜV): 04/2026, total length: 11,230 mm, total width: 2,550 mm, total height: 3,405 mm, Equipment: ABS, * TRIDEC ST-1510-TTDK forced steering system * EDSCHA sliding roof * Rear roller shutter * Fixed front bulkhead ----* Tire size: 275/70R22.5 * Technically permissible total weight: 22,000 kg * Unladen weight: 5,370 kg * Overall length: 11,230 mm Tjdpfx As Ahd Ehsirod * Next inspection due: / ----Vehicle number: 12535----Errors and prior sale excepted----Advertisements and various lettering have been digitally removed.-----We are happy to assist you with all the formalities involved in purchasing a vehicle. Simply let us know your wishes and suggestions, and we will take care of them. Among other things, we can offer you the following services for an additional charge:----Trade-in of your old vehicle, TÜV/SP inspection, complete export processing, arranging financing, applying for export license plates, vehicle transport, vehicle registration, recovery and vehicle transport services.----?YOUR VTS TEAM

Condition: used, Weighing station for the food industry The Top Control scale is a professional weighing solution for applications within the food industry. It consists of a colour touchscreen indicator on a stainless steel frame with a weighing platform and product tray. Thanks to its robust construction and user-friendly operation, this machine is suitable for a variety of weighing and packaging processes. Located in Emmeloord, the Netherlands. Immediately available, price on request. More photos and full specifications: / Type: Weighing scale / weighing station Indicator: Top Control colour touchscreen Tsdpfxoz Ndg Uo Airsd Construction: Stainless steel frame with weighing platform and product tray

Condition: good (used), Year of construction: 2001, travel distance X-axis: 650 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, For sale is a machining center with Gentry design of the DMC brand and type 65V linear Particularly noteworthy is the high-speed spindle with 18,000 rpm The machine is in good condition and fully functional Technical data Tedpfxet I Tple Aired Commissioning: 2001 Control: Heidenhain TNC 430 i Table size: 850x600 mm Tool holder: SK 40 Tool changer: 30-fold Travel X/Y/Z: 650x500x500 mm Max. speed: 18,000 1/min Feed rate max: 60 m/min Dimensions lxwxh: 2650x2700x2500 mm Weight: 10,500 kg On request, for an extra charge, dismantling, loading & transport can be organized for you throughout Europe Prices plus VAT Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale BUYING / SELLING PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website

Condition: used, This listing is for 1 of 2 Velp Scientific HSC Heating Magnetic Stirrer. The unit is in full working condition and is ready for immediate release. The Velp Scientific HSC Heating Magnetic Stirrer is an analogue heating magnetic stirrer designed for basic heating and stirring applications in chemistry, biology, and pharmaceutical laboratories. It features a rugged design with a ceramic heating plate that resists acids, bases, and solvents, and a techno-polymer casing that resists chemicals, scratches, and surface abrasions. Key Specifications Maximum temperature: 400°C Stirring volume: up to 15 liters Stirring speed: up to 1300 RPM Heating control: Analog Ceramic hot plate: Square-shaped and resistant to chemicals and scratches Todpoxx Ai Nefx Airjd Power supply: 115V/60Hz Dimensions: 8x3.7x13.5 inches

Condition: used, Siemens Simatic 6AV7872-0BC12-1AC0 Touch Panel PC, Touch 15", 677B Series, P6 Tedpfx Aed I Huzjirod 6AV7872-0BC12-1AC0 Touch 15" Panel PC 677B Version 03 You can find more new and used items in our shop! International shipping costs available upon request!

Year of construction: 2025, condition: new, functionality: fully functional, Currently available for immediate delivery - HSC 350MG from NCmind! our smallest and “lightweight” machine. With only 900kg still easy to handle but solid and strong enough for outstanding surface quality. The mineral die cast basement and portal structure are rigid and vibration damping. With traverse paths of 380 mm x 350 mm x 180 mm, it is the universal companion and should not be missing in any workshop! The 40-station HSK-E25 tool changer belongs to standard equipment as well as a water cooled 40.000rpm spindle with up to 6kW power. The HSC 350 is also extremely space efficient! With only 1060mm x 960mm x 2100mm (LxWxH, without operators panel) it fits through almost every door! More information in the pdf, by e-mail or by phone - NCmind GmbH Tedpfem Hd Ifex Airjd

Condition: good (used), Year of construction: 1984, functionality: fully functional, Table size 2000 x 650 mm Table longitudinal travel 2000 mm Tjdoyr Iqmjpfx Airod Stone transverse travel 650 mm Max. working height 550 mm Stone scraper integrated in the head Machine weight approx. 15,500 kg Dimensions (L x W x H) = 6000 x 2400 x 2900 mm Accessories - Magnetic table - Built-in dresser unit - Wheel with flange - Hydraulic unit - Separate control cabinet Good condition. The machine will be sold due to company liquidation.

Condition: excellent (used), Year of construction: 2011, operating hours: 4,450 h, functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 240 mm, travel distance Z-axis: 360 mm, feed rate X-axis: 60 m/min, feed rate Y-axis: 60 m/min, feed rate Z-axis: 60 m/min, controller manufacturer: Heidenhain, controller model: iTNC530i, table load: 25 kg, rotational speed (min.): 250 rpm, spindle speed (max.): 42,000 rpm, operating hours of spindle: 4,400 h, coolant supply: 4 bar, number of spindles: 1, number of slots in tool magazine: 66, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, HSC milling machine HSM 400 U LP Milling spindle Steptec 42,000 rpm, 2 years old ITC & ITCX 5-axis thermal control Heidenhain TNC 530i control system Tool magazine 66X HSK40E Tedpfxjzzknxj Airsd Rotary table ITS 148 Minimum quantity lubrication Oil-mist extraction system Chip conveyor, manufacturer Phoenix Metall Water/water heat exchanger Measuring probe, infrared, manufacturer M&H 40.01 TX/RX Pallet magazine, 20 x ITS 148 Coolant and air supply from outside

Condition: excellent (used), Year of construction: 2021, HT45-G3-SM2Y/FANUC WITH POWERED TOOLS AND Y-AXIS CNC turning machine for complete machining of turning-milling parts with 2 spindles, 2 tool systems, 6 linear axes and 2 rotary axes, integrated spindle motors on main and counter spindle (water- cooled), pre-tensioned roller guides. Drive power: Main spindle - 15 kW Counter spindle - 15 kW Speed range: Main spindle 0 – 7000 min-1 Counter spindle 0 – 7000 min-1 Spindle connection (DIN 55026): Main spindle: KK 5 (max. bar diameter ø 45 mm) Counter spindle: KK5 Y-axis: • Travel range: +40/-40 mm • Rapid traverse speed: 15 m/min Includes: • Draw tube on the main spindle • Pull rod for the main/counter spindle • Mechanical spindle brake (main/counter spindle) • Part ejector and flushing through the counter spindle • Fanuc 31i-B control - EMCONNECT/APP based user interface - Manual Guide i dialog programming Tsdpfjz Rzh Hjx Airod - 22" Multi-Touch Display - USB interface - Network drive / Ethernet - 3D Simulation - LED status bar, and more • 2x 12-position tool turret VDI 25 radial with direction logic for up to 2x12 powered tool stations (HSC turret)! Swivel speed adjustable with feed switch! Performance data: - Max. speed: 8000 rpm - Max. continuous speed: 6000 rpm - Max. drive power: 4 kW - Max. torque: 16 Nm - C-axis for main and counter spindle - TRANSMIT software for easy C-axis programming • Chip conveyor with a discharge height of 1100 mm, programmable (Type "hinge belt") • Coolant system integrated in the chip conveyor 2 high-pressure pumps with 14 bar 2 flushing pumps with 3.7 bar • Air gun with spiral hose • LED machine room light • Hydraulic unit • Vibration-damping leveling feet • Mounting angle and high-performance anchors • Documentation / CE certificate Year of construction: 2021 Machine no. S3K212051 Includes: various accessories

Condition: used, As-new CNC Vertical Machining Center, Milling Machine VMC, BAZ, HSC Milling, Machining Center TAIKAN B540Z Serial No. 1171009 Year of manufacture: 2017 CNC path control: SIEMENS Sinumerik 828 D Basic Travel range for working area X: 488 mm, Y: 400 mm, Z: 230 mm X-axis travel for tool change position X: 540 mm Table size 520 x 400 mm Spindle taper ISO 25 Todpfx Aiow Ed U Nersd Distance spindle nose - table 165 - 395 mm Max. spindle speed 36,000 rpm, infinitely variable Feed rate 0 to 10,000 mm/min Rapid traverse 15 m/min Table load capacity 200 kg Max. tool length 120 mm Max. tool diameter 80 mm Max. tool weight 0.8 kg Tool change time approx. 10 sec. Axis drives 0.8 kW each Spindle drive 3.5 kW at 100% duty cycle Electrical connection 400 Volt, 50 Hz, 7.5 kW CNC path control SIEMENS Sinumerik 828 D Basic - Software: NCU V04.05+SP06+HF01 - Interfaces: LAN, USB and CF-Card - Measuring system for tool setting: METROL tool sensor - Vertical milling spindle = high-frequency spindle with liquid cooling and external recooling unit - Tool changer with 13 tool stations - Electronic handwheel - Coolant system - Protective enclosure with sliding door - Central lubrication - incl. 10 tool holders ISO 25 with ER20 collet chuck and a set of collets Transport dimensions (L x W x H): 1800 x 1500 x 2300 mm Weight: 2,900 kg Excellent condition – as new Machine comes from a showroom with very few operating hours.